14 best 18 subwoofer for car

Product description

The Skar Audio EVL-18 D4 18" dual 4-ohm subwoofer redefines the conception of low-end sound reproduction. The engineering that went into developing the EVL series is simply amazing, and it shows in the sound quality and performance that this subwoofer demonstrates. The EVL Series can deliver incredibly accurate and powerful bass, due to a variety of advanced design features that make this subwoofer unique and in a class of its own. Conservatively rated at 2,500 watts peak power, the EVL-18 D4 features a massive high flux, double stack ferrite motor structure - which delivers the driving force behind the tremoring lows this subwoofer can produce. Combine the motor with the black coated 3" high temperature voice coil of this driver, as well as the advanced air flow cooling design of the basket, and it quickly becomes evident why this woofer is capable of being played at the highest levels of output for hours on end. Furthermore, the high roll foam surround incorporated into the design of this subwoofer is one of the reasons it can produce those ultra-low-end frequencies with such responsiveness. The suspension design of this subwoofer features the EVL's signature red, single damper, two-layer spider - which connects to the coil former with premium stitched lead wires. All these incredible features make this EVL subwoofer the unequivocal choice when looking for a high-quality car subwoofer. Dual 4-ohm voice coil impedance, Peak Power: 2,500 Watts, RMS Power: 1,250 Watts, Frequency Response: 20-300 Hz, Sensitivity: 87.0 dB Fs: 38 Hz, Xmax: 23.5mm (one-way). Subwoofer Mounting Depth: 10.10", Subwoofer Cut-Out Diameter: 16.75

• Peak Power: 2,500 Watts | RMS Power: 1,250 Watts
• 3" High Temperature Dual 4-ohm Voice Coil with Black Coating
• Competition Grade Paper Cone & High Roll Foam Surround | Fs: 38 Hz
• Premium Suspension Featuring the EVL Series Signature Red Two Layer Spider
• Sensitivity (SPL): 87.0 dB, Frequency Response: 20 - 300 Hz

User questions & answers

Question:	Do they hit hard cause i gotta battle and my lanzar blew my 18's
Answer:	Yes the do but is 18’s you only want? The vxf sub hits even harder and I think you can get that in a 18”
Question:	How manny watts at 2 ohm
Answer:	Depends on size of evl 10 inch 12 inch 15 inch 18 inch run 1200 watts rms the 6.5 runs around 150 watts rms
Question:	can i use thi spkr to my 8ohms power amp
Answer:	It depends on what amp you have. I know this answer is 3 years late, but don’t just plug it in until you read your amps specifications because the amp must be able to drive those ohms
Question:	Can this handle more power than what it’s rated? because i have a dd 4000 watt
Answer:	I'm sure it's not nearly 4k watts and if so just make sure it clean power and you'll hear distortion after about 1500rms I would say, I run a rp3500 to them and it take it all day which the amp claims like 4400...

Product features

Product Specifications

• Dual 4 Ohm Voice Coil Configuration
• Peak Power: 2500 Watts
• RMS Power: 1250 Watts
• Competition Grade Pressed Paper Cone
• 3" High Temperature CCAW Voice Coil
• Frequency Response: 20 Hz - 250 Hz
• Sensitivity: 87 dB
• Xmax: 23.5 mm
• Mounting Depth: 10.10"

• Harmony Audio HA-ML182 Monolith 18" Competition SPL Sub 3500W Dual 2 Ohm Subwoofer

User questions & answers

Question:	Any review on this subwoofer
Answer:	These subs are beast. There basically the skar zvx subs. Same motor same build pretty much almost like sundown but built just like skars.
Question:	Does come in a pair or just one
Answer:	Just one
Question:	What kind of single sub box/amplifier and 4 (6.5) door speakers can i use for this subwoofer and setup in a 06 chevy Silverado crew cab
Answer:	First it depends if your truck seats lift. If they do I would suggest a slotted port box. Box would be about 4.12cubic ft. Port area 2 1/2 inch by the length of the side of the box. I got the HA-ML181 still at 1 ohm on a cheap planet audio 5k and the amp only puts out 3100watts. So I wouldn’t go with a off brand amp. For door speaker Rockford Fosgate has some pretty good sound to them. Just a heads up these subs can take a beating and it can give 1 back.
Question:	Can I run two of these off of my 2 channel amp, and will I need to jump one side to the other
Answer:	Ya Just make sure it’s enough to push em. I’m running a 8000 watt amp on 2 12s. 4000 rms 2000 watts apiece 2 channel and that bitch slaps. Hella window flex with em if u do the right box. Got a 250 amp altanator 0 gage wire all around and two yellow tops in back with one under hood.

