14 best mtx amps for cars

Product description

If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal. Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.

• ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
• HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
• MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
• AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
• SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches

User questions & answers

Question:	Will this fit a 2011 dodge avanger
Answer:	Yes
Question:	Will this work in my 2006 chevy equinox
Answer:	Yes if you have aftermarket radio or the adapter to hook the amp up to factory radio
Question:	What are the dimensions of the subwoofer box
Answer:	The dimensions given in the description are for the amp. When I contacted the seller the informed me to contact the manufacturer, who has gotten back to me yet. So if anyone has the actual dimensions for the speaker enclosure that would be very helpful.
Question:	So does this come with the wire or not
Answer:	Just got it today. Mine didn't come with the wiring. Very disappointed

Product description

This is a complete package! Package includes, MTX loaded car subwoofer system with Mono amplifier and complete amplifier installation kit! If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. You'll just need to connect everything with the amp kit to add some serious bass to your ride. Make your music rock harder with the help of an amplifier with enough power to take your car audio to the next level. This Planet Audio mono amp can handle 1500 watts of max power, and 563 or 1125 watts of RMS power. It features a continuously variable low pass crossover, low level inputs and outputs, power and protection LEDs, heavy duty set screw style terminals, and chrome plated connections. It has it all. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. This 8 gauge amplifier kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, high-quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 6 feet of split loom tubing, (20) 4" wire ties, rubber grommets, a #10 ring terminal, a 5/16" ring terminal, and a 1/4" ring terminal. We are an authorized MTX dealer!

• PACKAGE INCLUDES: MTX loaded car subwoofer system with Mono amplifier and complete amplifier installation kit
• MAXIMUM SOUND QUALITY: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp; With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality.
• SUBWOOFER SYSTEM SPECIFICATIONS: 1200 watt max; 400 Watt RMS; Rubber surround; Polypropylene cone; 2-inch aluminum single 4 ohms voice coil; Final impedance: 2 Ohm; Frequency response: 37 150 Hz; 5/8-inch MDF solid construction; Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches
• AMPLIFIER SPECIFICATIONS: RMS power: 700 watt x 1 channel @ 4 Ohm, 1100 watt x 1 channel @ 2 Ohm, 2500 watt x 1 channel @ 2 Ohm max power, 1500 watt max power; Switchable input sensitivity: 100mV 2V or 2V 8V; Switchable phase shift; Selectable bass boost (0 to +18dB); Signa to noise ratio: 102dB; Frequency response: 20 20KHz; Dimensions (H x W x L): 2.19 x 10 x 10 inches; Remote control included
• INSTALLATION KIT SPECIFICATIONS: 20-foot 8 gauge red power cable; 1/4-inch gold plated ring terminal; 3-foot 8 gauge black ground cable; Number 10 gold plated ring terminal; 16-foot 18 gauge blue turn on wire; 20-foot high performance RCA interconnect; Rubber grommets; 30-foot speaker wire; 5/16-inch Gold plated ring terminal; 6-foot split loom tubing; (20) 4-inch wire ties

User questions & answers

Question:	Are these better then renegade subs
Answer:	Yes
Question:	My 2012 acura tl has a stock amp and sub in it, would i have to do anything special if i get this sub
Answer:	About 1 3/4 in diameter
Question:	Did anyone else have the subs come in a separate delivery than the amp and wiring kit
Answer:	yes they are sold in pairs
Question:	How do you control how much bass it puts out
Answer:	Look up your vehicle on line. It will tell you what will fit. Hopefully these will because they are very nice speakers. Can't be beat for the price.

Product description

Get the most out of your entire car audio system with a small footprint amplifier that packs a big punch the MTX 500 Watt Mono D Bass Amplifier. This high quality MTX amplifier is designed to work with an assortment of subwoofers and is capable of delivering up to 1000 watts of peak power and 500 watts RMS in an incredibly small package. This monster amp features a high efficiency, class D topology. This type of circuit is preferred for driving subwoofers due to its ability to minimize power loss to heat when you rock all night long. To top it all off, this unit was designed to be installed in almost any vehicle thanks to its small chassis size.

