Product description

**Package Includes:**
4 x Lanzar OPTI6MI 6.5" 500W Car MidBass/MidRange Speakers The **LANZAR OPTI6MI** 6.5" 500W Car Mid bass Mid Range Speaker can handle 500 watts of MAX power, has a 4 ohm impedance, die cast aluminum frame, a 30oz magnet, and a mounting depth of 3.03 inches. Add the **LANZAR OPTI6MI** 6.5" 500W Car Mid bass Mid Range Speaker to your car audio system! 1 buy = 4 speakers

• New Lanzar 6.5" 1000 Watt Car Mid Bass Speakers (4 pack)
• 6.5" Paper Cone with Foam Surround
• 500 Watts (2000 Watt 4 pack)
• Die Cast Aluminum Frame
• 1.5" High Temperature CAR Voice Coil, TIL Bobbin

User questions & answers

Question:	Would lanzar opti6MI 6.5 2000 watts fit in my 2018 Nissan versa sadan plus
Answer:	No
Question:	Looking for speakers with a good midbass
Answer:	No, it doesn't work for iPad air 3rd Generation 2019, it ONLY works for iPad 7th Generation 10.2 inch 2019 version.

Product description

Lanzar Model : MAX12

Max 12'' 1000 Watt Small Enclosure 4 Ohm Subwoofer

Black Non-Pressed Paper Cone

Wide Non-Fatiguing Rubber Suspension

Stamped Steel Basket w/Golden Input Terminal

Bumped & Vented Motor Structure

Special Designed Rubber Magnet Boot

2'' 4 Layer High Temperature Kapton Voice Coil

65 + 65 oz. Heavy Double Stacked Magnet Structure

1000 Watts Peak Power

4 Ohms Nom. Impedance

SPL: 91.9 dB

Mounting Depth: 6.42''

Overall Diameter: 12.09''

Lanzar's MAX-series speakers will push your audio to the MAX! This 12' small-enclosure sub will add extra punch to your low-end and give you that huge sound you want. The sound is produced by a 2' four-layer high-temperature Kapton voice coils with two 65 oz. heavy double-stacked magnets, pushing 1000 watts MAX power. It's all housed in a stamped steel basket for heavy-duty stability. And your booming sound is enhanced by the wide, non-fatiguing rubber suspension, specially designed rubber magnet boot, and the bumped and vented motor construction. 4 ohm impedance.

• 1000 WATT POWER: This car subwoofer has 1000 Watt peak power that will produce high sound resonance. It also has 65 + 65 oz. heavy double stacked magnet structure, golden input terminals and 4 Ohm impedance
• WIDE RUBBER SUSPENSION: Made with this non-fatiguing rubber suspension to keep equipment safe. Designed with bumped and vented motor structure for durability and easy installation. The overall diameter is 12.09"
• NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time
• KAPTON VOICE COIL: The speaker subwoofer comes with a 2” 4 layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel basket as well, with a sensitivity of 91.9dB and a special designed rubber magnet boot
• 6.42” MOUNTING DEPTH: Easy to install with its 6.42” mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary cables, installation template and manual

User questions & answers

Question:	I've got 180 watts RMS: is that enough, or should I buy the Kicker subwoofer
Answer:	it's preferred in a sealed box.
Question:	If I put 4 on a punch 1000 will they hold the power
Answer:	No, you will want the MAX12D if you would like a DVC subwoofer.
Question:	is it compatible with a sealed box
Answer:	Depends if your factory Amp is 400 watts..probably would sounds nice..more amps more boom
Question:	are these dvc (dual voice coil
Answer:	The price is for one sub, the photo is only showing front and back of the item.

Product description

Lanzar Model : OPTI6MI

6.5'' -inch Pro Car Audio Sub Speaker

6.5’’ Opti-Drive Car Mid-Bass Speaker - Pro Audio SVC Midbass Car Speaker (500 Watt)

Features:

High-Powered Mid-Bass Speaker

Lab Tested Pro Audio Performance

SVC: Single Voice Coil Car Sub Speaker Design

Recommended for Sealed Enclosure Speaker Box Mounting

Impressive Bass Response, Low-Resonance Frequency Output

Black Pressed Speaker Cone with Rigid Foam Surround

Quick Connect Speaker Spade Terminals

Rugged Die-Cast Aluminum Frame

Includes Custom Molded Speaker Grill, Mounting Template & Wiring

Size/Dimensions:

Mounting Depth: 3.03'' -inches

Overall Diameter: 6.97'' -inches

Technical Specs:

Power Output: 500 Watt MAX / 250 Watt RMS

1.5'' -inch High-Temp CCAR Voice Coil, TIL

Bobbin

Impedance: 4 Ohm

Frequency Response: 105Hz - 12kHz

Sensitivity: 94dB (1w/1m)

Magnet Structure: 30 oz.