Product features

Leading The Way

Why do all Harmony Audio subs feature interwoven tinsel leads? The answer is simple we demand nothing but the best. A tinsel lead is a small wire that connects the voice coil to the input terminal and if you look at most other subs its positioned so when the subwoofer is playing the cone will actually slap into the leads creating a pop noise when playing. The advantage to an interwoven tinsel leads is both increased durability and performance which is what Harmony Audio is all about.

Keeping things cool

The greatest enemy of a car audio subwoofer is heat which needs to be quickly dissipated for a sub perform correctly and is crucial to prolong the life of the subwoofer. Harmony Audio Rhythm, Alloy, Carbon & Monolith series subs feature large slotted vents directly under the spider which allows cool air to quickly reach all the sensitive components. The Flatline series features a unique fin-shaped heatsink that transfers heat away from the voice coil.

Connecting it all together

Cutting corners is not the Harmony Audio way and while other manufacturers may be cutting out features to save a penny we are focused on producing a superior performing subwoofer. Take the wire terminal for instance probably one of the most important features of the sub which is what handles the power transfer from your amp to the sub. Many other brands now use a cheap spade terminal that takes longer to install and who knows if it will even stay connected once installed. All Harmony Audio subs feature a spring-loaded push terminal that will accept direct speaker wire ensuring the ultimate connection and power transfer.

Specifications

• Voice Coil Diameter: 76.5mm
• Voice Coil Height: 64.7mm
• HE Magnetic Gap Height: 20mm
• Voice Coil Bobbin: Black Aluminum
• Xmax: 22.35mm
• Magnet Layers: 8
• Cms (Suspension Compliance): 0.041
• Qms (Mechanical Q Factor): 5.33
• Qes (Electrical Q Factor): 0.67
• Qts (Total Q Factor): 0.59

Detailed Specifications

• Voice Coil Diameter: 76.5mm
• Voice Coil Height: 64.7mm
• HE Magnetic Gap Height: 20mm
• Voice Coil Bobbin: Black Aluminum
• Xmax: 22.35mm
• Magnet Layers: 8
• Cms (Suspension Compliance): 0.043
• Qms (Mechanical Q Factor): 6.83
• Qes (Electrical Q Factor): 0.73
• Qts (Total Q Factor): 0.66

Features

• Competition Grade Paper Cone
• Stitched High Roll Foam Surround
• Tinsel Leads Woven into Spider
• Die-Cast Aluminum Basket
• High Flux Ferrite Magnet

Product description

The Skar Audio SDR-18 D2 was designed to offer the Ultra low end bass Frequency response Only capable of being produced by a larger subwoofer of this size. Featuring a conservative rating of 1, 200 watts Max power, This 18 inch car subwoofer does just that, thanks to it's high temperature 2.5-Inch copper voice coil and high flux ferrite motor. When looking for a subwoofer that delivers low end frequencies with authority, look no further. This is the perfect solution for a 600-1, 200 Watt daily driver that can handle whatever is thrown at it, offering unmatched reliability and sound quality. Featuring a sleek and attractive red spider system, paired with its competition grade paper cone and High Roll foam surround, this subwoofer is going to impress the listener every time It is playing. Frequency response: 18 Hz - 250 Hz, Fs: 24 Hz, Sensitivity (SPL): 87.3 dB, re: 1.9 ohms, mix: 13.5mm one-way. Dual 2-ohm voice coil configuration.

• 18-Inch Dual 2-ohm Car Subwoofer
• Peak Power: 1,200 Watts | RMS Power: 600 Watts
• 2.5" 4-Layer High Temperature Copper Voice Coil
• High Roll Foam Surround and Competition Grade Pressed Paper Cone
• Frequency Response Range: 18 Hz - 250 Hz | Sensitivity: 87.3 dB
• High Flux Ferrite Motor | Advanced Air Flow Cooling Design

User questions & answers

Question:	Im looking to buy 4 of these 18 , needing specs for best ported encloser
Answer:	Skar recommends 4.6 cubes each tuned at 32hz
Question:	What is the recommended air space for a sealed enclosure for the sdr18 -d
Answer:	When I built my box I searched sdr 18 specs. It pulls up skar website in search results. Click the link and you'll find that skar provides all enclosure specs on their website. Enclosed and ported.

