12 best pac bluetooth adapters

Product description

The BluJax is designed to connect to the auxiliary audio input of your vehicle or home stereo, and provide a Bluetooth connection for streaming your music wirelessly. The Built-in button provides wireless control of the paired Bluetooth device, providing the ability to play, pause, and skip tracks.

• Compatible with iPod, iPhone, iPad, Android, or windows phones and tablets
• Compatible with standard 3.5mm aux audio inputs found on many audio systems
• Stream music wirelessly
• Control your music playback wirelessly

User questions & answers

Question:	How pair with my phone
Answer:	It uses 5 volts from a mini USB connection, like a cell phone. So, if you plug a little USB adapter into an electrical outlet and use the supplied cord, it will work. By the way, it is a very nice item.
Question:	How long can it play from a single charge
Answer:	A good hour or two
Question:	how far away can you be while the music plays
Answer:	Dear customer,you can press the number key to get station 99.1.Just press the number 9,9,1 and it can go to the station 99.1 directly.If you have any other question,please click this lin http://www.antimitec.com/support/ or contact [email protected] you！-Antimi Service Support
Question:	Can this be charging while in use
Answer:	This unit failed after one use and would not recharge or respond. Do no purchase.

Product description

Connects to the 9-PIN auxiliary input port on the back of the factory radio. Provides two pairs of stereo inputs. Requires factory auxiliary source such as a console or dash mounted cassette, CD player or console mounted CD change

• Auxiliary Input for GM 9 Pin Connector behind Radio
• Plug and Play to Factory Radio
• Gives Direct Audio Input to the Factory Radio
• Can only be used in vehicles equipped with a factory slave unit (external CD player, or external single CD player
• Auxiliary Audio Input Interface for 1995 - 2002 GM Vehicles
• Allows Direct Interface of Any Pre-amp Level Audio Source to a GM Factory Radio
• OnStar Ready. When OnStar is Initiated the Auxiliary Audio Inputs Are Automatically Over-ridden to Allow OnStar Audio to be Heard

User questions & answers

Question:	Would this work on a 2000 Silverado that only has one CD player in the main stereo
Answer:	I usually can get around 5 or 6 hours off a single charge, charge time about an hour depending on the output of your charging block.
Question:	Is there a way to diagnose the unit to see wether it is a bad unit or a bad switch
Answer:	I don't know I always use it while I'm driven with my iPhone in the car
Question:	I have a 2000 Camero Monsoon single disc in radio with plug in rear for multi disc player. Will this work plugged into 9 pin without other unit
Answer:	Yes
Question:	Is there included in the package a wiring harness with a Y configuration, that allows me to keep my remote 9 pin CD player connected
Answer:	Normally, this speaker is compatible with a new iPad Pro.

Product description

3.5 Audio Input

• Dash mountable 3.5mm audio input port (male to female)
• 3.5mm to 3.5mm (male to male) interface connection cable
• 3.5mm to stereo RCA adaptor cable
• The low profile auxiliary input keeps factory look to vehicle interior. Connector labeled "AUDIO INPUT." Connects to most audio sources.

User questions & answers

Question:	I have a 2003 pt cruiser with a stock radio / no aux input and want to add one so that I can use my cell phone to stream music. Is this what I need
Answer:	Prob a switch. Mine was junk out of the box.
Question:	Would it work on a 2005 Altima
Answer:	Hi! Maybe this Link Help you: http://www.crutchfield.com/S-f4guCNXxMut/learn/1997-2002-chevrolet-camaro.html The Radio looks like the one in my 1999 Chevy Blazer. There it works finde. Plug and Play . Hope i could Help you.
Question:	will it hook up to the factory 6 disk cd reciever
Answer:	The unit plugs between your remote located cassette or CD player. My truck has a 9 pin tape player which still works with this unit installed.
Question:	Does this item come with all the parts needed for installation? Are there any adapters or cables that need to be bought to complete installation
Answer:	Push the blujax button then search for Bluetooth on your phone

Product features

iSimple Dash Mountable Auxiliary Input Adapter

-Dash Mountable Auxiliary Input Adapter.

