10 best fan controller for desktop
A fan controller for desktop computers is a hardware device that allows users to manually adjust the speed and performance of their case fans and cooling systems. It is an essential component for managing the airflow and temperature inside a computer case. Here are the key points related to fan controllers:
Temperature and Noise Control: Fan controllers help users strike a balance between cooling and noise reduction. By adjusting fan speeds, users can cool their components adequately while keeping noise levels within acceptable limits.
Manual and Automatic Control: Fan controllers offer both manual and automatic control options. Manual control allows users to set fan speeds based on their preferences, while automatic control can be based on temperature sensors, ensuring optimal cooling as needed.
Number of Channels: Fan controllers typically come with multiple channels or ports to control various fans independently.This allows users to customize the speed of different fans within their case.
Mounting Options: Fan controllers can be integrated into the computer case, mounted in an available drive bay, or even installed as a separate external device. The choice depends on the user's preference and the available space in their case.
Display and Interface: Many fan controllers feature an LCD or LED display that provides real-time information about fan speeds and temperatures. Some controllers come with touchscreen interfaces or knobs for easy adjustments.
Compatibility: It's essential to ensure that the fan controller you choose is compatible with your case fans and motherboard. Check for the type of connectors (3-pin or 4-pin) and the power requirements of your fans.
Performance Monitoring: Some advanced fan controllers can also monitor system temperatures and provide warnings or alarms if temperatures exceed preset limits.
Cable Management: Proper cable management is crucial when installing a fan controller to maintain good airflow and aesthetics within the computer case.
Benefits: A fan controller helps maintain a cooler operating temperature for the CPU and other components, potentially extending their lifespan. It also allows users to reduce fan noise during idle or low-demand tasks.
Overall, a fan controller is a valuable component for users who want precise control over their computer's cooling system, ensuring that it operates optimally for both performance and noise levels.
Below you can find our editor's choice of the best fan controller for desktop on the market- This fan speed controller can control the speed manually and automatically to prevent computer hardware damage from overheating effectively -It can slow down the speed when high temperature and fan abnormal, also can adjust trough manually setting the fan speed to regulate the computer temperature.
- Controls and Monitors 3 Sets of Fan Speeds and Temperatures
- Large LED screen display- showed date, time and temperature, etc. , you can master the computer working case.
- Install at 5.25inch drive bay, suitable for more than 90% of computer chassis
- High-temperature industrial plastics material, and PVC lens.
User questions & answers
Question: | Can the screen be turned off |
Answer: | cann't be turned off. Three buttons on it: mode alarm c/f speed. |
Question: | Is this dell 5 pin fan compatible, or will it cause the bios to report a fan error at every boot |
Answer: | Its pretty much universal i put it in 2 different rigs now it pretty much just monitors the temp of the system,cpu and hard drive but also changes fan speen individualy. Ive never noticed any bio problems and ive had mine 4 awhile now. |
Question: | How is it powered |
Answer: | use 12V & 5V two sets of power supply |
Question: | is it only in celsius or can you change the temperature to Fahrenheit |
Answer: | yes, press the button ALARM C/F about 3seconds to adjust. |
Product features
Large LED Screen display
1.Showed date, time and temperature, etc. , you can master the computer working case.
2.High-temperature industrial plastics material, and PVC lens.
Install at 5.25inch drive bay
Suitable for more than 90% of computer chassis
Controls and Monitors 3 Sets of Fan Speeds and Temperatures
Description:
This fan speed controller can control the speed manually and automatically to prevent computer hardware damage from overheating effectively
It can slow down the speed when high temperature and fan abnormal, also can adjust trough manually setting the fan speed to regulate the computer temperature.
Package include:
1x Fan controller
4x screws
Product description
Type: Desktop Fan Controller
Display: LCD
Screen Size: 5.25"
Size: 140mm x 180mm/5.51" x 7.09" (Approx.)
Note:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
Package Includes:
1 x Desktop Fan Controller
- Fan measured speed range display.
- An measured temperature range display.
- AUTO/MANUAL manual mode automatic mode switch.
