12 best subwoofer amplified

Product description

If you are looking to add bone-crushing bass to your outdoor excursions in your Polaris General UTV, then you need the MTX GENERAL-10 Amplified Subwoofer Enclosure. This subwoofer enclosure is designed to mount directly under the driver's side dash of specific Polaris General UTV models and is invisible once installed. Please make sure this enclosure fits your model. The subwoofer enclosure is rotationally molded using linear low-density polyethylene creating a durable finish that is weather-resistant. The subwoofer enclosure mounts using existing mounting locations and does not require any cutting or drilling to install. The enclosure includes a 10-inch weather-resistant 250-watt RMS subwoofer featuring a polypropylene cone that delivers exceptional low-frequency output. The woofer unit includes an integrated 250-watt class D amplifier that only requires power and signal. This saves you from having to purchase a separate amplifier to power your enclosure and to find a place to mount it. This subwoofer integrated amplifier is designed to get bass in your Polaris General UTV without losing any of your space. The MTX GENERAL-10 Amplified Subwoofer Enclosure will take your Polaris General to the next level of bass-filled nirvana.

• FITS POLARIS GENERAL MODELS: 1000 EPS 2016-2018, 4 1000 EPS 2016-2018, 1000 EPS Hunter Edition 2016-2018, and 1000 EPS Ride Command Edition 2016-2018
• BUILT-IN CLASS D AMPLIFIER: Easy installation as the integrated 250-watt RMS class D amplifier only requires power and signal
• EXTERNAL GAIN CONTROL: Low-level input with external gain control gives you power over the quality of the bass sound
• 10-INCH SUBWOOFER: High-efficiency 10-inch polypropylene subwoofer produces quality low-end bass to give your sound system more range
• NO CUTTING OR DRILLING TO INSTALL: Mounts in center console with no cutting or drilling required and is invisible once installed

User questions & answers

Question:	I would like to purchase this but my question is is it going to last being occasionally submerged
Answer:	Generally, you get better quality sound using a sealed box (but it requires slightly more power from your amp.) It's better to use a vented box if you want the extra loudness and boom.
Question:	Has anyone installed this on a 4 seater with ride command
Answer:	Depends on the depth of the box, but it is not very deep of a speaker.
Question:	Is this compatible with the Polaris premium sound bar
Answer:	No
Question:	Will this fit the 2018 Polaris General
Answer:	9.173 inches for inside diameter. 233 mm.

Product description

This pre-owned or refurbished product has been professionally inspected and tested to work and look like new. How a product becomes part of Amazon Renewed, your destination for pre-owned, refurbished products: A customer buys a new product and returns it or trades it in for a newer or different model. That product is inspected and tested to work and look like new by Amazon-qualified suppliers. Then, the product is sold as an Amazon Renewed product on Amazon. If not satisfied with the purchase, renewed products are eligible for replacement or refund under the Amazon Renewed Guarantee.

• powered polypropylene subwoofer with built-in amplifier that matches the woofer performance at 150W RMS or 450W Peak.
• 12" (305mm) woofer
• 35 - 120Hz frequency response
• Slipstream port eliminates port noise and provides distortion-free bass at high output levels
• Polypropylene Woofer Cone
• Included components: One SUBBP12AM powered Subwoofer/enclosure, owner's manual and remote control

Product description

Bazooka 8" 100W MARINE WOOFER

• Marine-Ready 8" Amplified Bass Tube waterproof 8" Woofer With Foam Surround power Output: 100 Watts Rms
• Low-Pass Filter (85 Hz, 18 Db/Octave)Subsonic Filter (12 Db/Octave At 35 Hz)Frequency Response: 39-85 Hz
• Sensitivity: 105 DB speaker- And Preamp-Level Inputs9-7/8"W X 8-9/16"H X 18-3/8"D
• Passive bass tube for marine systems
• Eight-inch, waterproof subwoofer with 100 Watts power handling
• Stainless steel hardware
• Weather-resistant, velcro-reinforced mounting straps
• Salt fog and UV certified

User questions & answers

Question:	Could this be a good speaker for a side by side buggy to add bass
Answer:	about a foot
Question:	How many amps does this draw
Answer:	Yes
Question:	I am playing normal level when listening to music. So everybody can just talk. Will this suboofer at that level draw your battery fast empty
Answer:	I use this speaker with my nano iPod. It doesn’t have the correct connection for a phone. 8
Question:	is this a self amplified tube, not requiring an amplifier
Answer:	You can use it on any device that has a headphone jack.

