Product description

BOSS Audio Systems B65N High Level to RCA Converter Noise Filter for Car Audio Systems

• High Level to RCA Impedance Converter
• Featuring Input Sensitivity Adjustment
• Always Use High Quality RCA Cables for your Audio System
• Dimensions: 3. 4 x 1. 5 x 1. 5, Unit Weight: . 25 Lbs.
• 1 Year

User questions & answers

Question:	Can I insert this filter between my power amp and preamp in my home audio system to fix the hum problem
Answer:	I just took a square and a 45degree angle square and measured. it moves 15 degrees from center in all directions on mine.... Hope that helps.
Question:	will this work to convert headphone out on pc to RCA inputs on stereo receiver to play music off pc
Answer:	A set of drawings has been added to the product listing. The cut-out size for this product should be approximately 9 3/4" x 13 7/8". The speaker does have trim gives a clean appearance when cut to the cut-out dimensions and properly installed.
Question:	Will this work for a CB radio
Answer:	Hi, thank you for asking. The hole is only about 3/8” too big for the 82C., but should work if your measurement is right. Make sure to center the speaker in the hole as you tighten it in. The whole is about 3/8” too small for the 82ac speaker. If you expand the hole size with the template included, the 82ac will work fine.
Question:	can someone explane to me what this does as if i were a complete idiot
Answer:	I did, just make sure you use a stud finder before you drill or cut holes. If its a single story or the top floor get in the attic and make sure its between the ceiling joists. I put a hole that had a rafter in the way. Then I had to move the speaker and patch the sheetrock.

Product description

Description



GearIt 3.5mm Male to 2-Male RCA Adapter. This cable is ideal for connecting Smartphones, MP3 players & tablets to a stereo receiver, speaker or other RCA-enabled device. It supports mobile devices containing a standard 3.5mm auxiliary jack, which are commonly associated with headphones/ear buds. In fact, many of today audio components have this convenient input for easy hookups. Dual-shielding, polished metal molding & corrosion-resistant gold-plated connectors deliver crisp sounds & minimal signal loss. A compact, beveled step-down design gives a firmly secure connection, even when bulky cases are on your device. You can even charge your devices while in use (separate cable required). Product Features - Connects a Smartphone, MP3 player or tablet to a stereo receiver, speaker or other RCA-enabled device - 3.5mm male connector on one end, & 2 male RCA connectors on the other end - Dual-shielded with high-quality polished metal & gold-plated connectors - Beveled step-

• 3.5MM RCA SUBWOOFER CABLE - Use the GearIT 3.5mm to 2x RCA stereo audio cable to connect an iPhone/iPad, MP3 player, smartphone or laptop with the common 3.5mm aux audio port to a TV, AV receiver, amplifier, projector, radio or any other device with an RCA jack audio input (Red/White or the Left/Right RCA Port).
• METAL HOUSING AND BI-DIRECTIONAL CONNECTOR – This GearIT RCA subwoofer cable is equipped with premium metal housing to provide longer lasting durability versus other PVC connectors on the market. The RCA connectors have easy grips for plugging and unplugging while ensuring reliability. The Bi-Directional feature also seamlessly transmits stereo audio for high quality sound and is separated with common red and white male RCA plug colors.
• STEP DOWN CONNECTOR WITH 24K GOLD PLATED TERMINALS - This 3.5MM RCA stereo audio cable has the slim-line connector with beveled step down 3.5mm stereo audio cable allows the 3.5mm stereo jack to be easily plugged into your portable devices 3.5mm headphones audio jack without needing to take off the protective case on the phone or the tablet. The 24K gold contacts is for optimal signal transfer and corrosion resistance to provide you with best quality of sound.
• HIGHEST QUALITY MATERIAL AND TIER 1 MANUFACTURE PROCESS – Our product goes through many stages of testing to ensure it performs at the highest of standards. This cable is made of oxygen-free copper for supreme accuracy and sound quality and provides maximum conductivity and durability. The strain-relief rings near the connector makes the connector more stable and flexible. We use dual-shielding technology with high quality metal housing connectors to reduce signal loss for greater reliability.
• PRO SERIES LIFETIME GUARUNTEED – We stand behind the performance of all of our products and want to make sure each customer is satisfied with their purchase. If you are not happy with the product for any reason, we offer a simple return policy and exceptional customer service. All of our products are backed with our top rated lifetime warranty.

User questions & answers

Question:	My receiver has a 2 wire audio input system, instead of rca. could i cut off these parts, at the ends of cables, and use the exposed wire
Answer:	Very likely, though mine was in between the head unit and the amp in a vehicle. I don't see any reason it wouldn't. I would also check that speaker lines or RCAs are not run directly next to coax or power lines for the amp or receiver.
Question:	Is this cable suitable for subwoofer connection
Answer:	You don't need this. The headphone output is low enough to connect to a line input. Just use a 3.5mm Male to 2-Male RCA cable.
Question:	Can the two rca cables be split apart for long separate run.....say 25 ft
Answer:	sure, it filters out noise from the power wire
Question:	Will the sound go in either directon? just want to know if it can be connected to a pc and receive sound to the pc
Answer:	This product isolates the grounds of an aftermarket stereo from an aftermarket amplifier. This way, if there is an engine whine in the sound because of a difference in ground resistance, it cleans it up. It does not help with any issue except for background noise caused by ground problems.