- Display: LCD
- Type: Desktop Fan Controller
Product description
Bitspower Touchaqua Notos RGB 120mm Case Fan
Better Price/Performance
The Notos 120 DRGB Fan has been uniquely designed by Bitspower Touchaqua in order to provide the most efficient cooling at a fantastic price.
Efficient Airflow
With a maximum speed rate of 1800RPM, which can be adjusted via the supported PWM, the 120x120x25mm fan is well suited to be paired with our radiators for efficient cooling.
Quiet
Equipped with vibration cancellation rubber pads on all four corners, rattling noises will be a thing of the pasty while you game, stream, watch a movie or work.
Nice and Bright
RGB enthusiasts will be pleased to know that the Notos 120 DRGB Fan features digital RGB LEDs around the center shaft, providing stunning lighting effects.
Wide Compatibility
In addition to being able to "daisy chain" the RGB interface of your fans, Bitspower Touchaqua has also had the product certified by ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, and Razer Chroma to ensure fully synchronized lighting of your system.
SPECIFICATIONS
Dimensions: 120 x 120 x 25 mm/ 4.72 x 4.72 x 0.98 in.
Max Fan Speed: 1800 RPM
Maximum Air Pressure: 1.2 mm/H2O
Airflow: 59 CFM
Noise Level: 28 dBA
PWM Support: Yes
Power Connector: 4-pin
PACKAGE
3x Case Fan
1x PWM Fan Multi-Function Hub
1x Digital RGB Multi Function Controller
12x screws
- Computer Case Fan. This 120mm case fan supports PWM fan control allowing for dynamic speed adjustment up to 1800 RPM, providing efficient cooling to computer case, CPU, and be paired with radiator. 550mm long cable for freely installation and wide compatible for all kinds of case
- RGB Case Fan. the Notos 120 DRGB Fan features digital RGB LEDs around the center shaft, providing stunning lighting effects. Optimized fan blade provides efficient airflow up to 59 CFM, great choice of your CPU cooler and PC fan
- Silent Fan. Noise Level: 28 dBA. Hydraulic bearing self-lubricates with friction-reducing oil ensuring lower operation noise. Vibration cancellation rubber pads on all four corners of the PC cooling fan, make no rattling noises while you game, stream or work
- High Quality PC Case Cooler. This case fan is made of heat-resistant, anti-aging high strength plastics. PBT frame, PC blades, and premium bearing work together to improve thermal efficiency while maintaining a long lifespan
- 4-Pin Case Fan. Product certified by ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, and Razer Chroma to ensure fully synchronized lighting of your system; Being able to "daisy chain" the RGB interface of your fans
User questions & answers
Question: | Does this connect to gigabyte b450m ds3h |
Answer: | It is for the sega master console only |
Product description
Designed for 12V 8 Way 3pin Fan Hub Speed Controller Regulator.
Power interface SATA supplies,support simultaneous starting of 8 channel 3pin fans,which can expand one interface of the motherboard into 8 ,solving the problem of shortage of motherboard.
Features:
1.This 8-way RGB hub is suitable for PC desktop computer motherboard.
2.Space saving: It will save your space effectively and make the cable management easier, and make the inside case neat and tidy.
3.Without function of speed detection and PWM, you can manually shift the gears, start the fan at full speed or low speed,or turn off the fan.
4.Material: Metal & Plastic
5.Product Dimension: 53x 48mm
Package List:
1 x 1-to-8-Channel Hub of 3pin Chassis Fan
1 x Manual
- ✪ SATA Cooling Fan Splitter Suit for 12V 3Pin fan (8 channels).Using SATA interface.Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.
- ✪ Suit for 12V 3Pin fan (8 channels).Using SATA interface.Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.
- ✪ Built-in double-sided adhesive: This compact HUB easily fits inside your pc case. It can be used to fix the hub in the chassis.
- ✪ 8 way without speed measurement and PWM function, you can manually adjust the gear position, start the fan at full speed (LOW) or low speed (LOW), or turn off the fan.
- ✪ EASY INSTALLATION:It is very easy to setup. Connect your RGB items to the hub, connect the included cable to any pin on the hub then connect the other end to any RGB header on your motherboard and lastly connect a SATA cable from your PSU to the hub to provide power.
