10 best video card cooler

• Size:90mm(we can state 85mm is right also)
• Mounting holes pitch:28MM*28MM*28MM*28MM
• Power plug:4pin interface
• Compatible with following model cards: For ASUS GTX1080TI/980Ti/1070/1080/1070Ti R9 390X/390 RX480/580 R9 FURY Cards Cooling

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• UNMATCHED COOLING PERFORMANCE: With a cooling capacity of 300 Watts, the Accelero Xtreme IV offers an unmatched cooling performance. The three 92 mm PWM fans and the pre-applied MX-4 thermal compound ensure efficient cooling, even under overclocking
• BACKSIDE COOLER FOR HIGHEST EFFICIENCY: ARCTIC has developed and patented a back side cooler for unparalleled VRM and RAM cooling performance. It offers efficient cooling for RAM and voltage regulators and thus does not just allow higher clock rates but mainly increases the graphics card's service life
• INSTALLATION WITHOUT THERMAL GLUE: Up to now the meticulous work of attaching different heatsinks with thermal glue was necessary. Thanks to the innovative back side plate this is a thing of the past. Without any thermal glue the graphics card can be returned to its original condition any time without leaving marks or residues
• VIRTUALLY SILENT: Its low noise impeller and patented fan holder ensures the fan is ultra-quiet even under full load. Thanks to the PWM control, the fan speed adjusts according to the GPU temperature and thus the noise level remains at an absolute minimum. Accelero Xtreme IV is compatible only with the graphics card using a standard size PCB with a width of 98mm. Noise Level: 0.4 Sone at 2,000 RPM
• MULTI-COMPATIBILITY: Accelero Xtreme IV features a versatile, problem free mounting system that allows this cooler to accommodate a wide range of graphics cards

User questions & answers

Question:	Will this fit on an gigabyte r9 290 (gv-r929oc-4gd
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Standard tripod
Question:	Will the cooler fit a Asus 980ti strix
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } sure
Question:	will this fit a zotac gtx
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Yes, you can change the resolution to 720p in the settings
Question:	Can it cool up to 250w gpus, or does it itself use up to 250w? if so, i'll need to upscale my psu
Answer:	If you don't want to use the included remote control, you can attach a USB mouse to it instead. If all you are doing is using the cloud album photos, than you only need to use the remote/mouse for initial setup of your WiFi and registration. After that, you can manage the photos/slideshow from your smart phone using the APP or your computer and the frame doesn't need to be touched unless you need to do something other than the cloud album.

Product features

Backside Cooler for Highest Efficiency

ARCTIC has developed and patented a back side cooler for unparalleled VRM and RAM cooling performance. It offers efficient cooling for RAM and voltage regulators and thus does not just allow higher clock rates but mainly increases the graphics card's service life.

Installation Without Thermal Glue

Up to now the meticulous work of attaching different heatsinks with thermal glue was necessary. Thanks to the innovative back side plate this is a thing of the past. Without any thermal glue the graphics card can be returned to its original condition any time without leaving marks or residues.

Virtually Silent

Its low noise impeller and patented fan holder ensures the fan is ultra-quiet even under full load. Thanks to the PWM control, the fan speed adjusts according to the GPU temperature and thus the noise level remains at an absolute minimum.

