12 best garmin fish finder with gp

Product description

Following in the success of the Striker fish finder series, Garmin is proud to announce the new Striker fish finders with ClearVu technology. These devices are designed to allow you to mark your favorite fishing spot and easily navigate back to it tomorrow, saving you time and money. Striker series fish finders are available in 3.5-, 5- and 7-inch display sizes. Display resolution: 480 x 320 pixels.

• Clear Vu scanning Sonar shows you more of what is in the water around your boat; This high frequency sonar gives near photographic images with detailed representations of objects, structure and fish
• The power of simple offers a keyed interface with dedicated buttons; The device is easy to use and easy to install; Available in 3.5, 5 and 7 inch display sizes; Water rating IPX7
• Waypoint map: Use the way point map to easily view, mark and navigate to locations such as brush piles, stumps and docks; Maximum depth 1,600 feet freshwater, 750 feet saltwater; Current draw at 12 volt: 0.23 Ampere
• Chirp Sonar sends a continuous sweep of frequencies which provides a wider range of information; Chirp Sonar is able to create crisper fish arches with better target separation
• Built in flasher: View your sonar data in the classic flasher format; Ideal for ice fishing or vertical jigging. Display size: 1.9 x 2.9 inches (4.9 x 7.3 centimeter); 3.5 inches diagonal (8.7 centimeter)

User questions & answers

Question:	Does this come with a transducer
Answer:	Yes mine came with a transducer. It came with everything needed to set up and be ready to go as if you never had a fish finder before. Although the two wire clamps to hold your cable for the transducer are fragile, I recommend getting new ones
Question:	Does this unit also give depth readings of the water
Answer:	Yes! Depth, temperature, speed you're moving, time of day etc. this is an awesome unit for the price
Question:	does the power source (12 volt i've read) come with the package, or do i need to purchase that
Answer:	Yes you can and I have done just that. You can get it all here on Amazon. There are plenty info doing just this on the internet. Just assemble these parts. Here is what I have. When done I have it mounted via Scotty #141 Kayak/SUP Transducer Mounting Arm with Gear-Head https://www.amazon.com/gp/product/B0174X6T5A/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Battery is https://www.amazon.com/gp/product/B006LO9XHA/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 The box it fits in is https://www.amazon.com/gp/product/B011ZB4NLO/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Switch is https://www.amazon.com/gp/product/B011ZB4NLO/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Uxcell a12110200ux0689 Waterproof Connector Cable Gland is https://www.amazon.com/gp/product/B00AOBGQ26/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Question:	Does it has map of Middle East Kuwait
Answer:	yes but its top secret

Product features

STRIKER 4

3.5-inch CHIRP Fishfinder with GPS.

Navigate Easily with Waypoint Map

Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It’s also a great tool for finding your way back to the boat ramp.

Check Your Speed on Screen

You can quickly and easily see your boat’s speed on the screen of your STRIKER fishfinder. It’s a great tool to make sure you are trolling at the right speed for the lure you’re using and for a particular fish species. It’s also a good way to tell if you are going the right speed in wake-controlled areas.

Take Your Fishfinder Anywhere

A portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it’s perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.

Experience the Clarity of CHIRP

STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.

Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.

You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what’s below.

Product description

The striker Plus 5cv Fishfinder with a bright 5” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP Clearly scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat's speed.

• Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
• Built-in Garmin Quickdraw Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed. Frequencies supported : Traditional: 50/77/200 kHz
• Bright, sunlight-readable 5” display and intuitive user interface
• Rugged design for every fishing environment. Display resolution: 800 x 480 pixels

User questions & answers

Question:	How long is the cord from the transducer to the unit itself
Answer:	On my Sun TRACKER 16 foot easily reaches from the battery to the display. Transponder on the front reaches to the counsel.
Question:	Does this gps have a chip slot
Answer:	No again you need too buy a different model....
Question:	Will this work on a Kayak, will the transducer fit through the scupper holds
Answer:	You only need to run the transducer wire and plug up through your scupper hole to and plug it into the back of the unit. No need to fit transducer through scupper.
Question:	Con que accesorios viene este gps
Answer:	transductor y kit de instalacion

Product features

Garmin Striker Plus 5cv with Transducer, 5" GPS Fishfinder

The STRIKER Plus 5cv fishfinder with a bright 5” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP ClearVü scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.

