8 best power acoustik car woofers
Power Acoustik is a well-known brand in the field of car audio and electronics, including car subwoofers. They offer a range of car woofers designed to enhance the bass performance of your car's audio system. Here's what you need to know about Power Acoustik car woofers:
Component Subwoofers: Power Acoustik produces component subwoofers, which are individual subwoofer speakers designed to reproduce low-frequency sounds with exceptional clarity and power. These component subwoofers are typically available in various sizes, including 10-inch, 12-inch, and 15-inch options.
Power Handling: Power Acoustik car woofers come with different power handling capabilities, which indicate the amount of power (in watts) they can handle. It's essential to match the subwoofer's power handling with the amplifier's output to ensure optimal performance and prevent damage.
Voice Coil Configuration: These subwoofers often feature dual voice coil configurations.Dual voice coils provide more wiring options and flexibility when connecting them to amplifiers, allowing for different impedance settings and wiring configurations.
Cone Material: The cone material used in Power Acoustik subwoofers is typically designed for durability and enhanced bass response. Materials like polypropylene or composite are commonly used for their ability to produce deep and clear bass tones.
Sensitivity: Sensitivity measures how efficiently a subwoofer converts power into sound. Power Acoustik subwoofers often have a sensitivity rating that helps determine how much power is required to produce a certain volume level. Higher sensitivity subwoofers require less power for the same output.
Enclosure Type: To maximize the performance of Power Acoustik car woofers, it's important to install them in the appropriate type of enclosure. These can be used in sealed, ported, or bandpass enclosures, depending on your audio preferences and available space.
Installation: Proper installation is crucial for getting the best performance from Power Acoustik car woofers. This includes securing the subwoofer in the enclosure, connecting it to the amplifier with the correct wiring, and tuning the audio system for optimal bass response.
Warranty: Power Acoustik often provides warranties for their products, which can vary depending on the specific model and retailer. It's essential to check the warranty terms when purchasing their car woofers.
Compatibility: Power Acoustik subwoofers are designed to work with a wide range of car audio systems. However, it's important to ensure that they are compatible with your vehicle and amplifier before making a purchase.
Price Range: The price of Power Acoustik car woofers can vary depending on the model and features. They offer options for different budget levels, making it possible for a wide range of consumers to enjoy enhanced bass in their car audio systems.
Power Acoustik car woofers are designed to provide car audio enthusiasts with a reliable and powerful bass solution. They offer various options to suit different preferences and budgets, and their reputation in the car audio industry makes them a popular choice for those looking to upgrade their car's audio system with enhanced bass performance.
Below you can find our editor's choice of the best power acoustik car woofers on the market
Power Acoustik BAMF-122 Bumper-122 Car Audio Subwoofer 3500 Watts with 12-Inch Dual Suspension (2 Pack)
Product description
Make your car audio sound the best it can be with the Power Acoustik BAMF-122 Bumper-122 Subwoofer 3500 Watts with 12" Dual Suspension. This package includes 2 subwoofers. BAMF subwoofers are the newest secret weapon for you bass BURP fanatics. These beasts are engineered for the most extreme conditions. Massive 3” 4-layer voice coils built on an aluminum former can take the heat. Freakishly oversized motor structures provide more magnetic inertia than is ever necessary for a woofer. Spruce tree pulp cones, high density extended excursion foam surround, and hybrid suspension dampers work together to contain the momentum to a shattering roar. All in all, this powerful subwoofer is the only thing standing between you and a fantastic sounding ride. Take your ride to the next level with the Power Acoustik BAMF-122 Bumper-122 Subwoofer 3500 Watts with 12" Dual Suspension.
- POWERFUL SUBWOOFER: 3500-watt subwoofer with an overcompensating motor structure for increased magnetic strength; Includes 2 subwoofers
- LOW FREQUENCY: 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics
- NO MORE HEAT BUILD-UP: Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up
- DURABLE FRAME: Non-Magnetic Non-Resonate Die-Cast Aluminum Frame
- BIG-TIME SOUND: 3” 4-Layer Voice Coil w/ Direct Connect Wire Increases Power Handling
Power Acoustik MOFO-104X 10" Dual 4 Ω 1200W RMS Subwoofer
Power Acoustik
Product description
MOFO X subwoofers are refined and increase efficiency dramatically! MOFO-X subs use a composite sandwich cone with a polypropylene surface for durability and Spruce pulp backing for smooth low bass. Like the original MOFOs, the new models still use an aluminum dust cap that couples to the voice coil former and extends over the cone. Why? The fins brace the cone and eliminate cone flex during high excursion. And since they are aluminum and couple to the voice coil, they act as a heatsink or heat extractor. Using the latest materials, the new MOFO subs yield superior performance. Cast aluminum baskets? Of course! Increased bottom octave output? You Bet! Louder than the original design? Duh.