Product features

Technical Specifications

• Dual 2 Ohm Voice Coil Configuration
• Peak Power: 1200 Watts
• RMS Power: 600 Watts
• Competition Grade Pressed Paper Cone
• 2.5" High Temperature Copper Voice Coil
• Frequency Response: 18 Hz - 250 Hz
• Sensitivity: 87.3 dB
• Xmax: 13.5 mm
• Mounting Depth: 8.00"

Product description

Skar Audio designed SDR-1X18D2 loaded Subwoofer Enclosure package for those who seek ultimate performance in subwoofer-bass fidelity. This package offers a simplified option to add a competition-grade subwoofer system, without the guesswork involved in designing it from scratch. This loaded enclosure features one of our massive SDR-18 D2 1, 200 watt max power 18-Inch subwoofers, which arrives pre-loaded and wired up inside of the custom single 18" Vented enclosure. We also Include the perfect amplifier in this package to power your new subwoofer with the Skar Audio RP-800.1D, which comes with a premium Skar Audio 4 gauge amplifier wiring kit To make installing the system hassle free. This custom enclosure used in this package was engineered by Skar Audio specifically for the subwoofer that is loaded in It, ensuring perfect sound and compatibility. Every subwoofer is different, and it is so critical when buying a subwoofer to ensure that the subwoofer and enclosure are an ideal match, or you will lose sound quality and output. The enclosure features a unique kerf port design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box. The subwoofer comes pre-wired and loaded inside of the enclosure allowing for an easy and hassle free installation. The dual 2-ohm subwoofer is wired up inside of the enclosure so that the final Impedance Load is configured for 1-ohm at the terminals. Peak power: 1, 200 watts, RMS power: 600 watts.

• All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
• Peak Power: 1,200 Watts | RMS Power: 600 Watts
• Includes x1 Skar Audio SDR-1X18D2 Single 18" Loaded 1,200 Watt Vented Subwoofer Enclosure
• Includes x1 Skar Audio RP-800.1D Class D 800 Watt Mono-block Amplifier
• Includes x1 Skar Audio SKAR4ANL-CCA 4 Gauge Complete Amplifier Wiring Kit
• High Performance Aftermarket Subwoofer System | Easy to Install

User questions & answers

Question:	What are the best amplifier settings for the 18-in version
Answer:	All settings are different from one genre to the next. For example, i absolutely hate just bass. Thats like going to a concert and the only person who shows up is the drummer...kinda stupid to listen to one sound all god damn day. I run 500 rms through a 1500 watt sub on factory settings. I run all my component speakers from my head unit and it fits great with rock and country.

Product features

Product Specifications

• Includes Subwoofer Pre-Loaded Into Subwoofer Enclosure
• Skar Audio SDR-18 D2 - 18" Dual 2 Ohm Subwoofer
• Peak Power: 1,200 Watts
• RMS Power: 600 Watts
• Frequency Response: 18 - 250 Hz
• 2.5" High Temperature Copper Voice Coil

Skar Audio RP-800.1D Monoblock amplifier

• Max Power @ 1 Ohm: 1,200 Watts x 1 Channel (14.4v)
• RMS Power @ 1 Ohm: 810 Watts x 1 Channel (14.4v)
• Working Voltage: 8.5V - 14.4V
• 4 Gauge Power and Ground Terminals
• MOSFET Power Supply
• Remote Bass Knob & Wire Included
• 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC
• Fuse Rating: 80 Amp
• Dimensions: 11.75" (Length) x 6.25" (Width) x 2.25" (Height)