• Class D Topology
• Variable LPF
• Selectable Bass Boost
• Small Foot Print Design
• Surface Mount PCB

User questions & answers

Question:	I have the mtx 12 in terminator subs and this amp, but I'm not sure what cords I need to get
Answer:	If your speakers are 4ohm speakers then hook up one speaker to each channel. And place wherever it won't matter. If your speakers are 8 ohm speakers like mine are wire two speakers to a channel. In my application I wired two speakers to channel 1, and two to channel 2 placed the speakers and sound good.
Question:	Will this work with my 2 mtx 7500 series 15's
Answer:	There should be a yellow RCA cord and a reverse wire that is located on the back of the stereo and a red (RCA STYLE) jack/cord attached to the camera. The yellow RCA cord needs to be attached to the yellow RCA jack on the camera (simple). The red (RCA STYLE) jack/cord AND reverse wire both need to be connected to a +12v wire that ONLY provides power when the vehicle is in reverse (example. reverse light). The left over black wire to the camera needs to be connected to chassis ground. *NOTE* the yellow RCA cord has a red lead on the beginning and the end that can be used to transfer power to the camera but, is NOT needed if utilizing the reverse light for power or CAN be used to eliminate the need to run both RCA and reverse (behind stereo) wire by connecting the reverse wire (behind stereo) to the red lead on the RCA cord. For someone who isn't an car audio installer this can be a bit confusing. Basically the stereo needs a wire to communicate the need to switch the screen display from default to camera feed (reverse signal wire) and the camera needs power (red and black wires) and a way to transfer information to the stereo (Yellow RCA cord).
Question:	We just got this hooked up and it's drawing .03 amps when it's off is anyone else having this problem
Answer:	Yes, it does.
Question:	Was just wondering if anyone knew if this sub would work well to push the mtx terminators
Answer:	No special card is need and you cannot use google maps

Product description

1200 Watt Max Dual 12" Terminator Series Loaded Subwoofer Bass System with Amplifier and Bass Knob Included

• Complete amplified bass package bundles 2 x 12 subwoofer enclosure and mono block amplifier
• TNA251 amplifier delivers 250 watts x 1 at 2 ohms; 150 watts x 1 at 4 ohms
• Variable low- and high-pass filters offer 40Hz–400Hz range for sound shaping
• TNE212D2 enclosure features dual 12-inch Terminator subwoofers with 1200 watts max power
• Enclosure boasts 5/8" MDF construction, aviation-grade black carpet, and embroidered Terminator logo

User questions & answers

Question:	Could I pus these on a monoblock amp? Or would I have to bridge them myself
Answer:	Yes they can be put on mono block, that's what I have set up. Just don't bridge it, it's only 2ohm stable not 1.
Question:	Does anyone have the BOSS 1100 watt riot amp with these? If so how do you like? Does it hit hard
Answer:	I've used it temporarily on the sealed enclosure version of these. BOSS amps are cheap for a reason though. Poor sound quality and it doesn't push anywhere near the 1000 watts these can handle. If you want a cheap amp that actually sounds good I'd recommend the Power Acoustik rzr1-2500d it's not 1000 watts RMS but it'll do 700+ on good electrical & sounds Way better than the boss amp
Question:	anybody had these subs for awhile do they last
Answer:	I have had these subs in the box 4 going on 6 years with a 3000 watt competition massive amp pushing 800 watts RMS bridged making it 200% overpowered I paid $122 for them six years ago and they are still thumping to this day
Question:	Is this just the enclosure or is it the two 12" subwoofers and the enclosure in one deal
Answer:	Everything you see, you get...no speaker wires though...

