12 best desktop computer cases

Product description

The Carbide Series 100R Mid Tower case lets you hide a high-powered, killer gaming rig inside of a case that would look at home in any professional environment. It's easy to customize with plenty of tool-free installation options, highly expandable with extra fan ports and drive bays to support SSDs, and performance-minded with USB 3.0 support and direct airflow to the GPU. The Carbide Series 100R looks simple and elegant from the outside, but the inside provides you with all the options you need for a killer rig.

Customer Service / Tech support: 1-888-222-4346 opt. 1

• Elegant, Modern Design: With a mesh-free front panel, the 100R is both professional enough for the office and customizable enough for any home PC build
• USB 3.0 Compatible: Dual USB 3.0 front panel ports offer the best in connectivity.
• SSD Support: All four hard drive trays provide solid-state drive support. Compatible corsair liquid coolers is h55, h60, h75, h80i. Maximum cpu cooler height is 5.9 inch. Maximum psu length is 9 inch
• Direct Airflow to Top GPU: Direct airflow gives your GPU added cooling for intense gaming sessions.Case Windowed:Acrylic
• Up To Five Fan Mounts Plus One Included 120mm Fan: A 120mm fan gets your cooling off the ground, and extra mounts provide added expandability
• Tool-free 3.5" and 5.25" Drive Installation: Builds are made easier with tool-free drive installation
• Thumbscrew Side Panels: No tools are needed to easily access the inside of your case
• Flush-Mounted Side Panel Window: The side panel window showcases the powerful components inside

User questions & answers

Question:	does the hyper 212 evo fit
Answer:	Yes. I'm actually using a Hyper212 Evo in my setup. The top of the heatsink just barely clears the left side case door. There's enough clearance at the top of the case that you can install the optional top vent case fans even after both mobo and Hyper212 are installed. I would recommend installing the cooler after the mobo is installed and everything plugged in though, as the top stand off screws/fan sockets/power sockets will be kind of hard to reach if you install the cooler before indtalling the mobo in the case.
Question:	Are the hard drive bays in this computer cable of holding a ssd drive or do I have to buy a ssd bracket for this case
Answer:	The drive bays included are capable of holding an SSD or a standard Hard Drive, I have both mounted in my system.
Question:	How many fans can this case have
Answer:	I have the 100R with the clear side panel and I have 5 installed in mine with some case modding done in it. 2 in front, 2 in the top, 1 in the back.
Question:	what kind of motherboards can be used
Answer:	This will fit a standard sized ATX, Micro-ATX and Mini-ITX motherboards. Please remember that a standard size ATX motherboard is 12" x 9.6" (305 mm × 244 mm) For more information read this wikipedia article about the ATX standard: https://en.wikipedia.org/wiki/ATX#Variants Also a good reference is the Corsair 100r User Manual: https://www.corsair.com/corsairmedia/sys_master/productcontent/100R_Install_Guide.pdf And read though the case information on Corsair Site: https://www.corsair.com/us/en/Categories/Products/Cases/Carbide-Series%E2%84%A2-100R-Mid-Tower-Case/p/CC-9011075-WW#tab-overview Scroll all the way down to see motherboard compatibility.

Product features

Elegant and modern on the outside

With all the features a serious PC builder needs on the inside. Need a case that’s sleek and streamlined on the outside, but packed with serious features, all for a great value? Look no further than the Carbide Series 100R Mid Tower case.

Simple, elegant, and sharp.

It’s the performance PC platform in stealth mode. With a mesh-free front panel, flush-mounted side panel window and clean lines, the 100R is both professional enough for the office and customizable enough for any home PC build.

Storage, simplified.

Tool-free 3.5” and 5.25” drive installation, and all four hard drive trays provide solid-state drive support so you can mix and match to fit your needs. On the outside, dual USB 3.0 front panel ports give you quick and easy access to the latest high-speed portable hard drives and flash drives.

Creative cooling

Five internal fan mounts let you customize your cooling to match your build. We’ll get you started with one included 120mm fan. The case is designed to draw airflow directly to the GPU to help ensure that you and your graphics card will both keep your cool during intense gaming sessions.

The features that builders want

You want the attention to detail that makes it easy. You’ll appreciate things like cable routing channels for easy cable organization and better-looking builds, and the side panels are attached with thumbscrews so you can get in and out without hunting for a screwdriver.

Product description

We’ve made our iconic H Series PC cases even better. Our new lineup still features the elements builders loved in the original H Series, including our patented cable management system, removable fan/radiator mounting brackets, and easy-to-use drive trays, alongside new updates like a front-panel USB-C connector supporting high-Speed USB 3.1 Gen 2 devices, a tempered glass side panel that installs with a single thumbscrew, and an upgraded Smart Device V2 on the H510i.

