12 best unbranded arduino kits

Product description

Earth's 2nd Biggest Starter Kit for Arduino.

Monster package with everything you need to get serious with programming electronics and exploring the Arduino system.

Monster Includes:

Arduino-compatible UNO R3, MEGA 2560, NANO V3

ESP32

ESP8266 NodeMCU

HC05 Bluetooth Module

ESP8266 Wifi Module

W5100 Ethernet Shield

2x NRF24L01 Wireless Transceiver Module

RC522 RFID Kit

IR Remote Kit

Protoshield

4x4 Keypad

1602 LCD w/ i2C Backpack

Ultrasonic Range Sensor

Sound Sensor

PIR Motion Sensor

Impact Switch Switch Sensor

Photo Interrupter Sensor

GY68 Barometric Pressure Sensor

Line Tracking Sensor

IR Flame Sensor

Hall Effect Sensor

DHT11 Temperature & Humidity Sensor

Vibration Sensor

IR Obstacle Avoidance Sensor

MQ3 Alcohol Sensor

MQ9 Combustible Gas Sensor

Soil Moisture Sensor

Rain Level Sensor

GY521 3-Axis Gyro & Accelerometer Module

ISD1820 Voice Recording Module

DS3231 Real Time Clock Module

Rotary Encoder Module

Laser Diode Module

1 Digit 7 Segment LED Display

4 Digit 7 Segment LED Display

MAX7219 8x8 LED Matrix Display

5V DC Hobby Motor

5g Servo

5V DC Stepper Motor + ULN2003 Stepper Motor Driver

9V 1A Power Supply

5V 1-Channel Relay Module

USB Charger Doctor

Piezo Buzzer

700-Point Breadboard

PS2 Joystick

Shift Register

L239D Motor Driver

NPN Transistor

Thermistor

9V Battery Connector

4G USB Drive

2x Photoresistor

2x Ceramic Disk Capacitor

1N4004 Diode

30x Resistor (100R, 220R, 1K, 4.7K, 10K, 47K,100K,1M)

3x LED White, Red, Yellow, Green, Blue

2x RGB LED

6x Breadboard Button

2x Potentiometer (10K, 100K)

2x 3-Pin Slider Switch

2x 40-Pin Male Header

40x Female-Male Jumper Wires

40x Male-Male Jumper Wires

40x Female-Female Jumper Wires

• Advancing the development of robotics technology w/ Earth's 2nd biggest & most advanced starter kit for Arduino. 65+ pieces w/ FOUR main boards: 100% Arduino-compatible Uno R3, Mega 2560, Nano V3 and ESP32 2.4 GHz WiFi+Bluetooth Development Board
• Explore programming electronics with all of the most common sensors and modules in Arduino like RFID Card-Key Reader, Ultrasonic Sensor, Real Time Clock, Impact Switch, 3-Axis Accelerometer, LCD, Relay, Servo and Stepper Motor - suitable for beginner or advanced users
• Build wireless IoT Automation projects with ESP32 Development Board, HC-05 Bluetooth Module, ESP8266 Wi-Fi Module, 2x NRF24L01 Wireless Transceivers and the W5100 Ethernet Shield
• All-in-one bundle with extra accessories + 16G USB storage with free access to the GAR Dropbox Cloud including PDF guides & links to tutorials and videos to help you learn to program all the parts and get started quickly
• Effective technical/customer support from USA with lifetime replacement guarantee on all parts – The Monster comes in 16" x 12" durable organizer tool box for safe transport and storage. No soldering required. Please let us know about any improvements we can make to the Monster Kit. Critical feedback is much appreciated

User questions & answers

Question:	Dose this come with instructions for projects that can be made with the parts? or do you have to come up with your own things to make
Answer:	It's a generic arduino uno, not made by the Arduino company. So far it works fine for me, but i've only been playing with it for two weeks.
Question:	Is this Arduino kit safe to take on Scandanavian airlines? Also, is anything flammable, corrosive, radioactive
Answer:	Board holder dimension: 13.4 cm X 17 cm
Question:	My MacBook is not recognizing this unit (the uno piece), has anyone else experienced this
Answer:	I am sorry it could be not shipped to morocco.
Question:	what ages ai this good for
Answer:	Good day Jose, I am not sure what your problem is with this mini cd, so l will just list some reasons and perhaps you can identify a solution. 1) Because this CD is smaller than the standard size, it can't be inserted directly into the slot of enclosed types of CD drives. The type of CD drive that you need to use are the drives that pop out like a small draw and the disc is then clipped directly onto the centre of the drive, then the drive is pushed closed. All laptop computers use this style of CD. 2) After you insert the mini CD, if it does not run automatically, then click on your desktop icon for "my compuer" and all your drives will be displayed, look for your CD drive icon and click on that, then your CD will run and the files on the disc will be displayed, then click on what ever file you want to see. 3) I can't think of any other issue that you may have, unless you have a faulty CD, however, if this was the case, your computer would report some sort of error messag. Hope this helps

