7 best mid tower computer case

Product description

We’ve made our iconic H Series PC cases even better. Our new lineup still features the elements builders loved in the original H Series, including our patented cable management system, removable fan/radiator mounting brackets, and easy-to-use drive trays, alongside new updates like a front-panel USB-C connector supporting high-Speed USB 3.1 Gen 2 devices, a tempered glass side panel that installs with a single thumbscrew, and an upgraded Smart Device V2 on the H510i.

• New features: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation
• Enhanced cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive
• STREAMLINED COOLING: Two Aer F120mm fans included for optimal internal airflow and the front panel and PSU intakes include removable filters, removable bracket designed for radiators up to 240mm - simplifies the installation of either closed-loop or custom-loop water cooling
• Motherboard support: Mini-ITX, MicroATX, and ATX

User questions & answers

Question:	I bought the h510 elite. my question is: do i need the hue 2 device if i decide to add an extra rear nzxt fan aer rgb 2? or i can use the smart hub
Answer:	Hello! No, you will not need the hue 2 device in order to add another AER RGB 2 fan. The included smart controller v2 will be able to accommodate up to 4 RGB fans in the system :)
Question:	Are the fans that come with this PWM fans
Answer:	No just 3 pin, non-controller-software-enabled. Plus you only get 2. Buy fans separately that are pwm and get 4 of them. There is room for two 140mm or smaller fans on the front and one top fan, one rear fan.
Question:	How much space is there in the back for cable management
Answer:	Plenty of space. best cable management i've seen
Question:	Does the h510 elite come with fans
Answer:	yes 2 exhaust fans one in the top one in the rear both 120mm, the top can be changed for a 140mm

Product features

H510

The H510 and H510i compact mid-tower ATX cases are both stunning and an excellent value. Perfect when you want a small-footprint ATX case without sacrificing features. A removable radiator mounting bracket, flush tempered glass window, multiple fan filters, and front USB 3.1 Gen 2 type-C are just some of the amenities.

MORE MODERN

With a USB 3.1 Gen2-compatible USB-C connector on the front panel, it’s easier than ever to connect smartphones, high-speed external storage, or the latest peripherals to your PC.

STILL BEAUTIFUL

The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build.

ENJOYABLE BUILDS FOR ALL

Cable management can often take more time than assembly. We designed a cable routing kit with pre-installed channels and straps, for intuitive and easy wiring.

Product description

It's ideal for home-computer builders and gamers, with enough space for high-end hardware and expansion. The ample ventilation options, cleanable Air filter, and a perforated mesh bezel keep the entire system cool and dust-free. Versa H22 combines a manageable frame Size with extensive options to customize user's computer or gaming systems.



P/N: ca-1b3-00m1nn-00

Series: versa

Case Type: Mid Tower

Net weight: 4. 2 kg/ 9. 3 lb

Color: exterior & interior: Black

Rear (exhaust): 120 x 120 x 25 mm

Turbo fan (1000Rpm, 16dBA)

Drive bays: lcs upgradable: supports 1/2”, 3/8”, 1/4” water tube

I/O port: USB 3. 0 x 1, USB 2. 0 x 1, HD Audio x 1 PSU: standard PS2 PSU (optional)

Cpu cooler height limitation: 155mm

VGA Length Limitation: 315mm

• [Enhanced airflow] – perforated metal front and top panel, heightened food stands, and specially designed cable routing gap enhance airflow for maximum ventilation
• [3+3+3 drive bay] – 5. 25” x 3 + 2. 5”/3. 5” x 3 + 2. 5” x 3
• [Tool-free installation] – tool-free drive bay design minimizes the hassles of installing/removing. Tool-free mount fan can be clipped on the dust filter
• One 120mm rear fan pre-installed with the option of two 120mm front intake fans to optimize system ventilation
• Supports Mini ITX, Micro ATX, ATX Motherboard
• I/O port - USB 3. 0 x 1, USB2. 0 x 2, HD Audio x 1
• Max CPU cooler height: 155 millimeter / Max VGA length: 315 millimeter

User questions & answers

Question:	Is the power supply supposed to be included with the product
Answer:	no power supply is included
Question:	does it support optical drive
Answer:	How do you get access to the CD-ROM/optical drive with that cover on there?
Question:	Will the 980 ti which is 10.5 in long fit inside the case
Answer:	I don't have the case put I looked in to it for you. its 250mm (with HDD cage) 360mm (without HDD cage) your card is 10.5ins that 266.7mm So no it wont fit with the HDD case installed. but will fit if removed.
Question:	Is it red or blue
Answer:	Its all black, the front panel is see through. Those lights you see in the pictures are just examples of what you could add.