Multi-Compatibility

Accelero Xtreme IV features a versatile, problem free mounting system that allows this cooler to accommodate a wide range of graphics cards.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• COOLING PERFORMANCE: 5 premium quality copper heatpipes and pre-applied MX-4 thermal compound conduct heat from the GPU efficiently to the 84-fin aluminum heatsink, meanwhile, the three 92mm PWM fans create massive airflow to bring unparallelled cooling performance, even when higher performance is required under overclocking
• LOW NOISE: The Accelero Xtreme III cools very efficiently thanks to three ultra-quiet PWM fans, thanks to the PWM control, the speed of all fans will adjust according to the temperature of the GPU and thus the noise level remains minimal as always
• ENHANCED RAM AND VR COOLING: The Accelero Xtreme III comes with 31 RAM and VRMheatsinks to keep your RAM and VR at optimal temperatures. The thermal adhesive facilitates heat dissipation of RAMs and VRMs and offers a strong and lasting bond
• MULTI-COMPATIBILITY: It features a versatile and interchangeable mounting system with 31 RAM and VRM coolers in different sizes and shapes to accommodate a wide range of graphics cards. Its compatibility with CrossFire and SLI is perfect for multi-VGA setups
• NEW FAN CONTROLLER: An improved fan controller and the use of additional filters guarantee a smooth operation with both NVIDIA and AMD graphics cards. Through software, the temperature-fan speed curve can be adjusted. No matter whether you are a hardcore-gamer or a silent enthusiast, you get the temperature and noise level exactly where you want it to be
• Massive 300W of cooling power with triple 92mm PWM fans & efficient heatsink design
• Versatile interchangeable mounting design supports a wide variety of VGAs from both nVidia& AMD

User questions & answers

Question:	Has anyone used the accelero xtreme iii with a sapphire r9 290x tri-x oc edition card? i considered the xtreme iv, but my cpu cooler is in the way
Answer:	in the fits list it does say it will....
Question:	Compatible with the new Radeon 5700 and/or XT
Answer:	Hi. The Cooler will fit it, just be carefull installing it. :)
Question:	Whats the difference between the iv and the iv 280 (x
Answer:	250W of GPU TDP. It's just two fans, not an industrial freezer.
Question:	Will this cooler fit on an msi armor 2x rx
Answer:	"Hello, our camera power support recording about 90 minutes of video, and has the function of recording while charging, without worrying about power exhaustion. (The default format of all SD cards on the market is FAT32, with a single file supporting up to 4G files.) If you record a single video over 4G, the camera will automatically save the video and turn on the next video for you. Don't worry, it's just a normal phenomenon. I hope this will help you."

Product features

Superior Cooling Perfomance

5 premium quality copper heatpipes and the MX-4 thermal compound (pre-applied) conduct heat from the GPU efficiently to the 84-fin aluminum heatsink, meanwhile, the three 92 mm PWM fans create massive airflow to bring unparallelled cooling performance, even when higher performance is required under overclocking.

Low Noise

The Accelero Xtreme III cools very efficiently thanks to three ultra-quiet PWM fans. Overclockers has shown us the Accelero Xtreme III is 32 dBA quieter compared to the stock cooler.Thanks to the PWM control, the speed of all fans will adjust according to the temperature of the GPU and thus the noise level remains minimal as always.

Enhanced RAM and VRM Cooling

The Accelero Xtreme III comes with 31 RAM and VRM heatsinks to keep your RAM and VRM at optimal temperatures. The thermal adhesive facilitates heat dissipation of RAMs and VRMs and offers a strong and lasting bond.

Multi-compatibility

It features a versatile and interchangeable mounting system with 31 RAM and VRM coolers in different sizes and shapes to accommodate a wide range of graphics cards. Its compatibility with CrossFire and SLI is perfect for multi-VGA setups.

• Parallel or Vertical Cooling down Graphic card directly with three high air flow RGB Fans; Sturdy Metal with aluminum brush with PCI mount design for easy installation, fit PCI-E x1/x16
• 80 mm Dual Ring RGB Fans x3 pcs: 12 independent RGB LEDs in every fan, split between two separate light loops, Rainbow and static colors.
• Easy to use: the fan allows you to control the fan speed and LED mode by remote control, or connect to the motherboard, control the fan speed by PWM and light by 5V 3pin ASUS Aura Sync, MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion 2.0 (Please note: It does not support 12V 4 pin RGB header from motherboard).
• PWM fan speed control: allows for dynamic speed adjustment, minimizing noise or maximizing airflow. Product dimension L 12.48 inches x W 5.12 inches x H 1.97 inches
• RF Remote control : allow you to adjust Fan Speed and cycle through lighting effects / brightness / LED speed without opening the case.