Product description

Skar Audio engineered the SDR-1X18D2 single 18-inch loaded vented subwoofer enclosure as a simplified option to add a competition-grade subwoofer system, without the guesswork involved in designing it from scratch. This loaded enclosure features one of our massive SDR-18 D2 1,200 watt max power 18-inch subwoofers, which arrives pre-loaded and wired up inside of the custom single 18" vented enclosure. The enclosure features a unique kerf port design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box. This enclosure was engineered by Skar Audio specifically for the subwoofer that is loaded in it, ensuring perfect sound and compatibility. Every subwoofer is different, and it is so critical when buying a subwoofer to ensure that the subwoofer and enclosure are an ideal match, or you will lose sound quality and output. With this loaded subwoofer enclosure model, all of those concerns are eliminated, making it easier than ever to add powerful aftermarket bass to your vehicle. The subwoofer comes pre-wired and loaded inside of the enclosure allowing for an easy and hassle free installation. The dual 2-ohm subwoofer is wired up inside of the enclosure so that the final impedance load is configured for 1-ohm at the terminals. Peak Power: 1,200 Watts, RMS Power: 600 Watts. Loaded Subwoofer Enclosure Dimensions: Width: 25.75", Depth #1: 23.50" (Bottom Depth), Depth #2: 19.75" (Top Depth), Height: 21.50".

• SDR Series Single 18-Inch Dual 2-ohm Loaded Subwoofer Enclosure
• Peak Power: 1,200 Watts, RMS Power: 600 Watts
• Pre-wired Internally for a 1 Ohm Final Impedance Load at the Terminals for an Easy Installation
• Premium Vented Enclosure Made of High Strength MDF and Finished in Black Carpeting
• Double Front Baffle (1.25") with Countersunk Subwoofer Design for Flush and Attractive Appearance

User questions & answers

Question:	Can this sub be ran at 4 ohms
Answer:	Sure you just have to rewire it internally. I have mine wired for 4 ohm. Positive from amp (or box side terminal) to positive of voice coil 1, negative of voice coil 1 to positive of voice coil 2, negative of voice coil 2 to negative on amp (or box side terminal). Search Google images for: "One 2-ohm DVC sub, bridged 2-channel amp: 4 ohm load" (for visual instructions).
Question:	What size amp and gauge wire would be good for the
Answer:	600 watt moon amp and 4 gauge
Question:	Would I be able to run two of these on one amp
Answer:	Sure could if you've got it wired right and have enough power from your amp.
Question:	Can this fit in 2002 Chevy Silverado extended cab
Answer:	Yes it fits on my back seat w/ passenger seat moved forward a little bit .2003 silverado ext.cab same trucks pretty much.

Product features

Product Specifications

• Includes Subwoofer Pre-Loaded Into Subwoofer Enclosure
• Skar Audio SDR-18 D2 - 18" Dual 2 Ohm Subwoofer
• Peak Power: 1,200 Watts
• RMS Power: 600 Watts
• Frequency Response: 18 - 250 Hz
• 2.5" High Temperature Copper Voice Coil

Product description

The Team Series is by far our largest subwoofer that we offer weighing in at at nearly 138 lbs for the 18! We understand that you don't want all that weight for no reason so lets tell you a little bit about this monster!!

The Team Series boasts a Quad stack Y35 280mm motor structure which utilizes an optimal shorting ring, pole cap, and venting through the bottom plate and pole. The 4” 8 Layer Flatwound aluminum coil made in the USA with nearly a 4” winding height utilizes eight 10” Nomex Progressive spiders paired with a mega roll surround to allow for extreme power handling and excursion!

The Team series sub: 18 inch

-Conservatively rated 5,000 RMS(tested on nearly 7500 RMS without any issues)

-4" 8 layer flatwound aluminum coil with nearly a 4" winding height made in the US.

-8 stacked 10" nomex progressive spiders with XL triple tinsels

-Quad stack FEA optimized motor with shorting ring and pole cap

-4 gauge terminals

-Available in 15" Dual 1 Ohm

SPECS

RMS: 5000

SPL: 91.1 dB

FMS: 25.5 Hz

BL: 21.3

Res: 227.1

Re: 2.0

Qms: 5.50

Qes: 0.32

Qts: 0.30

Rms: 13.3 kg/s Cms: 0.09 mm/N

Mms: 454.4 gr

Nref: 0.81%

VAS: 162.3 L

Rp: 34.2

Lp: 43.8 mH

Cp: 1081.4 uF

Le: 2.27 mH

Xmax: 38



BOX HEALTHY RECOMMENDATION



Every vehicles applications, equipment, tuning, wiring, ext all play a factor in making sure your woofers are playing clean signals to avoid any clipping. Our products have the reputation of taking some of the most abuse in the industry for its given power rating, but to ensure the longevity using the right air space and scoping for a clean signal will be sure to have a lasting daily resilient subwoofer.