• New features: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation
• Enhanced cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive
• STREAMLINED COOLING: Two Aer F120mm fans included for optimal internal airflow and the front panel and PSU intakes include removable filters, removable bracket designed for radiators up to 240mm - simplifies the installation of either closed-loop or custom-loop water cooling
• Motherboard support: Mini-ITX, MicroATX, and ATX

User questions & answers

Question:	I bought the h510 elite. my question is: do i need the hue 2 device if i decide to add an extra rear nzxt fan aer rgb 2? or i can use the smart hub
Answer:	Hello! No, you will not need the hue 2 device in order to add another AER RGB 2 fan. The included smart controller v2 will be able to accommodate up to 4 RGB fans in the system :)
Question:	Are the fans that come with this PWM fans
Answer:	No just 3 pin, non-controller-software-enabled. Plus you only get 2. Buy fans separately that are pwm and get 4 of them. There is room for two 140mm or smaller fans on the front and one top fan, one rear fan.
Question:	How much space is there in the back for cable management
Answer:	Plenty of space. best cable management i've seen
Question:	Does the h510 elite come with fans
Answer:	yes 2 exhaust fans one in the top one in the rear both 120mm, the top can be changed for a 140mm

Product features

H510

The H510 and H510i compact mid-tower ATX cases are both stunning and an excellent value. Perfect when you want a small-footprint ATX case without sacrificing features. A removable radiator mounting bracket, flush tempered glass window, multiple fan filters, and front USB 3.1 Gen 2 type-C are just some of the amenities.

MORE MODERN

With a USB 3.1 Gen2-compatible USB-C connector on the front panel, it’s easier than ever to connect smartphones, high-speed external storage, or the latest peripherals to your PC.

STILL BEAUTIFUL

The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build.

ENJOYABLE BUILDS FOR ALL

Cable management can often take more time than assembly. We designed a cable routing kit with pre-installed channels and straps, for intuitive and easy wiring.

Product description

AeroCool Designed Cylon Black Full Acrylic Side Window RGB ready Mid Tower case. Elegant backslash LED with 13 lighting modes on front panel. 6 RGB flow lighting modes. 7 solid color modes. Full acrylic side panel to showcase your rig. Supports liquid cooling: 240mm radiator in the front panel. Supports air cooling: 120mm fan on top to enhance cooling performance Supports CPU cooler up to 155mm. Supports high-end graphics cards up to 371mm. Supports VGA fan bracket design: two 120mm fans for superior cooling performance of VGA. Supports up to two 3.5” HDDs and two 2.5” HDDs/SSDs. Supports PSU up to 180mm. Supports SD or micro SD memory card. Dual chamber design for improved ventilation. Removable PSU dust filter for easy cleaning. Steel Thickness: 0.5mm. Motherboards: ATX/micro ATX/mini-ITX. Case Dimensions (Internal): 188 x 430 x 375mm (W x H x D). Case Dimensions (Overall:198 x 459 x 413mm (W x H x D). 3.5” Drive Bay x 2 (Compatible with 2.5" HDD/SSD). 2.5” Drive Bay x 2. Expansion Slots:7. Supports GPU up to 346mm /371mm (without front fan). Supports CPU up to 155mm. I/O Ports: USB3.0 x 1 ; USB2.0 x 2 ; HD Audio & Mic.; SD Card Reader. Air Cooling: Front: 120mm x 3 or 140mm x 2 (Optional); Top: 120mm x 1 (Optional); Rear: 120mm x 1 (Includes 120mm Fan). Supports VGA Fan: 120mm x 2 (Optional). Liquid Cooling: Front: 240mm Radiator (Optional). Net Weight/Gross Weight: 3.8kg (8.38 lbs.)/4.5kg (9.92 lbs.). Power Supply: ATX PSU (Up to 180mm, Optional); Customer Service: Supportataerocool.us. RMA Service: RMAataerocool.us or call 510-661-9948.

• Full Acrylic Side Window RGB ready Mid Tower case. Elegant backslash LED with 13 lighting modes on front panel. 6 RGB flow lighting modes. 7 solid color modes.
• Supports liquid cooling: 240mm radiator in the front panel. Supports air cooling: 120mm fan on top to enhance cooling performance. Supports high-end graphics cards up to 371mm.
• Supports VGA fan bracket design: two 120mm fans for superior cooling performance of VGA. Supports SD or micro SD memory card. Dual chamber design for improved ventilation.
• Removable PSU dust filter for easy cleaning. Steel Thickness: 0.5mm. Motherboards: ATX/micro ATX/mini-ITX. Liquid Cooling: Front: 240mm Radiator (Optional).
• I/O Ports: USB3.0 x 1; USB2.0 x 2 ; HD Audio & Mic. Air Cooling: Front: 120mm x 3 or 140mm x 2 (Optional); Top: 120mm x 1 (Optional); Rear: 120mm x 1 (Includes 120mm Fan).

