14 best pioneer amplifiers

Product description

Class D 1-Channel Marine Mono Amplifier

• mono marine subwoofer amplifier
• 300 watts RMS x 1 at 4 ohms 500 watts RMS x 1 at 2 ohms 800 watts RMS x 1 at 1 ohm
• CTA-2006 compliant frequency response: 10-240 Hz variable low-pass filter (40-240 Hz, 12 dB/octave) selectable subsonic filter (30 Hz, 24 dB/octave)
• conformal coated circuit boards rubber covers protect side panel controls, RCA terminals, and fuses preamp and speaker-level inputs wiring and hardware not included with amplifier 4-gauge power and ground leads recommended fuse rating: 40A x 2
• dimensions: 9-7/8"W x 2-3/8"H x 8-1/2"D

Product description

An amplifier shouldn’t take up too much space, especially in your car. This Class-D amp might just be what you’re looking for. It combines a 1-Ohm stable circuit, installation flexibility and a superior high-power output.

• 4 channel Amplifier
• Wattage RMS (4Ω <=1% THD+N) 4 x 130W
• Wattage RMS (2Ω <=1% THD+N) 4 x 200W
• 302 x 215 x 60 (mm)
• 1600W combined Max power

Product description

The innovative shape of the enclosure is designed for high rigidity and to reduce internal standing waves while also increasing installation flexibility. Can be installed freely in the cabin or under seats and re-positioned with the subwoofer firing rear, front or upwards for optimal bass tuning. The enclosure is fully carpeted, creating a non-slip, durable and scratch resistant surface.

• 1, 200W Max. 300W Nom. Power (Sub)
• 600W Max. 300W Nom. Power (Amp)
• Sealed Enclosure Design
• Designed for Easy Installation Under the Seat
• Dimensions: 21" x 11-3/4" x 5-7/8"

Product description

Drive up your music vibes with the Planet Audio Anarchy AC1200.4 4-Channel  Class A/B Full Range Amplifier. This powerful 2-Ohm stable Amplifier features 1200 Watts Max Power with a MOSFET power supply for clean, strong sound. Customize the sound with Variable Low Pass Crossover, Fixed High Pass Crossover and Bass Boost. Bridge channels for more power and flexibility. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Revolutionize your audio experience with the Planet Audio AC1200.4.



For more product details, please scroll down.

• 1200 W MAX Power, 4 Channel 225 W X 4 RMS @ 2 ohm 113 W X 4 RMS @ 4 ohm 450 W X 2 RMS Bridged @ 4 ohm
• Full Range Class A/B, MOSFET Power Supply
• High and Low Level Inputs
• Fixed High Pass Crossover, Variable Low Pass Crossover, Variable Bass Boost.6 Year Platinum Dealer Warranty
• Frequency Response:20 Hz to 20 kHz ±1 dB

User questions & answers

Question:	Would this amp push 4 eminence alpha 6a? these are 100w rms at 8ohms. how should i connect it
Answer:	Yes it can but it has room for more power. 3200 watt total. Even if that amp was 2000 rms it still could handle more power
Question:	Can I connect 4x 2-ohm speakers to each channel, then connect 2x 4-ohm subs bridged on 1&2, and
Answer:	You can find grills for just about any sub but Skar does not make grills
Question:	Will this amp push 6 door speakers in my Kia Optima
Answer:	Yes break in your subs at a low power for several hours before you attempt to throw full power at them if you don't break them in just right then the dependability and the durability goes out the window. I learned that the hard way with some really expensive JL's. And I just got some scar audio stuff myself and love it but I'm not sure if my amp works with my sub either so I'm just going to break it in and then C after that and the someone here can help me
Question:	Will this amp be good for 6 6x9's
Answer:	If you’re running a single sub then a dual two will give you a one ohm load when wired in parallel and if you’re running a pair of subs the dual 4 version will give you a One ohm load wired in parallel.

