11 best 10 car speakers

10-inch car speakers are a popular choice among car audio enthusiasts for enhancing the sound quality of their vehicle's audio system. These speakers are part of the broader category of car audio components and fall under the subcategory of subwoofers. Here are some key points about 10-inch car speakers:

  1. Size: 10-inch car speakers refer to the size of the speaker's cone or diaphragm. This size strikes a balance between producing deep bass and fitting into various car models.

  2. Subwoofers: 10-inch car speakers are often used as subwoofers in car audio systems. Subwoofers are responsible for producing low-frequency bass sounds, enhancing the overall audio experience.

  3. Sound Quality: These speakers are known for their ability to reproduce low-frequency sounds accurately, providing a rich and deep bass response. They are an excellent choice for those who want to enjoy powerful bass in their car audio.

  4. Enclosures: To optimize the performance of 10-inch car speakers, they are often installed in specially designed enclosures or boxes. These enclosures come in various types, such as sealed (for accurate and tight bass) or ported (for louder and more resonant bass).

  5. Compatibility: When considering 10-inch car speakers, it's essential to ensure that they are compatible with your car's audio system and available space. Different car models have varying levels of compatibility.

  6. Power Handling: Check the power handling capacity of the speakers, as it determines how much power they can handle without distortion. It's crucial to match the speakers' power handling with your car amplifier for optimal performance.

  7. Sensitivity: Sensitivity is a measure of how efficiently the speaker converts power into sound. Higher sensitivity speakers require less power to produce the same volume as lower sensitivity ones.

  8. Installation: Depending on your car's audio setup, installing 10-inch car speakers might require some expertise. Many people choose to have them professionally installed to ensure proper placement and wiring.

  9. Brands and Models: Various reputable car audio brands offer 10-inch car speakers, each with its unique features and characteristics. Research and read reviews to find the right speaker for your needs and budget.

  10. Price Range: The price of 10-inch car speakers can vary widely depending on brand, quality, and features. You can find options to fit different budgets, from affordable to high-end.

Upgrading your car's audio system with 10-inch car speakers can significantly improve your listening experience, especially if you enjoy deep, powerful bass. Ensure that you select speakers that are compatible with your car's audio setup and consider the type of enclosure that will work best for your preferences.

If you have specific questions about particular brands or models of 10-inch car speakers, please feel free to ask for more detailed information.

Below you can find our editor's choice of the best 10 car speakers on the market
  

Pyle Car Three Way Speaker System - Pro 4x10 Inch 300 Watt 4 Ohm Mid Tweeter Component Audio Sound Speakers for Car Stereo w/ 45 Oz Magnet, 2.45” Mount Depth Fits Standard OEM - Pyle PLG41.3 (Pair)

Pyle

Based on 2 reviews Check latest price

Product description

Pyle Model : PLG41.3

4 x 10 inch Component Car Speakers

4'' x 10'' 300 Watt Three-Way Speakers

  • Standard 4''x10'' Size Fits OEM Locations
  • Yellow Color Poly Injected Cone
  • Non-Fatiguing Butyl Rubber Surround
  • 2'' Polymer Cone Midrange
  • 0.5'' Neodymium Dome Tweeter
  • High Temperature Aluminum Voice Coil
  • Strong Capacitor for Excellent Performance
  • Yellow Coated Steel Basket
  • 45 oz. Magnet Structure
  • Rubber Magnet Cover
  • Power Handling: 150 Watts RMS /300 Watts Peak
  • Frequency Response: 60-22KHz
  • Impedance: 4 Ohms
  • Includes Custom Grills, Wires and Installation Hardware
  • Mounting Depth: 2.45"


  • Get in gear with the Pyle Gear series! These speakers are designed to provide the best quality sound for the budget-minded enthusiast. These 4' x 10', three-way speakers have 300 watts of pure power, supported by a 0.5' neodymium dome tweeter for sweet highs, a 2' polymer cone for mids, and a high temperature voice coil to round out the low end. The non-fatiguing butyl rubber surround and yellow-color poly-injected cone provide a sturdy foundation for keeping your sound crystal clear and distortion-free. The 45 oz. magnet structure allows these speakers to achieve a frequency response of 60 Hz to 22 kHz. To boost performance, these speakers have been equipped with a strong capacitor, meaning your speakers will never struggle for power. These speakers look cool, too, thanks to the yellow coated steel basket. Includes custom grills, wires, and installation hardware. You'll hear everything you were meant to hear with Pyle Gear.