User questions & answers

Question:	Does this fit the asus prime B450M-A
Answer:	Yes this fits micro and atx boards
Question:	Can you make the rgb light white and what different modes can you have
Answer:	There are 7 solid colors. Purple, cyan, yellow, white, blue, green, and red. There are also 6 RGB flow lighting modes.
Question:	Que motherboard recomienda poner
Answer:	Atx
Question:	What is the difference between this one and the 105$ one
Answer:	This one is cheaper

Product features

Aerocool Cylon RGB Mid Tower with Acrylic Side Window, Black and White

Cylon is a mid-tower case with an acrylic side window panel and liquid cooling support. Its elegantly designed RGB LED front panel displays over 13 lighting modes. Select from one of six unique RGB flows or choose from seven color modes so you can showcase your favorite color along with your own unique style. With additional support for VGA fan coolers and dual chamber design, this case allows for superior airflow and cooling for your system.

• Unique LED front panel with 13 lighting modes
• Full acrylic side window panel to showcase your rig
• Supports liquid cooling: 240mm radiator in the front panel
• Supports CPU cooler up to 155mm
• Supports VGA fan bracket design for VGA cooling
• Dual chamber design for improved ventilation
• Removable PSU dust filter for easy cleaning

Product description

Designed for PC builders who want a sleek, Custom looking case with great airflow and a crystal clear tempered glass panel – The Versa V200 TG RGB is the ultimate mid-tower. This Special RGB version comes with three 120mm 12V RGB front fans that are Dual-Mode controllable either through the front I/O panels, or by connecting to compatible ASUS gigabyte, MSI, as rock or BIOSTAR motherboards. The V200 TG RGB supports a huge range of air and liquid cooling hardware, high-end GPU and even a handy PSU cover in the basement. Specifications • Dimensions (H x W x D): 17.6 x 8.54 x 17 inch / 447 x 217 x 432 mm • Net Weight: 7.1 kg / 15.65 lb • Case Type: Mid tower • Color: Black • Case Material: SPCC • Side panel: 4mm tempered glass panel x1 • Drive Bays: Hidden: 2 x 3.5” • Expansion slots: 7 • Motherboards: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) • I/O port: USB 3.0 x 1, USB 2.0 x 2, HD Audio x 1, RGB button x 1 • Pre-installed fans: Rear: 120 x 120 x 25 mm fan x 1 Front: 120 x 120 x 25 mm fan x 3 • Fan Support: Front: 3 x 120mm, 2 x 140mm Top: 2 x 120mm, 2 x 140mm Rear: 1 x 120mm • Radiator Support: Front: 1 x 240mm, 1 x 280mm Rear: 1 x 120mm • Clearance: Maximum GPU length: 380mm Maximum CPU cooler height: 160mm Maximum PSU length: 170mm • Warranty: 3 years.

• Light up the system: 3 Pre-installed 120mm 12V motherboard Sync RGB fans (Sync with ASUS, Gigabyte, MSI, Asrock, and BIOSTAR 12V header Motherboards) + 1 Black fan at back
• Built-in dual-mode 12V Sync controller: Control light via I/O port, RGB Light button (16 LED modes/7 Color) or via 12V header RGB sync motherboard (Sync with Asus, Gigabyte, MSI, Asrock, and BIOSTAR 12V header Motherboards)
• 16 LED modes through I/O port RGB Light button: RGB mode, single color mode (7 Colors), breath mode (7 Colors), light off 7 Colors: red, yellow, green, cyan, blue, White, Purple]
• Clear view of PC gaming: 4mm thick Tempered Glass Side panel with standard mounting
• Built-in PSU cover: Cover all your cables for a professional look combined with a window to show off your colorful power
• Drive Bays: 3 x 2. 5" + 2 x 3. 5"
• Supports Mini ITX, Micro ATX, and ATX motherboard

Product features

16 Lighting Modes via I/O Port RGB Light Button

RGB Lighting: Mode 1

Single Color: Mode 2-8 (Red, Yellow, Green, Cyan, Blue, White, Purple)

Breath: Mode 9-15 (Red, Yellow, Green, Cyan, Blue, White, Purple)

Light Off: Mode 16

Handy I/O Port

Top-front panel features,

USB 3.0 x 1

USB 2.0 x 2

HD Audio x 1

RGB Light Button

Tempered Glass Side Window

More durable and less wear and tear, the 4mm tempered glass panel on the left side is designed to have thumb screws tightened at each corner.

Built-in PSU Cover

Full-length PSU cover with vent hole provides clean and tidy look hiding cables from view.

Tool-Free Installation HDD

Three 2.5” HDD with HDD bracket inside the case + Two 3.5” HDD with HDD tray below PSU shroud

Superior Hardware Support

Max height of CPU cooler: 160mm

Max length of dual expansion slot VGA: 330mm

Max length of PSU: 160mm

Fan Support Chart

Front: 3 x 120mm, 2 x 140mm

Top: 2 x 120mm, 2 x 140mm

Rear: 1 x 120mm

Radiator Support Chart

Front: 1 x 240mm, 1 x 280mm

Rear: 1 x 120mm

Product description

The E-ATX MasterBox TD500 Mesh White takes airflow performance and turns it into an art form. Powered by three pre-installed ARGB fans, airflow is fed through a geometric, three-dimensional mesh front panel into a system viewed from a crystal-clear tempered glass side panel. The Crystalline Tempered Glass side panel is precision engineered for both its toughness and its aesthetics through CNC machining. Polygonal Mesh takes its form from Cooler Master’s Fine Mesh technology, simultaneously providing high airflow, dust filtration, and a strengthened structure. With advanced technology set firmly into fine art, the MasterBox TD500 Mesh White carves its own path to the bleeding edge.

