14 best boss car subwoofers

Product description

**We are an authorized Boss dealer** The **Boss CXX10** 10" car subwoofer features a MAX power handling of 800 watts (1600W per pair) and a RMS power handling of 400 watts (800W per pair). Other features include the Butyl Rubber Surround, Aluminum Voice Coil and the Poly Injection Cone. The mounting depth is 3.75' and the diameter is 9.2". 800 Watt Max Power (1600W per pair) 4 Ohm Subwoofer Frequency Response 38 Hz

• **Subwoofers:**
• New Boss CXX10 10" 1600 Watt 4 Ohm Car Audio Power Subwoofer Sub Woofer Stereo (Pair)
• Total Power Output: 800 Watts (1600W per pair)
• Impedance: 4 Ohms
• Voice Coil Structure: SINGLE

User questions & answers

Question:	Does this come with the amp? Its in the pictures but not the description..smh
Answer:	Most will come out eventually but they often scrunch up again when tires roll over them. They are not great but better than a cement floor.
Question:	How many watts do the amp supply
Answer:	hi, thank you for your question, actually, this backing of the mat is waterproof and anti-slip, i think it can be used on a floor that gets wet frequently. thank you again.
Question:	Is this a 2 channel amplifier
Answer:	I had them same problem. I got two pieces of 1/2" galvanized pipe each the width of the short side of the mat. I fastened the mat and pipe together with Zip ties. Just poke holes in the mat with a knife and push the Zip ties through. The pipes hold the mat flat and it hasn't moved at all. I suppose a strong enough wind could move it but so far a 35 mph wind didn't budge it. I also Zip tied two mats together to make a longer and easier place to park that old car.
Question:	What is better for these speakers a sealed or ported box
Answer:	Very flimsy. Doesn't stay put.

Product description

BOSS Audio Elite BE8D 8 Inch Car Subwoofer - 600 Watts Maximum Power, Dual 4 Ohm Voice Coil, Sold Individually

• CONE: Made from Polypropylene, the BE8D 8-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long lasting subwoofers
• VOICE COIL: Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material gives our speakers the advantage of longer pay times with lower weights
• SURROUND: Rubber has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear
• STAMPED BASKET: The stamped basket offers a strong and rigid platform allowing the listener to hear clean and clear
• SPECIFICATIONS: Resonant frequency - 49 Hz, Sensitivity SPL (1W/1m) - 83 Db, Impedance – 4 Ohms, Port frequency – 52 kHz, Dimensions – 9” x 9” x 4.3”, Mounting Depth – 3.6”, Mounting hole – 7.3”, Weight – 4.6 Lbs.
• WARRANTY: BOSS Audio Systems provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	Does this sub have a crossover built into it
Answer:	Yes, its a legitimate motorcycle parking rug.
Question:	is this 1 or 2 subs
Answer:	hi, thank you for your question, i am sorry to tell you that item has no fire rating because it is made of felt fabric for above layer and made of PVC for backing layer. thank you again.
Question:	Two of these wired parallel will be how many ohms
Answer:	I'm sure you could use double-side tape. I haven't adhered mine and have no issues with the ends curling. I've had it for about 5 months.
Question:	What size amp, and best wiring method to push 4 of these 8” subs
Answer:	I don't think this is designed for long term outdoor usage.

Product features

Break Your Subwoofer In

A subwoofer must go through a short but important process of 'break-in' before it is run under harsh conditions. The 'break-in' process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

Cone: Polypropylene

Commonly called just PP, this plastic has various forms. It is a resilient and durable manufactured material that can be used in thousands of applications across virtually all fields. It can be used for tubes, car trims, and bags. In the specific case of our cones, this material allows for maximum give that produces great sounding speakers lasting you a long time.

Surround: Butyl Rubber

Butyl Rubber is a synthetic (man made) rubber and is valued for its chemical inertness, impermeability to air and the ability to endure or resist exposure to the many types of weather fronts. Butyl rubber has many different applications. Anywhere from Sports equipment to automotive parts, the medical industry and more. We use them for the Surrounds that connect the cone to the basket.

Product description

With extreme looks and bass output, The CXX8 8" Chaos extreme Series single voice coil subwoofer from BOSS Audio is the stylish upgrade to your car's audio system with super-clear lows. With a metallic Black finish that accents any interior and impressive 600 watts of power handling, the CXX8 produces both looks and sound that stand out above the rest.

• Cone - Made from Polypropylene, The CXX8 8 Inch Car Subwoofer Provides a Resilient and Durable Material That Can Offer Great Sound with The Advantage of a Long-Lasting Subwoofer
• Surround - Rubber has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear
• Stamped Basket - A stamped basket can absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures.
• Voice Coil - Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material gives our speakers the advantage of longer pay times with lower weights
• Specs - Resonant Frequency: 49 Hz, Sensitivity SPL (1W/1m): 83 Db, Dimensions: 8. 25” x 8. 25” x 4. 3”
• - BOSS Audio Systems provides a powerful 3-year platinum online dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	Can you run this with out a box and how tall is the sub
Answer:	Yes it does come with the amp.
Question:	This is only one sub right? Or two
Answer:	1100
Question:	will this fit in my 06 honda civic, sone models come with subwoofers made in the rear window and mine happen to be one but my woofer is busted
Answer:	No this is a monoblock only 1 but it is very powerful I bought Just the amp for my wife and then got a single 12 inch 1000 watt boss sub and box hits so hard sounds great she loves it I highly recommend this amp for a single sub but not 2 subs
Question:	Can this sub replace the OEM sub to a 2002 yukon
Answer:	We have a sealed box. Works how we want.

Product features

Break Your Subwoofer In

Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to.

This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure.

The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

Cone

Polypropylene is a resilient and durable manufactured material that can be used in thousands of applications across virtually all fields. In the specific case of our cones, this material allows for maximum give that produces great sounding speakers lasting you a long time.

Voice Coil

Our speakers are capable of higher or elevated temperature strength and fatigue properties that will increase performance and efficiency of heavy duty play time through lower weight and higher operating temperatures.

Basket

The stamped basket offers a strong and rigid platform allowing the listener to hear clean and clear music output.

Surround

Impermeable to air, rubber has the ability to endure or resist exposure to the many types of weather fronts. Rubber has many different applications. We use it for the surrounds in a many of our speakers to connect the cone to the basket.

Product description

BOSS Audio P100F 10 inch car subwoofer - 1200 Watts maximum power, single 4 ohm voice coil, sold individually

• CONE: Made from Polypropylene, the P100F 10-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long lasting subwoofers
• VOICE COIL: Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material gives our speakers the advantage of longer pay times with lower weights
• SURROUND: Rubber has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear
• STAMPED BASKET: The stamped basket offers a strong and rigid platform allowing the listener to hear clean and clear music output
• SPECIFICATIONS: Resonant frequency - 48 Hz, Sensitivity SPL (1W/1m) - 85 Db, Impedance – 4 Ohms, Dimensions – 11” x 11” x 4”, Mounting Depth - 3.4”, Mounting hole - 8.1”, Weight – 9.1 Lbs.
• WARRANTY: BOSS Audio Systems provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	I bought this in March. How does the warranty work
Answer:	No
Question:	is this a Free Air Sub
Answer:	I
Question:	is this a shallow mount speaker because my box isnt very deep
Answer:	2 ohms.
Question:	So can this go in a ported box and function well
Answer:	Honestly I'm not sure. I only needed one, because I I'll ready had 2-12" Rockford fogates. Maybe wire them in parallel, they should say something about the RMS on the back of them, that's the continuous wattage to run them at. It will say 600 watt peak and then like 250 watt rms. If you run them at 600 watts you'll blow them.

Product features

Break Your Subwoofer In

A new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

• CONE: Made from Polypropylene, the CXX124DVC 12-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long-lasting subwoofers. VOICE COIL: Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material, gives our speakers the advantage of longer pay times with lower weights
• SURROUND: We use rubber in a lot of our subwoofers. It has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear. STAMPED BASKET: A Die-cast frame can absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures
• SPECIFICATIONS: Resonant frequency - 32 Hz, Sensitivity SPL (1W/1m) - 85 Db
• SPECS: Impedance – 4 Ohms, Port frequency – 34 Hz, Dimensions – 13” x 13” x 5.4”, Mounting Depth 4.8”, Mounting hole 11”, Weight – 7.8 Lbs.
• WARRANTY: BOSS Audio Systems provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	What is the rms wattage rating
Answer:	A friend got mine into my 2000 Chevy Tahoe for me. So I assume it will work in your 2002 Yukon. Speakers are great and give good base and sound. Great quality for the price!

• Cone - Made from Polypropylene, the AR100DVC 10-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long-lasting subwoofers
• Voice Coil - Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material, gives our speakers the advantage of longer pay times with lower weights
• Surround - We use rubber in a lot of our subwoofers. It has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear.
• Basket - A Stamped basket frame is able to absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures
• Specs - Resonant frequency: 36 Hz, Sensitivity SPL (1W/1m): 85 Db, Impedance: 4 Ohms, Port frequency: 38. 2 Hz, Dimensions: 11” x 11” x 5. 4”, Mounting Depth: 4. 8”, Mounting hole: 9. 1”, Weight: 7. 6 Lbs.
• - BOSS Audio Systems provides a powerful 3-year platinum online dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	Que amplificador necesito para un par de bocinas de estas
Answer:	It is possible for the P100f to work well in ported box. Thank you.
Question:	Does it come with a box
Answer:	It fit perfecty in the spot of the old sub. I don't use a box. My stereo is extremely adjustable . If my stereo was basic it might not work. I love it and it goes well wih my 4 inch speakers. Its like I have a comcert in my car . Unbeatable price for what the sound it puts out
Question:	What's the measurement from the bottom of the lip to the bottom of the magnet
Answer:	The CX122 is sold as a single subwoofer.
Question:	What’s the rms watts
Answer:	Hello, The CX8 should be a great fit being it matches the 8-inch dimension of your current speaker. Thank You!

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

8 Gauge amplifier installation kit includes:

• 20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder
• 3 Foot - 8 Gauge Black Ground Cable
• 16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire
• 20 Foot High Performance RCA Interconnect, 6 Foot Split Loom Tubing
• (20) 4" Wire Ties, Rubber Grommets
• 5/16" Ring Terminals, 1/4" Ring Terminals, Speaker Terminals

User questions & answers

Question:	does the fuse holder come with a fuse installed or do i need to pick one up and if so what kind
Answer:	It comes with the fuse holder and the fuse you have to install it but that's simple to do just install it about 6inches from the battery :)
Question:	What gage is the speaker wire
Answer:	The speaker wire in my kit was 16 gauge, I was hoping for at least 12 gauge.
Question:	How long is the rca patch cable
Answer:	20 feet gold rca cable. It's long enough for me:)
Question:	how many watts
Answer:	8 Guage can only handle a few hundred watts or so RMS. You might be able to get a 5-channel system that uses 700W RMS to be properly powered BUT that's probably right around the peak for this gauge of wire. That being said, BOSS WILL NOT WORK FOR THAT. Boss uses garbage materials and typically only deliver 1/3 of what they say they are delivering. I've seen the tests with my own eyes with wiring and amps and they fall apart. Don't wire anything more than 100W RMS or so total with this kit or you might melt it.

Product features

KIT2 Includes

Product description

Boss Audio Systems has been Building and delivering subwoofers for over 28 years. If you're looking for the perfect Subwoofer for your sound system, you'll find it here in the 2016 catalog. Our engineers design all of the percussion needed to make your favorite music come Alive with perfection. Whether you're Building a great wall of subs, or simply need a little bottom end, Boss Audio Systems offers all the choices necessary to satisfy your particular taste.

• Sensitivity SPL (1W / 1m) 88 dB, Resonant Frequency 42 Hz
• Paper Treated Cone, 2 Inch Aluminum Voice Coil, Foam Surround
• Sealed Enclosure Internal Volume: .5 Cubic Feet, Ported Enclosure Internal Volume: .8 Cubic Feet
• 3 Inch Round Inch Port Circumference, 8 Inch Port Length, 45 Hz Port Frequency
• 3.8 Inch Mounting Height, 7 Inch Mounting Hole Diameter
• Dimensions: Depth 8.3” x Width 8.3” x Height 4.3”
• 3 Year Platinum Online Dealer Warranty

Product features

Break Your Subwoofer In

A new subwoofer must go through a short but important process of 'break-in' before it is run under harsh conditions. The 'break-in' process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

Product description

Boss Audio CH10DVC - 10-Inch 1500 Watt, Dual Voice Coil, 4 Ohm Subwoofer

• Sensitivity SPL (1W / 1m) 84 dB, Resonant Frequency 38 Hz
• Polypropylene Cone, 2 Inch Voice Coil, Rubber Surround
• Sealed Enclosure Internal Volume: .8 Cubic Feet, Ported Enclosure Internal Volume: 1.4 Cubic Feet
• 3 Inch Round Inch Port Circumference, 13 Inch Port Length, 32 Hz Port Frequency
• 4.6 Inch Mounting Height, 9.3 Inch Mounting Hole Diameter
• Dimensions: Depth 11” x Width 11” x Height 4.8”
• 3 Year Platinum Online Dealer Warranty

User questions & answers

Question:	what is the mounting depth
Answer:	600W RMS @ 4 Ohms
Question:	The manufacturer lists these at 1800 watts rms and you list them here at 1200 rms. Which is correct
Answer:	I didn't get the warranty
Question:	Are these sold as a pair
Answer:	The P100F is not a free air subwoofer.
Question:	Any recommendations on what grill cover will fit
Answer:	Yes, this speaker is shallow, i forget the exact dimensions but i think the box i used was only 4 or 5 inches deep.

Product features

Break Your Subwoofer In

A new subwoofer must go through a short but important process of 'break-in' before it is run under harsh conditions. The 'break-in' process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure.

Product description

This car audio package includes a Boss Audio 1400-watt subwoofer, 1500-watt amplifier with a remote and wiring kit, and a Q-Power enclosure. Give your car's audio system extra bump with the ultimate performance and high power of the Boss Audio CX122 12-Inch 1400-Watt Subwoofer. Offering 1400 watts of max power and a 700 watt RMS power rating, the Boss CX122 sub delivers with its heavy-stamped steel frame, single 4-ohm voice coil and a custom-tooled, injected cone. It also features an efficiency of 94 dB and frequency response of 25Hz-3kHz. You, yeah you, you need some more bump in your vehicle and the Boss Armor 1500W Monoblock Amplifier with 8-gauge wiring kit is the one that delivers the jams in your ride. As a Class A/B amplifier with a MOSFET power supply, it gives you crystal clear and crisp acoustics as you drive down the open road. It's 2-Ohm stable to produce more power and more volume and is full of features that will leave you speechless. It shows off switchable bass boost, variable gain control, a variable low-pass filter, high and low-level inputs, thermal protection, and a subwoofer level control that gives you the ability to boost the sub level when an amp or subwoofer are connected. It has a peak power of 1500 watts at 2 Ohms, RMS power of 1125 at 2 Ohms, peak power of 750 watts at 4 Ohms, and RMS power of 563 watts at 4 Ohms. This amplifier also comes with an 8-gauge wiring installation kit for your convenience. The Q Power 12-Inch Single Heavy Duty Vented Subwoofer Enclosure features solid 5/8-inch MDF construction, charcoal carpet covering, a dual vented design, and terminal cup connectors.

• PACKAGE INCLUDES: Boss Audio 1400-watt subwoofer, 1500-watt amplifier with a remote and 8 gauge installation wiring kit, and a Q-Power subwoofer enclosure
• 12-INCH SUBWOOFER: 1400 watts max power; 700 watts RMS power; Single 4 ohm 2-inch voice coil; Custom tooled, injected cone; Efficiency: 82 dB; Frequency response: 25Hz 3kHz; Mounting depth: 5.4 inches; Warranty: 3-year warranty
• 1500-WATT MONO AMPLIFIER: Monoblock, Class A/B, MOSFET Power Supply; High and Low Level Inputs; RMS Power: 563 watts x 1 channel @ 4 ohms; 1125 watts x 1 channel @ 2 ohms; Max power: 750 watts x 1 channel @ 4 ohms; 1500 watts x 1 channel @ 2 ohms; THD: 0.01%; S/N ratio: >105dB; Dimensions: 10.31 x 6.5 x 2.56 inches; Warranty: 6-year warranty
• 8-GAUGE WIRING KIT: 20 ft. 8 Gauge Red power cable; Competition high quality fuse holder; 1/4" Gold plated ring terminal; 3 ft. 8 Gauge Black ground cable; #10 Gold plated ring terminal; 16 ft. 18 Gauge Blue turn on wire; 20 ft. High performance RCA interconnect; Rubber grommets; 30 ft. Speaker wire; 5/16" Gold plated ring terminal; (20) 4" Wire ties
• 12-INCH SUBWOOFER ENCLOSURE: 5/8-inch MDF construction; Volume: 1.65 cubic feet; Tuned to 42 Hz; Single chamber, slot port vent design; Durable charcoal carpet covering; Weight: 22 pounds; Dimensions: 15 x 17 x 13 inches; Warranty: 2-year warranty

User questions & answers

Question:	what are the measurements of the box
Answer:	Depende del sistema de audio que quieras poner en tu vehículo, yo tengo un amplificador de 3,700 y es mucho para dos Subwoofer de esos. Pero si vas a conectar más bocinas de audio, creo que el de 3,700 está bien, pero si solo es para dos Sub de esos, con una de menos está bien.
Question:	Does it come with instructions and will it fit in my 2000 ford explore
Answer:	No but it comes in a box.
Question:	Whys the wire gauge on the wiring
Answer:	11 x 11 x 5.4 inches
Question:	will this fit in a 2009 dodge journey
Answer:	700 rms couldn't handle 600 watt amp

Product description

This Package Includes: 2 x 12" Boss Subwoofers 1 x Ported Enclosure 1 x Amplifier 1 x Wiring Kit Give your car's audio system extra bump with these **Boss CX122** Subwoofers. Offering a 1400 watt max and a 700 watt RMS per sub, these Boss CX122 subs have a heavy stamped steel frame, single 4 Ohm voice coils and a custom tooled injected cone. The Boss CX122 subs have a mounting depth of 4 1/8" and are 12". The **Q POWER 12"** Dual Heavy Duty Vented Subwoofer Enclosure features solid 5/8" MDF construction, charcoal carpet covering, a dual vented design, and terminal cup connectors. Turn your ride into a sound machine with the help of the Q POWER 12" Dual Heavy Duty Vented Subwoofer Enclosure! [List item][1] [1]: http://www.vminnovations.com/sys/resource.ashx?guid=1b54c6b366dc4ad1954d428410d37b2d

• **Subwoofers:**
• NEW **BOSS CX122** AUDIO CHAOS 12" 1400 WATT Car Subwoofer
• 1400 Watt MAX
• 700 Watt RMS
• Heavy Stamped Steel Frame

User questions & answers

Question:	Why is there no speakers amp and wiring kit
Answer:	Hello, The P80DVC has a rating of 500W RMS x 1-channel. Thank you!
Question:	Is the amp monoblock
Answer:	Bix is too small ? Turn the bass down ? Too much power or wired incorrectly
Question:	What is the wire gauge that comes with this
Answer:	thats not how you measure a speaker. Its most likely a 6x8 speaker whole. Oval and round don't work out. Get the right speakers or get adapters you hack.
Question:	What wattage is the speakers on this
Answer:	Hello, The P80DVC does not come with a cover. Thank you, Boss Audio Support

Product description

Pump out the jams on your next adventure with the Boss Audio MC900B Class A/B 4-Channel Full Range All-Terrain Amplifier. This 4-Ohm stable Amplifier features 500 Watts Max Power to keep your tunes rolling. Hook your smartphone or MP3 Player up through the Auxiliary Input to listen to your playlists. Plug into the USB Port to charge your USB-Connected devices. Bluetooth Audio Streaming lets you play your favorite music apps like Pandora or Spotify. No need for an In-Dash Head Unit to play your music. Control it all with the Inline Multi-Function Remote Control. The MC900B Amplifier features weatherproof connectors to prevent corrosion and provide protection against the elements. Feel the music with the Boss Audio MC900B. For further product details, please scroll down.

• Power: 500 Watts Max x 4 @4-Ohms, 94 Watts RMS x 4 @4-Ohms
• Bluetooth: You do not need a head unit. Just power up the MC900B and hook up some speakers to it. The included Bluetooth remote control lets you stream your music via your Bluetooth device and use apps like Spotify and Pandora
• Weatherproof: The MC900B has been designed to handle some light weather conditions without giving up on you. It is great for use in ATVs and boats.
• Class A\B: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range: With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• Auxiliary in: The Bluetooth remote is compatible with the audio output from smartphones as well as MP3 players. Just plug in and start playing
• USB Charging: You can charge your USB devices using the USB charging port

User questions & answers

Question:	Issue with unit sound us coming out but it is very faint sometimes. have to delete the bluetooth connection and reinstall to work again. help please
Answer:	It is not antibacterial but it is hypoallergenic.
Question:	What are the dimensions of the remote
Answer:	I buys these regularly and they are 1 liter.
Question:	Does this amp have a 12v out that can power lighted speakers
Answer:	I bought them to refill the smaller individual pumps so I don't know about the DEB dispensers
Question:	Is there any way to adjust the settings on the amp? It doesn't seem like I'm getting full power out of mine
Answer:	These are meant for commercial dispensers but I bought them to refill the smaller pumps . Pop the blue cap,off & then the ring that held it . You do need to have the small pumps for the liquid to dispense properly as the foam .

Product features

All-Terrain Amplifier

Rev up your music on land or sea with the Boss Audio MC900B Class A/B Full Range All-Terrain Amplifier. With 500 Watts Max Power this 4-Channel Amplifier is ideal for your entire audio system. It can power up your speakers, subwoofers or a combination of both. Bluetooth technology lets you stream music apps. No need for an In-Dash Head Unit to play your music. You can control it all with the Inline Multi-Function Remote. Plug into the USB Port to charge your USB-Connected devices.

Fully Marinized

High-tech, state-of-the-art waterproofing materials plus special UV coatings for plastic surfaces, coated circuit boards and connections ensure these marine and outdoor products are corrosion resistant and protected against harsh elements.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

4 Ohm Stable

4-Ohm stable meets the power-load requirements of full-range automotive speakers and most subwoofers, which predominately feature 4 ohm impedance.

Audio Streaming

Wirelessly stream audio via Bluetooth from compatible devices so you can listen to streaming music services such as Spotify and Pandora through your system.

Pre-Amp Outputs and Low Level Inputs

This unit's Pre-Amp outputs let you expand your system by adding one amp or signal processor.

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

Aux Input

The Aux Input allows you to connect to the audio output of an external device such as an MP3 Player or smartphone so you can enjoy your music through your system.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

USB Charging

Charge USB connected devices through the built-in 1A charger.

Product description

This package includes a 10-inch 1200-watt Boss subwoofer, a 10-inch Q Power slim truck subwoofer enclosure, and a Boss 1100-watt Class A/B monoblock amplifier with a remote and wiring kit. The Boss Audio 10-Inch Single Voice Coil Subwoofer is a car sub constructed with a treated paper cone and foam surround. It's great for low to medium power applications, like enjoying high-quality sounds during your commute or cranking it on your way downtown for the night. This sub can run in either a ported or sealed enclosure, which is great news for the audiophile. Use a sealed enclosure for a great, pounding bass or a ported enclosure for a solid, tight bass. The single voice coil can be powered by a matched amp to achieve a range of impedances, making it perfect for your low to medium power applications. This Q Power Single 10-Inch Sealed Car Audio Subwoofer Box Enclosure feature solid 5/8-inch MDF construction, charcoal carpet covering, terminal cup connectors, 0.9 cubic feet of air space per box, and a mounting depth of 4.75-inches. Turn your ride into a sound machine with the help of the Q Power QTW10 Single 10-Inch Sealed Car Audio Subwoofer Box Enclosures! These boxes are designed and built for the deepest bass in tight spots in your car, truck or other vehicle. You, yeah you, you need some more bump in your vehicle and the Boss Riot 1100W Monoblock Amplifier is the one that delivers the jams in your ride. As a Class A/B amplifier with a MOSFET power supply, it gives you crystal clear and crisp acoustics as you drive down the open road. It's 2-Ohm stable to produce more power and more volume and is full of features that will leave you speechless. It shows off switchable bass boost, variable gain control, a variable low-pass filter, high and low-level inputs, thermal protection, and a subwoofer level control that gives you the ability to boost the sub level when an amp or subwoofer are connected. It has a peak power of 1100 watts at 2 ohms, RMS power of 825

• Boss 1200W Subwoofer
• Single 4-ohm aluminum voice coil subwoofer
• Treated paper cone and foam surround
• Works in 0.7 cubic feet sealed or 1.3 cubic feet ported enclosure
• For ported or sealed enclosure

User questions & answers

Question:	Is everything here to hook them up soon as u get them
Answer:	I think they are cca wires based on the price. Id have to pull the wire from my amp to tell you for sure. But based off price alone id say copper clad aluminium
Question:	What are the dimensions of the box
Answer:	Cca id say just off of price
Question:	Does the amp fit in the box housing along with the sub
Answer:	Yes you can i have mine on a skar 2000.watt amp that dynoed just above 2500 watts and i have no issues
Question:	How long is the power cord
Answer:	cca wire