13 best mpow bluetooth car kit

Product description

3 in 1 : Bluetooth Receiver +Dual USB Car Charger + Ground Loop Noise Isolator



Mpow Bluetooth Receiver, Say "No" to Noise

Mpow sells Bluetooth receiver with bundling Ground Loop Noise Isolator, which helps decrease the buzzing noise some cars make while playing music, thus giving you the best music experience.



Bluetooth 4.1

Bluetooth 4.1 technology offers significantly lower power consumption and more stable signal transmission than previous versions, thus giving you a lossless audio transmission and crystal-clear phone calls and music.



Broad Compatibility

Works with almost all Bluetooth devices and all cars with a 3.5mm input. Stream audio through 3.5mm input in car stereo and enjoy your favorite music from phone/tablet/MP3.



Simple Operation

1. Fix the receiver on the best position of the car;

2. Connect the receiver to the Aux-in jack of the car stereo system;

3. Connect the receiver to the car charger;

4. Plug the car charger into the cigarette socket;

5. Pair the receiver to your smart device;

6. Adjust the car radio to Aux in mode;

7. Now you can enjoy your music through the car stereo system.



Multifunction Button

Quick Press: Answer or Hang up call

Long Press: Reject call

Double press: Redial the last call



Attention

Please use 5V standard charger to charge Mpow. Do not use quick charger/ flash charger/ fast charger for the output voltage is over 5V and may destroy your Mpow.

• WIRELESS MUSIC: Turn your wired headphones, speakers, home stereo systems, car audio systems into Bluetooth-enabled devices. Mpow Bluetooth Receiver with Ground Loop Noise Isolator and Dual Port USB Car Charger let you enjoy high quality wireless music from phone/tablet/MP3 and Stream audio through 3.5mm input in car stereo, such as music, GPS voice navigation, and podcast.
• NOISE ISOLATOR INCLUDED: Mpow Bluetooth receiver offers you 30 feet operation range with good performance, high-fidelity stereo music and clear speech. If you are bothered by the buzzing noise, you can use the NOISE ISOLATOR to enjoy CD quality stereo sound instantly.
• AUTO-ON & AUTO-CONNECT: The receiver part comes with a magnetic mounting base to be tightened on your phone. And the audio receiver will power on automatically when you start the car, then auto sync with the last connected phone (Note: Please make sure the Bluetooth of your phone is turned on before starting the car).
• DUAL-CONNECTION & HANDS-RELEASE CALLS: This Mpow car kits lets you connecting two Bluetooth devices at the same time so that you could switch the music between two phones casually. And Mpow music receiver built-in Mic allows you to make hands-release calls easily while driving.Answer phone calls and voice activates from Bluetooth-enabled phones while on the go. Just a single press.
• HIGH-SPEED CHARGER: 2 ports USB output, 1A output for the receiver and the 2.4A output for other devices, it can even charge your iPad at full speed.(Note: Do not charge under high pressure and temperature environment for the consideration of safety and product working life.)

Product features

Voice Control

1. Press the front button for 3 seconds to activate voice the assistant on your phone (including but not limited to Siri, Google Assistant, Cortana);
2. The Bluetooth adapter collects your voice commands through a built-in microphone;
3. Enjoy safe driving while having total hands-free operation.

Music Control

1. The buttons have slightly bulgy outlines, which is easy for you to press without looking at them;
2. You can fully control the music in terms of pausing, playing, volume, and tracks;
3. Tips for getting extra volume up: turn down the volume on the car stereo, and turn up the volume to the maximum on your phones.

Call Control

1. Join the hands-free calling experience through control phone calls without your phone;
2. The Bluetooth receiver offers full access to take/end/ reject calls, and redial the last call;
3. Built-in microphone ensures clear voice capture.

Product description

ARE YOU LOOKING FOR A PRESENT FOR BOTH PARENTS AND CHILDREN?*If your parents live in the countryside driving a vintage car, Mpow Bluetooth Music Receiver can help them stream music from mobile phone to car speaker and offer clear screen to show status of the receiver. *If your dad is a van driver, Mpow Bluetooth Music Receiver can bring him live music from mobile phone and offer one multi-function button to easily control calls and enjoy safe driving. A rewarding journey is round the corner. *If your baby girl or boy will go to high school and buy a second-hand and old-school car, Mpow Bluetooth Music Receiver can retrofit its stereo system, and your kid can enjoy the most popular music from mobile phone in the car with friends.Specifications:Bluetooth Version: V5.0Frequency Range: 2.4GHzBluetooth Mode: HFP/HSP/A2DP/AVRCPBluetooth Range: ≤ 33 feetOperating Voltage: DC + 5.0 VExternal Interface: 3.5mm audio plug, USB plugWhat's in the Box?1x Mpow Wireless Music Receiver1x Noise Isolator1x 3.5mm Audio Cable1x User Manual

• UNIQUE SCREEN: Mpow latest Bluetooth music receiver for car features a unique screen to display status of the receiver with different icons, such as paired device 1 & 2, play/pause, volume, and signal spectrum. The receiver（already connected to your car speaker) will automatically turns on and the screen will light up when your car is started.
• NOISE CANCELLATION: You can enjoy satisfying sound quality in most cases and can also be free from ground loop noise with the noise isolator.
• ONE BUTTON, MULTI DUNCTION: You can enjoy safe driving with the help of voice assistant to play music or guide your road without operating your phone when driving. It is convenient to use the multi-function button to control calls and music.
• BLUETOOTH 5.0 CAR KITS: The latest music receiver with Bluetooth 5.0 covers a transmission range of 33ft (10m) and hold strong connection.
• MULTIPOINT CONNECTION: The car adapter can pair with two phones at the same time with one source playing audio at a time. A 3.5mm audio cable included in the box works with most cars. "

User questions & answers

Question:	how good is the calling
Answer:	Depending on the rms this model has 1000rms you need to check how much rms both of those subs have together.
Question:	How doea the control piece with screen mount? Or does it
Answer:	It powers my type r 12 with ease and sounds nice doing it gain is up about half way, but Right nw the amp lights are dimming down on hard bass hits. I think I need to check n clean grounds and possibly upgrade to 100% copper 0 gauge power and ground wires. This amp is well worth the money, make sure you have your subs wired for 2ohms
Question:	Does the display show caller ID info for incoming calls
Answer:	Nothing is 100% waterproof.
Question:	What all does the screen display? The phone number or caller ID
Answer:	SoundsGreatUSA Says: Yes. It provides more than enough power for the average 12" sub.

Product features

Start Your Car to Light up Screen

The latest wireless receiver “MPOW BH489”will automatically turns on and clear screen will light up when your car is started.

Bluetooth 5.0 & 33 Feet Transmission Range

The receiver is equipped with Bluetooth 5.0, which covers a transmission range of 33 feet. You can pair your device with the receiver anywhere in your car.