• Polygonal Mesh features a 3-dimensional contour and is also capable of simultaneously providing high airflow and dust filtration.
• A crystalline tempered glass side panel dons a crystalline design, precision engineered for strength as well as aesthetics
• Three included addressable RGB fans flood the build with lighting while providing considerable airflow.
• For enthusiast-grade cooling, 2 360 millimeter radiators are supported on the top and front panel to keep the most extreme systems cool.
• Support for up to 7 120 millimeter fans and front, top, and rear liquid cooling ensure the utmost in performance.

User questions & answers

Question:	Is the PSU bay removable
Answer:	The shroud cannot come off
Question:	Does this have dust filters on front and top pane
Answer:	It has a magnetic filter on the top and a slotted folter on the bottom, The mesh in the front is such that a filter is unnecessary.
Question:	What is the max size of cpu water/liquid cooler can this case fit in
Answer:	It fits a 360mm up top. Tight, but fits. A giant CPU cooler or real tall, odd-shaped RAM (like Warhawk or Super Luce) will have interference. I lost rear exhaust fan doing it. A thinner one or smaller than a 120mm would work, but for what i had at the house, I didn't have one to fit with a 360mm up top.
Question:	Does the power supply shroud have mounts to put any intake fans to blow on the gpu
Answer:	No it does not, the fans on the front of the case supply airflow to the psu area as well as the video card heatsink area and is more than adequate, The shroud does however have mounting for 2 ssd's and great cable management for them.

Product features

Cooler Master MasterBox TD500 Mesh White

The MasterBox TD500 Mesh E-ATX PC chassis turns high airflow performance into an art form with a geometric, three-dimensional mesh front panel and a tempered glass side panel plausibly cut from crystal ore. Raw performance is powered by three pre-installed ARGB fans mounted in front to light up every intricate angle of its structure.

Polygonal-Mesh

Crafted from Cooler Master’s Fine Mesh technology, Polygonal Mesh features a three-dimensional contour and is also capable of simultaneously providing high airflow and dust filtration.

Crystalline Tempered Glass

A crystalline design spans the edges of the tempered glass side panel, precision-engineered for strength as well as aesthetics.

Triple ARGB Fans

Three addressable RGB fans flood the Polygonal Mesh front panel with lighting while providing considerable airflow to the system.

Optimized Airflow

Open Airflow design, Fine Mesh front and top panel supporting up to seven 120mm fans and 360mm radiator.

Roomy Interior

The spacious interior fits all standard ATX and Micro-ATX motherboards configuration. Support for up to a 410mm graphics card, a 165mm CPU cooler, and up to a 180mm PSU in length provides room for upgrades.

Product description

The V250 Tempered Glass ARGB Mid Tower Chassis is the newest member of Thermaltake V Series chassis. Its three preinstalled 120mm 5V ARGB front fans can be controlled via the motherboard synchronization software or the RGB switch on the top of the I/O port. Other outstanding features include a 4mm tempered glass panel and full-length PSU cover for overall exceptional overall performance which is ideal for both gamers and enthusiasts. P/N: CA-1Q5-00M1WN-00SERIES: V SeriesMODEL: V250 TG ARGBCASE TYPE: Middle towerDIMENSION (H X W X D): 430 x 216.5x 477 mm (16.9 x 8.52 x 18.78 inch) NET WEIGHT: 6.06 kg / 13.36 lbsSIDE PANEL: 4mm Tempered Glass x 1COLOR: Exterior & Interior: BlackMATERIAL: SPCCCOOLING SYSTEMFront (intake): 3 x 120 x 120 x 25mm Addressable RGB fan (Fixed 1000rpm, 27.2 dBA) Rear (exhaust): 1 x 120 x 120 x 25 mm fan (Fixed 1000rpm, 16dBA) DRIVE BAYSACCESSIBLE: 2 x 3.5” or 2 x 2.5“HIDDEN: 2 x 2.5” EXPANSION SLOTS: 7MOTHERBOARDS: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) I/O PORT: USB 3.0 x 1, USB 2.0 x 2, HD Audio x 1, R Button x 1PSU: Standard PS2 PSU (optional) FAN SUPPORTFront:3 x 120mm, 2 x 140mmTop:2 x 120mm, 2 x 140mmRear:1 x 120mmRADIATOR SUPPORTFront: 1 x 360mm, 1 x 280mmTop: 1 x 240mmRear: 1 x 120mmCLEARANCECPU cooler height limitation: 160mmVGA length limitation: 320mmPSU length limitation: 160mm (With HDD Rack) 200mm (Without HDD Rack).

