12 best bitfenix fan controllers

Product description

Whether you are looking for performance or just in a quality product, it set for controlling fan Bitfenix specter Pro RGB ink rgb-controller

• Cooling System
• Specific product, designed for demanding
• Materials to the gaming or water-cooling. Designed to accommodate a maximum of need.

Product description

Bitfenix Recon BFA-RCN-KS-RP Fan Controller w/ Internet Connection (Black)

• Internet Connected for Mobile Devices
• Touchscreen Controls
• Dual Processor Technology
• System Status Monitoring
• Five Channel Thermal Control
• Customizable Profiles
• BitFenix Soft ouch Bezel

User questions & answers

Question:	What's the warrenty on this
Answer:	You have the manufacturing warranty only. One year.
Question:	If i use the 1-to-2 sleeved pwm fan splitter cable, can i connect 6 (or more) fans? i know i won't be able to controll them separately,but can i?thnks
Answer:	Yes, if you use a splitter you can control more than one fan per control circuit - but be careful not to exceed the maximum allowed amperage draw
Question:	Are the blue LED's brighter than the picture, or are they really that dull blue
Answer:	They're not blue at all... They are actually white.I wouldn't trust these controllers. I have 2 and both change from auto to manual controls at random.
Question:	are you able to switch fans off with this and is it possible to run 2 of these in the same build
Answer:	Yes you can run two of these in the same build as long as you have (2) 5.25 bays available and with 2 of them you can control and monitor temp. for up to 10 fans.To be able to turn fans off with the Bitfenix Recon you will have to run it on manual mode, that will allow you to reduce increase or cut off power to a particular fan, but a rheostat controller will do this easier. I am running 2 controllers in my case, one is the Recon which I usually leave on Auto to run 5 main fans in my case, and then I have the Akasa FC.Trio 3 Channel Fan Controller -(AK-FC-07BK) as the second one which allows me to easily adjust power to 3 additional hi RPM fans with up to 30 watts per channel as needed with the rheostats. The Recon has a max. of 10 watts per channel, (which is usually enough for most fans). The Akasa also has a nice display.

• 4 X Addressable RGB Fans and 6+6 Controller Pre-Installed
• Dual Protection Design As Air Purifier
• See-through-tinted 4mm Tempered Glass Side Panel
• Removable Modular Hard Drive Cage
• 4 Color Options for your style

User questions & answers

Question:	How do i change color of fans? And how do i get them to sync to mobo? I have alresdy connected them to proper header on mobo
Answer:	There is a fan controller box in the case where you hide the wires. You can control the color with the button on the top of the case. Unfortunately I still can’t sync with motherboard. I think it’s because it uses aura sync and asus updated the app to something else.
Question:	my motherboard has a 12v argb, what splitter do i need for all 4 fans i tried looking up "One 12v to Four 5v splitter" i need help
Answer:	The fans pre-installed are 3 pin 5V ARGB LED fans. The fans can't be connected to 4 pin 12V RGB LED connector on motherboard as different voltage connected together may get burned. But the case comes with controller, you can use the controller on the case to control the ARGB LED light effect
Question:	Can you remove the inner dust filter on the front panel
Answer:	no you can't but the front panel is easy to be removed and clean with the filter
Question:	what are the dimension of the case
Answer:	The dimension is 380mm(W)x 211mm(H) x 450mm (D)

Product features

Nova Mesh SE TG, Special Edition of Nova Mesh TG, inheriting the core values of Nova Mesh TG

NOVA MESH SE TG presents not only BitFenix’s long standing aesthetics theme of simple elegance, but also the dedication towards offering a well-rounded PC chassis.

This SE version comes with four color options to match with your style,

Black body with Black mesh, Black body with Red mesh, White body with White mesh and White body with Purple mesh.