Product description

Established in 2011, ELEGOO is a thriving technology company dedicated to open-source hardware research & development, production and marketing. Our own Quality Management Team will secure the premium quality of our products and we would like to receive your valuable suggestions for our products and make your idea come true component listing: 1pcs Mega 2560 Controller Board 1pcs USB Cable 1pcs Breadboard 1pcs 65 Jumper Wire 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Tilt Switch 1pcs Photo resistor 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs Button (small) 10pcs Resistor (10R) 10pcs Resistor (100R) 10pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 5pcs Female-to-male DuPont Wire.

• The MEGA2560 complete starter kit with more than 200pcs components, premium quality and 100% Compatible with Arduino IDE
• Free pdf tutorial in the cd (more than 35 lessons)
• Lcd1602 module and gy-521 sensor module with pin header ( no need to solder by yourself)
• Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, IC, buttons, diodes, etc.
• We have always cared about the customer experience and improve the product function details

User questions & answers

Question:	would this kit be appropriate for adult or would it be to easy
Answer:	Hi there! We're always working to test new devices, but right now the app is only compatible with Android and iOS devices. For a full list, visit LEGO.build/DeviceCheck. Kind regards, Emily LEGO® Customer Service
Question:	Can this kit be programmed with the arduino software (ide) available on arduino's page
Answer:	Hi there! This LEGO® set includes 9 characters, 3 vehicles, and building instructions. It also has a movie stage with a swiveling camera stand, a double-sided backdrop, and arms to move the ships and characters. The app is free to download through Google Play or the Apple App Store. For a list of requirements and compatible devices, take a peek at LEGO.com/DeviceCheck. Kind regards, Emily LEGO® Customer Service
Question:	Can children younger than 15 use this or is it too complicated
Answer:	Hi there! The app is currently only available for Android and iOS smartphones, though our developers are always looking to try it on new devices, and a tablet version may be available in the future. A tablet won't fit in the holder included in the set, though with some creativity and extra parts, you may be able to modify it a bit. Kind regards, Emily LEGO® Customer Service
Question:	The instruction cd i got along with this kit is blank. i'm unable to access any of pdf, code or libraries. how can i download this
Answer:	This is not a mini lego set. This arrives in a big box. Buy from Amazon seller Acebeach for same day shipping and handling.

Product features

Starter kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo MEGA 2560 Starter Kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists compatible with Arduino projects, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics to take their first steps on electronics journey!

The most complete starter Kit with high quality components and sensors

Quantity and quality are both important here in Elegoo MEGA 2560 starter kit. The most essential parts in this kit are MEGA 2560 controller board and expansion board, which is a perfect clone with excellent product finish Compatible with Arduino projects. Besides, we offer other over 60 kinds of components and sensors from small parts like LED diodes, resistors and potentiometer to big parts like LCD1602, RFID module and 830 tie-points breadboard, which meet your demands for your different projects either it is simple or complex.

Sturdy quality is definitely the most important thing to Elegoo even with so many components provided we never compromised on the quality. Instead we keep improving our product quality in our own factory and we produce the products by ourselves under high standards and strict quality control. Pins and wires on some of the parts like LCD16502 and motors have been pre-soldered which is very convenient and saves your time.

LCD1602 Display module

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

Lining up the display with the top of the breadboard helps to identify its pins without too much counting, especially if the breadboard has its rows numbered with row 1 as the top row of the board. Do not forget, the long yellow lead that links the slider of the pot to pin 3 of the display. The 'pot' is used to control the contrast of the display.

DC Motors and L293D Transistor

In this project you will learn how to control a small DC motor using a Mega2560 board and a L293D transistor, which is a very useful chip. It can actually control two motors independently. We are just using half the chip in this lesson, most of the pins on the right hand side of the chip are for controlling a second motor.

L293D is quadruple high-current half-H drivers and designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is also designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V and drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.

74HC595 Shift Register and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it!

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

Product description

Component listing: 1pcs UNO R3 Controller Board 1pcs LCD1602 Module ( with pin header) 1pcs Breadboard Expansion Board 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs Joystick Module 1pcs IR Receiver 1pcs Servo Motor (SG90) 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Ultrasonic Sensor 1pcs DHT11 Temperature and Humidity Module 1pcs 9V Battery with DC 1pcs 65 Jumper Wire 1pcs USB Cable 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs Potentiometer 1pcs 5V Relay 1pcs Breadboard 1pcs Remote 1pcs Tilt Switch 5pcs Button (small) 1pcs 1 digit 7-segment Display 1pcs 4 digit 7-segment Display 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 2pcs Photo resistor 1pcs Thermistor 2pcs Diode Rectifier (1N4007) 2pcs NPN Transistor (PN2222) 1pcs IC 74HC595 120pcs Resistor 10pcs Female-to-male DuPont Wire.

• Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
• The most economical kit based on Arduino platform to starting programming for those beginners who are interested.
• Lcd1602 module with pin header (not need to be soldered by yourself)
• This is the upgraded starter kits with power supply module, 9V battery with dc
• High quality kite with UNO R3. 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO.

User questions & answers

Question:	which charger i need
Answer:	This kit is easy to learn Arduino and very complete.
Question:	The CD the came with my kit was blank. Can anyone recommend a good tutorial for a complete novice
Answer:	Yes I program mine with A raspberry pi the zero-w to the pi 4 ,8 gig will work !!
Question:	What's the catch? It seems to good to be true
Answer:	It's definitely not too complicated as long as there's the interest, patience, and persistence.
Question:	Is the elegoo uno the same as an arduino uno or is it modified in any way
Answer:	Here is the link to download the latest version: https://www.elegoo.com/tutorial/Elegoo%20The%20Most%20Complete%20Starter%20Kit%20for%20MEGA%20V1.0.2017.10.31.zip

Product features

Compatibility with Official Arduino IDE, Software, Sendsors and Codes

Arduino is an open-source platform used for building electronics projects. Arduino consists of both a physical programmable circuit board (often referred to as a microcontroller) and a piece of software, or IDE (Integrated Development Environment) that runs on your computer, used to write and upload computer code to the physical board.

For the reason of open source, the manufacture of Arduino boards and software distribution by anyone is permitted. Arduino boards are available commercially in preassembled form, or as do-it-yourself (DIY) kits.

Elegoo is one of the manufacturer on the market, whose clone products are compatible with the official Arduinomicrocontroller boards, they can use the official Arduino software, sensors and codes.

Learn Electronics and Programming with ELEGOO

The UNO boards can be used as the brains behind almost any electronics project. UNO can interact with buttons, LEDs, motors, speakers, GPS units, cameras, the internet, and even your smart-phone or your TV! By connecting the UNO board with a personal computer via a USB cable and uploading programs to the board, users can create digital devices and interactive objects that can sense and control objects in the physical and digital world like robots or even honest fortune-telling machines.

For this Elegoo Super Starter Kit, we provide a 24-lesson tutorial, introducing the basic setting of the software IDE, the working principles of the sensors and the simple program to enable the UNO board to control the sensors.

This Kit is suitable for 10-year-old and up. Younger kids should be under supervision and guidance of adults.

74HC595 and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it.

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

4 digit 7 segment display

7 segment displays consist of 7 LEDs, called segments, arranged in the shape of an “8”. Most 7-segment displays actually have 8 segments, with a dot on the right side of the digit that serves as a decimal point. When using 4-digit 7-segment display, the common anode or common cathode pin is used to control which digit is displayed. Even though there is only one digit working, the principle of Persistence of Vision enables you to see all numbers displayed because each the scanning speed is so fast that you hardly notice the intervals. By building the circuit and editing the program, users can make a simple display showing certain numbers, or more complexly, a count-up timer or a elecrical rolling dice.

Stepper Motor

Stepper motors are DC motors that move in discrete steps. They have multiple coils that are organized in groups called "phases". By energizing each phase in sequence, the motor will rotate, one step at a time.

With a computer controlled stepping you can achieve very precise positioning and/or speed control. For this reason, stepper motors are the motor of choice for many precision motion control applications.

the simplest way of interfacing a unipolar stepper motor to UNO board is to use a breakout

for ULN2003A transistor array chip, applying voltage to each of the coils in a specific sequence.

Product description

Microcontroller Microchip ATmega328P

Operating Voltage 5V

USB Standard Type B

Digital I/O Pins 14

PWM Digital I/O Pins 6

Analog Input Pins 6

Flash Memory 32 KB

SRAM 2 KB

EEPROM 1 KB

Clock Speed 16 MHz

• This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs
• Arduino Uno is the most used and documented board in the world
• "Uno" means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0, now evolved to newer releases
• It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button
• Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users

User questions & answers

Question:	Does it come with a usb cable
Answer:	Made in Italy. Correct LED color and screen printing on mine. Don't know why the other reviewers had issues, but as of June 2013 the Arduino is authentic.
Question:	Are the boards sold by Mp3Car Store genuine? Order is fulfilled by Amazon but some sellers are selling fake boards
Answer:	Your best bet is probably gonna be contacting the manufacturer. Unless you can find lengths of key stock shaped the same, and cut down to what is needed... but that is just a guess. Good luck.
Question:	Do these come with the arduino.org label and not arduio.cc? There was a falling out and to support original founders they need to be arduino.cc
Answer:	The box says 16 3/4".
Question:	Is this an original Italy made Arduino?? or china product
Answer:	It comes with a set of 2 Jack stands.