Product description

Pioneer TS-WX1210A 12" Sealed enclosure active subwoofer with built-in amplifier

• 1300W Max Single 12" Sealed Subwoofer Enclosure with Built-In Amplifier Power Handling Peak 1300W / RMS 350W Preloaded with a single 12" Subwoofer Built-in Class D amplifier Sealed enclosure with carpet
• Subwoofer Features Cellulose fiber cone Urethane surround Frequency Response 20 - 125 Sensitivity 114dB
• Amplifier Features Class D amplifier Cross Overs 0-12dB Bass Boost Remote knob included
• Enclosure Features Carpet finish

User questions & answers

Question:	Can you connect two of them together
Answer:	No, the angle of the rack can not be adjusted for different seat post angles. The rack has a fixed angle... but I have not found that to be a problem.
Question:	The harness question. What is for yellow? And what is for the black? And what is it for the single wire blue for
Answer:	That's a huge no. Would not recommend the v type for any full suspension bike.
Question:	How to hook up 2 of them
Answer:	This mounts on the seat post, should work on any bike (not sure if it will on a foldable one). The great thing about amazon, if you buy and if it doesn't work you can return it!
Question:	Is it easy to install? Or require it to be professionally installed? Have all the things needed to be installed
Answer:	Topeak makes three styles.

Product features

Pioneer TS-WX1210A 12" Sealed enclosure active subwoofer with built-in amplifier

Built with high bandwidth, high output and low distortion 300-watt Class D amplifier mated to high sensitivity woofers specifically optimized for use in small, sealed enclosures.

User adjustable controls include a LPF, phase control and variable bass boost (0 to +12 dB, 40Hz to 100Hz) providing enhanced control. To expand system flexibility and user control, input gain can be adjusted using the included wired remote bass control knob or via the input gain control mounted on the enclosure side panel.

The innovative trapezoid shape of the enclosure is designed for high rigidity and to reduce internal standing waves, while also increasing installation flexibility. Can be installed freely in the cabin or under seats and re-positioned with the subwoofer firing rear, front or upwards for optimal bass tuning. The enclosure is fully carpeted, creating a non-slip, durable and scratch resistant surface.

Product description

Pioneer launches a new generation Class-D amplified subwoofer integrating DIGITAL BASS CONTROL. This unique feature generates two selectable Bass Modes: DEEP and DYNAMIC, producing 200 Watts of strong, rich, deep bass that you can feel, without giving up your boot space. Users can easily control and customise the two bass modes directly from the supplied wired remote control.

• HIGH PERFORMANCE: TS-WX70DA Pioneer Woofer with RCA and speaker input – Enjoy a convincing Pioneer quality around sound and enjoy first-class music enjoyment
• Strong sound: Thanks to the built-in Class D amplifier and integrated digital bass control, the Pioneer subwoofer guarantees powerful and precise bass reproduction
• SPECIAL SOUND EXPERIENCE: The car subwoofer has two freely selectable bass modes: Deep and dynamic – for a 200 watt deep bass
• USER FRIENDLY: In addition to the mounting accessories, a cable remote control is included to control and adjust the Class D subwoofer from the driver's seat.
• Compact: The ultra-flat and scratch-resistant housing of the car active subwoofer promises a space-saving installation in the boot without sacrificing much space.

User questions & answers

Question:	Can the late model f150 owners tell me if they used the oem plug between the "c" pillar and the left rear seat
Answer:	Yes as long as it is a Sedan model.
Question:	What size are the subwoofers
Answer:	An aftermarket display is any display other than the factory display screen. This would be a display mirror, monitor, or head unit
Question:	Does this come with the necessary equipment to install this sub offer,Like outline output converter And wiring harness
Answer:	Yes, the car stereo supports audio input
Question:	If f150 owners used the oem plug how did you connect the oem pigtail to the unit harness
Answer:	yes, the car stereo can charge the phone

Product description

400-Watt Monoblock Class D Amp

• 500W RMS x 1 @ 4Ω
• 800W RMS x 1 @ 2ω
• 1 200W RMS x 1 @ 1ω
• Free rasp 10hz–240khz
• Signal-to-noise ratio 100dB