Front Panel

Magnetic Dust Filter on the Top

PSU Dust Filter

• 4 x 4 pin 12V RGB Fans Pre-Installed
• Slots for 3x 120 mm- or 2x 140 mm fans in the front and 2x 120 in the roof
• Dust Filter at Front and Top Magnets PSU Dust Filter
• Tinted, tempered glass side, motherboards up to a E-ATX form factor
• Support VGA Length up to 340mm Space for 240 mm radiator in roof and up to 280/360 radiator in front

User questions & answers

Question:	I have the fans plugged into the fan headers on an msi x570 board. they light up, but dont spin . any ideas
Answer:	This case comes with 4 x 12V 4 pin RGB fans. There are 2 cables of each fan. One is used to daisy chain the fan for power, the other one is to daisy chain the fan for RGB LED...the daisy chain fans for power, the cable of last fan for power shall be connected to the fan header on motherboard, the daisy chain fans for RGB LED, the cable for RGB LED of last fan shall be connected to 4 pin RGB LED connector on the motherboard. If you still have questions, please kindly issue a support ticket on BitFenix website and we will send you full details with manual....we're also working on getting the details how to daisy chain the fans and connected to motherboard on BitFenix website soon
Question:	Where are the ssd slots
Answer:	At the back of motherboard tray, you can install 1. Under the PSU Shroud, there are HDD/SSD cage/tray that you can install 3. At the front side of motherboard try, you can install another 2.
Question:	How to setup the fans
Answer:	There are 2 cables coming with the fans...one cable is for power, one cable is for RGB LED...the cable for power coming with 4 pin header that's connecting to the fan header on motherboard as non led fan, on the same cable, there is another connector to daisy chain the fans....the other cable is for RGB LED that you connect to the 4 pin RGB LED header on motherboard, on the same cable there is also connector to daisy chain the fans for RGB LED...for more details, please go to BitFenix website and check the product page of Spectre RGB LED fan and click on the banner of AURA SYNC clinic or issue a support ticket on bitfenix website and we will provide you with more details
Question:	Hi i just bought this product my motherboard doesnt have an rgb 12v controller what would you suggest
Answer:	The controller comes with Alchemy 2.0 RGB LED strips can also control the pre-installed fans in this case..., you can also daisy chained the fans with the LED strips...please look for these 2 models: BFA-RGB-30MK15C-RP (Alchemy 2.0 RGB LED strip 30cm with controller), BFA-RGB-60MK30C-RP (Alchemy 2.0 RGB LED strip 30cm with controller)..if you still have further question, please issue a support ticket on BitFenix website and BitFenix Support Team will assist you with all details

Product features

4 X Spectre RGB (4 pin 12V) Fans Pre-installed Support AURA SYNC, MISTIC LIGHT SYNC, RGB Fusion and POLYCHROME RGB

For how to daisy chained the 4 pre-installed Spectre RGB (4 pin 12V) fans and connect to motherboard with 4 pin 12V RGB LED connector, please check BitFenix Youtube Channel

4 X Spectre RGB (4 pin 12V) Fans Pre-installed Support AURA SYNC, MISTIC LIGHT SYNC, RGB Fusion and POLYCHROME RGB

For how to daisy chained the 4 pre-installed Spectre RGB (4 pin 12V) fans and connect to motherboard with 4 pin 12V RGB LED connector, please check BitFenix Youtube Channel

4 X Spectre RGB (4 pin 12V) Fans Pre-installed Support AURA SYNC, MISTIC LIGHT SYNC, RGB Fusion and POLYCHROME RGB

For how to daisy chained the 4 pre-installed Spectre RGB (4 pin 12V) fans and connect to motherboard with 4 pin 12V RGB LED connector, please check BitFenix Youtube Channel

Black and White

Functional Design

The high density mesh used in the NOVA MESH TG has over ten thousand holes for easy airflow and dust filtering with magnetic removable function for easy removal. The clean interior design not only makes sure unrestricted airflow but also focused airflow to the GPUs for effective cooling performance.