- Overcompensating Motor Structure for Increased Magnetic Strength
- 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics
- Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up
User questions & answers
| Question: | would these babies hit hard with a 3000 watt planet audio mono block amp |
| Answer: | Yes and it fits neatly BTW the fridge and stove bc it's so narrow |
| Question: | Good amp to push this sub |
| Answer: | Yes, the shelves can be placed at different heights. It is wherever you place the clips is where the shelf will stay. |
| Question: | Q: I have a 1200 watt amp would it work with it |
| Answer: | The bottom shelf is large enough for a 12x12” paper. The two top shelves are a bit smaller. |
| Question: | Can this be wired to be wired down to two ohms |
| Answer: | It comes with white and black. Yes measurements include wheels |
| Question: | What’s the best box to get for 2 power acoustik bamf |
| Answer: | Yes, just be mindful of how hot the stove gets and what's in the bins |
| Question: | what happens if i just wire one voice coil |
| Answer: | No, currently we only have this item in black. |
| Question: | Will this work in a vented box with 2.3 cubic feet of volume |
| Answer: | The distance between the baskets can be changed so that you can use them for small and large items. |
| Question: | Dual 2ohm or dual 4 ohm voice coils |
| Answer: | I was missing peices and the manufacturer offered to send me a full refund. |
| Question: | How big is it |
| Answer: | Here are the 3 shelves inner dimensions: 375*295*85mm 380*300*85mm 385*305*85mm Please use this as a reference. |
| Question: | Titanic RC model do you ship to Australia |
| Answer: | go to the sellers page and tell them.... I had no problem w/ my order, and I love the little roll around shelves My box came damaged but shelf but nothing was broke. tell them you NEED the rest of the parts before you leave a comment/rating.... other wise take a leg part with you and look at homedepot, or..... |
| Question: | Is there anyway for me to order another rc controller I can't seem to find mines |
| Answer: | That might have been a discounted price for prime members. I'm not sure because it has been a while since I have had mine. I'm just guessing. |
| Question: | I have a frozen starboad shaft, need help on how you open up deck from hull |
| Answer: | approximately 10 inches between, including a 2 inch lip |
POWER ACOUSTIK MOFO-122X 12" 2700W Car Power Subwoofer Woofer Sub MOFO122X
Power Acoustik
Product description
MOFO X subwoofers are refined and increase efficiency dramatically. MOFO-X subs use a composite sandwich cone with a polypropylene surface for durability and Spruce pulp backing for smooth low bass. Like the original MOFOs, the new models still use an aluminum dust cap that couples to the voice coil former and extends over the cone. The fins brace the cone and eliminate cone flex during high excursion. And since they are aluminum and couple to the voice coil, they act as a heatsink or heat extractor. Using the latest materials, the new MOFO subs yield superior performance.
- Royal Blue Finish w/ Diamond Cut Accents
User questions & answers
| Question: | What is a solid amp to power 2 of these |
| Answer: | As long as its the same number of megahertz (MHz) as the boat, it should work, even a remote for a car would work, again obviously if it has the same number of MHz's, you should be fine. |
| Question: | does this come with 2 subs |
| Answer: | Sorry don't know how to open it. We just added oil to the shaft. We were disappointed with its performance. It wasn't worth the money. |
| Question: | how many cu.ft do i need if i want to get a ported box |
| Answer: | The shark body starts "listening" to the remote control when the two tiny metal dots along its left flank are touching water (or lick your finger and touch them both). With batteries in the remote, the "tail fin" will "listen" to the directions of the remote. |
| Question: | Will this sub fit in a dodge fox box mounting depth is no more than 7 inches |
| Answer: | It is daily waterproof. Please don't put it into the water. Thanks. |
| Question: | What is the Best box for this subwoofer single bamf |
| Answer: | It will fit long wise but not sideways |
| Question: | Whats better mofos or the bamf |
| Answer: | You can fit approx 5 3/4” wide container in it. I wouldn’t recommend it at all. It’s poor quality. The wheels don’t work right, so it doesn’t move smoothly. |
| Question: | What is the mounting depth |
| Answer: | It is made of steel and it is not suggested to go next to a hot stove. |
Power Acoustik 12" Woofer Dual 4 Ohm 2500W Max
Power Acoustik
Product description
2500 Watts Max
1200 Watts RMS
4 Ohm Dual VC
254 oz. magnet
Efficiency (1w/1m): 86.5
Optimum sealed: 1.25 cu. ft.
