12 best mini itx cases

Product description

The Cooler Master NR200P is a small form factor chassis that combines space-saving efficiency with cooling capabilities normally found on much larger ATX chassis. 280mm radiator support and 7 possible fan mounting provide a multitude of cooling options whether using water or air. The choice of tempered glass side panel or vented panel alongside the inclusion of a PCI Riser cable make the NR200P one of the most flexible small form factor chassis out there.

• Vented Panel: The NR200 is flanked with five ventilated steel panels for unrestricted airflow.
• Unrestricted Cooling Potential: Holds up to 7 fans. 5 sides of open ventilation. Fits CPU coolers up to 155mm tall or up to 280mm long radiators.
• Full-size GPU Compatible: Triple slot GPUs are supported with a maximum length of 330mm and maximum width of 156mm. Vertical mounting is optional.
• 360 Degree Accessibility: Every panel and frame part can be dismantled to allow advanced disassembly and 360 degrees of access to work on components.
• High-quality Materials: Thick, powder coated SGCC steel lasts the life time of the chassis and resists marring from transport or handling.
• Custom Cooling Support: Two liquid cooling pump locations alongside side and bottom radiator mounting locations allow for powerful, custom water-cooled builds inside a compact enclosure
• Easy, Tool-free access: All external panels, including the tempered glass and top-mounted fans, are secured with pins for easy removal, facilitating quick access to the internals without the use of tools.

User questions & answers

Question:	Can this fit two 2.5" ssd and two 3.5 hdd" at the same time
Answer:	A 500w power supply should be sufficient. However, that would not correlate to the overheating of the graphics card. I'd make sure that your case has proper ventilation to keep the system temperature as low as possible. Here is a link to a guide for proper CPU tower cooling practices: https://www.neweggbusiness.com/smartbuyer/over-easy/pc-cooling-how-to-set-up-computer-case-fans/.
Question:	Will the glass panel fit on the nr200? are there any differences between the nr200p and the nr200 besides the nr200p shipping with the glass panel
Answer:	If your model has a PCIe X16 slot and an expansion bay for it, it should work. Please check with HP if you are unsure.
Question:	Will the vented panel be sold separately as an accessory
Answer:	Yes. PNY's website indicates it can run 4 monitors, but there are three mini DisplayPort outputs (along with 3 miniDP to DP adapters) so it can definitely run 3. http://www.pny.com/nvidia-quadro-p400
Question:	How many 2.5” drives will this hold
Answer:	Yes it did, 3, and it drives 3 1080p monitors w/o problem on a workstation that does not have high graphic demands put on it.

Product features

Cooler Master NR200

The Cooler Master NR200 is a small form factor chassis that combines space-saving efficiency with cooling capabilities normally found on much larger ATX cases. 280mm radiator support, 155mm CPU cooler height limit, ample ventilation, and 7 possible fan mounting locations provide multiple cooling options whether air or liquid-cooled. Combined with 3-slot GPU compatibility and custom watercooling pump mounts, the NR200 has few restrictions for even some of the hottest running hardware.

Out-of-the-Box Custom Cooling Support

Two liquid cooling pump locations alongside side and bottom radiator mounting locations allow for powerful, custom water-cooled builds inside a compact enclosure.

Full-size GPU Fitment

Triple slot GPUs are supported with a maximum length of 330mm and maximum width of 156mm. Vertical mounting is optional.

Multiple Motherboard

Compatible with Mini-ITX and Mini DTX. The PSU can be front-mounted for extra motherboard clearance with a maximum space of 244 x 226 mm.

Product description

We’ve made our iconic H Series PC cases even better. Our new lineup still features the elements builders loved in the original H Series, including our patented cable management system, removable fan/radiator mounting brackets, and easy-to-use drive trays, alongside new updates like a front-panel USB-C connector supporting high-Speed USB 3.1 Gen 2 devices, a tempered glass side panel that installs with a single thumbscrew, and an upgraded Smart Device V2 on the H210i.

• New features: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation
• Remastered design: The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build
• Simple cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive
• Streamlined cooling: Two Aer F120mm fans included for optimal internal airflow and the front panel and PSU intakes include removable filters, removeable bracket designed for radiators up to 240mm
• Enhanced Motherboard support: Mini-ITX