User questions & answers

Question:	Is that a 15 pin sata connector? and is it necessary to plug it in? i'm guessing the fan can connect to either the 3/4 pin connectors, but rgb
Answer:	I found it didn't work well
Question:	What is the point behind this? my rtx 3070 has 3 fans, why would i want/need this
Answer:	The IV works for all 280's manufactured after February 2013. The 280x works with all 280's.
Question:	Bought this and realized my motherboard doesn’t have the 5v 3 pin connector will it still work without it
Answer:	Yes.
Question:	Would this help with a radeon vii
Answer:	yes i have r9 290after a year works fine

Product features

PWM Control

Dynamic speed adjustment, minimizing noise or maximizing airflow.

Vertical Mode

Cooling down Graphic card directly

Parallel Mode

Cooling down Graphic card directly

(Fit PCIe x1/x16)

RGB Lighting Effect

Support ASUS Aura Sync, MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion 2.0

Color Mode

12 independent RGB LEDs in every fan, split between two separate light loops, Rainbow and static colors.

Support 5V 3pin addressable Header

Please note: It does not support 12V 4 pin RGB header.

Product description

Dimensions: 134x20x270mm Connector: 4Pin Rated Voltage: DC 12V Rated Current: 0.12 Amp Rated Speed: 1500 RPM ±10% Air flow: 17.52 CFM Noise: 18 dBA Material:Aluminum

• 1.There are no instructions so here’s what to do: 1. Plug it into an open PCI slot 2. Plug the SATA cable in for power 3. If you want to use the LED functions attach the adapter and make sure that the arrows are pointing at each other (IMPORTANT) then plug the 2nd SATA cable in for power
• 2. The sense of the development of this products is to provide a straight-blown air supplement for those video card which don't have sufficient heat dissipation or inappropriate cooling channels by inappropriate case structure which will cause high video card temperature or high noise level
• 3. With VF-1, it has been tested that the temperature of the video card will drop around 5 degrees celsius (different figures will be achieved from different hardware)
• 4. There is RGB light effect on the top of VF-1, It can not only supplement the insufficient light effect of most of the video card but also provide simple and elegant light effect embellishment to the video card area
• 5. Dual mode RGB color: Mode A: If your motherboard supports AURA RGB color change, you can connect the 4 pin plug directly to the motherboard to achieve 16 million color and breathing light mode changes. Mode B: If your motherboard does not support RGB color change, you can control the color by a combination of lighting controllers. A total of seven colors are variable.

User questions & answers

Question:	what if there is no light interface on motherboard
Answer:	it work great but so noisy
Question:	What interface is used for the light and power supply of VGA cooler
Answer:	I cannot say specifically for your graphics card if it would be a good replacement but the directions do suggest to use it as a replacement for the fans on a graphics card by putting the fans against the heatsink
Question:	What are the size of the fans? Also are they standard computer fans inside the frame
Answer:	I think the listing said the max rpm's was about 3000
Question:	How many watts of power does it use
Answer:	This hub has a 4 pin male molex connecter, so you will need a 4 pin female molex connecter to power it from your power supply. no cables are included.

• ❤UNIVERSAL GPU COOLER: 2 x 92mm fans designed for most universal graphic card video card VGA cooling,just please check the size to make sure your pc has enough space.
• ❤5V 7V 12V VOLTAGE: 1x Power D-type interface cable ,four interface with 5V 7V 12V voltage sticker,choose different voltage to get airflow: 38CFM ,56CFM ,95CFM and different noise level.
• ❤FAN SPLITTER CABLE:1x 4Pin fan splitter cable,you can combine 3x92mm fans into one interface to be connected with voltage cable.ignore it,Each fan can be worked independently,easy operation and replacement.
• ❤PACKAGE INCLUDED: 2x92mm fans(PCI bracket screwed), 1x multi-voltage cable ,1x fan splitter cable.
• ❤100% 90 DAY MONEY BACK : If you are not satisfied for any reason, simply return your product for a full refund, no questions asked. You have nothing to lose.

