14 best computer fans

• Higher air flow to enhance cooling performance
• Economic solution for perfect performance
• RoHS compliance for protecting the environment
• 3 IN 1 Value Pack
• Ultra silent operation at 19 dBA

User questions & answers

Question:	are these at the fasted speed connected to the molex
Answer:	The fan has an arrow on it show the direction of the air flow. They can be mounted to blow out of or into the case.
Question:	do these need to use the molex power connector
Answer:	My take on these fans is vendor quality, as for air flow, that depends in part on your case.
Question:	pin connection
Answer:	Not right off, it’s just the standard screw size
Question:	Do the fans come with screws? Cause I dont have any
Answer:	12v

Product features

Product description

• Product Size: 120 * 120 * 25mm
• Pitch: 10.5cm
• Rated voltage: 12V
• Current: 0.12A
• Input power: 1.44W
• Speed: 1200RPM (constant speed)
• Air volume: 38CFM
• Static pressure: 58Pa
• Noise: 19DB
• Weight: 130g

• Cool RGB Light: GIM RGB case fans allow you to enjoy the beautiful and cool RGB lighting effects in 16.8 million colors, provide excellent heat dissipation, add fun and bring you better gaming experience.
• 3 Music Modes: To further optimize your gaming experience, the fans are designed with 3 different music modes and each music mode has it’s own lighting mode, which creates awesome visual and audio effects and help you play games in high spirits.
• RF Wireless Remote: A wireless control is included for convenience and easier operation. By only one key, you can easily adjust fan speed (S/M/H)/ lighting effects/ brightness/ LED speed without opening the case.
• Synchronizable RGB Lighting via Motherboard: It allows you to control fan lighting with 5V addressable RGB motherboards. Compatible with motherboard software includes US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, etc.
• No Risk to Purchase: Any quality issue with your fans, please feel free to contact us and let us know. We will try our best to help you! GIM strives to bring the best customer service!

User questions & answers

Question:	Can i use this hub with other gim fans
Answer:	Not sure what your asking if you mean the size of the plug I don’t no the measurements
Question:	Is there a way to keep the fan lighting on Rainbow mode? The menu/auto button shows it at the start but then it cycles through all the other modes
Answer:	Dario has two types of meters, one specially designed for iso (iPhone) devices and another designed for android devices.
Question:	I have a question, i bought two of these 3 packs but used only one hub and the rgb flickers and the fan works? how do i fix the rgb
Answer:	The plans seem to be different depending on when/where you subscribe. All the plans now seem to be unlimited strips with any plan.. Within the app, $20/mo billed annually gets a new meter every 2 years. In the website $25/mo billed annually with free meter.. Giving it a try, first few readings agree with my regular meter within a couple of points.
Question:	How do i make the rgb controller sync with asus aura
Answer:	yes

Product features

What can GIM RGB case fans bring for you?

Synchronizable RGB lighting via motherboard

Sync ready with all mobo houses including Gigabytes, Asus and MSI

Extreme Cooling Performance

33.5 CFM, GIM Fan optimized heat dissipation and hydraulic bearing to ensure ultra-quiet operation

Smart Music Modes

With built-in high sensitive sound sensor, this fans can change different lighting modes with the rhythm of music, make you enjoy the feast of sight and hearing when you play intense computer games playing or listen to any music with strong rhythm.

New Blade Design

Revised curve blade design to improve airflow and air pressure. A refreshed blade for improved lighting.

Specifications:

Fan Dimension: 120mm(W) x 120mm(D) x 25mm(H)

Fan Speed: 0-1300

Rated Current: 0.35A

Noise Level: 0-15 dBA

Rated Voltage: DC 12V(fan) / 5V(LED)

Power Input: 1.92W

Lifetime: 20000 Hrs

Controller Connector: 6 PIN(for fan),2*4 PIN(for LED strip)

Package Contents:

3 x 120mm Cooling Fan

12 x Mounting Screws

1 x Controller

1 x Remote

1 x SYNC Cable

• Designed to quietly cool Xboxs, Playtations, Rokus, TVs, receivers, mondems, routers, DVRs, computers, and other audio video electronics.
• Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
• Dual-ball bearings have a lifespan of 50,000 hours and allows the fans to be laid flat or stand upright
• The power adapter increases maximum fan speed and enables the fan to be powered through an AC outlet.
• 120 x 120 x 25 mm ( 4.72 x 4.72 x 1 in. ) | Rated Voltage :12V | Airflow: 92.3 ±10%CFM | Rated Current: 0.45A | Speed: 3000 RPM | Power: less than 2W at slowest speed ; 4.4 W at full speed