-Provides an AUX input just about anywhere inside your vehicle.

-Eliminates the need for messy tangled cables for a more professional clean factory look.

-Easy to install and small 3/8" needed for insertion.

-Will connect just about any audio source.

-Includes 3.5mm to RCA adapter.

-3.5mm to 3.5mm audio cable also included.

-Will extend auxiliary input if need or if AUX input is in odd location.

-Will provide reliable audio with a secure connection.

-Labeled 'Audio Input' for mistake-free installation.

-Can be drilled anywhere for maximum convenience.

Product description

Fm Modulator, Usb Charging W/ 3.5 Audio Input

• Charges any USB device (excluded iPad)
• 3.5 audio support
• FM modulator included

User questions & answers

Question:	Does this work for a 07 mb s
Answer:	If your radio has rca inputs this will work.
Question:	Does this come with the power switch
Answer:	If the CD player has a 3.5mm auxiliary output port, then yes it would.
Question:	It looks like their is a yellow "on/off" switch on the device. Is that what it is? If not, where would the "on/off" switch be installed
Answer:	This item alone will not allow you to play your MP3 thru your car's factory stereo. These cables only provide the port to plug your MP3 into. An auxilary input device is needed to connect between your car's factory stereo and these cables to make your MP3 work thru your car's stereo.
Question:	I intend to install it on my 2006 Honda odyssey, do I need an antenna adapter for it
Answer:	As is clearly stated, this is for stereos that have a remote CD player. It works great in my 1999 Tahoe that has a cassette player in the head unit, and a separate CD player in the dash close by.

Product description

Play music through your stereo with this iSImple BluJax 3.5mm Auxiliary Input Bluetooth Adapter for Music Streaming. The BluJax is an easy and uncluttered way to play music through a standard aux input. Simply plug it into the aux input of any car and play music from any smart device. The BluJax only requires pairing the first time—each use thereafter will reconnect automatically. Battery life is in excess of 8 hours.

• Connects to aux audio input of vehicle or home stereo to provide Bluetooth streaming
• Built-in button provides wireless control of paired Bluetooth device
• Functions include play, pause & skip tracks
• When paired smartphone leaves range, device goes into power-saving, battery-extending sleep mode then wakes when center button is pressed

• ⭐ This Bluetooth Media Button allows you to control music at your fingertips with a single press when your smart phone / tablet is out of your reach
• ⭐ It's a media control button that allows you to play or pause music, skip back or forward a song, increase or decrease the volume of your media. It also has power saving mode, if you do not touch it for about 2min, the button will turn off automatically and you need to press the button twice to reconnect
• ⭐ Use the included mount to attach the Media Button to your steering wheel or onto bicycle handlebars, allowing you to keep your eyes on the road and your hands on the wheel
• ⭐ Convenient to use, small and compact, the wireless Bluetooth range is up to 40 feet. CR2016 battery is projected to last at least 1 year. Come with a strap, you could freely take it anywhere you go
• ⭐ Compatible with most of iOS devices supporting Bluetooth 3.0 and later (support iPhone 7 and iOS10), Android OS 4.0 or later

User questions & answers

Question:	Will this work with Apple car play
Answer:	Yes the power switch controls the input from fm to aux plug .USB has power when vehicle is onever thing powers down when vehicle is off
Question:	I'd like to pair this with an ipad mini model a1432. the specs for the mini say it is compatible with bluetooth 4.0. will it work with my ipad mini
Answer:	Yes, it is but the picture is of an old model and is now black on off. Looks like an on off from a ps2 but is still in the same location. I just leave it on all the time and have never had a battery problem from my car.
Question:	is it compatible with galaxy tab A
Answer:	Metra 40-HD10 I believe is the adapter for 05 and up vehicles.
Question:	Is this waterproof
Answer:	I was in the same boat, just with a 2005 Toyota Matrix. I can't say anything about your car specifically but I was able to disconnect my stock stereo, hook up the adapter to the back of the radio and that, to make a long story short, was all it took. I, of course, used a drill-bit to carve out a small hole to fit the actual aux port in the dash but it works perfectly with no issues. There was no settings or installation (outside of the aforementioned steps) needed. I just press the CD button to switch back and forth between CD's and the Aux. I would highly recommend this product if you know it will work with your car. I was able to confirm this for myself by watching a youTube video.

