12 best sjt fish finders

Product description

Following in the success of the STRIKER fish finder series, Garmin is proud to announce the new STRIKER fish finders with ClearVü technology. These devices are designed to allow you to mark your favorite fishing spot and easily navigate back to it tomorrow, saving you time and money. STRIKER series fish finders are available in 3.5-, 5- and 7-inch display sizes.Display resolution:480 x 320 pixels

• The power of simple - offers a keyed interface with dedicated buttons. The device is easy to use and easy to install. Available in 3.5-, 5- and 7-inch display sizes.
• Waypoint map - use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks.
• Chirp sonar - chirp sends a continuous sweep of frequencies which provides a wider range of information. Chirp sonar is able to create crisper fish arches with better target separation.
• Built-in flasher - view your sonar data in the classic flasher format; Ideal for ice fishing or vertical jigging.

User questions & answers

Question:	does it come with the fish finder or is it just the bag and other items
Answer:	It comes with everything you need,the bag, the holder,the battery, the charger,the fish finder with gps tracking, and instructions
Question:	Will this unit show bait fish
Answer:	only if there is big schools
Question:	Planning on having this stricly portable from boat to boat, is it easily installed and removed? Or is drilling required
Answer:	I've take one with me up to Alaska for the last 8 years. Setup is about five minutes on the 14' Lunds we rent up there.After the first time, the transducer cable length is established so stuff it in the side pouch at the end of the day. The rest of the cable stays wrapped up on the hanger inside the portable unit.The unit is very stable and sits nicely on the bench in front of me, even in the bumps.I keep a Scotchbrite pad in another pouch on the unit. Scrub a spot on the transom before sticking the suction cup on.I keep some tiewraps in the side pouch. Use a tiewrap to tie off the transducer cable to something on the boat. The suction cup holds up to 20 mph... until it doesn't. Tiewrapping the cable to the boat keeps the transducer out of the prop.
Question:	What does the bundle come with? Battery? Tranduser for ice fishing
Answer:	STRIKER 4 Dual-beam transducer Tilt/swivel mount Portable bag Base/handle Suction cup mount Foam float Kayak In-hull Transducer Mount Power cable Rechargeable battery AC charger Documentation
Question:	Please i need a trasceduser cable replacement. How much will it cost me
Answer:	Usually we didn't sell the transducer alone. If you already bought fish finder from us before, please contact us through amazon message and we will give you the offer for the transducer alone.
Question:	It works in salt water
Answer:	Yes,this Lucky fish finder can work well in salt water. It is suitable for ocean、lakes and rivers. Hope this helps.
Question:	can you mount the transistor in side the kayak
Answer:	Usually people will fix the transducer on the hull of the kayak (the outside). Because the transducer can only be working when it touches the water.
Question:	Does it work well for ice fishing
Answer:	Yes it works well for ice fishing, although you must drop the transducer below the ice in order for it to read depth accurately. I also found that it has the potential to mis-detect large tube jigs as a fish, but I actually don’t mind that as it tells me how deep my bait is. I also use this with my kayak mounted with the bracket, so I get double duty. Battery life is fantastic even in below zero temps. I’ve been out with it on several outings below freezing and I’m still on the same set of batteries! I would recommend this product.
Question:	What's the RMS on these subs
Answer:	I think it’s 1200 but i am not sure. I have four of them running at 2ohms with a planet audio torq 5000.1 amp. One of the loudest trucks in town.

Product features

Function

• Well understand the water depth and fish location by the portable fish finder.
• The fish finder portable gives you alerts when fish and fish schools passing by.
• 5 modes sensitivity options enable you to use the kayak fish finder in different fishing environments.
• The kayak fish finder can be used in different ways, such as on ice, fixed to kayak, put it into a hole or float it on water surface.
• You can understand the composition of the bottom contour. Sands, rocks and weeks will be shown on the LCD display.

Specification

• 2inch TN/ANTI-UV LCD Display.
• Blue LED Back lighting.
• Measurement Unit: FT/M
• 1.81inch diameter transducer sensor.
• Detect Depth Range: 3ft~328.08ft (0.6m~100m) under sensor.
• Sensor coverage range: 45 degrees beam angle in 200Khz.
• Sensor Operating Temperature: 14°F to 122°F(-10°C-50°C) .
• Cable Length: 25ft (7.62m)
• Powered by: 4 x AAA batteries (not included)

For Kayak Fishing

1. Attach the Side-Scan Adapter to the boat hull using the mounting tabs.
2. Break though the hull of a boat. Place the fishing sonar sensor against the hull bottom 1 inch underwater.
3. The moving speed of kayak should be below 5mph.

For Ice Fishing

1. You should clear the snow on the ice layer. Make sure the surface is smooth enough. Put the LUCKY fish finder portable directly on ice layer to detect fish distribution in purpose of selecting a place to drill a hole.
2. There should be no air between the sensor and the ice and no air between ice layer and the underwater either. Otherwise, the portable fish finder will not work properly.
3. Cut a hole through the ice and put the fishing sonar sensor directly in the water. Enjoy the fishing gear

For Shore Fishing

1. Fixed the removable float on the cable.
2. Cast the fishing sonar transducer into water as far as you can.
3. You can cast the fishing sonar transducer either by your hand or by the fishing rod.

STRIKER 4 Portable Bundle

3.5-inch CHIRP Fishfinder with GPS and Portable Kit.

Navigate Easily with Waypoint Map

Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It’s also a great tool for finding your way back to the boat ramp.

Check Your Speed on Screen

You can quickly and easily see your boat’s speed on the screen of your STRIKER fishfinder. It’s a great tool to make sure you are trolling at the right speed for the lure you’re using and for a particular fish species. It’s also a good way to tell if you are going the right speed in wake-controlled areas.

Take Your Fishfinder Anywhere

A portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it’s perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.

Experience the Clarity of CHIRP

STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.

Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.

You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what’s below.

• ◆ Fishes and bottom contour readout: LUCKY fish finder portable detects and displays water depth, approximate fish location, short & tall weeds, sand & rocks on bottom. Fish finder portable design gives you another option to hang it around neck.
• ◆ The kayak fish finder suits for variety fishes fishing environments: It can be used for off shore fishing, kayak fishing, ice fishing, lake fishing, sea fishing and so on. You can also use handheld fish finder on the moving kayak with speed below 5mph.
• ◆Depth readout: The fish finder portable detector range is in a 45°cone underwater. The detection of depth range is from 3ft(1m) to 328ft (100m) below fishing sonar transducer. The water depth can be shown either in feet or meter. The fishing sonar sensor is with 25 ft cable and removable transducer float.
• ◆ Small portable fish finder with powerful functions: 5 modes sensitivity options; battery save mode; backlight mode; fish and fish school alarm. Normally fishing depth finder supports 4-5 hours continuous working with brand new batteries. Open battery save mode can be working even longer.
• ◆ Warranty Policy: We offer 12 months warranty for LUCKY fish finder portable. It will be one of your best fishing kayak accessories. Any questions before or after purchase, please feel free to contact us via Amazon message (response within 24 hours every day online).