Product description

Add deep bass excitement and extended dynamic thrills to your music or movie sound system with the easy-to-connect and easy-to-use PSW 10. Its 10" Dynamic Balance composite cone driver and non-resonant enclosure produces deep, smooth response with superior detail and accuracy, while limiting distortion. The sub is powered by a high-current amplifier producing 50 Watts RMS/100 Watts dynamic power. A rotary volume control adjusts the volume of the subwoofer relative to the other speakers in the system and the unit offers a continuously variable low-pass filter, adjustable from 80-160 Hz. Easily accessible, professional-grade line- and speaker-level inputs, and speaker level outputs, allow easy connection to any system.

• POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
• LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion
• Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt rms amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
• EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
• A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete

User questions & answers

Question:	What in your opinion is the best power setting for normal use, "on" or "auto" for this unit
Answer:	I would say depends if you use the item everyday/constantly as your sound for your surround. Or if you use surround/theater occasionally. If the latter I would use `on/off` , if you use it often or primarily the auto would be the way to go in my opinion. Plus is the sub easy to get to? Auto is great if its behind furniture or out of reach,etc.
Question:	Does this speaker have a volume control? Thanks
Answer:	Just to clarify something a previous reviewer stated: "Note: If you are using a Sub out/LFE connection from your receiver turn the Low Pass all the way up. " This does not apply to receivers with which you can specify the low-pass cutover frequency. For example, my modest Onkyo receiver has cutover settings of 80/100/120 HZ for the LFE/Sub output. If you have this option, you should consult your main speaker's manual for suggested low-pass settings or simply tune them by ear. For my setup, 120 HZ was both the recommended and best-sounding cutover frequency. 160 HZ was a little muddy :)
Question:	Can this sub be added to a Vizio 2.0 sound bar, for small to medium-sized HDTV's? If not, what should I get? For TV/Games/Music
Answer:	Like John, I too have a Vizio 2.0 sound bar and this pairs very well. I have a small theater room (10 x 20) and this one 10" fills the room. This sub is the best bang for the buck you can get.
Question:	Do I need a Y-adpater? A sound tech told me one sub wire would do the trick and just plug it into the L and ignore the R. Is this true
Answer:	Initially, used a one wire connection. Sounded OK, but .... Got a "Y" connector, attached at the rear of the amp, ran L & R wires to the PSW10: sounds amazing now and very adjustable. Need to get the PSW12 to get a one wire connection. Am very satisfied with this sub and would recommend it. Used in a 12' X 20' room, front/back/center and now the sub. Tom

Product features

Single 10" Subwoofer

• PSW enclosures are designed and engineered for perfect volume, minutely tuned for distortion-free low frequencies, and internally braced and damped to eliminate internal standing waves and other performance-robbing resonances.
• This unique configuration uses a specially tuned and directed port to more efficiently produce maximum bass impact.

100 Watts

Unique design keeps your subwoofer stable and steady even at radical volume levels, for more efficient use of power. No more "escaped washing machine" syndrome.

Laser-Based Klippel Measurement Technology

Our state-of-the-art Klippel distortion analyzer optimizes the woofer's motor structure, voice coil alignment and suspension for smooth, unimpeded movement over a broad spectrum of the lower frequencies to ensure the best, most efficient performance even at extreme listening levels.

Resonance-Free Dynamic Balance Driver Materials

PSW Series subwoofers outperform the competition with durable, resonance-free Dynamic Balance driver materials that stay stiff and move fast. You experience deep, musical low frequencies and thrilling effects with superior system blending.

Easy Connection to Any System

Inputs

• Audio Inputs: Stereo Line Level - RCA, Pair (L/R) Analog RCA.
• Speaker Inputs: Pair of Spring Terminals.