Broad Application

The receiver is applicable for almost all types of vehicles, including autos, SUVs, MPVs, Vans and others.

Voice Assistants

Press the multi-function button for about 1 second to activate voice assistant on your phone, including Siri, Google Home, Alexa, Cortana, and others;

Enjoy safer driving with voice assistant which can help you perform a variety of actions, like playing music, answer questions, guide your road, etc.

Call Control

Stay focused on the road with the hands-free system by pressing the multi-function to answer/hang up/reject calls, and redial your last call.

During a phone call, you can switch the audio channel between MPOW BH489A and your cell phone by pressing the multi-function button for 2 seconds.

Music Control

The multi-function button under the screen can be easily touched without searching for them;

Easily and freely control the music in terms of playing, pausing, volume, and tracks.

Product description

Built-in Mic for Talk:

The built-in microphone extends Mpow Bluetooth receiver’s function so that it can not only transmit music but also answer phone calls or give commands to Siri without picking up the phone .



Automatic Reconnection:

After powered on Mpow audio receiver will automatically search and connect to the last connected phone or it will enter pairing mode when the Bluetooth of the last phone is unsearchable.



When Do You Need Mpow BH044 Bluetooth Adapter?

1. Own a non-Bluetooth speaker or headphones want a more affordable solution for wireless music transmission instead of purchasing extra expensive Bluetooth speaker or headphones.

2. Want to enjoy speakerphone calls liberating hands for other crucial tasks especially driving



How to Pair 2 Phones?

1. Power on Mpow Bluetooth receiver

2. Enable Bluetooth on the 1st phone search and connect to “Streambot Mini”

3. After pairing successfully disable Bluetooth on the 1st phone Mpow will enter pairing mode again.

4. air Mpow to the 2nd phone by the same way

5. After pairing successfully enable Bluetooth on the 1st phone click to connect “Streambot Mini” again

6. Now both 2 phones are connected to Mpow



Package Contents:

Mpow Bluetooth Receiver ×1

3. 5mm Metal Audio Adapter ×1

Micro USB Charging Cable ×1

3. 5mm Audio Cable ×1

User Manual ×1

• MPOW BLUETOOTH RECEIVER 5.0: Make non-Bluetooth devices become wireless.Latest Bluetooth 5.0 technology ensures a stable connection between your phone and the non-Bluetooth audio player (with 3.5 mm AUX port) like home/car stereo,wired headphones.
• MUSIC STREAMING & HANDS-FREE CALLS: Mpow 044 Bluetooth audio adapter provides about 10 hours nonstop wireless music streaming and 8 hours hands-free calls while driving, caring for your driving safety and get rid of long boring car trip.
• SUPPORT SIRI AND GOOGLE ASSISTANT: Mpow 044 supports voice commands to ensure safe driving.You can make calls, navigation instruction with intelligent Siri/Google Assistant and Enjoy complete voice-control while you driving.
• DUAL LINK: Try to pair 2 devices with Mpow 044 at the same time. While either of the devices is within the wireless connection range, Mpow 044 will automatically reconnect to it, saving you the paring steps on the phone.
• EASY OPERATION: The easy operation of Mpow 044 makes it an ideal driver’s choice.The handy buttons can offer full access to music and hands-free call controls, like track controls for music, take, end and reject calls,even voice assistant activating.

User questions & answers

Question:	Why does it keep beeping, I see on my phone it's at 30% battery on streambot mini but it beeps nonstop and shuts off after 5 minutes
Answer:	Yes, I believe MTX even packages this amp with some of their 4 speaker marine systems.Installation involves connect 2 of the 4 speakers to each of the 2 channel outputs.Also, all of the speakers would need to have 4 ohm impedance.
Question:	Can you charge and use this at the same time
Answer:	Thank you for the question here at Unhinged ATV. According to the manufacturer yes this Amp is a 2 channel AMP. If you have any additional questions feel free to let us know. Cheyenne Unhinged ATV
Question:	How does this charge? Does it come with a cable and adapter to plug into a wall socket
Answer:	Those subs probably have a real RMS rated of 500w or less. This amp will be fine for them. It puts out a CEA rated 1500w, so you're over powering them, but if you set your gain properly, you'll be fine. I drive a pair of 600w RMS 18s and they just get warm on this amp.
Question:	If I leave this plugged into my vehicle's charging port, will it automatically turn on when I start my car
Answer:	Yes

Product features

Mpow BH044 Bluetooth Receiver

1. Multifunction Button
2. Microphone
3. Next Track/V-
4. Previous Track/V+
5. USB Charging Port
6. Indicator Light
7. 3.5mm Audio Output Port

Wireless Connection

Mpow Bluetooth receiver turns the old audio player into a Bluetooth one, receiving and playing the music list from the phone. With built-in mic, it can also start Siri or make a phone call.

Upgraded Bluetooth Receiver

Mpow BH044 Bluetooth receiver adopted high-end CSR chip and upgraded Bluetooth version from BT4.1 to latest BT5.0, therefore sound quality and transmission stability have improved a lot.

Easy 2 Steps to Pair

1. Long press 3s to start Mpow

2. Turn on Bluetooth on the phone, search and connect to “Streambot Mini”

10 Hours Battery Life

Mpow Bluetooth adapter can be used for about 10 hours after a fully charge or be charged while using. The rest battery life is visible on the paired phone. It will power off automatically if unconnected with the phone for 5 mins.

10m/33ft Signal Range

Wireless connect and control the phone within 10m/33ft, play/pause, previous/next track, volume up/down, answer/hang up a call, enable/disable Siri.

Little Gift

Mpow wireless audio receiver can be a fine little gift for friends and families to enjoy wireless music anywhere and anytime. It is suitable for headphones, car stereos and speakers with AUX port.

Product description

It is time to turn your old wired devices into wireless ones with upgraded MPOW Bluetooth receiver, enjoying your wireless life freely!

Premium Sound Quality:

MPOW Bluetooth receiver uses updated wireless technology to adapt audio systems, which is featured with Bluetooth 5.0 and CSR core for premium sound quality and stable transmission. The small and lightweight device enables you to enjoy clear music freely and wirelessly.

Wide Compatibility:

Compatible with iPhone, iPod, iPad, Android Smartphones, Tablets, and other Bluetooth-enabled electronical Devices, ideal for any powered Car with AUX interface & Home Stereo Sound System and Speakers via the 3.5 mm audio cable/adapter.

Easy to Operation and Auto-repair:

Just switch on the key button, and plug in your devices without Bluetooth. Then pair on your smartphone and play the music. You don’t need to repair your devices every time, MPOW Bluetooth receiver can be repair automatically.