- 2 IN 1 USB Cooling Fan 120mm, 2 fans connect to one USB cable and work together. for cooling Receiver AV cabinets Game console PC Laptop TV Box Projector Router.
- A speed controller with three gears(Low, Middle and High), which is specially designed to control the airflow levels. Meet your different needs.
- USB plug can power the fan through USB ports found behind popular AV electronics and game consoles.
- 120mm USB Cooling Fan Dimensions: 4.7 x 4.7 x 1 in per fan size | Totally size: 9.8in x 4.9in x 1.8in | Totally Speed: 1600RPM |Totally Airflow: 118 CFM | Total Noise: 25.8 dBA | Bearings: Sleeve Bearing
- Sleeve Bearing Design,Make the sound is only about 20 decibels, which is almost silent, and it will not make you noise in the bedroom, perfect and no noise pollution. So you can heat dissipation of various electronic equipment and boost speed easily. Whether you are at home or in an office, this cooling fan just like a portable mini radiator can serve you anytime, anywhere.
Product features
120mm Dual USB Fan
120mm USB cooling fan can be positioned to stand upright or laid flat to cool various electronics and components.Such as: laptop, desktop, receivers, DVRs, video game consoles, modems, computers, amplifiers,tv box, AV cabint, PS4, projector, router and other audio video equipment.
Use it in any places with USB power supply.
Fully Protection
Includes one 120 mm metal fan guard and screws set. Metal fan guard can protect your hands and fan blades.
3 Speed Controller
Increases maximum fan speed and enables the fan to be powered through USB Plug
USB Powered Supply
Allow you to use it everywhere with USB port, convenient
Product description
KLLsmDesign computer fan HUB temperature control fan integrator,Support 8 PWM (4 PIN interface) intelligent temperature control, 10 ARGB fans (3pin)
Package includes: Fan controller*1;Remote control*1 ;SATA power cord *1 ;Temperature control line *1;Motherboard sync line *1;Support up to 18 fans:
Front interface: 4 PWM interfaces, the first one in red is recommended as a CPU fan interface; 4 ARGB interfaces
Rear interface: 4 PWM interfaces, 4 ARGB interfaces
Left interface: the two-pin interface is the restart switch interface (restart button can not be connected), the middle red 4pin is the sata power supply interface, and the third interface is the 5V 3pin motherboard interface
Right interface: 2 ARGB interfaces (can be connected to the computer light belt), the two-pin interface is the temperature control signal interface
Support remote control switch fan
The wireless remote control can remotely control and approach 365 kinds of lighting modes. You can switch the fan, switch the speed, switch the mode, adjust the brightness and other play methods through the remote control. You can freely use your imagination and find more surprises.
Note: Please be sure to install when the power is off, and don’t insert any wrong interface, so as not to cause a short circuit to burn your equipment
- Desktop Computer P-argb Fan Temperature Control Controller:direct SATA Power Input, support 8 PWM intelligent temperature control (4-pin) + 10 5V ARGB interface (3-pin) + remote wireless remote control three in one function, enables users to optimally expand cooling capability within the chassis
- Cool Luminous Shell: The fan thermostat looks like a sports car, length: 118mm, width: 55mm, height: 24mm
- Accessories: The package contains RGB fan thermostat x1, SATA power cable x1, temperature control cable x1, motherboard sync cable x1
- Wireless Remote Control Function: The controller is equipped with a wireless remote control switch, which can freely switch between the hosting mode and the remote control mode. There are about 365 light modes to choose from
- PWM Fan Controller: The back uses a magnet device, which is easy to be attached to the inside of the chassis for easy installation. Supports 5v motherboards such as ASUS, MSI, Gigabyte, and ASRock.
Product description
This case fan speed controller is specially designed for 2-wire and 3-wire cooling fan supporting auto and manual speed control mode. On-board momentary push button swtich to set the temperature control range and working mode ideal for computer chassis cooling fan speed control.