User questions & answers

Question:	Do I need a line output converter if I have a stock head unit that does not have rca plug ins
Answer:	The “nominal” rms output @ 4 ohms x 4 is 60 watts. Here’s a link to the info. I had to Google it to remember. https://www.pioneerelectronics.com/PUSA/Car/Amplifiers/GM+Series/GM-A6704
Question:	What power cable should I use for this amp how many watts
Answer:	This is a 4 channel amp which runs speakers . For a sub you’ll need a mono amp or a 5 channel amp that’ll run a sub and speakers
Question:	Is this amp better than the Rockford prime
Answer:	Yes, regular car speakers are 4 ohms. According to Pioneer this amp is 2 ohm stable. So can easily up to 8 speakers with this amp. Each would receive 62.5 watts rms, and 125 watts peak. Pioneer specs below. Maximum Power Output at 2 Ω 250W x 4
Question:	What’s different from champion series
Answer:	Yes just make sure they're not ran at .5 ohm, look up the Crutchfield guide on running subwoofers. I have 3 10" pioneer subs 4 ohm each on this amp running at 1.3 ohms. Not even using half gain. More then enough power

Product description

Pioneer GM-D1004 400W 4-Channel GM Digital Series Class FD Amplifier

• RMS Power Rating 4 ohms 45 watts x 4 chan /2 ohms 45 watts x 4 chan /Bridged 4 ohms 90 watts x 2 chan
• 4 or 2 channel operation
• Frequency Response 10-40 000 Hz
• Total Harmonic Distortion (THD) < 05%
• Power and Ground wiring is included

User questions & answers

Question:	Can this safely output to a pair of 4 ohm speakers and a pair of 2 ohm speakers at the same time
Answer:	560 watts yes it can power it
Question:	I am about to install 6 speakers in my jeep. i think i only have 1 rca output in my head unit. is it possible to hook up all 6 ? 4 to amp, 2 t the hd
Answer:	Para bosinas
Question:	Can I use this with a factory stereo and with replaced speakers (kickers in my case
Answer:	40 watts RMS x 4 at 4 ohms (65 watts RMS x 4 at 2 ohms) and 130 watts RMS x 2 in bridged mode (4-ohm stable in bridged mode). I use it in my Navigator to power 6 speakers, 2 high range tweeters and 4 midrange 6 1/2 in the doors. Because of the wattage, I was a little concerned it wouldn’t keep up but overall, I’m happy with it. I imagine it would get the job done with 4 6x8’s you would just have to take a little extra time tweaking like I did. I’d reccommend it based on my experience, you wont go wrong with the price. If you find out its not for you, Im sure you could sell it and get all of your money back selling it to someone.
Question:	The pioneer website gives dimensions as 7-1/8" x 1-1/2" x 2-1/2. amazon webpage says size: 8.50in. x 6.95in. x 2.50in. which is correct
Answer:	Yes, use the output rca jack to stack amps.

Product description

2-Channel Bridgeable Amplifier with Bass Boost. New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins.

• 1000 Watts Max Power
• Automatic signal sensing and Turn-On
• Adjustable bass boost
• Variable low pass filter

User questions & answers

Question:	Does this amp have pre-out jacks to piggy back a second amp
Answer:	It handles my 2 12 inch Sony xplods and they’re labeled as 1300 watts max but I run them at a 8ohm load.
Question:	Will this power a single pioneer tsw126m subwoofer its a 1300 max 300 rms 4 ohm 12in subwoofer
Answer:	Yes. Have one in mine. Makes it nice to turn down the bass when the kids are in the car.
Question:	Can you use a universal bass knob on the amplifier
Answer:	Google it. Just type in the question you just asked here in Google search engine and click on search to get results / answers. It works for me 90%of times.
Question:	What gauge wire does this amp require
Answer:	It will not lay flat while in use.

Product description

Pioneer GM-DX871 Mono Car Amplifier (Replacement for 2018 Model GM-D8601)

Main Features:

• 1,600W MAX.
• Mono
• Variable LPF
• Bass Boost Remote
• 1 Ohm available 

Specification

• Class D Mosfet
• Load Impedance 1-8 Ohm
• Wattage RMS(4Ohm) ; 300W x 1
• Wattage RMS(2Ohm) ; 500W x 1
• Wattage RMS(1Ohm) ; 800W x 1
• Frequency Response ; 10Hz to 240Hz 
• THD (Total Harmonic Distortion) ; <0.5%
• S/N Ratio ; > 100dB
• Crossover Frequency(LPF/HPF) Slope ; 40-240Hz , -12dB/oct
• Bass Boost Remote; Frequency, 50Hz, Level, 0-18dB
• Speaker level input with turn-on sensor
• Input; RCA (Low), SP-IN (High)
• Output; RCA (Pass Through)

Product description

Yamaha, the most trusted brand in home audio, adds Bluetooth compatibility in this Hi-Fi receiver for easy wireless access to streaming music services and music on your smartphone or other devices. Enjoy the connectivity and the outstanding and legendary quality of Yamaha Natural Sound.? Frequency Response: 10 Hz – 100 kHz (0 ± 0.5 dB / 0 ± 3.0 dB).