User questions & answers

Question:	Are the fan blades metal
Answer:	Yes, YOU CAN
Question:	Are the mounting bolts and nuts stainless or will they rust
Answer:	Yes, when the Rainbow mode is lighting, you could add it to DIY by " ADD DIY" key, then press the "DIY" key, it would be only Rainbow lighting. if it is not the Rainbow, you could press "MODE +" key to choice Rainbow lighting
Question:	Could this be placed in a duct to force air into a blacksmith forge
Answer:	I did the same with two 3 packs using only one GIM controller. I use a powered ARGB 5V 3Pin splitter hub to make sure I have enough 5V power to all my AURA SYNC components using only one addressable header on my motherboard. Works fine.
Question:	is there any wire assembly required
Answer:	Plug the GIM controller's 5V 3Pin plug into the 5V 3Pin header on your ASUS motherboard that is labeled "ADD_HEADER". Do not plug it into the header labeled "RGB_HEADER". Then press the button on the GIM remote labeled "M/B". That button will switch the ARGB sync between the motherboard AURA SYNC or the GIM controlled lighting effects. If you have multiple items to plug into the ADD_HEADER on your motherboard, you may want to use a splitter hub such as I do. You can find one on Amazon here: https://www.amazon.com/dp/B07T58RVZ7/ref=dp_prsubs_1

Product features

AC Variable speed fan

Designed to quietly cool Xboxs, Playtations, Rokus, TVs, receivers, mondems, routers, DVRs, computers, and other audio video electronics.

Fan with Filter

Protect your fingers, and keep fan blade without damage ; wear-resistant and not easy to break.

Dual Ball

Dual-ball bearings rated at up to 50,000 hours allows the fans to be mounted flat or upright.

AC 100V - 240V Power Control

Fan cable about 46 inch;

Plug ：The power plug needs to be connected to the fan cable, and then into it a wall outlet to start the fan ;

AC Power Control Connecter

Connecter: DC 5.5X2.1MM.

Description

• Package include: 1 Piece fan and mounting screws & nuts with Fan Control
• Size:120x120x25mm
• Rated Voltage: 12V
• Rated Current: 0.45A at full speed
• Power : at slowest speed, less than 0.2W ; 4.4 w at full speed
• Connecter: DC 5.5X2.1mm Female
• Speed: 3000RPM
• Air flow:92.3CFM
• Noise:37dBA

Product description

The 80mm slim fan is designed for special application spot cooling in Cooler Master chassis. These slim fans are low profile and designed to fit better in CM 690, CM 590 and CM 690 II Advanced and Basic models.

• Efficient 11-blade fan design for increased cooling at lower speeds
• 24.2 CFM Higher airflow to enhance cooling performance. Fan Life Expectancy 35,000 Hours
• Silent operation at 20 dB-A for excellent case cooling
• RoHS compliance for protecting the environment
• Recommended for CM 690 / 590 / 690 II. 3 pin Connector. 2000 R.P.M. ± 10% Speed (R.P.M.)
• Efficient 11-blade fan design for increased cooling at lower speeds
• 24.2 CFM Higher airflow to enhance cooling performance

User questions & answers

Question:	Is the 92mm size a measure of the physical plastic, so that it's 90mm from screw to screw
Answer:	No. Fan blades are plastic
Question:	I would like to use this fan to help cool a rv fridge. which two wires should I use to connect it
Answer:	no mounting hardware
Question:	what is the cfm
Answer:	Probably not forcefully enough Nicely adjustable though
Question:	what adapter do i need to connect these to my power supply? and can i connect all on the single cable
Answer:	There is only one piece of assembly required (aside from plugging in plugs) and that involves screwing in four phillips screws to attach the wire protective cover over the front of the fan.