Product features

Versa H22

Ideal for home-computer builders and gamers, with enough space for high-end hardware and expansion. The ample ventilation options, cleanable air filter, and a perforated mesh bezel help to keep the entire system cool and dust-free. Versa H22 combines a manageable frame size with extensive options to customize user’s computer or gaming system.

Gaming Design

Designed for gamer, perforated metal mesh front and top panel to allow quick heat dissipation and rapid air intake for maximum ventilation. The heighten foot-stands at the bottom help to enhance airflow.

Tool-Free Drive Bay Design

Innovative 5.25” & 3.5” tool-free drive bay design minumized the hassels of installing/removing. Trio drive bay concept “3 + 3 + 3”, a perfect ratio for accessory and storage devices.Also, Tool-free mount fan can be clipped on the dust filter. Total 3 Accessible 5.25" + 6 Hidden 2.5" or 3 Hidden 3.5”.

Handy I/O Ports

The perforated front-top panel has implemented one data transfer SuperSpeed USB 3.0 port along with one standard USB 2.0 port, a HD microphone and headset jacks, to grand direct access when needed.

Preinstalled 120mm Rear Fan

One 120mm rear fan preinstalled. Together with two 120mm front fan (NOT included) to optimize the system cooling performance for extreme airflow.

Convenient Support

Pre-mounting holes to support motherboards up to standard ATX and CPU cooler installation, long graphic card also supported as well as Advanced Cable Management and Liquid Cooling System.

Product description

AeroCool Designed Cylon Black Full Acrylic Side Window RGB ready Mid Tower case. Elegant backslash LED with 13 lighting modes on front panel. 6 RGB flow lighting modes. 7 solid color modes. Full acrylic side panel to showcase your rig. Supports liquid cooling: 240mm radiator in the front panel. Supports air cooling: 120mm fan on top to enhance cooling performance Supports CPU cooler up to 155mm. Supports high-end graphics cards up to 371mm. Supports VGA fan bracket design: two 120mm fans for superior cooling performance of VGA. Supports up to two 3.5” HDDs and two 2.5” HDDs/SSDs. Supports PSU up to 180mm. Supports SD or micro SD memory card. Dual chamber design for improved ventilation. Removable PSU dust filter for easy cleaning. Steel Thickness: 0.5mm. Motherboards: ATX/micro ATX/mini-ITX. Case Dimensions (Internal): 188 x 430 x 375mm (W x H x D). Case Dimensions (Overall:198 x 459 x 413mm (W x H x D). 3.5” Drive Bay x 2 (Compatible with 2.5" HDD/SSD). 2.5” Drive Bay x 2. Expansion Slots:7. Supports GPU up to 346mm /371mm (without front fan). Supports CPU up to 155mm. I/O Ports: USB3.0 x 1 ; USB2.0 x 2 ; HD Audio & Mic.; SD Card Reader. Air Cooling: Front: 120mm x 3 or 140mm x 2 (Optional); Top: 120mm x 1 (Optional); Rear: 120mm x 1 (Includes 120mm Fan). Supports VGA Fan: 120mm x 2 (Optional). Liquid Cooling: Front: 240mm Radiator (Optional). Net Weight/Gross Weight: 3.8kg (8.38 lbs.)/4.5kg (9.92 lbs.). Power Supply: ATX PSU (Up to 180mm, Optional); Customer Service: Supportataerocool.us. RMA Service: RMAataerocool.us or call 510-661-9948.

• Full Acrylic Side Window RGB ready Mid Tower case. Elegant backslash LED with 13 lighting modes on front panel. 6 RGB flow lighting modes. 7 solid color modes.
• Supports liquid cooling: 240mm radiator in the front panel. Supports air cooling: 120mm fan on top to enhance cooling performance. Supports high-end graphics cards up to 371mm.
• Supports VGA fan bracket design: two 120mm fans for superior cooling performance of VGA. Supports SD or micro SD memory card. Dual chamber design for improved ventilation.
• Removable PSU dust filter for easy cleaning. Steel Thickness: 0.5mm. Motherboards: ATX/micro ATX/mini-ITX. Liquid Cooling: Front: 240mm Radiator (Optional).
• I/O Ports: USB3.0 x 1; USB2.0 x 2 ; HD Audio & Mic. Air Cooling: Front: 120mm x 3 or 140mm x 2 (Optional); Top: 120mm x 1 (Optional); Rear: 120mm x 1 (Includes 120mm Fan).