Product description

This is a complete package! Package includes, MTX loaded car subwoofer system with Mono amplifier and complete amplifier installation kit! The MTX TNE212DV combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12" sealed enclosure that has a single terminal cup showing a final 2Ohm load to any connected amplifier. The Terminator subwoofers used in the enclosure include polypropylene dustcaps that are durable allowing them to survive the rigors of most trunks and are lightweight allowing them to efficiently move using less power. Each subwoofer can handle 500 watts RMS power, resulting in a power level of 1000 watts RMS/2000 watts Peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil helping to dissipate the heat generated during extended play. The enclosure itself is made using extra-strength 5/8" MDF (medium density fiberboard) which is the preferred material for subwoofer enclosures. Where other manufacturers only use a 1/2" board, the MTX 5/8" board is stronger ensuring that the enclosure can contain the massive low frequency sound waves generated by the subwoofers without problems.

• MTX TNE212DV 12" 2000W Car Subwoofer Enclosure
• Dual 12 inch vented enclosure with a single terminal cup
• 2,000 watt of max power, 1,000 watts RMS
• Vented design is tuned for harder hitting base
• Polypropylene dust caps are durable and lightweight, allowing them to use less power

User questions & answers

Question:	How are the speakers wired in the box
Answer:	Hello,we will send you a XL liner free of charge.Please give us your order ID.
Question:	Is this a whole package deal? Do I need anything else like more wires to install this
Answer:	Hello,you'd better pair it with FreedConn helmet when intercom,we are not ensure the successful connection with other brands when intercom.
Question:	What are the dimensions of the sub box
Answer:	on the boom mic.

Product description

This is a complete package! Package includes, MTX loaded car subwoofer system with Mono amplifier and complete amplifier installation kit! The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12" sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. The Terminator subwoofers used in the enclosure include polypropylene dustcaps that are durable allowing them to survive the rigors of most trunks and are lightweight allowing them to efficiently move using less power. Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts Peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil helping to dissipate the heat generated during extended play. The enclosure itself is made using extra strength 5/8" MDF (medium density fiberboard) which is the preferred material for subwoofer enclosures. Where other manufacturers only use a 1/2" board, the MTX 5/8" board is stronger ensuring that the enclosure can contain the massive low frequency sound waves generated by the subwoofers without problems. Thunder Bass, Hard hitting Dual 12 inch MTX subwoofers Designed For SPL, Rock your car and the neighborhood! Easy Installation, Mounts quickly in most trunks and SUVs We are an authorized MTX dealer!

• COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub enclosure, Sound Storm EV monoblock amplifier and a complete 8 gauge amp installation wiring kit
• CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp; Boasts 1200 watts max power and 400 watts RMS; Features rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil
• SUBWOOFER BOX ENCLOSURE: This MTX enclosure features solid MDF construction and thick black carpet; Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches
• CAR AMPLIFIER: Sound Storm EV Monoblock A/B MOSFET power Amplifier delivers 1500 watts MAX x 1 channel @ 2 ohms and RMS power: 563 watts x 1 channel @ 4 ohms; 1125 watts x 1 channel @ 2 ohms; Variable low pass crossover: 40 150Hz; Fixed high pass crossover (200Hz); Variable 0 to +18dB Bass Boost; Dimensions (15.5" L x 10" W x 2 3/8" H); Remote control included
• INSTALLATION WIRING KIT: 20-foot 8 gauge red power cable; 1/4-inch gold plated ring terminal; 3-foot 8 gauge black ground cable; Number 10 gold plated ring terminal; 16-foot 18 gauge blue turn on wire; 20-foot high performance RCA interconnect; Rubber grommets; 30-foot speaker wire; 5/16-inch Gold plated ring terminal; 6-foot split loom tubing; (20) 4-inch wire ties