User questions & answers

Question:	Please i need a trasceduser cable replacement. How much will it cost me
Answer:	no, you will need a big one. Jack-Hammer would be best.
Question:	It works in salt water
Answer:	I'am not sure about basalt rock but to give you a example it was slow braking 8" concreat but did the job.I have used it on many projects it works very well.
Question:	can you mount the transistor in side the kayak
Answer:	If it is a steel rod, then most likely. This thing will easily break rocks. You will need some kind of driver bit to fit it. If the rod is very long it may be difficult to lift the tool above the rod to get it started.
Question:	Does it work well for ice fishing
Answer:	Some type of cast metal, not plastic.

Product features

Function

• Well understand the water depth and fish location by the portable fish finder.
• The fish finder portable gives you alerts when fish and fish schools passing by.
• 5 modes sensitivity options enable you to use the kayak fish finder in different fishing environments.
• The kayak fish finder can be used in different ways, such as on ice, fixed to kayak, put it into a hole or float it on water surface.
• You can understand the composition of the bottom contour. Sands, rocks and weeks will be shown on the LCD display.

Specification

• 2inch TN/ANTI-UV LCD Display.
• Blue LED Back lighting.
• Measurement Unit: FT/M
• 1.81inch diameter transducer sensor.
• Detect Depth Range: 3ft~328.08ft (0.6m~100m) under sensor.
• Sensor coverage range: 45 degrees beam angle in 200Khz.
• Sensor Operating Temperature: 14°F to 122°F(-10°C-50°C) .
• Cable Length: 25ft (7.62m)
• Powered by: 4 x AAA batteries (not included)

For Kayak Fishing

1. Attach the Side-Scan Adapter to the boat hull using the mounting tabs.
2. Break though the hull of a boat. Place the fishing sonar sensor against the hull bottom 1 inch underwater.
3. The moving speed of kayak should be below 5mph.

For Ice Fishing

1. You should clear the snow on the ice layer. Make sure the surface is smooth enough. Put the LUCKY fish finder portable directly on ice layer to detect fish distribution in purpose of selecting a place to drill a hole.
2. There should be no air between the sensor and the ice and no air between ice layer and the underwater either. Otherwise, the portable fish finder will not work properly.
3. Cut a hole through the ice and put the fishing sonar sensor directly in the water. Enjoy the fishing gear

For Shore Fishing

1. Fixed the removable float on the cable.
2. Cast the fishing sonar transducer into water as far as you can.
3. You can cast the fishing sonar transducer either by your hand or by the fishing rod.

Product description

Following in the success of the Striker fish finder series, Garmin is proud to announce the new Striker fish finders with ClearVu technology. These devices are designed to allow you to mark your favorite fishing spot and easily navigate back to it tomorrow, saving you time and money. Striker series fish finders are available in 3.5-, 5- and 7-inch display sizes. Display resolution: 480 x 320 pixels.

• Clear Vu scanning Sonar shows you more of what is in the water around your boat; This high frequency sonar gives near photographic images with detailed representations of objects, structure and fish
• The power of simple offers a keyed interface with dedicated buttons; The device is easy to use and easy to install; Available in 3.5, 5 and 7 inch display sizes; Water rating IPX7
• Waypoint map: Use the way point map to easily view, mark and navigate to locations such as brush piles, stumps and docks; Maximum depth 1,600 feet freshwater, 750 feet saltwater; Current draw at 12 volt: 0.23 Ampere
• Chirp Sonar sends a continuous sweep of frequencies which provides a wider range of information; Chirp Sonar is able to create crisper fish arches with better target separation
• Built in flasher: View your sonar data in the classic flasher format; Ideal for ice fishing or vertical jigging. Display size: 1.9 x 2.9 inches (4.9 x 7.3 centimeter); 3.5 inches diagonal (8.7 centimeter)

User questions & answers

Question:	Does this come with a transducer
Answer:	Yes mine came with a transducer. It came with everything needed to set up and be ready to go as if you never had a fish finder before. Although the two wire clamps to hold your cable for the transducer are fragile, I recommend getting new ones
Question:	Does this unit also give depth readings of the water
Answer:	Yes! Depth, temperature, speed you're moving, time of day etc. this is an awesome unit for the price
Question:	does the power source (12 volt i've read) come with the package, or do i need to purchase that
Answer:	Yes you can and I have done just that. You can get it all here on Amazon. There are plenty info doing just this on the internet. Just assemble these parts. Here is what I have. When done I have it mounted via Scotty #141 Kayak/SUP Transducer Mounting Arm with Gear-Head https://www.amazon.com/gp/product/B0174X6T5A/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Battery is https://www.amazon.com/gp/product/B006LO9XHA/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 The box it fits in is https://www.amazon.com/gp/product/B011ZB4NLO/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Switch is https://www.amazon.com/gp/product/B011ZB4NLO/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Uxcell a12110200ux0689 Waterproof Connector Cable Gland is https://www.amazon.com/gp/product/B00AOBGQ26/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Question:	Does it has map of Middle East Kuwait
Answer:	yes but its top secret

Product features

STRIKER 4

3.5-inch CHIRP Fishfinder with GPS.

Navigate Easily with Waypoint Map

Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It’s also a great tool for finding your way back to the boat ramp.

Check Your Speed on Screen

You can quickly and easily see your boat’s speed on the screen of your STRIKER fishfinder. It’s a great tool to make sure you are trolling at the right speed for the lure you’re using and for a particular fish species. It’s also a good way to tell if you are going the right speed in wake-controlled areas.

Take Your Fishfinder Anywhere

A portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it’s perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.

Experience the Clarity of CHIRP

STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.

Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.

You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what’s below.

Product description

The striker Plus 5cv Fishfinder with a bright 5” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP Clearly scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat's speed.

• Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
• Built-in Garmin Quickdraw Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed. Frequencies supported : Traditional: 50/77/200 kHz
• Bright, sunlight-readable 5” display and intuitive user interface
• Rugged design for every fishing environment. Display resolution: 800 x 480 pixels

User questions & answers

Question:	How long is the cord from the transducer to the unit itself
Answer:	On my Sun TRACKER 16 foot easily reaches from the battery to the display. Transponder on the front reaches to the counsel.
Question:	Does this gps have a chip slot
Answer:	No again you need too buy a different model....
Question:	Will this work on a Kayak, will the transducer fit through the scupper holds
Answer:	You only need to run the transducer wire and plug up through your scupper hole to and plug it into the back of the unit. No need to fit transducer through scupper.
Question:	Con que accesorios viene este gps
Answer:	transductor y kit de instalacion

Product features

Garmin Striker Plus 5cv with Transducer, 5" GPS Fishfinder

The STRIKER Plus 5cv fishfinder with a bright 5” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP ClearVü scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.

Garmin Quickdraw Contours

Nobody knows the waters you fish better than you and your fellow fishermen. While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been. No special knowledge is required.

