12 best liquid cooler for ryzen 7

Product description

The LC240E RGB incorporates Cooler Master's Dual Chamber Pump, 120 millimeter Fan, and RGB Controller to control the lighting effects. With its matt black styling, braided cabling and RGB lighting effects, the LC240E RGB is a Cooler Master original design and enables a colorful and great performing entry into liquid cooling. Reliability, performance and quiet operation are ensured by its unique Dual Chamber Pump and twin 120mm fan design. Whether you're building new or just upgrading, it's easy to install on the latest Intel or AMD systems and 240mm radiator fits many performance PC chassis.

• Liquid cooling system: The Cooler Master LC240E delivers efficient cooing with our dual pump 120 millimeter fans; It keeps your system running effectively, even in the high load times; Air flow: 66.7 CFM; Noise level: 31.5 decibels
• Dual chamber: Our low profile dual chamber pump delivers sizable performance leaps over last gen technology
• 120 millimeter fans: Silent cooling at an efficient rate
• Sleeved tubing: Reinforced FEP tubing to keeps the tube kink free and the liquid flowing to your CPU
• RGB controller: Allows you customize colors and light effects
• CPU socket support: Intel: LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

User questions & answers

Question:	Would this work with a z370 sli slim motherbaord
Answer:	Yes, the z370 motherboard is a socket 115x so this CPU cooler will fit as long as there is a little space around the CPU socket (most should have more than enough space)
Question:	Does the cooler work on a mobo intrl lg1151 socket
Answer:	Hello Nicolas, Yes, this liquid cooler AIO should mount to an LGA 1151 socket without any issues. CM-PNguyen
Question:	Is the cooler's tdp actually 130w? the listed figure is very low compared to similar cooler master aios
Answer:	And now it’s 2020, still 130w tdp. 240 liquid cooling should be good for most 200-250 tdp chips, just swap the fan for an arctic or Noctua.
Question:	Hi, I have read alot of reviews saying the therr is a design flaw, Can the manufacturer guarantee that the plsstic tabs will not brake
Answer:	I owned three of these and all three had problems. The design flaw is the mounting bracket and the way it connects to the water pump. Under pressure the tabs will break and you must be vert careful when installing it. I have two break on installation and another pop after about 4 months of usage. I have built PC's for over 25 years, so I understand how to properly apply pressure when installing CPU coolers. I would wait until cooler master fixes this issue. Hopefully the next revision will have a better mounting system.

Product features

MasterLiquid LC240E RGB

MLLC240E RGB is a Cooler Master's original design, with its matte-black styling, braided cabling and RGB lighting effects for a colorful entry liquid cooling. Cool in any color as the RGB options extend to both fan and water block, all with six lighting effects from which to choose. Reliability, performance, and quiet operation are ensured by its unique Dual Chamber Pump and Dual 120mm MasterFan. Whether you're building new or upgrading, it's easy to install on the latest Intel or AMD system.

Dual Dissipation Pump

Our low-profile dual chamber pump delivers performance leaps over single-chamber pump designs.

Double FEP Tubing

FEP makes for durable yet flexible tubing, while the mesh outer sleeve creates a premium look.

Low-Resistance 240 mm Raditator

Beautifully designed to maximize cooling surface area.

Library Quiet

Built sturdy, keeping vibrations and rattle to nearly inaudible levels.

• 【Better Heat Dissipation】The CPU water cooler equipped with 240mm radiator and 2x120mm PWM fans to make sure excellent heat transfer from CPU.
• 【RGB Lighting】RGB lighting on the pump and fans are adjustable to match your PC build.
• 【PWM Fans】Dual 120mm RGB PWM fans deliver a blast of color and improved airflow for extreme CPU cooling performance. Max. Air Flow: 62CFM; Noise Level: 18～26.4dB(A)
• 【Two-way RGB Control】The RGB lighting can sync with the motherboard, a wired RGB controller is included for non-RGB motherboards for customizing colors.
• 【Compatibility】Intel LGA2066/2011/1366/1151/1150/1155/1156/1200 & AMD AM4