Specifications:
Working Voltage:DC 12V
Working Current:0.8A
Temperature Sensor Probe: 50K 3950
Speed Output Control Range:5%-100%
Module Size:43X18X9mm/1.69X0.71X0.35inch(L*W*H)
Package Included:
1X 4 Wire PWM Case Fan Thermostat Speed Controller
1X Temperature Sensor Probe
Working Mode Setting Instructions
Manual Mode:do not install the temperature sensor,then single press (increase)/double press(decrease) the button to change the fan speed(after change the speed and wait 20s, it will save the setting automatically,during this process,the 2th indicator will flash,when the speed can not increase or decrease, the 3 and 1 indicator will flash)
Auto temperature control mode:install the temperature sensor,the manual set speed as the intial speed,when the temperature reach the speed-up temperature(Tu),the fan will speed up,when the temprature reach the full speed temperature, the fan will rotate in full speed.(the setting instructions please refer to the picture)
Fan Shutdown Mode:support non shutdown working mode;2 degree lower than than speed up temperature(Tu) will shutdown;5 degree lower than than speed up temperature(Tu) will shutdown. power off the module, then press the button but do not release and power on the module until 3 indicators flash at the same time to enter the mode setting, press the button to change the mode,after setting, long press the button to save the working mode.
- 2-wire and 3-wire computer chassis cooling fan speed controller module compatible with 0.8A or below cooling fans
- Support manual speed control and auto temperature control working mode with automatic shutdown
- On-board momentary push button switch to set the paramenter and 3 indicators to dispaly, easy to operation
- Working Voltage:DC 12V ,Working Current:0.8A,Module Size:43X18X9mm/1.69X0.71X0.35inch(L*W*H)
- Shipped out by USPS with tracking information and 7-17 days delivery time usually
User questions & answers
Question: | Does this controller work by regulating the voltage to the fan? is it suitable for a 12v 2-wire fan that runs ok between 5v and 12v input power |
Answer: | Yes, it is just a different design. It will play all sega master system games. |
Question: | I have a noisy poe switch which has two 3 wire fans. the switch requires the rpm return signal or it will shut down the switch. would this item work |
Answer: | Hi yes, the controllers are included. And a free game.Amazon Seller: Play-USA-Games |
Question: | Are there any easier to follow instructions for setting this up? I lost the original instructions, and the ones posted here are barely comprehensible |
Answer: | no box sorry just console 2 after market control pads ac adaptor and av cord. sorry no box see pic on my add |
Question: | will this run on 5v? 9v |
Answer: | Mine came with two controllers - not the original controllers but the generic ones that look like the Atgames Sega Genesis controllers. The number of accessories depends on what the seller is offering at the price you want. If you see one that says it comes with the console and two controllers, you should get what it says. If it doesn't come as described, I think you should contact the seller and if the situation still doesn't improve, report it to Amazon. |
Product description
This computer fan controller can manually set up the alarm temperature range from 40 to 90 degree. When the fan breaks down and can not cool the computer, it will alert immediately. AUTO /MANUAL manual mode automatic mode switch. Smart adjust the computer temperature though controlling the wind speed of 5 groups of fans. Big LCD screen to display the temperature, fan speed, alarm temperature, hard disk state, to constantly know the the working condition.
Specifications:
Color: Black
Size: 150 × 77 × 43mm / 5.61 × 3.03 × 1.69inch
Display: LCD
Installation Site: Drive position
Controllable Fan: 5 fans
Materials: High resistance industrial plastic
Output Voltage: 5V-12V
Input Voltage: 5V and 12V
Package Included:
1 x Computer Fan Controller
4 x Screw
1 x Sticker(For fixing temperature probe)
Note:
1. Please allow 1-3cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
- AUTO /MANUAL manual mode automatic mode switch
- Big LCD screen to display the temperature, fan speed, alarm temperature, hard disk state, to constantly know the the working condition
- Smart adjust the computer temperature though controlling the wind speed of 5 groups of fans
- Can manually set up the alarm temperature range from 40 to 90 degree
- When the fan breaks down and can not cool the computer, it will alert immediately
User questions & answers
Question: | Does this unit also display the Date and Time on the front panel lcd |
Answer: | Dear customer, There is an iPad holder on the rowing machine. You can set an iPad or a book when exercising. |
Product features
Why Do You Choose US?