Clean Interior With See-through-tinted 4mm Tempered Glass Side Panel

• Tempered Glass Side Panels: High quality temper glass side panel that allows this gaming ATX case have a peek into today??s illuminated components like RGB fans and RGB strips
• Addressable RGB illumination: It comes with addressable RGB illumination surrounding the metallic front. Additionally, a pre-installed controller.
• Silence engineering: The clean interior design of this Chassis creates no interference to the air flow blowing straight on GPU that helps not only to cool down the GPU also reduces the noise level.
• Clean Interior With Excellent Cable Management: This ATX Chassis has 23mm cable management space behind motherboard tray makes it an easy job to manage the cables clean.
• Easy Clean With Side-way Removable Dust Filters: To keep the interior of the this gaming case dust-free, multiple filters are placed around the case.

User questions & answers

Question:	What size GPU does this support
Answer:	up to 340mm long
Question:	Can a Cyrorig R1 Ultimate fit in this case
Answer:	Yeah, you should have no problem fitting a Cryorig R1 Ultimate in there
Question:	Can you do water cooling in this case
Answer:	I did a thermalake water 3.0 dual riing
Question:	is there an dvd drive
Answer:	unfortunately there is no slot for a disk drive

Product features

Sleek Design With Metallic Front & Addressable RGB illumination Compatible with Major Motherboard Brands

The addressable RGB illumination are compatible with major motherboard brands: Asus AURA SYNC, MSI Mystic Light, Gigabyte RGB Fusion 2.0 and Asrock Polychrome SYNC.

The pre-installed Spectre 4 pin 12V RGB LED fan at the rear is also compatible with Asus AURA SYNC, MSI Mystic Light, Gigabyte RGB Fusion 2.0 and Asrock Polychrome SYNC.

Sleek Design With Metallic Front & Addressable RGB illumination Compatible with Major Motherboard Brands

The clean design concept of Enso presents is well balanced between a perfectly organized interior structure and a sleek exterior design. It is complemented by a 4mm see-through-tinted tempered glass panel on the side and addressable RGB illumination surrounding the metallic front.

Built in ARGB/RGB LED Controller

Users can choose to control Addressable RGB LED illumination at the front and the pre-installed Spectre 4 pin 12V RGB LED fan at the rear on Enso by motherboards equipped with 3pin ARGB LED connector and 4pin RGB LED connector or just use the built in controller on Enso case to control the ARGB effect on metallic front and pre-installed Spectre RGB fan at the rear

Spectacular Enso ARGB/RGB Illumination with BitFenix ARGB/RGB Accessories

All BitFenix ARGB/RGB accessories are designed not only with high qualities and the compatibility with AURA SYNC, Mystic Light, RGB Fusion 2.0 and Polychrome SYNC or the built in ARGB/RGB LED controller on Enso case. More details of how to daisy chained BitFenix ARGB/RGB accessories can be found on BitFenix website

Easy Clean With Side-way Removable Dust Filters

To keep the interior of the ENSO dust-free, multiple filters are placed around the case. The top filter is attached via magnets and can be easily slid off to clean it. The ENSO also features BitFenix’ new sideway-removable filters in the front and the bottom, thus enabling users to remove the front and PSU filter easily without lifting or moving the case.

Attached With Both Solid And Mesh Magnetic Top Cover

Enso case comes with both solid and mesh magnetic top covers. The solid top cover prevents dust and keep the clean look while the mesh top cover maximizes the top air flow outtake.