Vas: 9.46 Liter

The Lanzar Opti-Drive Car Sub Speakers provide lab tested, high-powered audio performance. Mid-Bass sound drive unit provides the sub speaker with impressive bass response and low-resonance frequency output. Optimal pro audio reproduction style creates clean, high-sensitivity and distortion-free sound -- perfect for mounting in car & truck backseats and trunk panels. Speaker design features high-power output handling, SVC: single voice coil and 4 ohm impedance. The desired audio reproduction of Lanzar’s Opti-Drive Midbass series are perfect for custom car enclosure speaker box and panel mounting that allows audiophiles to fine-tune and tailor their sound via controlled installation. Create the ultimate listening experience and add pro audio sound power with the Lanzar Opti-Drive Car Mid-Bass Sub Speaker.

• 105Hz - 12 kHz FREQUENCY RESPONSE: Lanzar, 6.5” high power performance speaker has 30 oz magnet structure, vas at 9.46 liter and frequency response that complete the package. Also, pack with exceptional 94dB (1w/1m) decibel sensitivity
• POWERFUL 500 WATTs: This 6.5” full range speaker provide up to 500 watts peak power because it is equipped with 30 oz. housed structure. It's all housed in durable die-cast aluminum frames
• 4-OHM MIN IMPEDANCE: This midbass car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of today’s cars. Includes custom molded grill and hardware for easy setup
• CCAR VOICE COIL: Lanzar speakers are capable of 1.5” higher or elevated temperature strength and fatigue properties. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures
• OPTI6MI TEMPLATE: Lanzar upgraded car speaker measures 6.97'' in overall diameter with a mounting depth of 3.03''. The high-quality black paper cone accordion cloth surround with resin coated provides a strong foundation

User questions & answers

Question:	I wonder if they come good both halves or just one for the price posted
Answer:	Hi, I'm Martin and I work for Pyleaudio, parent company of Lanzar. This unit has 250 watts RMS at 4 ohm load. If you have other questions, please let me know. You can reach me at [email protected]. Thank you for choosing Lanzar.
Question:	friend that is price per pair of Lanzar OPTI6MI Opti Pro 500 Watts 6.5" High Power Midbass Speaker (single
Answer:	The price listed is for one speaker only!!
Question:	What is the rms
Answer:	Yes by a kicker or Rockford or alpine or MTX or poke audio just be careful of what you bye make sure it’s off of Amazon prime so you can at least return it
Question:	This price is for the pair or just come one
Answer:	A Punch-1000 from Rockford fosgate can only put out 150amps at 14.4 (average) about 2,160 watts of power so technically yes they can handle it but your amp is gonna go for a workout.

Product features

High Power MidBass

The Lanzar Opti-Drive Car Sub Speakers provide high-powered audio performance. Mid-Bass sound drive unit provides the sub speaker with impressive bass response and low-resonance frequency output. Optimal pro audio reproduction style creates clean, high-sensitivity, and distortion-free sound - perfect for mounting in car & truck backseats and trunk panels.

Product description

Lanzar's Heritage Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Amplifier features include variable high and low pass filters, RCA inputs, bass boost variability, and plenty more features to evolve your audio.

Features:

• Electronic Crossover Network
• Bass Boost Circuitry
• 2 Ohm Stereo Stable
• RCA InputsLine Output (L/R) Channels
• Low + High Pass Filter Controls
• Power + Protection LED Indicators
• Soft Turn ON/OFF
• 1 x 650 Watt RMS @ 4 Ohm
• 1 x 1250 Watt Peak @ 4 Ohm
• 1 x 1500 Watt RMS @ 2 Ohm
• 1 x 2000 Watt Max @ 2 Ohm
• T.H.D.: <0.01%
• S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz
• HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz
• Fuse: 40A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''
• Sold as : 1

• AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.

