14 best skar audio car amplifiers
Skar Audio is a well-known brand in the car audio industry, particularly known for its car amplifiers and subwoofers. Skar Audio car amplifiers are designed to enhance the audio experience in your vehicle, providing powerful and clean amplification for your car's sound system.
Here are some key features and information about Skar Audio car amplifiers:
Amplifier Classes: Skar Audio offers a range of amplifier classes, including Class D and Class AB amplifiers. Class D amplifiers are known for their efficiency and compact size, making them a popular choice for car audio installations.
Power Output: Skar Audio amplifiers come in various power ratings, so you can choose the one that suits your specific audio needs. They offer both mono and multi-channel amplifiers, which are suitable for driving subwoofers, speakers, or a combination of both.
Build Quality: Skar Audio is recognized for its solid build quality. These amplifiers are often designed with sturdy heat sinks, high-quality components, and advanced cooling mechanisms to ensure reliable performance, even in demanding conditions.
Protection Features: Skar Audio amplifiers typically come equipped with various protection features, such as thermal, short circuit, and voltage protection. These safeguards help protect your amplifier and your vehicle's electrical system.
Size and Form Factor: Skar Audio offers a range of sizes and form factors to accommodate different installation needs. Whether you have limited space or want a more compact amplifier, there are options available.
Sound Quality: Skar Audio amplifiers are engineered to provide clean and powerful audio output. They aim to deliver clear and distortion-free sound, enhancing your overall car audio experience.
Warranty: Skar Audio often provides warranties on their products, offering peace of mind to customers in case of any issues or defects.
When considering a Skar Audio car amplifier for your car audio system, it's essential to match the amplifier's power output and compatibility with your speakers and subwoofers to ensure optimal performance.Additionally, always follow the manufacturer's guidelines and recommendations for installation and usage to get the best results from your car audio setup.
Below you can find our editor's choice of the best skar audio car amplifiers on the market
Skar Audio RP-150.4ABM 1,000 Watt Full-Range Class A/B 4-Channel Marine Amplifier
Product description
Skar Audio engineered the RP-150. 4ABM marine amplifier to set a new standard in high power marine amplifier performance. This four-channel marine amplifier is 2-ohm stable and utilizes a wide array premium internal components, such as its high speed MOSFET power supply as well as an advanced marine grade PCB board layout. Conservatively rated at 1, 000 watts RMS power (250 watts x 4 channels), this amplifier will bring the speakers on your boat to life with unrivaled power output and sound clarity. The RP-150. 4ABM is extremely versatile as well with its compact physical design, which allows it to fit in a variety of tight or small locations on your boat. Also present on one side of the amplifier is a built-in user control panel that is fully adjustable - allowing you to dial in your sound exactly how you want it. Featuring adjustable controls for gain, high pass filter, low pass filter, a crossover switch, and more, you'll have full control over your listening experience. In addition to all the above features, this model also features four-way protection circuitry, which will give the user the peace of mind knowing they are protected against damage to the amplifier for various reasons - including electrical shortage, overheating, low voltage, and more. Our marine amplifiers feature a special marine coating internally that allow them to withstand the harshest conditions for long lasting use. Finally, the RP-150. 4ABM also utilizes a powerful cooling fan that is mounted on the inside back plate of the amplifier which helps keep the unit cool even at the highest levels of power output for extended periods of use.
- 1000-Watt MOSFET 4-Channel Class A/B Power Marine Amplifier
- RMS Power at 2 Ohms: 250 Watts x 4 Channels
- RMS Power at 4 Ohms: 150 Watts x 4 Channel
- Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
- User Adjustable Controls: Gain, Variable LPF, HPF, Bass EQ Switch
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
- Signal to Noise Ratio: 105 dB | Frequency Response: 20 Hz - 20, 000 Hz
User questions & answers
| Question: | Am i reading this right, is this amp 2' long |
| Answer: | haha! No need for the charger. The laptop got the power for the hub to be connected. Just make sure you have the connecting line to plug in the hub and the computer, That's all you need. |
| Question: | Is it possible to hook a bass nob to it |
| Answer: | That is correct, in theory you can for Windows hoever just make sure your laptop type C port supports not only data and power but also video. I recently bought a laptop HP with quite strong performance set up but the type C port was not video compatible and this nice hub did not work for the exact same purpose you are asking...I wish this would have been advertised..other than that the product is nice ! |
| Question: | Can you run this 3 channel |
| Answer: | Yes, it will work. I’m using 2xHDMI via hub and 3rd via my pc’s port directly. If your pc supports MST then yes. PS: I use thunderbolt 3 to hook up the hub so technically I can add another low resolution monitor. |
| Question: | What is the THD of this amp |
| Answer: | This works fine with Linux. I have not tested the network or VGA but the ports are fine. |
Skar Audio RP-75.4AB 500 Watt Full-Range Class A/B 4 Channel Car Amplifier
Product description
The Skar Audio RP-75.4AB is a powerful, efficient, and highly reliable four channel class a/b full-range car amplifier. Capable of powering an entire aftermarket upgraded speaker system in a vehicle, it packs the power that will allow you to get loud and let your speakers come alive. Featuring a high speed MOSFET power supply, premium grade internal components, as well as 4-way protection circuitry, the amplifier will operate at the highest levels of performance for hours on end safely. With a depth of adjustable user controls such as the gain, lpf, hpf, crossover, and bass eq, this amplifier is extremely versatile and can be used in so many applications. These advanced user controls will allow you to dial your sound in exactly as you want for perfect clarity, whether running active components or speakers with in-line crossover networks. The class A/B circuitry design of this model allows it to amplify your audio signal with maximum clarity and sound excellence, all while being extremely efficient. Features 8 gauge power and ground input terminal connections for maximum current flow.