Capability

• Support E-ATX Motherboard Up To 272 mm
• Support Graphic Card Up To 340 mm
• Support Power Supply Up To 160 mm

Capability

• Support CPU Cooler With Height Up To 160 mm
• Clean Interior With 23 mm Cable Management Space Behind Motherboard Tray

Thermal Capability

• Pre-installed Fans(Front)1 x 120mm Spectre All Black Fan
• Pre-installed Fan(Rear)1 x 120mm Spectre RGB Fan (+12V 4Pin RGB)
• Radiator Support(Front)240mm x 1/ 280mm x 1/ 360mm x 1(Thickness up to 45mm/ width up to 160mm)
• Radiator Support(Top)240mm x 1 (with height of the memory up to 40 mm)
• Radiator Support(Rear)1 x 120mm

• Customizable ARGB LED Lighting:With 8pcs of independently programmable ARGB LED lights, provides full lighting for your build, achieving magical lighting effects.
• Optimized Cooling Performance:Balanced airflow and air pressure designed for perfect compatibility with your case or cooler.
• Blade Design:The unique blade configuration offers a powerful air pressure.Scientific air channel design in the frame reduces noise caused by airflow turbulence.
• Long Service Life:Wear resistant hydraulic bearing construction makes the fan run noiseless and the air aolume larger with an astounding service life of more than 40,000 hours.
• Synchronizable ARGB lighting via motherboard: Sync ready with all 5V 3PIN ARGB motherboard including Gigabytes, Asus, MSI, and Asrock.What You Get: T3SYC3-6 SYNC RGB Case Fan, our worry-free 12-month warranty and friendly customer service.

User questions & answers

Question:	what if my pc case doesnt have a reset button
Answer:	It doesn’t actually require a reset button. It comes with one that you can mount in your case. Unfortunately, if you don’t have a case that supports a 3rd party reset button, it just kinda hangs around freely and is a bit of an eye-sore.
Question:	How do you power these fans? the controller is 3 pin male molex connector and it says that i need to connect it to the power supply. do i need a cable
Answer:	It uses a Y cable to power the controller, one end goes to your 3 pin 5v rbg connector on your mb and the other end goes to your fan heater also on your mb no further cables needed
Question:	Is there a rainbow wave effect built into the controller
Answer:	If you’re thinking of a rainbow wave where the colors go from one fan to another in sequence, then no, but it does have a color cycle option. However, if you have a compatible motherboard and RGB control software, you can set it up through that.
Question:	I've connected the fans to the connector huband made sure i plugged it into the correct spot. rgb fusion still won't detect my fans. how do i fix this
Answer:	It has nothing to do with setting the MB header to 5v. I’m not even sure that's possible. Buried deep in the directions in small print, it tells you to hold the reset button for 3-seconds after power on to sync to the MB. before that, it may very well look like these fans just do not work as advertised. I missed that at first and was extremely disappointed, but once I figured this out, everything works as it should.

Product features

Two-way Control

• T3SYC3-6 Support motherboard control and RESET button control.It can be easily controlled by Motherborad through 5V ADD-RGB Header and they can synchronize with other ADD-RGB devices.
• upHere T3 RGB series requires tither 5V 3PIN"ARGB header"on motherboard to enable ARGB lighting.It is compatible with most 5V 3PIN ARGB capable motherboards.

Create a Symphony of Color

• Lighting With 8 ultra-bright ARGB LED lights, provides full lighting for your build, achieving magical lighting effects with multiple-choice controls and multiple different modes of breathing, static, and multi-color cycling.

Optimized Cooling Performance：

1. Balanced airflow and air pressure designed for perfect compatibility with your case or cooler.
2. Strong air flow to fortify cooling efficiency.
3. Long life sleeve bearing for longer life expectancy.
4. Silent operation as an excellent choice for case cooling.

Hydraulic Bearing with Low-Noise Design

1. Long life sleeve bearing for longer life expectancy.
2. The hydraulic bearing self-lubricates with a high-quality, friction-reducing substance, which lowers operation noise while improving thermal efficiency. The seal cap prevents lubricant leakage and extends the lifespan of the unit.

Contents and Specifications

Product description

The Corsair Commander Pro grants superior and accurate hardware control with a compact, all-in-one device. It is fully compatible with Corsair link devices and supports up to six fan connectors, two internal USB 2.0 headers, four temperature inputs, and two RGB LED channels. Accurately monitor how your system reacts when you push it to its limits. Manage your fans without pressing knobs or switches through the intuitive Corsair link software. Synchronize your RGB lighting effects with the HD RGB fans, SP RGB fans and individually addressable RGB LED strips to light up your build.