    • THREE-WAY: The Pyle GEAR three-way speaker is the latest series which has been designed and engineered for consistency and high performance. The 4x10 inch features an eye-catching yellow poly injected cone for plenty of stiffness without added weight
    • LOW IMPEDANCE: The 4 ohm component audio speaker compensates the undersized wire found in many of today’s cars. It also makes the most of every 300 watts peak power w/ 150 watt RMS, your car stereo can deliver with rubber magnet boot cover
    • 45 OZ MAGNET: The 3-way car speaker system has 45 oz. magnet structure that completes the package. Helps to provide smooth, loud and detailed sound. Additional features include 60-22KHz frequency and 2.45” mount depth w/ yellow coated steel basket
    • POWERFUL FEATURES: The non-fatiguing butyl rubber surround keeps your speakers secure and extends its life. Supported by a 0.5" neodymium dome tweeter for sweet highs, 2' polymer cone for mid and a high temperature voice coil to round out the low end
    • WORRY-FREE SHOPPING: With the Pyle PLG41.3 Pair of Car Three-Way Speakers, we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee, no questions asked
    • Standard 4''x10'' Size Fits OEM Locations - High Temperature Aluminum Voice Coil - Power Handling: 150 Watts RMS /300 Watts Peak
    • Yellow Color Poly Injected Cone - Strong Capacitor for Excellent Performance - Frequency Response: 60-22KHz

    User questions & answers

    Question: Will they fit a 2013 chevy spark? can i use them to replace 8 ohm 40 watt speakers that busted in the spark
    Answer: I don't know but most likely.
    Question: will these speakers fir a Lexus 2001 RX
    Answer: 36
    Question: My radio low watts ,it's work with that's speakers
    Answer: You will probably need another set of hands to hold everything in place.
    Question: is this sale a pair of speakers or a single speaker
    Answer: I don't remember unfortunately. I think it is the USA made ones, because I was looking for the same thing when I wanted to modify a Kodiak Canvas Tarp connection to an accessory item they make to keep your shoes and gear dry. I can say for sure that this kit did the job though. It worked well, and I boxed it up to keep for any other projects that come up in life. I don't think I would have done that if it was made in China.

    Gravity GRWF10 10-Inch 550 Watts Car Audio Under Seat Subwoofer Powerful Loud Speaker Pro Audio Active Aluminum Super Slim with High Power Long-Throw 10'' Truck Bass Sub

    Based on 6 reviews Check latest price

    Product description

    Shopping around for the best car speakers can be a confusing and frustrating experience. Do I get a 2-way or 3-way speakers ? What about 2 way speakers, do they sound good enough? Which brand should I go with? It’s enough to make your head spin.

    • High density and high quality construction
    • Phase shift to compensate for time alignment problem in the system
    • Auto power on/ off for high level connection
    • Low pass filter controls the frequency range
    • Bass boost increases the sound level / Power status LED bi-color LED

    CERWIN-Vega Mobile H7410 HED(R) Series 2-Way Coaxial Speakers (4" x 10", 320 Watts max)

    Cerwin-vega(r) Mobile

    Based on 255 reviews Check latest price

    Product description

    CERWIN-Vega Mobile H7410 HED(R) Series 2-Way Coaxial Speakers (4" x 10" 320 Watts max)

    • 4" X 10"
    • 320W max
    • Stamped-steel vented-airflow Basket frames
    • Graphite-injected reinforced spun Cone
    • Linear-woven Treated red spiders

    User questions & answers

    Question: Is this the price for both speakers or just for one
    Answer: Just have to make sure the paint is made for plastic. I have them on the outside of my toy hauler. You can't barely see the black rings with the speaker covers on.
    Question: Will these fit in the factory speaker bracket for a 1980's chevy truck? How do they sound compared to say a 6x9 speaker
    Answer: Depends on the speaker you are using. You may need something with a more shallow base.
    Question: Can these be flush mounted, nothing sticking out the front
    Answer: Reading description that vehicle isn't listed so I'd say no
    Question: Is this sold as a pair/set or individually
    Answer: It should.... It fit my 2008 and I believe those years had the same basic body style.