- 500-Watt MOSFET 4-Channel Class A/B Power Car Amplifier
- RMS Power at 2 Ohms: 125 Watts x 4 Channels
- RMS Power at 4 Ohms: 75 Watts x 4 Channel
- User Adjustable Controls: Gain, Variable LPF, HPF, Bass EQ Switch (0, +6, +12 dB)
- 4 Way Protection Circuitry | Frequency Response: 20 Hz - 20,000 Hz
- Signal to Noise Ratio: 105 dB
User questions & answers
| Question: | Will this amp power 4 skar audio sk 6x9s good i got 2 skar audio vvx 15s on a skar rp 2000.1d and i don’t want the bass to drown out the voice |
| Answer: | It’s close to 2 feet long. |
| Question: | Would this amp be appropriate for skar audio vxi65 360-watt 6.5" 2-way component speaker system |
| Answer: | Not on this model amplifier. The 1 and 2 channel skar audio amplifiers come with a bass nob. |
| Question: | What size fuse this amplifier carry |
| Answer: | Yes if you wanted to. You just leave the other channel open. Or use channel 1 and 2, then bridge channel 3 and 4. |
| Question: | Can i run 8 speakees on this |
| Answer: | I really don't know, however, this thing is a beast! Running 4 six inch JL marine speakers in my boat and only using 150 watts/ channel. Very clean and awesome volume in an open cockpit. Just purchased 4 Skar speakers, an 8" sub and 5 channel for my camper, all Skar Audio.. very happy with the performance and love the low cost |
Skar Audio SKv2-1500.1D Monoblock Class D MOSFET Competition Grade Subwoofer Amplifier, 2200W Max Power
Product description
The Skar Audio SKv2-1500.1D is a competition grade monoblock class D subwoofer amplifier that was designed to deliver unequivocal performance and power output. As a part of the flagship SKv2 series of amplifiers from Skar Audio, this model utilizes only the highest quality internal components and features advanced engineering enhancements that allow it to outperform anything else on the market in its power class.
Whether you are competing in the SPL lanes, or looking for the absolute best amplifier to power your "daily driver" audio system, look no further - this is the amplifier for you. The SKv2-1500.1D is conservatively rated at 1,500 Watts RMS power, and at max power output can produce more than an astonishing 2,200 watts. In addition to its extreme performance capabilities, this amplifier features an advanced heatsink design that allows for maximum cooling, as well as 4-way protection circuitry, enabling the amplifier to operate efficiently at peak output levels for hours on end.
Furthermore, you'll have full reign over your amplifier with the built-in user control panel, featuring variable adjustment tunings for gain level, subsonic filter, bass boost, low-pass filter, and phase control. Versatility is key, and so you have the ability with the SKv2-1500.1D to run them strapped if desired, which is unique to our SKv2 series of amplifiers. In addition to all the above features, it also has both RCA inputs and outputs so that you can easily daisy chain multiple amplifiers together, and utilizes massive 1/0-gauge power and ground input terminals which allow for maximum current flow and therefore higher power output.
This amplifier comes with a remote subwoofer level control (bass knob) allowing the user to have full control over their bass from the front of the vehicle.