• The Corsair iCUE Commander PRO turns your case into a smart case, using Corsair iCUE software to control up to six case fans and two RGB lighting channels
• Powers up to six DC or PWM fans with voltage and PWM control, including the ability to run at zero RPM for total silence
• Two RGB lighting channels provide powerful software control of Corsair individually addressable RGB LED strips and Corsair RGB fans
• Four repositionable temperature sensors allow you to accurately monitor temperatures throughout your system with Corsair iCUE software
• Two USB 2.0 internal headers allow you to easily connect internal USB devices, such as a Corsair AXi Series PSU or motherboard front panel
• Set up custom fan curves and lighting profiles to automatically adjust fan speeds and RGB lighting based on system temperatures
• Powerful Corsair iCUE software brings everything together, allowing you to customize RGB lighting, monitor CPU and coolant temperatures and adjust fan speeds, all from a single intuitive interface
• Commander PRO’s low profile design and included adhesive backing makes it easy to install behind your motherboard, or on any flat surface inside your case

User questions & answers

Question:	Can I control 6 fans rgb color and 6 fan controls such as rpm’s
Answer:	It plugs into both. It uses a sata connector for power and a motherboard fan header for speed control. The motherboard connection is not required if you use the remote speed control device.
Question:	Will this be able to control 3 hd120s and 3 sp120s
Answer:	No, power comes from computer power supply. I just looked at the box and spare manual switch. You could rewire a external power supply to work, but then you would have a expensive extension cord with many tiny fan plugs.
Question:	I'm really confused... do i even need the lighting node thing to control the lighting effects for the fans and led strips and link them up
Answer:	You can plug 3pin fans into the 4pin headers but as far as I can tell any 3pin fans in 4pin headers run at full speed. The only 3pin fan that able to be controlled by motherboard or remote was in Fan1 header for variable speeds. I am not sure the 4pin headers can be voltage control like on a motherboard except in Fan1 header with a 3pin fan. Fan1 header appears to work just like the motherboard header able to be PWM or Voltage controlled. All 3pin headers in the fan controller were able to be voltage control to match Fan1 header speed connected with either a 3pin or 4pin fan.
Question:	So i assume corsair wouldn't be nice enough to include an LED strip with the commander pro
Answer:	Yes, which ever fan, 4 pin or 3 pin is plugged into Fan1 header will report back to the motherboard its RPM. You have to connect the Motherboard Cable into Input and motherboard fan header. Do not use the Manual Remote if you want to see RPM. Manual Remote only lets you select 3 speeds and bypasses motherboard all together.

Product features

TURN YOUR CASE INTO A SMART CASE

The CORSAIR Commander PRO gives you unparalleled control over your system’s performance and RGB lighting. Get in-depth insight into your system temperatures in real-time and set up intelligent fan curves to automatically adjust speeds based on your system’s demands.

CONNECT. COMMAND. CONTROL.

The CORSAIR Commander PRO controls up to six case fans and two RGB lighting channels, with four repositionable temperature sensors and two USB 2.0 internal headers.

PRECISE FAN CONTROL

Controls up to 6x 3-pin DC or 4-pin PWM fans, including the ability to run in a Zero-RPM fan mode for total silence.

STUNNING RGB LIGHTING FOR YOUR PC

Two RGB lighting channels combined with powerful CORSAIR iCUE software complete customization of individually addressable RGB LED strips and CORSAIR RGB fans.