User questions & answers

Question:	Does this fit the asus prime B450M-A
Answer:	Yes this fits micro and atx boards
Question:	Can you make the rgb light white and what different modes can you have
Answer:	There are 7 solid colors. Purple, cyan, yellow, white, blue, green, and red. There are also 6 RGB flow lighting modes.
Question:	Que motherboard recomienda poner
Answer:	Atx
Question:	What is the difference between this one and the 105$ one
Answer:	This one is cheaper

Product features

Aerocool Cylon RGB Mid Tower with Acrylic Side Window, Black and White

Cylon is a mid-tower case with an acrylic side window panel and liquid cooling support. Its elegantly designed RGB LED front panel displays over 13 lighting modes. Select from one of six unique RGB flows or choose from seven color modes so you can showcase your favorite color along with your own unique style. With additional support for VGA fan coolers and dual chamber design, this case allows for superior airflow and cooling for your system.

• Unique LED front panel with 13 lighting modes
• Full acrylic side window panel to showcase your rig
• Supports liquid cooling: 240mm radiator in the front panel
• Supports CPU cooler up to 155mm
• Supports VGA fan bracket design for VGA cooling
• Dual chamber design for improved ventilation
• Removable PSU dust filter for easy cleaning

• Computer case with clean aesthetic. Dimensions: 8.1 x 16.3 x 19.1inch. 0.8mm SPCC front panel and SPCC 0.6mm main structure with plenty of room for all components, make it durable and roomy for your first build, 1st PC, theater and gaming PC
• Gaming PC Case with tempered glass side panel allows for a great view of your RGB components. Changing motherboard size supporting ATX, mATX and Mini-ITX
• Mid-Tower Chassis with ease installation design. Removable SSD mounting brackets, swappable top and front fan brackets and bottom side panel PSU and HDD bay. Change with no more pain
• Desktop computer shell case with professional cable management solution. Extra space behind the motherboard tray for hidden cable organization. I/O essentials, 2xUSB 3.0, Power button, audio out and in on the top
• High air performance with Magnetic Dust Filter, Side Ventilation and 2 Pre-installed 120mm fans. Magnetic dust filters on top and front, dust filter tray at bottom. Liquid cooling ready

User questions & answers

Question:	Can i dismount the fans that come installed
Answer:	Small Phillips head screws. But just sort through and test them and you will find them that's what I did.
Question:	Will the power supply be affected by the airflow because of the case
Answer:	No
Question:	Would a enermax ets-t50 fit in this case
Answer:	No, your motherboard should come with the IO shield, as they are different for every motherboard.
Question:	Can this case support big graphics cards? Like 2080 or 5700 rx
Answer:	The front mesh panel has round plastic pins that clip into the front of the case squeeze these and gently pop the side out as you follow down the side of the case releasing all pins. This will release the front panel to install fans. The documentation on my case said that you could pull two screws to remove the fan housing but that was not accurate on the mint green dlm21 mesh case.

Product features

LIAN LI LANCOOL 205 Tempered Glass ATX Computer Case

The Lian Li 205 demonstrates elegance and minimalism in its sleek design. Show off your build with its tempered glass side panel. Fit to house any component you desire. You dream it, you can build it in this case. From water cooling to custom fans!

• Clean aesthetic computer case
• Tempered glass side panel
• Easy installation design
• Professional cable management
• High air performance
• Supporting ATX, mATX and Mini-ITX

Easy To Change, Your Call

Swappable top and front fan bracket.

Change Your Mind Again? No More Pain

Removable bottom side panel for easy hard drives access change it anytime. easy!

Changeable Motherboard Size

Support ATX / M-ATX / MINI ITX size motherboard.

Professional Cable Management

Extra space behind the motherboard tray for hidden cable organization.

Multi-size Cooler Support

High air performance with Magnetic Dust Filter, Side Ventilation and 2 Pre-installed 120mm fans. Multi-size fans/radiator support.

I/O Essentials

1 x Power button; 2 x USB 3.0/3.1 Gen1 (5Gbps) port; 1 x Audio; 1x Microphone; 1 x Power LED.

