8 best woofer for car

• SOLD INDIVIDUALLY | GREAT SOUND BUILT FOR COMPETITION: Large Double Stacked 180oz High Energy Magnets, Die Cast Basket with Black Textured Finish, Kevlar Fiber Enhanced Non-Pressed Paper Cone with Textured Paint Finish and EROM Foam Surround with Red Stitching. The KILOX Series Subwoofers are the perfect choice for audio enthusiasts that demand high performance at low frequencies with only moderate power consumption.
• HIGH PERFORMANCE SUBWOOFERS: Dual 2 Ohm Impedance, Enhanced Cooling T-yoke Design with Black Anodized Finish, Kevlar Fiber Enhanced Non-Pressed Paper Cone with Textured Paint Finish, EROM Foam Surround with Red Stitching, Fiberglass Woven Dust Cap and 10 Gauge Power Cable with Direct Lead Connection.
• AMAZING DEEP BASS FOR ITS SIZE: the KILOX 12 Inch Subwoofer Car Audio Speaker will massively improve the sound quality of your car audio system. This 12" Subwoofer features 1000 Watts RMS Dual 2 Ohm to 2000 Watts MAX, 3 Inch 4-Layer Hi-Temp Voice Coils. It's truly a Great Car Audio Sub at an affordable price!
• CRANK UP THE VOLUME: Are you looking to upgrade your Factory Subwoofer? With our Enhanced Cooling T-yoke Design with Black Anodized Finish, 3.0" 4-Layer Hi-Temp Voice Coil, Double Stacked 180oz High Energy Magnets, Double Black Poly Cotton Spiders with Mirror Image Layout, Customized Rubber Gasket and Magnet Boot, it's guaranteed to impress.
• MASSIVE AUDIO QUALITY GUARANTEED: Since 1999, Massive Audio has been an industry leader in high performance audio products. Massive Audio laid its roots in high quality audio reproduction through in-house engineering and a dedication to customers. Buy today, risk-free!

User questions & answers

Question:	will a Rockford fosgate2500 be a good amplifier for a pair of kiloxx122 or
Answer:	I assume you mean the T2500-1bdCP but if not let us know what amp you have. Those are 2500 Watts RMS at 1 ohm so you would want 2 of the KILO Dual 4 ohm (2000 Watts RMS @ 1ohm) and yes that would power them with some head room.

Product features

KILOX SERIES SUBWOOFER

The KiloX122 is Dual 2 Ohm, 1000 Watts RMS 2000 Watts MAX and uses Black Anodized 3" 4-Layer Hi-Temp VC, 180oz Double Stacked Magnet, Kevlar Fiber Enhanced Non-Pressed Paper Cone with Textured Paint Finish. *Sold as each

Wattage

The MAX wattage is 2000 Watts for Burping and 1000 Watts RMS for Daily Driver.

Kevlar Fiber

Kevlar allows for a light weight yet durable cone which leads to higher SPL, sensitivity and more accurate tone.

Ohm

Dual 2 Ohm impedance lets you wire each subwoofer to a 2 or 8 ohm load / or for a Pair 1 ohm or 4 ohm final loads.

Great Sound Quality

Great Sound Quality: High quality materials and construction lead to amazing sound pressure levels with clear tonality.

Product description

Excellent Repacement Woofer For Sound & Music Reinforcement SystemsCloth Edge Suspension 25 oz. Magnet 1.5-Inch Kapton Bobbin Voice Coil 8 Ohms Impedance Mounting Depth: 4-Inch 150 Watts RMS/300 Watts Peak Power

• 300 WATT POWER: This high powered audio projection subwoofer system has a maximum power output of 300-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style
• CLOTH EDGE SUSPENSION: The high-performance car woofer speaker has a cloth edge suspension that completes your woofer enclosure system. Features 4.50” mounting depth for easy installation
• 1.5” KAPTON VOICE COIL: This car speaker has a 1.5” Kapton bobbin voice coil and 8 ohms impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp and clear sound
• 10 INCH PAPER CONE: Pyramid follows the standard size for most car stereo systems & created this 10" high powered paper cone driver perfect for new speaker construction, replacing worn or blown speakers in your favorite loudspeaker cabinet
• 25 OZ MAGNET STRUCTURE: The subwoofer speaker has a 25 oz magnet structure. The heavy-duty housing provides a strong foundation. Also super easy to install to your vehicle's sound system. Provides excellent replacement woofer for sound & music systems

User questions & answers

Question:	so you keep mentioning car sound...Is this 8 ohm or 4 ohm
Answer:	Dimensions: 14.17” diameter x 5.7” height. These are the dimensions of the subwoofer, check the measurements of your car.
Question:	What is the size of the mounting hole? Aka what size hole in a box will it fit into
Answer:	With a RCA splitter
Question:	Is this speaker only for car audio
Answer:	Amp install kit is really all you need
Question:	Hi,my logitech Z5500 subwoofer has blown.Would this one be a perfect replacement? Thanks
Answer:	Hello, Please contact the Planet Audio Technical Support Team at 1-805-751-4854 to inquire about replacement parts. Planet Audio Support Team.