User questions & answers

Question:	How long are the hoses on the 360? Long enough to front mount with hoses down
Answer:	They should be long enough. Mine is mounted front with hoses down, and I have a Full Tower case.
Question:	would this need maintenance in the future? Im not sure how water coolers work
Answer:	Yes it will but with the way it’s designed it’s a little difficult to change the liquid out especially if your new to water cooling. I would recommend to check temperatures if it’s higher than than 50-60 Celsius under load and 70-80 with load then would either replace the thermal compound with a new layer if temps don’t change then would recommend to replace the whole thing
Question:	Does this work with intel i7 10th gen (lga
Answer:	Yes, it can work with the LGA 1200 socket.
Question:	What's the RPM on the fans
Answer:	Fan Speed: 700～1500±10%RPM

Product features

ZOOMFLOW 240X SNOW

The ZOOMFLOW 240X SNOW is an all-in-one RGB liquid CPU cooler with a 240mm radiator built for cpu cooling.

RGB Lighting

The special design with an Addressable RGB LED pump head and two RGB cooling fans are adjustable to match your PC build.

Sync with Motherboard

Color option can be controlled through the RGB controller in the package for motherboards without ARGB header .

Dual Addressable 120mm RGB Fans

The dual 120mm PWM fans deliver improved airflow and produce 18～26.4dB(A) of noise when using. Vibrant RGB fans produce vivid lighting effects to match your build.

240mm Radiator + Flexible Tubing

It come with 240mm radiator to ensure excellent heat dissipation. The premium sleeved tubing makes it durable yet flexible to give it a premium look.

Better Heat Transfer

With the bigger pushing motor, the pump cam push more water flow as to take the heat away more quickly.

Featuring the ARGB lighting inside to match your PC build.

Product description

The EVGA CLC 240 liquid CPU cooler has arrived! This new liquid cooler from EVGA gives you incredible performance, low noise, and robust software controls. The full copper water block pulls the heat from your CPU to the radiator, where newly designed fans, Featuring Teflon Nano bearings, effortlessly disperse the heat. the CLC 240 offers premium sleeved tubing and fully controlled RGB LED to provide a sleek look.

• Compatible with Intel LGA2066/2011/2011-v3/1200/1150/1151/1155/1156/1366 and AMD AM2/AM3/AM4/FM1/FM2/TR4 and upcoming variants
• 240mm Dual Fan radiator
• RGB LED's, can be synced to other EVGA RGB components
• Unique EVGA fan design for reducing noise without sacrificing performance
• Includes the software suite for monitoring and managing EVGA AIO's, EVGA flow Control. Airflow: 74. 82 CFM (Max)

User questions & answers

Question:	Can I swap out the fans on this unit for be Quiet! 140 fans? Thanks
Answer:	Yes I swapped mine for noctua 140 ppc but be aware that evga water block software only report the speed of the stock evga fan I don't why maybe a bug I hook the swapped fans to the motherboard and it's all good
Question:	Does CLC120mm CL 11 fit the kraken G12 Gpu bracket
Answer:	To update, this cooler fits perfectly in a G12 GPU kit. Line the hoses up with the orientation you prefer and it twist locks right in place. My RX 580 idles and 28-30* and peaks at 65* with pump and fan running at 50%. I could ramp them up, but I'm content with a 20* temp drop(yes that equates to 85* peaks on air).
Question:	Is this cooler going to support am4 once ryzen comes out? i plan on making a build with this cooler and would like to know if i should switch
Answer:	I don't have all of the components for my system so I can't speak to the performance of the cooler. The CLC 280 that I received this week included a bag labeled "AM4" which contained 4 stand-offs. There was no supplement to the manual (which doesn't discuss M4 boards) and there was no AMD hold-down ring other than the one for older AMD motherboards. I don't know if I got half of what I need or if the standard hold-down works with the included standoffs. My guess is that they will but I won't know until I start my build.
Question:	Paste included
Answer:	Paste is on cpu part

Product features

Built To Perform

New cooling block offers improved flowrate and heat transfer surface area for incredible cooling efficiency.

RGB LED

Built in RGB LED gives you full control over the lighting including color cycling, or select your favorite color. The color profiles even save to the firmware.

Sleeved Tubing

Fully sleeved tubing from radiator to CPU block.