Product description

Use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides one pair stereo rca output and a power wire for the remote amplifier turn on connection. Adjustable left and right gain output. Not compatible with factory amplified stereo systems. Only works with factory non-amplified systems (no JBL/Synthesis, Bose, etc.). Connection is done at back of radio. Compatible vehicles: No factory premium amp systems like JBL, etc/ No factory external amp systems 2020 4 Runner, 2019-2020 Avalon, 2018-2020 Camry, 2019-2020 C-HR, 2020 Corolla, 2020 Highlander, 2020 Prius, 2019-2020 Rav4, 2020 Sequoia, 2018-2020 Sienna, 2020 Tacoma, 2020 Tundra

• Use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides one pair stereo rca output and a power wire for the remote amplifier turn on connection. Adjustable left and right gain output.
• VERY IMPORTANT----PLEASE READ BEFORE PURCHASE---- Not compatible with factory amplified stereo systems like JBL, Bose, etc. Only works with factory non-amplified systems (no JBL/Synthesis, Bose, etc.). No factory external amp systems. Connection is done at back of radio.
• Compatible Vehicles: No factory premium amp systems like JBL, etc/ No factory external amp systems- 2020 4 Runner, 2019-2020 Avalon, 2018-2020 Camry, 2019-2020 C-HR, 2020 Corolla, 2020 Highlander, 2020 Prius, 2019-2020 Rav4, 2020 Sequoia, 2018-2020 Sienna, 2020 Tacoma, 2020 Tundra

User questions & answers

Question:	Okay can some one show me a picture when the connectors go on the rear of the head unit ?? I got the small in the right place but idk about the other
Answer:	Ok. its better not to mess with the minus and positive cable on the rca if you cut it. coz it will short circuit your speaker. why not try tis two product 1' 18 Gauge Speaker wire with RCA Female Pair (Black & Red) to Open Speaker Termination Leads Link: https://www.amazon.com/dp/B003U49UG8/ref=sspa_dk_detail_2?psc=1&pd_rd_i=B003U49UG8&pd_rd_wg=MRGa3&pd_rd_r=53HZC9T7YJ0C1SWCD2JG&pd_rd_w=XORHO Kicker KISLOC 2-Channel K-Series Speaker Cable to RCA Adapter with Line Out Converter Link: https://www.amazon.com/Kicker-KISLOC-2-Channel-Speaker-Converter/dp/B00I4EF1BC/ref=sr_1_3?ie=UTF8&qid=1510566973&sr=8-3&keywords=rca+cable+to+speaker+wire+converter
Question:	Will this fit a 2021 Tacoma trd off-road non jbl
Answer:	It really depends on the stereo setup you have. I don't believe this is the exact plug you need. Usually the output from a newer stereo whether it's pre amp or not is a RCA type plug and the input on the subwoofer the same. I've never heard of a 3.5mm headphone jack used in such a way but I could be wrong. (shrugs shoulders)
Question:	Will this work in 2021 tacoma trd sport
Answer:	The way it is made would make it near impossible to do so unless you don't mind bare live wires being exposed to anything that could cause a short.(including a hand) I'm not sure what your trying to accomplish but if I can take a quess you'd be better off looking for a short version of this 3.5mm jack splitter then add two (2) single RCA female adapters with a couple of single (separate) normal RCA cables in the length you need. Without knowing anything more all I can do is hope this helps.
Question:	will this work for a 2019 4runner
Answer:	Yes. It's copper wire, it doesn't care which way the electrons flow.Providing you setup your PC and what other device in the correct fashion.If you plug in the 3.5mm male into a port on the PC that will be an input port (maybe the microphone port).Plug in the RCAs to some sort of output source.

Product description

The Giveet J205 Bluetooth 5.0 Receiver offers a convenient and functional way to transform audio and hi-fi systems into wireless compatible ones.



Little Gadget with Great Multi-Functionality

◆ This little device can be connected to your wired headphones, speakers, home sound system, car stereo and other portable non-Bluetooth device by a 3.5mm or 2.5mm L/R audio cable.

◆ Enjoy your music freely from your phones, tablets and other Bluetooth devices.



Latest and Advanced Bluetooth V5.0 Receiver Powered by CSR

◆ Make sure the signal wireless transport stable

◆ Hi-Fi and pure music sound quality

◆ Lower power consumption



Extra-Long Battery Life

With 240 mAh battery and can continuously work over 16 hours or 400 hours standby time



Can work while charging, Keep Always on

While charging, the item will be reset and power off.So if you want to use it, please re-turn on it again while charging and the item will be automatically connected to your paired device.



Specifications:

Bluetooth Version: V5.0+EDR

Builti-in Li-on Rechargeable Battery: 240mAh

Function Range: up to 33 Feet / 10 Meters

Working Time: up to 16 hours

Stand-by Time: up to 400 hours

Charging Time: 2 hours

Dimensions: 5.0x 2.5 x 1.0cm, Weight: 14g



Package Includes:

1 x Bluetooth Audio Receiver

1 x Micro-USB Charging Cable

1 x 2.5mm R/L RCA Audio Cable

1 x User Manual



IMPORTANT:

1) The Bluetooth Adapter is not Bluetooth transmitter, not for TV/PC and can't pair and connect your Bluetooth Headphones/Speaker.

2) Please search Giveet Bluetooth Transmitter and they are on hot sales.

3) If need password, please enter 0000 (Four Zero).

• ➤Upgraded CSR Bluetooth V5.0 Chipset: Get Hi-Fi high quality audio sound in playing music and wide compatibility. Compatible with most Bluetooth enabled devices like smartphones, PC, Tablet, Laptop etc, ideal for home or vehicle stereo audio systems. Please note the Bluetooth Audio Receiver is not build in Mic and doesn't support hands-free calling.
• ➤ Easy to Use: Easy to set up and quickly connect to your Bluetooth device. Support automatically reconnect the paired devices quickly.
• ➤ Double Link: Connect two Bluetooth devices at once; freedom to enjoy music. Bluetooth range reaches up to 33 feet in open space without obstacles.
• ➤ Extra-Long Working Time: Built-in battery provides up to 16 hours’ play, 400 hours’ standby time, only takes 2 hours to fully charge it.And it can work even while charging.
• ➤ 100% Customer Satisfaction Guarantee: Love it Or Your Money Back without any reason within 30days, Full One Year Quality Warranty!

User questions & answers

Question:	Will this device stil send a phone call audio through the car, even though it is not hands free
Answer:	Be aware plugs fit tight, the small one is speakers. The large is power wires. Look under radio wireing diagram.
Question:	No longer able to pair to my phone. I have turned both the phone bluetooth and receiver on and off repeatedly. Why did it stop while playing
Answer:	You should be fine considering that it’s a carryover model & non JBL touch screen. Of course, double check everything. You should be fine though.
Question:	Will this work on my t.v in my cadillac?it has auxiliary already,but i want bluetooth
Answer:	Yes, it works perfect in my 2020 Tacoma TRD sport
Question:	does this need an adapter for wired headphones
Answer:	Probably not. I believe this is for 2020’s and as they have an upgraded 10 inch head unit. There is another one on Amazon for 2016-19 and it’s a bit cheaper. I almost made the mistake of ordering that one for my 2020 Tacoma.