User questions & answers

Question:	can you put a hard drive in it
Answer:	You can install a 3.5 hard drive in the back of the case on the bottom It also has 2 spots in the back of the case for two 2.5 hard drive great case I love mine
Question:	I see questions of whether rtx cards will fit, but how bad is the card starved of air? it looks like the card would hug the psu cover very tightly
Answer:	If you’re spending rtx money step up to something with more vents on top so you can exhaust your hot air out better. The c mesh has pretty good airflow
Question:	Will a 3.2 gen 1 header on motherboard work with the gen 2 type c port on the case
Answer:	It is all a bit confusing. They renamed the former USB 3.0 to now call it USB 3.2 Gen 1. That is the big connector (19 pin/20 pin plug with the notch in one side) that connects to the USB 3 port on most motherboards. My new NZXT case with a type C USB port on the front has a cable with a much smaller connector on the end. It doesn't fit into the usual USB 3.0 socket on the motherboard. My Gigabyte Z390 Aorus Pro motherboard does have a USB type C header (with USB 3.1 Gen 1 Support) that matches the cable plug. So, you need that USB type C header on your motherboard. It is small. If you have one, then plug it in. If you don't have one on your motherboard, then you would need an adapter to be able to plug the cable into the usual USB 3.0 (19/20 pin) header.
Question:	Will the gigabyte b450m micro atx motherboard fit with this case
Answer:	No, this case fits Mini ITX. The H510i (or 710) will fit a Micro ATX board though.

Product features

H210

The smallest H Series case, the H210 and H210i come in at a slim 27 liters but give up nothing. The full tempered glass showcases your mini-ITX build with glorious clarity and the front mounting bracket allows installation of radiators up to 240mm. Supporting both SFX and ATX power supplies and front USB 3.1 Gen 2 type-C, you don’t need to make any compromises with this build.

MORE MODERN

With a USB 3.1 Gen2-compatible USB-C connector on the front panel, it’s easier than ever to connect smartphones, high-speed external storage, or the latest peripherals to your PC.

STILL BEAUTIFUL

The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build.

ENJOYABLE BUILDS FOR ALL

Cable management can often take more time than assembly. We designed a cable routing kit with pre-installed channels and straps, for intuitive and easy wiring.

Product description

The SG13 features an atx-compatible power supply mount and can fit ATX power supplies up to 150mm long which provides clearance for CPU coolers up to 61mm tall Optionally builders can choose an SFX power supply If used with the separately-available Silverstone PP08B atx-to-sfx adapter This will provide an additional 21mm of space inside the chassis thereby allowing the use of CPU coolers up to 82mm tall The SG13 also gives builders options when it comes to storage It can fit one 3 5" Drive and ONE 2 5" Drive or alternatively three 2 5" Drives Finally builders have the choice of running the SG13 without active cooling adding a 120mm/140mm fan to the front panel or adding a 120mm/140mm CPU Cooler to the front panel Note that 140mm products will reduce space Available for video cards so for example a 25Mm-thick 140mm-class fan will take up approximately 1" Of the 10 5" Video card space leaving 9 5" For a video card

• Support standard-length expansion cards (10 5 inches)
• Mini-dtx/Mini-ITX motherboard & ATX PSU compatible
• Support 120mm or 140mm single fan all-in-one liquid cooler
• Support 2 5" And 3 5" Hard drives
• Elevated standoff for motherboard back side components

User questions & answers

Question:	will a wraith spire cpu cooler fit
Answer:	Only if you use a sfx power supply. If you try and use a standard ATX power supply it will not fit.
Question:	Can I use a stock cooler with a standard size psu (evga
Answer:	I can vouch for the Intel stock cooler, but I'm uncertain about the AMD varieties. The Intel stock cooler clears a full size PSU easily.
Question:	The white/quiet edition case dimensions are stated to be larger than the other models in the specs. Is this true or a typo by the seller/ Amazon
Answer:	Hello,The size that Amazon references in their specifications is the size of the retail packaging (the box that the case comes in). The SG13's all have the same physical size and do not vary between the quiet and different colored versions.
Question:	Can I fit a normal size psu in this b
Answer:	Yes, I fit a cooler master v750 in mine.

Product features

Two front panel types:

Choose mesh for maximum airflow in gaming systems or solid for quieter operation in home office and home theater systems.

Two color choices:

Choose black for a more subdued look, or black-on-white for a uniquely-classy look.

Impressive compatibility:

Despite the SG13 measuring just 11.22" deep, it can accommodate video cards up to 10.5" long, including all reference-design Nvidia GeForce-based models.

Internal configuration options:

The SG13 features an ATX-compatible power supply mount and can fit ATX power supplies up to 150mm long, which provides clearance for CPU coolers up to 61mm tall. Optionally, builders can choose an SFX power supply if used with the separately-available SilverStone PP08B ATX-to-SFX adapter. This will provide an additional 21mm of space inside the chassis, thereby allowing the use of CPU coolers up to 82mm tall.

The SG13 also gives builders options when it comes to storage. It can fit one 3.5" drive and one 2.5" drive, or alternatively three 2.5" drives.

Finally, builders have the choice of running the SG13 without active cooling, adding a 120mm/140mm fan to the front panel, or adding a 120mm/140mm CPU cooler to the front panel. Note that 140mm products will reduce space available for video cards, so for example a 25mm-thick 140mm-class fan will take up approximately 1" of the 10.5" video card space, leaving 9.5" for a video card.