- Competition Grade SPL Class D Monoblock MOSFET Car Power Amplifier
- Peak Power at 1 Ohm: 2,200 Watts | RMS Power at 1 Ohm: 1,500 Watts
- Stable at 1 Ohm, Frequency Response: 15Hz - 270Hz
- Featuring 4-Way Protection Circuitry and 1/0 Gauge Power & Ground Input Terminals for Maximum Current Flow
- User Adjustable Low Pass Filter (Variable): 35Hz - 250Hz, Remote Subwoofer Level Control Included
- Heavy Duty Advanced Heatsink Design Allows for Maximum Cooling & Efficiency | On-board Bass Boost Control (0-9dB)
User questions & answers
| Question: | Has anyone ran the skv2 1500.1 at .5 ohms and not blown it up |
| Answer: | Yes, this amp is shouldn't be your concern. I'd be worried about those 6x9s handling this amp. I say that because though I really like Skar I've had no luck with their 6x9s. Good news is I haven't owned these sk 6x9s so you may be in luck. This amp is powering a pair of audiopipe CSL-6904 6x9 & a pair of Infinity KAPPA-93iX 6x9s in my car with a Skar EVL-15 pushed at 1 ohm with an audiopipe 1500w monoblock & fixing to strap it. The clarity of the 6x9s are wonderful at any level. |
| Question: | Is this amp good for a kicker 15 inch L7 solar boric dual voice coil at 4 ohms |
| Answer: | This is a class A/B 4 channel amp. It works great in your application. |
| Question: | Will these power dual skar audio d |
| Answer: | Well i dont think it has on board fuses like other amps.. I think higher power amps need an external fuse block to be put in the wire near the amp.. Im no expert tho.. But i would have both the fuse near the battery and near the amp match... Do some more research on the net to make sure you dont have a fuse too big or too small |
| Question: | Will this work for a sp audio sp12cx dual 2 ohm at 2500 rms? or should i get the skv2 2500 1d |
| Answer: | I currently run six on just 2 channels. Pay attention to the ohm load and properly set gains with a multimeter prior to playing. |
Skar Audio SKA7EQ 7 Band 1/2 DIN Pre-Amp Car Audio Graphic Equalizer with Aux Input and High Voltage RCA Outputs
Skar Audio
Product description
Skar Audio engineered the SKA7EQ 7 band 1/2 DIN car audio graphic equalizer so that you can finally take full control over your car audio listening experience, dialing the sound into perfection. Featuring two sets of RCA inputs (main and a selectable auxiliary input), this EQ takes your input signal and allows you to modify and adjust the sound to your liking. The output signal is then delivered via the high voltage (up to 7V max) pre-amp RCA outputs for the Front, Rear, and Subwoofer channels (the subwoofer out-put channel features an independent volume control knob on the front of the unit as well). 7 fully adjustable -12 dB to +12 dB EQ bands (50 Hz, 125 Hz, 320 Hz, 750 Hz, 2. 2 kHz, 6 kHz, 16 kHz) with built-in fader control.
- 6 Channel 7-Band High Performance Car Audio 1/2 DIN Pre-Amp Electronic Equalizer
- Featuring 2 (Balanced & Selectable) RCA Inputs - Main and Auxiliary (Aux w/ Variable Gain Control) | THD: 0. 005%
- High Voltage (Max Output Voltage - 7V) Gold Plated Pre-Amp RCA Outputs - Front, Rear, and Subwoofer (with Variable Subwoofer Level Control on Front of EQ)
- 7 Fully Adjustable -12 dB to +12 dB EQ Bands (50 Hz, 125 Hz, 320 Hz, 750 Hz, 2. 2 kHz, 6 kHz, 16 kHz) with Built-in Fader Control
- Take Full Control Over Your Car Audio System with this EQ | Signal-to-Noise Ratio: 100 dB, Low Pass Frequency Switch: 60 Hz / 120 Hz
- Includes Installation Mounting Brackets and Hardware | 20 dB Headroom Eliminated Signal Overload
- Included components: Installation Brackets and Hardware
User questions & answers
| Question: | How would you wire this to a head unit that has a front, rear and subwoofer channel? Would you only use the front and rear and toss the other set of r |
| Answer: | So with only one input from the head unit does the eq convert it to front and rear sound? What I mean do you loose the rear sound or does it just double and split the front channel? |
| Question: | Does this product light up |
| Answer: | Yes it lights up blue cleaned up my audio very well |
| Question: | Anyone els experiencing a popping noise when you take key out ignition if so any ideas on how i can stop it? I already tried grounding it to radio |
| Answer: | Had the same issue with ankther brand EQ. Problem went away when I switched the positive from the EQ and attached it to the yellow cable straight to battery not the red to ignition. That should fix it. |
| Question: | How would you do the power wire i see theres one in picture with a fuse but isint that to short |
| Answer: | Hello, No the Red wire with fuse holder is not to short. The longer side of the Red wire goes to the Scar SKA7EQ, On Back of the SKA7EQ is the power, ground, and Remote terminal. The Red wire will be extended with a 14awg wire to your power source. Source could be the car battery, or an Accessory fuse circuit of 10 amps 12volts DC current. Extending this red wire is Normal in the audio installation world. The coupling will be needed to successfully butt the two wires together and crimp both sides, if u like install the double red wire size with Heat Shrink Tubbing, then Couple the wires with the "Butt Connector" , slide the heat shrink over it and heat the heat shrink with a Heat Gun, or powerfully hair dryer, then run the Red wire to the Accessory, or Battery positive Red Terminal. The same thing for the ground wire, black wire has no fuse in line so Run from your battery Negative Terminal Black, to the Scar SKA7EQ next to the Red wire, and Tighten it down to the SKA7EQ. The Remote wire is "In the business of Audio Installation" Traditionally Blue, Or Purple, Strip 4mm, or 3/8" and Install it into the Scar SKA7EQ at the R terminal, R stands for "Remote" or "Trigger" this Blue, Or Purple wire goes to your amplifier, and at the amplifier you will see a Positive terminal, a Negative Terminal and the R, "Remote" terminal the Blue or Purple Remote wire tightens onto the amp in the R terminal spot. The wire should be all 14 AWG for this. Wiring your amps u should at least use 4awg for both Power and Ground, Directly to the car/boat/atv Battery. Use small spools of OFC Copper, Red Positive, Black Negative, and Blue/Purple Remote from amazon, You have to have Amplifiers in your system to use the SKA7EQ. Get an Amplifier install kit, plus the three spools of 20ft of 14 AWG Red, Black, Blue from amazon....Good Luck. |