We've been working in electronics for years and accumulated rich experience, and now we want to share our products'preferences and ingenuity for you to bring you a more fashionable and artistic life experience.
BUY WITH CONFIDENCE - There are plenty of standard similar products on the market to choose from. Why buy from us? Simple: Peace of mind at your special event. We're obsessive about making sure that each one of our product is produced to the highest standard that we ourselves would expect. From the quality, size, color, Appearance, practicability and application of each product, we take pride in considering from the customer's point of view. So relax, we got you covered!
As a reliable seller, we always try our best to provide good quality products as well as excellent service to our customers, your trust and business is that important to us. If you are not 100% satisfied with the quality of the product, pls feel free to let us know about the issue, you will be assisted ASAP.
Product description
AeroCool F6XT Fan speed controller with color LEDs display. 3 speeds setting control up to 6 Fans. Easy push button control to adjust fan speed between low, medium, or high, and to switch LED color display between Blue, Red, or OFF. Connectors: 6 x 4-pin Molex connectors. Support fan up to 12 watts per channel. Include 4 screws. Dimension: 148.6(W) x 42.5(H) x 65(D) mm = 1 x 5.25" bay. Customer Service: Supportataerocool.us or call 510-661-9948. RMA Service: RMAataerocool.us or call 510-661-9948.
- Controls and monitors 6 sets of fan speeds
- Dual LED colors and LED OFF display
- Support up to 12W per fan channel
- Controls and monitors 6 sets of fan speeds
- Dual LED colors and LED OFF display
- Support up to 12W per fan channel
User questions & answers
Question: | Does the fans connect with molex connectors or what |
Answer: | Technically yes, but being it's a 2 button controller, whereas the Genesis controller is 3, a lot of games won't play as well without that 3rd button. The Sonic games seem to be the only games that work well with it. The 1-button jumps, and the 2-button pauses. Other games I tested: Contra Hard Corps & Gunstar Heroes, none of the buttons do anything at all. Streets Of Rage 1 & 2 buttons overlap: 1-button does both punch and special at the same time, and the 2-button does jump & pause at the same time; annoying. |
Question: | how many temp. probes does this product have |
Answer: | It comes with all hook ups and 1 controller |
Question: | does it come with all wires connectors |
Answer: | Yes this is all complete in the original box |
Question: | What color are the LED fronts? I see red, blue, and white, is that all |
Answer: | This console will play sega master system games. Not mega drive or genesis games. Hope this helps |
Product description
Description:
This is a worthy speed controller for computer fan. With 4 adjustable channels, it can control 4 fans of the computer at the same time, and efficiently protect your computer from heating. Working without noise, you can continue to work on your computer easily and safely.
Specifications:
Color: Black
Output Voltage: DC 12V
Output Power: 8W for Each Channel
Voltage Range: 5 - 12V
Power Indicator: LED Indicator (Blue Light)
Length of Cable: Approx. 60cm
Installation Location: Floppy Drive
Interface: 4P Male Head + Female Head
Fan interface: 3Pin + 4Pin
Controllable Fans: Max. 4 Sets
Size: Approx. 10 * 10 * 2.1cm
Package Weight: 150g
Package List:
1 * Fan Speed Controller for PC
1 * User Manual
- Four channels for speed and temperature controlling, capable to manage 4 fans at the same time or adjust the individual fan speed.
- Effectively for heat reducing, maintain the proper temperature to keep all parts of the computer running well.
- Reduce noise, work quietly and do not disturb you while you are working and studying on the computer.
- 3.5’’ floppy drive interface, easy to install.
- With blue LED which displays the working state of the speed controller, simple and elegant.
Latest Reviews
View all
Guitar Volume Pedals
- Updated: 10.01.2023
- Read reviews

Plastic Trumpets
- Updated: 13.04.2023
- Read reviews

L Oreal Paris Mousse For Curls
- Updated: 22.06.2023
- Read reviews

Vitamin For Healthy Nails
- Updated: 02.03.2023
- Read reviews

Audiobooks For Tweens
- Updated: 08.03.2023
- Read reviews