Product description

The Tower 100 Mini ITX Chassis is the mini version of our iconic case The Tower 900 P/N: CA-1R3-00S1WN-00 SERIES: The Tower MODEL: The Tower 100 CASE TYPE: Mini Tower DIMENSION (H X W X D): 462.8 x 266 x 266 mm (18.2 x 10.5 x 10.5 inch) NET WEIGHT: 6.1 kg / 13.45 lbs. SIDE PANEL: Tempered Glass x 3 (4mm thickness) COLOR: Black MATERIAL: SPCC COOLING SYSTEM Top(exhaust): 120 x 120 x 25 mm Turbo fan (1000rpm, 16 dBA) x 1 Rear(exhaust): 120 x 120 x 25 mm Turbo fan (1000rpm, 16 dBA) x 1 DRIVE BAYS: -ACCESSIBLE -HIDDEN 2 x 2.5“(with side bracket); 2 x 3.5” (without rear fan) EXPANSION SLOTS: 2 MOTHERBOARDS: 6.7” x 6.7” (Mini ITX) I/O PORT: USB 3.2 (Gen 2) Type-C x 1, USB 3.0 x 2, HD Audio x 2 PSU: Standard PS2 PSU (optional) FAN SUPPORT: Top: 1 x 120mm, 1 x 140mm Rear: 1 x 120mm, 1 x 140mm Top of the PSU Cover: 1 x 120mm, 1 x 140mm RADIATOR SUPPORT: Top: 1 x 120mm CLEARANCE: CPU cooler height limitation: 190mm VGA length limitation: 330mm PSU length limitation: 180mm

• The Tower 100 Mini ITX Chassis is the mini version of our iconic case The Tower 900
• 4mm Thick Tempered Glass Window Panels: three 4mm thick tempered glass window panel at front, left, and right
• Handy I/O Port and unique internal design: with a high speed Type-C connector and two USB 3.0.
• The Tower 100 supports up to two 3.5’’ HDD or four 2.5’’ SSD, include two bracket for 2.5’’ SSD at right side.
• Dust Filter Design: Eight super fine filters on the right, left, top, and at the bottom are designed to provide excellent protection against dirt and dust from the outside of the case and is easily removable for cleaning.

User questions & answers

Question:	Does anyone have the dimensions for the glass panels? Trying to get creative with them
Answer:	Hello,Front panel glass is (LxWxD) 22 3/4 x 15 1/2 x 27 3/8 InchesSide panel glass is (LxWxD) 22 3/4 x 10 1/2 x 25 Inches
Question:	How do I get the liquid coolant system? And does it come with all the parts needed to put it together
Answer:	You buy the liquid coolant system you want that will fit in it. It comes pretty much put together... the cooling system in the photo doesn't come with the case.
Question:	where will optical drives be mounted
Answer:	I like this case but it is no go without at least 2 5.25" externally accessible drive bays for DVD/Bluray. In addition, there is no where to mount a USB 3.1 Gen 2 5.25 front panel. It's like they designed in everything and forgot about 5.25" accessories or something.
Question:	What all come with this tower what does it include
Answer:	Sorry, Frank - but why would any of us care about the opinion of how it looks coming from someone who appears to be so classless themself? More importantly, why doesn't Amazon provide a way to report such useless answer as your but instead leaves the rest of us to wade through them to find actually helpful info by people with intelligence?

Product description

Experience the ease of installation and maximum cooling only Thermaltake can deliver with the Core V1 Extreme Mini ITX Cube Chassis. With multiple configurations for both Air and Liquid cooling setups, the Core V1 offers multiple options for today’s cooling demands. Save time with a tool-free drive bay design, optimized air flow and modular chassis options to configure your build, your way and get back to gaming. "Overall ThinkComputers gives the Thermaltake Core V1 Mini-ITX Case a 10 out of 10 score and our Editor's Choice Award" - ThinkComputers "If you are looking for a Mini-ITX case this should be your first choice." - ThinkComputers "The Thermaltake Core V1 is one of the best mini-ITX cases we've ever seen." - HardOCP *Earned HardOCP's Gold Award *Earned Legit Reviews Editor's Choice Award • Extreme Air/Liquid Cooling Configurations Options and Dual Modular Drive Rack Design • 2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 2x 3.5", 2x 2.5" • Includes 1x 200mm Front Fan Pre-installed, Optional Cooling Available • Interchangeable Side Panels allow users to build the system with personality • Chamber Concept Design with optimized Cable management space for Small Form Factor Builds • 3 Year Warranty Key Features: • Case Type: Mini ITX Cube Case • Case Dimension (H x W x D): 10.9" x 10.2" x 12.4" • M/B Type: Mini-ITX (6.7" x 6.7") • Side Panels: Window (Interchnagable) • Supports Standard PS2 Power Supply • Storage Bay: 2x 3.5" or 2.5" • Expansion Slots: 2 • Front I/O Panel: 2x USB 3.0, 1x Headphone, 1x Mic Ports Fans Included: • Front (intake) : 200 x 200 x 30 mm fan (800rpm, 13dBA) Clearance: • CPU Cooler Height: 140mm • VGA Length: 255mm (Inner chassis), 285mm (Outer chassis) Fan Configurations: (Optional) Front: 1x 120mm or 1x 140mm or 1x 200mm Rear: 2x 80mm Radiator Configurations: (Optional) Front: 1 x 120mm or 1 x 140mm Support Please visit our website or search "Thermaltake Support" for any assistance.

