5 best boss amplifier for subwoofers

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

Kick your Bass into high gear with the Boss Audio Armor AR4000D Class D Monoblock Amplifier. This powerful 1-Ohm stable Amplifier features 4000 Watts Max Power with a MOSFET power supply to get your tunes rocking. Customize the sound with Variable Low Pass Crossover, Bass Boost and Subsonic Filter. Maximize the Bass with the Remote Subwoofer Control. For double the performance and power, strap on another AR4000D for a total power of 8,000 Watts @2-Ohms. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience. Give power to your playlists with the Boss Audio AR4000D. For further product details, please scroll down.

• Power - 4000 Watts Max x 1 @1-Ohm, 2000 Watts Max x 1 @2-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• Strapping Capable - You are able to strap two AR4000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
• Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

User questions & answers

Question:	Can i use this with a single ground zero 1000w gzrw 15d4 subwoofer at 4ohms? or should i wire it to a 2 ohm final impedance
Answer:	Hello, The AR4000D provides ample power for your subwoofer. A dual voice coil subwoofer should be wired to provide an impedance of 2 Ohms. Thank you!
Question:	Can this amp push 2 kicker 12" solo baric l7 they each are 2 ohms
Answer:	Definitely. I have one hooked up to 2 Rockford Fosgate 12" P3's and it pushes them really nice.
Question:	Can this amp push 2 15” power acoustic subs
Answer:	Depends,,,what's the RMS on the speakers? This amp puts out at best 400 n change. And that's at 14 watts . so if ur sub's r say 200 RMS or less then I would say yes it will push them. This is a good little amp. Especially for the price. In my ride Its pushing 1 dual coil 12 in sub very nicely.... And its a china sub lol
Question:	Will this amp power 2 soundqubed HDC3 10in subs
Answer:	hdC's? Wow, I dunno what 87 chevycaprice is talkin bout, I'm going to take a safe guess that, (Since you failed to include the specs for the Soundqubed Comp series) he assumed that "it's just another 10" sub, how many 10" subs require astronomical amounts of RMS wattage just to get a slight amount of movement?" & I spose in most 10" subwoofer configurations he'd be right. I however own a 15" HDS3.1 Soundqubed sub, (S- standing for STREET series, meaning it's simply meant to be a daily driver where as w/yours, the C- stands for Comp or competition series) I've had my HDS for over a yr & have already chose to upgrade amps twice due to lack of sufficient power even at a 1ohm load. For the HDS, regardless of weather it's a 10"/12"/15", they ALL require you to feed them AT LEAST their Rated 1200RMS If you want them to even BEGIN to sound as good as they truly can sound...& For just a daily driver series, they're stiffer than a 15yr old pimple faced virgin boy working as a camera man on a Bonnie Rotten porn shoot! Even after pushin 5 months w/an ORION Cobalt 2500.1D @ full tilt, then stepping up to Orion 3500.1D @ full tilt, & now, just over a year into my sub break in process, being powered by a Power Acoustiks RZR 3500.1 at full tilt..... my subs still nearly too stiff for me to even move the cone/spider by hand.... so, although I don't remember off the top of my head the RMS rating of the HDC series I'm quite certain it's AT LEAST 2000 or more... & Oddly enough I can give you a review of this series of BOSS Amps since my previous system was 2JBL 12"s powerd BY an Armor 1500 wired to 2ohm... I don't have anything bad to say necessarily, considering it's a budget Amplifier series built by a budget audio Company, Dollar per watt, the Armor1500 I had would make even the pickiest audiophile smile, if even just slightly. However, I sold that set up B4 havin a chance to clamp test it for absolute clarification, but I've been building, wiring/setting up systems for just under 20 yrs now & I can say with out question they are a fairy tale away from making even close to their spec ratings! I assume you're browsing the BOSS AUDIO Amps cuz budget issues? If I'm wrong bout this assumption & u didnt get your HDC as a gift but w/ your own scratch....then I truly believe, & honestly hope that you'll save your $ & purchase something that will allow that HDC to do what it's meant to do.... It'll blow minds & eardrums I assure you of that! I'm gonna make one suggestion to you & as long as you haven't already purchased an amp I truly hope you'll trust my advice! Look at the Orion XTR1500.1 or 2500.1 dependin on ur RMS rating! I know it'll run you an extra $150-$200 more than this BOSS Amp but I PROMISE you, it'll bring your HDC to the record breaking level of "COMPETITION" that the "C" in its name stands for & you'll NVR regret I can promise you that.! Hope this will help guide you to glory! Lol good luck enjoy that HDC

Product features

Performance Power

Ramp up your vehicle's Bass with the Boss Audio Armor AR4000D Class D Monoblock Amplifier. With 4000 Watts Max Power and MOSFET power supply, this Amplifier packs an audio punch. Customize the sound with Variable Low Pass Crossover, Bass Boost, Subsonic Filter and Remote Subwoofer Control. Strap this Amplifier to another AR4000D for double the performance. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience.

Class D and MOSFET

Class-D amps run more efficiently and generate more power using a more compact design.

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Strapping Capability and 1 Ohm Stable

Strap two amplifiers together to get double the power at an impedance of 2-Ohms.