Product features

Latest Bluetooth 5.0

Giveet J205 Bluetooth receiver upgraded Bluetooth 5.0 and adopted high-end CSR chip, offers enhanced sound transmission, faster pairing, more stable wireless connection and wider compatibility with Bluetooth enabled devices.

Bluetooth for Your Car Stereo System

Bluetooth receiver turns the Car Stereo System into a Bluetooth one, receiving and playing the music from the phone.

Upgrade your wired speaker Bluetooth-enabled

Turn your old speaker to wireless, from traditional wire connect to wireless Bluetooth connection, upgrade your audio devices. Enjoy your music freely from your phones, tablets and other Bluetooth devices.

Play While Charging

It will work while charging, therefore you can leave it always in charging status as well. If you charge it when working, J205 will turn off automatically, please turn it on again.

Dual Link Connectivity

Giveet J205 can connect 2 Bluetooth devices at the same time for enjoying music, easily switch between your phone or either one, sharing different music with your partners.

16 Hours Long Battery Life

With 240 mAh battery, Giveet Bluetooth receiver can be used for about 16 hours after a fully charge. The rest battery life is visible on the paired phone. It will power off automatically if unconnected over 5 minutes.

Product description

Use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides rca output and a power wire for the remote amplifier turn on connection. Adjustable gain output. Not compatible with factory amplified stereo systems. Only works with factory non-amplified systems (no JBL/Synthesis, Bose, etc.). Most if not all vehicles with NAV might have premium system which this adapter might not work with. Connection is done at back of radio. Compatible vehicles: Hyundai: 2018-2019 Accent, 2019-2020 Elantra, 2017-2018 Elantra (7 inch touchscreen vehicles only, No NAV), 2018 Elantra GT, 2018-2019 Ioniq, 2018-2019 Kona, 2017-2019 Santa Fe, 2017-2018 Santa Fe Sport (7 inch touchscreen vehicles only, No NAV), 2019 Santa Fe XL, 2017-2018 Sonata, 2018 Sonata Hybrid, 2019 Tucson, 2019 Veloster; Kia: 2017-2019 Cadenza, 2019 Forte, 2017-2018 Forte (7 inch touchscreen vehicles only, No NAV), 2017-2018 Niro, 2019 Optima, 2017-2018 Optima (7 inch touchscreen vehicles only, No NAV), 2018-2019 Rio, 2017-2018 Sedona, 2017-2019 Sorento (7 inch touchscreen vehicles only, No NAV), 2017-2019 Soul, 2020 Sportage (w/auto climate vehicles only), 2017-2019 Sportage (7 inch touchscreen vehicles only, No NAV), 2018 Stinger

• Use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides rca output and a power wire for the remote amplifier turn on connection. Adjustable gain output.
• Important: Not compatible with factory amplified stereo systems like JBL, Bose, etc. Most if not all vehicles with NAV might have premium system which this adapter might not work with. Only works with factory non-amplified systems (no JBL/Synthesis, Bose, etc.).
• Connection is done at back of radio.
• Compatible vehicles: Hyundai: 2018-2019 Accent, 2019-2020 Elantra, 2017-2018 Elantra (7 inch touchscreen vehicles only, No NAV), 2018 Elantra GT, 2018-2019 Ioniq, 2018-2019 Kona, 2017-2019 Santa Fe, 2017-2018 Santa Fe Sport (7 inch touchscreen vehicles only, No NAV), 2019 Santa Fe XL, 2017-2018 Sonata, 2018 Sonata Hybrid, 2019 Tucson, 2019 Veloster; Kia: 2017-2019 Cadenza, 2019 Forte, 2017-2018 Forte (7 inch touchscreen vehicles only, No NAV), 2017-2018 Niro, 2019 Optima,
• 2017-2018 Optima (7 inch touchscreen vehicles only, No NAV), 2018-2019 Rio, 2017-2018 Sedona, 2017-2019 Sorento (7 inch touchscreen vehicles only, No NAV), 2017-2019 Soul, 2020 Sportage (w/auto climate vehicles only), 2017-2019 Sportage (7 inch touchscreen vehicles only, No NAV), 2018 Stinger

User questions & answers

Question:	So i can plug and play this to my 2018 hyundai elantra factory radio? run my rca wires and on/off wire to my amp and then hook my subs to my amp? np
Answer:	Dear Valued customer, Many thanks for your inquiring.NO and the J205 CAN'T support Hands-Free and so don't send one phone calling auido through the car via Bluetooth.You can check our another item named BTI-030 and it is built in Mic and support phone calling and the ASIN CODE:B077GCQRJB.So please search it by the ASIN code on Amazon.So please happily shop and if any, please feel free to contact us anytime!Thanks again!
Question:	Hello friend, it works for elantra gt 2018 with stereo car play, the one that comes from the factory
Answer:	Dear Sir / Madam, Thank you for your question! Please try to clear the pairing record of J205 and smartphone, and then pair and connect again. The cleaning method is as follows: 1) Please turn off your paired Smart Phone Bluetooth Function. 2) Slide switch J205 to ON Mode. 3) Then Press and Hold on MFB button for about 5-10 seconds until the red LED light blinks for 3 times and it completes the clearing the pairing record of J205. If you have other questions, you can send a message to our customer service email: [email protected]
Question:	I understand how output from radio gets to the amp? How does output from amp get to the speakers? How would I use this for 4 speakers
Answer:	Hi Ryan, Greetings from Giveet! Thanks for your message! Sorry, this black model J205 is a Bluetooth receiver, can not transfer the audio from your TV. If you want to transfer your audio from your TV to your Bluetooth speaker or Bluetooth headphones, please search Giveet Bluetooth Transmitter BTI-038 ( ASIN: B07DSFFC2Z ) or BTI-018 ( B07198BBZN ) on amazon. If you have any doubts or requirement or meet any problem during using our products, please feel free to contact us to let us know, and we will try our best to help. Thank you very much and have a nice day!
Question:	This item does not include the line output converter correct? this item simply allows for seamless no splicing out of head unit then to loc
Answer:	Dear Valued customer, Yes and maybe you need extra one adapter, 3.5mm converter F/F for wired headphones.But you can check our another item, named BTI-030 Bluetooth Receiver for your wired headphone and don't need the adapter.Please check it on Amazon by the ASIN CODE:B077GCQRJB.So please happily shop and if any, please feel free to contact us anytime.Many thanks for your care again!