Skar Audio Dual 12" Complete 2,400 Watt SDR Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
Skar Audio
Product description
Skar Audio created this custom loaded enclosure package to deliver powerful, deep, and tight bass in an all-in-one competition-grade system. This package features two, 12-inch, dual 4-ohm, Skar Audio SDR Series subwoofers, which are pre-loaded and wired up inside of a custom dual 12" ported enclosure. Next, we pair the loaded enclosure of this package with the Skar Audio RP-1200.1D Class D mono-block amplifier, the perfect amplifier to power your new system and matched for perfect compatibility and power handling with the included subwoofers. Finally, we include a premium Skar Audio 4 Gauge OFC premium amplifier wiring kit to install your new system, making installation hassle free. The Skar Audio SDR series of subwoofers were designed to deliver hard hitting, low spectrum sound. Featuring a high flux ferrite motor, these versatile 12-inch woofers are conservatively rated at 1,200 watts max power each. When looking for a system that delivers low end frequencies with authority, look no further. This is the perfect solution for a daily driver that can handle whatever is thrown at it, offering unmatched reliability and sound quality. The enclosure housing the subwoofers features a unique kerf middle port and split chamber woofer design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box. This package was put together by our installation experts to ensure compatibility and allow for an easy installation. We take the guess work out of pairing the components of your system up, and make it easy to get the bass you've always wanted in your ride.
- All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
- Peak Power: 2,400 Watts, RMS Power: 1,200 Watts
- Includes x1 Skar Audio SDR-2X12D4 Dual 12" Loaded 2,400 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio RP-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier
- Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit
User questions & answers
| Question: | Will this fit in a 2017 ford GT |
| Answer: | That one I'm not to sure on. But ford GT, nice... You could stop by and we can check it out...lol. Good luck. |
| Question: | Will this fit in a 2020 hyundai sonata trunk |
| Answer: | It will if your trunk is 40”wide by 20”deep and 16” tall |
| Question: | will it fit in a 2006 altima |
| Answer: | Yes |
| Question: | Will it fit in a 2005 double cab Tacoma |
| Answer: | I would say yes. But will not leave much room at all. |
Skar Audio Dual 10" 2400W Loaded Sdr Series Vented Subwoofer Enclosure | SDR-2X10D4, Dual 10" D4 Loaded Enclosure
Skar Audio
Product description
Skar Audio introduces the SDR-2X10D4 Dual 10-inch loaded Vented subwoofer enclosure to cater to the audiophile who wants a competition grade system in their Vehicle without all of the headache involved with designing it from the ground up. This loaded enclosure features two of our extremely popular SDR-10 D4 1, 200 Watt Max power subwoofers which combined come in at 2, 400 watts Max power for the pair. The woofers come pre-loaded and wired up inside of this custom dual 10" Ported enclosure, which features a unique kerf middle port and split chamber woofer design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box.
this enclosure was engineered by Skar Audio specifically for the woofers that are loaded in it, ensuring perfect sound and compatibility. Every subwoofer is different, and it is so critical when buying woofers to ensure that the woofers and enclosure are an ideal match, or you will lose sound quality and output. With this loaded Subwoofer Enclosure model, All of those concerns are eliminated, making it easier than ever to add powerful aftermarket bass to your vehicle.
- Sdr series dual 10-inch Dual 4-ohm loaded Subwoofer Enclosure
- Peak Power: 2, 400 Watts, RMS power: 1, 200 Watts
- Pre-wired Internally for a 1 Ohm Final Impedance Load at the terminals for an easy installation
- Premium Vented Enclosure Made of 5/8" Mdf and finished in black Carpeting
- Double front baffle (1.25") with countersunk subwoofer design for Flush and attractive appearance
User questions & answers
| Question: | Will this fit a 2004 Ford Mustang |
| Answer: | Yes it should they are pretty compact for being such powerful subs |
| Question: | Will the Rockville db25 push the subs |
| Answer: | Pushing is a bully tactic and will not be tolerated |
| Question: | Will these fit in a 2003 Mitsubishi eclipse |
| Answer: | yes |
| Question: | Will it fit behind third row seat in my 2006 Ford Expedition xlt |
| Answer: | Yes. |
Product features
Product Specifications
- Includes Subwoofer Pre-Loaded Into Subwoofer Enclosure
- Skar Audio SDR-10 D4 - 10" Dual 4 Ohm Subwoofer
- Peak Power: 2,400 Watts (pair) | 1,200 Watts (each)
- RMS Power: 1,200 Watts (pair) | 600 Watts (each)
- Frequency Response: 30 - 300 Hz
- 2.5" High Temperature Copper Voice Coil
Skar Audio SDR-12 D2 12" 1200 Watt Max Power Dual 2 Ohm Car Subwoofer
Skar Audio
Product description
The Skar Audio SDR-12 D2 12" Dual 2-ohm subwoofer was engineered to dish out reliable, hard hitting, and low spectrum sound. Featuring a high flux ferrite motor, This woofer will provide extreme power handling for extended periods of time. The SDR series will quickly become a customer favorite, as it's perfect for people just entering the world of car audio all the way up to seasoned pros. The SDR-12 Dual 2-ohm 12-inch car subwoofer features a 2.5” high temperature 4-layer high temperature copper voice coil that is attached to our Skar Audio signature red spider. The surround on the SDR series is a high roll foam surround which allows the woofer to produce riveting low end bass response. The SDR series has a max power rating of 1, 200 watts and a RMS power rating of 600 watts. Sensitivity (SPL): 84.7 dB, mix: 13.5mm one-way, Fs: 32 Hz, frequency response: 22 Hz- 300 Hz, mounting depth: 7.62".