Product description

Motherboard: Mini-ITX/Micro-ATX/ATX/E-ATX. Case Type: Mid Tower. Materials: ABS+SPCC+Tempered Glass. Product Dimensions 442X210X479mm. 3. 5" Drive Bays: 2. 2. 5" Drive Bays: 4. I/O Ports : USB2. 0×2、USB3. 0×1、Audio×1、Mic×1. Power Supply Type : ATX PS2 （maximum length: 170mm). Cooler Height Limit : 168 mm VGA Length Limit : 370mm Horizontal, 340mm Vertical Liquid Cooler Support Front: 120/140/240/280/360mm; Top: 120/140/240/280mm; Rear: 120mm

• Tempered glass side-panel and front panel
• 210mm wide tower compartment with 24mm clearance for cable management
• Large area of air-intake on both sides of the front panel to ensure extreme cooling
• Magnetic dustproof net at top, dust-filter at front and bottom
• A newly designed cable routing hole preset on PSU Shroud for better cable management with GPU Power cabl

User questions & answers

Question:	How do you release the front panel on the 50 case? I want to install the fans from the front so the frame doesnt block the rgb. I squeezed the clips
Answer:	Please make sure the fan is also connected to a fan header on your motherboard. If you require any assistance please feel free to contact support via our website and we'll gladly assist you.
Question:	Will this fit a Corsair A500 along with the mottherboard and cpu in the case
Answer:	The 4000X has a transparent front panel that allows you to see the RGB lighting of your fans.
Question:	Will the $219 gigabyte geforce gtx 1660 6gb gaming oc 3 fan card fit in this case
Answer:	Yes, a 360mm radiator may be mounted to the front of our 4000 Series cases. If you have any more questions or concerns, please feel free to reach out via support on our website and we'll happily assist you.
Question:	What are the dimensions of the tempered glass side panel and front panel? I'm going to do some armor etching and would like to order the stencils
Answer:	The 4000X RGB comes with 3 SP Elite RGB fans. The 4000D airflow comes with 2 AirGuide fans.

Product description

The Fractal Design Define R5 is the next evolution in the widely popular Define Series. Packed with intelligently designed enthusiast-oriented features delivering a silent case with powerful and expansive air and liquid cooling support, presented in a stunning Scandinavian inspired construction. The Define R5 case reaches the highest level of silent computing through strategically placed dense sound-absorbing material, ModuVent fan vent covers and finely tuned Dynamic Series fans. The Define R5 was designed with configurability in mind, accommodating up to 8 hard drives and all modern graphics card. Should you wish to expand your system with water cooling components or more fans the layout can easily be configured to meet your demand.

• Optimally designed for silent computing with high density noise-reducing material throughout the case for maximum sound absorption, while not compromising on airflow and cooling capabilities
• Extensive water cooling support for a case of this size; housing radiators up to 420mm in the top and 360mm in the front
• Newly, configured front door with dual side mounting to better fir your work space
• Highlighting 2 dedicated SSD mounts cleanly placed behind the motherboard tray that feature innovative new brackets delivering a tool-free installation and removal
• The HDD cage system holds up to eight 3.5" or 2.5" drives and is more adaptable than ever, allowing the user to modify the case layout according to personal preference with more places to relocate the cages
• Sturdy metal HDD trays provide excellent dampening features for the hard drives while providing better airflow through the cage with an updated, more open design
• The new and innovative Quick Release System on the left side of the case provides secure mounting of the left side panel, yet grants quick and easy access to the system.

User questions & answers

Question:	Does it come with screws
Answer:	Yes, it comes with all the standard computer screws assuming it's in the original unopened packaging from Fractal Design. If you're buying a returned package or used item then it may be missing some screws.
Question:	Do I need any particular tools to build a PC with this case
Answer:	At most a phillips screwdriver. This is the best designed case I think I've ever had. 100% modular. You can place the PS on all four corners (top and bottom). Both side panels come off easily and the off side has places to mount multiple SSDs so they are away from the heat, and a place to easily run the power cables. Al six sides can host multiple fans up to 140mm in size. Tons of room.
Question:	how many 5.25 inch and 2.5 inch dvd/bd or card reader drive slots are in the front
Answer:	There are two 5.25 inch bays but you'll need an adapter If you want to use one for a 2.5.
Question:	How many fans are included and what sizes are they
Answer:	Case comes with 2 140 mm fans,one mounted in front,one mounted in rear. I moved the one from rear to front, use 120mm radiator in rear w/120 mm fan and added another 120 mm fan in bottom between psu and hdd rack, running nice and cool with amd 9370 and gtx 970.and quiet!