Optimum ported: 2.50 cu. ft.
Mounting depth: 7-1/2"e;
Formed steel framework basket
Overcompensating Motor Sturcture for Increased Magnetic Strength
10 mm T-Yoke & Top Plate Improve Low Frequency Dynamics
Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up
Dust Cap Absorbs Voice Coil Heat
Aluminum Dust Cap Fins Dissipate Heat & Strengthen Cone
2.5"e; 4-Layer Voice Coil w/ Large Gauge Wire Increases Power
High-Temperature Tollerance Adhesives Resist Thermal Failure
Nickel Plated 8ga Spring-Loaed Compression Wire Terminals
Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection
High Density Polyether Foam Surround w/ UV & Chemical Protection
Dual Poly-Cotton Suspension Dampen Violent Accelerations
Stitched Voice Coil Leads Prevent Potential Damage
1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included
- Sold as 1 Each.
- 12". 2,500W max. 1,200W RMS. Dual 4 ohm.
- Overcompensating motor structure for increased magnetic strength. 10mm T-yoke & top plate improve low frequency dynamics. Vented T-yoke & frame reduces voice coil heat buildup. Die-cast aluminum heat sink dust cap absorbs voice coil heat.
- Aluminum dust cap fins dissipate heat & strengthen cone. 2.5" 4-layer voice coil with large-gauge wire increases power. High-temperature-tolerance adhesives resist thermal failure.
- Nickel-plated 8-gauge spring-loaded compression wire terminals. Nontransfer spruce pulp cone with UV & chemical protection. High-density polyether foam surround with UV & chemical protection.
User questions & answers
| Question: | Are these sold as pairs |
| Answer: | Yes we ship to Australia. |
Power Acoustik MOFOS-10D4 10" Dual 4 Ω 1100W RMS Subwoofer
Power Acoustik
Product description
Power Acoustik MOFOS-10D4 10" Dual 4 Ω 1100W RMS Subwoofer
- Overcompensating Motor Structure for Increased Magnetic Strength
- 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics
- Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up
User questions & answers
| Question: | Can a crunch 1000.2 bridges push this nice in a sealed box |
| Answer: | I'm using a 2000 hifonics Brutus amp. Push them with no problems. |
| Question: | Will power acoustik rz1 2500 D push this sub |
| Answer: | what brand and model? |
| Question: | How many watts and rms is this sub running |
| Answer: | Yes it can. |
| Question: | Will power acoustik rz1 2500 D push this subwoofer |
| Answer: | I've found the skar kerf port single or dual boxes compliments the bamf specs very......tuned to 32 hz. the Dual12 boxe I have sounds dam good. Tune spec for the bamf is 31.1 hz. Go custom want closer. |
| Question: | would 2 mofo 12s sound better than 2 mofo 15s ?? in a chevy lumina |
| Answer: | It’ll play at about half the volume, you just don’t want to over drive that one coil alone if it has 2 |
| Question: | Can I use my Kicker Zx1500.1 on this sub |
| Answer: | Yes, but minimum box vented is 3.0cubic feet |
| Question: | Is it one or to subs |
| Answer: | Dual 4 ohm. The 154 is 15”- 4ohm voice coils. A 152 would be 15”-2ohm coils. |
| Question: | How many oz's is the magnet |
| Answer: | It is 805 mm long x 100 mm wide x 230 mm high to the top of the stacks |
POWER ACOUSTIK BAMF_152 3,800-Watt BAMF Series 15 Dual 2_ Subwoofer Car Accessories
Product description