    Kenwood KFC-415C 160-Watt 4-Inch x 10-Inch Two-Way Speaker System

    Kenwood

    Based on 256 reviews Check latest price

    Product description

    The 4 X 10" Kenwood speakers have a 2-3/8" polyamide balanced dome tweeter. With a frequency response of 40-25,000 Hz it has a sensitivity of 91 db. With injection-molded poly woofer with foam surround. It has a Top Mount Depth of 2-7/16 Inches.

    • 2-way Kenwood car speakers
    • 4x10" poly woofer pair speakers
    • 160 watts peak power
    • Freq Resp: 40Khz-25Khz
    • Rated Input Power: 40W
    • Includes A Woofer Injection-Molded P.P. and Balanced Dome Polyamide

    User questions & answers

    Question: Will these fit my 95 chevy blazer
    Answer: Not for sure on the blazer, I used them on a 95 gmc Sonoma extended cab truck
    Question: Will these fit a 1977 Chevy K10 dash
    Answer: No. I usted these in the back if the K10. The cargo area.
    Question: Are they 16o wts per pair or each
    Answer: Each
    Question: Do they come in pair or sepretly
    Answer: They come as a pair.

    BOSS Audio Systems CH4330 Car Speakers - 400 Watts of Power Per Pair and 200 Watts Each, 4 x 10 Inch, Full Range, 3 Way, Sold in Pairs, Easy Mounting

    BOSS Audio Systems

    Based on 2 reviews Check latest price

    Product description

    4-Inch x 10-Inch 3-Way Speaker

    • CONE: Made From Polyurethane, The CH4330 4 x 10 Inch Car Speakers Provide a Resilient And Durable Material That Can Offer Great Sound With The Advantage Of Long Lasting Speakers
    • VOICE COIL: Our Voice Coils Are Able To Withstand High Temperatures Yet Maintain Its Strength And Fatigue Properties Giving Them The Advantage Of Longer Play Times With Lower Weights
    • SURROUND: We Use Rubber In A Lot Of Our Speakers. It Has The Ability To Endure Much Punishment Without Any Sign Of Damage. It Compliments The Whole Structure Of The Speaker By Allowing Constant Abuse Where It Is Most Needed, Without The Wear And Tear
    • TWEETER: A Piezoelectric Tweeter Is More Resistant To Overloads And Can Be Used Without A Crossover Due To Its’ Electrical Property.
    • WARRANTY: BOSS Audio Systems Provides a Powerful 3 Year Platinum Online Dealer Warranty So Long As The Purchase Is Made Through Amazon Dot Com

    User questions & answers

    Question: Does this come as 2 in a package
    Answer: I would guess yes. The reason it says 08 to 13 is because of the adapter ring you need for 6.5 speakers in 13and earlier models
    Question: How many speakers come in the box
    Answer: Yes they can. Ive got 3 stacked and Im making speaker pods for my motorcycle fairing.
    Question: Everything about the ad indicates 1 speaker. If it is a set of two at this price, I am a buyer. Can you confirm
    Answer: No...one is a standoff ring...the other is anan adapter to ALLOW a 6.5" speaker & grill to be mounted in place of the old ones.
    Question: will these fit a 1995 silverado
    Answer: These are adapters for 5 1/4" car speakers to provide extra DEPTH clearance in a skinny door or roof mount. They are not meant to be used in home tower speakers and would NOT perform well if you did use them. I would suggest getting the same midrange driver that you started with but if you must...suggest you mount your new midrange on a piece of plywood or mdf that you cut a hole in and then mount that on your tower speakers with glue or silcone and screws.

    Product features

    Chaos Exxtreme CH4330

    Just one look and you’ll know why they’re called Chaos Exxtreme. The red metallic poly injection cone delivers clear sound while the rubber surround provides smooth response and durability.