• [LIGHT UP THE SYSTEM] - 3 Pre-installed 120 millimeter 5V Motherboard Sync ARGB fans (Sync with ASUS, Gigabyte, MSI, ASRock, Biostar that has 5V addressable RGB header)
• [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software
• [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color)/ Radar mode (Red yellow green Cyan blue White Purple)/ Breath mode (8 Colors)/ Full Lighted mode/ Single Color mode (7 Colors)/ Light Off
• [CLEAR VIEW OF PC GAMING] - 4 millimeter thick Tempered Glass Side panel with standard mounting
• [FULL LENGTH PSU COVER] – Providing plenty of space to tuck away cables, while keeping airflow clear for your hard drives and PSU
• [DRIVE BAYS] - 3 x 2. 5" + 2 x 2. 5"/3. 5"
• Supports Mini ITX, Micro ATX, and ATX motherboard

User questions & answers

Question:	How noisy is the fan
Answer:	Actually fairly quiet
Question:	Just got the thermaltake view 37 argb and was wondering if there is any way to control the two front fans and rear fan speed
Answer:	I see this is an older post, so my answer may be a little late - but figured it wouldn't hurt to share: Per the documentation, it says the three preinstalled 120mm 5V ARGB front fans can be controlled via the motherboard synchronization software or the RGB switch on the top of the I/O port.
Question:	Is it supposed to have motherboard screws? Because mine didn’t
Answer:	Mine did not either. Also, documentation was extremely lacking on how to use the other cabling that was provided with the case.
Question:	Does anyone know where to find these motherboard screws
Answer:	Amazon has plenty of cheap screw sets for PC's

Product description

The CORSAIR iCUE 4000X RGB is a distinctive and customizable tempered glass mid-tower ATX case with easy cable management and exceptional cooling. Two tempered glass panels and dedicated front ventilation channels combine to offer great looks and airflow, accompanied by three included 120mm AirGuide RGB fans that concentrate cooling and illuminate your system. CORSAIR RapidRoute design makes it effortless to route major cables through a single channel.

• Combining stylish tempered glass, customizable RGB lighting, innovative cable management and concentrated airflow, choose the 4000X RGB for a unique high-performance PC.
• Show off your components and RGB lighting with tempered glass side and front panels, built with dedicated front ventilation channels for ample airflow.
• The CORSAIR RapidRoute cable management system makes it simple and fast to build an immaculate, professional-looking system with major cables neatly routed through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables.
• Includes three CORSAIR 120mm AirGuide RGB fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling. Each fan is equipped with eight individually addressable RGB LEDs for brilliant customizable lighting.
• Fully control and synchronize the RGB lighting for up to six fans with the included iCUE Lighting Node CORE and CORSAIR iCUE software.

User questions & answers

Question:	Soporta 360mm
Answer:	Si, en la parte Frontal. En la parte superior solo soporta hasta 280mm
Question:	How do i get the fan to turn on? only the rbg is
Answer:	Please make sure the fan is also connected to a fan header on your motherboard. If you require any assistance please feel free to contact support via our website and we'll gladly assist you.
Question:	What is the difference between the 4000d and 4000x
Answer:	The 4000X has a transparent front panel that allows you to see the RGB lighting of your fans.
Question:	Does it come with rgb fans
Answer:	The 4000X RGB comes with 3 SP Elite RGB fans. The 4000D airflow comes with 2 AirGuide fans.

Product features

TEMPERED GLASS SIDE AND FRONT PANELS

Show off your components and RGB lighting, with dedicated front ventilation channels for ample airflow.

RGB LIGHTING OUT OF THE BOX

Fully control and synchronize the RGB lighting for up to six fans with the included iCUE Lighting Node CORE and CORSAIR iCUE software.

ALL THE STORAGE YOU NEED

Fits up to 2x 2.5in SSDs and 2x 3.5in HDDs, with relocatable SSD trays that can be moved to the front PSU conver.

Product description

The Fractal Design Define R5 is the next evolution in the widely popular Define Series. Packed with intelligently designed enthusiast-oriented features delivering a silent case with powerful and expansive air and liquid cooling support, presented in a stunning Scandinavian inspired construction. The Define R5 case reaches the highest level of silent computing through strategically placed dense sound-absorbing material, ModuVent fan vent covers and finely tuned Dynamic Series fans. The Define R5 was designed with configurability in mind, accommodating up to 8 hard drives and all modern graphics card. Should you wish to expand your system with water cooling components or more fans the layout can easily be configured to meet your demand.