User questions & answers

Question:	Do the subs come with everything needed to make the subs work
Answer:	We use the industry standard for 6.5" speakers mounting holes.
Question:	Does it fit a 2003 ford escape
Answer:	Just one at a time. So you really have to order 2 of them if you need a pair. Sold at unit.
Question:	Does it fit in a 1998 jeep xj
Answer:	Not if the speaker fits without them. I installed them in the front doors in my old Escort without them and they work fine.
Question:	Anyone know the perfect match for the speakers and amp
Answer:	4 ohm's

Product description

The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12-inch sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. This kit comes complete with a 1100W monoblock A/B amplifier, wiring kit and 2-farad capacitor. The Terminator subwoofers used in the enclosure include durable polypropylene dust caps that can survive the rigors of most trunks and are lightweight, allowing them to efficiently move using less power. Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts peak for the entire enclosure. Features Spider Plateau Venting, which is a mechanical cooling process. The enclosure itself is made of extra-strength 5/8-inch MDF. Have everything you need to achieve audio perfection with the included 1100-watt, Monoblock A/B amplifier, 8 gauge wiring kit and 2-farad capacitor as well.

• COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub enclosure, Boss Audio Riot monoblock amplifier, a complete 8 gauge amp installation wiring kit and a 2 farad digital power capacitor
• CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp; 1200 watts max power and 400 watts RMS; Rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil; Solid MDF construction; Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches
• CAR AMPLIFIER: Boss Audio Riot Monoblock A/B MOSFET power Amplifier delivers peak power of 1100 watts, RMS power of 825 watts; 413 watts RMS x 1 at 4 ohms, 825 watts RMS x 1 at 2 ohms, 550 watts MAX x 1at 4 ohms, 1100 watts MAX x 1 at 2 ohms; Bass boost: Switchable or 18 dB; Low Pass Filter: 35 Hz to 160 Hz; Dimensions (L x W x H): 9.125 x 10.4375 x 2.25 inches; Remote control included
• INSTALLATION WIRING KIT: 20-foot 8 gauge red power cable; 1/4-inch gold plated ring terminal; 3-foot 8 gauge black ground cable; Number 10 gold plated ring terminal; 16-foot 18 gauge blue turn on wire; 20-foot high performance RCA interconnect; Rubber grommets; 30-foot speaker wire; 5/16-inch Gold plated ring terminal; 6-foot split loom tubing; (20) 4-inch wire ties
• POWER CAPACITOR: 2 Farad 20V LED Digital Voltage Car Audio Power Capacitor; Capacitance: 2 farad, 2 million microfarad; High level input voltage: 24; Low level input voltage: 20 volts; Percent capacitance tolerance: 10; ESR: 0.00195 ohms @ 120 Hz @ 25 degrees C; Dimensions: 10.3 x 3 x 3 inches

User questions & answers

Question:	Does the amp come separately
Answer:	In the back seat
Question:	What’s the width of them
Answer:	1200wats

Product description

The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12-inch sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. This kit comes complete with a 1500W monoblock A/B amplifier and 2-farad capacitor. The Terminator subwoofers used in the enclosure include durable polypropylene dust caps that can survive the rigors of most trunks and are lightweight, allowing them to efficiently move using less power. Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil and dissipate heat. The enclosure itself is made of extra-strength 5/8-inch MDF. Have everything you need to achieve audio perfection with the included 1500-watt, Monoblock A/B amplifier and 2-farad capacitor as well.