Product description

ELEGOO UNO R3 Project Smart Robot Car Kit V4.0 with UNO R3, Line Tracking Module, IR Remote Control Module etc. Intelligent and Educational Toy Car Robotic Kit for Arduino Learner

• ELEGOO Smart Robot Car: An educational kit based on Arduino platform for beginners (kids) to get hands-on experience about programming, electronics assembling and robotics knowledge. It is an integration solution for robotics learning and made for education for Arduino.
• Complete Package: Contains 24 kinds of module parts including obstacle avoidance, line tracing module, infrared remote control and also you can control it via phone and tablets of Android and iOS system, etc.
• Easy to Assemble: All the module interface has been modified with XH2.54 ports as to make it much easier and convenient to assemble the car and reduce the chances for errors.
• Refined Tutorial in CD: HD rendering instructions on how to assemble the robot car from scratch and all the necessary programs and codes are included. You can also download the same tutorials online
• Upgraded Package Design: More minimalism design and make it a perfect gift for your kids and friends. Note：(Applicable Age : 13+)To use Elegoo starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying.

User questions & answers

Question:	Does this include the Arduino
Answer:	The Elegoo Smart Car uses a motor shield That exposes some I/O pins, but there is huge universe of possible sensors etc that I could not give a definitive answer. I'd check the Elegoo site, find the code for the car, see what pins are declared and figure out what's left. Then look at the sensors you want to add.
Question:	Are there any I/O pins leftover? What kind of additions in terms of sensors, leds, etc. can you add to this kit once it is completed
Answer:	Nano.
Question:	Description says arduino compatible .... is it effectively an uno? a nano? or
Answer:	I have copied V1.1 but I am not running it as yet. I'm not sure of the differences. I glanced at the V1.1 code and it looks cleaner.
Question:	What is the difference between V1.0 and V
Answer:	Yes. It can be powered by a AAA battery [provided].

Product description

This is the most complete kit for starters to learn programming for Arduino projects. It is very fun and easy to use. Kit is 100% compatible with all Arduino modules. The 63 parts are packaged in an attractive, convenient container. Component listing: 5pcs White LED 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs 22pf Ceramic Capacitor 5pcs 104 Ceramic Capacitor 2pcs Photo resistor 1pcs Thermistor 5pcs Diode Rectifier (1N4007) 2pcs Electrolytic Capacitor (10UF 50V) 2pcs Electrolytic Capacitor (100UF 50V) 5pcs NPN Transistor (PN2222) 5pcs NPN Transistor (S8050) 1pcs Tilt Switch 5pcs Button (small) 1pcs 1 digit 7-segment Display 1pcs 4 digit 7-segment Display 1pcs Sound Sensor Module 1pcs LCD1602 Module ( with pin header) 1pcs IC L293D 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs RTC Module 1pcs DHT11 Temperature and Humidity Module 2pcs Potentiometer 1pcs Rotary Encoder Module 1pcs Joystick Module 1pcs Keypad Module 1pcs 5V Relay 1pcs IR Receiver Module 1pcs UNO R3 Controller Board 1pcs Breadboard 1pcs Servo Motor (SG90) 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Prototype Expansion 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs HC-SR501 PIR Motion Sensor 1pcs Ultrasonic Sensor 1pcs GY-521 Module 1pcs 3V Servo Motor 1pcs MAX7219 Module 1pcs Remote 1pcs 9V 1A Power Supply 1pcs 65 Jumper Wire 1pcs Water Lever Sensor 1pcs USB Cable 1pcs 9V Battery with DC 1pcs RC522 RFID Module 10pcs Resistor (10R) 10pcs Resistor (100R) 30pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 20pcs Female-to-male DuPont Wire.

• More than 200 components, this is the most complete starter kit you will find. Great value starter kit with 63 kinds of electronic components.
• Has all the components you need and a free PDF tutorial (more than 30 lessons) to show you how to use them. All code to use the modules is included on the CD.
• All the modules come soldered so they are easy to wire up.
• Includes ELEGOO R3 controller board and USB cable, 100% compatible with Arduino IDE Official R3, Official kit.
• Kit comes packaged in compartmentalized case with a bonus box for small parts like LED’s, IC’s, buttons, diodes, etc.