Specifications:

Connection Technology: Bluetooth 5.0 and CSR Core

Bluetooth Range: 66 Feet

Charge Voltage: DC 5.0V Usage Temperature: 0-45℃ / 32-113

Package Included:

1 × Bluetooth Receiver

1 × USB Charging Cable

1 × 3.5mm Audio Cable

1 × 3.5mm Male to Male Connector

1 × User Manual

• SOLID CONNECTION : Mpow Bluetooth audio adapter equipped with Bluetooth 5.0 technology and CSR chip to ensure instant pairing and maintains a strong connection up to 66 ft.
• AMAZING SOUND QUALITY: Thanks to the Bluetooth 5.0 Mpow can turn your older stereo into a nifty Bluetooth capable one. You can enjoy the Hi-Fi music streaming by connecting Mpow Bluetooth receiver to non-Bluetooth car/home stereos system.
• LONGER BATTERY LIFE: Enjoy wireless music for longer with this rechargeable wireless Bluetooth receiver's extended 12 hour battery life.
• EASY TO USE & NO CORDS: Simple button interface. Designed with ON/OFF slider switch for getting rid of long press. 3.5mm male to male connector to get rid of the wire bonds, but without compromising sound quality. Only you and music, pure and simple.
• WORKS FLAWLESSLY REGARDLESS OF DEVICES USED: With this sweet adapter you are able to enjoy the old stereo(such as car/wired speakers/wire headphones, etc) again with the modern "Bluetooth" tech through your cell phone.

Product features

Advanced Bluetooth 5.0 & CSR Chip

With the latest Bluetooth 5.0 & CSR chip, this Mpow Bluetooth receiver offers enhanced sound transmission, faster pairing, more stable wireless connection and wider compatibility with Bluetooth enabled devices.

We are making music playback and conversations smoother and clearer than ever. Make your lifestyle cool with Bluetooth 5.0.

Convenient Hands Release Calling & Voice Assistant

1. Built-in microphone for Hands Release calling
2. Supports voice assistant for match your smart life and safer driving.
3. Noise Cancelling microphone technology gives you a clearer phone communication.

Long Wireless Streaming Range

Stable and fast wireless signal transmission with Bluetooth 5.0 technology and CSR high efficient chip:

1. Music streaming from up to 66 feet+ away
2. Hands Release calls from 33 feet+ away

Long Battery Life

1. 12 hours of wireless music playing
2. 10 hours clear Hands Release calls

Note: In order to save power: The LED indicator turns off in 10 seconds after connected (but you can press any key to activate).

After 10 minutes, if there is no connection, it will automatically shut down, so you need to restart / boot to reconnect.

Easy to Use

1. Compact audio jack design for convenient use
2. Smooth slide switch for easy operation
3. Multi-Function Button for Play/Pause/Answer or End calls
4. Next/ Previous Track: Click one the “+”/ “-“
5. Built-in microphone for Hands Release calling
6. Round jade-like touch with white-loop LED indicator

Small and light design

Mpow Bluetooth Receiver is compact, wireless, and made to go with you anywhere to keep your music going on the move with no reduction in functions.

Product description

Mpow Bluetooth 5.0 transmitter receiver 2 in 1 Make every classic sound box, old TV, PC have Bluetooth function.



Recommended uses:

Bluetooth transmitter mode -> add Bluetooth function to your TV, PC, etc. Stream audio to Bluetooth headphones/ speakers.



Bluetooth receiver mode ->add Bluetooth function to a wired speaker, sound bar, home theatre etc. Receive audio wirelessly from any Bluetooth audio device. Such as Pc, mobile phone etc.



Doesn't out/ not recommended:



33feet coverage: but, your range will depend on your connecting device and other factors



multipoint support works best for same brand/ model of headphones. For Many headphones/speakers (such as Bose, Beats, Sony) are primarily for music, not watching TV and do not support low latency. In order to avoid lip-sync issues, your BT headset or speaker also needs to support the code of Low Latency. Please check with your device manufacturer to verify this. If not, the codec would be downgraded to aptX or even SBC, and you may experience the noticeable audio lag, It is not Bluetooth adapter's problem.



not recommend for streaming live music (while playing guitar, keyboard, electronic drums etc.)



when using the transmitter The TV internal speakers might not out or become muted. This is TV dependent.

• Low Delay: Bluetooth transmitter for TV supports aptX Low Latency for extra smooth listening. Bluetooth Receiver Supports aptX HD for enjoying cd-like music, stream audio from your phone to non-Bluetooth device(home stereo system, speakers).
• Bluetooth Technology 5 0: Bluetooth transmitter receiver equipped with the latest Bluetooth 5 0 and delivers a faster and more stable wireless connection. Built-in microphone, you can enjoy hands-free calling, pick up or hang up a phone call by click the play/pause button.
• 1 for 2 Connection: Bluetooth adapter can be paired with two Bluetooth receivers (like headphones) so you and your family can share high quality music or movie The aptX Low Latency techniques are available only when paired devices Also supported
• Update Old Stereo: Bluetooth receiver mode, connecting bluetooth receiver to non-Bluetooth music speaker, ideal for stream music from your phone to home or car sound system. Bluetooth transmitter mode, add Bluetooth transmitter function to old TV, PC, iPod,
• Warm Tips: Mpow Bluetooth transmitter receiver Built-in battery for up to 14 hours use Please charge it with a 5V standard adapter instead of TV's USB port

User questions & answers

Question:	Can this bluetooth 5.0 transmitter support two aptx low latency headsets simultaneously in aptx low latency mode for both
Answer:	Mine did not have a mounting bracket
Question:	Can it be plugged into an outlet all the time
Answer:	What are the specs, RMS, range output etc of both
Question:	Does this device support the AAC codec
Answer:	Thank you for the message here at Unhinged ATV. According to the manufacturer they have not dyno tested this amp however the engineers have tested them for accurate RMS Power which is comparable to the Dyno testing. If you have any additional questions feel free to let us know. Cheyenne Unhinged ATV
Question:	Why does this not reconnect to my hwadphones when i turn it back on. I have to try and repair like 10 times every time i turn it on in order to use i
Answer:	We sell the mtx mud 600.1 for a subwoofer

Product features

MPOW BH390A Bluetooth Transmitter Receiver

• As a Bluetooth transmitter, BH390A works by turning any non-Bluetooth audio source (TV, iPod, e-Book reader and Nintendo Switch/3DS into Bluetooth-enabled devices so that you can enjoy wireless audio with Bluetooth headphone.
• As a Bluetooth receiver, BH390A works by turning your non-Bluetooth audio devices (old speaker, wired headphone and car audio system) into Bluetooth-enabled devices so that you can play music or answer phone calls through your smartphone via Bluetooth.

Pairing to 2 Headphones

• In TX mode, MPOW Bluetooth Transmitter Receiver supports pairing to 2 heaphones simultaneously. Want to share a movie with your friend?
• Just connect MPOW with 2 Bluetooth headsets, and let movie begins.