• Optimally designed for silent computing with high density noise-reducing material throughout the case for maximum sound absorption, while not compromising on airflow and cooling capabilities
• Extensive water cooling support for a case of this size; housing radiators up to 420mm in the top and 360mm in the front
• Newly, configured front door with dual side mounting to better fir your work space
• Highlighting 2 dedicated SSD mounts cleanly placed behind the motherboard tray that feature innovative new brackets delivering a tool-free installation and removal
• The HDD cage system holds up to eight 3.5" or 2.5" drives and is more adaptable than ever, allowing the user to modify the case layout according to personal preference with more places to relocate the cages
• Sturdy metal HDD trays provide excellent dampening features for the hard drives while providing better airflow through the cage with an updated, more open design
• The new and innovative Quick Release System on the left side of the case provides secure mounting of the left side panel, yet grants quick and easy access to the system.

User questions & answers

Question:	Does it come with screws
Answer:	Yes, it comes with all the standard computer screws assuming it's in the original unopened packaging from Fractal Design. If you're buying a returned package or used item then it may be missing some screws.
Question:	Do I need any particular tools to build a PC with this case
Answer:	At most a phillips screwdriver. This is the best designed case I think I've ever had. 100% modular. You can place the PS on all four corners (top and bottom). Both side panels come off easily and the off side has places to mount multiple SSDs so they are away from the heat, and a place to easily run the power cables. Al six sides can host multiple fans up to 140mm in size. Tons of room.
Question:	how many 5.25 inch and 2.5 inch dvd/bd or card reader drive slots are in the front
Answer:	There are two 5.25 inch bays but you'll need an adapter If you want to use one for a 2.5.
Question:	How many fans are included and what sizes are they
Answer:	Case comes with 2 140 mm fans,one mounted in front,one mounted in rear. I moved the one from rear to front, use 120mm radiator in rear w/120 mm fan and added another 120 mm fan in bottom between psu and hdd rack, running nice and cool with amd 9370 and gtx 970.and quiet!

Product features

Fractal Design Define R5 - Mid Tower Computer Case

The R5 is packed with intelligently designed enthusiast-oriented features delivering a silent case with powerful and expansive air and liquid cooling support

• Optimally designed for silent computing with high density sound-dampening material
• Extensive water cooling support for a case of this size
• Equipped with tool-less ModuVent fan slot covers

Key features

• Optimally designed for silent computing with high density sound-dampening material throughout the case, while not compromising on airflow and cooling capabilities
• Extensive water cooling support for its size; housing radiators up to 420 mm in the top and 360 mm in the front
• Equipped with new tool-less ModuVent fan slot covers allowing the user to install more fans if desired or keep fan slots covered to maximize sound absorption
• Including two Fractal Design Dynamic GP-14 140 mm fans developed for superlative airflow while still maintaining low noise levels
• Three-speed fan controller is strategically integrated in the front panel and supports up to three fans

Storage features

• Two dedicated SSD mounts cleanly placed behind the motherboard tray, featuring innovative new brackets for tool-free installation and removal
• The HDD cage system holds up to eight 3.5” or 2.5” drives and is more adaptable than ever, allowing the user to modify the case layout according to personal preference with more places to relocate the cages
• The ODD cage can easily be removed to gain additional interior space; the area can be freed up to allow for increased airflow, to provide a new place for HDD cage mounting or to make more room for water cooling components.
• Sturdy metal HDD trays provide excellent dampening features for the hard drives while providing better airflow through the cage with an updated, more open design

Product description

The Master Box Q300L is your straightforward option in the lineup of the brand new Master Box Series from Cooler Master. A Series that might be small in size but excels in functionality and modularity without compromising on the thermal performance. Although the size wouldn't tell, the Master Box Q300L supports a standard ATX PSU which we don't see often in the market with this size. Based on the different system setup, the I/O panel can be adjusted to six different locations, three options at each side of the case. You can decide which setup fits your system best. Due to the cube design of the frame and special pattern design on the magnetic dust filter will make the chassis stand out from the rest. The combination of a practical design and the unique customizable outlook makes the Master Box Q300L The perfect choice for office and home.

• I/O panel can be adjusted in 6 different locations and the Case can be positioned: Vertical or horizontal
• Edge to edge acrylic transparent side panel offers a full view inside
• Body depth height: Can support normal size ATX power supply
• Front magnetic design dust filter with open perforated front, top and bottom for high air performance
• Extra space behind the motherboard tray for hidden cable management

User questions & answers

Question:	Will the asus geforce gtx 1060 3gb dual-fan oc fit in this case
Answer:	According to the Asus website, the dimensions for that card are 24.2 x 13 x4.3 Centimeter I'm currently using a Zotac 1060 6GB AMP! Edition, whose dimensions are 210mm x 121.8mm x 37mm The ASUS card is about an Inch longer, but there is WAY more than enough room in the case to fit the ASUS card.
Question:	can it fit a normal ATX power supply
Answer:	Absolutely will fit any ATX power supply. I'm using thermaltake smart series 500w rgb.
Question:	I've seen photos of the handle (from a Q300P) being attached to the center of the top panel of this case. Is this possible
Answer:	You can remove the plastic bit that has the cooler master logo on it and install handles on the case like the Q300P
Question:	Is this case wide enough to support a cooler master hyper 212 evo
Answer:	I know what the official CM specs are, but I think it will fit. This guy installed a taller cooler with its cover and it fit. https://www.vortez.net/articles_pages/cooler_master_masterbox_q300l_review,8.html

Product features

MasterBox Q300L

The MasterBox Q300L is your straightforward option in the MasterBox Q-series from Cooler Master, a series that might be small in size but excels in functionality, modularity, and thermal performance. The combination of a practical design and the unique customizable aesthetic makes the Q300L the perfect choice for office and home use.