• Supports Mini ITX Motherboard
• 2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 2x 3.5 inches, 2x 2.5 inches 1 x 200 millimetre fan, 2 x 80 millimetre turbo fans (optional)
• Interchangeable Side Panels: Symmetrical panels to build the system with personality
• Adjustable I/O Panel Location. Extreme Air/Liquid Cooling Configurations Options and Dual Modular Drive Rack Design
• Chambers Concept. Advanced Ventilation
• Great Expansion in Compact Size : install up to 2 data storage devices. VGA with the length up to 285 millimeter , CPU cooler with height up to 140 millimeter , together with a high wattage PSU of length up to 200 millimeter
• 3 year warranty

User questions & answers

Question:	What are the actual case dimensions? in inches, amazon says (l x w x h) (15.4 x 15.4 x 19), thermaltake says (h x w x d) (13.2 x 12.6 x
Answer:	I'm not sure what those numbers are from Amazon, but Thermaltake's numbers are by far closer to reality. Actually, I think Thermaltake's numbers are pretty much spot on, but the height and length numbers they're quoting have the back thumbscrews and bottom legs included. The actual shell itself, yielding usable space, is roughly along the lines of: L x W x H = 16.25 in. x 12.6 in. x 12.6 in. Again, those are rough numbers, but when you add in the thumbscrew and leg lengths, you end up with approximately the measurements given by Thermaltake.Amazon's numbers are simply wrong.
Question:	Will the cooler master hyper 212 evo fit
Answer:	It depends. The mATX Core 21 will fit the 212 Evo. But, the mITX variant, is too short to fit one.
Question:	Does it use a standard size ATX PSU
Answer:	Yes It does, There is a length limitation of around 200 mm on the psu, but the vast majority are in 140 to 180 mm range should not be any problem. Most psus will fit fine.
Question:	Why is this #1 bestseller in handheld vacuum bags
Answer:	It effectively tears a hole in the space time continuum, where all of your vacuumed whatnot disappears to. It's saving the planet, one rube at a time!

Product features

Great Expansion in Compact Size

Designed with high-end system compatibility, users can easily install up to 4 data storage devices with the modular drive racks, a dual expansion slot VGA with the length up to 260mm, a tower CPU cooler with height up to 140mm, and a high wattage PSU with a length up to 180mm

Chambers Concept

Core V1 has divided into two main chambers: the upper chamber is made for cooling performance and efficiency, and the lower chamber is made for PSU and cable management.

Product description

The Elite 130 is the successor to the widely popular Elite 120 Advanced mini-ITX computer case by Cooler Master. This time around, a meshed front panel has replaced the Elite 120's aluminum panel for enhanced cooling performance. Additionally, HDD/SSD mounting have been rearranged to allow water cooling support at the front of the case, adding to the overall enhancement of cooling performance. If you're looking to build your next system inside a small profile chassis, the Elite 130 is the way to go to ensure that your components stay nice and cool.

• Meshed front panel for increased intake of ambient cool air
• Supports Mini-ITX motherboards for small profile builds
• Unique HDD/SSD mounting bracket positioning allows more space inside
• Supports 120 mm water cooling kit at the front of the case
• Supports standard length ATX PSU
• Compatible with long graphics cards - up to 13.5 inch (343 mm) long
• Includes one 120 mm fan at the front and one 80 mm fan on the side

User questions & answers

Question:	Does this come with a power supply? If not, what would be recommended
Answer:	Does not come with a power supply, but it's very flexible. Just make sure if you get an ATX motherboard that you get an ATX power supply (or micro, mini power supply). I'm using a non-modular that will require a lot of cable hiding, but there's plenty of space to hide cables out of the way.
Question:	Can someone give me the exact specs to this case like width length and hight and also how much room is there for a CPU cooler
Answer:	Everything you request is listed in the manufacturer's info above for the Cooler Master Cosmos II, but some of it conflicts with these answers. For example, CPU cooler height is shown as 190mm/7.48" (not 6.5mm/2.5"), which is more consistent with the large size/width of the case itself. It seems like these comments are not all about this case, so I suggest anyone considering it do his/her own research.
Question:	To anyone who built in this case, and installed a non modular psu, how was it? I was thinking about buying a non modular sfx
Answer:	I did. A PC&Power Cooling 1KW SR PSU that's about 12-15 years old and still going strong. The unused cables, just folded each cable and zip ties them and tucked them behind it. The PSU is huge too. It almost reaches the bottom HDD cages. Another benefit of this case as it won't fit in a lot of cases.
Question:	Can this support three(3) red LED 80 mm fans? thanks
Answer:	I believe it will only support two 80mm in the lower rear section of the case. The other rear fan on the upper section is a 120mm fan, as are the front two (or four if you double up with a radiator.) There is also a 240mm fan mounting on the top.