Product features

One-touch Intellgent Control

This Bluetooth Media Button allows you to control music at your fingertips with a single press when your smart phone / tablet is out of your reach.

Bluetooth Media Button

It's a media control button that allows you to play or pause music, skip back or forward a song, increase or decrease the volume of your media.

Warm Note

This item DO NOT support MIUI system, including all Xiaomi phones, tablets and other Xiaomi devices.

Product description

Simple and easy wireless connection of instruments with MIDI IN/OUT terminals to iOS devices and Mac makes it easy to use a wide range of music applications wirelessly for even more enjoyable performing and composing

• Wirelessly connect your iOS devices (iPhone/iPad/iPod touch) to your instrument
• Use music apps without cables and enjoy the freedom that wireless technology brings to your performances
• Simple and easy wireless connection of instruments with a 5-PIN DIN MIDI connection terminal to iOS devices and Mac
• Avoid having to reconnect every time you play; Customize digital drum kits using an intuitive app interface
• Charge your iOS devices (iPhone/iPad/iPod touch) while using apps and not worry about the battery running out. Note : Refer to the PDF attached below in Technical Specification for User Manual

User questions & answers

Question:	Can i only connect the midi in. what is the range? i want to use it as a wireless transmitter for a keytar, for live playing
Answer:	Yes.
Question:	can two of these adapters be used to connect two midi instruments to each other without an ipad or pc in the middle
Answer:	I would think so it is Bluetooth. I have it with both a apple 8 and pioneer motorcycle/marine radio paired simultaneously for riding the motorcycle with the handlebar attachment and it works very good. It does seem to turn off by itself or timeout a little quick if you pause to long but it might be operator error
Question:	how is it powered? Battery? How long does the battery last? What kind of battery does it take
Answer:	This is not waterproof.
Question:	Can i use this to connect midi keyboard to pc
Answer:	Sorry, I can't answer this question. May simply want to check with your mechanic. Easy to install and have not had any problems with it

Product description

. Connects to aux audio input of vehicle or home stereo to provide Bluetooth(R) streaming. Built-in button provides wireless control of paired Bluetooth(R) device;. Functions include play, pause & skip tracks;. When paired smartphone leaves range, device goes into power-saving, battery-extending sleep mode then wakes when center button is pressed;. Compatible with iPad/(R)iPhone(R)/iPod(R), Android(TM) or Windows(R) phones & tablets;. Compatible with standard 3.5mm aux audio inputs ;. Includes micro USB charging port & charging cable

• NEW
• ISIMPLE
• WARRANTY : ONE YEAR
• PET-AOAISBT32

User questions & answers

Question:	Can I make and receive phone calls
Answer:	You can, but you will need a CME WIDI BUD, which plugs into your PC and functions as a Bluetooth MIDI receiver.
Question:	Can you charge the isbt32 blujax an have it operating at the same time
Answer:	Yes

Product description

Simple and easy wireless connection of instruments with a USB to host terminal to iOS devices and Mac makes it easy to use a wide range of music applications wirelessly for even more enjoyable performing and composing.