Suggested Healthy spec range.Rule of thumb lean towards smaller enclousre if clamping @ or more than conservative power. Lean towards bigger enclosure clamping below conservative power

Ported enclosure 4.5ft-6.5ft tuned 35hertz / 12-16sqaure inch of port area

Product description

If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal. Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.

• ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
• HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
• MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
• AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
• SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches

User questions & answers

Question:	Will this fit a 2011 dodge avanger
Answer:	Yes
Question:	Will this work in my 2006 chevy equinox
Answer:	Yes if you have aftermarket radio or the adapter to hook the amp up to factory radio
Question:	What are the dimensions of the subwoofer box
Answer:	The dimensions given in the description are for the amp. When I contacted the seller the informed me to contact the manufacturer, who has gotten back to me yet. So if anyone has the actual dimensions for the speaker enclosure that would be very helpful.
Question:	So does this come with the wire or not
Answer:	Just got it today. Mine didn't come with the wiring. Very disappointed

Product description

The Skar Audio ZVX-18v2 D2 subwoofer is unrivaled in performance and reliability, and features a max power rating of 3,200 watts. This 18-inch driver was engineered to withstand brutality and perform efficiently at the highest levels of output power, making it an extremely reliable and powerful subwoofer. This subwoofer utilizes a 3-inch high temperature voice coil and a massive triple slug magnet, which combined with its high roll foam surround and competition grade paper cone allow it to perform with sheer excellence. Dual 2 Ohm voice coil configuration. Peak Power: 3,200 Watts, RMS Power: 1,600 Watts, Spl: 88.6 dB. Fs: 26.8 Hz, Xmax: 29 mm, Qts: 0.53, Bl: 20.6 n/a, Frequency Response: 20-400 Hz.

• 18-inch Dual 2 Ohm SPL Car Subwoofer
• Peak Power: 3,200 Watts | RMS Power: 1,600 Watts
• Massive Triple Stack Magnet & High Temperature 3" 8-layer Copper Voice Coil
• Competition Grade Paper Cone and High Roll Foam Surround
• Advanced Air Flow Cooling Design | Fs: 26.8 Hz, Xmax: 29mm

User questions & answers

Question:	Should I get this 8in zvx or the sundown x? Is it really worth an extra hundred dollars 4 sundown
Answer:	Haven't heard what the sundowns sound like, but I have 1 single 8" zvx in a built to spec ported box matched with an 1800 watt/900 watt RMS amp and it sounds great.. about as loud as my 2 corwin vega 12"s I had before just more crisp
Question:	Does the zvx 8" dual 2ohm rms is 900W or the dual 4ohm
Answer:	both its a matter of what end load you want but both do the 900w just split it over the 2 vc either series (better have a big amp) or parallel
Question:	Will these zvx work good on a taramps 8k
Answer:	A 8k would be a bit much for 2 in my opinion but I’ve seen people do it before
Question:	So this is a 15 inch sub not an 18 inch
Answer:	They have both 15 and 18 in I recommend the 18 2 ohm if u have the space

• Loaded Sub Enclosure Features: Final Impedance: 2 Ohm, Peak Power Handling: 2800 Watts, CEA-2031 Compliant RMS Power Handling: 700 Watts, ¾” MDF enclosure, Bonded stapled and braced, Computer designed vents, Angled at 15 % for perfect bass alignment
• 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire, The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire, 50 Oz High Quality Magnet
• Amplifier Features: Rockville dB12 2000 Watt/500w RMS Mono Class D 2 Ohm Amplifier Car Audio Amp, CEA Compliant Power Ratings (Rated at less than 1 % distortion)
• RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.), - 2 Ohm: 1000 Watts x 1 Channel, - 4 Ohm: 600 Watts x 1 Channel
• Amp kit features: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable, 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables, 17’ – 18 Gauge Blue Remote Cable, 17’ – 16 Gauge Clear Speaker Wire, 3’ – 4 Gauge Clear SuperFlex Ground Wire

User questions & answers

Question:	Can I connect this amp to a stock radio
Answer:	It doesn't include the amp! Only a preloaded box with subs
Question:	Does the 12" with amp come with a bass knob
Answer:	Boo Hoo someone doesn’t know how to properly care for subs you probably hop in and turn them straight up you have to let your subs warm up lol you just didn’t respect them
Question:	What is the amp wattage
Answer:	Probably not plus the box is about the only thing good . Don’t buy !
Question:	does this hook to car radio? and how
Answer:	I have a 3000 watt amp and it does well.