Garmin Quickdraw Contours

Nobody knows the waters you fish better than you and your fellow fishermen. While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been. No special knowledge is required.

Product description

The striker Plus 7sv Fishfinder with a bright 7” display and built-in GPS features Garmin Quickdraw contours map drawing software, which stores up to 2 million acres of content with 1’ contours. Garmin CHIRP traditional sonar provides crystal-clear images with remarkable target separation. Get nearly photographic images of what passes below and beside your boat with CHIRP Clearly and CHIRP SideVü scanning sonars. Use Built-in Wi-Fi to pair with the ActiveCaptain app for smart notifications, access to Quickdraw Contours community data and more.

• Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü and CHIRP SideVü scanning sonars
• Built-in Quickdraw Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres. Resolution : 800 x 480
• Built-in Wi-Fi for access to ActiveCaptain app so you can receive smart notifications, access Quickdraw Contours Community and transfer waypoints and software update notifications
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed. Transmit power - 500 W (RMS)
• Bright, sunlight-readable 7” display and intuitive user interface

User questions & answers

Question:	Is it sensitive enought to see your line / jig/ lure
Answer:	Most of the time yes depending on if directly below and high sensitivity
Question:	Is this unit networkable
Answer:	It will network with your smart device via wifi.
Question:	The photos show both a blue and yellowish backlights on the down and sidescan. Is that configurable
Answer:	Yes you can change it
Question:	does it come with gps maps
Answer:	It does not come with GPS maps, or have the ability to add GPS maps via a SDcard. You can mark waypoints and tracks, but no traditional GPS mapping like with lake cards. It does however, have Quickdraw Contours with the Striker Plus version. What this does is create its own map showing contour lines like a topo map.

Product features

Clear Scanning Sonar Images

Garmin ClearVü scanning sonar gives you a nearly photographic, wide image of what passes below your boat. Garmin SideVü scanning sonar gives you a crisp, clear view of what lies off to each side of your boat. You clearly see structure, submerged objects and fish. Garmin CHIRP traditional sonar provides remarkable target separation. All this sonar technology is combined into 1 transducer to help you catch more fish.

GPS Fishfinder

The built-in, high-sensitivity GPS finds and maintains your position anywhere you go on the water. The GPS allows you to mark waypoints for different locations. So, if the fish are biting in 1 spot, you can mark it, and return to it on your next trip. Mark docks, boat ramps and other locations on the lake, and create routes back to them for your next trip. GPS also allows STRIKER Plus 7sv to show your speed on screen, so you can be sure you’re trolling at the right speed for the lure you’re using or in wake-controlled areas.

Built for You

The STRIKER Plus 7sv fishfinder makes fishing a breeze, and it’s built to work in any environment. The bright, sunlight-readable display gives you a clear view of what is below your boat, even on the brightest days. And the larger screen gives you a better view of what is happening below the boat. The intuitive user interface makes it simple to navigate to whatever feature you need, so you are ready for anything on the water.

Product description

The STRIKER Plus 4cv fishfinder with a bright 4.3” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP ClearVü scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.

• Includes transducer for built in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
• Built in Garmin Quickdraw Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built in GPS lets you mark waypoints, create routes and view boat’s speed
• Bright, sunlight readable 4.3” display and intuitive user interface
• Rugged design for every fishing environment.Transmit power:300 W (RMS)

User questions & answers

Question:	Does the 4cv have a memory card slot for storing data? The specifications on Garmin state it can map up to 2 million acres with 1' contours
Answer:	No, not that I know of anyway.
Question:	do they offer and transducer extender cable
Answer:	https://buy.garmin.com/en-US/US/p/pn/010-11617-10
Question:	Does it have gps to find way back to dock
Answer:	The unit employs tracks. Meaning if you selected in the menu option it will track your progress throughout the day.so if you merely follow your track back to your origin it will take you back to the dock. You can also create waypoints that you can navigate to. So if you created a waypoint and named it dock you could simply use the unit to make your way back to the dock .
Question:	Why do people complain about the lack of instructions when there is a user manual on this page labeled "user manual" under product description
Answer:	User manual is online and easy to print. Also its pretty easy to figure out how to use it. If I can figure it out , anyone can. Today's smartphones are harder to figure out. Also, YouTube is very helpful.