System Flexibility

6-orientation I/O panel—both sides: front, top, and bottom.

Edge-to-Edge Acrylic Side Panel

Show off your build through the full-size transparent side panel.

Clean Routing Space

28 mm of open space for hidden cable management.

Small Form Factor, ATX PSU Support

Despite the Micro-ATX form factor and the body depth/height of only 370 x 370 mm, the Q300L can accommodate a normal ATX PSU.

Product description

The Cooler Master HAF XB EVO takes the famous high Air Flow Series to a revolutionary new form factor with extreme cooling performance. The removable horizontal motherboard tray and large mesh top and front panels with two 120mm trifle front fans create a powerful front to back airflow. There is plenty of space for even the tallest high Performance tower heat sinks, thick liquid cooling radiators and up to 3 of the high-end graphics cards. A case quickly and easily transforms into a test Bench. C ideal for enthusiasts and over clockers. Two durable trifle fans included in the front (also supports a 240mm radiator) for powerful airflow. Supports a tower CPU coolers up to 180mm tall and high-end VGA up to 334mm long. Supports up to 4 HDD or SSDs by removable HDD cages. Motherboard tray can be removed to install, remove or swap components. Dual USB 3. 0 Super Speed ports and X-Dock slots in the front for Lightning fast plug-n-play I/O. Rigid carry handles on the side panels.

• A case quickly and easily transforms into a test bench ideal for enthusiasts and over clockers
• Two durable trifle fans included in the front (also supports a 240 millimeter radiator) for powerful airflow
• Supports a tower CPU coolers up to 180 millimeter tall and high end VGA up to 334 millimeter long
• Supports up to 4 HDDs or SSDs by removable HDD cages
• Motherboard tray can be removed to install, remove or swap components
• Dual USB 3.0 SuperSpeed ports and X dock slots in the front for Lightning fast plug n play I/O
• Rigid carry handles on the side panels

User questions & answers

Question:	Does this come with a power supply? If not, what would be recommended
Answer:	Does not come with a power supply, but it's very flexible. Just make sure if you get an ATX motherboard that you get an ATX power supply (or micro, mini power supply). I'm using a non-modular that will require a lot of cable hiding, but there's plenty of space to hide cables out of the way.
Question:	Can someone give me the exact specs to this case like width length and hight and also how much room is there for a CPU cooler
Answer:	Everything you request is listed in the manufacturer's info above for the Cooler Master Cosmos II, but some of it conflicts with these answers. For example, CPU cooler height is shown as 190mm/7.48" (not 6.5mm/2.5"), which is more consistent with the large size/width of the case itself. It seems like these comments are not all about this case, so I suggest anyone considering it do his/her own research.
Question:	To anyone who built in this case, and installed a non modular psu, how was it? I was thinking about buying a non modular sfx
Answer:	I did. A PC&Power Cooling 1KW SR PSU that's about 12-15 years old and still going strong. The unused cables, just folded each cable and zip ties them and tucked them behind it. The PSU is huge too. It almost reaches the bottom HDD cages. Another benefit of this case as it won't fit in a lot of cases.
Question:	Can this support three(3) red LED 80 mm fans? thanks
Answer:	I believe it will only support two 80mm in the lower rear section of the case. The other rear fan on the upper section is a 120mm fan, as are the front two (or four if you double up with a radiator.) There is also a 240mm fan mounting on the top.

Product features

HAF XB EVO

The Cooler Master HAF XB EVO takes the famous High Air Flow series to a revolutionary new form factor with extreme cooling performance. The removable horizontal motherboard tray and large mesh top and front panels with two 120mm XtraFlo front fans create a powerful front to back airflow. There is plenty of space for even the tallest high performance tower heatsinks, thick liquid cooling radiators and up to 3 of the high-end graphics cards.

Product description

The Master Box NR600 applies optimal cooling and expandability to a minimalist, subtle design. With thermal capability at the forefront of features, the front panel and top panel are designed to signify airflow performance in its purest form.

• Minimalistic mesh design - Elegant design elements are applied to mesh for optimal thermal performance.
• Optimal thermal performance – the full mesh front panel and ventilated top panel provide a high potential for thermal performance.
• Flush Tempered glass Side panel design – The tempered glass Side panel, fastened by thumbscrews on the rear panel, keeps the surface flush and unobstructed.
• Graphics Card support up to 410 millimeter – Generous clearance space is provided to support the latest graphics cards.
• With/without ODD support – depending on preference, an odd version of the chassis is available. If an odd is not preferred, a cleaner appearance and more cooling options on the top and front panels are supported.
• Headset jack – the single 4 pole headset jack features both Audio and microphone capabilities simultaneously so that separate jacks are not needed.
• Cable management – high quality, longer length rubber grommets and generous clearance behind the motherboard offers ample room for cable management.