Product features

Elite 130

Just because you don't have the space, doesn't mean you can't build big. The Elite 130 is a small Mini-ITX case intended to hold some big time hardware. With room for modern full-length graphics cards, it means having a system that can handle anything you throw at it without taking up the space you'd expect. A system inside the Elite 130 would feel just as at home on a desk as it would in a home theater system.

Product description

Personalize your rig with addressable RGB modes! The A1 Plus features a tinted transparent stand and the addressable RGB lights Pierce through to create an awesome lighting experience.The A1 Plus comes with two complementary Sirius loop ASL120 fans. The matte black Structure is fitted with dual radiant addressable RGB loops. The circular RGB outline is presented on both sides of the fan So lighting is present no matter the fan placement. The A1 Plus's convenient wireless charging Station is now WPC Qi 1.2 certified. It now emits 10W of power to strengthen the charging capacity to Qi enabled mobile devices and gaming mice. The square structure provides a hassle-free installation, and the capacity to house powerful hardware in its Mini-ITX form. The A1 Plus supports a CPU heatsink height up to 160mm and accommodates up to 320mm length graphics cards.

• Personalize your rig with addressable RGB modes! The A1 Plus features a tinted transparent stand and the addressable RGB lights Pierce through to create an awesome lighting experience.
• The A1 Plus comes with two complementary Sirius loop ASL120 fans. The matte black structure is fitted with dual radiant addressable RGB loops. The circular RGB Outline is presented on both sides of the fan So lighting is present no matter the fan placement.
• The PSU is prebuilt within the A1 Plus with the cables already managed and is accommodated with two GPU connectors (PCI-E 6 + 2-pin) for high-end graphics cards. Power Supply Compatibility - InWin 650W PSU Included. AC Input/Efficient - AC input: 100-240V / 80 PLUS Gold
• The A1 Plus's convenient wireless charging Station is now WPC Qi 1.2 Certified. It NOW emits 10W of power to strengthen the charging capacity to Qi enabled mobile devices and gaming mice.
• The square structure provides a hassle-free installation, and the capacity to house powerful hardware in its Mini-ITX form. The A1 Plus supports a CPU heatsink height up to 160mm and accommodates up to 320mm length Graphics cards.

User questions & answers

Question:	Can the cooler master v8 gts cpu cooler fit in this case
Answer:	Probably not. Even if it did fit airflow will be an issue since half the cooler will be blocked by the PSU. I have a Dark Rock 4 in mine and that's the biggest cooler I'd recommend for it
Question:	Can a cryorig h7 quad lumi fit in this case
Answer:	yes! you can check pcpartpicker.com if you want to verify !!
Question:	Can you fit a hard drive or SSD in here
Answer:	Up to 2 ssd in the back of the motherboard.
Question:	is the power supply fully integrated? Would i be able to swap it out easily in the future if needed
Answer:	You can swap it out but not easily.

Product features

A1 Plus

Personalize your rig with addressable RGB modes! The A1 Plus features a tinted transparent stand and the addressable RGB lights Pierce through to create an awesome lighting experience.The A1 Plus comes with two complementary Sirius loop ASL120 fans. The matte black structure is fitted with dual radiant addressable RGB loops. The circular RGB outline is presented on both sides of the fan so lighting is present no matter the fan placement.

Top Panel Wireless Charger

The A1 PLUS's convenient wireless charging station is now WPC Qi 1.2 certified. It now emits 10W of power to strengthen the charging capacity to Qi enabled mobile devices and gaming mice.

InWin Sirius Loop 120mm ARGB Case Fans

The A1 PLUS comes with two complementary Sirius Loop ASL120 fans. The matte black structure is fitted with dual radiant addressable RGB loops. The circular RGB outline is presented on both sides of the fan so lighting is present no matter the fan placement.

Loop in More Color!

Personalize your rig with addressable RGB modes! The A1 PLUS features a tinted transparent stand and the addressable RGB lights pierce through to create an awesome lighting experience.

InWin 650W PSU

The 650W PSU is 80 Plus Gold. The PSU is prebuilt within the A1 Plus with the cables already managed and is accommodated with two GPU connectors (PCI-E 6 + 2-pin) for high-end graphics cards.