Product description

WHY CHOOSE MPOW WIRELESS MUSIC RECEIVER?

Do you want to retrofit an existing stereo system?

Do you want to make an old boom box wirelessly compatible?

Mpow wireless music receiver is just the ticket. The latest wireless streaming adapter has a 3.5mm port and RCA jacks to output audio as well as a 3.5mm-to-RCA cable so that you can run it in whichever direction you want depending on the audio source in use. The receiver can make wireless streaming to most speakers or home stereo systems. You can enjoy the convenience by its easy set-up, automatic reconnection, and multipoint connections.



Specifications:

Bluetooth Version: V5.0

Frequency Range: 2.4GHz

Bluetooth Mode:

HFP/HSP/A2DP/AVRCP

Bluetooth Range: ≤ 49 feet

Operating Voltage: DC + 5.0 V

External Interface: 3.5mm port, RCA jacks, USB port



What’s in the Box?

1x Mpow Wireless Music Receiver with Display Screen

1x RCA Audio Cable

1x 3.5mm Audio Cable

1x Micro USB Charging Cable

1x User Guide

• MODERNIZE BLUETOOTH RECEIVER: It comes with a unique screen design to clearly display functions of this receiver with different icons, including paired device 1/2, play/pause, light, battery, receiver name, and frequency spectrum
• BLUETOOTH 5.0 ADAPTER: Mpow Bluetooth 5.0 receiver can cover a wireless range of up to 49ft (15m) in a barrier-free room and hold strong connection within reasonable distance.
• 3D STEREO SOUND：The receiver features a premium chip to produce stereo sound for your music streaming sound system and reduce noise from your speakers, so that you can enjoy better audio quality.
• RCA/AUX-IN CONNECTIONS: RCA or AUX input connection is supported by the receiver, which is compatible to a variety of speakers. The receiver can not only be used at your home, but also in your car, so that you can freely enjoy wireless music no matter where you are.
• PAIRING WITH TWO DEVICES: Two Bluetooth-enabled devices can be connected to the receiver at once so you don’t have to keep switching them on and off. You can freely listen whatever you want within 10 hours.

User questions & answers

Question:	Does the charging cable have a normal size USB connection on one end, or are both ends micro usb
Answer:	It stays on till you choose to power it off. Even when hooked up to charge.
Question:	Looks like it has an on/off switch. Will this drop the Bluetooth connection to it as expected
Answer:	It will continue to work while charging. It charged super quick on top of that.
Question:	Will this always stay on when plugged in to power or do I need to walk over and turn it on every time I want to use it
Answer:	Dear friend, Thanks for your question. The connect wireless pro controller to switch steps is following: 1.Turn on your switch console, select the "Controllers" Menu 2.Select the "Change Grip/Order" Menu 3.Press the Reset Button of controller (the button near to the charging port) for more than 3 seconds and wait for few seconds 4.After the connection is successful, the LED lights indicate the corresponding game player This wireless nintendo switch controller works on all switch games that work with the official Pro controller and supports 4 people together. The functions are the same as the official Pro controller. If you have any question, please feel free to contact us. Sincerely, Customer Service
Question:	Does it continue to work while chargine or does it stop playing when charging like most BT devices
Answer:	Dear friend, Thanks for your question. The wireless switch controller built-in rechargeable battery provides 8-10 hours of continuous game play while only takes 2-3 hours to be fully charged. Powered via included type C USB cable, allows you to play while charging. If you have any question, please feel free to contact us. Sincerely, Customer Service

Product features

Wide Compatibility

The receiver is compatible to a variety of speakers via its 3.5mm or RCA ports, like TV or PC speakers, home stereo systems or AV receivers.

3D Stereo Sound

It is possible for you to indulge yourself in 3D stereo sound with vintage speakers. Press the 3D button on the receiver to have more life enjoyment.

Long Duration

Once the battery is fully charged, it can run for 10 hours or so. You can freely listen whatever you want within such long duration. It is suggested that the receiver is constantly charged while playing.

Multipoint Bluetooth

After wiring the receiver to an input, you can pair it with two Bluetooth enabled devices via the pairing button without keep switching them on and off but one source playing audio at a time.

Product description

This BOSS Single-DIN In-Dash Mechless (No CD/DVD) AM/FM Radio with Bluetooth, USB port, aux input, front and rear preamp outputs. The unit is compatible with audio output of iPhone/iPod, smartphones and MP3 players. The AM/FM tuner has switchable US/Europe frequencies while the amp pumps out 50 watts x 4 channels.

• Bluetooth - Answer/make calls and be hands-free with no distractions. The built-in microphone picks up your voice and your car speakers let you hear the person on the other side. Play and control your music and apps like Spotify/Pandora wirelessly
• Media Playback - Play music through your Bluetooth device or use the USB port. Digital media support includes MP3 and WMA file formats. Tune into the AM/FM radio stations for up to date music/news/sports and more
• Auxiliary - Compatible with the audio output from smartphones as well as MP3 players
• Inputs - The USB port gives you the option to have a vast library of audio files at your fingertips. The auxiliary input is a convenient way to hook up to your MP3 player/device
• Outputs - Use the front & rear pre-amp outputs to hook up your speakers (front left/front right and rear left/rear right)
• Power - You can get 50 watts x 4 Max power from the 611UAB to power your speakers. An amplifier is recommended to make sure your speakers are well powered
• Warranty - BOSS Audio Systems provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	Can I fit a 1997 dodge dokata
Answer:	The 611UAB may fit your vehicle. You will need a dash kit, and a wire harness to complete the installation. I would recommend taking your vehicle to a local car stereo shop to inquire about which specific parts will be needed.
Question:	Will this fit a 2000 Ford Mustang
Answer:	The 611UAB will fit your vehicle. You will need a vehicle specific dash kit and wire harness to complete the installation. I would recommend taking your vehicle to a local car audio shop to inquire about the installation of this stereo and any parts that may be needed.
Question:	Does the face come off
Answer:	I'm sorry but the face does not come off.
Question:	Does this come with all the wires I need for installation
Answer:	Hello. This stereo comes with the wiring harness for the aftermarket stereo. You will still need to purchase a vehicle specific wiring harness that will join the stereo harness to the vehicle harness coming from out of the dash.