User questions & answers

Question:	I have two infinity refrence subwoofer's. peaks at 2400 watts and 2.4 ohms for each speaker. so 4.8 ohms. think this amp will push it
Answer:	It'll push them but it'll over heat... I have two 15s that peak at 2000, with a nice size capacitor but it still had a hard time performing and kept shutting off... I bought another one, put one on each sub and BOOM BOOM BOOM is all my neighborhood hears when I drive down the street... Plus I changed my alternator to a higher amperage alternator and added a secondary dry cell battery...
Question:	My sub is a kicker cvr 12 4 ohm, 50-400 watts rms (200 watts per coil), can this work
Answer:	Yes, I was running 2 kicker 12s, then went to the 3000 wat version.
Question:	My subs are 4ohm will this work
Answer:	No
Question:	Will it do well without over heating with a 1400 watt pioneer sub
Answer:	I think it depends on the box you go with

Product features

Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm

• Electronic Crossover Network, Bass Boost Circuitry
• 2 Ohm Stable, RCA Inputs
• Line Output (L/R) Channels, Low + High Pass Filter Controls
• Power + Protection LED Indicators, Soft Turn ON/OFF
• 1 x 350 Watt RMS 4 Ohm, 1 x 1250 Watt Peak 4 Ohm
• 1 x 900 Watt RMS 2 Ohm, 1 x 2000 Watt Max 2 Ohm
• T.H.D.: <0.01%, S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz, HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz, Fuse: 30A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''

Product description

The Lanzar MAXP104D MaxPro Series Small 4 Ohm Dual Subwoofer is designed with the professional in mind—and they'll push your audio to the MAX! This 10 in. small-enclosure sub with dual voice coils will add extra punch to your low-end and give you that huge sound you want. The sound is produced by a 2 in. dual-layer high-temperature Kapton voice coils with two 60 oz. heavy double-stacked magnets, pushing 1,200 watts MAX power. It's all housed in a stamped steel basket with hex key input terminal for heavy-duty stability. And your booming sound is enhanced by the wide, non-fatiguing rubber suspension, specially designed rubber magnet boot, and the bumped and vented motor construction.

• Black nonpressed paper cone
• Specially treated foam-edge suspension
• Stamped steel basket with hex-key input terminal
• Bumped vented motor structure
• Custom-designed rubber magnet boot

Product description

These FOUR LANZAR **AQ5CXW** 5.25" 400W 2-Way Marine/Boat Speakers can handle 200 Watts of MAX Power per speaker (800 Watts per 4). They feature a Resin Treatment Surround, Water-Resistant Construction, a 2 Way Attachable Grille Design, a 1" High Temperature Kapton Voice Coil, a 0.5" Superior Dome Tweeter, and a Mounting Depth of 2.12-inches. Take the party with you on the water with the LANZAR **AQ5CXW** 5.25" 400W 2-Way Marine/Boat Speakers! 1 Buy = 4 Speakers **We are an Authorized LANZAR Dealer!**

• NEW LANZAR **AQ5CXW** 5.25" 800W 2-Way Marine/Boat Speakers (4 Speakers)
• 400 Watts Max (800 Watt Total)
• 5.25'' High Quality Polypropylene Cone
• Resin Treatment Surround
• Water-Resistant Construction

User questions & answers

Question:	What is the overall diameter, and what are the screw spacings
Answer:	I don't think so , the case is not designed to work with keyboard.

Product description

**Package Includes:**
2 x Lanzar OPTI6MI 6.5" 500W Car MidBass/MidRange Speakers The **LANZAR OPTI6MI** 6.5" 500W Car Mid bass Mid Range Speaker can handle 500 watts of MAX power, has a 3 ohm impedance, die cast aluminum frame, a 30oz magnet, and a mounting depth of 3.03 inches. Add the **LANZAR OPTI6MI** 6.5" 500W Car Mid bass Mid Range Speaker to your car audio system! 1 buy = 2 speakers **We are an authorized Lanzar dealer**

• New Pair Lanzar 6.5" 1000 Watt Car Mid Bass Speakers
• 6.5" Paper Cone with Foam Surround
• 500 Watts (1000 Watt Pair)
• Die Cast Aluminum Frame
• 1.5" High Temperature CAR Voice Coil, TIL Bobbin