3,800W max 1,900W RMS; 3 dual 2ohm , 4-layer voice-coil with direct-connect wire; Overcompensating motor structure for increased magnetic strength; 12mm T-yoke & top plate improve low-frequency dynamics; Vented T-yoke & frame reduce voice-coil heat buildup; Nonmagnetic nonresonant die-cast aluminum frame; High-temperature-tolerant adhesives; Nontransfer spruce pulp cone with UV & chemical protection; Stitched & glued surround/cone joints; Extended-excursion polyether foam surround with UV protection; Dual poly-cotton suspension dampens violent accelerations; Stitched voice-coil leads prevent potential damage; 6.5 mounting depth; Includes 1 gasket/trim ring with concealed mounting holes; Each
- NEW
- POWER ACOUSTIK
- POWBAMF152
Power Acoustik New Pair GW3-10 10" 2200W Car Audio Subwoofers 2 Ohm DVC Bass Sub
Power Acoustik
Product description
2 NEW GW310:
- Power Handling:
- Max wattage: 2200W Individually / 4400 Watts Per Pair
- RMS wattage:1000W Individually / 2000 Watts Per Pair
- Impedance: 2 ohms
- Twisted & woven flax fiber cone for ultimate strength and less elasticity
- Extended excursion NBR surround with strong and flexible properties
- Back plate & t-yoke venting which helps dissipate heat from the voice coil
- Overcast stitched cone assembly allowing for superior adhesives and conventional bond between the surround and cone
- 1-1/2" Long 2-1/2" Diameter 100% Oxygen Free Copper voice coil
- 204 oz. magnet motor structure
- Resonance Frequency (Fs): 35.29 Hz
- Top-mount depth: 6"
- Sensitivity: 81.3dB
- Sold as a pair of subwoofers
- 1 Year Warranty
Power Acoustik BAMF‐152 BAMF Series Subwoofer (15", 3,800 Watts max, Dual 2Ω)
Power Acoustik
Product description
Heads-up you bass BURP fanatics! This BAMF Series Subwoofer (15 in., 3,800 Watts max, Dual 2Ω) from Power Acoustik is engineered for the most extreme conditions. Massive 3 in. 4-layer voice coils built on an aluminum former can take the heat. Freakishly oversized motor structures provide more magnetic inertia than is ever necessary for a woofer. Spruce tree pulp cones, high density extended excursion foam surround and hybrid suspension dampers work together to contain the momentum to a shattering roar!
- 3" dual 2Ω, 4-layer voice-coil with direct-connect wire increases power handling
- Overcompensating motor structure for increased magnetic strength
- 12mm T-yoke & top plate improve low-frequency dynamics
- Vented T-yoke & frame reduce voice-coil heat buildup
- Nonmagnetic, nonresonant die-cast aluminum frame
User questions & answers
| Question: | Are these louder than the 5000 watt rockville 2 ohm 15 inch subwoofers |
| Answer: | I got 2 and used a slot ported box .. they really take some power currently have 8000.1 soundstream on them at 2ohm |
| Question: | What are the box specs. For these subs |
| Answer: | Bamf take more wattage but the mofos have a bigger magnet I have both a single 12 mofo in my lexus witch sounds good and 2 12 bamfs dual 4 ohms in my camero and they pound hard hooked up to 2 4000 watt plante audio amps running at 2 ohms. I'll be picking up 2 more bamfs with 2 ohms so I can run at 1 ohm |
| Question: | will this sub handle 3000.1 tara amp at 1ohm |
| Answer: | just to update this.. I bought this sub its big, 6 3/4" almost 7" depth |
| Question: | Can this sub handle 1 ohm |
| Answer: | I have a planet audio 5000 and I have it set half way so yes it would |
Latest Reviews
View all
Sound Bars Prices
- Updated: 07.02.2023
- Read reviews
Hardware Outdoor Brad Nailers
- Updated: 19.05.2023
- Read reviews
Pcmd Home Cinema Projectors
- Updated: 25.06.2023
- Read reviews
Woman Shirt
- Updated: 02.03.2023
- Read reviews
Hqrp Microwave Ovens
- Updated: 08.02.2023
- Read reviews