• Wirelessly connect your iOS devices (iPhone/iPad/iPod touch) to your instrument
• Use music apps without cables and enjoy the freedom that wireless technology brings to your performances
• Simple and easy wireless connection of instruments with a USB to host terminal to iOS devices and Mac
• Avoid having to reconnect every time you play
• Charge your iOS devices (iPhone/iPad/iPod touch) while using apps and not worry about the Battery running out
• Hardware Requirements: iPhone/iPod touch/iPad with Bluetooth 4.0 installed

User questions & answers

Question:	I have the DGX660 with no midi port. The USB to host is my only option and AC USB adapter is required, is the adapter&cable included in the packages
Answer:	Yes. That is how I use mine. Otherwise the battery life is only ~6 hours.
Question:	Can this device be used to wirelessly connect my yamaha piano to av receiver ( which supports both bluetooth and airplay
Answer:	This sends midi out to a Bluetooth midi device like an iPad or a pc. I tried to use it with a key tar and since the Yamaha needs power from the midi plug, it didn't seem to really work well. I ended up returning 2 of these. Not the best product for the Keytar. It did work on powered keyboards though.
Question:	Does this work with non-yamaha midi controllers
Answer:	No, not unless one or the other instrument can run a virtual midi App. An app needs to be used to make the virtual link. There is no connect button or function on the midi adapter.
Question:	Can i connect the keyboard to bluetooth soundbar
Answer:	It draws power from the MIDI IN and OUT sockets of your instrument. No battery is required. However, I had to install the app namely "midimittr" to force my IPad Pro to regconize and wirelessly connect to my CVP-709. See more about the app on YouTube.

Product description

UD-WL01 is a USB wireless LAN adaptor that allows you connect your musical instrument to an iPhone/iPod touch/iPad and enjoy a range of Yamaha iOS Applications.



By connecting the UD-WL01 to the USB TO DEVICE terminal

of a compatible Yamaha product, you can enable wireless

communication between that Yamaha product and a computer or smart device, such as an iPhone or iPad.

• Compatible with Yamaha instruments: DGX-660, PSR-S Series, Motif, Montage, Tyros, CLP, and CVP
• Discover new ways to enjoy music using iOS Applications
• Insert UD-WL01 into USB TO DEVICE jack of your instrument
• Press and hold the WPS button on UD-WL01 for 3 seconds
• Press the WPS button on your wireless router. If your wireless router is not WPS-capable, please refer to the connection manual in the support tab

User questions & answers

Question:	Can you use this with yamaha cvp
Answer:	Your AV receiver will use bluetooth to receive audio information, but Yamaha's bluetooth MIDI adapters send MIDI data, not an audio signal. So no, you can't use this device to play sound from your piano through the receiver. However, there are audio bluetooth adapters that you could plug into the piano, and any of those would let you do what you want.
Question:	What exactly does this adaptor do
Answer:	I just got this. It works very well with my Williams Allegro (legacy). Wonderful item from Yamaha! So neat. No wire. No cord. And tonight I was able to record several midi files with almost no latency issues.
Question:	Can you use any wifi usb adapter to connect to the internet or does it have to be yamaha’s
Answer:	No. This is a MIDI adapter, meaning that it sends information about how the instrument it's plugged into is being played. You can use this to control a (bluetooth capable) MIDI synthesizer from your keyboard, or you can use it to let your iPhone or iPad control some aspects of your keyboard. Yamaha provides several different iPhone/iPad apps that can be used with its keyboards, and they communicate with the keyboards via MIDI.Your sound bar, on the other hand, expects to receive digital audio. This adapter and your sound bar do both use bluetooth, but they use it to send and receive different kinds of information. The difference between digital audio and MIDI is like the difference between playing a recorded song for someone and showing them some sheet music -- they're both music, but in very different forms that each have their own purpose.
Question:	Will it work with yamaha p
Answer:	No you cannot, only play music.