Noise-Cancelling Hands-Free Calls

• Worry about lost sound quality or unclear calls?
• MPOW Bluetooth Transmitter Receiver adopts a premium CSR 8675 and cVc 8.0 noise reduction chipset in order to keep the authentic sound quality, delivering HD sound to your wireless device.

aptx-Low Latency

• Enjoy end-to-end audio transmission speed. In TX Mode, while you play games, the Low Latency delivers the smoothest and immersive audio for you.
• Note: this feature requires your headset supports Low Latency as well.

Authentic HD Sound

Mpow delivers HD music with Qualcomm chip, minimizing the loss of sound quality. You can have the wired authentic music quality in a wireless lifestyle, both in RX and TX mode

Extended Long Connection Range

• Having wireless freedom while you walk anywhere in the house. Mpow Bluetooth Transmitter Receiver offers up to 33 feet Bluetooth connection distance in an open space.
• Note: the range can be shortened by physical obstructions and wireless interference.

Easy Operation

Mpow Bluetooth transmitter receiver are quite easy to use. On the side of the product, you can see a switch. You can turn on different modes by pushing it to TX or RX. There is an LED light in the front button to indicate current mode: green means TX, blue means RX

Product description

Amazing Mpow Bluetooth Receiver

Mpow Portable Wireless Bluetooth Receiver is designed to provide a simple hands-free solution for answering and receiving phone calls while on the go.

If your car stereo has no Bluetooth function;or if you are wondering how to get your songs to your car stereo,Mpow Bluetooth Receiver is right for you with its easy installation and intuitive controls.So you can enjoy your personal playlist and favorite podcast inside your car and vehicle.

How to Use:

Note:The User Manual could be downloaded at the part of Technical Specification on the product listing page.

1.Power on/off

Power on:Press the multifunction button about 3 seconds until the blue and red indicator lights start flashing alternately.

Power off:Press the multifunction button about 3 seconds until the blue indicator lights goes off.

2. Connect the receiver to your car stereo

With the 3.5mm studio adapter or the 3.5mm audio cable to connect your car stereo and Mpow.(If no sound,please make sure it is inserted completely).

3.Pairing:

Before using the receiver first time,please be sure to have it fully charged

Connect Mpow with your car stereo

Press the multifunction button about 3 seconds until the blue and red indicator lights start flashing alternately

Turn on the Bluetooth function of your phone

Search for the Bluetooth devices and select “MPOW”

If there is needs a code,please enter “0000”

If pairing is successful,the blue indicator light would flash slowly

Remark:

It would connect the last connected phone automatically when it turns on.(Please make sure the Bluetooth function is on.)

The Mpow does not turn on automatically when your car is starting.You need to turn it on manually.

Safety First

For the consideration of safety, please kindly do not use it when it is charging.

• ADVANCED BLUETOOTH RECEIVER: Mpow Bluetooth Car Adapter is not only for car,it is also could connect with your wired headphones via 3.5mm audio cable/adapter to help you enjoy the wireless Bluetooth headphones.
• DUAL CONNECTION: Mpow could connect two Bluetooth devices at once and the Bluetooth range up to 30 feet in open space without obstacles.
• EXTRA-LONG PLAY TIME: Built-in battery provides up to 10 hours’ play and talk time, 120 hours’ standby time, only takes 1.5 hours to fully charge it.（NOTE:Please be sure the charging input voltage to Mpow do not over 5V and do not use fast charger.）
• EASY CONTROL: You can answer phone calls or control music on the receiver. Change volume, play/pause/skip music, answer calls, redial the last called number with ease.( NOTE: This receiver doesn't turn on automatically with your car.)
• WIDE COMPATIBILITY: Compatible with most Bluetooth enabled devices like smartphone, MP3, tablet, etc, ideal for home or car audio systems.(NOTE: For using on TV by pairing Mpow with headset, please search Mpow transmitter or receiver/transmitter.)

User questions & answers

Question:	Could I use this device as a BT receiver with 3.5mm plugged into jack on a treadmill with built in speakers? And use a BT transmitter plugged into TV
Answer:	The USB / SD compatible video formats: AVI, 3GP, MPG, MPEG, RMVB, DAT, FLV, MOV, MP4, RM, XVID.
Question:	Is the 3.5mm male piece attached or can it be removed? I want to know if the actual receiver has a female input where I could plug in headphones
Answer:	You can pair our IR wireless headphones. DWH005: https://www.amazon.com/dp/B01M1RQBOS?ref=myi_title_dp DWH006: https://www.amazon.com/dp/B01LWXVAA7?ref=myi_title_dp
Question:	Can it charge while being used at the same time
Answer:	Yes it comes with a plate
Question:	do you have to manually turn it on, or can you use a power plug and have it automatically just work everytime
Answer:	Yes it has a pig tail for RCA plugs and to wire the speakers

• BLUETOOTH V4.1: The latest Bluetooth 4.1+EDR technology provides lower power consumption and wider compatibility. You could enjoy your smart phone music or handsfree calling through your car stereo system.
• AUTO-ON & AUTO-CONNECT: This Bluetooth car kit will power on automatically when you start the car, then auto sync with the last connected phone (please make sure the Bluetooth of your phone is turned on before starting the car)
• THE GROUND LOOP NOISE ISOLATOR INCLUDED: In most cases, the sound quality is excellent. If you are bothered by the buzzing noise, you could use this noise isolator to avoid it.
• Dual Port Car charger included: Comes with a 10 watt dual port 2.1A cigarette lighter power adapter, stand ready to charge additional devices at the same time.
• CONNECT To 2 PHONES: With the multipoint technology, the Besign BK01 Bluetooth Car Kit can connect to 2 devices at the same time.

User questions & answers

Question:	Does this receiver need to be charged
Answer:	Sorry, it doesn't have the built-in battery inside, it is powered by the included car charger directly. So you don't need to worry about the battery and charging issue. Any further assitance, please feel free to contact us via e-mail: [email protected].
Question:	Can I turn off the beeping so that it doesn’t beep between every song
Answer:	Turn the volume on your phone all the way up. That should stop the beeping.
Question:	Where is the microphone
Answer:	You could see a hole below the multifunction button in the product main body, that is the micrphone.
Question:	Does this one has noise/echo cancellation technology
Answer:	Hello, Tian,Our this bluetooth car kit is with CSR Bluetooth V4.1 chipset inside for noise and echo cancellation technology. And we also have special ground loop noise isolater included in our black color version, to avoid the noise for wireless music streaming or handsfree talking in some special car models. Thanks.

Product features

Besign BK01 Bluetooth 4.1 Car Kit with Dual Port USB Car Charger and Ground Loop Noise Isolator for Car with 3.5mm AUX input Port

Product Description

1．Instant solutions to turn car stereo system into bluetooth wireless environment for hand free calls on the road and access to the music on mobile devices.