Product features

Digital By Design

Pump out your own digital music library with the BOSS Audio 611UAB In-Dash Single-DIN Mech-less Digital Media Receiver. Drive to your favorite playlists by hooking your smartphone or MP3 player up with the Auxiliary input, plug into the USB port or listen to the AM/FM radio. Bluetooth technology lets you stream music and make calls hands-free. Choosing your sound style is a cinch with the built-in Preset EQ. You can also conveniently charge your USB powered devices through the USB ports

No CD Mechanism and Built-in Preset EQ

Our units without a CD mechanism are ideal for listening to digital media files from SD Cards, USB drives, and external devices such as smartphones through the auxiliary input.

The built-in Preset EQ allows you to choose from preset EQ curves for a variety of music styles such as Rock or Pop.

Bluetooth and Audio Streaming

Bluetooth enabled for wireless hands-free calling and speaker listening when paired with a smartphone.

Wirelessly stream audio via Bluetooth from compatible devices so you can listen to streaming music services such as Spotify and Pandora through your system.

USB Port

Supports USB flash drive files up to 32 GB for music playback on units without monitors and music, photo and video playback on units with monitors.

USB Charging

Charge USB connected devices through the built-in 1A charger.

Aux Input

The Aux Input allows you to connect to the audio output of an external device such as an MP3 Player or smartphone so you can enjoy your music through your system.

Pre-Amp Outputs

This unit's Pre-Amp outputs let you expand your system by adding up to 2 amps and/or signal processors.

ID3 TAG

ID3 Tag allows the audio file to store and display additional data such as title, artist, album, track number and more.

Switchable Tuner

The selectable tuner function allows you to adjust this receiver's tuner to receive radio broadcasts in either the US or Europe.

Product description

Pyramid Model : NS60

 High to Low Level Impedance Adaptor

• Converts High Level Speaker Output to RCA Line Level
• Adjustable Level Control
• Allows Easy Installation of EQ’s & Amplifiers
• Adds RCA Line Outputs to Systems without
• Hooks up to Domestic & Foreign Car Models

 

• CONVERTS TO RCA: The Pyramid High/Low Level Impedance Adaptor provides an easy solution to a car audio system that doesn't have the proper connections for an equalizer or amplifier. It converts high level speaker output to RCA line level
• UNIVERSAL FIT: Hooks up to any domestic and foreign car models. Adds RCA line outputs so you can hook up equipment like a powered amplifier to your vehicle sound system. Also works with home audio equipment's like for home theater setup applications
• ADJUSTABLE LEVEL CONTROL: The line output converter features adjustable level control providing a high quality with super low distortion end result
• EASY INSTALLATION: Features easy and hassle-free installation for convenience. Simply connect the stereo speaker wires to the line output converter inputs and use the RCA cables to run the signal from the LOC to your amplifier
• WORRY-FREE SHOPPING: With the Pyramid NS60 High/Low Level Impedance Adapter we are confident of the quality of our product, therefore, we offer a 30 day money back no questions asked

User questions & answers

Question:	Can use the output of this module to connect headphones? ofcourse i would use a rca to 3.5 female cable adapter
Answer:	Yes it will work, easy installment for the back of radio then everything falls in place!
Question:	Will i be able to hook this upto a mono connection? i want to hook this where a speaker goes so i can do a line out. thank you
Answer:	It worked in my 2018 hyundai elantra with the 7inch factory touch screen deck. No splicing wires needed
Question:	can you use this converter between 2 amps in order to increse the sound volume on rear suround speakers
Answer:	It totally depends on the speakers. You have to wire them up into a configuration that your amp supports. For example, I had a dual voice coil 12 inch sub, so I had to wire the coils in series then the ends in parallel to achieve 1 ohm. The lower the resistance, the more power your speakers will receive, but you need to make sure your amp supports 1 ohm, as many only support 2 ohms. Look online for wiring configurations, then measure the resistance across the positive and negative terminals before you plug the speaker wires into your amp.
Question:	will it work to have speakers and the line level convertor hooked up to the same channel outputs on car stereo
Answer:	Correct. No splicing... however. The front right speaker on mine now doesnt work. I dont know why. The reviews had at least one other person who had a similar problem.

Product description

Enjoy movies, music or talk radio when you hit the road with the Boss Audio BVB9358RC Double-DIN DVD Player with a 6.2-inch Touchscreen Monitor. Pop in a DVD/CD, connect your Smartphone or MP3 Player to the Auxiliary Input, turn on the AM/FM radio or plug into the USB and SD ports for more music options. You can also charge USB devices with the USB port. Bluetooth technology lets you play and control music apps like Pandora and Spotify and make calls hands-free. Choose your sound style with the built-in Preset EQ. Control it all with the Wireless Remote, your existing Steering Wheel Controls (interface sold separately) or the Touchscreen. Back up safely with the easy to install License Plate Mount Rear Camera. Enjoy more entertainment choices with the Boss Audio BVB9358RC.



For further product details, please scroll down.

• Bluetooth answer/ make calls and be hands-free with no distractions The built-in microphone picks up your voice and your car speakers let you hear the person on the other side Play and control your music and apps like Spotify/ Pandora wirelessly
• Media playback watch your choice of videos through the DVD player Play music through your Bluetooth device Pop in a CD or use the USB/SD ports for more audio alternatives Tune into the AM/FM radio stations for up to date music/news/sports and more
• Auxiliary input compatible with the audio output from smartphones as well as MP3 players
• Inputs USB/SD ports Aux input Back up safely with the included rearview camera The steering wheel interface allows you to use the existing functions on your steering wheel (interface module sold separately We recommend the Metra ASWC-1)
• Outputs use the front rear & Subwoofer pre-amp outputs to hook up your speakers (front left/front right and rear Left/rear Right) and subwoofer The video output allows you to connect an extra screen for more viewing capability
• Power you can get 80 watts x 4 Max power from the BVB9358RC to power your speakers An amplifier is recommended to make sure your speakers are well powered
• Equalizer customize how you want to hear your music with the balance/ fader/ bass and treble and control It all with the wireless remote control from either inside or outside of your vehicle