Product features

Garmin Striker Plus 4Cv

The Striker Plus 4cv fish finder includes Garmin CHIRP technology combined with Garmin ClearVü scanning sonar for a nearly photographic, wide image of what passes below your boat. You clearly see structure, submerged objects and fish. Paired with Garmin CHIRP traditional sonar for remarkable target separation, this transducer will help you catch more fish.

The Striker Plus 4cv fishfinder makes fishing a breeze, and it’s built to work in any environment. The bright, sunlight-readable display gives you a clear view of what is below your boat, even on the brightest days. And the larger screen gives you a better view of what is happening below the boat. The intuitive user interface makes it simple to navigate to whatever feature you need, so you are ready for anything on the water.

Product description

The STRIKER Plus 7cv fishfinder with a bright 7” display and built-in GPS features Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. Garmin CHIRP traditional sonar provides remarkable target separation, and Garmin CHIRP ClearVü scanning sonar shows nearly photographic images of what passes below your boat. Use built-in Wi-Fi to pair with the ActiveCaptain app for smart notifications, access to Quickdraw Contours Community data and more. Transmit power 500 W (RMS)

• Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
• Built-in Garmin Quickdraw Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built-in Wi-Fi for access to ActiveCaptain app so you can receive smart notifications, access Quickdraw Contours Community and transfer waypoints and software update notifications
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed
• Bright, sunlight-readable 7” display and intuitive user interface

User questions & answers

Question:	Will this work with a ray marine ev-100 auto helm? is it compatible with sea talk
Answer:	No. Mike, Garmin
Question:	Can I use this fishfinder gps in Europe
Answer:	Worldwide
Question:	How long is transducer cable
Answer:	I would say between 12 and 15 feet...possibly longer.
Question:	Is the cv20 transducer waterproof
Answer:	The transducer is the part that is always in the water. I sure hope its waterproof

Product features

About Us

We make products that are engineered on the inside for life on the outside. We do this so our customers can make the most of the time they spend pursuing their passions.

Our Mission

To be an enduring company by creating superior products for automotive, aviation, marine, outdoor, and sports that are an essential part of our customers’ lives.

Product description

Find more fish using the ECHOMAP™ UHD 74cv combo with a bright, sunlight-readable 7” touchscreen with keyed assist. The included GT24 transducer provides Ultra High-Definition Clearly scanning sonar, so you get a crystal-clear image of what is below your boat, and Garmin high wide CHIRP traditional sonar delivers remarkable target separation. This combo comes preloaded with BlueChart® G3 coastal charts with the best of Garmin and Navionics® data. It features a quick-release bail mount, making it easy to remove and take with you. Nmea 2000® and NMEA 0183 network support provides you with engine data, sensor Connection, autopilot integration and more. Echomap™ UHD 74cv is even compatible with the force™ trolling motor for full control of the motor from the screen plus the ability to route to waypoints, follow tracks and more.

• Bright, Sunlight-readable 7” touchscreen with keyed assist
• Includes GT24 transducer for ultra High-Definition clearer scanning sonar and Garmin high wide CHIRP traditional sonar
• Preloaded bluechart G3 coastal charts with integrated Navionics data
• Supports Panoptix all-seeing sonar, including Panoptix live Scope sonar
• Sonar sharing capabilities with other ECHOMAP Plus, ECHOMAP UHD and ECHOMAP Ultra units
• Included Components: ECHOMAP UHD 74cv with BlueChart g3 for U.S.; GT24UHD-TM transducer; Power/data cable; Tilt/swivel mount with quick release cradle; Flush mount; Protective cover; Hardware; Documentation

User questions & answers

Question:	Does this come with all cables and mounting bracket
Answer:	Yes, comes with everything needed to install and use.
Question:	can i use the gps without mounting the transducer ? I'm taking a trip and don't have time to install it
Answer:	Yes, it will work fine as a gps without the transducer mounted or connected
Question:	Will this work in international water or the U.S only
Answer:	It will work anywhere on earth.
Question:	Can i mount the transducer to shoot through the hull? my garmin echo 500c is set up that way now
Answer:	No, these transducers include sidevu which will not work shooting through a hull.

Product features

Garmin ECHOMAP UHD 74Cv With GT24UHD-TM Transducer

SONAR SUPPORT

This chartplotter supports a variety of Garmin transducers (sold separately), including the Panoptix LiveScope scanning sonar system, which lets you see all around your boat in real time.