Product description

The Master Liquid ML360R RGB all in one liquid CPU cooler is custom, inside and out. Our low profile dual chamber pump outperforms its single chamber predecessors in heat transfer. The MasterFan Air Balance fans work with our characteristically sturdy build quality to keep this thing as quiet as a library. Addressable RGB LEDs are installed on both the pump and fans for full color customization that can be controlled through the provided controller. Kink free, factory sealed FEP tubing now comes sleeved for a premium look. Screw it in and experience the quiet muscle of liquid cooling without ever worrying about refills or maintenance. Enjoy the work of decades of thermal innovation.

• Exclusive tech cooler master controls quality and builds on decades of innovation with 100 percent in house design and manufacturing
• Dual dissipation our low profile dual chamber pump enhances performance and durability over our last gen single chamber pump designs; Sizable performance leaps over last gen technology
• 360 millimeters radiator our aluminum 360 millimeters large surface radiator will remove excess heat from the CPU and cool with maximum efficiency
• Addressable RGB LED addressable RGB LEDs on the pump and fans for full color customization that can be controlled through Cooler Master software master plus+ (To be released soon)
• Sleeved FEP underneath sleek black sleeves, FEP material beats rubber tubing in keeping liquid where it belongs inside the cooler; Fan air flow: 66.7 CFM (Max); Fan air pressure: 2.34 millimeter H2O (Max)
• CPU socket support: Intel LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

User questions & answers

Question:	I Bought the lc240e but does ot come with controller
Answer:	IT should include controller and cable
Question:	What does the legacy rgb header on the cotroller do? can i hook other rgb fans or lights up with it
Answer:	The way I have it hooked up is through Cooler Master’s 1 to 3 way splitter on an addressable rgb headed on my Asus z370-e Mobo. You can attach other rgb plugs to that but I’d suggest go straight to your mobo
Question:	Can you mount this at the top of the coolermaster 500M
Answer:	Hello Floyd, You likely won't be able to mount this on either 500M(H500M or the MC500M). The MC500M can only support up to a 280mm radiator on top. The H500M can support a 360mm radiator on top, but it is limited to 43mm clearance from the top. This cooler's thickness is 50mm. CM-PNguyen
Question:	Does it include thermal paste with the cooler
Answer:	Hello, Yes, this cooler comes with thermal paste for the installation. CM-PNguyen

Product features

Cooler Master MasterLiquid Addressable RGB AIO CPU Liquid Cooler 28 Independently-Controlled LEDs Triple 120mm ARGB Air Balance MF

The PPS (Polyphenylene sulfide) and glass fiber construction resists a broad range of chemicals and is unaffected by moisture or immersion in water. Our pump is light and impervious to oxidation and corrosion

Custom design low resistance radiator allows higher flow rate, heat exchange efficiency and provides unmatched cooling performance.

Double tubing FEP tubing makes it durable yet flexible. Sleeved tubing on the exterior to give it a premium look.

MasterFan MF120R ARGB provides a specific air cooling solution ideal to maximize air pressure for AIO liquid cooling. Designed for Builders with Addressable RGB-enabled PCs, you can personalize the color of your fans to match your PC perfectly.

Product description

Thermaltake TH120 ARGB Sync is an all-in-one liquid cooler with singular 120mm powerful high static pressure fan and a smart fan controller. The 120mm highly-efficient radiator to control any escalating CPU temperatures. The TH120 ARGB Sync is designed to exceed user expectations.



P/N: CL-W285-PL12SW-A

WEIGHT: 1430 g

Rated Voltage: 12 V / 5V

Rated Current : 0.37 A / 0.12A

Motor Speed : 3300 R.P.M

WATER BLOCK:

Material: Copper

FAN:

Dimension: 120 x 120 x 25 mm

Speed: 1500 RPM

Noise Level: 28.2 dB-A

Rated Voltage: 12 V & 5 V

Max. Air Flow: 59.28 CFM

Max. Pressure: 1.31 mm-H2O

Connector: 2510–4 Pin , 5 V ARGB header–3 Pin

TUBE:

Length: 400 mm

Material: Rubber

RADIATOR

Dimension: 153x 120 x 27 mm

COMPATIBILITY:

Intel LGA 1200/1156/1155/1151/1150

AMD FM2/FM1/AM4/AM3+/AM3/AM2+/AM2

• [DIGITAL/ANALOG] - Customize pump and Fan lighting with ASUS Aura, Gigabyte RGB FUSION, MSI Mystic Light Sync, ASROCK polychrome or through the included ARGB Controller Offering 7 light modes and 8 full light preset colors
• [READY TO SYNC] - Equipped with an ARGB LED Ring on the pump and ARGB radiator fans, lighting effects can be synchronized with select ASUS, Gigabyte, MSI, and ASROCK 5V RGB header motherboards and controlled via motherboard RGB software
• [LOW-PROFILE PUMP] - Provide quick liquid circulation
• [HIGH PERFORMANCE LIGHTING WATER BLOCK] - Copper base plate accelerates the heat conductivity with dazzling lighting through the specially designed water block
• [HIGH EFFICIENCY RADIATOR] - Large surface radiator increases cooling and provides exceptional heat dissipation
• [NO REFILL REQUIRED] - Reinforced-sleeved low evaporation tubing delivers the best durability and effectively decreases the loss of coolant
• Tube length - 400mm

User questions & answers

Question:	Can it run on just usb cuz i want to put htis on my xbox or does it need to be pluged into a pc
Answer:	Aside from Snaps11, ignore these trolls. They lack the mental fortitude to be able to provide a real answer. No, it will not STANDARDLY fit into the case of an XBox. But the science of whether it will transfer general heat is there. You'll need to find a way to brace the fan in a way that keeps it clear of debris, so I recommend building a small wooden frame that lifts it off of whatever surface the XBOX stands on (to keep clear of settling dust). You will also need to find a way to maintain contact of the cooling plate on the area you wish to cool. Because the cooling is concentrated on the contact area, I recommend purchasing three single fan cooling systems to place where the XBOX heats up the most. This will void the warranty, but I recommend cutting away parts of the plastic casing so that the metal cooling plates can be placed against metal, where the greatest heat transfer can take place. So can these be used on consoles, or anything really? Yes, provided you understand that metal contact is the best way to transfer heat, and you are ok doing an augmentation job on the device you wish to cool.
Question:	does it work on ryzen
Answer:	It does come with the mount for the new and ryzen
Question:	what size are the fans
Answer:	120's I replaced them with Corsair Air Series SP 120 LED High Static Pressure Fans Cooling. Cooler is working great. Rig is running between 32c and 42c.
Question:	can you put coolant instead of water in this
Answer:	You could, but it's not necessary. The reason anti-freeze is used in cars is because the range of temperatures a car's engine may be exposed to are wider than your computer. People who say anti-freeze is just to stop water from freezing are wrong. If they were right, people in hot climates would only need water in their cars, but just using water will overheat the car due to the climate + engine heat. Ethylene glycol is called antifreeze, but could just as easily be called "anti-boil" since it's boiling point is 235F! So unless your CPU is going to be running at over 100C? You don't need "coolant/antifreeze" as well as water.

Product features

Install with Ease

The TH120 ARGB Sync provides an easy installation system that supports Intel 115X as well as AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2 sockets.

Small Package, Big Performance

The TH120 ARGB Sync combines a highly efficient radiator with a high static pressure fan to keep your CPU running cool

Product description

The Kraken M22 features two individually addressable RGB channels and our signature infinite-mirror effect for stunning lighting, using Cam's intuitive controls. It includes precision engineered fans and Premium build quality, and is backed by the assurance of a 3-year. Light your Way- Customize the look of any Cam- powered Kraken pump with the most advanced RGB lighting effects and our signature infinity mirror. Both the Kraken X and M Series include numerous customizable presets and reactive modes to respond to changes in system conditions, such as temperatures and audio output. Reinforced Extended Tubing-Fine nylon sleeves are added to strengthen the rubber Tubing and act as a protective layer, shielding your Kraken cooler tubes from potential damage during handling.

• Advanced Lighting Modes: With an infinity mirror Design, add amazing color and lighting to your CPU cooler for a fully dynamic lighting experience
• Engineered For Performance: Engineered to achieve superior cooling while keeping noise levels to a minimum. System Requirements-CAM software requires Microsoft Windows 10 operating system
• Master Your Control: Using CAM, manage the performance with precision and make changes quickly, using the desktop or mobile app. You can even monitor pump speed and liquid temperature.
• All-New Radiator Fans: The Aer P radiator fans included are Designed for liquid-cooling perfection; Providing silent operation, durability, and powerful cooling performance. Fan Noise Level - 21-38dBA
• Warranty: 6 years

Product features

Engineered For Performance

Kraken Series features a pump that is both quieter and capable of displacing more liquid than previous generations. The enhanced design achieves superior cooling with efficiency while keeping acoustics to a minimum.