User questions & answers

Question:	What type of LED lights are in this kit
Answer:	Used to design small circuits and small games. Not intended for lamps. Theese small diodes are not bright enough for lamps
Question:	My 15 yr old is into sound, motors and magnets and wants to take over the world. Is this the best kit out there
Answer:	The arduino has serial communication abilities that can be used to “connect” the devices and/ or let them exchange information. It may also be possible to use Bluetooth modules to let them communicate. Not exactly sure what this question is asking.
Question:	Is soldering required
Answer:	For this kit, the appropriate parameters for the adapter is：output 9V/1A DC Plug 5.5*2.1mm.
Question:	Is the elego uno the same as arduino uno? Is there any difference in the chips and the system
Answer:	Yes, our power supply module output is 5V, the access power is 9V/1A.

Product features

Starter kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo UNO R3 Starter Kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists compatible with Arduino projects, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics1 to take their first steps on electronics journey.

The most complete starter Kit with high quality components and sensors

Quantity and quality are both important here in Elegoo UNO R3 starter kit. The most essential parts in this kit are UNO R3 controller board and expansion board, which is a perfect clone with excellent product finish compatible with Arduino projects.

Besides, we offer other over 60 kinds of components and sensors from small parts like LED diodes, resistors and potentiometer to big parts like LCD1602, RFID module and 830 tie-points breadboard, which meet your demands for your different projects either it is simple or complex.

Sturdy quality is definitely the most important thing to Elegoo even with so many components provided we never compromised on the quality. Instead we keep improving our product quality in our own factory and we produce the products by ourselves under high standards and strict quality control. Pins and wires on some of the parts like LCD16502 and motors have been pre-soldered which is very convenient and saves your time.

74HC595 Shift Register and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it.

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

LCD1602 Display module

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

Lining up the display with the top of the breadboard helps to identify its pins without too much counting, especially if the breadboard has its rows numbered with row 1 as the top row of the board. Do not forget, the long yellow lead that links the slider of the pot to pin 3 of the display. The 'pot' is used to control the contrast of the display.

DC Motors and L293D Transistor

In this project you will learn how to control a small DC motor using an UNO R3 and a L293D transistor, which is a very useful chip. It can actually control two motors independently. We are just using half the chip in this lesson, most of the pins on the right hand side of the chip are for controlling a second motor.

L293D is quadruple high-current half-H drivers and designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is also designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V and drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.

• NEW IMPROVEMENT: Clear prints on the female header connector, more precise and easier to use the wire.
• The ELEGOO UNO R3 BOARD now uses an ATMega16U2 instead of the ATMega8U2 chip. Faster transfer rates and more memory.
• Control using ATMEL ATMEGA328P chip(the same with Arduino UNO R3)
• 100% compatible with the Arduino IDE and RoHS Compliant
• We have always cared about the customer experience and improve the product function details.

User questions & answers

Question:	Ordered two of these and get the same error message: avrdude: ser_open() : can't open device "\\.\COM4": the system cannot find the file specified
Answer:	18 abd 20 awg work
Question:	is the Elegoo compatible with the official Arduino program? (1.8.1 to be exact
Answer:	Yes, I have done that and it works like any ordinary wire. But it’s important to know that you cannot really put the crimped connector ends back onto the wire after removing. (You can but it’s not made to do so)
Question:	Does this use the CH
Answer:	If you are talking about taking off the black dupont connector and sliding the pinned wire into a new dupont connector, then yes, you can. Each connector has the tab that you would expect in a dupont connector. I just did this to 4 wires putting them into a 4 pin connector. If you want to cut the wires shorter then you will need the dupont pins, a wire stripper, and a crimper to crimp the new pins onto the shortened wires. Sorry this answer is long past when it is likely useful to you, but it may help others.
Question:	Is this the same thing as an arduino
Answer:	Most definitely

Product features

The ELEGOO UNO R3 board can be powered via the USB connection.

The ELEGOO UNO R3 board can be powered with an external power supply.

Excellent welding and production quality to make sure satisfied customer experience

Clearly printed pin names on the header connector, more precise and much easier to use the wires.

Product description

ELEGOO Upgraded 37 sensor modules kit is the most useful and highest cost performance sensor kit in market. It is 100% suitable for beginners. And it is also 100% compatible with Raspberry PI and STM32. But if you want to use it with Raspberry PI and STM32, you may find the tutorial by yourself. We only offer the tutorial in our CD. The kit has only sensor modules, if you want to use it, you will need the wires and controller boards. Warning Tip: The input voltage of Elegoo Power Supply Module is 6. 5v - 9v (DC) via 5. 5mm x 2. 1mm plug . Please DO NOT over charge it otherwise it will burn your board and chips. Component listing: 1 x Joystick Module 1 x Relay Module 1 x Rotary Encoder Module 1 x DS-1307 RTC Module 1 x Ultrasonic Sensor Module 1 x HC-SR501 PIR sensor Module 1 x Flame Sensor Module 1 x Linear Hall Module 1 x Metal Touch Module 1 x Digital Temperature Module 1 x Big Sound Module 1 x Small Sound Module 1 x RGB LED Module 1 x SMD RGB Module 1 x Two-tone Color Module 1 x 7 Color Flash Module 1 x Laser Emit Module 1 x Shake Module 1 x IR Receiver Module 1 x IR Emission Module 1 x Tilt Switch Module 1 x Button Module 1 x Active Buzzer Module 1 x Passive Buzzer Module 1 x 18B20 temp Module 1 x Photo-resistor Module 1 x Temperature and Humidity Module 1 x GY-521 Module 1 x Photo-interrupter Module 1 x Tap Module 1 x Membrane Switch Module 1 x Avoidance Module 1 x Tracking Module 1 x Magnetic Spring Module 1 x Water Lever Sensor 1 x Power Supply Module 1 x LCD1602 Module (with pin header)