Product features

Cooler Master Sleeve Bearing 80mm Silent Fan

Features:

• Recommended for CM 690
• 24.2 CFM Higher airflow to enhance cooling performance
• Silent operation at 20 dB-A for excellent case cooling
• Fan Dimensions (L x W x H) 80 x 80 x 15 mm / 3.2 x 3.2 x 0.6 inch
• Fan Rated Voltage 12V DC
• Fan Rated Current 0.12 A
• Fan Power Consumption 1.44 W

• ⛄CUSTOMIZING BY YOURSELF: GIM Hub would take colorful colors to your PC building, you could completely DIY your case! Including rainbow, white, purple, red, blue and all other colors!
• ⛄3 MUSIC MODES: With GIM unique music mode, your building could dance to beautiful music！
• ⛄RF WIRELESS REMOTE: A wireless control is included for convenience and easier operation. You can easily adjust fan speed (S/M/H)/ lighting effects/ brightness/ LED speed without opening the case.
• ⛄5V ARGB ADDRESSABLE: If your motherboard has RGB function, our fans could synchronize the lights of the motherboard completely! Make you enjoy the high consistency of lighting. Compatible with motherboard includes US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, etc. If not, GIM hub can bring light for you too.
• ⛄No Risk to Purchase: Any quality issue with your fans, please feel free to contact us and let us know. We will try our best to help you! GIM strives to bring the best customer service!

User questions & answers

Question:	how long is the fan cable
Answer:	The fan is PWM controlled. This means the voltage stays the same all the time but current is delivered in pulses of varying width. Longer the pulse width the faster the speed. This way the LED's stay the same brightness at all speeds and the motor is very accuratly controlled. This control comes only through the motherboard BIOS or only one other small program called Speedfan. This is the best fan I've used in 20 years of PC use.
Question:	How many addressable LEDs in each fan
Answer:	Yes,Corsair Commander Mini.I use it.I can do everything with it.If Fans can connecting with h100i v2,You can control with app.
Question:	Will this work for Asrock x570 pro motherboard
Answer:	10.8V - 13.2V
Question:	Is it an ir or rf controller? or is it wired
Answer:	All the phonies who answered this question are wrong. You only need 2 pins to power a fan, but it will only run at one speed. The third pin allows a fan controller to vary the speed of the fan using pulse width modulation via the third pin. (PWM) There's typically a transistor on the fan to facilitate this type of control. The fourth pin is a tachometer signal that emits a pulse every time the fan has rotated, which completes the feedback loop for the fan controller. A fan controller can control the speed of a 3 pin fan in an open-loop manner but it won't have information about the actual speed of the fan. With 4 pins the feedback loop is closed, so the fan controller has information about how much the fan tach changes with PWM. 4 pin control also enables broken fan detection. If you don't care about being able to monitor your fan tachs you don't need the fourth pin, a 3 pin fan will suit you fine.

Product features

Important:

1. Just a GIM hub can achieve RGB function, don't require your motherboard have ARGB function.

2. Only supports 5V ARGB, not 12V ARGB(3 pin).

3. RGB does not work, it may be because the motherboard RGB lighting mode is selected (but your motherboard does not have RGB function), please press the "M/B" key to switch to the remote control mode.

4. Please insert the red power cord correctly into the Power interface of the hub, and do not connect to the black LED strip interface.

5. If your motherboard does not have RGB function, it is not necessary to insert 5V ARGB Cable.

6. The correct way to install the screws is to twist the screws in from the outside of the case, not from the inside of the case.

Specifications:

Fan Dimension: 120mm(W) x 120mm(D) x 25mm(H)

Fan Speed: 0-1300

Rated Current: 0.35A

Noise Level: 0-15 dBA

Rated Voltage: DC 12V(fan) / 5V(LED)

Power Input: 1.92W

Lifetime: 20000 Hrs

Controller Connector: 6 PIN(for fan),2*4 PIN(for LED strip)

Package Contents:

3 x 120mm Cooling Fan

12 x Mounting Screws

1 x Hub

1 x Remote

1 x SYNC Cable

• Designed for projects that requires cooling or ventilation; or as a replacement fan for various products.
• Includes a heavy-duty aluminum fan with power plug cord, two fan guards, and mounting screw set..
• UL-certified fan with dual-ball bearings has a lifespan of 67,000 hours. Can be mounted in any direction.
• 120 x 120 x 25 mm (4.7 x 4.7 x 1 in.) | 100 to 120V AC | Airflow: 51 CFM | Noise: 30 dBA | Speed: 1800 RPM

User questions & answers

Question:	Operating temps and moisture? my application is in an external housing. 25 f - 130 f and indirect moisture. is this fan appropriate
Answer:	The size is the actual outside measurements of the housing. A 92mm fan has holes on 82.5mm centers and a 120 mm fan has holes on 105mm centers. I have a Thermaltake case with room for a 120mm fan, but the widest holes are on around 93mm centers that don't fit any readily available fan that I have found except these. My 120mm version of these has a second set of holes on the output side on about 93mm centers that work in this case. I stocked up while they are available.
Question:	Airflow direction towards or away from a modem? I've heard towards to cool it and I've heard away to draw the heat away from it
Answer:	Just remember your RV's (or car's) "12 volts" is actually higher than 12 volts. Case fans, LED lights, anything with a 12v wall-wart all take exactly 12volts. Depending on what it is, 13 to 14 volts plus might not be a problem, but to play it safe I'm using a "Buck Converter" to provide up to 3 amps of 12 volts for my LED's and a Blu-ray player. Not sure if it would be needed for these fans, my guess is they will work fine without it, but may not last as long being constantly fed higher voltages than they're rated for.
Question:	So, on average, i f the fan runs 6 hours per day, i should expect over 30 years of use (67000hours)? correct? why only a one year warranty
Answer:	Newegg lists CFM at 44.73 for the 120mm case fan. I believe it's accurate.
Question:	how many hours of use is it rated for
Answer:	I purchased the 140 mm, though I would assume they should be the same. the fans themselves are 3 pin if you are going to attach them directly to your motherboard but they also come with 3 pin to molex adapters (which I used) in order to connect them directly to the power supply. I was able to attach two fans in series to one of my power supplies molex strips.

Product features

Heavy-Duty Fans

Each fan is constructed of die-cast aluminum and suitable for various environments. Thermoplastic impeller meets UL 94 flammability standards.

Dual-Ball Motors

Dual-ball bearings rated at up to 67,000 hours allows the fans to be mounted flat or upright. Impedance protected motors have a high resistance to heat.

Quality Approved

The axial fan is UL recognized under certificate E503903 by Underwriter Laboratories. Verifiable through UL Online Certifications Directory.

Plug and Play

All fans run at 100 to 125V AC and include a power cord. Just plug it into a wall outlet to start the fan. Includes dual fan guards and screw set.

Product description

Advanced series 120mm x120mm long life bearing performance fan

• special high profile fan blades for maximum air flow
• provides excellent ventilation for pc cases
• design for up to 100,000 hours life expectancy
• high performance
• high reliability
• 3pin/4pin connector
• Compatible devices: Desktop

User questions & answers

Question:	Does it come with screws to screw into the case
Answer:	Using it to circulate air in a hydroponic enclosure for lettuce and microgreens. High humidity, although temps are usually below 100F. Working well.
Question:	Does the led stay on 24/7 as long as the pc is on? what about in sleep mode
Answer:	would suggest pull heat away. consider; in which direction does car radiator fan blow? toward engine or away? Or when cooling hot soup, do you blow on it to blow away heat? or suck in heat? Different from fan blowing on skin. metal has feeling like skin.
Question:	Max amps
Answer:	It will run for 30 years. I bought mine back in 1990. Use it to cool a stereo component system that is on 24/7. Has operated continously since them great little unit.
Question:	Has anyone tried using this for teh top exhaust on a Corsair 600t case
Answer:	Hello, This fan is rated for 67,000 hours of normal use. Thank you for your question. Kind regards, Andrew Avila AC Infinity

Product features

FEATURES

• Model: CF-012LB
• 120 x 120 x 25 mm long life bearing case fan
• Special high profile fan blades for maximum air flow
• Provide excellent ventilation for your PC cases
• Design for up to 100,000 hrs life expectancy
• High performance
• High reliability
• 3 Pin/4 Pin Connector

3 Pin/4 Pin Connector

Choose from either 3 pin connector to your motherboard or 4 pin connector with your power supply.

High Performance

Optimized and enhanced static pressure for better cooling performance. Designed for up to 100,000 hrs life expectancy.

High Profile Fan Blades

Maximum Air Flow (40 CFM) to cool off the air inside your case, the 7 blade design, balance air volume, and wind pressure provide you strong heat dissipation.

• Trusted Premium Brand : 18-month manufacturer's warranty and Professional Customer Service Assistance.
• Silent Case Fan：The impeller was designed with a focus on minimzing the noise level (21.5 dBA) yet delivering the superior airflow (30.5 CFM) and pressure (0.65 mmH2O)
• Highly Efficient Ventilation : The destinctive design on the back end of the fan blades providing highly efficient ventilation (1000 RPM)
• High Quality Fan Blade :Designed with 7 blades to provide high airflow (30.5CFM), good cooling capacity.
• Package：（1）PF 120mm Case Fans *5；（2）1 to 3 Fan Splitter *2；（3）Screw *20

User questions & answers

Question:	Which way do these fans blow
Answer:	Approximately 54 CFM.
Question:	How does this fan differ from the ones posted with a cfm of 50.78 and a static pressure of 1.96mmH
Answer:	yes they are 12 volt fans.
Question:	Does anyone know the size of the screw
Answer:	I did use this fan to replace the EVO 212 stock fan. This fan is pretty close to inaudible at 1000 RPM (goes up to 1500). But the fan does not move as much air as the stock fan. Idle temps are up 2 degrees C, load temps are up almost 10 degrees C. If your rig is already running hot, this is not the right fan for you.
Question:	Are these 24 volt
Answer:	The NF-F12 is a high static pressure fan designed to push airflow against substantial resistance, as with a water-cooling radiator or a heatsink. For a case fan, you're better off with the NF-S12A -- it's both quieter and moves a greater volume of air.
Question:	How much air does this push in CFM
Answer:	This does not come with fan hub. Each fan has a molex connector and 3pin motherboard connector. You can daisy chain with molex connectors
Question:	Just confirming these are 12 volts. Using for a different application
Answer:	Yes, you should have no problem connecting the 4-pin Molex peripheral connectors on each fan to each other. There is both a male and a female end that you can use to daisy chain them together.
Question:	Can I use this to replace EVO 212's stock fan (a Cooler Master 120mm which rattled from day one), facing downwards, clipped to the heatsink? Thx
Answer:	Sleeve bearing fans!
Question:	Would this be a better case fan then the NF-S12A PWM? I want to mount a fan on my case to blow air on my HDDs
Answer:	Yes, all our fans come with screws.

Product features

Heptaperf Impeller

Custom designed for the new Focused Flow frame and to work in tandem with the eleven stator guide vanes, the NF-F12's seven blade Heptaperf impeller has been carefully optimised to achieve a perfect balance between power and quietness.

SSO2 bearing

The NF-F12 is the first fan to feature the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.

Varying Angular Distance and Vortex Control Notches

The NF-F12's stator guide vanes are set out in Varying Angular Distance and feature Vortex-Control Notches. Both measures help to spread the noise emission over a broader frequency spectrum and thus make the fan's sound pattern more agreeable to the human ear.

Scope of Delivery

• Low-Noise Adapter (L.N.A.)
• 4-Pin Y-Cable
• 30cm Extension Cable
• 4 Vibration-Compensators
• 4 Fan Screws

• Ultra-quiet UL-certified USB fans designed to cool various electronics and components.
• Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
• Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
• USB plug can power the fan through USB ports found behind popular AV electronics and game consoles.
• Dimensions: 3.2 x 3.2 x 1 in. per fan | Total Airflow: 52 CFM | Total Noise: 18 dBA | Bearings: Dual Ball

User questions & answers

Question:	How long is the usb cable
Answer:	the one I ordered did not
Question:	Since linking addition fans would have the same USB plug, how are you going to connect identical connections together
Answer:	Yes, the LED stays on as long as the PC is on. If there is still power the LED will also stay on. Any questions or concerns please contact us at [email protected]. Thank you.
Question:	Will the ac infinity turbo fan power adapter, for multifan series usb fans. work for these fans its 6v 2000ma
Answer:	Under 5watts, so, 0.2amps or so. Can't tell you startup spike, but, its low power. My meter can't detect under 1amp accurately :(
Question:	What is the maximim distance between the two fans
Answer:	Yes it does. I have the 600t in white, this fan fits perfectly to replace the top exhaust fan. In terms of replacing the front intake fan it works but not like the oem fan due to the screw holes being on the side they are on. All you need to make it work are longer screws that can reach the screw holes on the fan.

Product features

Multi-Speed Controller

Inline switch enables you to optimize fan speed for various applications. Can be powered through USB ports found behind AV electronics and consoles.

Ultra-Quiet Fans

Designed to maximize airflow CFM to noise dBA ratio. Dual-ball bearings rated at 67,000 hours allows the fans to be laid flat or stand upright.

Quality Approved

Contains UL recognized axial fans under #E503903 in 2018 by Underwriter Laboratories. Archived in UL Online Certifications Directory.

Silicone Rubber Feet

Absorbs noise and surface friction caused by fan vibrations. Unused pieces can be detached to reduce overall height for tight spaces.

• 【Intelligent Speed Control-Upgradeable to 4-in-1 kit】 3 ×120mm full function PWM fans. The intelligent temperature control mute module controls the speed at 1000~1800±10% RPM. Please order a single supplement fan in the variant if you want to upgrade this to 4 pack.
• 【Dual Light Loop Design】Addressable RGB LEDs can be controlled - 10 lighting modes / 6 different colors / Multiple RGB light speeds and provide colorful streamer lighting effects.
• 【Shockproof Design】8 silicone shockproof pads ensure that the fan will not vibrate when it is running.
• 【Top Bearing Technology】Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency. Lifetime 30,000 Hrs.
• 【Wide Compatibility】5v 3pin RGB lights connector, 4 pin PWM power connector. The fan is 12v, the RGB is 5v, please connect to the 5v 3 pin motherboard header. Suitable for water cooling and support 120/240/360mm radiators. (CPU Cooler/Computer Case/GPU etc)

Product features

One of Top Leader in Case Fans

PC-3M120 Moonlight Series uses ARGB dual light loop design, provides powerful color variations and mute effects to make your computer case unique.

3 x 120MM Full Function PWM Fans

The intelligent temperature controls the speed at 1000~1800±10% RPM, so the fan speed can be controlled and keep fans quiet.

Extreme cooling to keep your game running smoothly and extend your computer life.

SilentPro 9 Fan Blades

9 fan blades and the surface airflow guide groove is used to process a large amount of air and concentrate the wind on the leading edge of the blade for higher wind pressure and quieter.

Hydraulic Bearing Technology

Hydraulic bearing with longer service life to reduce noise/oil overflow and improve heat dissipation efficiency. Life expectancy can exceed 30,000 hours.

Double-sided Silicone

The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads which can make the internal operation of the computer case stably and reduce the noise output.

PCCOOLER: One of Top Leader in Case Fans

Full Function PWM Fan

PC-3M120 RGB LED computer case fans including 3 × 120mm full function PWM addressable fans. The intelligent temperature control mute module controls the speed at 1000~1800±10% RPM.

Suitable for Water / Liquid Cooling

Support 120/240/360mm radiators and Motherboard ARGB (+5V/3Pin).

Motherboard software synchronization mode to build your own lighting control system. The fan cable is 60cm long, compatible with most computer case and suitable for gamers.

These PWM pc cooling fans support ASUS, Gigabyte, MSI main software synchronization control. Connect standard 3pin-4position ARGB female connector to motherboard's 3pin-4position ARGB port.

Package Contents:

3 x 120mm Corona PWM Fans

12 x Fan Screws

1 x Install Instruction

1 x ARGB Controller

1 x 1-To-3 Fan Strip Cable

1 x 1-To-4 RGB Bifurcate Cable

1 x Gigabyte VDG Adaptor Cable

• Higher air flow to enhance cooling performance
• Economic solution for perfect performance
• RoHS compliance for protecting the environment
• 3 IN 1 Value Pack
• Ultra silent operation at 19 dBA

User questions & answers

Question:	I bought these to put in my RV refrigerator, does anyone know which wire is which
Answer:	Hi Quentin!Thank you for your inquiry.The overall length of the power cord would be 72 inches (6 feet). The cord between fans would be roughly 30 inches (2.5 feet).We greatly appreciate your interest and consideration in regards to our cooling products!Warm Regards,Tommy KaragiasAC Infinity
Question:	What are the overall dimensions of each entire component, including thickness/depth? i.e. 120mm+ x 120mm+ x 25mm
Answer:	Hi T. Campbell!Thank you for your inquiry.Each fan contains a USB female and male connector, which would be the essential tools to "daisy chain", or connect additional fans into the mix.You will be able to connect the male into the female ends to allow you to operate the units in series.With the use of the thermal controller you can operate up to six individual fans in sync with one another.We greatly appreciate you taking the time to contact us directly!Warm Regards,Tommy KaragiasAC Infinity
Question:	Can you use the smart fan setting where at a certain temperature the fans automatically adjust to the speed using the bios
Answer:	From the power supply page, the fans will work. Compatibility Designed for MULTIFAN models S1, S2, S3, S4, S5, and S7. AC Infinity AIRPLATE cabinet fans include a turbo wall adapter but can be purchased for replacement purposes. Not compatible with any other USB fans or electronics.
Question:	My fans light up as dots only on the rim. Occasionally it lights up all the way and then fade back out. Any fix
Answer:	The distance between the two fans is now 2.5 feet. This applies to fans ordered after Jan 1, 2015.

Product features

Product description

• Product Size: 120 * 120 * 25mm
• Pitch: 10.5cm
• Rated voltage: 12V
• Current: 0.12A
• Input power: 1.44W
• Speed: 1200RPM (constant speed)
• Air volume: 38CFM
• Static pressure: 58Pa
• Noise: 19DB
• Weight: 130g

Product description

MasterFan MF120 Halo a new series to the MasterFan family providing air cooling solution for CPU liquid radiator and chassis in-take With its Duo-Ring Addressable RGB Lighting sporting 24 Individually Controlled ARGB LEDs for the most stunning visual effect on any gaming rig MF120 Halo are fitted with multiple layers of our exclusive noise reduction technologies and sound-absorbing materials for a perfect blend to cool your entire system and its components in silence Hybrid Fan Blade Design combing an Air Balance with a Wave Shape fan blade design for a Static Pressure airflow to tackle heightened impedance and resistance in CPU liquid radiator low-noise or mesh chassis ventilation while boosting overall airflow.

• Duo-Ring Addressable RGB Lighting 24 Individually Controlled ARGB LEDs for a stunning visual effect
• Performance Engineered Hybrid Static Pressure blade design to tackle resistances in CPU liquid radiator, low-noise or mesh chassis ventilation while boosting overall airflow
• Silent Cooling Technology Noise Reduction Technology and Sound Absorbing Materials for a quieter and longer lifespan cooling solution
• PWM Fan Controly, Dynamic speed adjustment between 650 rpm to 1 800 rpm minimizing noise or maximizing air flow
• Certified Compatibility Compatible with most of Addressable RGB capable motherboards Aura Mystic Light and Polychome Sync
• Wired ARGB controller Color can be adjusted with just a touch of a button without the need for software
• Included 3 MF120 Halo 120mm fans, plus Wired ARGB controller

User questions & answers

Question:	Please clarify each fan cable distinctly; are the digital argb cables 3-pin and are the pwm power cables 4-pin
Answer:	Google seach 3 pin fan wire diagram thatll give you the answer
Question:	Me gustaría saver si trae el juego de cables para conectarlos todos a una sola coneccion de corriente y rgb
Answer:	Thank you for your inquiry, the overall size of each product is 120mm*120mm*25mm.
Question:	How are the mounting holes on the 200mm fans laid out? will they fit in cases with one screw per corner
Answer:	You can if you plug the fans into a header on the motherboard that controls fan speed, however, the LEDs will follow the power applied to the fan, so if the motherboard commands the fan to slow, the LEDs will be dimmer or not light at all.
Question:	I know it is certified for "asus aura, msi" but can it work with gigabyte rgb fusion
Answer:	Voltage from the pin connector on the mobo, some times you can adjust the fan speed in the the bios to get them to say brighter, or use a fan controller, or hook them up to directly to the psu

Product features

MasterFan MF120 Halo 3n1

MasterFan MF120 Halo, providing air cooling solution for radiators and case intake. Duo-Ring Addressable RGB Lighting sports 24 Individually Controlled ARGB LEDs for the most stunning visual effect.

Fitted with multiple layers of our exclusive noise reduction technologies and sound-absorbing materials for a blend of cooling and silence. Hybrid Fan Blade Design combines an Air Balance with a Wave Shape fan blade for a Static Pressure airflow to tackle heightened impedance and resistance.

Secure Connection

No more worrying about loose connections. The clip secures both ends in place for easier cable management.

PWM Fan Control

Dynamically adjust the speed between 650 RPM to 1,800 RPM, minimizing noise or maximizing airflow.

ARGB Header Extender

The extended ARGB 3 pin plug is also a daisy chain connector for multiple ARGB devices even if your motherboard only has one ARGB header.

Product description

The Corsair iCUE SP120 RGB PRO performance fan features eight individually addressable RGB LEDs lining the fan hub, for the cooling you need and the visuals to impress. Pair with an existing SP120 RGB PRO triple fan kit or a Corsair iCUE RGB lighting controller such as the lighting Node Pro (sold separately) to customize and synchronize your lighting with brilliant patterns and effects using Corsair iCUE software. The translucent 120mm fan blade, spinning up to 1, 400 RPM and pushing up to 52 CFM of air, provides high airflow and static pressure without distracting from your spectacular lighting effects. Tech Support # 1-888-222-4346 opt #1

• Complete your Corsair SP RGB pro-cooled system with an additional fan, equipped with eight individually addressable RGB LEDs around the hub.
• Create dazzling lighting patterns and effects with powerful Corsair iCUE software, bringing your system to life with dynamic RGB lighting synchronized across all your iCUE compatible products. Requires a Corsair iCUE RGB lighting controller, sold separately.
• Keep your system cool with powerful fan speeds up to 1, 400 RPM, pushing up to 52 CFM of air.
• A translucent 120mm fan blade provides high airflow and static pressure while letting your RGB lighting shine through.

User questions & answers

Question:	My motherboard has two usb 3.0 slots and they are taken up by my case. Is the 3.0 cable needed if I’m connected to a sata cable
Answer:	ARGB is standard 3 pin [00_0] the RGB (non-addressable) option is 4 pin [0000] PWM is 4 pin
Question:	If I buy three single packs and connect them to my corsair case that already has fans with a hub, will it all work if I connect them
Answer:	Trae el splitter para conectar el pwm de 3 a 1, y el rgb se conectan uno con el otro, y podes conectar al final a la mb o al controlador
Question:	How do I know what size fan I need
Answer:	No you don’t need to use all 8 holes
Question:	Can these work with fan splitters
Answer:	They will work with fusion if the motherboard you have has a compatible ARGB header. CM-PNguyen

Product features

CHILL OUT IN STYLE

Complete your CORSAIR SP RGB PRO-cooled system with an additional fan, equipped with eight LEDs around the hub. A translucent 120mm fan blade provides high airflow and static pressure while letting your RGB lighting shine through.

INTELLIGENT CONTROL, UNLIMITED POSSIBILITIES

Create dazzling lighting patterns and effects with powerful CORSAIR iCUE software, bringing your system to life with dynamic RGB lighting synchronized across all your iCUE compatible products. Requires a CORSAIR iCUE RGB lighting controller, sold separately.

KEEP YOUR SYSTEM COOL

SP RGB PRO fans offer more than just great looks – cool down your components with powerful fan speeds up to 1,400 RPM, pushing up to 52 CFM of air.

INTELLIGENT CONTROL. UNLIMITED POSSIBILITIES.

CORSAIR iCUE software brings your system to life with dynamic RGB lighting synchronized across all your iCUE compatible products, including fans, RGB LED light strips, keyboards, mice and more.

• [ COOL RGB LIGHT ]: Enjoy the beautiful RGB effect and nice heat dissipation effect by GIM RGB case fans, bring you cool gaming experience.
• [ SILENT & EFFICIENT ]: Feature hydraulic Bearing self lubricates with a friction-reducing substance for quiet operation without sacrificing performance.
• [ MULTIPLE MODES ]: RF Wireless remote RGB fan controller, One key to adjust color change speed, mode, and color.
• [ EASY to INSTALL ]: Plug into the interface in order of 1-3 for them.
• [ WORRY-FREE PURCHASE ]: Our fans supply a money-back and free replacement in 30 days, If you have any problems, contact us for a free replacement, without having to return your original. Don't delay, get yours today!

User questions & answers

Question:	poder de fujo de aire cfm
Answer:	Yes, the software communicates with the fans via the USB 3.0 header. You can buy a USB 3.0 header splitter for less then $10 to have a spare header available.
Question:	What is the "aura 5v" outlet for on the hub
Answer:	Corsair Commander Pro, you need this for the rgb hub to work. Plus you will be able to control fan speed, lights from the software iCue
Question:	fan connections are 6 pin, are there wire extentions, searching i find only 4 pin
Answer:	Depends on the use. For a radiator, 240=2x120mm fan. For a case fan, check the owners manual or measure it. 120mm is a fairly average size for case fans.
Question:	Do the lights shut off when you turn the computer off or do you have to turn the lights off with the remote manually
Answer:	yes they will work with fan splitters