Product features

Rockville DK512 PACKAGE Dual 12" 2800w K5 Car Subwoofer Enclosure+DB12 Amplifier

Includes:

• Amplifier
• Bass Remote
• Birth sheet with tested power
• Owner’s manual
• Mounting Screws

Product description

Skar Audio designed and released the EVL-1X10D2 premium loaded enclosure package to make it easier than ever to add low-frequency, head-turning bass to your vehicle. This package is equipped with one, 10-inch, Dual 2-ohm, Skar Audio EVL Series subwoofer, which is pre-loaded and wired up inside of a premium single 10-inch wedge-style ported enclosure. The Skar Audio EVL Series of subwoofers redefines the definition of low-end sound reproduction. The engineering behind developing a driver that is able to accurately handle the frequency range of these notes with authority is what makes this woofer so unique. From the bottom to the top, this subwoofer utilizes an array of design features and materials that distinctively put it in a class of its own. Rated conservatively at 1, 000 watts RMS and 2, 000 watts Max power, the EVL-10 features a high flux double stack ferrite motor, which, when combined with the 3-inch, high temperature, 4-layer, black aluminum caw voice coil - allow for extreme power handling for extended periods of time. This enclosure is covered in industrial-grade Black carpet and features the debut of our advanced port design, which promotes generous air movement, while reducing distortion. This package was put together by our installation experts to ensure compatibility and allow for an easy installation. We take the guess work out of pairing the components of your system up, and make it easy to get the bass you've always wanted in your ride. The dual 2-ohm subwoofer included in this package is pre-configured and wired up inside of the subwoofer enclosure at a 1-ohm final load to ensure an easy and hassle free installation. Enclosure Dimensions: 20. 50" Wide x 14. 00" High x 18. 50" Deep with an internal air space of 1. 65 Cubic Ft (gross volume). Vented enclosure tuned @ 39 Hz.

• All-In-One Complete EVL Series 18" Subwoofer Bass Package
• Includes x1 Skar Audio EVL-1X18D2 18" Loaded Competition Grade Ported Subwoofer Enclosure
• Includes x1 Skar Audio RP-1500. 1D Mono-block 1, 500 Watt Class D Amplifier
• Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Amplifier Wiring Kit with RCA Interconnects
• Peak Power: 2, 500 Watts | RMS Power: 1, 250 Watts

User questions & answers

Question:	Will this fit in the back of a 2004 jeep liberty
Answer:	Yes, plenty of room.
Question:	Does this fit a 2011 crown victoria
Answer:	I'm sure it will fit in the trunk
Question:	Will this fit in a 2017 Buick LaCrosse
Answer:	Yes it will

Product features

Product Specifications

• Includes Subwoofer Pre-Loaded Into Subwoofer Enclosure
• Skar Audio EVL-18 D2 - 18" Dual 2 Ohm Subwoofer
• Peak Power: 2,500 Watts
• RMS Power: 1,250 Watts
• Frequency Response: 18 Hz - 250 Hz
• 3" High Temperature Black CCAW Voice Coil

Skar Audio RP-1500.1D Monoblock Amplifier

• Max Power @ 1 Ohm: 1,900 Watts x 1 Channel (14.4v)
• RMS Power @ 1 Ohm: 1,500 Watts x 1 Channel (14.4v)
• Working Voltage: 8.5V - 14.4V
• 4 Gauge Power and Ground Terminals
• MOSFET Power Supply
• Remote Bass Knob & Wire Included
• 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC
• Fuse Rating: 120 Amp
• Dimensions: 14.75" (Length) x 6.25" (Width) x 2.25" (Height)

Product description

Planet Audio Anarchy subwoofer series are designed to please the audiophile in each of us. Available in 8”, 10” and 12”, these dual 4 Ω subwoofers produce clean, and powerful bass without breaking the bank.