2．With the Ground Loop Noise Isolator, which helps decrease the buzzing noise in some cars while playing music or handsfree calling, thus giving you the better music or calling experience.

3．Bluetooth 4.1 technology offers significantly lower power consumption and more stable signal transmission, thus giving you a lossless audio transmission and crystal-clear phone calls and music.

4．Works with Bluetooth devices and all cars with a 3.5mm AUX input. Stream audio through 3.5mm input in car stereo and enjoy your favorite music from your smart phones.

5．Multi-Point function, this bluetooth car kit could connect with two smart phones at the same time;



Specification

• Bluetooth specification 4.1 and supports hands-free profile
• 3 Button design: MFB (Multi-Function Button), Previous Song Button, Next Song Button
• LED Indicator Status: Blue and Red
• Built-in noise reduction microphone
• High-Performance cigarette lighter car charger with Dual USB Port
• Ground Loop Noise Isolator included for Noise Elimination

Note:

• BK01 Car Kit powers on and off along with the ignition of the car.
• Press & hold the MFB for 5 seconds to turn BK01 car kit on or off.
• BK01 Car Kit recognizes the previous paired device and will re-connect it when it's powered on.

Support two phones simultaneously:

You can connect with two smart phones with the multi-point support of this Bluetooth AUX adapter

How to connect with Two Phones?

1.Disconnect BK01 car kit from the first paired smart phone by disable the bluetooth function on the smart phone. BK01 Car kit will enter into the pairing mode again automatically.

2.Enable the bluetooth feature on the 2nd smart phone & search for BK01 car kit and pair.

3.Enable the bluetooth feature on the first paired Smart phone. BK01 Car kit will be connected with both mobile phones now.

Note: You need to connect the previous paired smart phone manually if it couldn't connect it automatically.



Siri or Voice Command

One Button to activate the Siri or Voice Command

In the standby mode, press & hold the“Next Track” button for 2 seconds to activate the voice command function on Andriod or iOS devices. Refer to the phone manual for detailed instruction if applicable.



FAQ

1. How to use this car receiver?

A. your car must have a 3.5mm Aux port.

D. Switch the car audio to AUX when you use this car receiver.

2. The calling volume is very low and music volume is very loud:

Call and music volume is different setting in your smart phone. If you change the car audio volume, the difference is still there.

Adjust the call volume when your smart phone in the call or dialing mode only.

Note: iPhone first Bluetooth connection, call volume will decreased to a very low level, you need to adjust it manually as above.

3. Auto-On: Auto-on is activated by the impulse current.

The impulse current activation will be failed if the twice power supply in short time, you need to turn on the car kit manually in this case. Example as follows:

When change the power supply from car engine to the battery.

Other conditions caused the power supply changed or transferred in short time.

4. No calling voice from this car receiver.

A. Open your bluetooth setting, and click this car receiver, then check if you have select all the related profiles for this car receiver.

B. For iPhone, please receive the phone call via this car receiver button; the calling will transfer to your phone speaker if you receive the phone call from your iPhone, this is iPhone Bluetooth setting.

If the above solution is not workable for your order problem, you could reach us via contact seller with your Amazon order number. We will solve your problem as soon as possible.Thanks.



In the Box

• Besign BK01 Bluetooth Car Kit
• USB Car Charger
• Magnetic Mounting Plate
• The Ground Loop Noise Isolator
• User guide

Product description

MPOW NEW WIRELESS MUSIC RECEIVER

NEW DESIGN! Display them all!



An OLED screen installed: Show Bluetooth connection status, battery, volume, and caller’s ID.



Bluetooth 5.0 and CSR Chip

Offer the fastest and strongest wireless connection and Hi-fi rich bass sound.



Double Noise Cancellation

Get clear hands-release calling experience for both ends of the call by DSP and noise cancellation



12 Hours of Battery Life

A single charge only takes 2.5 hours. The lithium battery supports safe using while charging.



Wide Compatibility

The 3.5mm AUX adapter and cable are wildly applicable to all wired speakers and headphones.



Compact And Polish Design

Mpow Bluetooth receive is artfully designed with round corners for smoother touch. Easy plug, pair and play. This updated unit comes with a USB power adapter. Plug into cars/wired headpones/home stereo systems or other speaker systems via the 3. 5 mm or RCA cable, then pair with the Bluetooth audio devices such as iPhone, iPad tablet and other Android Smartphones. After that, you can enjoy the music.

• NEW DESIGN: The first Bluetooth receiver with a display screen has come You can have all the information of the wireless streaming status from a simple glance at the screen It shows Bluetooth connection status battery volume and caller’s ID etc
• NOISE CANCELLATION: Mpow offers the best hands-release calling experience by using dual noise-canceling technology The receiver has DSP and noise-canceling software installed ensuring both clear listening and authentic voice transmitted
• 3D SURROUND SOUND: Mpow provides Hi-fi wireless audio experience with a built-in CSR chip that supports AVRCP A2DP HFP and HSP profile If you prefer rich bass and stereo sound just press “+” and “-“ buttons to activate surround sound effects
• BLUETOOTH 5 0 RECEIVER: Installed with Bluetooth 5 0 chip Mpow new wireless music receiver has an unrivalled performance with 2 times faster transmission speed stronger connection stability and wider signal range of 40 feet than the older version
• HANDS-RELEASE CALLS & VOCIE ASSISTANT: One-click “✆ ”to Answer/ Hang up/ Refuse or Redial a Call Long press “MBF” to active Siri or Google Assistant to make phone calls send texts or get driving directions Make your drive more safely and convenient

Product features

Car Kit with Auto Power on

Mpow new wireless receiver automatically turns on when the car is started.

This feature requires the switch is slid to ON and the charging cable is connected to power.

Stay Pairing with 2 Devices

Mpow wireless receiver can pair with 2 Bluetooth devices simultaneously.

2 Bluetooth icons on the screen show the pairing status.

Easily switch between two devices.

Activate Voice Assistant

Press the MFB for 1 second to wake Siri or any voice assistant on your phone for safe driving.

The built-in noise-canceling microphone clearly captures your voice even in a loud environment.

Connect Everything

Mpow wireless music receiver is compatible with all non-Bluetooth audio source devices.

Non- Bluetooth Car Stereo

Wired Home Stereo

Wired Headphones

Compact and Portable

2 in. x 1.3 in. mini size is convenient for carrying around.

Round corner design makes it perfect to fit your palm.

Ultra-light weight ensures easy installation anywhere.

Easy Installation

No more tools or installing software required.

Simple plug in and sing along

2 ways of connection: 3.5mm male to male connector or 20 inches 3. 5mm Audio Cable

Product description

SoundBot SB360 Bluetooth 4.0 Car Kit Hands-Free Wireless Talking & Dynamic Music Streaming Dongle w/ Triple Ultra High-Performance USB Car Charger + Magnetic Mounts + Built-in 3.5mm Aux Cable



Product Description

Instant solutions to turn car stereo system into bluetooth wireless environment for hand free calls on the road and access to the music on mobile devices.