    Skar Audio DDX-10 D4 10" 1500 Watt Max Power Dual 4 Ohm Car Subwoofer

    Skar Audio

    Based on 456 reviews Check latest price

    Product description

    The Skar Audio DDX-10 D4 is a competition grade, 10-inch, dual 4-ohm, car subwoofer. The DDX line-up was engineered by Skar Audio to be an SPL grade woofer that could also be utilized in daily system applications, allowing non-competitors to use the same subwoofers as those competing in the lanes. Every component used in the design of these woofers is of the highest quality for reliability and increased performance. Conservatively rated at a 1,500 watts peak power and 1,000 watts RMS power, this subwoofer was engineered to be extremely loud. Featuring a massive double stack motor (202 oz), 2.5" pure copper high temperature voice coil, and a competition grade pressed paper cone stitched to the high roll foam surround, the woofer comes equipped ready to handle serious amounts power. Dual 4-ohm voice coil configuration. Specifications - Peak power: 1,500 Watts, RMS power: 1,000 Watts. Sensitivity (SPL): 83.6 dB, Frequency Response: 40 - 500 Hz, Fs: 48 Hz, Qts: 0.53, Qms: 4.6, Qes: 0.59, Bl: 27.1 n/a, Vas: 8.7 L. Subwoofer Mounting Depth: 6.10", Subwoofer Cut-Out Diameter: 9.25".

    • 10-inch Dual 4 Ohm Competition Grade Car Subwoofer
    • Peak Power: 1,500 Watts | RMS Power: 1,000 Watts
    • Massive Double Stack Magnet & High Temperature 2.5" Copper Voice Coil
    • Competition Grade Paper Cone Stitched to High Roll Foam Surround
    • Advanced Air Flow Cooling Design | Fs: 36.2 Hz
    • Frequency Response Range: 28 Hz - 300 Hz | Sensitivity (SPL): 83.6 dB

    User questions & answers

    Question: What is the best amp i can use for a pair of these sub
    Answer: No it is not
    Question: What kind of amplifier would I need for to the speakers
    Answer: I had no issues pushing the stock sub ..
    Question: Can 2 ddx 12s dual 2 ohm handle my 4000w amp? and what ohm should i wire them
    Answer: Subwoofer. I have it pushing 2 JL Audio 12"s.
    Question: I have a 1600watt mono pioneer amp and im looking to get 2 of these. Will they handle 1ohm
    Answer: Yes

    Product features

    Product Specification

    • Dual 4 Ohm Voice Coil Configuration
    • Peak Power: 1,500 Watts
    • RMS Power: 1,000 Watts
    • Competition Grade Pressed Paper Cone
    • Stitched High Roll Foam Surround
    • Advanced Air Flow Cooling System
    • 2.5" High Temperature Copper Voice Coil
    • Motor Weight: 202 oz
    • Frequency Response: 28 - 300 Hz
    • Sensitivity: 83.6 dB

    KICKER 47KSC41004 KS Series Low Profile 4x10 Inch 4 Ohm 15 to 75 Watts RMS Power Factory Replacement Coaxial Car Audio Sound System Speakers (Pair)

    KICKER

    Based on 51 reviews Check latest price

    Product description

    Pump up the tunes in your vehicle with the KICKER KS Series 4x10-Inch Speakers. This pair of car audio speakers delivers clear, smooth sound, powerful volume, and installs easily in almost any vehicle. KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. The high-performance woofers utilize internally dampened polypropylene cones and tough rubber surrounds for outstanding midrange detail and pounding bass. These 2 coaxial speakers work best with 15 to 75 watts of recommended (RMS) power. Place these car audio speakers in almost any vehicle. With less than a 2.5-inch mounting depth and zero tweeter protrusion, these car speakers easily fit in most factory speaker locations with no modifications. The low profile speakers fit behind most factory grilles (alternative grilles sold separately). Completely redesigned for 2020 with new cones, voice coils and crossovers, KICKER KS Series 4x10-Inch Speakers are a serious upgrade from your factory sound.

    • 4x10 INCH SPEAKER PAIR: Play music at concert-like volume while maintaining smooth subtle sound with these 4x10-inch coaxial speakers
    • POWER RATING: Work best with 15 to 75 watts of recommended (RMS) power
    • FEATURES: 2-way speaker features 4-ohm voice coil, high-power handling, 0.5-inch tweeter, neodymium tweeter magnet, durable construction
    • SMOOTH SOUND: Internally dampened polypropylene cones and durable rubber sounds deliver precise midrange and midbass tones while high-quality silk tweeter produce natural, detailed highs
    • EASY INSTALLATION: Fits in almost any vehicle with low profile design and thin mounting depth that easily fits behind factory grilles (grilles sold separately); Mounting hole diameter (L x W): 3.88 x 9.38 inches; Top mouth depth: 2.38 inches; Bottom mount depth: 2.8.1 inches; Tweeter protrusion: 0 (none)

    User questions & answers

    Question: Do I need a amp to run them? Or can I just hook them up
    Answer: No, they’re not