User questions & answers

Question:	Does this unit fit and is it compatible on a 2003 chevrolet trailblazer that currently has a stock bose audio 6 cd head unit and onstar
Answer:	u would have to buy a after market dash plate where the radio fits
Question:	Will this fit in a 2001 Mazda Tribute LX
Answer:	You have Ipod input on the front via Aux or you can also pair it with Bluetooth
Question:	Does this come with a dash kit? if not, what do i need to install this on a 2014 nissan versa
Answer:	Yes this Radio Has Key 1 and Key 2 Steering wheel code learning wires that allow it to work with existing steering wheel controls
Question:	Would this radio fit in a Chrysler
Answer:	This unit has a dedicated RCA subwoofer pre-amp as well and stereo RCA line level outputs

Product features

Bluetooth Hands-free

Bluetooth enabled for wireless hands-free calling and speaker listening when paired with a smartphone.

Bluetooth Audio Streaming

Wirelessly stream audio via Bluetooth so you can listen to streaming music services such as Spotify and Pandora and control the track & volume up/down and play/pause through your system.

USB Port

Supports USB flash drive files up to 32 GB for music playback on units without monitors and music, photo and video playback on units with monitors.

USB Charging

Charge USB connected devices through the built-in 1A charger.

Aux Input

The Aux Input allows you to connect to the audio output of an external device such as an MP3 Player or Smartphone so you can enjoy your music through your system.

SD Memory Card Port

Supports SD memory cards up to 32 GB for music playback on units without monitors and music, photo and video playback on units with monitors.

Video Output

Conveniently connect an external monitor's RCA inputs directly to this unit. A video signal amplifier is recommended when connecting to multiple video monitors.

Steering Wheel Controls

Control this unit using the vehicle's existing steering wheel control buttons. An additional interface (sold separately) is required. We recommend the Metra ASWC.

Product description

Use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides one pair stereo rca output and a power wire for the remote amplifier turn on connection. Adjustable left and right gain output. Not compatible with factory amplified stereo systems. Only works with factory non-amplified systems (no JBL/Synthesis, Bose, etc.). Connection is done at back of radio. Adapter made for Scion: 2013 - 2016 FR-S, 2012 - 2015 iQ, 2005 - 2016 tC, 2004 - 2006 xA, 2004 - 2015 xB, 2008 - 2014 xD; Adapter made for Toyota: 1988 - 2017 4-Runner, 1987 - 2017 Camry, 1999 - 2009 Camry Solara, 1986 - 2006 Celica, 1987 - 2019 Corolla, 1987 - 1992 Cressida, 2000 - 2006 Echo, 2007 - 2014 FJ Cruiser, 2001 - 2016 Highlander, 1987 - 2002 Land Cruiser, 2005 - 2010 Matrix, 1987 - 1995 MR2, 2000 - 2006 MR2 Spyder, 1992 - 1997 Paseo, 1987 - 1995 Pickup, 1991 - 1997 Previa, 2001 - 2018 Prius, 1996 - 2016 RAV4, 2001 - 2016 Sequoia, 1998 - 2016 Sienna, 1986 - 1998 Supra, 1993 - 1998 T-100, 1995 - 2016 Tacoma, 1987 - 1998 Tercel, 2000 - 2018 Tundra, 1987 - 1990 Van, 2009 - 2015 Venza, 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Yaris

• Use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides one pair stereo rca output and a power wire for the remote amplifier turn on connection. Adjustable left and right gain output.
• VERY IMPORTANT----PLEASE READ BEFORE PURCHASE---- Not compatible with factory amplified stereo systems like JBL, Bose, etc. Only works with factory non-amplified systems (no JBL/Synthesis, Bose, etc.). Connection is done at back of radio.
• Adapter made for Scion: 2013 - 2016 FR-S, 2012 - 2015 iQ, 2005 - 2016 tC, 2004 - 2006 xA, 2004 - 2015 xB, 2008 - 2014 xD;
• Adapter made for Toyota: 1988 - 2017 4-Runner, 1987 - 2017 Camry, 1999 - 2009 Camry Solara, 1986 - 2006 Celica, 1987 - 2019 Corolla, 1987 - 1992 Cressida, 2000 - 2006 Echo, 2007 - 2014 FJ Cruiser, 2001 - 2016 Highlander, 1987 - 2002 Land Cruiser, 2005 - 2010 Matrix, 1987 - 1995 MR2, 2000 - 2006 MR2 Spyder, 1992 - 1997 Paseo, 1987 - 1995 Pickup, 1991 - 1997 Previa, 2001 - 2018 Prius, 1996 - 2016 RAV4, 2001 - 2016 Sequoia, 1998 - 2016 Sienna, 1986 - 1998 Supra, 1993 - 1998 T-100,
• 1995 - 2016 Tacoma, 1987 - 1998 Tercel, 2000 - 2018 Tundra, 1987 - 1990 Van, 2009 - 2015 Venza, 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Yaris

User questions & answers

Question:	Will this fit 2018 toyota tacoma sr crew cab 2.7 L
Answer:	Hi, unfortunately no. The output of the unit is designed for receivers. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box NS60 for more details. Thank you.
Question:	Which harness fit 2010 Toyota Corolla factory stereo
Answer:	Yes. Just use one of the 2 channels. Left (black) for example.
Question:	Will this fit a 2016 Scion tC
Answer:	Are you using this in a car? I would say you could use it for two amps but i dont think it would increase the speaker volume. I used this to add an aftermarket subwoofer to my car using the stock stereo and it worked fine for that
Question:	Will this work on 2018 Subaru wrx
Answer:	Probably not. The speakers will consume so much of the power output that the "line level" will not have enough drive for the auxiliary amp.