Product description

The Start smart sonar is an easy-to-use, wireless, Cartable fish finder for recreational bank, dock or shore fishing. Paired with the USER-FRIENDLY Deeper app, you’ll be able to see fish location, their size and suspended depth as well as underwater bottom contour, hardness and vegetation. It easily casts out and scans down to 165 ft. Now you’ll spend more time catching and less time searching, sweating and cursing. The start utilizes smart technology to send sonar readings directly to your Smartphone via the Deeper app and Wi-Fi. You do not need an internet connection or cellular data for the fish finder to work. It has its own Wi-Fi, totally independent of your smartphone, so it will work anytime, anywhere. Wi-Fi connectivity is better than Bluetooth, faster and stronger. The start is very lightweight and conveniently fits in a tackle box or even your pocket. It’s an eye-catching shade of orange so you can easily spot it on bright, sunny days. It turns on and off automatically when in contact with water and has a night light sensor. The 6-hour continuous usage Battery life Ensures a full day of fishing fun. From weekend Warriors and casual anglers to parents wanting to get their children outdoors, it’s the perfect tool to make your fishing experience A-M-A-Z-I-N-G.

• * Portable, cartable wireless fish finder for family trips, fishing with friends or casual anglers.
• Utilizes smart technology with Wi-Fi connectivity. No mobile data or internet required. The START generates its own Wi-Fi signal, anytime, anywhere.
• Easy-to-use Deeper App displays fish location, depth and size, water bottom contour and vegetation. Download the app for free. Deeper App has over 2 million downloads to date and is updated monthly.
• Casts out to 165 ft. and scans down to 165 ft. with 40° sonar beam for accuracy and coverage. Every scan automatically saved with time and location.
• Automatic night fishing mode, lightweight for comfortable casting, sleek design for easy reeling, 6-hour battery life with 2. 5 hour recharge. Compatible with Android and iOS devices.

User questions & answers

Question:	Can i use my phones 5g data while connected to deeper's wifi signal
Answer:	Android devices will not work with mobile data when connected to this type of wifi direct device.
Question:	Do you guys have an answer for all the reviews saying it has limited range? What would cause this issue
Answer:	Hi there, we do. The maximum connection range that the Deeper Start can achieve is 165 ft. However, the range can be reduced if your smartphone or tablet has a weak Wi-Fi antenna. Other than that, there are couple of steps you can follow in order to get the best kind of connection range, and you can find them here: https://deepersonar.com/us/en_us/manual/maximizing-connectivity
Question:	It says it connects through WiFi. What if there isn't WiFi available? Do I need an internet connection to use this
Answer:	You don’t need a Wi-Fi internet connection or mobile data at your fishing spot! The Deeper device has an internal Wi-Fi access point that you can connect on your smartphone or tablet. All you have to do is to turn on Wi-Fi on your smartphone and connect to Deeper access point. You can connect your Deeper device in any place of the world - even the rain-forest of Amazon.
Question:	I fish in a pond in Florida with lots of turtles. Would the finder show these as fish
Answer:	Thanks for the question! Due to air-bladders, fishes provide a slightly different kind of ultra-sound return compared to other underwater objects, so you shouldn't have any issues - Deeper is smart enough to distinguish what kind of sonar return is a fish or not.

Product features

Deeper Start Fishfinder

The Start smart sonar is an easy-to-use, wireless, castable fish finder for recreational bank, dock or shore fishing. Paired with the user-friendly Deeper App, you’ll be able to see fish location, their size and suspended depth as well as underwater bottom contour and vegetation. It easily casts out and scans down to 165 ft. Now you’ll spend more time catching and less time searching, sweating and swearing.

Comes with user-friendly instruction manual and USB charging cable.

Key Start Features

• Fish Finding – Fish icons in three sizes to indicate size. Fish depth tags so you’ll know where they are in the water column. Fish alarm so you’ll never miss a fish.
• Discover Underwater Details – Displays bottom contour, vegetation and depth scale so you can pinpoint fish feeding spots or ambush points.
• Data Retrieval – All scans automatically saved with date/time stamp and view-able in app History.

How the Wi-Fi Works?

The Start utilizes smart technology to send sonar readings directly to your smartphone via Wi-Fi. You do not need an internet connection or cellular data for the fish finder to work. It generates its own Wi-Fi signal, which syncs with your smartphone, anytime, anywhere. Wi-Fi connectivity is 10x better and more reliable than Bluetooth.

Charging

Make sure your fish finder is fully charged. The Deeper Start charges in 2.5 hours and uses a USB cable that is compatible with any USB port. The battery lasts for 6 hours of continuous usage. Keep in mind that it isn’t necessary to use it continuously, unless you’re having fun scanning.

Connecting

Use the barrel swivel to securely attach the fishing line to your Start fish finder. Place it in the water and it will automatically switch on. Connect to your fish finder via your phone settings. Then, open the Deeper App (make sure it’s up-to-date) to start scanning the water.

Important: Make sure you have turned off all Wi-Fi assistance on your smartphone (e.g., “Wi-Fi Assist” on iOS) or switch off Cellular Data altogether. This will ensure an uninterrupted connection.

Casting

Once connected, you’re ready to cast out. Your Start has a connection range of 165ft. To ensure a solid connection, do not put your phone on the ground or in your pocket. We recommend using the Deeper smartphone mount for your rod.

Scanning

Once your fish finder hits the water, you’ll start to see fish and depth data on your smartphone screen. Slowly reel in the fish finder and you will see changes in depth and fish location. If you don’t see any fish icons, that means there aren’t any fish! Try another spot until you find fish.

Important : The screen will scroll from right to left even if your sonar is stationary. That’s because your fish finder is constantly sending out scanning beams.

Product description

The STRIKER Plus 4 fishfinder with a bright 4.3” display and built-in GPS features CHIRP sonar for crystal-clear images and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.Display resolution: 272 X 480 pixels

• Includes dual-beam transducer with Garmin Chirp traditional sonar for crystal-clear images and remarkable target separation
• Built-in Garmin quickdraw contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed
• Bright, Sunlight-readable 4.3” display and intuitive user interface
• Rugged design for every fishing environment. Frequencies supported: Traditional: 50/77/83/200 kHz, Transmit power: 200 W (RMS)