INCLUDED TRANSDUCER

This chartplotter comes with a GT24 transducer for Ultra High-Definition ClearVü scanning sonar, which shows you a crystal-clear image below your boat. Plus, you get Garmin high wide CHIRP traditional sonar for remarkable target separation.

PRELOADED CHARTS

Experience unparalleled coverage and detail with preloaded BlueChart g3 coastal charts featuring integrated Navionics data. Charts cover the coastal U.S., including the East and West coasts, Gulf of Mexico and the U.S. and Canadian sides of the Great Lakes.

Product description

The STRIKER Plus 4 fishfinder with a bright 4.3” display and built-in GPS features CHIRP sonar for crystal-clear images and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.Display resolution: 272 X 480 pixels

• Includes dual-beam transducer with Garmin Chirp traditional sonar for crystal-clear images and remarkable target separation
• Built-in Garmin quickdraw contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed
• Bright, Sunlight-readable 4.3” display and intuitive user interface
• Rugged design for every fishing environment. Frequencies supported: Traditional: 50/77/83/200 kHz, Transmit power: 200 W (RMS)

User questions & answers

Question:	Does this Garmin fish finder comes installed with maps (Marine maps
Answer:	There is no way to put any maps on this unit but it does have storage to make your own maps. It has a mapping feature so you can map the depths of your favorite lake. The specs says it will hold 1 million acres of lake maps. Granted, you have to be on a boat and troll to do the mapping but it does work and it works rather well.
Question:	For in hull transducer mounts for a fiberglass boat, Garmin suggested putting the transducer in a container full of antifreeze. Any other methods
Answer:	I can’t speak to fiberglass as I use mine on kayak. However I do use my transducer shooting thru hull attached with duct seal that forms a reservoir around transducer and then I add water. That works perfectly! Duct seal is $3 at Lowe’s or Home Depot.
Question:	What's the difference between this and the "garmin striker 4 with transducer, 3.5" gps fishfinder with chirp traditional transducer
Answer:	This one has a feature where you can contour maps the bottom of any lake or river you're in.
Question:	how many holes do i need to drill to install the transducer
Answer:	Don't drill holes in your boat. Find an old 3/8-1/2" plastic cutting board and cut a 4x4 piece out of it and using 3m sticky tape mount it to the transom and use short screws to mount the transducer to the piece of cutting board. Did that back in 1979 and has never come loose.
Question:	Whats the maximun depth that it can read
Answer:	It’s in the description I believe. Otherwise YouTube has this information
Question:	Will this work in shallow waters? What is the minimum depth it will read accurately? Read a review where it was said to lose use under 10 feet
Answer:	I know from experience it can read depths as shallow as 1 foot but I don’t know the exact limitations or specs. The problem that renders this and any fish finder useless in shallow water is the amount of vegetation and its direct proximity. In shallow water with dense vegetation reaching the surface you’re most likely only going to see screen noise displayed which may effect the abilities to properly gauge water depths. If there is no vegetation and the ground is of solid structure then this will work fine in water 10’ or less.
Question:	Can the transducer be mounted on the trolling motor
Answer:	Yes it’s come with all the hardware needed to install you might have to change some things depending on your trolling motor
Question:	Will I be able to see the screen with polarized sunglasses
Answer:	Yes you can because I am using as well the polarized glasses with a light yellow tint

Product features

Garmin STRIKER Plus 4 With Dual-Beam Transducer

The STRIKER Plus 4 fishfinder with a bright 4.3” display and built-in GPS features CHIRP sonar for crystal-clear images and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.

Garmin Quickdraw Contours: While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been.

CHIRP Sonar Clarity: The STRIKER Plus 4 fishfinder includes Garmin CHIRP technology for a higher level of clarity and detail that you have come to expect from Garmin. Crystal-clear sonar images provide remarkable target separation and resolution in shallow and deeper water. Bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths for a timely interpretation of what’s below.