Outputs:

• Audio Outputs & Speaker Outputs.
• Pair of Spring Terminals.

Unique Design Keeps Your Subwoofer Stable

Unique design keeps your subwoofer stable and steady even at radical volume levels, for more efficient use of power. No more 'escaped washing machine' syndrome.

Product description

PowerBass STA-10 Hideaway 10" Amplified Bass Enclosure The STA-10 features an Ultra Efficient Class D mono amplifier perfectly matched to power the 10-inch woofer in an exclusive passive radiator design for more bass in less space. They developed a compact trapezoid shaped enclosure, perfectly tuned to get the most out of the proprietary 10-inch subwoofer. The geometric design maximizes transient response, reducing the negative effects that a small enclosure can have on the subwoofer by dispersing and dissipating standing waves away from the subwoofer and the result is cleaner, deeper bass in a very small space. Supplied with “plug in” connectors for speaker and power, installation is simple and straightforward. Also since no holes need to be cut the STA-10 is a perfect choice for leased vehicles that could use a little extra bass. Features - Single 10" 200 Watt RMS Amplified Under Seat Subwoofer Enclosure Extruded Aluminum Enclosure with Dynamic Damping 10” Injection Molded PP Cone Woofer 1.5" KSV Voice Coil Former 1-Channel 200 Watt High Efficiency Class D Design High Level (Speaker)/Low Level (RCA) Input Soft Delay Turn On/Off Circuit Auto Turn-on (high level input only) Variable Low Pass Electronic Crossover Variable 12dB Bass Boost EQ @ 45 Hz Variable Wired Remote Gain Control Included Mounting Hardware Included 10.9"W x 3.2"H x 14.4"D Specifications - Selectable Subwoofer EQ: 0dB - 12 dB @ 45 Hz Inputs: Low Level (RCA)/High Level (speaker level) Equalization Boost/Cut: 0dB - 12 dB Subwoofer Frequency Range: 20 Hz - 200 Hz Power Supply: Unregulated PWM Material: Extruded Aluminum 2-ohm Power: 200 watts RMS / 400 watts max Subwoofer EQ Frequency: 45 Hz Variable Subwoofer EQ: 0dB - 12 dB Dimensions (in Inches): 3.2" x 14.4" x 10.9" Output Power (14.4 V) @ 2 ohm: 200 watts RMS / 400 watts max Frequency Response: 20 Hz - 200 Hz

• Single 10" 200 Watt RMS Amplified Under Seat Subwoofer Enclosure
• Extruded Aluminum Enclosure with Dynamic Damping
• 10” Injection Molded PP Cone Woofer
• 1-Channel 200 Watt High Efficiency Class D Design
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output

User questions & answers

Question:	Can this fit in a side by side? Any water resistance to it
Answer:	The box is put up there by Amazon not Casio this watch should be received with the same style of box but with the Casio Logo instead of G shock
Question:	Will this connect to a xl1000 sound bar
Answer:	The battery will last about 10 years, as indicated in the description below the photo. Any jeweler can open the back of the watch and find a replacement # and battery (often in stock) when the time comes, should you desire to keep the watch. They usually charge about $5-6 total to do so, which includes the price of the new battery. Hope that helps.
Question:	Will the 10” 175 watt version fit under the drivers seat of a 2019 F
Answer:	Just a speaker.
Question:	Does the 10” 175 watt version come with all wires needed to install or will I still need to purchase an amp wiring kit
Answer:	Yes Via the 3.5 mm Jack.I love this speaker