• 🌈Cool RGB Light: GIM RGB case fans allow you to enjoy the beautiful and cool RGB lighting effects in 16.8 million colors, provide excellent heat dissipation, add fun and bring you better gaming experience.
• 🌈3 Music Modes: To further optimize your gaming experience, the fans are designed with 3 different music modes and each music mode has it’s own lighting mode, which creates awesome visual and audio effects and help you play games in high spirits.
• 🌈RF Wireless Remote: A wireless control is included for convenience and easier operation. By only one key, you can easily adjust fan speed (S/M/H)/ lighting effects/ brightness/ LED speed without opening the case.
• 🌈Synchronizable RGB Lighting via Motherboard: It allows you to control fan lighting with 5V addressable RGB motherboards. Compatible with motherboard software includes US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, etc.
• 🌈No Risk to Purchase: Any quality issue with your fans, please feel free to contact us and let us know. We will try our best to help you! GIM strives to bring the best customer service!

User questions & answers

Question:	Is it that good it only has 2 reviews
Answer:	I can’t respond yet. I have multi sets of case fans and I will have an answer hopefully in 7 days. Assemble was easy and the fan hub is compatible with the 10th gen board so ... so far so good
Question:	Do you have to plug in the arbg to the motherboard? or can i leave it unplugged and use the controller on its own
Answer:	You could use the controler alone or even the controller on your case if you have one but you need a power source from the motherboard either way
Question:	Where do i connect the controller box
Answer:	There is a SATA cable on the computer power supply, just connect it to the fan power cable
Question:	Do the fans have proprietary connections? or standard 3 pin argb or 4 pin rgb
Answer:	The fans are 6 pin and connect only to the fan controller or similar fan controller setups

Product features

What can GIM RGB case fans bring for you?

Synchronizable RGB lighting via motherboard

Sync ready with all mobo houses including Gigabytes, Asus and MSI

Extreme Cooling Performance

33.5 CFM, GIM Fan optimized heat dissipation and hydraulic bearing to ensure ultra-quiet operation

Smart Music Modes

With built-in high sensitive sound sensor, this fans can change different lighting modes with the rhythm of music, make you enjoy the feast of sight and hearing when you play intense computer games playing or listen to any music with strong rhythm.

New Blade Design

Revised curve blade design to improve airflow and air pressure. A refreshed blade for improved lighting.

Specifications:

Fan Dimension: 120mm(W) x 120mm(D) x 25mm(H)

Fan Speed: 0-1300

Rated Current: 0.35A

Noise Level: 0-15 dBA

Rated Voltage: DC 12V(fan) / 5V(LED)

Power Input: 1.92W

Lifetime: 20000 Hrs

Controller Connector: 6 PIN(for fan),2*4 PIN(for LED strip)

Package Contents:

3 x 120mm Cooling Fan

12 x Mounting Screws

1 x Controller

1 x Remote

1 x SYNC Cable

Product description

We’ve made our iconic H Series PC cases even better. Our new lineup still features the elements builders loved in the original H Series, including our patented cable management system, removable fan/radiator mounting brackets, and easy-to-use drive trays, alongside new updates like a front-panel USB-C connector supporting high-Speed USB 3.1 Gen 2 devices, a tempered glass side panel that installs with a single thumbscrew, and an upgraded Smart Device V2 on the H510i.

• New features: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation
• Enhanced cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive
• STREAMLINED COOLING: Two Aer F120mm fans included for optimal internal airflow and the front panel and PSU intakes include removable filters, removable bracket designed for radiators up to 240mm - simplifies the installation of either closed-loop or custom-loop water cooling
• Motherboard support: Mini-ITX, MicroATX, and ATX

User questions & answers

Question:	I bought the h510 elite. my question is: do i need the hue 2 device if i decide to add an extra rear nzxt fan aer rgb 2? or i can use the smart hub
Answer:	Hello! No, you will not need the hue 2 device in order to add another AER RGB 2 fan. The included smart controller v2 will be able to accommodate up to 4 RGB fans in the system :)
Question:	Are the fans that come with this PWM fans
Answer:	No just 3 pin, non-controller-software-enabled. Plus you only get 2. Buy fans separately that are pwm and get 4 of them. There is room for two 140mm or smaller fans on the front and one top fan, one rear fan.
Question:	How much space is there in the back for cable management
Answer:	Plenty of space. best cable management i've seen
Question:	Does the h510 elite come with fans
Answer:	yes 2 exhaust fans one in the top one in the rear both 120mm, the top can be changed for a 140mm

Product features

H510

The H510 and H510i compact mid-tower ATX cases are both stunning and an excellent value. Perfect when you want a small-footprint ATX case without sacrificing features. A removable radiator mounting bracket, flush tempered glass window, multiple fan filters, and front USB 3.1 Gen 2 type-C are just some of the amenities.