User questions & answers

Question:	Are they all bass
Answer:	They are 68mm from center; 45 degrees from center lines. The outside diameter is 156mm.Search the Lanzar.com site for the model number and it will give you a PDF version of the cutout template.
Question:	Are these 3 ohm? The add says three but the picture says
Answer:	To be clear it’s not the speaker size that’s an issue. You can fit 6 1/2 in speakers in your car. You could even fit 6 3/4 in speakers in your car. The problem is the depth of the speaker. You could fit these speakers in all your doors, but the front two doors couldn’t have the windows roll down due to the depth of the speaker. I had the same issue in my car but I paid someone to build custom mounts for me so my windows can roll down without hitting the speaker. If you don’t want to go through all that then I would reccomend finding 6 1/2 in speakers that aren’t as deep. Try checking out a website called crutchfield it tells you exactly what speakers can fit in your specific model car. 👍
Question:	Can these feet 2015 Nissan Frontier
Answer:	Great sound for the price
Question:	This price is for pair
Answer:	Recently I took my iPad in to an I fix it store to have a screen protector applied. The young woman easily removed the plastic glued-in screen from the turquoise frame, placed the frame on my iPad, and reassembled.

Product description

Lanzar Model : HTG888. 55000 Watt 8-Channel Mosfet Amplifier 8 X 250W RMS @ 4 Ohms8 X 350W RMS @ 2 Ohms4 X 1, 000W MAX @ 4 Ohms Bridged8 X 500W MAX @ 4 OhmsBass Boost CircuitBridgeable at 4ohms2 Ohm Stereo StableChrome RCA InputsStereo Line Outputs for Left and Right ChannelLow Pass Filter ControlsLPF Freq. Response: 40Hz-250HzHigh Pass Filter ControlsHPF Freq. Response: 40Hz-250HzBand Pass Filter ControlsBPF Freq. Response: 40Hz-3KHzPower and Protection LED IndicatorsSoft Turn-on/Turn-offTHD: S/N Ratio: 90dBChannel Separation: 65dBFreq. Response: 10Hz-45KHzFuse: 100ADimensions: 22. 83''(L) X 2. 24''(H) X 8. 81''(W)

• AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
• INTELLIGENT DESIGN: The car audio amplifier 8 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Chrome RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.

User questions & answers

Question:	This Amp seems like a good deal, but the reviews are saying it craps out just after the warranty. How would I protect myself from getting scammed
Answer:	Who knows what the heck the true rating of this amp is. I did previously have a hifonics 5000 watt 5 channel amp and power does seem comparable.
Question:	this model has bluetooth
Answer:	Hi, our sincere apologies. There is no Line Output port for this model because that is supposedly for our HTG258BT model. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box HTG888 for more details. Thank you.
Question:	How can this be a 5000 watt amp with a 100 amp fuse and 4 gauge wiring . Does'nt make since
Answer:	Look at the fuses.. example two 60a fuses 1200 including voltage, may see 1300 total power RMS in good soild electrical.
Question:	Where is Line out it advertised
Answer:	yes without any problem

Product features

Lanzar Amplifier Car Audio

• 8 X 250W RMS 4 Ohms
• 8 X 350W RMS 2 Ohms
• 4 X 1,000W MAX 4 Ohms Bridged
• 8 X 500W MAX 4 Ohms
• Bass Boost Circuit, Bridgeable at 4ohms
• 2 Ohm Stereo Stable, Chrome RCA Inputs
• Stereo Line Outputs for Left and Right Channel
• Low Pass Filter Controls, LPF Freq. Response: 40Hz-250Hz
• High Pass Filter Controls, HPF Freq. Response: 40Hz-250Hz

Features:

• Band Pass Filter Controls
• BPF Freq. Response: 40Hz-3KHz
• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: <0.01%
• S/N Ratio: >90dB
• Channel Separation: >65dB
• Freq. Response: 10Hz-45KHz
• Fuse: 100A
• Dimensions: 22.83''(L) X 2.24''(H) X 8.81''(W)

Product description

Lanzar Model : HTG157

3000 Watt 2 Ohm Stable Mono Block Mosfet Amplifier

1 x 650W RMS @ 4 OHMS

1 x 1250W Peak @ 4OHMS

1 x 1500W RMS @ 2 OHMS

1 x 3000W Max @ 2 OHMS

Electronic Crossover Network

Bass Boost Circuit

2 Ohm Stable

Nickel RCA Inputs

Line Outs for Left and Right Channel

Low Pass Filter Controls

Power and Protection LED Indicators

Soft Turn-on/Turn-off

THD: <0.01%.