Product description

Detail Specifications

Product Name

O11 Dynamic MINI

COLOR

Black

MOTHERBOARD

ATX/ Micro-ATX/ Mini-ITX

PSU

SFX/ SFX-L

MATERIAL

0.8mm SPCC (body)

1mm SPCC (interior, back panel)

4 mm Tempered Glass

2mm Aluminum (top and left panel)

FAN SUPPORT

Top: 3x 120mm or 2x 140mm

Side: 2x 120mm or 2x 140mm

Bottom: 3x 120mm or 2x 140mm

Rear: 1x 120mm

RADIATOR SUPPORT

Top: 360mm or 280mm or 240mm radiator

Side: 240mm or 280mm radiator

Bottom: 360 or 280mm or 240mm radiator

GPU LENGTH CLEARANCE

395mm

CPU COOLER HEIGHT CLEARANCE

170mm

VGA Length

370mm

DRIVES

Right side 2 x 2.5" SSD + back plate 2 x 3.5" HDD (or SSD)

EXPANSION SLOTS

3 or 5 or 7 slots (depends on back panel)

IO PORTS

2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button

DUST FILTERS

1 x Top, 1 x Bottom, 2 x Side

Item Dimension (L"x W"x H")

18 x 15 x 21

Weight

41.00 LB

• SPCC / Aluminum / Tempered Glass ATX Mini Tower
• 2 x USB 3.0 / 1 x USB 3.1 Type-C / HD Audio Front Ports
• 2 x 3.5" HDD (or SSD) Internal 3.5" Drive Bays

User questions & answers

Question:	Does this come with the atx extension
Answer:	It has a USB 3.0 header with 2 ports, a power cable, and power LED cable. There is no reset button on this case.
Question:	Sfx power supply - does this have enough room to mount two sfx power supplys
Answer:	Kyle at Bitwit (on youtube) managed to get a 30mm Kraken 120 rad and a 15mm 120 fan there, but there was maybe only 3-5mm comfortably left. When he was using a 25mm fan, it was at the top and had zero airflow. He can run an OC'd 6700k at 65 degrees under load now. He used a short GPU card and just ended by the 2nd fan area.
Question:	Does it come with fans
Answer:	No. You need a SFX Psu, not a standard ATX.
Question:	Psu - never built a system with sfx ps. what are people using with this case
Answer:	I used a Noctua LH L9 on an I7 8700K. At sustained full load it keeps the processor under 90C, which isn't great but acceptable to me. I use a laptop fan pad under the case and keep the case flat. It works.

Product description

The Master Box Q300L is your straightforward option in the lineup of the brand new Master Box Series from Cooler Master. A Series that might be small in size but excels in functionality and modularity without compromising on the thermal performance. Although the size wouldn't tell, the Master Box Q300L supports a standard ATX PSU which we don't see often in the market with this size. Based on the different system setup, the I/O panel can be adjusted to six different locations, three options at each side of the case. You can decide which setup fits your system best. Due to the cube design of the frame and special pattern design on the magnetic dust filter will make the chassis stand out from the rest. The combination of a practical design and the unique customizable outlook makes the Master Box Q300L The perfect choice for office and home.

• I/O panel can be adjusted in 6 different locations and the Case can be positioned: Vertical or horizontal
• Edge to edge acrylic transparent side panel offers a full view inside
• Body depth height: Can support normal size ATX power supply
• Front magnetic design dust filter with open perforated front, top and bottom for high air performance
• Extra space behind the motherboard tray for hidden cable management

User questions & answers

Question:	Will the asus geforce gtx 1060 3gb dual-fan oc fit in this case
Answer:	According to the Asus website, the dimensions for that card are 24.2 x 13 x4.3 Centimeter I'm currently using a Zotac 1060 6GB AMP! Edition, whose dimensions are 210mm x 121.8mm x 37mm The ASUS card is about an Inch longer, but there is WAY more than enough room in the case to fit the ASUS card.
Question:	can it fit a normal ATX power supply
Answer:	Absolutely will fit any ATX power supply. I'm using thermaltake smart series 500w rgb.
Question:	I've seen photos of the handle (from a Q300P) being attached to the center of the top panel of this case. Is this possible
Answer:	You can remove the plastic bit that has the cooler master logo on it and install handles on the case like the Q300P
Question:	Is this case wide enough to support a cooler master hyper 212 evo
Answer:	I know what the official CM specs are, but I think it will fit. This guy installed a taller cooler with its cover and it fit. https://www.vortez.net/articles_pages/cooler_master_masterbox_q300l_review,8.html

Product features

MasterBox Q300L

The MasterBox Q300L is your straightforward option in the MasterBox Q-series from Cooler Master, a series that might be small in size but excels in functionality, modularity, and thermal performance. The combination of a practical design and the unique customizable aesthetic makes the Q300L the perfect choice for office and home use.

System Flexibility

6-orientation I/O panel—both sides: front, top, and bottom.

Edge-to-Edge Acrylic Side Panel

Show off your build through the full-size transparent side panel.

Clean Routing Space

28 mm of open space for hidden cable management.