Master Your Control

The Kraken enables independent tuning for the fan and pump performance. Through CAM’s intuitive designs and full software integration, the most precise and sophisticated controls can be made with ease.

• Anti-leak Tech Inside, exclusively safe. Flow route optimized to reduce operation noise and energy loss.
• 25% more skived fins on the back side of the copper base, the heat absorption area extensively increased. Ultra large copper base, extensive compatibility. It supports LGA20XX/1151/1150/1155/LGA1366 and TR4/AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1.
• 2 specially tuned TF120 S fans are included (in matching the radiator's properties).
• Customizable Logo, exciting DIY experience!!
• 5V 3-pin Addressable RGB, controlled by motherboard with 5V 3-pin ADD-RGB header or cable controller.

User questions & answers

Question:	Does it work with i9 9900 cpu
Answer:	Yes
Question:	what is the difference between this and the Captain series? Is it just looks
Answer:	1. Castle 240EX is with Anti-leak tech inside. 2. It is TR4 compatible. 3. It is with 5V 3-pin ADD-RGB. 4. The Logo in the pump is customizable.
Question:	What kind of extra Logo included
Answer:	The extra logo is blank and you can diy your own logo on it.
Question:	Is this aio's rgb and/or fan control compatible with an msi b450 tomahawk max motherboard's connection types
Answer:	Yes it is compatible with the b450 pins and mystic lights. I also tested it on Aorus (rgb fusion )and it works

Product features

CUSTOMIZABLE LOGO

The logo is upside down? Simply twist off the pump cap, adjust (4 directions available) and attach it back on!

Want to change the logo? An extra logo chip is included. Buyer or make your favorite logo and stick on.

BEST MATCHING FANS

2 specially tuned TF120 S fans are included (in matching the radiator’s properties). The fans are also equipped with patented two-layer fan blades and flow-amplifying & noise-canceling frames.

5V 3-pin ADD-RGB

Equipped with a mirror finish, immersive lighting and infinitive visual effects, CASTLE 240EX inherits its familial fabulous appearance. Its Addressable RGB lighting is adjustable through the 5V motherboard SYNC function or through an included controller.

*Also controllable by motherboard 12V SYNC function via DEEPCOOL RGB convertor (not included).

MORE EFFICIENT FLOW

With 25% more skived fins on backside of the copper base, the heat absorption area is extensively increased.

With more rounded corners implemented into its design, the upgraded double chamber has optimized flow route and increased heat exchange efficiency. This also contributes to reduction of operation noise and energy loss.

EXTENSIVE COMPATIBILITY

With an ultra large copper base, the cooler is compatible with all mainstream CPU platforms, including the TR4.

It’s smaller in size, therefore can be installed in any direction.

Product description

TUF Gaming LC 120 RGB is a series of durable CPU liquid coolers designed for mid-sized gaming builds. Each cooler brings the performance, features and design needed to be an essential part of your gaming system. CPU socket support includes: Intel LGA 1200, 1150, 1151, 1152, 1155, 1156, 1366 and AMD: AM4

• TUF Gaming radiator fans with fan blade groove design for optimized airflow and reduce fan noise.
• NCVM-coating pump cover accentuates the rugged, modern aesthetics
• Styled to complement TUF Gaming motherboards, at the center stage of your build
• Reinforced, sleeved tubing for increased durability

Product description

ROTATABLE Cap Mount the cold plate at any orientation, turn the cap up to 270 degrees to keep it upright. RADIATOR PUMP DESIGN The pump has been integrated into the radiator for sound dampening and noise reduction. PUMP MOTOR RESONANCE ELIMINATION A durable three phase motor at the core of the pump generates minimal vibrations for long-lasting operation

• TIMELESS RELIABILITY - The motor ceramic bearing has been designed to stand up to 100,000 hours of life expectancy.
• TOTAL RGB FAN CONTROL The included RGB fans support custom speed with PWM fan and customizable lighting through software.
• ROTATABLE CAP - Mount the cold plate in any orientation, turn the cap up to 270 degrees to keep it upright.
• RADIATOR PUMP DESIGN - The pump has been integrated into the radiator for sound dampening and noise reduction.
• Compatible Socket & CPU: Intel LGA1150/1151/1155/1156/1200, LGA1366, LGA2011, LGA2011-3, LGA2066 / AMD AM4, FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2