S/N Ratio: >90dB

Freq. Response:10Hz~45KHz

LPF Freq. Response: 50Hz-250Hz

HPF Freq Response:80HZ

Fuse: 40A x1

Dimensions:12.99''(L) x 2.24''(H) x 8.81''(W)

• AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound
• INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp
• GREAT DEAL: Often a monoblock amp comes with a high price tag Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels

User questions & answers

Question:	Can I use this for my
Answer:	Yes, 2 fuse
Question:	Will this push 2 12" kicker comp r at 2 ohm
Answer:	Bought it a year ago and it sat in my closet. Never opened and went to install it. It didnt work. This is crap
Question:	do it have any fuse
Answer:	Yes
Question:	i have no sound.how do you get it to work
Answer:	….if the amp actually worked, yes. Sadly mine did not, nor did the replacement.

Product features

Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 3,000 Watt, 2 Ohm, MOSFET, RCA Input, Bass Boost, Mobile Audio

• 1 x 650W RMS @ 4 OHMS
• 1 x 1250W Peak @ 4OHMS
• 1 x 1500W RMS @ 2 OHMS
• 1 x 3000W Max @ 2 OHMS
• Electronic Crossover Network
• Bass Boost Circuit
• 2 Ohm Stable
• Nickel RCA Inputs
• Line Outs for Left and Right Channel
• Low Pass Filter Controls

• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: <0.01%.
• S/N Ratio: >90dB
• Freq. Response:10Hz~45KHz
• LPF Freq. Response: 50Hz-250Hz
• HPF Freq Response:80HZ
• Fuse: 40A x1

Product description

Upgrade your audio system with Lanzar's next-generation power handling and distribution amplifier technology. New for 2014, Lanzar introduces the innovative Heritage Series Bluetooth Amps that combine high-performance audio processing power with Bluetooth wireless streaming capability!. Engineered to perform and packed with versatile sound specialization, the Heritage Series Amps also feature MOSFET efficient power processing, bass boost circuitry, 2 Ohm stereo stability, bridge-ability and plenty more features to amplify and satisfy. Join the trend of Bluetooth and sound amplifying power with Lanzar Heritage (HTG) amps.

Features:

• 4 X 250W + 1 X 650W RMS @ 4 Ohms
• 4 X 350W + 1 X 1,500W RMS @ 2 Ohms
• 2 X 1,000W MAX @ 4 Ohms Bridged
• 4 X 500W + 1 X 2,000W MAX @ 4 Ohms
• Wireless Bluetooth Audio Interface
• Bass Boost Circuit
• Bridgeable at 4 Ohms
• 2 Ohm Stereo Stable
• Chrome RCA inputs
• Stereo Line Outputs for Left and Right Channel
• Low Pass Filter Controls
• LPF Freq. Response: 40Hz-250Hz
• High Pass Filter Controls
• HPF Freq. Response: 40Hz-250Hz
• Band Pass Filter Controls
• BPF Freq. Response: 40Hz-3KHz
• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: <0.01%
• S/N Ratio: >90dB
• Channel Separation: >65dB
• Freq. Response: 10Hz-45KHz
• Fuse: 30A X 3
• Dimensions: 19.29''(L) X 2.24''(H) X 8.81''(W)
• Sold as : 1

• AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Chrome RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The car audio amplifier 5 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• BLUETOOTH: With built-in Bluetooth, you'll be able to wirelessly stream audio from virtually any Bluetooth device. Instantly stream your favorite tracks from your smartphone or tablet, or favorite internet radio providers like Pandora, Spotify, iHeart.

User questions & answers

Question:	Can I run a chuchero and a subwoofer
Answer:	BT1.2 if I remember... NFI about AptX. In any event, it's really a crap item. Some Chinese company bought the Lanzar name; it's not the quality it was. At all.
Question:	Can I run 2 midrange speakers and a subwoofer
Answer:	Hi, it is a class D amplifier. Thank you.
Question:	Bluetooth version? AptX features
Answer:	yes. it comes with an external microphone.
Question:	Is it monoblock? Class d? Class a? class a/b? Class b
Answer:	please select shipping from JOINLGO not amazon, then we will send the kit to you from China via DHL fast shipping. please leave order message "needs 9" screen", then we will send the kit with a 9" monitor. thanks,

Product description

3-Way Electronic Crossover Hi-Pass Crossover: 32Hz-800Hz For Front & Rear Channels X10 Frequency Multiplier For Front Channel Low-Pass Crossover: 50Hz-160Hz For Subwoofer Channel 18dB Per Octave Crossover Slope Variable Bass Frequency: 40Hz-120kHz Boost Level: 0-12dB Parallel Input Switch, Mixed In/Out Switch Remote Subwoofer Level Control Power On LED Indicator Dimensions: 7.5H x 7W x 1.4D