Product features

Fractal Design Define R5 - Mid Tower Computer Case

The R5 is packed with intelligently designed enthusiast-oriented features delivering a silent case with powerful and expansive air and liquid cooling support

• Optimally designed for silent computing with high density sound-dampening material
• Extensive water cooling support for a case of this size
• Equipped with tool-less ModuVent fan slot covers

Key features

• Optimally designed for silent computing with high density sound-dampening material throughout the case, while not compromising on airflow and cooling capabilities
• Extensive water cooling support for its size; housing radiators up to 420 mm in the top and 360 mm in the front
• Equipped with new tool-less ModuVent fan slot covers allowing the user to install more fans if desired or keep fan slots covered to maximize sound absorption
• Including two Fractal Design Dynamic GP-14 140 mm fans developed for superlative airflow while still maintaining low noise levels
• Three-speed fan controller is strategically integrated in the front panel and supports up to three fans

Storage features

• Two dedicated SSD mounts cleanly placed behind the motherboard tray, featuring innovative new brackets for tool-free installation and removal
• The HDD cage system holds up to eight 3.5” or 2.5” drives and is more adaptable than ever, allowing the user to modify the case layout according to personal preference with more places to relocate the cages
• The ODD cage can easily be removed to gain additional interior space; the area can be freed up to allow for increased airflow, to provide a new place for HDD cage mounting or to make more room for water cooling components.
• Sturdy metal HDD trays provide excellent dampening features for the hard drives while providing better airflow through the cage with an updated, more open design

• 【REMARKABLE EXPANSION】This excellent ATX Mid Tower Gaming computer case supports motherboards up to E-ATX, ATX, Micro-ATX, Mini-ITX; Internal Bays: 3 x 3.5 HDD's and 3 x 2.5 SSD's (Not included).
• 【POWERFUL COOLING SYSTEM】6 MVP 120mm RGB Dual light loop LED Fans pre-installed in this pc gaming case: 3 x Front, 2 x Top, 1 x Rear; up to 360mm long liquid-cooling radiator at front(optional). You can change the color and mode of the light through the RGB button.
• 【TEMPERED GLASS PANELS】To level up gaming experience for users, 907 is equipped with 2*4mm thickness translucent Tempered Glasses in Galaxy Dark, which gives you a clear view of RGB case.
• 【MUSIC LIGHT SHOW】Through the remote control, select the corresponding voice mode, the effect of the light will vary with the size of the music.
• 【TOP I/O PANEL】1 x USB3.0 Port, 2 x USB2.0 Port, 1 x HD Audio, RGB Button, Power/Reset.

User questions & answers

Question:	Were do i connect the fan? Motherboard or somewhere else
Answer:	You just connect power (4 pin molex) the control board handles everything else, though I'm sure you could remove one fan from the board and connect it directly to your motherboard and it will work too
Question:	Can it fit a 240mm rad on the top of the case
Answer:	I was able to fit a 240 on top. I think it will come down to the size of your VRM and RAM heat sinks
Question:	Is there any way to keep the fan color white without them flashing
Answer:	There are a ton of color profiles you can scroll through with the included remote, solid white is definitely one of them.
Question:	Do the fans work with Asus aura sync
Answer:	I got mine to work with Aura Sync. There was an RGB header on my MB that matched a cable for the fans. Then you hold down the RGB button on top of the case to switch control to the header.

Product features

ATX MID TOWER COMPUTER CASE 907

The tempered glass panels allow you to show gorgeous RGB lighting.

The voice-activated fan with remote control offers three music modes for you.

Mode 1- Symphony：The lights will on when you make a sound;

Mode 2- Horse racing：The lights will change with the beats of music;

Mode 3- Static：The lights will change in various colors when you play music.

Voice-activated fan with remote control

Three music mode offer a cool visual and auditory experience for you.

MVP SPORT RGB FANS

RGB fans with 7 colors split between two separate light loops allow for nearly endless customization.

Ample Airflow

Keep cool with 6 x 120mm RGB fans included.

Cable Management Made Simple

Cable routing channels with included velcro cable straps for clean cable management.

Excellent Dust-Proof Design

Two dust filters on the top and bottom, achieve 100% ideal dust-proof.

Tempered Glass Design & Anti-Collision Protection

Two tempered glass panels on the front and sides of the case. Which allow you to showcases gorgeous RGB lighting. The anti-collision protection can effectively avoid been slashed by glass.