• Loaded subwoofer enclosure
• 1200 watt of max power, 400 watts RMS
• Rubber surround
• Polypropylene cone
• MTX audio logo on dustcap

User questions & answers

Question:	Will it fit in a 2002 ford ranger extended cab
Answer:	Hey man yea my amp came seperately and for some reason the speakers a showed up in two days and it took the amp two weeks
Question:	Will this fit inside a 2012 ford fusion
Answer:	About 12 inches.
Question:	Will it sound loud in a 2004 Jeep Liberty
Answer:	Yes. I was able to plug in and bump. Just make sure the amp levels are adjusted
Question:	Will this fit inside a 2017 Honda Civic
Answer:	should i put this in my 2003 vw gti and had plenty of room

Product description

The newest addition to the massive Alphasonik line-up is a complete bass package! These loaded enclosures also include an amplifier, and amplifier wiring kit to make sure you are supplied with everything you need to add big bad bass to your ride. Alphasonik added these loaded ported enclosures to their line-up in an attempt to revitalize the car audio industry with quality bass at an affordable price, and making the process easier than ever before. The APP122 bass package from Alphasonik is designed to bring high powered bass to your car’s audio system and includes everything you need. The APP122 is an all in one system that consists of a tuned slot port enclosure featuring 12” High Powered Subwoofers, a 1500W MAX amplifier with a bass knob remote which can be remotely installed in the dash, and an 8-gauge top grade amplifier installation kit. Our engineers at Alphasonik have meticulously handpicked the best quality materials to build every piece of this package. The ported enclosure is made of high quality MDF construction with a durable 5/8-inch wood construction designed to reduce vibration which can affect the performance of the subwoofers. As if the great sound wasn't already more than enough to this loaded enclosure, it also looks like something out of a car show magazine! Adding to the design and flare of the APP122 is the aviation-grade black carpet, the Alphasonik embroidered logo, and the Aluminum trim give the enclosures an aggressive, custom look. Do what's best for you and your ride and jump on this deal before it's too late. We guarantee you won't find anything else in the market for this quality at this value. Hit the BUY NOW button and let us know how your EXPERIENCE was.

• The APP122 Dual 12” bass package comes with EVERYTHING INCLUDED! 2 Subwoofers in Ported Enclosure | Monoblock Amplifier with Bass Knob | Complete Amplifier Wiring Kit | With a power handling capacity of 1500 Watts Max (500 Watts RMS), this is all you need!
• Mono Block amplifier features a thermal protection circuit, nickel plated terminal blocks, powder coated chassis, comes with a THD level of 0.2%, and a bass boost control to connect near the driver for optimum loudness control.
• The amplifiers built-in protection circuitry protects your system from input overload, short circuit, and high temperatures. When protection mode is enabled, the LED indicator on the side panel will illuminate.
• Our professional installation 8 AWG amp kit provides a 17’ power cable, 3’ ground cable, 17’ remote turn on wire, 17’ RCA cable, ATC fuse, and accessory wire-ties.
• The ported enclosure is constructed of MDF (Medium-density fiberboard) with black carpet measured at 13.75” high, 29.5” wide, and a depth of 13.5” bottom/9” top.

User questions & answers

Question:	Will this fit in my 2010 Honda Civic
Answer:	It should. It comes with a mounting bracket that I modified (bent) to the shape I needed it to be for mounting.
Question:	will fit 2015 nissan sentra
Answer:	Yes. It is a loud horn.
Question:	Will this fit in a 2012 Mustang
Answer:	Yes, it is easy to replace, there is no need to replace the fuse, as long as it can work normally and stably under a stable 12-24v voltage, and there is no need for special connection to other lines.
Question:	Will it fit a 2001 gti
Answer:	Yes, it can be used in your car

Product features

Alphasonik APP122 Complete Powered Bass Package

The APP122 complete bass pack from Alphasonik is designed to bring high powered bass to your car’s audio system and includes everything you need. The APP122 is an all in one system that consists of a tuned slot port enclosure featuring 2-12” High Powered Subwoofers, a 1500W MAX amplifier with a bass knob remote which can be remotely installed in the dash, and an 8-gauge top grade amplifier installation kit.

The tuned slot port enclosure is made of high quality MDF construction with a durable 5/8-inch wood construction designed to reduce vibration which can affect the performance of the subwoofers.

Adding to the design and flare of the APP122 is the aviation-grade black carpet, the Alphasonik embroidered logo, and the aluminum trim around the ports give the enclosure an aggressive, custom look.