• AUDIO CROSSOVER: Lanzar Vibe 3 way electronic crossover network features hi-pass and low-pass crossover. Hi-pass crossover has 32Hz - 800 kHz frequency response for front and rear channels. Low-pass crossover has 50Hz - 160 kHz for subwoofer channel
• POWER LED INDICATOR: This indicator will light up when switching power supply is activated, and the unit is operational. Also, pack with remote subwoofer level control and parallel input switch, mixed in/out switch
• SUBWOOFER FREQUENCY CONTROL: The Vibe X6 crossover network series gives you complete control of your sound with the stereo or mono switch. The subwoofer channel between 50 hz and 160 hz is for the selection of the low-pass crossover frequency
• 12dB OCTAVE SLOPE: Your amplifier needs to be in order to make your speakers work their best. Lanzar Vibe X6 series has an exceptional 12dB per octave crossover slope to complete the package
• SIZE: Lanzar upgraded audio crossover that measures 7.5''H x 7''W x 1.4''D. The X10 frequency multiplier for front channel, 40Hz - 120 kHz variable bass frequency provides full range and control of the speakers’ performance

Product description

Lanzar Model : MAXP104D

Max Pro 10'' 1200 Watt Small Enclosure Dual 4 Ohm Subwoofer

• Black Non-Pressed Paper Cone

• Specially Treated Foam Edge Suspension

• Stamped Steel Basket w/Hex Key Input Terminal

• Bumped Vented Motor Structure

• Custom Designed Rubber Magnet Boot

• 2'' Dual Layer High Temperature Kapton Voice Coil

• 60 + 60 oz. Heavy Double Stacked Magnet Structure

• 1200 Watts Peak Power

• Dual 4 Ohms Nom. Impedance

• Fs: 50Hz, Qms: 4.92, Qes: 0.84, Qts: 0.72, SPL: 85(dB), Vas: 4.908(Cuft)

• Mounting Depth: 5.12"

Lanzar's MAX PRO-series speakers are designed with the professional in mind - and they'll push your audio to the MAX! This 10' small-enclosure sub with dual voice coils will add extra punch to your low-end and give you that huge sound you want. The sound is produced by a 2' dual-layer high-temperature Kapton voice coils with two 60 oz. heavy double-stacked magnets, pushing 1200 watts MAX power. It's all housed in a stamped steel basket with hex key input terminal for heavy-duty stability. And your booming sound is enhanced by the wide, non-fatiguing rubber suspension, specially designed rubber magnet boot, and the bumped and vented motor construction. Dual 4 ohm impedance.

From the Manufacturer

• 1200 WATT POWER: This car subwoofer has 1200 Watt peak power that will produce high sound resonance. It also has 60 + 60 oz. heavy double stacked magnet structure, hex key input terminals and dual 4 Ohm impedance
• FOAM EDGE SUSPENSION: Made with a specially treated foam edge suspension to keep equipment safe. Designed with bumped and vented motor structure for durability and easy installation.
• NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time
• KAPTON VOICE COIL: The speaker subwoofer comes with a 2.5” dual layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel basket as well, with a sensitivity of 85dB and a special designed rubber magnet boot
• 5.12” MOUNTING DEPTH: Easy to install with its 5.12” mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary cables, installation template and manual

User questions & answers

Question:	What box do u recommend. Sealed or ported
Answer:	They honestly sound horrible. I tried replacing my Sony speakers with these, and that was a huge mistake. They have very low sound quality and medium bass.
Question:	i have a 1000 watt mono Fosgate p1000..wld it be safe to run 3 of the 15's on it
Answer:	They’re 2 ohms but i have 4 in a grand marquis on a 2000 watt amp music is crisp
Question:	I have 2 of the 2000 watt max 15" and a planet audio vx4002 should i wire them in series for a 2 ohm load on both subs and amp
Answer:	I believe the Frontier accepts 5.25" or 6.5". Not 100% on this though. Nonetheless, be warned: these speakers weigh about 6 lbs. They're much heavier and deeper than many stock speakers. Modifications may have to made to accommodate the speakers so they don't interfere with the window track. and other parts in the door.
Question:	if i buy 2 of these speaker what amp would i recommend getting to put out some power
Answer:	Great product