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter and Subsonic Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Low Level Inputs and Variable Input Control

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Phase Control

Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up 'out of phase'.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

• Power - 300 Watts Max x 4 @2-Ohms, 150 Watts Max x 4 @4-Ohms, 600 Watts Max x 2 Bridged @4 Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
• Fixed High-Pass Crossover - Speakers reproduce sound based on high, low or mid-range frequencies. The High-Pass Crossover gears specifically towards “highs” such as all size speakers including mid ranges and tweeters
• Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels

User questions & answers

Question:	will this amp power 2 6x9 500 watt door speakers and 2 rear pillar speakers
Answer:	Yes, it fits for them
Question:	Can you support two 10" subs with this one amp
Answer:	I've used mine on the eyepiece of my Nikon 8x42 prostaff binoculars. Unless the eyepiece on the Yukon is huge, it will likely work. Have used with a Samsung s6 and Motorola z3.
Question:	Can you hook 4 speakers and a sub to this amp? Or just 4 speakers and I'd need a separate one for the sub? Thanks in advance
Answer:	It refers to your phone sizes
Question:	whats rhe size of the amplifier
Answer:	I couldn't get my Samsung S7 Active in tight enough to get rid of serious vignetting (Darkening around the edges and corners, Tunnel effect) Returned it

Product description

Take your audio power up a notch with the BOSS Audio Armor AR1500M Class A/B monoblock amplifier. This powerful 2-ohm stable amplifier features 1500 Watts Max power with a MOSFET power supply to kick start your music. Customize the sound with variable low pass Crossover and bass boost. Max out the bass range and rock your vehicle with the remote subwoofer control. The Armor Series of amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience. Boost your music's bass with the BOSS Audio ar1500m





for further product details, please scroll down.

• POWER: Maximum Power Output of 1500 Watts at 2 Ohms into one channel. MAX Power Output of 750 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the AR1500M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AR1500M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• SWITCHABLE BASS BOOST: Switchable Bass Boost allows you to boost the low bass +18db.
• DIMENSIONS: The AR1500M is 10.3 inches in Depth, 6.5 inches in Width and 2.6 inches in Height. It can be installed in a variety of different places due to its’ slim and compact design
• WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com

User questions & answers

Question:	Viene incluido con el controlador de subwoofer
Answer:	Si viene completo, lo trae como con 15 pies de cable para que lo puedas traer hasta adelante
Question:	im using my factory stereo, do i need a specific high/low converter for this Amp? if so, which one
Answer:	For my factory radio I used the PAC line output converter and tapped the factory lines going to my rear right and rear left speaker. The RCA cables then run from the output converter to the amp
Question:	Can this amp run 2 kenwood kfc-w3016ps 12-inch 2000w
Answer:	You should always verify the RMS, but I doubt it. Kenwood is a decent company, so the RMS is probably at least half their max stated Watts. This and will likely only put out a stable 1200 on a good day, which falls 800 short of my estimated draw from 2 of those speakers.
Question:	will this work on 2 12'' Pyle PLBW124 1,200-Watt DVC Subwoofer
Answer:	Yes, I am running 2 of the PLBW12 - 1600 watt 4ohm DVC subs with this Amp set in a series-parallel wiring configuration, which keeps everything stable @4ohms and it sounds phenomenal..

Product features

Slim Design

Get pure bass with the Boss Audio Armor AR1500M Class A/B Monoblock Amplifier. With 1500 Watts Max Power and MOSFET power supply, you'll feel every beat. Customize the sound with Variable Low Pass Crossover, Switchable Bass Boost and Remote Subwoofer Control. The Armor Series of amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Product description

Package includes: 2 Boss 12" Car Subwoofers 1 Boss Mono Amplifier 1 Amplifier Installation Kit Give your car's audio system extra bump with these Boss CX122 Subwoofers. Offering a 1400 watt max and a 700 watt RMS per sub, these Boss CX122 subs have a heavy stamped steel frame, single 4 Ohm voice coils and a custom tooled injected cone. The Boss CX122 subs have a mounting depth of 5.4" and are 12". The **Boss AR1500M** MONO class a/b amplifier features a MAX power of 1500 watts and a RMS power of 700 watts at 4 ohm. Other features include a MOSFET power supply, class A/B circuitry, 2 ohm stable and a low pass crossover. Also, includes a remote bass control. The BOSS AR1500M amplifier is the perfect amp to power your car audio system! Amplifier installation kit included!

• **Subwoofers:**
• NEW PAIR BOSS AUDIO CHAOS 12" 2800 WATT Car Subwoofers
• 1400 Watt MAX (2800 Watt PAIR)
• 700 Watt RMS (1400 Watt PAIR)
• Heavy Stamped Steel Frame

User questions & answers

Question:	I just recieved my package and there is no subwoofers
Answer:	You need review your order again, if it's okay so call Amazon and let them know something is missing.
Question:	Does this fit 07 Subaru Impreza
Answer:	Im sure it would it fits nicely in my truck
Question:	I just got my kit in the mail, will the one amp will run both subs and i did not see the wire from the amp to the speckers
Answer:	The one amp will run both speaker it's a mono block amp so there will be only 2 terminal on the amp for speaker (+) (-)....unfortunately the kit comes with everything except for speaker wire
Question:	Will this fit a 2008 mission titan crew cab
Answer:	Yes