• STREAM WIRELESSLY Add bluetooth compatibility to devices that don't have bluetooth by connecting the Roverbeats Unify Bluetooth Audio Receiver to your high-quality speakers headphones home/car stereo sound systems or any devices with A/V RCA and 3 5mm AUX/jack input
• NFC CAPABILITY Amplify the audio of your NFC-capable smart devices with a simple hand gesture by touching your smartphone or tablet to the bluetooth adapter and connect
• RAPID RECHARGE Recharge time of two hours On a full charge you can enjoy up to ten hours of operation
• COMPACT DESIGH Made to be mini and lightweight that you can easily tuck it away and travel with it
• NOTE Extend your bluetooth wireless range up to 33 feet Do not use adapters above 5V to charge the receiver

User questions & answers

Question:	While playing from a phone, can a different phone connect by clicking the bluetooth pair button on the phone
Answer:	It cannot. I just bought one of these and it's not well designed for use by multiple people. If a phone is paired with the device, there is no way to unpair it while standing at the device. You can only unpair from the phone. Even turning the device off and back on again won't help, because it will just automatically re-pair with the last phone it was connected to. If someone else's phone was previously paired with the device, and they happen to be in the other room, you will have to go ask them in person to unpair before you'll be able to pair.
Question:	what comes in the box
Answer:	In addition to the Bluetooth receiver, to comes with a USB power cord, a 110V plug with a receiver for the aforementioned USP power cord, and then two different cords to for plugging the receiver into speakers or stereo system. One is a headphone type plug for a computer, small portable speakers or an AUX jack in a car or possibly stereo receiver. The other cord splits into red and white plugs so you can attach the device to an stereo receiver or similar component sound system.
Question:	does this have to be turned on every time time i plug it in or does it automatically turn on when there is power. I'm thinking or using it my car
Answer:	you'll have to turn it on. Also it turns off automatically if you don't use it for a while.
Question:	can I use it while charging
Answer:	So, to sum up previous answers: The unit operates directly from the battery. So, the battery will not operate the unit if the battery is dead. When the unit is plugged in to charge the battery, the battery will operate the unit as soon as it has adequate charge, and as long as it has adequate charge, and will continue to operate the unit so long as the battery has adequate charge, regardless of whether the unit is plugged in or not.

Product features

Etekcity Bluetooth Receiver

The Roverbeats Unify features A2DP and AVRC profile functionality to stream high quality audio from a media source, designed to provide a standard interface to control TVs, stereo audio equipment and A/V devices.

The Unify has a 200mAh battery, providing up to 10 hours of continuous quality music playback for car systems, home theaters, smart phones and tablets with a 2-hour recharge time. It connects with any NFC-enabled device in the matter of seconds.

Product description

Amazing Golvery Ground Loop Noise Isolator for Car Audio / Home Stereo System



Eliminating Humming / Buzzing Noise:

If you've got your radio, iPod, MP3 player, Bluetooth receiver or similar audio equipment plugged into your car stereo or Home stereo system with an audio cable and you're getting audio hum noise caused by ground loops, you need this isolator work together so that you can enjoy MOST high quality sound.



Working Principle:

This ground loop isolator solves the problem caused by providing ground path isolation between components while maintaining full frequency response.

This litter adapter is no need for power, just plug and play, connect it with 3.5mm audio cable.



Compact and Portable:

Being so mini and light-weight, this little gadget does not take much space and can be easily taken away.



Specification:

- Works with any portable device that has 3.5mm/RCA audio jacks

- Eliminating Buzzing Noise : Let your car speakers / home stereo systems humming sound go,enjoy Most Clean music.

- Easy to Use, Just plug and play,no battery needed

- Eliminating Buzzing Noise

- Weight: 22g

- Size: 6.0*2.0*2.0 cm



Package Included:

1 x Golvery Ground Loop Noise Isolator

1 x 3.5mm Audio Cable(18cm)

1 x Quick Quide



Note:

The adapter has two 3.5mm audio output jack, you could use whatever side in the connecting process, no direction restriction.

• Eliminating Humming Noise: The Ground Loop Isolator can be used to achieve a clear speech/music by eliminating the humming noise in some car speakers / home stereo systems.Help you enjoy the clean and clear sound.
• Pure Sound Quality: No damage with Rock Music,Give you better experience,Can be used on Mono.
• Wide Compatible: Works with any portable device that has 3.5mm / RCA audio jacks, for your Car Audio System/Home Stereo, when grounding issues persist. Also used with a Bluetooth Receiver/Bluetooth Hands-free Car Kit in your Car Audio System/Home Stereo.
• Easy to Use: Just plug and play,no battery needed; Compact and portable, this little gadget does not take much space and can be easily taken away.
• Package Contents: Golvery Ground Loop Isolator, 3.5mm Audio Cable, RCA audio CABLE, User Manual.

User questions & answers

Question:	Will this help with a hissing and electric sounds being output from my audio mixer through a stereo RCA cable to 3.5mm adapter for my speakers
Answer:	Well did it? I'm a 2016 tc owner wondering..
Question:	i need this for my bedside radio, but the only hole i have to plug in is for my earphone. is there any other way i can make this product useful
Answer:	I would say no since it is made for a Toyota Tacoma.

Product description

Rock your vehicle with digital music with the SECOND GENERATION BOSS Audio 616UAB In-Dash Mech-Less (No CD/DVD) Digital Media Receiver. Turn on the AM/FM radio, hook your Smartphone or MP3 Player up with the Auxiliary Input or plug into the USB port for more options. Adjust the sound style with the Preset built-in EQ. Bluetooth technology lets you play and control music apps like Pandora and Spotify and make calls hands-free. Control it all with the wireless remote. Take a drive with the 616UAB and enjoy a digital music experience.

• Next Generation 616UAB - Now includes Dimmable Illumination for Buttons and LCD Display, Updated Dancing LED lights, and Added Mute Function
• Bluetooth - Answer/make calls and be hands-free with no distractions. The built-in microphone picks up your voice and your car speakers let you hear the person on the other side. Play and control your music and apps like Spotify/Pandora wirelessly
• Media Playback - Play music through your Bluetooth device or use the USB port. Digital media support include MP3 and WMA file formats. Tune into the AM/FM radio stations for up to date music, news, sports and more
• Auxiliary - Compatible with the audio output from smartphones as well as MP3 players
• Inputs - The USB port gives you the option to have a vast library of audio files at your fingertips. The auxiliary input is a convenient way to hook up to your MP3 player. Advanced Bluetooth supported profiles include A2DP, AVRCP and HFP
• Outputs - Use the front & rear pre-amp outputs to hook up your speakers (Front Left/Front Right and Rear Left/Rear Right)
• Power - You can get 50 watts x 4 Max power from the 616UAB to power your speakers. An amplifier is recommended to make sure your speakers are well powered