Product description

Link your smartphone to your vehicle’s factory radio for safe hands-free calling and high quality audio streaming. Car Connect provides wireless playback control from the OEM steering wheel controls. Calls and music are routed through the vehicle’s sound system for a great hands free experience. Compatible with Apple devices and Android devices. (select models equipped with Bluetooth)

• Vehicle MUST be either equipped with, or have the ability to support Satellite Radio
• 2012+ Avalanche, Sierra, Silverado Suburban, Tahoe & Yukon vehicles equipped with a navigation radio are not compatible
• Radio must be equipped with a "CAT" + "Band" button combination or "XM" button to be compatible
• Wireless control of music playback from steering wheel controls or OEM radio

User questions & answers

Question:	Is the unit totally incompatible with the '13 trucks equipped with the nav unit or will it work to an extent? And is there another solution to add BT
Answer:	It's a weirless accesspoint for the piano, enabled connecting with Ipad to the piano and control the piano from the Ipad with Yamha music application.
Question:	Will I still be able to use my XM radio with this
Answer:	It have to be yamaha’s the others don’t work
Question:	Will this work on a 2008 gmc yukon xl denali with navigation
Answer:	It works with P515
Question:	Can this replace the XM input for audio streaming. But still utilize built in bluetooth system for calls
Answer:	The USB cable to connect from DGX660 USB port (on back) to the UD-BT01 is included. No AC adapter is included. To power the UD-BT01, you just plug in to any AC USB adapter. I am using some left over Apple iPhone USB chargers, and they work fine. The unit plugs directly in to the USB port of the charger, and draws only 170mW (or less than 0.04A at 5V). So, if you have any leftover USB charges from old phones, any of them should work fine.

Product description

General Features: • Auxiliary Input Adapter for Select Ford, Lincoln, and Mercury Factory Radios • Convert 12-pin satellite/CD changer port of OEM radio to RCA level audio input • Plug and play installation maintains factory wiring integrity • Provides auxiliary audio input to factory radio • Direct audio inputs for excellent sound quality • Color: Black • Authorized Internet Dealer • 1-year Manufacturer's Warranty Kit Includes: 1. Auxiliary adapter 2. Wiring harnesses 3. Step by step instructions Compatibility: • Ford: o 2007-2010 Edge o 2007-2009 Expedition/Sport Trac o 2006-2009 Explorer/Fusion o 2004-2008 F-150 o 2005-2009 F-250/F-350/F-550/Mustang o 2005-2007 Focus/Freestyle • Lincoln: o 2006-2008 Mark LT o 2007-2009 MKX/Navigator o 2006 Zephyr • Mercury: o 2006-2009 Milan/Mountaineer

• Auxiliary Input Adapter for Select Ford, Lincoln, and Mercury Factory Radios
• Convert 12-pin satellite/CD changer port of OEM radio to RCA level audio input.Not compatible with:Navigation radios,Rear Seat Entertainment,Satellite Radio
• Plug and play installation maintains factory wiring integrity
• Provides auxiliary audio input to factory radio
• Direct audio inputs for excellent sound quality

User questions & answers

Question:	Where is the best place to connect the 12v constant? I have a 05 mustang with shaker
Answer:	Yes, your XM button will still appear. You will have full access to your XM channels. It's installed in my 2008 Chevrolet Tahoe LTZ that has the large factory Nav/DVD screen.
Question:	Is yours still working
Answer:	It should. Works on my Escalade - and if you to to their website, it has that as an approved vehicle. Just has to have the satellite radio functionality - which the nav radio should.
Question:	Would this work for a 2007 Ford F-150 and if so where exactly is this placed
Answer:	I have the unit in a 2008 Buick Enclave. It is a Bluetooth unit that streams thru the XM input. It can stream anything that is on your phone, such as music, podcasts etc. If you have a phone with Siri or Cortana, you can utilize the radio controls on the steering wheel to bring up those assistants to do whatever you want the assistant to do. Such as send a text, etc
Question:	WOULD THIS WORK FOR A 2006 F 150 KING RANCH
Answer:	Yes, per Yamaha CVP-700 series is designed to use it; Here is the list from the Yamaha web site: CLP-500 Series (excluding CLP-525) CLP-600 Series (excluding CLP-625) CVP-600 / 700 / 800 Series CSP-150 / 170 PSR-S670 / S775 / S975 YDP-184 P-515 DGX-660 Genos MOTIF XF 6 / 7 / 8 (Ver.1.50 firmware or later)