Product description

240 Watt Amplified, Loaded, Carpeted, Vented MTX Subwoofer Tube with Remote Bass Control and 8 Gauge Amp Wiring Kit. MPACT SIZE - HUGE PERFORMANCE: n't be fooled by the compact size of the RT8PT Tube, this amplified and vented bass tube is designed to deliver bass like only MTX can. This low profile unit can be installed in virtually any vehicle without sacrificing space. The 8" subwoofer, integrated amplifier, and vented enclosure delivers bass you have to experience to believe. ELEVATE YOUR SOUND The 8" high output woofer used in this unit includes a lightweight and durable polypropylene cone that moves air more efficiently for impressive bass output that you can feel as well as hear. The integrated class D amplifier can deliver up to 120 watts RMS power to the subwoofer using either high or low level inputs, so it is easy to connect to any type of radio. EASY MOUNTING The Tube comes with two straps to securely mount it anywhere on the floor. This technique means you can also loosen the straps and conveniently remove it when you want the floor space to haul more cargo, or put it in another vehicle for the vacation trip coming up. The unit also includes an external bass control that can be connected to the amplifier and mounted near the driver allowing for subwoofer volume adjustment on the go. This enclosure is an easy to use and install upgrade that any music enthusiast can take advantage of with little investment. And get ready to rock, ‘cause this package is gonna boogie your booty.

• MTX 8" Amplified, Loaded Subwoofer Tube
• 240 Watts max. power, 120 Watts RMS. 8 Gauge Amp Wiring Kit is included (kit ships from separate location and may arrive on a different day)
• Vented, Carpted Enclosure H 9.84" x W 9.84" x L 21.25"
• High Level and RCA Inputs enable setup with any system
• External Bass Control is included for convenient control of volume from front of vehicle.

User questions & answers

Question:	do you think this subwoofer model is good for a sedan model? do you think it affects considerably listening to the bass? or are those that are insta
Answer:	I've used it temporarily on the sealed enclosure version of these. BOSS amps are cheap for a reason though. Poor sound quality and it doesn't push anywhere near the 1000 watts these can handle. If you want a cheap amp that actually sounds good I'd recommend the Power Acoustik rzr1-2500d it's not 1000 watts RMS but it'll do 700+ on good electrical & sounds Way better than the boss amp
Question:	Does it have Speaker Screen cover
Answer:	I have had these subs in the box 4 going on 6 years with a 3000 watt competition massive amp pushing 800 watts RMS bridged making it 200% overpowered I paid $122 for them six years ago and they are still thumping to this day
Question:	Does it have auto shut off
Answer:	Everything you see, you get...no speaker wires though...
Question:	Isnt 8 awg cables overkill? Why not 10 or 12 awg
Answer:	Yes it has relief areas for the buttons. But you have to be careful when you put it on or you can turn the unit on by accident.

Product description

The Blaupunkt 300W 8" 300W Amplified Subwoofer (GTHS80) provides the perfect base tone for your car audio. Made with the highest technical quality to ensure maximum reliability and durability, this eight-inch car audio amplified subwoofer features variable bass boost, adjustable input sensitivity, and a low-pass filter.

Maximum power is 300 watts, with RMS power handling of 100 watts.

8" Slim Woofer

RCA Low-Level input: 0.15-0.55V:

High-Level Input : 6V

Power and Protection LED

Variable Bass Boost 0 to +18dB

Thermal Short and Overload Protection Circuits

Phase Selector Switch: 0 degrees or 180 degrees

Variable Input Gain Control

Adjustable Input Sensitivity Selector(0.15V-0.5V)

Variable Low-Pass Filter (40-250Hz)

Max Power: 300W

RMS Power: 100W

THD: <1 percent

Signal-to-Noise Ratio:>88dB

Frequency response: 20Hz-250Hz

Input Sensitivity, High Level: 0.5V

Input Sensitivity, Low Level: 150mV

Fuse Rating: 30A

• 30W 8-Inch Amplified Subwoofer
• Made with the highest technical quality to ensure maximum reliability and durability
• MAX power handling 300 watts (300 Watts Peak) and an RMS power handling of 120 watts (300 Watts Peak)
• Features variable bass boost, adjustable input sensitivity, and a low-pass filter