MORE MODERN

With a USB 3.1 Gen2-compatible USB-C connector on the front panel, it’s easier than ever to connect smartphones, high-speed external storage, or the latest peripherals to your PC.

STILL BEAUTIFUL

The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build.

ENJOYABLE BUILDS FOR ALL

Cable management can often take more time than assembly. We designed a cable routing kit with pre-installed channels and straps, for intuitive and easy wiring.

• 🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display.
• 🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
• 🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
• 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue.
• 🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.

User questions & answers

Question:	Can I make my deep freeze into a fridge if I plug this into it
Answer:	As far as I know this is only for reptiles, but I’m no expert on mammals. I’d recommend finding one made specifically for young mammals.
Question:	Can I plug another heat belt into the cold outlet? I have one setup right now, would rather not buy another temp controller
Answer:	100% natural phosphorus free oyster shell calcium carbonate
Question:	Have a glass door cooler want to keep temp at 55 willthe probe wire conform to the door
Answer:	The whole is pretty small
Question:	Is the probe waterproof and usable to control homebrew strike water temp
Answer:	No it can’t be hung as it is. If you add some Velcro or some other adhesive yourself it could easily be hung. But as is no.

Product features

Dual Display

• Temperature Control Range：-50~120 °C / -58~248 ° F
• Temperature Resolution：0.1 ° C / 0.1° F
• Temperature Accuracy：±1°C (-50 ~ 70°C) / ±2°F (-58 ~ 160° F)

Heat or Cool Socket

• Temperature Control Mode：On/Off Control, Heating and Cooling
• Input Power：100 ~240VAC, 50Hz/60Hz
• Temperature Control Output：Max. 10A, 100V ~240V AC
• Relay Contact Capacity：Heating (10A, 100-240VAC)/Cooling (10A, 100-240VAC)

Plug & Play

• Buzzer Alarm：High and Low Temperature Alarm
• Ambient Temperature：-30~ 75 ° C / -22~ 167 ° F
• Dimension (Main Body)：140x68x33mm (5.5x2.7x1.3 inch)

Temp Probe

• Sensor Type：NTC sensor (Including)
• Sensor Length：2m / 6.56ft
• Input Power Cable Length：1.5m ( 5ft )

Application

• 3 Sides Ultra Clear Tempered Glass With Car Window Security Films From Automotive Industry
• ARGB/RGB Illumination Compatible With Asus AURA SYNC MSI Mystic Light Gigabyte RGB Fusion 2.0 Asrock Polychrome SYNC
• ARGB/RGB Built In Controller And USB 3.1 Gen 2 Type C
• Transformable PCI E Module For Vertical GPU Support
• Easy Clean With Removable Dust Filters And Cable Management Cabinet Behind Motherboard Tray