• Updated from the old version (others): Received great ideas from our customers and adopted in this upgraded kit.
• Removed useless modules like light cup and mercury module, heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS1307 real time clock module etc.
• Upgraded tutorial only for R3, MEGA2560 R3, NANO in CD, listing paper, resistors pack only from Elegoo Team. There are tutorials in the CD that comes with. If you prefer download the tutorials online from the official website
• 100% compatible with Arduino official IDE, Raspberry Pi and STM32.
• Note: To use Elegoo starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying.

User questions & answers

Question:	Is there an available pdf version of the cd-rom
Answer:	This fingerprint scanner needs a micro controller with a firmware that can operate the fingerprints that are scanned and stored in the device. It works with a 3.3 to 6V DC power supply and the digital interface to the micro controller requires 3.3V to 5V. If you run it off a 9V battery, you will need a voltage regulator to power this fingerprint scanner as well as the micro controller.
Question:	ok for 8yr old
Answer:	Yes it is. However, you must buy the cable TTL Serial, this is crucial for establishing the connection with your arduino.
Question:	Are the data/specification sheets for the sensors provided
Answer:	The device works with power from 3.3V to 6V. It should work fine with 3.3V Raspberry Pi signals. Make sure you power the fingerprint module with the same 3.3V DC
Question:	Lesson 26: the tutorial does not give the meanings of the signal pins clk, dt, and sw. also, can anyone make sense of the "principle" text
Answer:	Yes you should be able to use it with rasp pi. Youll need the code which is python based. Here's a link to it. https://github.com/QuickGroup/pyGT511C3

Product features

Sensor kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo 37-in-1 sensor kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists for starters, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics to take their first steps on electronics journey!

Detailed and easy-to-follow tutorial helps you learn electronics without problems

An enjoyable and educational experience is definitely the priority option to learn electronics. Our detailed tutorial with 31 lessons ranges from simple projects like how to monitor temperature and humidity with DHT11 sensor to complex projects like how to achieve the goal of timing control switch using a 1 channel relay module. Easy to understand and easy to follow.

Schematics and wiring diagrams are also presented in out tutorial, which helps you better understand why those sensors are connected in that way. Besides that we also have the IDE for programming codes ready in the CD and our website. If you are a professional and prefer a little DIY you can also edit the codes as you wished and make it more personalized.

DHT11 Temperature and Humidity sensor

DHT11 digital temperature and humidity sensor is a composite sensor which contains a calibrated digital signal output of the temperature and humidity. The dedicated digital modules collection technology and the temperature and humidity sensing technology are applied to ensure that the product has high reliability and excellent long-term stability. The sensor includes a resistive sense of wet components and a NTC temperature measurement devices, and connects with a high-performance 8-bit microcontroller.

HC-SR501 PIR Motion Sensor

PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or businesses. PIRs are basically made of a pyroelectric sensor, which can detect levels of infrared radiation. Everything emits some low level radiation, and the hotter something is, the more radiation is emitted.

GY-521 Triaxial acceleration triaxial gyroscope sensor

GY-521 six-axis sensor usually consists of two which are accelerometer and gyroscope. The GY-521 is a 6 DOF (Degrees of Freedom) or a six axis IMU sensor, which means that it gives six values as output. Three values from the accelerometer and three from the gyroscope. It is also a sensor based on MEMS (Micro Electro Mechanical Systems) technology. Both the accelerometer and the gyroscope is embedded inside a single chip. This chip uses I2C (Inter Integrated Circuit) protocol for communication.

Product description

Tutorials and Code:

This kit contains basic (Tutorial.pdf) and advanced (Processing.pdf) projects tutorials.

You can download the tutorials and code before purchasing:



https://git.io/JJJX6



Contents of Tutorial.pdf:

Preface

Chapter 1 LED Blink

 Project 1.1 Control LED by Manual Button

 Project 1.2 Control LED by Control Board

Chapter 2 Two LEDs Blink

 Project 2.1 Two LEDs Blink

  ...