User questions & answers

Question:	Does this Garmin fish finder comes installed with maps (Marine maps
Answer:	There is no way to put any maps on this unit but it does have storage to make your own maps. It has a mapping feature so you can map the depths of your favorite lake. The specs says it will hold 1 million acres of lake maps. Granted, you have to be on a boat and troll to do the mapping but it does work and it works rather well.
Question:	For in hull transducer mounts for a fiberglass boat, Garmin suggested putting the transducer in a container full of antifreeze. Any other methods
Answer:	I can’t speak to fiberglass as I use mine on kayak. However I do use my transducer shooting thru hull attached with duct seal that forms a reservoir around transducer and then I add water. That works perfectly! Duct seal is $3 at Lowe’s or Home Depot.
Question:	What's the difference between this and the "garmin striker 4 with transducer, 3.5" gps fishfinder with chirp traditional transducer
Answer:	This one has a feature where you can contour maps the bottom of any lake or river you're in.
Question:	how many holes do i need to drill to install the transducer
Answer:	Don't drill holes in your boat. Find an old 3/8-1/2" plastic cutting board and cut a 4x4 piece out of it and using 3m sticky tape mount it to the transom and use short screws to mount the transducer to the piece of cutting board. Did that back in 1979 and has never come loose.
Question:	Whats the maximun depth that it can read
Answer:	It’s in the description I believe. Otherwise YouTube has this information
Question:	Will this work in shallow waters? What is the minimum depth it will read accurately? Read a review where it was said to lose use under 10 feet
Answer:	I know from experience it can read depths as shallow as 1 foot but I don’t know the exact limitations or specs. The problem that renders this and any fish finder useless in shallow water is the amount of vegetation and its direct proximity. In shallow water with dense vegetation reaching the surface you’re most likely only going to see screen noise displayed which may effect the abilities to properly gauge water depths. If there is no vegetation and the ground is of solid structure then this will work fine in water 10’ or less.
Question:	Can the transducer be mounted on the trolling motor
Answer:	Yes it’s come with all the hardware needed to install you might have to change some things depending on your trolling motor
Question:	Will I be able to see the screen with polarized sunglasses
Answer:	Yes you can because I am using as well the polarized glasses with a light yellow tint

Product features

Garmin STRIKER Plus 4 With Dual-Beam Transducer

The STRIKER Plus 4 fishfinder with a bright 4.3” display and built-in GPS features CHIRP sonar for crystal-clear images and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.

Garmin Quickdraw Contours: While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been.

CHIRP Sonar Clarity: The STRIKER Plus 4 fishfinder includes Garmin CHIRP technology for a higher level of clarity and detail that you have come to expect from Garmin. Crystal-clear sonar images provide remarkable target separation and resolution in shallow and deeper water. Bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths for a timely interpretation of what’s below.

• Shows you what is in the water: water depth, approximate fish location (suits for all sorts of fish), fish size(small/medium/big), short & tall weeds, sand & rocks on bottom. Suitable for fishing from a kayak, off the dock, and ice fishing. You can use the fish finder on moving kayak with slowly speed below 5mph (make sure the bottom of the transducer is horizontal).
• Easy to Use: Toss the transducer into water and turn on the display unit, it will show you the water depth and approximate fish depth if fish schools passing by. It has 5 user selectable sensitivity; battery save mode; backlight mode ; fish alarm; unit of measure. Setting can be saved when turned off.
• Very portable that you can take it anywhere: It comes with neck strap that allow you to wear it around neck when you are busy on the kayak. And you can easily store the fish finder in your tackle box. The fishfinder is powered by 4 AAA batteries. It lasts 4-5 hours with new batteries in continuous use. It can be used in fresh water as well as salt/sea water.
• Accurate Depth Reading: The fish finder use sonar to detect water depth and fish location. Sonar Frequency is 200 kHZ. Detectable area is 45 degrees beam angle under the sonar transducer. Detectable depth range is from 3ft/1m to 328ft/100m below the sonar transducer.
• Warranty and Brand Support: The Venterior Portable Fish Finder is covered by a 2-year Warranty. Any issue of the fish finder after purchase, please don't hesitate to contact our brand support (warranty card comes with product in package), we will response within 24 hours every day online.

User questions & answers

Question:	how do you usecthis from the shore
Answer:	Adjust the distance between the float and the transducer, make sure the distance is longer than 7 inch. Use a pole/rod to guide the transducer to a desirable position. If the cable sink to water bottom, please add floats on the cable to allow trhe cable to float on the top of water. Hope this helps.
Question:	Does it have a flasher
Answer:	No, the transducer does not have a flasher.
Question:	Is there anything extra that i need to purchase for this to work?? purchasing for a gift. want everything i need for it
Answer:	No. Toss the transducer into water and it will start working. But if you prefer to attach the transducer on your kayak, you may need to purchase extra screws or adhesive, or suction cup to attach the adapter mounting (included) onto your kayak. More details please write to venterior @ yahoo . com. We are happy to assist you. Sincerely, Venterior
Question:	There are yellow floats for the line, are these available
Answer:	It only comes with a round float for the transducer. It does not include the floats for the line/cable. Your fish finder is eligible for a 2-year warranty. Any question just feel free to contact our brand support on the warranty card or visit our brand website. Sincerely, Venterior

Product features

ICE FISHING

If you would like to check the area for depth or fish before cutting the hole, please clear away snow to expose the ice surface. The ice must be clear, free from air bubbles, voids, cracks, etc. Place a small amount of liquid water on the ice and set the transducer on the water, allowing the unit to freeze to the ice. Cut a hole through the ice and place the transducer directly in the water.

KAYAK FISHING

3 different ways to use the fish finder from a kayak/boat:

1. Toss the transducer and float into the water off the boat side.

2. Attach the side-scan adapter to the boat hull, and attach the transducer to the adapter.

3. Attach the transducer to a handle or a transducer mounting Arm, lower the transducer into the water.

SHORE/PIER FISHING

1. Place the transducer and float in your hand, and toss underhand.

2. Use a pole to guide the transducer to a desirable position.

3. Add a float kit on the cable to allow the cable to float on top of the water.

4. Neatly wind up the excess cable.

FISHING GIFT

If you are looking for some useful fishing gear that can be given as a gift on Valentine’s Day, birthdays, Father’s Day or Mother’s Day, this portable fish finder is one of the best choices. If your family/lover/friend is an avid angler, this makes a great Christmas gift for he/she can go out and use it immediately. They can go fishing off boat in Summer and go ice fishing in Winter with this Venterior portable fish finder.

• Patented sonar fish identifier technology
• LED beacon
• Rechargeable battery and charge status indicator light
• 10+ hrs battery life.Syncs with iOS (Apple) 10.0 and later operating systems and Android 4.3 or later that use Bluetooth Smart (4.0)
• Accurate sonar readings down to a depth of 135'
• 2 Snap swivel connections for use as bobber or as remote fish finder
• Free app on iOS and Android

User questions & answers

Question:	can you cast this by its own with no hook on one pool and cast a compleat ring with another pool. That way the ibobber scans and gives me readings
Answer:	I am considering a release clip on the I bobber to a separate line. It won't work for casting but if you are letting it out in a current it may be neat to see the fish hit the bait. But I would hate to lose it on a fish.
Question:	Can I use it as a simple depth finder white 5mph trolling ? ANd what is minimum depth
Answer:	You may find it tough to troll with it if not impossible. I just use it on my Kayak while paddling and it loses total accuracy. It skips bottom detail and depth is completely inaccurate. It tends to "artifact" on the screen. Also, the 3' minimum is pretty close although at times I've wondered exactly how accurate the depth is.
Question:	does this work with Amazon fire OS
Answer:	I got it working on my 2018 Kindle ...wouldn't know about older or newer models
Question:	Anyone compare the iBobber to the very similar (but 2x more expensive) Deeper portable fish finder
Answer:	Yes. I had the Deeper first, but lost the device in a rainstorm. I decided to get the iBobber as a replacement to the Deeper. The Deepers hardware and software is much more detailed than the iBobbers. The iBobbers only has a 90 degree scan, as opposed to the Deepers 90 degree, and 120 degree scans. The Deeper shows 4 different sizes of fish, along with several types of "fish" alarms. Both offer a 15 minute sonar scan replay.Please note that both sonar bobbers require re-syncing upon each and every use. As the sonar bobbers only turn on when in the water or charging. The Deeper has quicker syncing time than that of the iBobber. If I had to buy another sonar ball, I might first look at the sonar scanners available in a RC boat package. The RC option seems much easier to get the sonar scans "where" you want them, and less water noise when casting your sonar bobbers out. If I had to get another sonar "bobber" I would recommend the Deeper.Does this justify Deepers cost of roughly 2X the iBobber? What the iBobber brings to the table is simple easy to use scanning. The Deeper offers much more than the iBobber in regards to hardware and software