• Advanced circuitry design
• Bluetooth to your favorite streaming music services
• 40 station FM/AM preset tuning; Frequency Response: 10Hz – 100kHz (0 plus/ minus 0.5 dB / 0 plus/ minus 3.0 dB)
• Brushed aluminum finish and simplistic design
• Speaker selector for 2 systems. Input Sensitivity (CD): 500 MV/47k ohms

User questions & answers

Question:	Even though there is no subwoofer output, can one be connected anyway
Answer:	NO!! There are line out jacks but they are fixed, not variable. This means when you turn the volume knob up and down, the volume to the subwoofer stays the same level. See page 10 of the manual here: https://usa.yamaha.com/files/download/other_assets/2/794512/web_ZU46020_R-S202_om_UA_En.pdf
Question:	What is the Bluetooth range
Answer:	There are 3 classes of BT devices. The ranges are under 10m (Class3); 10m (Class2) and 100m (Class3). The range you get between two devices will be the range of the least powerful device. If that's a cell phone streaming music, expect less than ten meters. If it is a computer with a Class2 BT radio, expect a solid ten meters. But the only way you will get more than ten meters (30 feet) reliably, is if both devices are Class 3. And portable devices rarely are.
Question:	can i hook up my turmtable as well
Answer:	I have a question more than answer. My turntable is the rather cheap, ION LP mp3 converter, it has a built in preamp, has a pair of red white RCA output. BUT, WHEN I PLUG IT INTO THE #3 RCA PORT, AS INDICATED ON THE PRODUCT PAGE FOR TURNTABLE, the speakers have no sound. Now, my "speaker" is a Yamaha HS5 monitor, it's hooked to the OUT RCA port via a 1/4" jack at the back of the monitor. I suppose I'll have to use proper hi-fi speakers connected via the loose wire ports?
Question:	So can this fit a total of 4 100watt speakers at once OR 4 25watt speakers at most
Answer:	100 "X" multiplied by 4 = 400 watts max, and multiple speakers can be connected to single channels if you have a full understanding of OHM's and how the wattage changes with different connections, but a single speaker on each channel that matches up closely at least in OHM's and watts will sound best, but multiple 25watt speakers would be fine on a 100watt channel, and with 4-100watt channels that can be repeated if desired, but if that's done with high power low ohm speakers, they will over draw power and burn up the reciever/amplifier and all this information is found via browser search, or just go basic and match printed numbers and sound great and dont worry about it burning up because of something you did.

Product features

The Delight is in the Details

The R-S202 gives you Yamaha’s 125 years of music heritage packaged to reproduce music as it would be experienced live. Bluetooth connectivity adds easy access to streaming music.

Each detail of this receiver was optimized for maximum power and minimal interference. The power transformer was positioned near the amp circuit for peak power supply. The signal ground and power supply ground connect at one point, achieving a higher S/N ratio.

Sleek Design

Less is more. Brushed aluminum finish gives an understated luxury feel that will last in form and function for years to come.

Product description

Pioneer TS-WX130DA compact active subwoofer. Product Dimension: 11 inches x 7-7/8 inches with a height of only 2-3/4 inches

• Pioneer TS-WX130DA Compact 8" x 5. 25" 160-Watt Active Subwoofer with Built-in Amp 8" x 5. 25" woofer ; 160W max
• 50W nominal; Aluminum cone; Urethane surround; Built-in Class D amp; Digital Bass Control tailors frequency response & increases performance with selectable Deep or Dynamic listening modes; Gain
• LPF
• phase & bass modes controllable at remote; Freq resp
• Deep Mode: 20Hz-200Hz; Freq resp

User questions & answers

Question:	does the remote need to be connected? Can I set the sub up and then disconnect it and use my head unit to control the level
Answer:	Total length is 4 Ft.
Question:	How well does it do 100hz to 200hz? I intend to use a low and a high pass to keep it in this range
Answer:	No
Question:	does it have high level input terminals
Answer:	They echo like a cave when turned up too high for me so I would say no.
Question:	can I splice and connect the yellow power cable to power cable of the stereo
Answer:	It comes with an extra pair of the little plastic things that go over the earbud piece.