Product description

If you are limited in space or just looking to add some bass to your system, this kit is for you. The Kenwood KSC-SW11 is a compact low profile powered subwoofer system that can be added under car seat, in tight spaces or just in your trunk. This subwoofer is powered, so no need for an external amplifier, it also comes with remote bass control and power and ground wire harness. It's made by Kenwood, so you are getting quality made subwoofer that will last you years! This 150 Watt subwoofer is the perfect system for you if you are looking for that all in one system that is incredibly easy to install. Just wire the subwoofer to your battery, ground it, connect it to your head unit using RCA cables (Wiring Kit not included).

• Aluminum enclosure with 8-1/4" x 5-1/8" Sub
• •Compact powered subwoofer•
• •wired remote for control over: volume level, variable low-pass crossover(50-12)
• sub•built-in amplifier: 75 watts RMS power (150 watts maximum)

User questions & answers

Question:	I have a 2015 VW Jetta SE (stock speakers and stock touchscreen head unit). Can this be installed in my car without needing anything else
Answer:	If you're just looking to boos the bass output, it think it would be a nice compliment--you'll definitely notice the difference. I upgraded my speakers in my 14 Passat at the same time, and there is a much bigger improvement, though. You'd be surprised how much even just $150 spent on 2 pair of speakers makes a huge difference!! The stock ones are just not all that.
Question:	I have a factory deck and a 4 channel amp powering my four car speakers. Would I need anything extra to install this sub? RCA cable, fuse, etc
Answer:	If you want to run RCA cables from the back of your radio to the amp without chopping up wires you need to buy a RCA cable with male ends on both sides.
Question:	Did i read correctly: this does not have to connect to the battery
Answer:	Yes,you don't need to connect it direct to the battery, you can connect it directly from any constance(Yellow) 12Volt power. I tap mine together with my radio head unit and it's running fine. But you can definitely connect directly to the battery if you wanted to. The power it consume is not much for it to connect directly to the battery. But please do not cut away the 10amp fuse if you decide to tap it with your head unit or some other fuses, it's for the safety of your car. The only wire that you don't need to connect directly is the ACC 12Volt(Red) supply for the power control that comes in Blue/White(P.Control).
Question:	Would I be able to install this into my 2014 Subaru Impreza? And if so would I need to buy anything else, or would this have everything that I need
Answer:	I just installed this in my daughters 2001 Forester and it fit under the drivers seat no problems. However, the heating ducts will be blocked by sub unit. Since Subaru offers an OEM under the seat woofer, there is a duct kit to divert the heat around the woofer Part number H630SAJ040, I'm pretty sure it will work on my 2001 Forester (I don't have it in hand yet) but I don't know if it will work with you 2014 Impreza or not. I'd have to see the ducting under your seat.

Product features

Kenwood KSC-SW11 Compact Powered Enclosed Subwoofer

Features:

• 150W peak power Powered subwoofer
• Aluminum Die-cast frame
• Noise-less sound
• Wired remote (Level/Freq./phase control)
• Line(RCA) + speaker level input

• 12-INCH LOADED SUBWOOFER: Kicker 12 Inch 1000 watt 2 Ohm ported vented loaded subwoofer enclosure box is the easiest way to get legendary bass in you ride
• 1000 WATT POWER: 1000 Watts MAX 500 Watts RMS power handling per pair
• 90.8 dB SENSITIVITY: Features 2 ohm impedance with high temperature voice coils and 90.8 dB of sensitivity
• SANTOPRENE SURROUND: CompR’s signature red double stitching makes an outstanding bond between the ribbed Santoprene surround and polypropylene woofer cone
• SPECIFICATIONS: Stamped steel basket; Double stacked magnet; Spring loaded push terminals; Dimensions: 18.38 x 16 x 11.25 inches / 14.44 inches (W x H x Top Depth / Bottom Depth); Weight: 49 pounds; Manufacturer warranty: 1-year warranty

User questions & answers

Question:	Single or dual voice coil
Answer:	Yes. It actually comes with 6 real golf balls.
Question:	Hi , What is the best amp I can buy for low price that will work that best with this amp
Answer:	It comes with 2 wraps, one for each leg.
Question:	Can i run this on a 2 channel amp bridged says 4 ohms. Its a pioneer 1000 watt 2 channel
Answer:	width is 8cm, about 3.15''
Question:	Will a mtx thunder500.1 work well with this sub
Answer:	Hi thank you for your question regarding our weight lifting knee wraps. Our knee wraps come as a pair. one for left knee and one for right knee.