Product features

iBobber Wireless Fish Finder

The mobile fish finder and app that you can bring with you wherever you fish. The iBobber was designed with portability and flexibility in mind so anglers of all skill levels and types could take the latest in portable sonar fish finding technology with them on the go. Using an iPhone or Android mobile device anglers can mark fish, map depth contours and underwater structure, save water temp, weather and location, species, photos and hot spots and choose to share on social media directly if desired.

The iBobber is one of the best personal fish finder on the market for fishing from shore and docks, and is ideal for kayak, raft or canoe fishing and for bottom sounding areas not accessible by boat. It works in saltwater and freshwater, and is very effective at locating fish and structures on ponds, lakes, streams, and rivers. It even works for ice fishing.

The free app syncs via Bluetooth Smart to the iBobber device, and allows you to map waterbeds, mark spots, log water temps and depth, add lures, species, and photos in the trip log. The built-in LED beacon, and the strike and fish alarms, are great for ice fishing, carp, and night fishing. The high contrast design and the app’s anti-glare setting increases visibility in bright outdoor lighting.

Fishing Gifts

Do you have an angler or outdoors lover in the family for whom you'd like to buy some fishing gear for but don’t know what to get? Are you an angler worried that your spouse is going to spend a bunch of money on some gear you don’t need or already have? In either case we have a great solution for you. The iBobber portable fish finder and app is a great fishing gift for the angler on the go, the young angler just getting into fishing and even the seasoned pro with all the gear imaginable. There are several reasons why we think the iBobber makes a great fishing gift at the holidays, on birthdays, Father’s Day or Mother’s Day. The relatively low price and high quality are immediate advantages and even for the fisherman who has everything, including a fishing boat and lots of gear, chances are they don’t have a portable fish finder in their tacklebox.

A lot of anglers are very picky about their gear, especially rods, reels and lures and the iBobber is a great new piece of tackle that they most likely don’t already have. The iBobber is a personal sonar device that helps anglers catch fish in a wide variety of situations and will augment anyone’s individual fishing style. Plus, it’s cool and uses the latest in sonar and mobile phone technology and anyone who loves tech will enjoy using the iBobber. You can think of it as an iPhone fish finder or Android fish finder and it even works with the Google Watch and iWatch.

If your favorite angler loves ice fishing it makes a great Christmas / Holiday season gift because they will be able to go out and use it immediately. The iBobber and app are ideal tools for ice fishing due to the light weight and portability, making it easy to bring along on the ice, but also for the ice fishing features like the fish alarm, when fish are present, trip log to save your favorite spots, water temps, depths and species caught and GPS marking for future trips.

The app is free and so it’s especially useful for sharing with others like when camping or at a house on the water where lots of people come and fish and folks take out rafts, canoes, kayaks, rowboats, jonboats etc. The light weight and portability are features that make it perfect for camping, RVing and hiking trips and for times when using a boat is not practical or allowed. If the angler in your family has their phone, the ultralight iBobber and their current fishing gear they can find fish anywhere they go.

Shore Fishing

Catching more fish from shore requires some preparation and using a castable fish finder is a great way to figure out what the bottom looks like. The iBobber is one of the lightest of the portable fish finders that can be cast long distances to map the bottom contours and locate schools of fish or structure, ledges and holes where the big ones lurk. You can GPS mark spots, laydowns (trees that have fallen), weed beds, dropoffs and other underwater structure where fish might be lying in wait to ambush baitfish.

Dock and Pier Fishing

The iBobber is great addition to your tackle bucket for pier fishing. You’ll have the advantage over all the other anglers who don't know where the fish are. Whether in freshwater or at the ocean, just cast out to map the waterbed, mark fish and save GPS locations and you’ll catch more and larger fish every time. Use the iBobber fishfinder feature to locate and warn you when schools of fish gather under docks and piers and use the fish alarm to let you know when they are biting.

Kayak and (SUP) Fishing

Portable watercraft fishing is the fastest growing segment in the fishing industry and for good reason. Whether fishing in saltwater for redfish or freshwater for large or smallmouth the appeal of these craft is obvious, especially when many great fishing waterways don’t allow powered watercraft. There’s something primeval about getting closer to nature and your targets and doing battle with a big fish from a small boat. The iBobber is one of the perfect kayak accessory as a fish and depth finder that doesn’t require permanent installation and allows for reach beyond the hull.

Ice Fishing and Night Fishing

If your favorite angler loves ice fishing it makes a great Christmas / Holiday season gift because the recipient will be able to go out and use it immediately. The iBobber and app are ideal tools for ice fishing due to the light weight, portability and the fish finder and fish alarms, that let you know when fish are present and when they bite. Also use the trip log to save your favorite spots, water temps, depths and species caught and GPS marking for future trips.

Product description

The DepthTrax 2B is an updated version of DepthTrax 1B. Following years of exhaustive R&D and field testing, we've updated the SONAR algorithms of the DepthTrax 2B to literally reach new depths. Now able to reach depths of 600 feet and tuned for high speed performance, the DepthTrax 2B reaches deeper and performs faster than any depth finder we've ever produced. The DepthTrax 2B delivers a combination of performance and affordability unrivaled in any other depth sounder. The foundation of the DepthTrax 2B is our proprietary algorithmic programming, which significantly reduces false readings and products unmatched precision. Depth readings are updated four times per second on the no glare, polarized LCD icon display. We've even incorporated a waterproof plud and play transducer connector and a waterproof fuse holder. Finally, we've perfected customization with our patented interchangeable face/bezel system. The DepthTrax 2B includes white/black face-plates and trim rings, allowing custom matching to most boat dash configurations. We even throw in a storage sun cover for good measure. The DepthTrax 2B comes standard with HawkEye's exclusive high-speed, dual-mount transducer that can be transom mounted or glued inside most boat hulls.

Ideal for power boaters and sailors, the Norcross Hawkeye DF1000D Depth Sounder delivers instant depth updates to help keep you safe in the water. Featuring auto-ranging and auto-sensitivity features, the DF1000D gives precise depth readings (in feet or meters) from 2.5 to 200 feet at speeds up to 63 miles per hour. It also incorporates an advanced three-stage depth alarm warning system with programmable shallow and deep water alarms, while the "Keel-Offset" function allows readings to be adjusted for vessel draft.