Product description

Find more fish using the ECHOMAP™ UHD 63cv combo with a bright, sunlight-readable 6” screen. The included GT24 transducer provides Ultra High-Definition Clearly scanning sonar, so you get a crystal-clear image of what is below your boat, and Garmin high wide CHIRP traditional sonar delivers remarkable target separation. Preloaded LakeVü G3 inland maps with integrated Navionics® data Cover more than 17, 000 lakes with up to 1’ contours. It features a quick-release bail mount, making it easy to remove and take with you. Nmea 2000® and NMEA 0183 network support provides you with engine data, sensor Connection, autopilot integration, FUSION-Link™ audio system and more.

• Bright, Sunlight-readable 6” combo
• Includes GT24 transducer for ultra High-Definition clearer scanning sonar and Garmin high wide CHIRP traditional sonar
• Preloaded LakeVü G3 inland maps with integrated Navionics data cover more than 17, 000 lakes with up to 1’ contours
• Nmea 2000 and NMEA 0183 network support for autopilot, fusion-link audio system and engine data
• Quick-release bail mount for fast and easy mobility

User questions & answers

Question:	can i insert a map of south pacific? thank you
Answer:	Sorry, I do not know. Lake view came installed and it was North America
Question:	does this come with a trolling motor bracket
Answer:	It does in fact come with both a transom and trolling motor bracket. I just installed mine yesterday.
Question:	Will this unit show a true reading at 55 mph
Answer:	Yes, it does.
Question:	When creating a quick draw contour map, does it save to internal or microchip storage
Answer:	It must have an SD card in it and it save to that. Mike, Garmin

Product description

The STRIKER Plus 4cv fishfinder with a bright 4.3” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP ClearVü scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.

• Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
• Built-in Garmin quickdraw contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed
• Bright, Sunlight-readable 4.3” display and intuitive user interface
• Rugged design for every fishing environment

User questions & answers

Question:	Whats the maximun depth that it can read
Answer:	Hi Steve, Because of the number of variables encountered with different makes and models of automobiles, Sony is unable to assist with the installation of car stereo and mobile audio systems. However, if you are using a wiring harness, further information about the wire color and function of each pin on the wiring harness is available. -Sam
Question:	Will this work in shallow waters? What is the minimum depth it will read accurately? Read a review where it was said to lose use under 10 feet
Answer:	Hi MarcL, we do not show them as a fit. Sorry. I recommend you use the online fit guide on our site to find more helpful information. Hope that's helpful, Don
Question:	Can the transducer be mounted on the trolling motor
Answer:	Hola Renee, Debido a la cantidad de variables que se encuentran con diferentes marcas y modelos de automóviles, Sony no puede asistir con la instalación de sistemas de audio para automóviles. Sin embargo, si está utilizando un mazo de cables, puede encontrar más información sobre el color del cable y la función de cada pin en este enlace: https://www.sony.com/electronics/support/mobile-cd-players- digital-media-players-dsx-series / dsx-a415bt / articles / 00028631. Recomendamos contactar a un instalador profesional para determinar su compatibilidad y operación. ¡Gracias! – Romeo
Question:	Will I be able to see the screen with polarized sunglasses
Answer:	Thank you for your question. The sensitivity is 87dB at 12V. Happy to help! - Creative Audio

Product description

See fish and structure in colorful detail with the STRIKER Vivid 7cv fishfinder. This easy-to-use 7” device now features high-contrast color palettes to make it easier to see what’s beneath the surface. It includes a GT20 transducer for best-in-class Garmin CHIRP traditional sonar and CHIRP ClearVü scanning sonar. High-sensitivity GPS lets you mark hot spots, plan routes and view your boat’s speed. Create and save maps with 1’ contours with built-in Quickdraw Contours software. Built-in Wi-Fi connectivity allows you to connect to the ActiveCaptain app with compatible smartphone to transfer waypoints, receive smart notifications and access the Garmin Quickdraw Community. STRIKER Vivid 7cv includes tilt/swivel mount plus transom and trolling motor mounting hardware and cable.