• CONE: Made From Polypropylene, The AC15D 15 Inch Car Subwoofer Provides a Resilient And Durable Material That Can Offer Great Sound With The Advantage Of Long Lasting Subwoofers
• VOICE COIL: Our Voice Coils Are Able To Withstand High Temperatures Yet Maintain Its Strength And Fatigue Properties. Making Our Voice Coils With This Material, Gives Our Speakers The Advantage Of Longer Pay Times With Lower Weights
• SURROUND: Foam is very flexible, providing the subwoofer with higher efficiency. This also translates to better excursion. (How far the cone of a speaker linearly travels from its resting position).
• STAMPED BASKET: The stamped basket offers a strong and rigid platform allowing the listener to hear clean and clear music output
• SPECIFICATIONS: Resonant Frequency - 25 Hz, Sensitivity SPL (1W/1m) - 89 Db
• DIMENSIONS: Depth 15.3” x Width 15.3” x Height 7.6”
• WARRANTY: Planet Audio Provides a Powerful 3 Year Platinum Online Dealer Warranty So Long as The Purchase Is Made Through Amazon.com

User questions & answers

Question:	Power rating rms for 1 ohm
Answer:	Max. rms is 1050 watts. Be sure your amp is 1 Ohm capable. You'd need two of these subs both wired to 2 Ohms & wired in parallel to put a 1 Ohm load on your amp.
Question:	What is the ohm resistance running both voice coils? 4 or 2? I need 4onm replacments for my infinity S.M- 150s
Answer:	This one is dual 4 ohm
Question:	Will a 4000 watt planet audio amp be too muchh for two 15 inch subs
Answer:	The 4,000-watt amplifier should work with two AC15D subwoofers. Thank you.
Question:	what size amp would be good to push 2 of these subs
Answer:	I would look into a planet audio mono block amp pushing least 3 to 4000 watts. Might be a good idea to get a extra battery or compasitor so you dont strain you battery ir alternator.

Product features

ANARCHY AC15D

A new subwoofer must go through a short but important process of 'break-in' before it is run under harsh conditions. This will ensure the performance as it has been designed to. The process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. This will loosen the suspension to prevent the voice coil from overheating. Over-driving the woofer before it has been broken-in, will result in premature failure and poor performance.

Product description

DS18 SLC12S Car Subwoofer Audio Speaker - 12" in. Paper Glass Fiber Cone, Black Steel Basket, Single Voice Coil 4 Ohm Impedance, 500W MAX Power and Foam Surround for Vehicle Stereo Sound System

• WATT POWER - 12-Inch Car Audio Subwoofer offers a 250W RMS & peak power of 500W Max w/ 4ohm impedance. Lets you pump out some great low-frequency bass volume to enhance the party vibe making it a great addition to your Car / SUV music audio system
• FOR ENHANCED SOUND-The Select line of subwoofers are a great addition to your car stereo sound system. No sound system is complete without the perfect subwoofer for complimentary bass so don't deprive your Vehicle from the absolute best sound you can get!
• TREATED FOAM SURROUND - Made entirely of specially treated foam surround for durability. Designed with this non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a non-pressed paper cone and black steel basket
• SUPERIOR POWERFUL SOUND-The bass speaker features a 12-inch high-quality paper with glass fiber cone. The 45-oz magnetic structure and 2-inch black aluminum 4 layer voice coil w/ power and achieve a frequency response of 41 Hz to 4. 2 kHz. Sensitivity 90dB
• INSTALLATION/PLACEMENT - The car subwoofer can be mount inside a box / enclosure. The sub has an Overall Diameter 12. 44", Baffle Cutout Diameter 10. 9", and Mounting Depth 5. 47"

User questions & answers

Question:	what would be louder, 3 of these in a sealed box or 2 in a ported
Answer:	when ever you are buying entry level stuff people say that they suck or they ar crap but thats not true they take a 1000 watt amp and run 3 of these in a ported box and they blow because there is no resistance in a ported box like in a sealed box these would sound f**** great in a tripple sealed box wired to 1.3 ohms and you can over power them in a sealed
Question:	If I buy 4 of the 8inch subs how many watts do I need my amp to be
Answer:	an 800 watt RMS amp that is 1 ohm stable.
Question:	Can 4 of these be hooked up to a 1500 class d 1 ohm stable amp and how would they hold up if so
Answer:	Yes,u can hook all 4 subs.to your 1500 watt amp.Longest your amp.is stable to 1ohm.
Question:	Can I hook 2 of these up to my 1100 watt receiver? and are these the best bass speakers
Answer:	I'm running 2 of mine off a 1000 watt amplifier. Sounds amazing. Great bass for the size and price of the subs.