Product description

White Injected Polypropylene ConeSpecially Treated Black Rubber Edge Suspension Vented Motor Structure 1.0-Inch High Temperature Kaptoon Voice Coil Heavy Duty Magnet Structure Bumped Yoke Plate for Extended Excursion Impedance: 4 Ohm 150 Watts RMS/300 Watts Peak Overall Diameter: 6.57-Inch SPL @ 1W/1M: 87.1 DB 40 Oz. Magnet Structure Mounting Depth: 2.76-Inch

• 300 WATT POWER: This high powered audio projection woofer system has a maximum power output of 300-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style
• BUMPED YOKE PLATE: This high-performance car woofer features a bumped yoke plate for an extended excursion. Also features vented motor structure and a specially treated black rubber edge suspension which also help give a more solid sound
• 1” KAPTON VOICE COIL: This car speaker has 1” high-temperature Kapton voice coil, 87.1 dB SPL & 4-ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound
• 6.5" POLYPROPYLENE CONE: Pyramid follows the standard size for most car stereo systems & created this 6.5" white injected polypropylene cone perfect for new speaker construction, replacing worn or blown speaker in your favorite loudspeaker cabinet
• 40 OZ MAGNET STRUCTURE: This woofer speaker has a 40 oz heavy duty magnet structure. The heavy-duty housing and structure provides a strong foundation, and it is also super easy to install to your vehicle's sound system w/ 2.76” mounting depth

User questions & answers

Question:	Do these fit in a 2006 Jeep Liberty
Answer:	I would throw it away and get a new one.
Question:	What do I have to do to make this fit in my 2001 jeep TJ
Answer:	I don't know if they offer replacement covers, but the original one on the zafu is removable and washable. It's very sturdy, so I think it would wash well.
Question:	Will this work in the rear speakers in my 99' crv
Answer:	It could be used outdoors. But it's cloth, so put something under it & bring it inside when done.
Question:	Why is this marked as a prime item and it takes 8 days for delivery
Answer:	The zafu cushion has a handle sewn on the back. The square cushion comes with a strap to tie around the cushion for travel. Hope this helps.

Product description

8” HYPER 200 SERIES SUBWOOFER Proprietary Heavy Gauge Stamped Steel “Alpha” Basket Laminated non pressed pulp paper cone EPDM surround for Enhanced Control at Extreme Temperatures Rated at 200 watts RMS / 600 watts MAX 86 dB @ 1w/1m 38 oz Magnet Frequency Response: 35 500 Hz Single 4Ω 1½” voice coils 8 gauge nickel plated input terminals Mounting Dimensions Depth: 94mm / 3.70” [Through Hole: 184mm / 7.24”] Diameter: 220mm / 8.66”

From the Manufacturer

Alphasonik HSW208 Hyper 200 Series 8”

• 8” HYPER 200 SERIES SUBWOOFER
• Rated at 200 watts RMS / 600 watts MAX
• Proprietary Heavy Gauge Stamped Steel “Alpha” Basket
• 86 dB / 38 oz Magnet / Frequency Response: 35 500 Hz
• Mounting Dimensions Depth: 94mm / 3.70”