- 12-Inch Dual 2-ohm Car Subwoofer
- Peak Power: 1,200 Watts | RMS Power: 600 Watts
- 2.5" 4-Layer High Temperature Copper voice Coil | Fs: 32 Hz
- High Roll Foam Surround and Competition Grade Pressed Paper Cone
- Powerful High Flux Ferrite Motor | Advanced Air Flow Cooling Design
- Frequency Response Range: 22 Hz - 300 Hz | Sensitivity: 84.7 dB
User questions & answers
| Question: | can I use them with a 600w power in a subwoofer box for ram |
| Answer: | If you have strong electrical they will run .5 ohm all day long. |
| Question: | Does this sub still sound good with 500 watts RMS at 2 ohm load |
| Answer: | Make sure you take a look at the spec for a 4 ohm configuration. That amp at 4 ohm would only put out around 500vl watts. |
| Question: | Can these handle 800watts rms |
| Answer: | Yes |
| Question: | Can I put the 1200w monoblock scar amp full blast with 2 of these |
| Answer: | Both and school work. The 1500 will just be a comfortable amount of power but if you want to really drive your sub go with the bigger version. |
Product features
Technical Specifications
- Dual 2 Ohm Voice Coil Configuration
- Peak Power: 1200 Watts
- RMS Power: 600 Watts
- Competition Grade Pressed Paper Cone
- 2.5" High Temperature Copper Voice Coil
- Frequency Response: 22 Hz - 300 Hz
- Sensitivity: 84.7 dB
- Xmax: 13.5 mm
- Mounting Depth: 6.47"
Skar Audio DNR-15 D2
The Skar Audio SDR series was engineered to dish out reliable, hard hitting, and low spectrum sound. Featuring a high flux ferrite motor, this woofer will provide extreme power handling for extended periods of time. The SDR series will quickly become a customer favorite, as it's perfect for people just entering the world of car audio all the way up to seasoned pros.
The SDR series features a 2.5” high temperature 4-layer high temperature copper voice coil that is attached to our Skar Audio signature red spider. The surround on the SDR series is a high roll foam surround which allows the woofer to produce riveting low end bass response. The SDR series has a max power rating of 1,200 watts and a RMS power rating of 600 watts.
Skar Audio 8 Gauge OFC Complete Amplifier Installation Wiring Kit, SKAR8MANL-OFC
Product description
Scar Audio designed the SKAR8MANL-OFC 8 Gauge, 99.99% Oxygen Free Copper, premium wiring kit to deliver unrivaled amounts of power and performance when installing your amplifier. This 8 gauge wiring kit is great for powering systems up to 800 watts, and will allow your amplifier to perform at its full potential.
- 4 Gauge 99.99% Oxygen Free Copper Complete Amplifier Wiring Installation Kit
- Great for Installing Systems up to 800 Watts
- 17 Ft - 8 Gauge OFC Matte Blue Max-Flex Power Cable
- 3 Ft - 8 Gauge OFC Matte White Max-Flex Ground Cable
- In-Line Mini-ANL Fuse Holder and 60 Amp Mini-ANL Fuse Included
- Includes 17 Foot 2-Channel Twisted Pair RCA Interconnects & 20 Ft of 18-Gauge OFC Speaker Wire
- Includes 17 Ft Blue Remote Turn-On Wire & Other Installation Accessories (Spade Terminals, Zip Ties, etc)
User questions & answers
| Question: | Will this kit be good on a 4 channel 3200 watt amp |
| Answer: | Yes but you won't get the full power out the speaker |
| Question: | What guage is the remote wire |
| Answer: | Mine sounds great at 1000 watts |
| Question: | Do the eyelets come pre crimped |
| Answer: | I am running my single 12 on a 1500 watt audiopipe @ 4ohms. Ive maxed out bass boost and gain with no distortion after breaking it in. It hits hard. Hard enough for me. So I'm guessing it can take more abuse than I'm giving it |
| Question: | Will this power a 2500 watt amp |
| Answer: | Full blast? The amp gain aint a volume knob. But it should do fine |
Product features
Product Specifications
- 17 ft. of 8 Gauge OFC Matte Blue Ultra Flexible Power Cable
- 3 ft. of 8 Gauge OFC Matte White Ultra Flexible Ground Cable
- 17 ft. Matte Blue OFC Remote Turn-on Wire
- 17 ft 2-Channel Twisted Pair RCA Interconnect Cable
- 20 ft. 18 Gauge Matte Blue/White Multi-stranded OFC Speaker Wire
- 3 ft. of Black Flex Wire Loom Included
- Mini-ANL Fuse Holder With 60 Amp Mini-ANL Fuse