User questions & answers

Question:	I connected the 3 pin header to motherboard that have jrainbow connector but there still no light on the coller
Answer:	You need to use the msi mystic light software to control the LEDs
Question:	will this work on a ROG Crosshair viii hero mother board
Answer:	Yes it will. I use it on mine.
Question:	Does this work with the msi z390 a pro motherboard seeing that it has a 4pin rgb header or what not
Answer:	If your has the 4 pin header, that is 12 volt RGB header. This unit I believe is set up for the 5 Volt 3 pin ARGB header. NOT COMPATIBLE AT ALL.
Question:	Does it come with thermal paste or do I have to buy that separate
Answer:	It comes with Thermal Paste, but the one I got was junk. It was hard and not usable

Product features

EVAPORATION PROOF TUBING

Constructed with three layers of netted plastic tubing and a reinforced mesh exterior.

RADIATOR PUMP DESIGN

The pump has been integrated into the radiator for sound dampening and noise reduction.

PUMP MOTOR RESONANCE ELIMINATION

A durable three phase motor at the core of the pump generates minimal vibrations.

HIGH THERMAL DISSIPATION

A split pathway through the radiator rapidly dissipates heat.

EXTENSIVE COMPATIBILITY

Intel: LGA 1150, 1151, 1155, 1156, LGA1200, LGA1366, LGA2011, LGA2011-3, LGA2066

AMD: AM4, FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2, sTR4, sTRX4, SP3

Step-by-Step Installation Videos for MAG CORELIQUID Series

Demonstrated on Intel LGA2066 motherboard. Similar steps for LGA2011, LGA2011-3 socket motherboards.

Step-by-Step Installation Videos for MAG CORELIQUID Series

Demonstrated on AMD sTRX4 motherboard. Similar steps for sTR4, SP3 socket motherboards.

Step-by-Step Installation Videos for MAG CORELIQUID Series

Step-by-step videos provided by MSI demonstrate the MAG CORELIQUID Series secure installation procedure for a number of Intel and AMD motherboards.

Step-by-Step Installation Videos for MAG CORELIQUID Series

Demonstrated on Intel LGA1200 motherboard. Similar steps for LGA 1150, 1151, 1155, 1156, 1366 socket motherboards.

Step-by-Step Installation Videos for MAG CORELIQUID Series

Demonstrated on AMD AM4 motherboard. Similar steps for FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2 socket motherboards.

Product description

Be unstoppable with the unprecedented speed of the world’s best desktop processors. AMD Ryzen 5000 Series processors deliver the ultimate in high performance, whether you’re playing the latest games, designing the next skyscraper or crunching scientific data. With AMD Ryzen, you’re always in the lead.

• AMD's fastest 8 core processor for mainstream desktop, with 16 procesing threads
• Can deliver elite 100+ FPS performance in the world's most popular games
• Cooler not included, high-performance cooler recommended
• 4.7 GHz Max Boost, unlocked for overclocking, 36 MB of cache, DDR-3200 support
• For the advanced Socket AM4 platform, can support PCIe 4.0 on X570 and B550 motherboards

User questions & answers

Question:	Does this come with far cry 6? as per amd, amazon is part of the program and yet they do not mention anything
Answer:	3100 is better for gaming
Question:	How do i get the far cry game? I bought as soon as it dropped initially but I've yet to receive any code
Answer:	Amazon did not up the price, Newegg did. MSRP for this CPU is $99.99 which Amazon does sell at when in stock. Anything above that price is sold by a 3rd party vendor. With supply and demand, you have to be watching this page daily for a restock.
Question:	Why are they selling this without a heatsink and fan
Answer:	Hello Kenny, No this will not work with a 1320. This printer will not accept an external jet drive.Thanks,Ben
Question:	Can this only be bought from scalpers
Answer:	No this will not work with the 1300.