User questions & answers

Question:	What are the dimensions of the case itself, not the package
Answer:	220mm(8.7inch) x 485.5mm(19.1inch) x 449mm(17.7inch)
Question:	Is there a way to sync your rgb on a cpu cooler along with your case? If not how would u go about doing this? And do the case fans make alot of noise
Answer:	If the rgb of CPU cooler is compatible with motherboard comes with 3pin 5V ARGB LED connector of AURA SYNC, Mystic Light, RGB Fusion 2.0 or Polychrome SYNC, then you can sync everything and controlled by this motherboard comes with 3 pin 5V ARGB LED connector of AURA SYNC, Mystic Light, RGB Fusion 2.0 or Polychrome SYNC. Dawn TG case comes with 2 x 120mm all black fan and 1 x 120mm 3 pin 5V ARGB fan pre-installed and all those pre-installed fans are BitFenix Spectre Fans
Question:	Will it fit a noctua nh-d15 cpu cooler
Answer:	Dawn TG case supports cooler up to 165mm(6.5inch) high, we checked on Noctua website and the spec listed with NH-D15 is 160mm without fan and 165mm high with fan included. It will fit in Dawn TG case. To be more sure, we would suggest you also contact Noctua customer service to confirm the high with fan included will be within 165mm
Question:	Does it come with fans
Answer:	Yes, it comes with 2 x 120mm all black fan and 1 x 120 mm ARGB fan (3 pin 5V)

Product features

The ARGB Illumination Design and the Pre-installed Spectre ARGB Fan At The Rear Are Compatible With AURA SYNC, Mystic Light, RGB Fusion 2.0 and Poloychrome SYNC

The ARGB Illumination Design and the Pre-installed Spectre ARGB Fan At The Rear Can Also Be Controlled By Built In ARGB/RGB Controller On Dawn TG

High Performance Spectre 3 pin 5V ARGB Fan Pre-installed At The Rear

The Totality of ARGB/RGB Illumination – Synchronized With All Alchemy ARGB/RGB Accessories & Spectre ARGB/RGB Fans

3 Side Tempered Glass Armed with Car Window Security Films from Automotive Industry

Transformable PCI E Module for Vertical GPU Support

Easy Cable Management with Cable Management Cabinet for Clean Build Even Behind Motherboard Tray

Easy Clean with Removable Dust Filters and Both Solid and Mesh Magnetic Top Covers

Front I/O with USB 3.1 Gen 2 Type C

Storage Capabilities

Removable PSU Shrouds Plate- Open To Install 360mm Radiator and 3 x 120mm Fans At The Front

Thermal Capabilities

Upgrade Capabilities

Upgrade Capabilities

Smooth Cable Management Route Behind Motherboard Tray

Product description

Specifications Mfr Part Number: 12UF3W Bulletpoints : Controller Supports up to 16 UNI FAN Unprecedented flexibility / A quicker and easier installation process Daisy-Chain Design : Slide-in / PIN-to-PIN interlocking mechanism L-CONNECT Software (Intuitive Control Interface) Multiple effect /Ability to sync 32 LEDs per fan High static pressure / quiet operation Premium quality / sandblasted aluminum parts / Aluminium frame  Rated Voltage: DC 12V(FAN) & 5V(LED) Color: White Fan Speed: 800~1900RPM Max. Air Pressure: 2.54mmH2O Max. Air Flow: 58.54CFM Acoustical Noise (Min-Max.): 17dB ~ 31dB Locked Current: >= 0.5mA Bearing Type: Fluid Dynamic Bearing(FDB) Operation Voltage: DC 12V & 5V Start-up Voltage: DC 6.0V Input Current: 0.18A(FAN) / 0.6A (LED) Input Power: 3.6W Dimension:  122.8x122.4x25mm

User questions & answers

Question:	can they be separated or do they have to be connected
Answer:	They can be separated from each other. Just note you can only plug 4 seperate power and rgb connectors into the supplied controller unit. The kit comes with the power/rgb cable for each in the 3 pack.
Question:	Do these work with Rgb fusion
Answer:	You can sync the fans to your motherboard's RGB software (Fusion, Aura, Mystic Light, Polychrome) by toggling the motherboard sync option in the L-Connect software Lian-Li has for controlling the fans.
Question:	Do you have to have a rgb header on your motherboard for them to light up
Answer:	You can do that with individual fans but more convenient way to connect would be to use bundled hub and use a usb 2.0 internal header on you motherboard to connect to the hub.
Question:	Why is the price marked up more than 50% higher than msrp
Answer:	Untrusty sellers like "E Tronic" are scalping and marking prices up. Do not support them.