Skar Audio VD-12 D2 12" 800W Max Power Dual 2 Ohm Shallow Mount Car Subwoofer
Skar Audio
Product description
The Skar Audio VD-12 D2 is a 12-inch, dual 2-ohm, shallow mount car subwoofer. This woofer was engineered to sound great and handle ample amounts of power all while maintaining a shallow foot print, which allows them to be very versatile in use. This driver utilizes a high temperature 2-inch voice coil, which in conjunction with it's powerful, yet low profile single stack ferrite magnet, allow it to perform with dominance. The VD series make for a great under seat subwoofer or for use in applications where mounting depth is limited. 12-inch car subwoofer. Dual 2 ohm voice coil. Max power: 800 Watts. RMS Power: 500 Watts. Fs: 35.3 Hz, Spl: 86.7 dB. Mounting Depth: 4.92"
- 12-Inch Dual 2 ohm Shallow Mount Subwoofer
- Peak Power: 800 Watts | RMS Power: 500 Watts
- Shallow Mount Design - Mounting Depth: 4.92"
- High Performance Pressed Paper Cone Stitched to Premium Foam Surround
- Sensitivity: 86.7 dB | Fs: 35.3 Hz
- Frequency Response: 25 Hz - 300 Hz
User questions & answers
| Question: | Can I run 2 12 vd -12 d4 can they handle a 1ohm loaf if I wore it that way |
| Answer: | Well, if you want to drop them to a 2ohm load, you'll need to of them with dual 4ohm voice coils. You should probably counsolt your local car audio professional before attempting. But all the VD subwoofers can handle a 1ohm load |
| Question: | I have a 1100wat boss audio amp will it power 2 of these 2 Ohm 12s |
| Answer: | Man I never ever heard of tht amp |
| Question: | What do y’all recommend to put behind a 1999 ram single cab |
| Answer: | I would go with 8" skar, they do hit hard, if you want to hit lows in rap music go with 12s |
| Question: | What if my amp is only 500 watts max power. will it still power the subwoofer |
| Answer: | Do not listen to anyone who says you can damage a speaker by "under-powering" it. If you are listening to music at very low volumes you are not damaging your equipment and are only sending a couple of Watts or less to the drivers. Driver damage comes from trying to pull more power from your amp than it can safely deliver driving it to clipping the output signal (assuming the input signal is not already clipped). So yes your 500 Watt max power (Likely 250 Watts RMS) will still power the speaker just fine, it just might not get as loud as you'd like. |
Product features
Technical Specifications
- Dual 2 Ohm Voice Coil Configuration
- Peak Power: 800 Watts
- RMS Power: 500 Watts
- Pressed Paper Cone
- High Roll Foam Surround
- 2" High Temperature Copper Voice Coil
- Frequency Response: 25 - 300 Hz
- Sensitivity: 86.7 dB
- Xmax: 11 mm
- Mounting Depth: 4.92"
Skar Audio Single 12" Complete 1,200 Watt SDR Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
Skar Audio
Product description
Skar Audio designed the SDR-1X12D2 loaded subwoofer enclosure package for those who seek ultimate performance in subwoofer-bass fidelity. This package offers a simplified option to add a competition-grade subwoofer system, without the guesswork involved in designing it from scratch. The custom enclosure features one, SDR-12 D2 subwoofer, which is pre-loaded and wired up inside of a custom single 12" vented enclosure. We also include the perfect amplifier in this package to power your new subwoofer with the Skar Audio RP-800.1D, which comes with a premium 4 gauge amplifier wiring kit to make installing the amplifier hassle free. This custom enclosure used in this package was engineered by Skar Audio specifically for the subwoofer that is loaded in it, ensuring perfect sound and compatibility. Every subwoofer is different, and it is so critical when buying a subwoofer to ensure that the subwoofer and enclosure are an ideal match, or you will lose sound quality and output. The enclosure features a unique kerf port design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box. The subwoofer comes pre-wired and loaded inside of the enclosure allowing for an easy and hassle free installation. The dual 2-ohm woofer is wired up inside of the enclosure so that the final impedance load is configured for 1-ohm at the terminals.