Full Amp Kit Included

• 17' 8awg Power Cable
• 3' 8awg Ground Cable
• 17' 18awg Remote Turn On Wire
• 17' RCA Cable
• ATC Fuse Protection
• Accessory Hardware Package w/ wire-ties

1500 Watts of Power

Your Dual 12 inch subwoofer loaded enclosure delivers huge amounts of bass through its polypropylene cones and rubber surround for studio accurate bass response!

Monoblock Amplifier

Our 500W RMS/1500W Max Mono Block amplifier is included to supply just enough power to your APP122 Enclosure. As an additional perk to your already amazing sound, enjoy a bass boost control knob for added control from anywhere in the front of the vehicle!

Premium Quality Stitching

The sides of the enclosure feature a fully stitched premium quality embroidery of our infamous Alphasonik A Logo.

Unrivaled

The APP122 Dual Subwoofer Enclosure is unrivaled in sound superiority on the road. Your subwoofer box performs at 1,500 Watts for extremely powerful and clear bass! The specially-built enclosure was carefully constructed to maximize your subwoofer's life span. The chambers are reinforced to withstand the jostling of any road condition.

KEY FEATURES:

• 2-12” Subwoofers loaded in factory slot port tuned enclosure.
• 1500W MAX Class A/B Amplifier w/included Bass Knob.
• Custom 5-Star Grills.
• Aluminum Trim on Ports.
• Alphasonik embroidered on top and sides
• 5/8” MDF (Medium-density fiberboard) used on enclosure.
• Dimensions: 13.75” x 29.50” x 13.50”

Aluminum Trim

As if your bass package wasn't already good enough with the sound, we have added some luxurious details to enhance your experience. The aluminum trim, aside from adding a clean and stylish look, adds stability to the enclosure to prevent rattling and cracks from such a powerful system.

Product description

Remote Bass Control for use with MTX THUNDER AND WET series amplifiers

• Package Dimensions: 13.462 cms (L) x 9.144 cms (W) x 1.777 cms (H)
• Package Quantity: 1
• Product Type: Remote Control
• Country Of Origin: China

User questions & answers

Question:	I see some reviews say it's "backwards"... But does the min/max match up to which way your turn the knob or is that incorrect as well
Answer:	Yea its backwards. Counter clockwise for more bass, clockwise to lower bass. But you can just un-screw it and adjust it.
Question:	Can you tell me the exact measurements of the length of the cable, as I have a very large sedan
Answer:	Don't know exact, I drive a dodge neon and I had a good 8-10 ft extra it's plenty long
Question:	will this work with all amps
Answer:	No.. Absolutely not.. It may work on other amplifier brands as long as they accept the 3.5 jack. But the knob has a resistance value that was designed to work with the MTX brand.
Question:	How long is the cable
Answer:	Didn't really measure it, but it's long enough to run to the back of most sedans. about the same length of a set of rca patch cable in an amp kit. So maybe around 16'

Product description

This MTX RT8PT is a 8" single amplified tube that is rated 240 watt MAX. The RT8PT can fit into any space and features butyl rubber surrond, built in amplifier, vented enclosure design, comes with mounting straps and wired bass control. Complete amplifier installation kit is included! **We are an authorized MTX dealer!**

• **Subwoofer:**
• New MTX RT8PT 8" Single Amplified Tube Subwoofer
• 240 Watt MAX
• 120 Watt RMS
• Built In Amplifier

User questions & answers

Question:	Will the 8" MTX Subwoofer fit in the storage space behind the seats of a Toyota MR2 Spyder
Answer:	Hey it's so compact and easily fitted into small places I am sure it would fit it fit in the trunk of my escort hatchback with no problem and that was a tight spacei.
Question:	Will this fit under the rear seats of a Honda Ridgeline
Answer:	Possible. But wouldn't spend the money on it. It's a disappointment
Question:	How much does the speaker weigh
Answer:	15-20 lbs at most. Not heavy at all
Question:	can you hook this up to a factory radio using a speaker level input adapter
Answer:	Yes you can