On board 3 control button functions for answering/ending call, skip/volume up,backward/volume down.

Fashionable and stylish design design provides maximum compatibility to the vehicles.

Supports Bluetooth A2DP profiles. Backward compatible with previous wireless standards.

Pairs with all compatible Bluetooth enabled device such as Windows Phone, Smartphone, Android, Apple, iPhone 6, iPhone 6 Plus, Samsung Galaxy Note 4, Galaxy S5, Kindle, Kindle Fire, iPad, Nexus, Google, Tablets, Laptop, PC, & more.



Specification

Bluetooth specification 4.0 and supports hands-free profile

Dimension: 1.55" diameter x 0.5" thickness

Weight: 1.25 oz

3 Button design: MFB (Multi-Function Button), VOL+, VOL-, FWD, REV

LED Indicator Status: Blue and Red

Built-in noise reduction microphone

High-Performance cigarette lighter car charger output



In the Box

SoundBot SB360 Wiress Car Kit

Triple Ultra High-Performance USB Car Charger

Magnetic Mounting Plate

SoundBot Wearable Clip mount for Enhanced Call Quality & Mobilized Placement

SB360 user guide

• Universal Wireless 4.0 wireless technology with backward compatibility & A2DP profile for Smartpohne, Android, Apple iPhone 6 Plus, Google Nexus, Samsung Galaxy, Tablets, other media players
• Features echo and noise reduction technology for continuous non-stop crystal clear call conversation & dynamic music streaming wirelessly. No batteries required
• Comes with a FREE Triple Ultra High-Performance USB Charger, built-in mic and 3.5mm AUX cable. Stand ready to charge additional devices at the same time
• On board multi-function, previous, and next buttons for intuitive control command with easy access & simple operation
• SoundBot wearable clip mount for flexible mobilization and optimal call quality placement - even for the passenger

User questions & answers

Question:	can you charge it while using it? (ie never have to worry about turning it off when you turn the car off
Answer:	The SB360 has no battery so it can't be charged and consequently, it turns off immediately when electrical power is removed. However, if and when the power is removed depends on the car model. Some cars permanently provide power to the cigarette lighter (power) ports, even when the ignition/accessory switch is turned off. In that case if you leave the SB360's power supply connected, the power supply will eventually run down the battery. Some cars leave the power switched on to the power/cigarette-lighter ports for about 10 minutes. Some cars turn the power off (to those ports) as soon as the ignition switch is turned off.If the power is left on, the SB360 will shut down after 10 minutes of inactivity, but if you've got the SB360 plugged into a power supply that doesn't turn itself off when connected to an always-on cigarette lighter port, then the power supply itself will drain your battery even though the SB360 turns itself off. (That happened to me.)
Question:	Does this turn on automatically when I start my car and does it connect automatically
Answer:	Yes, it turns on automatically when USB power is turned on. If your USB port stays powered when your car is off, the SB360 will also stay powered. And yes, it re-connects automatically to your phone when the USB power comes on.
Question:	is there engine whine
Answer:	I have a 2009 Lexus IS250 that does not have a built-in USB port and yes, there is a whiny noise that fluctuates with engine speed. I tried several different charge adapters and got noise from the accessory and cigarette power sources. I also tested this out on our 2011 Jaguar XF that has a built-in USB port and there was no noise, so I think if you have to use a car charger (even the one that comes with this kit, because it too was noisy), just go ahead and get the adapter too. Soundbot makes a ground loop noise isolator adapter (SoundBot SB363) that completely eliminated the noise, so I can recommend it too. Once the noise issue was sorted this thing works really really well.
Question:	does it work if you dont have an aux plug in you car
Answer:	My car is old, and has a cassette player with no aux output. I bought this item (SoundBot SB360) along with a Phillips tape adapter (that brand works best in my car) and a 3.5mm coupler. It works perfectly. I just coil the excess cords and put them in the little shelf-cubby-thing behind my shifter...if you don't have a space like that, just add some automatic cord winders to your order to manage the excess.

Product features

Universal 4.0 Wireless Technology

Universal 4.0 wireless technology with backward compatibility & A2DP profile for Smartphone, Android, Apple iPhone 6 Plus, Google Nexus, Samsung Galaxy, Tablets, other media players.

Multi-function Controls

On board multi-function controls for previous and next buttons for intuitive control command with easy access & simple operation.

SoundBot Wearable Clip Mount

SoundBot wearable clip mount for flexible mobilization and optimal call quality placement - even for the passenger.

Echo and Noise Reduction

Features echo and noise reduction technology for continuous non-stop crystal clear call conversation & dynamic music streaming wirelessly. No batteries required.

SoundBot SB360 Bluetooth Car Kit

Universal Bluetooth Wireless 4.0 wireless technology with backward compatibility & A2DP profile for Smartphone, Android, Apple iPhone 6 Plus, Google Nexus, Samsung Galaxy, Tablets, other media players, and more!

Features echo and noise reduction technology for continuous non-stop crystal clear call conversation & dynamic music streaming wirelessly. No batteries required!

SoundBot SB360FM Bluetooth Car Kit

Receiver adapts universal FM Radio transmitter technology with no 3.5mm audio cable or jack required to reproduce non-stop continuous full spectrum HD acoustic sound to turn car vehicle stereo system into a wireless environment.

Bluetooth Wireless 4.1 standard that is backward and forward compatible to all Bluetooth enabled media player devices with remote control capability via A2DP profile up to 33 feet of remote distance.

Featuring large on-board LED display with 10 preset stations to enable operation and change of radio frequencies at ease conveniently and quickly to match with the car FM channel.

SoundBot SB361 Bluetooth Car Kit

Standard 3.5mm audio cable for Smartphone, Android, Tablet, iPhone, iPad, Kindle, and other media players without the need of Bluetooth wireless capabilities.

For supported media player model and operating system only, iOS SIRI and Android voice command can be activated.

• Dual USB car charger: 2 USB charging port to charge most USB Devices. Input 12V/24V, 1a port with USB reading and charge function; smart 3. 1 A charge port which can intelligently identify Android or iPhone devices and charging.
• More compatibility: wireless Bluetooth FM transmitter adapter for car radio,transfer calling/MP3 music/Cellphone voices to car speaker.Compatible for iPad,iPhone,Samsung,Google,LG,HTC and Bluetooth Device.
• Hands free function: built-in microphone, switch to hands-free mode automatically from music playing status when receiving calls. Answer/reject/hand up/recall all in One key.
• Car battery voltage function: Show 3 seconds voltage when plug into the cigarette port. Always keep battery state of health. Then it turn to automatic play mode.
• Music playing:support Bluetooth /USB disk/TF card/ MP3/wma player. With anti-interference performance and CVC technology.Listening to music while charging. Automatically connect memorized paired when power on. 12-Month worry-free.