Product description

With four direct mount copper heatpipes, software controllable RGB lighting, and a two position fan. It is the ultimate in a stock CPU coolers that we have come across in memory. The Prism served us very well in our AMD Precision Boost 2 and Wraith Prism Deep Dive article, which took place on an open test bench, which of course showed it in the best light possible. Let's now take that same cooler and put it on our HSF/AIO test system, which of course is more a "worst" case possible scenario, and see how it does. We are likely putting more heat to it than it will likely ever see in a real 2700X configuration, but we do separate the wheat from the chaff. Official Genuine AMD Branded Product Supports Motherboard Socket: AM2/ AM3/ AM3+ / AM4 Aluminum heat sink with copper core base - Pre-applied thermal paste Direct Contact Heat pipes Switchable Overclock Fan profile ? Fan was removed from a CPU not for sale in retail and is new. Base may have imperfections and is normal.

• Official Genuine AMD Branded Product
• Supports Motherboard Socket: AM2/ AM3/ AM3+ / AM4
• Aluminum heat sink with copper core base - Pre-applied thermal paste
• Direct Contact Heat pipes
• Switchable Overclock Fan profile

User questions & answers

Question:	Does this fit a Ryzen 5 1600x
Answer:	need brackets for new clip type mount. Old amd fan screwed too MB. What bracket needed?
Question:	Will this support core i5 and fit the asus rog strix z390-f gaming motherboard lga
Answer:	No, this only fits am4
Question:	Will this work on a ryzen
Answer:	Yes it will q
Question:	Will this work with a ryzen 5 2400g
Answer:	Yes! This cooler is compatible with ryzen 5 2400g. No worries. Regards.

Product description

The Wraith ripper is a product developed through an exclusive collaboration between Cooler Master and AMD. The Master Fan Pro 120 servo, seven copper heat pipes Air cooler is designed to keep the AMD's 2nd generation Ryzen Thread ripper CPUs cool under any computing condition. The dual tower heatsink covers more surface area. Creating a more effective way of dissipating heat.

• Designed & Optimized for Socket TR4Features a larger contact surface area that is specifically tailored for Ryzen Thread ripper
• Dual tower heatsink a combination of 2 sets of heatsink covers more surface area and dissipates heat more efficiently; The Jet black paint enhances cooling performance
• Build in Wraith ripper RGB software with our exclusive partnership Cooler Master and AMD designed a software that allows you to take full control of your rig's lighting
• Easy TR4 mounting system exclusive all in 1 TR4 mounting design for Easy installation
• Cpu socket support TR4. Fan Dimensions (L x W x H)-4.7 x 4.7 x 1 inches

User questions & answers

Question:	Will this fit a msi x399 gaming pro carbon ac motherboard? the motherboard has a heatsink above the cpu, i'm worried this cooler may not clear that
Answer:	Depends, my case fits a 200 mm fan. A 120 mm fan is about 4.75", and a 200 mm is just shy of 8".
Question:	Will this fit into a p350x case? max height is 160mm & this is 160.5mm. any wiggle room
Answer:	Hello Jin,The MasterCase 5 supports a 120mm fan on the top and rear.CM Myke
Question:	anyone know the tdp for this cooler? haven't found an answer yet
Answer:	I have two of the fans in the computer I'm building at the present time and neither one emits any light. I hope that helps you out.
Question:	Release Date
Answer:	No,this is not made to work with 12 volt battery. This is made to work with a computer only. The fan has a length of wire built into it with a 3 pin connector that plugs onto a fan header on the motherboard. The 3 wired included wire harness is to hook up to power the fan with molex power the 4 pin connectors. If you already have all the fan headers of the motherboard occupied by other fans,you can't use the 3 pin connector built onto the fan wire.This is where the 3 wired harness helps. The 3 pin connector snaps onto the 3 pin connector on the fan wire and then you use the molex power the 4 pin connectors to power the fan, and since there is a male on one end and female on the other you have the option to power the fan for the connection you have.

Product features

Cooler Master AMD Wraith Ripper

• Specialized air-guide armor designed to guide the flow of air for peak cooling performance and reduce dead heat spots on the cooler. The armor is also illuminated by number of addressable RGB LED's for full color customization.

• AMD Ryzen Threadripper has up to 32 cores within the package. To ensure heat is transferred and removed quickly and evenly, Wraith Ripper is custom fitted to provide full coverage.

• A combination of 2 sets of heatsink allows bigger and more spread out surface area. The black paint enchanes radiation cooling performance