Today's high-tech, multipurpose depth sounders and fish finders are designed to produce a range of readings, from bottom contour, fish location, and thermoclines, to a variety of other useful sonar data. However, the technology used to decipher between these different signals, coupled with the configuration of their specialized transducers, greatly reduces their ability to give instant bottom readings while on plane. The DF1000D, on the other hand, gives you reliable reading while you're running your boat. Its easy touch, algorithmic, digital programming, waterproof front face, and large, 1.65 x 0.85-inch, illuminated display give you everything you need to make each trip safe and productive. For added convenience, the included transducer can be transom-mounted or glued in.

The DF1000D comes with a two year warranty.

• Delivers uninterrupted depth readings from 2.5 to 600 feet on the largest display available on an In-Dash Depth Sounder up to 60 mph
• ShootThru sonar technology allows for depth readings through solid fiberglass hulls and up to 1/8-inch aluminum hulls
• 3-stage Advanced Warning System clearly signals an alarm condition with an audible alarm, an ultra bright red LED warning light and LCD alarm indicators
• No glare, polarized LCD icon display with storage sun cover allows for spot free viewing with or without sunglasses; Algorithmic programming significantly reduces false readings and produces unmatched precision
• HawkEye products are manufactured both in the USA and overseas using technology designed and developed with American ingenuity

Product features

HawkEye DT1B Digital Depth Sounder

Automatic Range & Sensitivity Delivers Uninterrupted Depth Readings From 2.5 to 200 Feet in 1/10th Precision.

- Adaptive Software Programming Minimizes False Readings.

- Dual Depth Alarms Warn of Shallow or Deep Water.

- Keel Offset Adjusts Depth Readings for Vessel Draft.

- Glare-Free Display with SoftGlow Backlighting.

- Interchangeable Face Plates & Trim Rings.

- Marine Grade Plug & Play Connectors.

- Free Access to Our Online Technical Support System.

- Industry Leading 2 Year Warranty.

Why the HawkEye DT1B?

Today's high-tech, multipurpose fish finders are designed to produce a range of readings from bottom contour, fish location, and thermoclines, to a variety of other useful sonar data. However, the technology used to decipher between these different signals coupled with the configuration of their specialized transducers greatly reduces their ability to give instant bottom readings. The HawkEye DT1B Depth Sounder is engineered to give precise depth readings from 2.5 to 200 feet, at speeds over 60 mph. Say goodbye to the days of not knowing the depth while running your boat on plane.

Product description

The worlds easiest fish finder, HOOK2-4x Bullet offers simple menus, easy access to key functions and Auto tuning sonar Powered by proven Lawrence performance, HOOK2-4x features wide-angle, Broadband sonar coverage Just plug it in and fish Yes, it's that easy

• EASY TO USE: The Lowrance HOOK2 4x Fish Finder features auto-tuning sonar and phone-like menus giving you more time to spend fishing and less time dealing with settings.
• WIDER SONAR COVERAGE: The HOOK2 4x offers a wide-angle sonar cone giving you double the coverage of traditional fish finders.
• EASY SETUP: A single transducer can be mounted on the transom, inside the hull, on the trolling motor or through a scupper hole.
• TRANSDUCER INCLUDED: The included Bullet Skimmer transducer gives you traditional 2-D sonar (fish arch) views.

User questions & answers

Question:	Does it do well on pontoon boats
Answer:	Thank you for your inquiry. The Hook2 4X unit will work well on a pontoon boat. You can contact us at [email protected] for mounting tips. We will be happy to assist you.
Question:	Does this come with a cover
Answer:	My unit didn't come with a cover .
Question:	Hola Mide la profundidad en metros
Answer:	Thank you for your inquiry. The Hook2 4X does have the ability to change the units of measure to meters instead of feet. We hope this information is helpful.
Question:	Does it record
Answer:	To my knowledge it does not record

Product features

Solarmax Display

Get crisp and clear views of fish and fish-holding structure with the excellent clarity and daylight visibility of a high-resolution Solarmax display.

Autotuning Sonar Settings

You will spend more time fishing and less time dialing in your sonar with HOOK2 Autotuning sonar. Just plug it in and fish. It doesn't get any easier.

Built-In Mapping*

Easily find depth changes, roadbeds or your favorite fishing spot on the built-in, high-detail U.S. map in HOOK2, featuring 1-foot contours or more than 3,000 lakes.

*Not available on X models.

Micro SD Slot*

Save your waypoints, routes and trails to a microSD card or upgrade your mapping with an optional chart card.

*Not available on X models.

Product description

At Hummingbird, innovation is the core of everything we do. The new HELIX Series is no exception-delivering our full array of technologies, including the intuitive REFLEX interface, precise Broadband CHIRP, incredible Imaging SONAR and the mapmaking power of Auto Chart Live. Fueled by DNA that is unmistakably Hummingbird, the HELIX Series also features a jaw-dropping industrial design. From top to bottom, it's plain to see that finding fish runs in this family. HELIX 5 SONAR G2 | HELIX 5 Series | 410190-1

​The HELIX 5 Sonar G2 with our new user interface and operating system, features ​a brilliant 800H x 480V, 5" 256 color display with backlight.  Dual Beam PLUS sonar with 4000 watts PTP power output. Maximize your angling experience with the Hummingbird HELIX 5 Sonar G2 fish finder system. HELIX 5 SONAR G2: 480 X 800 5" WVGA Display, Sonar w/ Dual Beam, Temp

• 5-Inch Color WVGA Display
• Dual Beam PLUS Sonar
• 4000 watts PTP power output
• Power Draw = 650 mA (Milliamps) . Power Input = 10.8-20 VDC (voltage direct current )

User questions & answers

Question:	Will this unit pick up the thermocline point? also is it sensative enought to wath your own jig on the bottom
Answer:	You can see jig. Dont know about thermocline.
Question:	What is chirp
Answer:	Go to this link. It gives you a complete explanation. https://www.westmarine.com/WestAdvisor/Understanding-CHIRP-Scanning-Sonar
Question:	Its shows gps speed as optional. Will the unit be shipped with gps speed if purchased
Answer:	I did not purchase the Helix 5 with GPS. However, if the unit is purchased with GPS, it will show the speed.
Question:	Its shows gps speed as optional. Will the unit be shipped with gps speed if purchased
Answer:	No

Product features

Humminbird HELIX 5 G2 Series Fish Finders

There’s no such thing as 'too early' or 'too far.' High expectations go with the territory. The HELIX 5 Series answers the call with an uncompromising widescreen color display. Available on select models, Humminbird CHIRP Digital Sonar and Imaging Sonar reveal the lake bottom, while GPS mapping, AutoChart Live and Humminbird Basemap show you the way.

Feature for feature, it has what it takes to win the day. Do you? No doubt.

Includes transducer and mounting hardware, power cable and gimbal mounting bracket.

2D Sonar

If your goal is to locate and see fish more clearly, start here. Humminbird’s 2D sonar offerings are far from two-dimensional. Whether you’re fishing freshwater lakes, coastal waters or the ice, you’ll find the right solution for your environment and prey.

SwitchFire

SwitchFire lets you control the way your returns appear. With two display modes—Max Mode and Clear Mode—you can choose how much detail, including fish, structure and thermoclines, you want to see or un-see.

Dual Beam

With a wide beam for more search area or a narrow beam for more precision, DualBeam shows you fish and the bottom. DualBeam Plus lets you combine the two beams for even more detail.

Digital CHIRP

CHIRP stands for 'Compressed High Intensity Radar Pulse.' That’s a fancy way of saying it can show you fish that other forms of 2D sonar can’t. How’s that? CHIRP scans the water for fish similar to the way the seek function on your truck’s radio scans the airwaves for FM stations. By covering a wide range of frequencies, CHIRP produces more accurate, more detailed returns of fish, structure and the bottom.

Imaging - It's all in the details

Amazing Humminbird Imaging sonar shoots high-frequency beams below the surface to reveal structure, cover and contours with crystal clarity.

Side Imaging - Nowhere to Hide

Gain an unprecedented, side-to-side perspective on the world below the surface with Side Imaging. In an instant, the ultra-thin beam scans the area to the left and right of your boat location. The return image for each slice is then added to the images taken immediately before and after to build an incredible view of the lake bottom. (image displays MEGA Side Imaging)

Down Imaging - Look Out Below

Get a fish-eye’s view of what’s happening below your boat with Down Imaging. These incredible images are created with high-frequency sound waves emitted in ultra-thin slices. The sonar returns from these waves produce a 'portrait.' As you patrol the water, you’ll watch timber, brush, bridge pilings, rocks and any other structure pop with stunning detail. (image displays MEGA Down Imaging)

Built-In Basemap - Ready to fish, right out of the box

We’ve enhanced our standard Basemap to deliver more detail and a superior angling experience. The Humminbird Basemap is built into all SOLIX Series and GPS-equipped HELIX Series G2/G2N models. Based on freshwater data from LakeMaster and NOAA, the most-trusted saltwater source, these accurate maps provide you with a clear view of underwater terrain. Identify buoys, daymarkers, hazards, marinas and countless other navigation aids and points of interest with our comprehensive icon system. You’ll also see contours, depth markings and, for coastal areas, spot soundings. On the water, confidence is key. And the Humminbird Basemap delivers.

Autochart Live - Create your map-sterpiece (On select models)

Build richly detailed maps of your favorite fishing spots in real time with Humminbird AutoChart Live, available on the SOLIX Series and all GPS-equipped HELIX Series models. Map the water as you drive the boat, with eight hours of built-in recording time. Once your map is live, view it with vegetation, bottom hardness and depth contours to locate the best fish-holding areas. Also, use it with i-Pilot Link Follow and other patented Humminbird LakeMaster features. The future of digital charting has arrived. Better get on board.

Navigation - Built-In GPS

Get unparalleled GPS technology out of the box. Many Humminbird fishfinders have our powerful Precision GPS/WAAS receiver built right in and provides fast position fixes accurate within 2.5 meters. For those models without it, there are several options: Add the Humminbird Precision GPS/WAAS receiver for permanent GPS capability on your boat. Use Humminbird’s adapter and the NMEA output on your own handheld GPS unit, or use Humminbird’s InterLink to allow two fishfinders to access one GPS receiver.

Product description

The FishTrax 1C is for experienced anglers who demand a high-definition fishing experience. It incorporates a full-color, high-definition VirtuView TFTN display and has three operating modes: Fish Finder, Data and Ice-More Digital Flasher. The Fish Finder mode identifies the presence of fish, bottom contour and composition, and the overall depth of the water on the HD color display. The Data Mode enlarges depth, temperature and battery voltage readings so they are easy to read from several feet away while allowing the fish finder to run in the background so that you can keep an eye out for optimal fish habitats. The Ice-Mode Digital Flasher gives you real-time FishTrax sonar echoes like a traditional flasher, perfect for targeting suspended fish while ice fishing. The FishTrax 1C also incorporates user-selectable, dual-beam FishTrax Intelligent Sonar which allows fine-tuning of the fish finder to adapt to any fishing style or platform. It has a 100-level sensitivity adjustment, multi-level depth ranges, and auto-zoom bottom tracking. Integrated fish and depth alarms intensify prey targeting.

• FishTrax intelligent sonar delivers precise fish finder readings up to 240 feet
• VirtuView HD color display with LED Backlight produces a glare-free view for excellent readability
• Sonar sensor is trollable, boat mountable, and floatable to achieve unmatched, go anywhere, portability
• Offers FishArc and FishID fish finder indicators with fish depth targeting along with HD bottom landscape imaging; Algorithmic software programming minimizes false readings and sounds an audible fish alarm signaling the presence of fish
• HawkEye products are manufactured both in the USA and overseas using technology designed and developed with American ingenuity

User questions & answers

Question:	Can anyone tell me how long four aa batteries last in either the 1x or 1c? i'm assuming the 1c eats up batteries more than the 1x
Answer:	I have the 1C, It uses AAA not AA. A set will last about 6 hours. That's non stop use. I wanted to make a AA converter to get a longer run time because when we're out fishing, we won't be back at camp for 8 to 10 hours. I would always use good name brand batteries. you can chew through batteries.
Question:	Like to find out if the hawkeye ft1px fishtrax portable dot matrix fish finder would work while trolling at a slow speed
Answer:	Hi. Nope. Have three of these. That's with the stock transducer. BUT, they sell a high speed transducer that I'm going to install shortly. Hope that helps, need to be at a standstill. Good hunting..... Paul
Question:	Does this one use the AA batteries
Answer:	It uses 4 AAA batteries.
Question:	Is this responsive with a jig
Answer:	Yes, You can certainly watch your jig while ice fishing. See this article that also has an image that a customer sent in: https://support.norcrossmarine.com/hc/en-us/articles/360045152253-Can-you-you-see-the-jig-on-the-FishTrax-1C-while-icefishing-
Question:	Please i need a trasceduser cable replacement. How much will it cost me
Answer:	Usually we didn't sell the transducer alone. If you already bought fish finder from us before, please contact us through amazon message and we will give you the offer for the transducer alone.
Question:	It works in salt water
Answer:	Yes,this Lucky fish finder can work well in salt water. It is suitable for ocean、lakes and rivers. Hope this helps.
Question:	can you mount the transistor in side the kayak
Answer:	Usually people will fix the transducer on the hull of the kayak (the outside). Because the transducer can only be working when it touches the water.
Question:	Does it work well for ice fishing
Answer:	Yes it works well for ice fishing, although you must drop the transducer below the ice in order for it to read depth accurately. I also found that it has the potential to mis-detect large tube jigs as a fish, but I actually don’t mind that as it tells me how deep my bait is. I also use this with my kayak mounted with the bracket, so I get double duty. Battery life is fantastic even in below zero temps. I’ve been out with it on several outings below freezing and I’m still on the same set of batteries! I would recommend this product.

Product features

Function

• Well understand the water depth and fish location by the portable fish finder.
• The fish finder portable gives you alerts when fish and fish schools passing by.
• 5 modes sensitivity options enable you to use the kayak fish finder in different fishing environments.
• The kayak fish finder can be used in different ways, such as on ice, fixed to kayak, put it into a hole or float it on water surface.
• You can understand the composition of the bottom contour. Sands, rocks and weeks will be shown on the LCD display.

Specification

• 2inch TN/ANTI-UV LCD Display.
• Blue LED Back lighting.
• Measurement Unit: FT/M
• 1.81inch diameter transducer sensor.
• Detect Depth Range: 3ft~328.08ft (0.6m~100m) under sensor.
• Sensor coverage range: 45 degrees beam angle in 200Khz.
• Sensor Operating Temperature: 14°F to 122°F(-10°C-50°C) .
• Cable Length: 25ft (7.62m)
• Powered by: 4 x AAA batteries (not included)

For Kayak Fishing

1. Attach the Side-Scan Adapter to the boat hull using the mounting tabs.
2. Break though the hull of a boat. Place the fishing sonar sensor against the hull bottom 1 inch underwater.
3. The moving speed of kayak should be below 5mph.

For Ice Fishing

1. You should clear the snow on the ice layer. Make sure the surface is smooth enough. Put the LUCKY fish finder portable directly on ice layer to detect fish distribution in purpose of selecting a place to drill a hole.
2. There should be no air between the sensor and the ice and no air between ice layer and the underwater either. Otherwise, the portable fish finder will not work properly.
3. Cut a hole through the ice and put the fishing sonar sensor directly in the water. Enjoy the fishing gear

For Shore Fishing

1. Fixed the removable float on the cable.
2. Cast the fishing sonar transducer into water as far as you can.
3. You can cast the fishing sonar transducer either by your hand or by the fishing rod.

HawkEye FishTrax Portable, Handheld & Boat Mount FIsh Finders

Choose From 3 different models:

FISHTRAX 1

The FishTrax 1 is for beginner anglers looking for affordability and ease of use. It has a VirtuView ICON LCD that depicts sonar data in a series of icons, which provides valuable fishing data in an easy-to-understand readout. The FishTrax 1 also includes 5-level adjustable sensitivity, an audible fish alarm and a backlit display for easy night time viewing.

- VirtuView ICON Display.

- 200 kHz FishTrax Intelligent Sonar (14° Beam Angle).

- Fish Depth Scale.

- Bottom Composition Indicators.

- Audible Fish Alarm.

- SKU: FT1P.

- FISHTRAX 1x.

The FishTrax 1x is for intermediate anglers looking for advanced features to pinpoint optimal fish habitats. It incorporates a VirtuView Dot Matrix LCD that can be adjusted to show raw sonar data, or the FishTarget programming can be turned on to pinpoint the exact depth of your prey. The FishTrax 1x also includes auto-switching, dual-beam FishTrax. Intelligent Sonar, as well as a 10-level sensitivity adjustment, multi-level depth ranges, and auto-zoom bottom tracking.

Integrated fish and depth alarms intensify prey targeting even further.

- VirtuView Dot Matrix Display.

- Auto Switching Dual-Frequency 200/83 kHz FishTrax Intelligent Sonar (14/26° Beam Angle).

- Auto and Manual Depth Range and Sensitivity Settings.

- FishID Fish Indicators with Fish Depth Targeting.

- Bottom Zoom Mode.

- Audible Fish & Depth Alarms.

- SKU: FT1PX.

- FISHTRAX 1c.

The FishTrax 1c is for experienced anglers who demand a high-definition fishing experience. It incorporates a full-color,

high-definition VirtuView TFTN display and has three operating modes: Fish Finder, Data, and Ice-Mode DigitalFlasher. The Fish Finder mode identifies the presence of fish, bottom cont our and composition, and the overall depth of the water on the HD color display. The Data Mode enlarges depth, temperature, and battery voltage readings so they are easy to read from several feet away. The Ice-Mode Digital Flasher gives you real time FishTrax sonar echoes like a traditional flasher, perfect for targeting suspended fish while ice fishing. The FishTrax 1c also incorporates user-

selectable, dual-beam FishTrax Intelligent Sonar which allows fine tuning of the fish finder to adapt to any fishing style or platform. It has a 100-level sensitivity adjustment, multi-level depth ranges, and auto-zoom bottom tracking.

Integrated fish and depth alarms intensify prey targeting.

- VirtuView HD Color Display.

- User Selectable Dual-Frequency 200/83 kHz FishTrax Intelligent Sonar (14/26° Beam Angle).

- Auto and Manual Depth Range and Sensitivity Settings.

- FishArc and FishID Fish Indicators with Fish Depth Targeting.

- HD Bottom Landscape Painting.

- Split Frequency & Bottom Zoom Mode.

- Ice-Mode Digital Flasher.

- Audible Fish &Depth Alarms.

- SKU: FT1PXC.

Dual Beam Sonar (200 & 83 kHz)

All FishTrax Models are equipped with FishTrax Intelligent Sonar that allows its user to tweak their fish finder so that it will adjust to any fishing technique or platform. With its 100-level affectability modification, multi-level depth ranges, and auto-zoom ground tracking, any angler can step up their prey targeting with satisfaction. It comes with 2 functional airwave frequencies (200 kHz and 83 kHz) so you can fine tune its sonar readings in shallow or deep water without complexity. FishTrax Intelligent Sonar allows you to fine tune the FishTrax to adapt to your fishing style. There are two operating frequencies (200 kHz and 83 kHz), each specifically designed to make finding fish effortlesss. A frequency of 200 kHz means that 200,000 sonar pulses are produced (and listened for) by the transducer every second, while 83 kHz represents 83,000 sonar pulses per second.

Fishtrax Expandability

The HawkEye FishTrax built-in expand-ability allows for the addition of accessories to adapt the fish finder to any fishing platform. Boat, Kayak, Canoe, Float Tube, Bank, Dock, Ice, etc. You choose the platform, and select the accessories to adapt your HawkEye FishTrax Fish Finder to your fishing needs. Powered by 4 AAA batteries the space and weight saving design is great for kayaks and float tube anglers alike. This unit comes with auto switching dual-beam FishTrax Intelligent Sonar that will read up to 240 feet in 1/10 precision.

FishTrax 1C Multi Mode

The FishTrax 1C is modeled for the skilled fisherman who wants the high-definition fishing capability. It includes a full-color, high-definition VirtuView TFTN display in addition to 3 functional modules: The Fish Finder, Data, and Ice-Mode Digital Flasher. This mode gives you a real time view of the FishTrax sonar echoes. The flasher shows what's happening below you right at that moment, whereas the fish finder mode shows you the sonar returns from the past (a historical image of what has happened). (FishTrax 1 and 1X do not include the flasher mode).