User questions & answers

Question:	does it fit a p104-100 asus
Answer:	Yes. There is a controller built in which you can access through a PCI slot
Question:	would this work to replace the blower fan on a rtx
Answer:	In my Dell XPS-8300, it takes TWO slots (mounting + needed space for airflow) so this product will not work. Even without considering airflow, it will NOT fit in one slot.
Question:	What is the max rpm of the fans at 12v
Answer:	No, the build is too heavy and it will not hold at least for mine rig. You better off geting the another one with a pcie dummy holder/slot.

Product features

UNIVERSAL GPU COOLER(CHECK SIZE CAREFULLY)

• It is universal GPU Cooler,can fit for most of the market graphic cards.
• Size :7.28 * 4.92*1.18inch.
• Please check the size and make sure it can fit your pc perfectly.

USE FANS TO COOL HEAT SINK DIRECTLY

• Take GPU cover away if it has.
• Keep the GPU heatsink.
• Use Fans to Cool Heat sink directly for Better Cooling.

99% GRAPHIC CARD COOLER COMPATIBLE

• The temp of PC running at full load after installed our fans is around 35℃-56℃
• The temp of PC normal operation after installed our fans is around 24℃-27℃
• The temp of PC normal operation but with other brand cooling fans is around 44℃-90℃

4 IN 1 Voltage Cable

• You can get different airflow and noise level by selecting voltage connector.

Extra 4Pin Fan Splitter Cable

• With this cable,you can combine 2 fans to 1 interface to save your pc interface.

Extra Tools Accessories

• You can install or mount the cooler by these tools easily.

INSTALLATION INSTRUCTION

• Take the GPU cover away but keep the heat sink.

Product description

Specification:

Model: CF1010U12S

Voltage: DC 12V

Current: 0.45AMP

Fan Dimension (L x W x H): approx. 95mm * 95mm * 12mm

Mounting holes distance: approx. 39mm* 39mm * 39mm (Center to Center)

Power Connector: 4-Pin Header



Applications:

XFX RX 580 4G

RX 580 8G

RX 590 8G

• Model: CF1010U12S
• Current: 0.45AMP
• Voltage: DC 12V
• Power Connector: 4-Pin Header
• Fan Dimension (L x W x H): approx. 95mm * 95mm * 12mm

User questions & answers

Question:	Do these work on a gtx 1050ti
Answer:	I had a case that had side ventilation and I used this in a vertical orientation to draw fresh air from the side of the case directly to the 3 GPU fans of my horizontally mounted GPU. Normally a GPU cycles air that is already warm inside the case through it's cooling solution. If this can bring some fresh air near the GPU, a temperature reduction may result.
Question:	Are the fans replaceable
Answer:	Yes, you can control the light by remote, it comes with the fan, any question please contact [email protected], thanks for your order.
Question:	how well does this work with blower style cards
Answer:	It didn’t help my 2080ti
Question:	can I plug it directly to the motherboard fan header 3 pin
Answer:	I would not recommend changing from the stock cooler on that card, as AMD vrm's are known to produce more heat than the extra heatsinks included with this kit can take. I don't think this cooler would do much better (if any) than your stock one anyway.

Product features

PCI Fixed Bracket

Graphics partner is fixed by PCI bracket.

Installed in chassis PCI location.

Keep the fan away from the slots and components of the motherboard

Personalized Fan Interface

2 fans combined into one interface, So, you only need to access one interface to run all the fans.

Can be connected to the motherboard's 3-pin or 4-pin interface, working at full speed.

But it is recommended to use one point four voltage line we sent together.

Choose the voltage that suits your needs.

Because different voltages with different airflow, speed, and noise.

Power D-type Interface

• Four interfaces, three voltages.
• Different voltages with different airflow, speed, and noise.
• you can select the appropriate voltage interface to start the fan.
• 5V interface: The fan will work at about 40% speed，small airflow, very quiet.
• 7V interface: The fan will work at about 60% speed，moderate airflow, relatively quiet.
• 12V interface: The fan will work at about 100% speed, Big airflow.

Metal Fan Grill

Protect Fan Blades.

Prevent wires or foreign objects touching the blades,

Causing interruption or obstruction.

How to install it?