• Easy-to-use 7” color fishfinder with new vivid scanning sonar color palettes to easily distinguish fish and structure; tilt/swivel bailmount bracket included
• Includes a GT20 transducer for built-in Garmin CHIRP traditional sonar and CHIRP ClearVü scanning sonar
• High-sensitivity GPS to mark waypoints, create routes and view your boat’s speed
• Includes built-in Quickdraw Contours mapping
• Wi-Fi connectivity allows you to connect to the ActiveCaptain app with compatible smartphone to transfer waypoints, receive smart notifications (including software update notifications) and access the Garmin Quickdraw Community

User questions & answers

Question:	Does unit do side and down image with transducer that comes with it
Answer:	Yes, it supports the wirelss Carplay by Bluetooth connection.
Question:	What transducer comes with vivid 5cv
Answer:	This one can support HK system. The harness doesn't display on the listing, the diagram picture you saw on the listing is a universal adapters for each head unit on our shop.
Question:	Does it have a transducer for a trolling motor
Answer:	No I don’t need anything this device works great!
Question:	Can it be set to alarm at a set depth (i.e. shallow water
Answer:	Yes. It has a 3.5mm jack by the micro USB port

Product features

CLEAR, COLORFUL SONAR

Choose from 7 new vivid color options to see fish and structure in maximum contrast and clarity on your 7” fishfinder.

BUILT-IN SONAR

Use the included GT20 transducer to get Garmin CHIRP traditional sonar and CHIRP ClearVü scanning sonar.

WAYPOINT MARKING

To catch more fish, you need to know where the fish are biting. Use waypoint marking for hot spots so you can easily find your way back.

HIGH-SENSITIVITY GPS

Plan and create routes and view your boat’s speed on your fishfinder using high-sensitivity GPS.

QUICKDRAW CONTOURS

Nobody knows the waters you fish better than you. With the STRIKER Vivid 7cv fishfinder, you can store up to 2 million acres of maps with 1’ contours.

INCLUDED HARDWARE

The STRIKER Vivid 7cv fishfinder includes a tilt/swivel mount plus transom and trolling motor mounting hardware and cable.

Product description

Your new secret weapon for catching more fish? It’s the GPS-enabled STRIKER Cast castable sonar. Just download the STRIKER Cast app, pair your mobile device with the sonar, and go fishing in minutes. Cast from shore, dock or watercraft, and reel back in to locate fish and display them on your smartphone or tablet. The sonar streams wirelessly from up to 200’ away, working in freshwater or saltwater (and even below ice) to show you fish and structure in crisp detail. Select from easy-to-understand traditional 2-D sonar and ice fishing flasher modes, with setting adjustments for gain, range and more. Built-in GPS provides the ability to create your own maps with 1’ contours by using Quickdraw Contours software. Easily download new maps, or share yours with the Garmin Quickdraw Community.

• rugged, castable sonar device works with free striker cast app (compatible with apple or android devices) to wirelessly stream sonar, locate fish and display them on your smartphone or tablet
• quick, easy out-of-the-box setup: download the app, pair your mobile device with the striker cast sonar, and start fishing in minutes
• built-in gps lets you create your own custom fishing maps with 1’ contours by using quickdraw contours software
• traditional 2-d and ice fishing flasher sonar modes stream wirelessly from up to 200’ away with the striker cast app on your mobile device
• performs well in both shallow and deep water
• access to the garmin quickdraw community makes it easy to download maps to your device
• battery life: 10+ hours (battery life may vary depending on usage) on internal usb-rechargeable battery

User questions & answers

Question:	Does this also tell you the water depth
Answer:	Yes, it shown water depth and fish depths, fish size..but still not sure about the accuracy of this device..
Question:	How does this connect to phone/tablet: bluetooth or wifi
Answer:	Bluetooth
Question:	There aren't any reviews or questions. Anyone have any pros/cons to offer
Answer:	When fishing through 14 inches of ice this weekend in a narrow 6 inch hole it had some trouble accurately getting readings. I suspect that would be a common issue with flashers through the ice though, next time I will attempt to submerge fully to see if it makes a difference, I was not prepared this time. When Centered in the hole it would work, so I drilled a second hole and let the Garmin freeze in center and all was good.
Question:	Can you do a split screen of the ice flasher and the 2D sonar at the same time
Answer:	No, that is not currently possible. It's one or the other

Product features

SONAR MADE SIMPLE

Easy-to-use STRIKER Cast device streams and displays sonar on a simple phone app interface. Setup is a snap. And scans of fish and structure locations are easy to interpret.

THREE STEPS TO START

Download the free STRIKER Cast app for your compatible smart devices. Pair it with the STRIKER Cast sonar unit. Now go fishing.

ANY WATER WILL DO

STRIKER Cast GPS sonar works in freshwater or saltwater (and even for ice fishing) to show you fish and structure in crisp detail. You can use it to check water temperature as well.