- All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
- Peak Power: 1,200 Watts, RMS Power: 600 Watts
- Includes x1 Skar Audio SDR-1X12D2 Single 12" Loaded 1,200 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio RP-800.1D Class D 800 Watt Monoblock Amplifier
- Includes x1 Skar Audio SKAR4ANL-CCA 4 Gauge Complete Amplifier Wiring Kit
User questions & answers
| Question: | Would this fit somewhere in my 2004 Chevy Silverado 2500hd duramax without taking up more than one seat |
| Answer: | Yes |
| Question: | How many channels does the amp have |
| Answer: | I’d say anywhere for 18 to 20 gauge it’s very thin but haven’t had a problem with this kit |
| Question: | Does this include a remote subwoofer volume control |
| Answer: | No, you have to have a large gauge crimper. |
| Question: | Does this fit in my 2015 Honda Accord |
| Answer: | I know this post is from 2 months ago. But you need to figure everything in RMS wattage. Not Peak. I have a SKAR 1200.1. 1200 watts RMS but it hits abt 2500 peak on the amp Dyno@1ohm. This kit is adequate for my setup. This kit is OFC. 2500 watts RMS no but if your amp is 2500 peak. Yes this is enough. Also depends if your amp is class B or a Class D amp. Class D Amps are abt 75% efficient Total RMS wattage divided by 0.75 then divided by 13.8 gives your total current draw of your amp. If you have a class A/B change that number to 0.50 and do the same calculation. A good rule of thumb. Take the fuse ratings on your amp and add them up. Multiply by 10 and that’s usually your real RMS not what is advertised on the amp. If it has no onboard fuse the owners manual will tell you the recommended fuse size and multiply that by 10. I’d say this 17 foot kit would be fine 1200-1500 Watts RMS. If it’s closer to 1500 watts just buy a 150 AMP fuse for this kit on amazon for 4-5$ and you should be good. Always rake distance into account too. 16-18ft of 4 gauge OFC is fine. But if you go over 18ft you need 2 gauge or 0 gauge. |
Skar Audio 4 Gauge CCA Complete Amplifier Installation Wiring Kit, SKAR4ANL-CCA
Product description
Skar Audio designed the SKAR4ANL-CCA 4 gauge, performance Series, premium wiring kit To deliver optimal performance when installing your amplifier. This 4 gauge wiring kit is great for powering systems up to 1, 200 watts and includes an ANL style fuse Holder and 100 amp ANL fuse.
- 4 Gauge CCA Complete Amplifier Wiring Installation Kit
- Great for Installing Systems up to 1, 200 Watts - Includes 2-channel RCA Interconnect Cable
- 17 Ft - 4 Gauge CCA Matte Blue Max-flex Power Cable
- 3 Ft - 4 Gauge CCA Matte Brown Max-flex Ground Cable
- In-line ANL Fuse Holder and 100 Amp ANL Fuse Included
- Includes 20 Ft of 16 Gauge Matte Blue Multi-strand Speaker Wire
- Installation Accessories (ring terminals, spade Terminals, zip ties, etc) Also included
User questions & answers
| Question: | Can i use speaker wore for the remote turn on |
| Answer: | Mono |
| Question: | Is it copper |
| Answer: | Yes |
| Question: | Are the ring terminals already on the wire |
| Answer: | Yes we have it in a Nissan Altima. |
Product features
Product Specifications
- 17 ft. of 4 Gauge CCA Matte Blue Ultra Flexible Power Cable
- 3 ft. of 4 Gauge CCA Matte Brown Ultra Flexible Ground Cable
- 17 ft. Blue Multi-Strand Remote Turn-On Wire
- 17 ft 2-Channel Twisted Pair RCA Interconnect Cable
- 20 ft. 16 Gauge Matte Blue/White Multi-stranded OFC Speaker Wire
- ANL Fuse Holder With 100 Amp ANL Fuse
Skar Audio SK-M9005D Compact Full-Range Class D 5 Channel Car Amplifier, 900W
Product description
The Scar Audio SK-M9005D full-range five channel amplifier offers high performance from an ultra-compact chassis. This Class D amplifier uses less power, takes up less space, and generates less heat than traditional amp designs, making it the perfect solution when space is at a premium and sound quality is the ultimate goal. Don't let its size fool you, the SK-M9005D boasts an impressive 900 Watts of RMS power output (continuous), providing the versatility to power multiple sets of speakers as well as a subwoofer in your system. The SK-M9005D provides you with the tone controls you need to tune your system so that your speakers and sub sound their best. Utilizing the high-pass filters, you can remove the extreme low bass from your full-range speakers, so they'll play more efficiently. You can adjust the subwoofer channel's low-pass filter and bass boost to get just the right bass tone. This five channel amplifier comes with a remote bass knob and cable, providing the ability to control the bass from the dash. In addition, the SK-M9005D utilizes an adapter harness for the speaker outputs allowing for an easier installation. Utilizes 8 Gauge Power and Ground Input Terminals. RMS Power @ 2 Ohms: 85 Watts x 4 + 450 Watts x 1 (14. 4v), Frequency Response: 10Hz - 20kHz for CH 1-4 & 10Hz - 500Hz for CH 5, Crossover Control: HPF / Full-Range / LPF. 4-Way Protection Circuitry Built-in (Thermal, Voltage, Speaker, DC), Remote Bass Knob and Cable Included. Amplifier's Physical Dimensions: 12. 4 in x 4. 6 in x 1. 7 in (L x W x H)
- Ultra Compact MOSFET 5-Channel Class D Car Amplifier
- RMS Power @ 2 Ohm: 85 Watts x 4 + 450 Watts x 1 (14. 4v)
- Frequency Response: 10Hz - 20kHz for CH 1-4 & 10Hz - 500Hz for CH 5
- Crossover Control: HPF / Full-Range / LPF | Built In 4-Way Protection Circuitry
- Remote Bass Knob/Cable and Speaker Output Adapter Harness Included
User questions & answers
| Question: | How's this for an infinity based sq setup? plan on getting kappa i plan on getting kappa 6x8's and a pair of low-profile 10-12" reference subs |