(Download tutorial for details)

  ...

Chapter 24 Ultrasonic Ranging

 Project 24.1 Ultrasonic Ranging

Chapter 25 Solder Circuit Board

 Project 25.1 Solder a Buzzer

 Project 25.2 Solder a Flowing Water Light

Other Components

What's next?

Appendix



Contents of Processing.pdf:

Preface

 Processing Software

 First Use

Chapter 1 Voltmeter

 Project 1.1 Voltmeter

 Project 1.2 Voltmeter Dual Channel

Chapter 2 Oscilloscope

 Project 2.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

Chapter 4 Snake Game

 Project 4.1 Snake Game

 Project 4.2 Snake Game 3D

Chapter 5 Pong Game

 Project 5.1 Pong Game

 Project 5.2 Pong Game 3D

What's next?

• 273-page detailed tutorials (including basic electronics and programming knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 217 common items -> All parts needed to complete the projects in the tutorial. No soldering required.
• 51 interesting projects -> Each project has circuit diagram and tested code with detailed explanation.
• Extra advanced projects -> Make virtual instruments (voltmeter, oscilloscope) and game consoles.
• Get support -> Our technical service team is always ready to answer your questions.

User questions & answers

Question:	Can i have the listed specs gor the control board? (i.e. allowable input voltage, ram, flash, clock, etc
Answer:	Yes the male to female wires work for working with the raspberry pi’s GPIO pins to a breadboard. While the male to male work well for work on the breadboard itself. We’ve used these with our Raspberry Pi

• ★32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out
• ★5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects
• ★4 mounting holes at the corners of the board are very convenient for installing them together.
• ★Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects
• ★High quality of durable glass fiber –FR4 material with 1.6mm thickness makes a very solid and sturdy prototype circuit board

User questions & answers

Question:	what is the max volts/watts/current that can be passed through the board
Answer:	As long as your bed frame has holes in it this headboard should work. It has several different holes, so you can customize how high or low the padded back is. I have mine attached to a basic Hollywood frame. It does NOT come with the screws to attach it though. You will have to supply those.
Question:	Can you cut the boards apart? That is, one board cut into 3 pieces for three independent projects
Answer:	I attached the headboard directly to the wall. Looks great!
Question:	Will M2 size standoffs fit in these mounting holes? They measure very close to 2mm
Answer:	No. For mine, I bought 4 sets of bolt, nut and washer from Home depot. Carriage bolt 5/6 x 1-1/2. Code AHA. Nut: ABC, washer: ABB.
Question:	Are electrical connections made between holes in a pattern similar to those on a solderless breadboard? Or is each hole electrically isolated
Answer:	I have no idea, but we have had this bed frame for 2 months, it is in my daughters room , she weighs 30lbs, and I or my husband sleep in the bed with her so 230lbs it holds. Both my kids jump on it all the time and it has held up great!

Product features

Elegoo Double Sided Prototype Board

Product Specification:

Selection of Multi-Sized Proto Boards

32 pieces double-sided prototype boards of 5 different size to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects.

Solid Quality and Great Value

High quality of durable glass fiber -FR4 material with 1.6mm thickness makes a very solid and sturdy prototype circuit board.

Pre-tinned Holes for Handy Soldering

Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects.

Compact and Elegant Packaging

ELEGOO double-sided perfboard comes with a elegant package which contains all the 32 pcs boards in a plastic tray for easy storage.

Package List

• 6pcs 4X6CM double-sided PCB board with 280 holes
• 10pcs 3X7CM double-sided PCB board with 240 holes
• 7pcs 5X7CM double-sided PCB board with 432 holes
• 7pcs 2 X 8CM double-sided PCB board with 168 holes
• 2pcs 7 X 9CM double-sided PCB board with 806 holes

• Perfect choice for beginners to learn, electronics and program.
• This kit with tutorial user manual containing more than 20 lessons,code,Libraries, datasheets, and so on.
• 100% Compatible with program.
• Inlcude type motors and LCDs with servo motor, stepper motor and DC Motor; LCD 1602, LCD 4-bit 7-segment Display etc.
• LCD 1602 module with pin header (not need to be soldered by yourself)

User questions & answers

Question:	What is the name of the Arduino in this product and what is its name in the Arduino program
Answer:	They refuse to List them. And it doesnt even show them on the Box either
Question:	Does the board have wifi or bluetooth? If not is there a kit in the same price range that does have bluetooth or wifi
Answer:	No
Question:	Is this 100% compatible with arduino hardware and software
Answer:	No
Question:	Which charger do I need
Answer:	Butane, I have to click it a few times before it will light.