User questions & answers

Question:	does this support ford mustang 2014 v6 model
Answer:	Hi,Amazon Customer, Thank you for your question. Yes, the fm transmitter support ford mustang 2014 v6. The bluetooth fm transmitter connect the cellphone via bluetooth, connect car radio via fm channel.Thank you. Please don't hesitate to contact us at [email protected] if any confuse, We will reply to you and resolve your problem within 1 business days. Thank you. Sincerely, LIHAN TECH Support Team
Question:	Can you listen to music from apple music app through bluetooth via usb attached to phone
Answer:	Dear Heddy Ona ,The car charger can listen music through bluetooth connection: 1.Plug the FM Transmitter into the car cigarette hole to power on, there is a prompt voice : Bluetooth is ready to pair.2.Turn on your smart phone Bluetooth, search the FM Transmitter with the name of HY82.3.After connected, there is a prompt voice Bluetooth connected successfully.4.Turn on the car FM radio , choose a clean channel, make sure the car radio channel is clean to avoid interference by local radio signal.5.Adjust the FM transmitting frequency to match the car radio FM channel.6.Then you can use Bluetooth function to play music from your smart phone APP or answer a call with hands free.Please kindly noted that for this device , priority play sequence is Bluetooth > TF card > USB card.If any confuse,please don't hesitate to contact us at [email protected]. We will reply to you and resolve your problem within 1 business days.Thank you.Merry Christmas.Sincerely,LIHAN TECH Support Team
Question:	Will this work for an Iphone
Answer:	Yes. I have an iPhone 6 and it works great. It isncompatible with any device that has Bluetooth music streaming capability.
Question:	How do you change the station on the fm transmitter
Answer:	Dear Laura,Thanks for your question:1.Long press the multifunction key until the LED display flashing.2.Choose channel in the car audio.3.Adjust the FM transmitter frequency to match the car radio FM channel.4.Connect phone bluetooth or insert the USB/TF card, FM Transmitter will start to play automatically.If any confuse,please don't hesitate to contact us at [email protected]. We will reply to you and resolve your problem within 1 business days.Thank you.Happy new year!Sincerely,LIHAN TECH Support Team

Product features

Bluetooth Handsfree Car Charger,FM Transmitter&Music adapter,3.1A Dual USB Port

You need an In-car FM transmitter to stream music from your phone, tablet, MP3, MP4, TF card,even USB flash disk to the car stereo system.

Enjoy music and handsfree call on the road.

Play Music in Multi Way

Good Quality and More Compatibility

Product description

Safe Phone Calls while Driving

Drive completely safe - with both hands on the steering wheel - while still being able to answer phone calls thanks to the TaoTronics receiver. Benefit from the cVc 6.0 noise cancellation that will make your calls clearer and eliminate static noise when listening to music with the increased noise isolation circuit design. Compatible with HFP, HSP, AVRCP, A2DP, and Bluetooth 4.2.



Universal Car Compatibility

Find the ideal spot for the receiver in every car thanks to its two installation modes: via the magnetic base that is mountable with 3M adhesive tape or the integrated air vent clip. Thanks to these options the receiver fits in every car model and can be fixated exactly where you need it.



Double Connectivity for Twice the Freedom

Connect up to two Bluetooth compatible devices with the receiver and enjoy multitasking freedom at its best. If you are in the middle of your favorite playlist and someone calls you, don’t worry: easily take the call and as soon as it is finished, your music will automatically resume where it stopped.



Straightforward Controls

We doubled up your safety while driving with the extremely user-friendly controls. Don’t tediously look for the right button to push, but find it on your first try with the backlit design and the clearly separated controls. Manage your music with the Multifunctional Button to Pause / Play your tunes (also used to Answer/ Reject your calls), the Previous Track / Volume –, and Next Track / Volume + buttons.



Complete Car Kit

TaoTronics gives you a completely free of charge USB car charger (5V 2.1A) so your car is perfectly equipped for every road trip, adventure, or work commute. The dual output provides valuable power to two devices simultaneously and your phone or tablet will be charged by the end of your drive.

• Safe phone calls while driving make hands-free phone calls that are clearer and better with cvo 6 0 noise cancellation and enjoy music with less static thanks to advanced technology This car kit is only used in cars with an aux input )
• Universal car with aux port compatibility with the dual mounting option you can fixate the receiver via the magnetic base that is mountable with 3M adhesive tape or the integrated air vent clip
• Double connectivity for twice the freedom connect up to two Bluetooth compatible devices with the receiver and enjoy music or answer phone calls from either devices
• Straightforward controls we doubled up your safety while driving with the extremely user-friendly controls that are backlit and clearly separated from each other
• Complete car Kit The free dual USB car charger (5V 2 1a) can take care of up to two power hungry devices and charge them simultaneously while you are driving

User questions & answers

Question:	Does anyone have a recommendation for a aux Bluetooth car kit with an extra long microphone wire/cable? 95cm was not long enough for install
Answer:	Buy a 3.5mm m/f audio extender cable, they’re only a few dollars.
Question:	How long is the cord
Answer:	Approximately 5Feet
Question:	Does this require an AUX spot in the vehicle
Answer:	If your car has a cassette tape drive, you can get a cassette adapter that has a cable with a male 3.5mm on it. You would then likely need a 3.5mm female to female adapter to plug in the TaoTronics 3.5mm male. The cassette audio adapters provide much superior sound to the FM transmitters. This is what I would try if I had a cassette tape unit and no aux port. My daughter uses one of these cassette adapters for the audio in her 2008 Hyundai Tucson that has no aux port. The only issue with this might be that the cassette adapters likely have less gain vs an aux port and therefore the volume might need to be cranked up a bit more?
Question:	Does it automatically turn on with the car? Or do you have to push a button
Answer:	It is powered by USB, so if your cigarette lighter adapter-to-USB powers on when the car turns on, it will turn on the Bluetooth adapter at the same time.

Product description

Q1: Will this charge while having an otter box cover or pop holder on the phone？



A1: No. The induction distance between the wireless car charger and the smartphone cannot exceed 4mm. Thick phone cases and pop holder will interfere with the wireless charging.



Q2: Will this provide 10W fast charging for the Pixel 3?



A2：Yes. It’s also working for these phones:



iPhone 8/8 Plus/X/XS/XS Max/XR/11/11 Pro/11 Pro Max



Xperia Z3v(D6708)/XZ2/XZ2 Premium/X23



G2/G3/G6/G6+/G7/G7 ThinQ/G7+ ThinQ/G8/G8 ThinQ/V30/V30+/V35/V40 ThinQ/V50/V50 ThinQ/LG Lucid2(VS780)/LG Optimus FS(AS780)/Optimus Vu 3/Optimus G Pro/Optimus VC11/Optimus LTF/Stectrum 2



Nole 5/7/PE/8/9/10; S7 Edget/S8/S8+/S8 Active/S9/S9+/S10/S10e/S10 SG/S10+/S20 Series



Pixel 3/3XL/4/4XL



Q3: When I turn off the vehicle(car power), can the holder's arm be released automatically or manually, so I can take my phone out?



A3: Yes, you can remove your phone by pressing the side buttons after the vehicle is off. (It is recommended to remove the phone immediately, or the arm will not work due to the delay).



Q4：Does this charger turns off when the car engine is turned off? Will it drain my car battery if left plugged in?



A4：No. When the car engine is turned off, the charger will also be turned off and the power supply will be disconnected.



Q5：Is there a USB-C connector at one end of the cable and a USB-A connector at the other end? Is the USB-A end plugged into the power adapter?



A5: Yes. Plug the USB-A end of the cable into the power supply, and the USB-C end of the cable into the car mount.



Q6：What is the point of wireless charging? You still need to plug in the mount. What am I missing?



A6: The phone is wirelessly charged through the mount, but you still need to draw external power via cable. You don't have to finagle to hook up your phone to a cord every time or worry about the port being damaged.

• FAST WIRELESS CHARGING UP TO 10W-10W fast charging for Galaxy Note10+/Note 10/S10+/S10/Note 9/S9+/S9/S8+/S8/Note 8/S7 edge+/S7/S6 edge+/S6 edge/S6+/S6/Note 5; 7. 5W fast charging for iPhone 11 Pro Max/11 Pro/11/XS Max/XS/x/XR/8/8 Plus (10W/7. 5W fast charging requires a QC2. 0/3. 0 adapter); 5W standard wireless charging for other Qi-enabled Phones (5V/2A adapter is required) The adjustable support Foot helps align different sizes of phones for efficient wireless charging.
• AUTO-CLAMPING ARMS-The automatic-clamping feature enables you to mount or retrieve your phone with one hand motion. Just tap one of the two release buttons on the side to open the arms automatically（NOTE: when the power is connected） once the phone is in the arms will automatically close to secure your phone. The built-in energy storage setting allows you to open the arms to take your phone out within 10s-20s even after the power supply is disconnected or your car is stalled.
• TWO INSTALLATION METHODS-The car mount can be installed on the vehicle’s dashboard And air vent with the included suction cup base and air vent clip. The strong suction cup base with sticky gel and anti-shake stabilizer keeps the mount securely on the dashboard without wobbling.
• FLEXIBLE AND LONG GOOSENECK-Unlike the conventional stand-up dashboard car mount This innovative mount lies on the dashboard without blocking your line of sight. The 15cm/5 9in aluminum gooseneck brings your phone closer to you for better and easier access to your phone’s functions. What makes us unique is that the sturdy yet flexible gooseneck can be bent to avoid obstructing the display and irregular vents.
• QI STANDARD AND FOD FUNCTION-The Qi wireless charging technology and large coil maximize the charging output and efficiency making charging faster than standard wireless chargers. The built-in intelligent chip provides over-charge/temperature/voltage/current protection to safeguard devices and users With FOD (foreign object detection) and smart LED indicator. The red light indicates that it is charging normally while a flashing red means it is not working properly.

Product features

Automatic Clamping Feature

Press the button on either side and the “robotic” arms will automatically open, just slide your phone into the phone holder, the arms will automatically close to secure the device and charge instantly.

Wide Compatibility

The arms extend from 5.7cm/2.2in to 8.9cm/3.5in, meaning that it works with any wireless-charging-enabled phone. As long as the thickness of the phone case is less than 4mm, you can charge with it on.

Safe Qi Wireless Charging

The wireless car phone mount holder is equipped with the built-in large coil to maximize the charging speed, and it has safety protection against overcharge, overcurrent, short circuit, and temperature control.

Product description

The Freedom of Wireless Music

Make the most of your car radio. Just connect this Bluetooth receiver and enjoy customized playlists from your mobile devices. Convenient connection with Bluetooth-enabled devices, including iPhone, iPad, Android & Windows phones, tablets, and more.



Easy to Use

Simply plug the car charger into your car’s 12V socket; then connect the receiver to your car stereo system 3.5mm audio input jack and to one of the car charger USB ports. The receiver powers on automatically when your car is started and it will automatically connect with the last-paired device. The magnetic base on the back of the receiver allows you to take the dongle from car-to-car or listen to music at home.



Hands-Free Phone Calls

Convenient and safe hands-free calls with the built-in microphone. You won’t miss important calls while rocking to music on the road.



Supreme Audio Connectivity and Quality

Experience Bluetooth 4.1 audio with improved connection stability, faster pairing, and reduced power consumption for connected devices (like your phone) when wirelessly streaming audio.



45-Day Money Back & 24-Month Warranty

All AUKEY products are backed by our 45-Day Money Back Guarantee and 24-Month Product Replacement Warranty.

• Wireless Upgrade: Instantly add wireless audio to your existing car stereo system, and listen to your favorite songs and podcasts from your smartphone, tablet, and other devices
• Handy USB Charging: Includes a 3-port USB car charger to power this receiver and charge your smartphone and other USB-powered devices with a total output up to 3.1A
• Easy Use: Convenient music control with the multi-function button and track-skipping buttons. Built-in microphone for hands-free phone calls over your car stereo system speakers
• Bluetooth 4.1: Fast, easy, energy-efficient connection for all compatible devices, with a wireless range up to 33 feet (Note：If the product occasionally has hiss/ background noise while using it, it is caused by ground loop noise,with the recommended ground noise isolator from AUKEY could solve this problem)
• Package Contents: AUKEY BR-C8 Wireless Audio Receiver, 3-Port USB Car Charger, Magnetic Base, Spare 3M Adhesive Pad, User Manual and 24-Month Product Replacement Warranty Card

User questions & answers

Question:	How is the microphone's audio quality during phone calls while driving? Does it have noise-cancelling to reduce background/road noise during calls
Answer:	Yes it is compatible with MP3, MP4, MP5, JPG, MPEG4, WMA, AVI file formats.
Question:	What's the amperage of the usb output? Ampere for android can help get some baseline numbers
Answer:	Hi, yes it is compatible with all devices since there are a video output and input port. Thank you.
Question:	My only available port in my car is always-on. Will this kill my car battery by basically being on
Answer:	Yes you can directly wire them.
Question:	Does it work with Google Now
Answer:	Hola, este producto no tiene Unidad de DVD

Product features

Easy Setup

Upgrading your car with Bluetooth connection is a snap. Just plug in the standard USB-A power connector and 3.5mm audio jack.

Ready to Rock

A perfect companion for on-the-go music and hands-free calls.

Handy Power Source

Included 3-port car charger powers this Bluetooth receiver, your streaming mobile device, and another USB device simultaneously.