| Answer: | Yes you can if you seperate the wire down to 1 wire. Dont double twist them. |
| Question: | What is the continues power out the sub channel |
| Answer: | No, it is not ofc (oxygen free copper) it is the cheaper CCA (coper clad aluminum) if your pushing any really power I would advise getting a OFC kit |
| Question: | can I strap another amp to my room 4500 and run 2 6.5 inch subs off that if so which amp they are Skar Audio woofers |
| Answer: | Just like the picture. Power and ground have ring terminals on one side only. |
| Question: | When using hpf mode does that only filter channels 1-4 to block low frequencies, and leave channel 5 to have its 10-500hz full range still |
| Answer: | It will fit |
Skar Audio Dual 10" Complete 2,400 Watt SDR Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
Skar Audio
Product description
Skar Audio created this custom loaded enclosure package to deliver powerful, deep, and tight bass in an all-in-one competition-grade system. This package features two, 10-inch, dual 4-ohm, Skar Audio SDR Series subwoofers, which are pre-loaded and wired up inside of a custom dual 10" ported enclosure. Next, we pair the loaded enclosure of this package with the Skar Audio RP-1200.1D Class D mono-block amplifier, the perfect amplifier to power your new system and matched for perfect compatibility and power handling with the included subwoofers. Finally, we include a premium Skar Audio 4 Gauge OFC premium amplifier wiring kit to install your new system, making installation hassle free. The Skar Audio SDR series of subwoofers were designed to deliver hard hitting, low spectrum sound. Featuring a high flux ferrite motor, these versatile 10-inch woofers are conservatively rated at 1,200 watts max power each. When looking for a system that delivers low end frequencies with authority, look no further. This is the perfect solution for a daily driver that can handle whatever is thrown at it, offering unmatched reliability and sound quality. The enclosure housing the subwoofers features a unique kerf middle port and split chamber woofer design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box. This package was put together by our installation experts to ensure compatibility and allow for an easy installation. We take the guess work out of pairing the components of your system up, and make it easy to get the bass you've always wanted in your ride.
- All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
- Peak Power: 2,400 Watts
- RMS Power: 1,200 Watts
- Includes x1 Skar Audio SDR-2X10D4 Dual 10" Loaded 2,400 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio RP-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier
User questions & answers
| Question: | Do i need a second battery for this amp |
| Answer: | [email protected] they have been a great help to me will respond within 24 hours M-F |
| Question: | Does this come with a base adjustment knob |
| Answer: | Yes hp on works on the channel you switch it to channel 5 shouldn’t have that option |
Skar Audio Single 8" Complete 700 Watt SDR Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
Skar Audio
Product description
Skar Audio designed this complete loaded subwoofer enclosure bass package for those who seek ultimate performance in subwoofer-bass fidelity. This package offers a simplified option to add a competition-grade subwoofer system, without the guesswork involved in designing it from scratch. The custom package features a loaded SDR series 8" ported subwoofer enclosure (SDR-1X8D2), 350 watt class D monoblock amplifier to drive the woofer (RP-350.1D), and a 4 gauge amplifier wiring kit to install your new system. The enclosure features a unique kerf style port, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box. This enclosure was engineered by Skar Audio specifically for the subwoofer that is loaded in it, ensuring perfect sound and compatibility. Every woofer is different, and it is so critical when buying a subwoofer to ensure that the woofer and enclosure are an ideal match, or you will lose sound quality and output. With this loaded subwoofer enclosure model, all of those concerns are eliminated, making it easier than ever to add powerful aftermarket bass to your vehicle. This package was put together by our install experts to ensure compatibility and allow for an easy installation. We take the guess work out of pairing the components of your system up, and make it easy to get the bass you've always wanted in your ride.
- All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
- Peak Power: 700 Watts, RMS Power: 350 Watts
- Includes x1 Skar Audio SDR-1X8D2 Single 8" Loaded 700 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio RP-350.1D Class D 350 Watt Mono-block Amplifier
- Includes x1 Skar Audio SKAR4ANL-CCA 4 Gauge Complete Amplifier Wiring Kit
User questions & answers
| Question: | Does the amp come with bass knob |
| Answer: | Should be fine I ran it for a sq set up with 4 6.5s and single Jl woofer and did great |
| Question: | Will this fit in the subwoofer compartment of my 2002 Chevy suburban |
| Answer: | Not sure but it is perfect for a good all around system in your car or truck |
Latest Reviews
View all
Logitech Xbox Controller
- Updated: 06.02.2023
- Read reviews
One Week Cleanse
- Updated: 03.02.2023
- Read reviews
Organic Tampon
- Updated: 09.02.2023
- Read reviews
Charbroil Stainless Steel Grill
- Updated: 10.03.2023
- Read reviews
Copper Socks For Men
- Updated: 12.06.2023
- Read reviews