User questions & answers

Question:	Is it compatable with 2002 dodge
Answer:	Yes but the Bluetooth wont work
Question:	Is it compatible with a 2001 Ford F-250 super duty? Bluetooth as well
Answer:	The Unit may fit your car/truck. However, you may need three aftermarket accessories to complete your installation: · Dash kit · Wire harness (Connects car wiring to stereo wiring) · Antenna adapter You will want to use MetraOnline's vehicle fitment guide to find the part numbers you will need. Metra has all these products for sale on Amazon.
Question:	Does this have a wire for amplifier turn on
Answer:	Hello, Yes, the 616UAB features an amplifier/antenna turn on wire. Thank you!
Question:	What are measurements of this
Answer:	Hello, The measurements of the 616UAB are 5.375-inch depth, 7.125-inch width, and a height of 2.125 inches.

Product features

Keeping It Digital

Take your digital tunes on the road with the Boss Audio 616UAB In-Dash Mech-Less (No CD/DVD) Digital Media Receiver.

Tune into your favorite AM/FM radio stations, hook your Smartphone or MP3 Player up with the Auxiliary Input or plug into the USB port for more options.

Change up the sound style with the Preset built-in EQ. Bluetooth technology lets you play and control music apps and make calls hands-free. Control it all with the wireless remote. Make every journey better with digital music.

No CD Mechanism

Our units without a CD mechanism are ideal for listening to digital media files from SD Cards, USB drives, and external devices such as smartphones through the auxiliary input.

Built-in Preset EQ

The built-in Preset EQ allows you to choose from preset EQ curves for a variety of music styles such as Rock or Pop.

Bluetooth Hands-free

Bluetooth enabled for wireless hands-free calling and speaker listening when paired with a smartphone.

Bluetooth Stream and Control

Wirelessly stream audio via Bluetooth so you can listen to streaming music services such as Spotify and Pandora and control the track & volume up/down and play/pause through your system.

USB Port

Supports USB flash drive files up to 32 GB for music playback on units without monitors and music.

Aux Input

The Aux Input allows you to connect to the audio output of an external device such as an MP3 Player or Smartphone so you can enjoy your music through your system.

Pre-Amp Outputs

This unit's Pre-Amp outputs let you expand your system by adding one amp or signal processor.

ID3 Tag

ID3 Tag allows the audio file to store and display additional data such as title, artist, album, track number and more.

• FAST & RESPONSIVE – The latest Android 10.0, upgraded from Android 9.0 Pie, the Quad Core CPU with 2GB RAM & 16GB ROM offer you a faster and smoother experience. Snappy and responsive, just like on an IOS device.
• BLUETOOTH WIRELESS TECHNOLOGY – Your New Android car stereo receiver will easily pair with the vast majority of Bluetooth devices allowing you to make and receive all your calls Hands Free.
• MUSIC STREAMING – Enables you to play music from apps such as Pandora, iHeartRadio, and spotify from your Apple, Android & Media devices including any music stored by simply connecting wirelessly to your car stereo.
• 10.1-inch BACKLIT DIGITAL MULTI-TOUCH DISPLAY – Your high resolution 10.1” touchscreen allows easy visibility, displays all relevant music information and keeps all your favorite options within the reach of finger.
• 1 YEAR WARRANTY – XTRONS backs this unit with a 1-year warranty and provides professional technical support.

Product features

10.1 Inch IPS Panel, Clear at Any Angle

• Thanks to its IPS (In-Plane Switching) technology, this car stereo makes it possible to enjoy viewing on a Big Screen stereo without eye fatigue or discomfort from any angel.
• Catch every single crisp, clear and vibrant picture from expansive 178° viewing angle.

Enjoy the Ultimate Audio Experience with Built-in DSP

• 30-band Graphic Equalizer and 5 Present EQ Mode - Tailor the Sound to match your favorite music.
• Smart Bass – Make the Bass Effect Stronger.
• Balance & Delay – Ensure the sound you’re hearing arrives at your ears at the exact same time from each speaker.
• Loudness & Bass Filter – Deliver an Accurate Sound.

XTRONS Driver-Friendly Intuitive User Interface

• A good Driver-Friendly interface must be extremely intuitive.
• Like UI on this head unit, it has large icons for you to easily control the main functions, volume and multimedia to minimize distraction, so you can stay focused on the road.

Sharing Entertainment on Back Seat Monitors

• With the RCA output function, you can share all features simultaneously with your friends at the back seat.
• Thanks to the dual-zone function, videos(and other files) in USB could be played at backstage and transmitted to the back seat monitors for your kids watching while the head unit is navigating. No more distractions.

Screen Mirroring Function

Mirror your phone’s screen on this head unit. Simply connect your Android smartphonr or iPhone to this stereo, you'll be able to access your phone’s navigation, music, and other apps while driving.

GPS Navigation

Built-in GPS Receiver Module with External GPS Antenna. Supports Google Maps, Sygic, Waze and any other navigation software that is compatible with Android OS.

Hands-free Calls and Audio Streaming

A discrete Bluetooth module has been adopted for this head unit, which ensuures the full compatibility with the latest phones with Bluetooth 5.0.

Steering Wheel Control (CANbus Box Included)

With the steering wheel control button, you can switch songs, change channels and adjust colume at your fingertip, keep your eyes on the road.

Android OS | IPS | Built-in DSP | CarAutoPlay | 2.5D Large Screen | TPMS | OBD | WiFi | Full RCA Output

Features:

- 10.1” fully immersive big screen with 1024*600 high definition

- 2.5D curved glass panel and G+G capacitive touch screen

- IPS Panel, 178° Viewing Angle without eye fatigue or discomfort

- Supports playing 1080P format video

- Built-in DSP for a new level audio experience

- Full RCA Output & Dual Zone Function

- Built-in Steering Wheel Control

- Air Conditioning Information Display

Accessories:

1 × ISO Wiring Harness | 1 × Camera Cable | 1 × RCA Cable | 2 × USB Cables | 1 × Dual Zone AC Cable

1 × Single Zone AC Cable | 1 × CANbus Box | 1 × GPS Antenna | 1 × Gift Box | 1 × User Manual