User questions & answers

Question:	Does this case have a removeable psu shroud
Answer:	We advise only using the remote that comes with this fan.
Question:	will a mini-itx motherboard fit this case
Answer:	This ceiling fan is damp location rated only and not wet location rated.
Question:	Will this fit noctua nh-d15 cpu cooler fan and have enough clearance
Answer:	120V
Question:	Triple fans included
Answer:	The manufacturer recommends using a 24" downrod for a 12 foot ceiling.

Product features

MasterBox NR600

The MasterBox NR600 applies optimal cooling and expandability to a minimalistic design. With thermal capability at the forefront of features, the front panel and top panel are designed to signify airflow performance in its purest form.

Functionality is blended to a compact design by maximizing use of internal space and implementing subtle design elements. The MasterBox NR600 features a tempered glass side panel, fastened by thumbscrews on the rear panel, to keep the surface immaculately flush.

Flush Tempered Glass Side Panel Design

The tempered glass side panel, fastened by thumbscrews on the rear panel, keeps the surface flush and unobstructed.

Optimal Thermal Performance

The full mesh front panel and ventilated top panel provide a high potential for thermal performance.

Fan and Radiator Support

Support for the following fan/radiator form factors: FRONT 120/140/240/280/360 mm radiator, 120 mm x 3 fans, 140 mm x 2 fans, TOP 120/240 mm radiator, 120/140 mm x 2 fans, REAR 120 mm radiator, 120 mm x 1 fan.

Dual Audio-Microphone Headphone Jack

The single 4 pole headset jack features both audio and microphone capabilities simultaneously so that separate jacks are not needed.

Drive Bay Support

Supports 4 x 3.5" HDDs and 5 x 2.5" SSDs.

Component Clearances

Supports GPUs under 410 mm, CPU coolers under 166 mm, and PSUs under 180 mm.

• 【Motherboard Support】E-ATX, ATX, Micro-ATX, mini-ITX
• 【DUST-PROOF Design】 The upper and lower parts are equipped with dustproof filters, which can effectively prevent dust from entering the case and keep it fresh and cool.
• 【HONEYCOMB OPTIMIZED AIRFLOW】6 MVP 120mm RGB Dual light loop LED Fans pre-installed in this pc gaming case: 3 x Front, 2 x Top, 1 x Rear; up to 360mm long liquid-cooling radiator at front(optional). You can change the color and mode of the light through the RGB button.
• 【TEMPERED GLASS PANELS】To level up gaming experience for users, 903-S6 is equipped with 2*4mm thickness translucent Tempered Glasses in Galaxy Dark, which gives you a visible view of colorful RGB case.
• 【TOP I/O PANEL】1 x USB3.0 Port, 2 x USB2.0 Port, 1 x HD Audio, RGB Button, Power/Reset.

User questions & answers

Question:	Will it diliver to india
Answer:	It sho wil diliver india
Question:	The ad says the fans are 12v so i got a 4 pin 12v mobo and when it got here it says warning 5v 3 pin .... can i make this work
Answer:	The fans come plugged into a hub in the back of the case whenever it arrives, then you give power to said hub with a SATA power connector from your power supply. So, there's no need to plug them into the motherboard unless you would want to for some reason.
Question:	Rgb light reset after shutdown how to make it stay to my last light option
Answer:	You cannot, it does not have a memory module to save the setting.
Question:	would a msi proseries intel coffee lake h310 lga 1151 ddr4 d-sub dvi hdmi onboard graphics micro atx motherboard (h310m pro-vdh plus) fit
Answer:	You can go to pcpartpickers website and go to system builder and it will tell you the compatibility of all the parts you want to put in your computer

Product features

The Professional Detail Design

Complete with metal mesh on the left and right side of our unique honeycombed front panel for optimal air intake and dust proof.

Smart Mid Tower Case

Ordinary size which meet most gamers' DIY needs.

MVP SPORT RGB FANS

RGB fans with 7 colors split between two separate light loops allow for nearly endless customization.

Ample Airflow

Keep cool with 6 x 120mm RGB fans included.

Cable Management Made Simple

Cable routing channels with included velcro cable straps for clean cable management.

Remarkable Expansion

Support motherboards up to E-ATX ,ATX, Micro-ATX, Mini-ITX; mount for up to 3 x 3.5”HDD’s and 3 x 2.5”SSD’s.

Excellent Dust-Proof Design

Two removable dust filters on the top and bottom, achieve 100% ideal dust-proof.

Front & Rear

Show case your RGB lighting with a fully transparent tempered glass in the front.

7 Expansion slots in the rear.