Product description

This is a complete package! Package includes, MTX loaded car subwoofer system with Mono amplifier and complete amplifier installation kit! The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12" sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. The Terminator subwoofers used in the enclosure include polypropylene dustcaps that are durable allowing them to survive the rigors of most trunks and are lightweight allowing them to efficiently move using less power. Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts Peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil helping to dissipate the heat generated during extended play. The enclosure itself is made using extra strength 5/8" MDF (medium density fiberboard) which is the preferred material for subwoofer enclosures. Where other manufacturers only use a 1/2" board, the MTX 5/8" board is stronger ensuring that the enclosure can contain the massive low frequency sound waves generated by the subwoofers without problems. Thunder Bass, Hard hitting Dual 12 inch MTX subwoofers Designed For SPL, Rock your car and the neighborhood! Easy Installation, Mounts quickly in most trunks and SUVs We are an authorized MTX dealer!

• Subwoofer
• 1200 watt of max power, 400 watts RMS
• Rubber surround
• Polypropylene cone
• MTX audio logo on dustcap

Product description

Don't judge this subwoofer enclosure just by the looks of it. This MTX 8 Inch 120W RMS Amplified Single Vented Subwoofer Enclosure may be small, but it produces giant bass. This bass box is everything you need for a great bass system. It's a convenient size for those who have outgrown having a trunk full of subs. If you are that music enthusiast who wants to experience some bumpin' bass without taking up half of your vehicle, this subwoofer enclosure is right for you. It's a lightweight, durable polypropylene cone with 120 watts of RMS power and uses high or low level inputs making it easy to connect to any system. External Bass Control is included for handy volume control from the front of your vehicle. Get some thumpin' bass in your ride and enjoy your music as you drive with the MTX Subwoofer Enclosure.

• The MTX 8 Inch 120W RMS Amplified Vented Subwoofer Enclosure delivers hard hitting, hard working bass
• Specifications:
• Vented enclosure with integrated amplifier
• Subwoofer Size: 8 inches
• RMS Power Handling: 120 watts

User questions & answers

Question:	Does it come with the hi input wires for the amp
Answer:	Hello! Conversion method: double click volume + button.（Or do this: press and hold the volume "+" button and volume"-" button at the same time before connecting the Bluetooth of the mobile phone to change the automatic or manual answer mode.）.The headset includes both automatic and manual listening functions.
Question:	Is there a 10" version of this
Answer:	Sorry haven't gotten that far in using this yet. Im having trouble with my music disconnecting after a couple of songs each time I use it.
Question:	do i need to run a power supply from my battery for this unit
Answer:	Not sure about the exact length but it fits my medium Shoei Qwest helmet just fine with a little room to spare. Talking about cable going from left speaker wrapped around back of helmet to right speaker.
Question:	What is the nominal/peak wattage of this
Answer:	Direct connect. I connected them to my front door speakers.

Product description

If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. You'll just need to connect everything with the amp kit to add some serious bass to your ride. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. This 8 gauge amplifier kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, high-quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 6 feet of split loom tubing, (20) 4" wire ties, rubber grommets, a #10 ring terminal, a 5/16" ring terminal, and a 1/4" ring terminal. The BOSS B65N High-Level to Low-Level Converter is a hi/low impedance adapter that features an RCA input sensitivity adjustment control. This is perfect if you are looking to add a subwoofer to your current stock head unit that does not include RCA outputs for an amplifier to connect. **We are an authorized MTX dealer!**

• ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
• HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
• MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
• AMPLIFIER INSTALLATION KIT & CONVERTER: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal; Converter: Hi/Low Impedance Adapter, RCA Input Sensitivity Adjustment Control
• SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches