4 best boss audio home theater subwoofers

Boss Audio Systems offers a range of home theater subwoofers designed to enhance the audio experience in your home entertainment setup. These subwoofers are typically categorized as component subwoofers and are focused on reproducing low-frequency bass for a more immersive sound.Here's what you need to know about Boss Audio home theater subwoofers:

  1. Component Subwoofers: Boss Audio home theater subwoofers are part of a larger audio system and are dedicated to delivering deep and powerful bass in your home theater setup.

  2. Size Options: These subwoofers come in various sizes, including 8-inch, 10-inch, 12-inch, and larger options. The choice of size can impact the overall bass output and how well it integrates with your existing speakers.

  3. Power Handling: Boss Audio home theater subwoofers are rated for power handling, which indicates the maximum amount of power they can handle without distortion. It's important to match the subwoofer's power handling capabilities with your AV receiver or amplifier for optimal performance.

  4. Cone Material: The subwoofer's cone material is designed for durability and sound quality. Common materials include polypropylene and other reinforced materials that can withstand the demands of home theater audio.

  5. Voice Coils: Some Boss Audio subwoofers feature dual voice coils, which can provide greater flexibility in wiring and configuring your home theater system.

  6. Sensitivity: Sensitivity ratings indicate how efficiently a subwoofer converts power into sound. A higher sensitivity rating generally means greater efficiency, resulting in louder and cleaner bass output.

  7. Enclosure Type: To maximize performance, Boss Audio home theater subwoofers are typically installed in specific types of enclosures, such as sealed or ported enclosures. The choice of enclosure type can significantly affect the bass response and sound quality.

  8. Frequency Response: The frequency response of these subwoofers indicates the range of bass frequencies they can reproduce. A wider frequency response allows for more versatility and dynamic bass output.

  9. Connection Options: Boss Audio subwoofers typically offer various connectivity options, including speaker-level and line-level inputs. This ensures compatibility with a wide range of AV receivers and amplifiers.

  10. Additional Features: Depending on the model, some Boss Audio home theater subwoofers may come with extra features like adjustable crossover settings, phase controls, and auto power-on/off functions for added convenience and customization.

When selecting a Boss Audio home theater subwoofer, it's essential to consider your specific home theater setup, including your AV receiver's capabilities and the room's acoustics. Properly integrating the subwoofer with your existing speakers and configuring settings to match your preferences will help you achieve a more immersive and impactful home theater audio experience.

Below you can find our editor's choice of the best boss audio home theater subwoofers on the market
  

BOSS Audio Systems CE15DVC 2400 Watts15-Inch Dual 4 Ohm Voice Coil Subwoofer

BOSS Audio Systems

Based on 2 reviews Check latest price

Product description

15"" Dual 4 Ohm Voice Coil Subwoofer, Color Chrome-Treated Poly Injection Cone, 2400 Watts

  • Power Handling (peak) 2400W
  • Power Handling (RMS) 1200W
  • Impedance - Dual 4 OHMS
  • Frequency Response - 26Hz-1.2KHz
  • Voice Coil - 2-Inch

Product features

3 year platinum dealer warranty

Specifications

Break Your Subwoofer In

Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

Cone – Poly Injection

A substance called “Polyurethane” and is categorized as a “Polymer". It is a resilient and durable manufactured material that can take the place of paint, cotton, rubber, metal or wood in thousands of applications across virtually all fields. It can be hard like fiberglass, squishy like upholstery foam, protective like varnish, bouncy like rubber or sticky like glue.

In the specific case of our cones, this material allows for maximum give that produces great sounding speakers lasting you a long, long time.

Surround – Butyl Rubber

Butyl Rubber is a synthetic (man made) rubber and is valued for its chemical inertness, impermeability to air and the ability to endure or resist exposure to the many types of weather fronts. Butyl rubber has many different applications. Anywhere from Sports equipment to automotive parts, the medical industry and more. We use them for the Surrounds that connect the cone to the basket.

Did you know that most modern chewing gum uses food-grade butyl rubber as the central gum base, which contributes not only the gum's elasticity but an obstinate, sticky quality?

Just like that chewing gum, the Butyl Rubber Surround in our speakers can take the equivalent amount of abuse without quitting on you.

Voice Coil – Aluminum

One of the most abundant elements on earth, Aluminum is remarkable for its low density and for its ability to resist corrosion. It is nonmagnetic (does not have any magnetic properties) and does not easily ignite. This solid material has the ability to perform under stress in both high tension and high compression environments. Aluminum is relatively soft making one of the more ideal materials to use in voice coils.

Boss Audio Systems RS80 800-Watt 8-Inch Low Profile Amplified Subwoofer with Remote Level Control

BOSS Audio Systems

Based on 3 reviews Check latest price

Product description

8" Round Car Low Profile Amplified Subwoofer with Remote Subwoofer Level Control, 800 Watts / RMS Power: 400 Watts @ 4

  • RCA Low Level Input
  • High Level Input
  • Green & Red LED Power Status Indicator
  • Phase Selector Switch: 0 or 180 Degree
  • Adjustable Input Sensitivity: 0.2V to 6V

Product features

3 YEAR PLATINUM DEALER WARRANTY

GENERAL FEATURES

MOSFET PWM (Pulse Width Modulated) Power Supply

Metal–Oxide–Semiconductor Field-Effect Transistor is a transistor used for amplifying or switching electronic signals.

We use it in billions of them. In our computers, our telephones, game consoles, cars, electrical appliances and in this case, our Amplifiers. They are found in systems where information is processed or stored.

A MOSFET is basically an electrical switch that allows the flow of electrical current.

An electrical switch has two possible states, ON or OFF. This is where the MOSFET performs its most important role in our D Class amplifiers by allowing or preventing the flow of power and creating an efficient amplifier.

The “Pulse Width Modulated” is a design that is significantly simplifies power supplies.

It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry.

The PWM can increase efficiency, is lighter, smaller, can reduce total cost, productivity and system reliability.

Low And High Level Inputs

The RS80 has two different ways that you can hook up a receiver to it.

One is called Low level input and the other is called High level input.

A low level input is measured in voltages. It comes in the form of RCA outputs from the back of your receiver and goes to the RCA inputs on the RS80.

A high level input is measured in watts. It comes in the form one positive and one negative wire from the back of your receiver to and goes to the input terminal of your amplified subwoofer in the same wire form.

Low-level (RCA) input wiring is preferred for best audio performance. Always use a high-quality RCA cable for best audio performance.

Phase Selector Switch

So this switch is basically to keep all of your speakers and subwoofers in the same “Phase”.

If for example, you have the RS80 in the trunk or under your seat, and the bass is out of phase with the main (right and left) loudspeakers then you will likely get poorer quality bass.

Switch your phase selector one way or the other and whichever way gives the best bass should do it.

Adjustable Input Sensitivity

Properly setting the gain on your RS80 is key to getting great sound out of it.

The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.

If you set it too high, you are introducing distortion into the sound. But if you set it too low, then you are choking back on what it is there to do in the first place.

Here is a technique that works on most amplifiers.

First, turn the amplifier’s gain all the way down. Then go up front and put on some music. Now crank the stereos volume until you hear distortion. Then back it off until the distortion goes away.

Go to your amplifier and turn the gain up until the distortion comes back. Then once again, back off until the distortion goes way.

And you are done!

Variable Bass Boost

You have Bass Boost and Variable Bass Boost.

The difference between the two is that with Bass Boost you either have extra bass or you don’t. But with Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).

And this is what you get with the RS80. Variable Bass Boost.

Variable Subsonic Filter

Subwoofers start to bottom out trying to reproduce low-frequency signals that are below their abilities to sound off. Bottoming out is more a mechanical problem and happens when the subwoofer driver reaches the limit of its excursion and creates a clacking or flapping sound instead of the low frequency entering its voice coils. If your sub is bottoming out, short of changing the driver into one that has better low-frequency handling, you can try making adjustments to the subsonic filter to filter out frequencies below its specified low frequency limits.