GPS FOR CUSTOM MAPS

Built-in GPS provides the ability to create custom Quickdraw fishing maps with 1’ contours, so you can remember (and maybe share) where you found that great fishing spot.

SONAR MODES

Select from easy-to-interpret traditional 2-D sonar and ice fishing flasher modes, with setting adjustments for gain, range and more.

FISH ICONS

To make using sonar even simpler, turn on fish icons to view graphic images of fish targets and their depth readings, so you’ll know exactly where to drop your line.

RUGGED BY DESIGN

This durable, lightweight sonar device is built to last and easy to cast, using a 20 lb test weight or higher fishing line. It’s also water-resistant to IPX6 and IPX7 standards.

POWER SAVVY

To conserve battery life, STRIKER Cast automatically powers on when it’s floating in water — and turns off when it’s not.

EXTENDED BATTERY LIFE

How long can you fish? The internal, USB-rechargeable battery lets you go for more than 10 hours between charges. (Battery life may vary depending on usage.)

Product description

Find more fish using the ECHOMAP™ UHD 93sv combo with a bright, sunlight-readable 9” touchscreen with keyed assist. The included GT54 transducer provides Ultra High-Definition Clearly and SideVü scanning sonars, so you get crystal-clear images of what is around and below your boat, and Garmin high wide CHIRP traditional sonar delivers remarkable target separation. Preloaded LakeVü G3 inland maps with integrated Navionics® data Cover more than 17, 000 lakes with up to 1’ contours. It features a quick-release bail mount, making it easy to remove and take with you. Nmea 2000® and NMEA 0183 network support provides you with engine data, sensor Connection, autopilot integration and more. Echomap™ UHD 93sv is even compatible with the force™ trolling motor for full control of the motor from the screen plus the ability to route to waypoints, follow tracks and more.

• Bright, Sunlight-readable 9” touchscreen with keyed assist
• Includes GT54 transducer for ultra High-Definition clearer and Ultra High-Definition SideVü scanning sonars and Garmin high wide CHIRP traditional sonar
• Preloaded LakeVü G3 inland maps with integrated Navionics data cover more than 17, 000 lakes with up to 1’ contours
• Supports Panoptix all-seeing sonar, including Panoptix live Scope sonar
• Sonar sharing capabilities with other ECHOMAP Plus, ECHOMAP UHD and ECHOMAP Ultra units
• display type: LCD

User questions & answers

Question:	Does this include the lakes that are included on hotmaps premium south or do i need to purchase it separately
Answer:	Yes. Mike, Garmin
Question:	Does this unit come with the transducer cable in the box
Answer:	This unit includes charts for the gulf coast.
Question:	How does the sos work on this unit? do i need a radio connection
Answer:	No, that unit comes with Bluechart g3 coastal mapping built in. Register with Garmin Express and receive one free map date within the first year. Mike, Garmin
Question:	I recently put mine in my boat and am having issues with the touchscreen. Like it foesnt work at all. Do i have to calibrate it
Answer:	The 102sv only has Worldwide base mapping and the 106sv has BlueChart g3 coastal charts and LakeVü g3 inland maps. Mike, Garmin

Product features

Garmin ECHOMAP UHD with GT54UHD-TM transducer

The sunlight-readable 9” touchscreen chartplotter features a quick-release bail mount, and the transducer bundle adds Ultra High-Definition scanning sonar and CHIRP traditional sonar.

SONAR SUPPORT

This chartplotter supports a variety of Garmin transducers (sold separately), including the Panoptix LiveScope scanning sonar system, which lets you see all around your boat in real time.

OPTIONAL TRANSDUCER BUNDLE

Select the transducer bundle to add a GT54 transducer for Ultra High-Definition ClearVü and SideVü scanning sonars, which show you crystal-clear images below and around your boat. Plus, you get Garmin high wide CHIRP traditional sonar for remarkable target separation.

PRELOADED MAPPING

Experience unparalleled coverage and detail with preloaded LakeVü g3 inland maps featuring integrated Navionics data. Maps cover more than 17,000 lakes with up to 1’ contours.

QUICKDRAW CONTOURS

Create personalized fishing maps on-screen with 1’ contours. Keep the data to yourself, or share it with the Quickdraw Community on Garmin Connect.