User questions & answers

Question:	Will this polk audio single 4-ohm db840 be a suitable replacement for the single subwoofer in a hyundai veracruz
Answer:	i don't know what the wattage of your system . This speaker puts out 320 watts max at 4 ohms. It is a good speaker...
Question:	Will this subwoofer will fit in a Cadillac car
Answer:	Yes this sub will fit as it is universal *some modification may be necessary for proper fitment
Question:	Is it water resistant? Looking to install this on a motorcyles saddlebags
Answer:	Hello, They are water resistant. They should not be immersed in water or allowed to be exposed to extreme weather conditions for prolonged periods of time.
Question:	any difference in the sound vs. the stock subwoofer for a 2002 chevy suburban
Answer:	Yes, don't get the single 4 ohm voice coil. Get the dual voice coil version. The sub in my tahoe was 2 ohm and I had very little bass after installation. The dual can be wired to 2 ohms and will sound much better. I have a 2001 tahoe with sub in the rear driver side. I highly recommend looking at replacing the head unit, bypassing the built in amp and adding a rear sub amp as well.
Question:	Have a 13 Jeep Wrangler does this connect to the factory stereo without any problems. I have the sub in the back but looking for additional punch
Answer:	I know this is too late, but this was an easy install in my Jeep using the factory stereo. It was an awesome addition to the Jeep, and is certainly a whole lot louder than a 6x9. Plus, you can tuck it under the seat or in the back in the rear tray. It wastes virtually no usable real estate.
Question:	Does this unit have good deep bass or more thump
Answer:	Good deep base.... although if I crank up the base on the device and adjust the radio in the car I get a little thumping.
Question:	I have 14' jeep wrangler 2dr. Will this kit fit under the seat? and do I need to get the amp to install this
Answer:	Yes we have installed many of these under the seat of the Wranglers at our retail stores. It comes with all the wringing you will need. Give us a call if you would like to bundle it with some new Kicker speaker as well. 800-854-5821 M-F 9a-5pm central
Question:	It shows the power cable and fuse does it really come with these wires or will I need an amp kit
Answer:	It comes with all that. No amp kit needed. Also no need for other extras... It has everything to hook up to your stock or aftermarket system.
Question:	Can iconnect this to my Rockville rpg 10 inch bluetooth speaker
Answer:	You can with an aux cable with one open end , that’s means one end with the wires exposed to connect to speaker ,
Question:	Will a 1100 watt monblock on 2 of these be ok
Answer:	if your refering to a amplifier at 1100 watts its ok to use however you just want to make sure you don't turn it up pass the speakers power handling point or your will damage the speaker it self. you also want to look at how many watts your amp kicks out in (RMS). THAT WOULD BE THE TRUE POWER WATTAGE. OH AND MAKE SURE YOUR 1100 MONBLOCK IS COMPATABLE WITH 4OHM SPEAKERS AS WELL. remember any time you have a amp or reciever that is higher than the speaker power handling and the ohm capability matches you can use. just dont turn it full max because the amp kicks out more power than the speaker can handle which is good i would say because that insures you will get the best sound provided the speaker is a quality speaker to began with
Question:	I want to buy the box to replace the subwoofer for pyle 1000 watt and my question is if the box is compatible with my pyle 1000 watt
Answer:	Both box and sub are complete garbage. I put a 500rms sub in it (because the pyle blew) and the box broke :| the box opened up from every angle. Came apart mostly
Question:	Would a 2100 watt amp blow it
Answer:	If you were to tune the amp using math to calculate the max power output the amp will output, you could have this installed in a 2100 watt system and NOT blow it up or damage it in any way. So the answer depends on how much of the 2100 watts is being pushed through the speaker in question. 2100 watts (full power) would destroy the voice coil in this case.
Question:	What amp will work with two 12s
Answer:	Find a mono block d class at least 800 watts.
Question:	Is this a shallow mount sub
Answer:	Define shallow... Is this a spoof question?
Question:	I'll install sub with a mono amp. What's the difference between 2 ohms and 4 ohms sub? Can I use it with my amp
Answer:	Every one of these answers are total garbage and lack of impedance knowledge. Depending on whether you're running them in a series or parallel, or a series parallel, this changes the ohm load to the amp. 4 ohm dvc subwoofers can be wired in a 4 ohm load down to a 1 ohm load, depending on wiring and number of subs. A dvc 2 ohm speaker can be wired down to as low as a .5 ohm load or a 2 ohm load. You better quality sound the lower the ohm load, make sure both speakers and amp are capable of carrying the same load.
Question:	What is the mounting depth
Answer:	6.25 inches

Product features

Pyle PLQB10 10-Inch 500 Watt Bandpass

• One 10'' High Power 4 Ohm Subwoofer
• Blue Polypropylene Cone
• Specially Treated Black Rubber Edge Suspension
• 2'' Aluminum Voice Coil
• Bandpass Alignment For Extra Deep Bass
• Plexiglass Front Window
• 500 Watts Max Power Handling
• Frequency Response: 30Hz-700k Hz
• Dimensions: 12''H x 12''W x 17''D

Product description

Relieve your stereo, and free up some space, while giving your vehicle the bass it’s been missing with the BLAUPUNKT Super Flat Active Subwoofer. Standing at the meager size of 2. 5” tall, this compact hideaway subwoofer can fit under any car seat as it bolsters your stereo with a 120W output (200W max). Comes equipped with a built-in variable Crossover control (50Hz~150Hz), allowing you to regulate how much upper and mid-bass the BLAUPUNKT Super Flat Active Subwoofer produces. No need to worry about this little subwoofer over-heating while it’s busy boosting your bass at +/-12dB, the aluminum die-cast heatsink will keep your subwoofer running smooth at its optimum temperature. With over 90 years of innovation and excellence under their belt, you can rest assured that BLAUPUNKT Super Flat Active Subwoofer will deliver a sound experience that will blow any other option out of the water. Once you hear it you'll finally realize what big, rich bass sounds like.