Low Pass Filter

A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter, set at 100 Hz for example, will block the notes above 100 Hz and allow those under that to pass. Low-pass filters are primarily used to keep high notes from subwoofers.

BOSS Audio Systems CXX104DVC Car Subwoofer - 1000 Watts Maximum Power, 10 Inch, Dual 4 Ohm Voice Coil, Sold Individually

BOSS Audio Systems

Based on 10 reviews Check latest price
  • Cone - Made from Polypropylene, the CXX104DVC 10-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long-lasting subwoofers
  • Voice Coil - Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material, gives our speakers the advantage of longer pay times with lower weights
  • Surround - We use rubber in a lot of our subwoofers. It has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, with no wear & tear
  • Basket - A stamped basket can absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures
  • Specs - Resonant frequency: 42 Hz, Sensitivity SPL (1W/1m): 83 Db, Impedance: 4 Ohms, Port frequency: 20 kHz, Dimensions: 8.5” x 8.5” x 4”, Mounting Depth: 3.4”, Mounting hole: 8.8” x 6”, Weight: 7.2 Lbs.
  • Warranty - BOSS Audio Systems provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

BOSS Audio Systems CXX8 8 Inch Car Subwoofer - 600 Watts Maximum Power, Single 4 Ohm Voice Coil, Easy Mounting, Sold Individually

BOSS Audio Systems

Based on 3 reviews Check latest price

Product description

With extreme looks and bass output, The CXX8 8" Chaos extreme Series single voice coil subwoofer from BOSS Audio is the stylish upgrade to your car's audio system with super-clear lows. With a metallic Black finish that accents any interior and impressive 600 watts of power handling, the CXX8 produces both looks and sound that stand out above the rest.

  • Cone - Made from Polypropylene, The CXX8 8 Inch Car Subwoofer Provides a Resilient and Durable Material That Can Offer Great Sound with The Advantage of a Long-Lasting Subwoofer
  • Surround - Rubber has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear
  • Stamped Basket - A stamped basket can absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures.
  • Voice Coil - Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material gives our speakers the advantage of longer pay times with lower weights
  • Specs - Resonant Frequency: 49 Hz, Sensitivity SPL (1W/1m): 83 Db, Dimensions: 8. 25” x 8. 25” x 4. 3”
  • - BOSS Audio Systems provides a powerful 3-year platinum online dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question: Can you run this with out a box and how tall is the sub
Answer: Yes it does come with the amp.
Question: This is only one sub right? Or two
Answer: 1100
Question: will this fit in my 06 honda civic, sone models come with subwoofers made in the rear window and mine happen to be one but my woofer is busted
Answer: No this is a monoblock only 1 but it is very powerful I bought Just the amp for my wife and then got a single 12 inch 1000 watt boss sub and box hits so hard sounds great she loves it I highly recommend this amp for a single sub but not 2 subs
Question: Can this sub replace the OEM sub to a 2002 yukon
Answer: We have a sealed box. Works how we want.

Product features

Break Your Subwoofer In

Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to.

This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure.

The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

Cone

Polypropylene is a resilient and durable manufactured material that can be used in thousands of applications across virtually all fields. In the specific case of our cones, this material allows for maximum give that produces great sounding speakers lasting you a long time.

Voice Coil

Our speakers are capable of higher or elevated temperature strength and fatigue properties that will increase performance and efficiency of heavy duty play time through lower weight and higher operating temperatures.

Basket

The stamped basket offers a strong and rigid platform allowing the listener to hear clean and clear music output.

Surround

Impermeable to air, rubber has the ability to endure or resist exposure to the many types of weather fronts. Rubber has many different applications. We use it for the surrounds in a many of our speakers to connect the cone to the basket.

Latest Reviews

View all