Product features

DS18 SLC Subwoofer in Black

The Select Series Subwoofers come in 8", 10", and 12" in black steel baskets. DS18 understands the demands of many inexperienced car audiophiles and fiscally responsible deal-finders. These subwoofers' success relies in their ability to deliver better quality and RMS power than all other entry level offerings of their competition.

Beats Out The Competition

Delivers better quality and RMS power than all other entry level offerings on the market.

Impressive Sound Quality

We understand that sometimes you need quality without sacrificing your budget.

Undiscovered Value

Even at a value price you still get an aluminum voice coil, fiber glass cone, and a ferrite magnet.

Product description

The Boss P12SVC is a single voice coil 12" subwoofer that is rated at 1600W Max and 800W RMS. The subwoofer features a polypropylene cone, butyl rubber surround, 87dB sensitivity, 35 Hz resonant frequency, 4 Ohm impedance and 5.125" mounting depth and is great for ported or sealed enclosure. The subwoofer comes with 1 year manufacturer warranty for your piece of mind! Please note, this subwoofer is not a CEA 2006 compliant, therefore is not true wattage rated! A subwoofer with a single voice coil can be powered by an appropriately matched amplifier or can be combined with multiple single voice coil subwoofers to achieve a variety of impedance to match your amp set up. Single voice coil subwoofers are generally ideal for low to medium power applications.

• Boss P12SVC 12" 1600W Car Subwoofer (Pair)
• 1600W Max (3200 Watt per Pair)
• 800W RMS (1600 Watt per Pair)
• Bytul rubber
• Polypropylene Cone

User questions & answers

Question:	Is this a pair
Answer:	Yes, they are.
Question:	What does the depth need to be in the box to mount these
Answer:	Normally every box works for these
Question:	Will a 1200 watt amp be good for these ? I have a 1993 suburban
Answer:	You should be ok but I would highly recommend getting a higher wattage amp. I have a 2500 watt amp on a 2016 Malibu and they hit really hard.
Question:	Are these subs true 1600 watts or are they overrated
Answer:	Overrated, not really 1600 watts.

Product description

The Skar Audio VXF series was designed to be the ultimate sq/SPL subwoofer. It was engineered specifically to feature a super low "Fs" To hit the low notes that SPL requires, while still showing versatility sounding great across other notes in the low end sound spectrum. The extra focus on increasing the coil ventilation across this line, is just one of the differentiation's that put this woofer in a class of it's own. The VXF series features a 3" High temperature copper voice coil. Under the stitched high roll foam surround, you will find a 4-layer spider with stitched leads. A massive 300 oz ferrite motor allows for extreme power handling for extended periods of time. This woofer boasts a max power rating of 3, 000 watts, and a conservative RMS rating of 1, 500 watts. Dual 2 ohm voice coil configuration, sensitivity (SPL): 89.8 dB, Fs: 31.4 Hz. Subwoofer Mounting Depth: 9.88".

• 15-Inch Dual 2 ohm sq/SPL Car Subwoofer
• Peak Power: 3, 000 Watts | RMS Power: 1, 500 Watts
• 3" High temperature Copper voice Coil | Sensitivity (SPL): 89.7 dB
• Extremely powerful 300 oz ferrite motor | Fs: 31.4 Hz
• Competition Grade Paper Cone with stitched high Roll Foam Surround
• Frequency response: 20 Hz - 250 Hz

User questions & answers

Question:	Will my hifonics 2000 watt amp push one of these
Answer:	If it's 2000rms.
Question:	Will a regular ported box work with this sub
Answer:	Yes.
Question:	What amp Can power two of these
Answer:	You ran run pretty much any amp to be honest. Anything over 2k will work pretty good. A true 1000 watts a peice will push these good.
Question:	What size Amplifier should I put on two of these subwoofer
Answer:	Anything that does true 6k or more

Product features

Technical Specifications

• Dual 2 Ohm Voice Coil Configuration
• Peak Power: 3000 Watts
• RMS Power: 1500 Watts
• Competition Grade Pressed Paper Cone
• Stitched High Roll Foam Surround
• 3" High Temperature Copper Voice Coil
• Frequency Response: 20 Hz - 250 Hz
• Sensitivity: 89.7 dB
• Fs: 31.4 Hz
• Xmax: 30 mm