Product features

Super Starter Kit for R3 Project

LAFVIN Super Start Kit not only contains r3 control board,but alsoincludes LED diodes,resistors,LCD1602,RFID module,Sound moduleover than 50 kinds of components and sensors. Which meet your de-mands for your different projects either it is simple or complex.

100% Compatibility with Official Software

The R3 is a microcontroller board based on the ATmega328.

It has 14 digital input/output pins (of which 6 can be used as PWM

outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection,

a power jack, an ICSP header, and a reset button.

It contains everything needed to support the microcontroller; simply

connect it to a computer with a USB cable or power it with a AC-to-DC

adapter or battery to get started.

Detail Tutorial help you to learn electronics and programming

Don’t be nervous if you are a beginner.Our tutorial contains detailed

wiring diagrams,codes,libraries.Just follow our tutorial and step by

step you will come to realize that learning electronics is interesting.

There is connection diagram and code for each project, making it

easy for you to learn.

It’s the best choice and nice gift for your friends,family and kids to

learning electronics and programming.

1602 LCD Display Module

This is great LCD display compatible with arduino.

With limited pin resources, your project will quickly run out of resources using normal LCDs. With this I2C interface LCD module, you only need 2 lines (I2C)to display the information.

If you already have I2C devices in your project, this LCD module actually cost no more resources at all. The address can be set 0x2.

74HC595 and Segment Display

Common anode 7-segment display Each segment of the display consists of an LED. So when you use it, you also need use a current-limiting resistor.

Otherwise,LED will be burnt out. In this experiment,we use a common cathode display. As we mentioned above, for common cathode display, connect the common cathode (COM) to GND. When the anode level of a certain segment is high, the segment is on; when the anode level of a certain segment is low, the segment is off.

LED and 830-hole Breadboard

LEDs are included in many lighting industries, the industrial community is depending more and more on LEDs.

In this lesson, a simple yet interesting experiment will be conducted, using LEDs to create flowing LED lights. As the name implies, these flowing lights are made up of six LEDs in a row which successively light up and dim one after another like flowing water.

Product description

Miuzei Basic Starter Kit for learning Arduino, we provide every detailed lessons for helping beginners to do the projects, we have tested all lessons before sold the products, we will be appreciated if there any arduino lovers give any suggestions or have a communication with us. Every component is strictly tested before delivery, feel free to buy it!



Package Inclued:



1x R3 Board

1x USB Cable

1x accrylic holder

1x 830 tie-points Breadboard

1x LCD1602 Module (with Pin header)

1x 4-digit 7-segment Display

1x 7-Segment Display

1x Servo Motor(SG90)

1x ULN2003 Stepper Motor Driver Board

1x Stepper Motor

1x Power Supply Module

1x 9V Battery Holder

1x Ultrasonic distance sensor

1x Water Lever Sensor

1x Joystick Module

1x IR Receiver Module

1x IR Remote Control

1x DHT - 11( Temperature and Humidity sensor)

1x Thermistor

1x Active Buzzer

1x Passive Buzzer

2x Diode Rectifier(1N4007)

2x 2N2222 Transistors

2x Potentiometer (10K)

2x Photoresistor

1x IC 74HC595

10X 10 pcs Resistor( 1M, 10R, 100R, 220R, 330R, 100K, 1K, 2K, 5.1K,10K, )

5x LEDs (White, Yellow, Blue, Green, Red,RGB)

1x 20 Pin Male to Female Jumper Wires

1x 65 pcs Jumper Wire

1x Tilt Switch

5x Buttons (Small)

• Starter Kit for Arduino contains 28 free lessons with detailed tutorial , tested & annotated code to help the beginners or engineers building Arduino project.
• All modules come with soldered pin header or wire, compatible with Arduino R3 and all computer operating systems
• Especially with acrylic holder to keep LCD1602 display, R3 board and breadboard together stably, easy to build a small experimental platform.
• Over 160 components -- Complete Kit with R3 controller board, LCD display, Ultrasonic sensor ,Power Supply module and more commonly components like Jumper Wires，Led kits, Resistor, servo motor.
• Portable to Carry-- Come with a sturdy box with dividers to keep the small stuff like LED, IC, buttons, diodes in the individual case.

User questions & answers

Question:	Is the board included an actual arduino uno rev3? in the photos the board seems to be lacking the arduino branding
Answer:	this fits 30 oz
Question:	What is the dimension of the board holder
Answer:	I only have the 20 Oz. and it fits fine, no idea about the 30 oz.
Question:	this pack is can be shiped to morocco
Answer:	I suspect it will. I measured my Yeti cups and the inside LIP (rim) diameter 3 1/2 inches.
Question:	How can i get the content of the cd, since i can't find a device to read that cd
Answer:	It only lists 20 Oz tumblers you would have to check the dimensions of the wine and tumbler to Know for sure