Small Form Factor, ATX PSU Support

Despite the Micro-ATX form factor and the body depth/height of only 370 x 370 mm, the Q300L can accommodate a normal ATX PSU.

Product description

Extremely Small Footprint - Size does matter! The B1’s extremely small footprint is perfect for small form factor builds such as HTPCs light gaming PCs or even a LAN rig Vents Incorporated in the Exquisite Streamline Design - The B1s exterior represents our insistence on performance and aesthetics Integrating ventilation in the design offers no compromise to form or function AMD & Intel Ready 2 - The depth of the chassis allows approximately 60mm for heatsink-clearance Granting enough room for most AMD and Intel coolers Fan and Dust Filter Included - Strategically placed fan and dust filter provides good thermal solutions and a dust-free interior Style that’s Versatile - Use the B1 to match your lifestyle! Setup Your PC vertically or horizontally! Stand it up and use it as a headphone stand! Preinstalled InWin 200W PSU - The B1 comes with a custom InWin 200W 80 PLUS Gold PSU It’s designed specifically for the B1’s small footprint User Friendly Design - The easy pop-off top that makes the building experience easier despite the smaller frame

• Extremely Small Footprint - Size does matter! The B1’s extremely small footprint is perfect for small form factor builds such as HTPCs light gaming PCs or even a LAN rig
• Vents Incorporated in the Exquisite Streamline Design - The B1s exterior represents our insistence on performance and aesthetics Integrating ventilation in the design offers no compromise to form or function
• AMD & Intel Ready 2 - The depth of the chassis allows approximately 60mm for heatsink-clearance Granting enough room for most AMD and Intel coolers
• Fan and Dust Filter Included - Strategically placed fan and dust filter provides good thermal solutions and a dust-free interior
• Style that’s Versatile - Use the B1 to match your lifestyle! Setup Your PC vertically or horizontally! Stand it up and use it as a headphone stand!
• Preinstalled InWin 200W PSU - The B1 comes with a custom InWin 200W 80 PLUS Gold PSU It’s designed specifically for the B1’s small footprint
• User Friendly Design - The easy pop-off top that makes the building experience easier despite the smaller frame

User questions & answers

Question:	Does case require low profile memory. If so could i get a recommendation for 8g. For intel i3 build. Never built a system
Answer:	Not specifically, but some of the taller memory may be an issue. I used a set of Team Group T-Force Vulcan Z ( TLZGD416G3200HC16CDC01) in one of my builds and it was fine. As far as a suggestion, it depends on your motherboard. I would suggest going to the MFG website and looking at the Memory compatibility list. Of if you want to cheat use PCPartpicker. They are usually pretty good with compatibility.
Question:	Does this fit 15mm 2.5" HDD
Answer:	Yes -- it will hold 2 15mm drives. When you remove the bottom panel the drive area is just over 15mm high.
Question:	Is there a way i can upgrade the psu? i need closer to 400 watts
Answer:	Basically, no, the case has specialize PSU form so the option to upgrade is pretty much limited. Unless you're willing to use a Pico PSU or a more general term: a combination of a AC-DC adapter and a DC-DC ATX converter. And a more extreme method that I did is heavily modify the case to the point that void warranty to fit in an flexPSU inside it (I'm not recommend this).
Question:	Is there room to put An El Gato capture card
Answer:	No, no room for expansion cards.

Product features

InWin B1 Mini ITX-Chassis

Size does matter! The B1’s extremely small footprint is perfect for small form factor builds such as HTPCs, light gaming PCs or even a LAN rig. The B1s exterior represents our insistence on performance and aesthetics. Integrating ventilation in the design offers no compromise to form or function. The depth of the chassis allows approximately 60mm for heatsink-clearance. Granting enough room for most AMD and intel coolers.

Extremely Small Footprint

Size does matter! The B1’s extremely small footprint is perfect for small form factor builds such as HTPCs, light gaming PCs or even a LAN rig.

Vents Incorporated in the Streamline Design

The B1's exterior represents our insistence on performance and aesthetics. Integrating ventilation in the design offers no compromise to form or function.

Fan and Dust Filter Included

Strategically placed fan and dust filter provides good thermal solutions and a dust-free interior.

Preinstalled InWin 200W PSU

The B1 comes with a custom InWin 200W 80 PLUS Gold PSU. It’s designed specifically for the B1’s small footprint.

Product description

"The Master Case H100 is a mini-ITX case that can be configured as a portable gaming rig, a tiny living room PC, and a desktop space-saver. From its industrial construction to its entirely mesh front panel, the H100 fits neatly in the series as a travel-sized alternative. Mesh makes up the entire front panel and part of the top panel, offering just enough room for a built-in handle to add to its portability. Whether you’re saving desk space or looking for a portable alternative to the H Series, the H100 houses powerful mini-ITX systems in a tiny amount of space.

• Compact Mini ITX A highly compact layout efficiently uses space to keep dimensions minimized
• Fine Mesh Ventilation The entire front panel and part of the top panel features fine mesh, achieving efficient airflow while also filtering out dust
• 200mm RGB Fan Even with compact dimensions, the H Series’ iconic 200mm RGB fan is included for optimal cooling
• ATX Power Supply Full sized ATX power supplies are supported to improve hardware compatibility and ensure efficient power to the system
• Built In Handle A handle is built into the top panel for added portability and on the go gaming

User questions & answers

Question:	Can i use a 240mm radiator on h
Answer:	The largest AIO you can install in this case is a 200mm radiator. CM-PNguyen
Question:	Will it fit a Asus 1080 ti fe
Answer:	For sure.
Question:	Can i install another 200mm fan on top and another 200mm to rear
Answer:	No
Question:	How many 3.5in drives can I fit in here
Answer:	It has 2 holders but if you buy additional it will hold 3 I'm not sure why it's shipped with only 2 and not 3 but I own a other master case and took one from it and it works

Product features

MasterCase H100

The MasterCase H100 remains fiercely loyal to the H Series, unwilling to part from the 200mm RGB fan despite its mini-ITX form factor. From its industrial design elements to its generous use of mesh, the H100 fits neatly in the series as a travel-sized variant.

Compact Mini-ITX

A highly compact layout efficiently uses space to keep dimensions minimized.

ATX Power Supply

Full-sized ATX power supplies are supported to improve hardware compatibility and ensure efficient power to the system.

RGB Lighting Control

One RGB controller is included in the accessory pack. Lighting can also be controlled through the reset button if the motherboard does not support RGB control.

Built-In Handle

A handle is built into the top panel for added portability and on-the-go gaming.

Fine Mesh Ventilation

The entire front panel and part of the top panel feature fine mesh, which achieves efficient airflow while also filtering out dust.

200mm RGB Fan

Even with compact dimensions, the H-Series's iconic 200mm RGB fan is included.

Cooling Support

Front: 120mm, 140mm, 200mm

*Mini-DTX may impact configuration options

Component Clearances

CPU Cooler: 83mm

Power Supply: 210mm (without radiator), 160mm (with radiator)

Graphics Card: 210mm (without radiator), 180mm (with radiator)

Storage Support

3.5" / 2.5" Combo x 1

2.5" SSD x 4 (3 + 1 Combo)

• Cube design with full mesh on the front panel. Case size 328*260*202mm / 12.91*10.24*7.95in [When installing, please be careful of the panel!]
• Support 270mm/10.63in graphics card; Support a 120mm/4.7in liquid cooling radiator; Maximum support 160mm/6.3in height CPU Cooler.
• Mini tower with great expandability that supports up to 1 x 3.5" HDD and 1 x 2.5" SSD
• Support ITX motherboard(170*170mm/6.7*6.7in) motherboard.
• Minimalist I/P Ports Design: 1x USB 2.0, 1x USB 3.0, 1x Headphone, 1x Mic Ports
• Please feel free to contact us if you have any question or inquiry, we will resolve it within 24 hours.

User questions & answers

Question:	How many fans can you mount
Answer:	Only one
Question:	I got a matx 195 mm(w) x 170mm(h) board... will it fit
Answer:	Matx mobos won't fit only mini itx.
Question:	Would a asrock q1900m motherboard (227mm) fit
Answer:	Yea
Question:	For the n1 case, description says 240mm radiator fits in front? does that fit with a psu installed? or should i use a 120mm radiator on back? thanks
Answer:	Yes dear, it fits with a standard PSU install at the front , then you can use a 120mm radiator at the back. Thanks for your query!

Product features

Cooling

N-1 mini case is reserved with 2 water-cooled holes, and a 120mm fan position is reserved on the back, which is compatible with 120mm water cooling.

The power supply position of the chassis is designed with a large area of heat dissipation holes, and the air passage is integrated with the water cooling and heat dissipation to ensure stable operation of the power supply.

Notice: case comes without any fans or radiator.

Mini size big world

GOLDEN FIELD N-1 is a super compact case for your super compact needs. Small inner space design can hold a big world, hold back from its expertise in creating strong, well-cooled chassis.

Tool-Free Installation

The fully modular tool-free drive cages to provide the ease of installation/removal and maximize the interior space for highly customizable layouts.

For High Performance In A Small Size

N-1 ITX mini case offers maximum flexibility within the smallest of space.

It compatibles with 270mm display card and 170*170mm ITX motherboard.

A small size, smart look with a strong inner heart to give you a powerful mini system.

Qualilty

Good quality is inseparable from sophisticated craftsmanship.

The panel of the N-1 mini case is designed with simple full punch mesh.

The bottom of the machine case and the top of the machine case are all equipped with cable holes to keep the inside of the machine case beautiful and concise, conducive to the effective heat dissipation of the internal air duct.

When installing, please be careful of the panel！