Step One: Remove the graphics card's case, exposed graphics card heatsink.

(you can pass this step if the graphics card doesn't have a case)

Step Two

Install your graphics partner at the PCI location below the graphics card, Screw it tightly.

Step Three

Find an empty power D-type interface at the line where the power supply is divided, connected to the distribution D-type one-in-four line.

Step Four

Use one of the four-wire voltage interfaces connected to the fan's interface. it will work.

Product description

T129215SU Graphics Card Fans VGA Cooler For Sapphire RX470D 4G D5 RX570 RX 570 ITX R9 370 1024SP 4G/2G V2 OC Video Cards Cooling (Long Cable Single Cooler Fan)

• Size:90mm(we can state 85mm is right also)
• Model:T129215SU
• Compatible with following model cards:For Sapphire RX470D 4G D5 RX570 RX 570 ITX R9 370 1024SP 4G/2G V2 OC Video Cards Cooling

• 【Multi Compatibility】The GPU Water Cooler is compatible with RTX 20XX Series/GTX 10XX Series /900 Series/AMD RX 200/300 Series/GTX 1600 Series
• 【Better Heat Dissipation】The VGA cooler comes with a 240mm AIO GPU water cooler and a 2-in-1 240mm cooling fan to ensure excellent heat transfer from GPU, the built-in 92mm fan is equipped to cool down your MOS and VRAM
• 【Why Need VGA Cooler】The VGA liquid cooler can offer efficient cooling for your graphic card to ensure higher clock rates to get a long lifespan of the graphics card
• 【Quiet Operation】The low noise impeller and PWM fan ensure ultra-quiet even under full load. The fan speed can be adjustable according to the GPU temperature via the PWM function.
• 【Easy Installation】It comes with mounting kits and manul for mainstream gaming VGA card

User questions & answers

Question:	will this fit an MSI 2080ti trio
Answer:	I have it on my MSI trio 2080. Fits perfectly
Question:	will this fit the xfx 5700 xt thicc ii
Answer:	I tried it with AMD vega 56 and it did not fit, though the product is advertised to work with vega 56/64 cards. Once you teardown your graphics card, you might not be able to put it back exactly the way it was.
Question:	Does my asus gtx1650 super fit
Answer:	It won’t fit this card because mos is on left !
Question:	Does this fit a 1660 super I have 3 fans on mine
Answer:	Yes it will no problem.

Product features

Graphic Card Water Cooler

The ultimate gaming VGA cards cooling with 240mm AIO water cooler and addressable RGB lighting system

240mm Cooling Fan

The 240mm fan with addressable RGB light is specially designed in a 2-in-1 shape for better cooling performance and hassle-free cable management.

Two-way RGB Control

The Addressable RGB lighting can sync with the motherboard, a remote control is included for non-RGB motherboards for customizing colors.

Product description

Model: FDC10H12S9-C

Voltage: DC 12V

Current: 0.45AMP

Fan Dimension (L x W x H): approx. 95mm x 95x 12mm

Screw holes distance: approx. 39mm x 39mm x 39mm (Center to Center)

Power Connector: 4-Pin Header

Work for XFX RX 590 GTS Edition

for XFX RX 590 Fathboy 8GB

• Diameter: 95mm, Screw holes distance: 39mm x 39mm x 39mm (Center to Center) * Power Connector: 4-Pin Header
• Work For XFX RX 590 GTS Edition
• Work For XFX RX 590 Fathboy 8GB
• The fan not come with any screws , please keep your screws from your Graphic Card

User questions & answers

Question:	Have you the fan case for fdc10u12s9-c
Answer:	Not at all on my 1080Ti Founders Edition...save your money for a better solution. I got the Arctic Acelero 3 which dropped my temps 20-25 c
Question:	Have you the fans case, for xfx rx
Answer:	Yes
Question:	do they make the card more quiet
Answer:	Hi, the product needs to connect the PSU by SATA cable, if you want to control the light by the MB, please makse sure the RGB cable must connect to the 5V3pin header on the MB, as for details please check it below. http://anidees.com/product/rgb-vga-cooler/