User questions & answers

Question:	What is the impedance
Answer:	NoI have ran on high level for 3-4 hrs, normal level another 3 hours. Boat still starts on same battery. I have a 2nd battery, but I've never had to use it. Battery's are on there 3rd year. I have been very happy with this purchase.
Question:	Where can I get a new power/signal connector for this unit
Answer:	Yes. It's self amplified and sounds great on my boat.
Question:	Do you have to have to install the external volume control for this to work
Answer:	That Sir, can be a tricky question. However, you can find them on Amazon and ebay. I would use Amazon. On the back of my band is the number:671 or G71 (a little small to see), followed by the numbers, N11 18. In the past, I have been able to replace them just by typing in replacement watch band for model HDA 600. In any case, best of luck to you.
Question:	Can I use cigarette socket to power it
Answer:	To reset the date, you can do change it one of two ways. First, if you pull the crown out you will feel two click (the crown is the little stem on the side of the watch). The first click is just for the date and is about half the total distance the crown can be pulled. You can advance the date using the crown by rotating it, but only advance it. You can not change the date by incrementing it down. The other way is to way is to pull the crown all the way out until it stops and advance the time. The date will advance with each 24 hour rotation of the crown. If the watch is set within the P.M. range, the first time it changes may take less than 24 hours. Changing the date will take some time if you need to advance it for more than a couple of dates. This is a simple analog watch setup like most where the date will only advance (move forward or increase). Hope this helps.

Product features

GTHS80

Deep and powerful bass tones in your car that will give your music a new kind of energy.

Technical Data

8” Slim Woofer, RCA Low Level Input: 0.15 – 0.55V, High Level Input : 6V, Power and Protection LED, Variable Bass Boost 0 to +18dB, Thermal Short and Overload Protection Circuits, Phase Selector Switch: 0° or 180°, Variable Input Gain Control, Adjustable Input Sensitivity Selector(0.15V – 0.5V), Variable Low Pass Filter (40 – 250Hz), Max Power: 300 Watts, RMS Power: 100 Watts, THD: <1%, Signal-to-Noise Ratio:>88dB, Frequency Response: 20Hz – 250Hz, Input Sensitivity, High Level: 0.5V, Input Sensitivity, Low Level: 150mV, Fuse Rating: 30A, Dimensions: 13.78” x 8.86” x 2.95” (350mm x 225mm x 75mm).

• Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
• Mosfet Power Supply - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
• Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the PA8W to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the PA8W with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

User questions & answers

Question:	Is this ported
Answer:	Audiopipe 1800 watt amp
Question:	What is the rms
Answer:	Is the 4 ohm subwoofer
Question:	I understand that the 3 year warranty is only for purchases directly from amazon and not from third party sellers? amazon hasnt sold thesefor awhile
Answer:	Red to red black to black on both then agian red to red then black to black from subs to connect
Question:	How long is the wiring on the remote? i have a dodge magnum (a sportwagon) and i would like to put this all the way in the back
Answer:	Just one, great price may I add, for a quality speaker👍🏽

Product description

Don't judge this subwoofer enclosure just by the looks of it. This MTX 8 Inch 120W RMS Amplified Single Vented Subwoofer Enclosure may be small, but it produces giant bass. This bass box is everything you need for a great bass system. It's a convenient size for those who have outgrown having a trunk full of subs. If you are that music enthusiast who wants to experience some bumpin' bass without taking up half of your vehicle, this subwoofer enclosure is right for you. It's a lightweight, durable polypropylene cone with 120 watts of RMS power and uses high or low level inputs making it easy to connect to any system. External Bass Control is included for handy volume control from the front of your vehicle. Get some thumpin' bass in your ride and enjoy your music as you drive with the MTX Subwoofer Enclosure.

• The MTX 8 Inch 120W RMS Amplified Vented Subwoofer Enclosure delivers hard hitting, hard working bass
• Specifications:
• Vented enclosure with integrated amplifier
• Subwoofer Size: 8 inches
• RMS Power Handling: 120 watts

User questions & answers

Question:	Does it come with the hi input wires for the amp
Answer:	Hello! Conversion method: double click volume + button.（Or do this: press and hold the volume "+" button and volume"-" button at the same time before connecting the Bluetooth of the mobile phone to change the automatic or manual answer mode.）.The headset includes both automatic and manual listening functions.
Question:	Is there a 10" version of this
Answer:	Sorry haven't gotten that far in using this yet. Im having trouble with my music disconnecting after a couple of songs each time I use it.
Question:	do i need to run a power supply from my battery for this unit
Answer:	Not sure about the exact length but it fits my medium Shoei Qwest helmet just fine with a little room to spare. Talking about cable going from left speaker wrapped around back of helmet to right speaker.
Question:	What is the nominal/peak wattage of this
Answer:	Direct connect. I connected them to my front door speakers.