Product description

General Features:



6″ x 9″ 3-Way Speakers

TS-A Series High Dynamic Range

Multilayer Mica Matrix Cone

Strontium Ferrite Tweeter Magnet

Ferrite magnet motor structure

Frequency Response: 27 Hz to 24 KHz

Sensitivity ( 1W / 1m ): 92dB

Impedance: 4?

550 Watts Peak Power

90 Watts Nominal Power

Top-mount Depth: 3-1/4"

Cutout Dimensions: 8-3/4 x 6

• 550W 6 x 9" TS-A Series 3-Way Car Speakers
• Multilayer Mica Matrix Cone Elastic Polymer Surround PET Cone Tweeter
• Strontium Ferrite Tweeter Magnet Crossover Frequency: 3400 Hz Heat Resistant Voice Coil 4 ohms impedance
• Ferrite magnet motor structure Top-mount Depth: 3-1/4" Cutout Dimensions: 8-3/4 x 6"
• Frequency Response: 27 - 24,000 Hz Sensitivity: 92dB

User questions & answers

Question:	What is the minimum wattage that can be used with these speakers
Answer:	Maybe 50 watts, but don’t crank the volume up. Distorted high volume will blow the speakers.
Question:	Would this fit my Nissan Sentra
Answer:	I do not know, but you can go to the Crutchfield Electronics or Sonic Electronx websites and there is a place where you can enter your vehicle information and it will tell you what speakers will fit an where they will fit.
Question:	Do these come with 4 speakers or
Answer:	it comes with 2 6x9 speakers with wires.
Question:	What ohms are these speakers best at
Answer:	Car speakers are standard 4 ohms

Product description

12” Dual 4 ohms Voice Coil Subwoofer. Frequency range 20 Hz to 220 Hz.

• 12˝ glass fiber and mica interlaced Injection Molded Polypropylene (IMPP) cone construction
• Butyl rubber surround and polycot ton / cotton dual spider for strength and linearity during high excursion
• Oversized 60 oz. double stacked magnet and vented pole yoke for increased power handling

User questions & answers

Question:	Can you give us more information
Answer:	Amazing sub! Pioneer always deliver and this is not an exception. I have them working with Pioneer pro Series TS-B400PRO 4" 500W Bullet Tweeter and the sound is amazing!!!
Question:	What is Mounting depth and air space required
Answer:	Fit as described
Question:	What is the rms rating
Answer:	Supposedly it is 500 watts rms. And that is meant as 250 per coil. If you put 1000 rms into this sub its gonna blow. Also i do not currently recommend this sub because build quality has really gone dowhhill. Not a reliable sub.
Question:	Is this a pair
Answer:	Yes. Very loud.
Question:	I have a 2004 toyota 4 runner, do you know if it fits in place of the factory tweeters? it is for 2004 4runner sr5 without jbl ,(front door upper
Answer:	I fit it in my 2005 sr5 4runner by just sandwiching the tweeter between the metal and removing the oem mount and cutting a little bit of the plastic for it to fit. The magnet holds itself against the metal. Its sketchy but works😂🤷‍♂️
Question:	Will I need bass blockers or anything extra I plan to run them with after market speaker on amp
Answer:	What he means is 3.3uF (microfarad), which would cut off a 4 ohm speaker at 12 kHz @ 6dB/octave roll off.
Question:	is a pair
Answer:	Sold in pairs

Product features

High Efficiency PRO Series Bullet Car Tweeter

A 8.7 cm tweeter from the famous ‘Pioneer Reference for Open Show’ speaker series. With extremely high sensitivity & the horn speaker structure enables TS-B350PRO to deliver high sound pressure levels.