• Built-in MOSFET 200 W max. monaural amplifier
• Built-in variable Crossover (50-150Hz).
• Low Pass Filter for DVD 5. 1
• Compact Hideaway Size (2. 5" Tall)
• Perfect for - Saving space, Convertibles, Cargo vehicles, Speaker, and RCA level inputs

User questions & answers

Question:	What is the RMS power of this subwoofer
Answer:	120 RMS 200 MAX. Good to add some bottom. Not going to shake windows. Pretty clean. Works if space is a issue. Had to put in hatch on my GTI. Wouldn't fit under the seat. I have the older version in my Mazda, it doesn't have as many watts but sounds good. I've had the old one in for five years, no problems. Not a boomer just a low end filler.
Question:	Has anyone used the hi level inputs on this, negating the need for an in line converter
Answer:	Yes, fed off of speaker wires directly to the unit.
Question:	is this an 8 in or 10 in subwoofer
Answer:	It's a 10". For the price it was perfect for me and fit under my seat 2005 WRX wagon.
Question:	Are you sure this is a 10" speaker? I see it listed on other sites saying it's a 8". Same model number
Answer:	No, it is an 8". The literature was misleading. They also make an older 8" that puts out less power. 100rms ? I have it in another vehicle. It sounds good. It won't shake the mirror. The older one has been in the other car for over 9 years, no problems. Adds bottom not a shaker. I like music tight not muddy. They both have done the job. Sorry about any confusion. I was going by the description.

Product description

Pyramid PW1048USX 10-Inch 500 Watt High Performance 8 Ohm Subwoofer

• 500 WATT POWER: This high powered audio projection subwoofer system has a maximum power output of 500-watt peak power / 250 watt RMS so you can play your favorite tracks as loud as you want and with style
• NON-FATIGUING RUBBER SUSPENSION: The high-performance car woofer speaker has a non-fatiguing rubber suspension along w/ bumped & vented motor structure that completes your woofer enclosure system. Features 4.21” mounting depth for easy installation
• 2” KAPTON VOICE COIL: This car speaker has 2” high-temperature Kapton voice coil, 85.6 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound
• 10 INCH PAPER CONE: Pyramid follows the standard size for most car stereo systems & created this 10" black strong non-pressed paper cone driver perfect for new speaker construction, replacing worn or blown speakers in your favorite loudspeaker cabinet
• 60 OZ MAGNET STRUCTURE: This subwoofer speaker has a 60 oz magnet structure. The heavy-duty housing along w/ the stamped steel basket that provides a strong foundation. It is also super easy to install to your vehicle's sound system

User questions & answers

Question:	Does this mean 2 subwoofers or
Answer:	If u do that the sub will take the power of the front and rear channel making your 4 door speakers weak and the bass will still over power your highs plus that amp is only really pushing out 5-600 rms
Question:	Will this work as a replacement for the Logitech Z-5500 sub
Answer:	Depends on the wattage of each speaker. Add the RMS(root means square) wattage of each speaker together, that will let you know of this amp will work for you. If the RMS is equal or less, this amp will work and is pretty awesome. If its higher the 2400.4 would work well. If you only have max wattage, subtract 20% of the max wattage value. That will get you in the ballpark of the RMS If you only have peak wattage, subtract 40% of the peak wattage value RMS is the most stable operating wattage for the speaker, getting close will give you max life and max sound quality at higher volume
Question:	are the speakers sold in pairs? is price listed ($30) for each? or for two
Answer:	Max 4 6×9 for good and louded audio or 6 6x9 for regular audio loud
Question:	Is this for sure 8 ohm? The picture says 4 ohm on the back of the magnet
Answer:	The Unit may fit your car/truck. However, you may need three aftermarket accessories to complete your installation: · Dash kit · Wire harness (Connects car wiring to stereo wiring) · Antenna adapter You will want to use MetraOnline's vehicle fitment guide to find the part numbers you will need. Metra has all these products for sale on Amazon.