Product description

Want a big bass upgrade? Our Bass Systems have everything you need to add extra lows to your vehicle. These systems have built-in amplifiers and subwoofers for an all-in-one solution. We also offer an array of loaded enclosures which are non-amplified enclosures engineered to the exact Thiele/small parameters for the subwoofer they are showcasing for maximum output. SRX10SP bass systems are designed with simplicity and performance in mind. These bass systems feature a subwoofer and enclosure with a built in amplifier. The sealed enclosure design was build to the exact parameters for the included 8" Street Reference subwoofer which maximizes the bass output and performance of the system. Don't believe a single 10" subwoofer can give you the extra lows you're looking for you? You'll just have to experience the power of the SRX10SP bass system. Features: Built in amplifier Sealed design Embroidered carpet Bass level control included High and low level inputs Specifications: Subwoofer Size (in) 10" Subwoofer RMS Power (w) 250 Subwoofer Peak Power (w) 500 Dimensions (in) 16.75" x 10.25" x 13.2"

• Built in amplifier
• Sealed design
• Embroidered carpet
• Bass level control included
• High and low level inputs

Product description

Give your vehicle's audio system an upgrade with the SSL LoPro8 Class A/B 8"" Low Profile Amplified Subwoofer. This powerful Amplified Subwoofer features 600 Watts Max Power with a MOSFET power supply to take your music to the next level. With High and Low Level Inputs it can be hooked up to just about any in-dash stereo. At a height of just 3"", it's perfect for fitting into tight spaces, including under the seat of many vehicles. Customize the sound with the Variable Low Pass Crossover, Bass Boost, Subsonic Filter, Phase Control and Remote Subwoofer Control. Gear up and get your music thumping with the Sound Storm LoPro8

• BUILT-IN AMPLIFIER: With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
• VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the LOPRO8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• DIMENSIONS: 15” x 9.75” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
• WARRANTY: Sound Storm provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	Is this an amp sub combo meaning i just need to plug the wires and such directly in it, meaning i dont need a seperate amp
Answer:	It would not fit under the seat in my 2020 F250. I sent it back.
Question:	how tall is this sub-woofer/amp
Answer:	You will need an amp wiring kit still.
Question:	Can I put this in the trunk of my harley davidson motorcycle and still enjoy the bass sound
Answer:	Yes, installed in golf cart. The bass pounds pretty good for one 10" woofer. I also purchased two XS-Power-XP750 batteries for the power for radio and amp, no problem listening 8+hrs cranked midway.
Question:	How would would I intall this? I have an aftermarket head unit with no RCA outputs. (Sony MEX BT
Answer:	30 amps

Product features

Deep Bass Low Profile

Enjoy the rich sound of Bass in just about any vehicle with the SSL LoPro8 Class A/B 8 inch Low Profile Amplified Subwoofer. With 600 Watts Max Power and MOSFET power supply and High and Low Level Inputs, this Amplified Subwoofer can be hooked up to just about any in-dash stereo. With a height of just 3 inch, it's a perfect solution when space is an issue as it can easily fit under the seat of most vehicles. Customize the sound with the Variable Low Pass Crossover, Subsonic Filter, Phase Control and Remote Subwoofer Control.

Built-In Amp and High and Low Level Inputs

Systems with a built-in amplifier do not require the addition of an external amp. They already have the power to play louder.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Variable Low Pass Filter and Subsonic Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Phase Control

Phase control lets you switch the speaker phase with the amp if your speakers or subwoofer are hooked up 'out of phase'.

Low Profile

Low-profile subwoofers are a great choice for space-constrained areas without compromising on power and performance.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Product description

Sound Storm Laboratories US10 Amplified Car Subwoofer - 1000 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great For Vehicles That Need Bass But Have Limited Space

• Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
• PWM - Pulse Width Modulated design simplifies power supplies. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry. It’s efficient & reliable
• Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the US10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low-Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the US10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Phase Control - Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”