    Audiopipe 4x10 2-way (pair) PP cone speaker 200 W

    Audiopipe

    Based on 44 reviews Check latest price

    Product description

    Audiopipe 1 Pair 4 x 10" 200W Max Power Coaxial Car Speakers The Audiopipe CSL-4102R 4 x 10" 200W Max Power Coaxial Car Speakers offer sound that will surely hit the spot and answer the purpose for those customers who opt for perfect audio quality. With a 4 Ohm Impedance and a 30mm tweeter, this speaker is sure fill the air with a 40Hz-20KHZ frequency reponse that helps you enjoy the every sound it puts out. Get great quality sound and a great bang for your buck! Features 4" x 10" Injection cone with rubber edge 30mm Mylar Tweeter 1" ASV Coil 6oz Magnet Weight 4 Ohm Impedance 200 W Max Power Frequency Response: 40HZ-20KHz Sensitivity: 88dB/W(1m)

    • 4" x 10" Injection cone with rubber edge
    • 30mm Mylar Tweeter
    • 1" ASV Coil
    • 6oz Magnet Weight
    • 4 Ohm Impedance

    User questions & answers

    Question: Is this for two speakers? It says (pair
    Answer: Yes it should fit a 2011 FLHX I have a 2012 for the price very happy with the purchase

    Skar Audio FSX10-4 10" 400 Watt 4 Ohm Pro Audio Midrange Loudspeaker, Each

    Skar Audio

    Based on 139 reviews Check latest price

    Product description

    The new FSX series FSX10-4 10-inch pro audio speaker features a high quality ferrite magnet and were designed to be very loud and powerful mid-range speakers. We wanted to develop a high power pro audio mid that offered our customers looking to run a large quantity of this type of speaker a practical solution at an affordable cost, but without sacrificing quality. That is exactly what this speaker brings to you. Rated at a conservative 200 watts RMS power and 400 watts max power, and featuring a 4 ohm voice coil, these will shine on proper amplified power. Single 4 ohm voice coil. Sold individually. Magnet type: ferrite, magnet weight: 20 oz., voice coil: 1.5" Copper, basket: pressed steel, RMS power: 200 watts, max power: 400 watts. Cut-out Diameter - 9.13", Mounting Depth - 3.86", Total Height - 4.13", Outside Diameter - 10.16", Magnet Diameter - 4.93"

    • Skar Audio FSX series 10" 4 ohm mid range speaker
    • 200 Watts RMS power - 400 watts max power
    • 1.5" Voice coil - ferrite magnet
    • Useable frequency range : 50hz-10khz
    • Sensitivity : 95.1 DB 1 with 1m

    User questions & answers

    Question: will this product 10inch speaker fit my 2001 jaguar xk
    Answer: No they are real Hertz speakers. Just had to modify to fit. They sounds good and have decent bass.
    Question: Can i use this sub for my surrond sound home system
    Answer: i installed on a 2005 ultra classic, it fit fine, just a minor adjustment on o.e.m. support brackets.

    10" Car Audio Speaker Subwoofer - 1000 Watt High Power Bass Surround Sound Stereo Subwoofer Speaker System - Non Press Paper Cone, 90 dB, 4 Ohm, 50 oz Magnet, 2 Inch 4 Layer Voice Coil - Pyle PLPW10D

    Pyle

    Based on 3 reviews Check latest price

    Product description

    Pyle Model : PLPW10D

    10'' Dual Voice Coil 4 Ohm Subwoofer

    10'' 1000 Watt Dual Voice Coil 4 Ohm Subwoofer

  • SPL: 90dB
  • 50 oz. Magnet
  • Black Steel Basket
  • Non-Press Paper Cone
  • Dual 4 Ohm Impedance
  • 2-Inch 4-Layer Dual Voice Coil
  • Specially Treated Foam Surround
  • 500 Watt RMS / 1,000 Watt Max Power
  • Spring Loaded Push Down Speaker Terminals
  • Dimensions: 10" (Diameter) x 4.7" (Depth)


  • Pyle Power Subwoofers pack a huge punch The PLPW10D is a 10-Inch booming 1000 watt subwoofer designed with the bass lover in mind. This subwoofer will make your music growl in your vehicle or at home, in any type of enclosure: sealed, vented, or open-air. The black steel basket and non-press paper cone look sleek - and thanks to a 50 oz. magnet, 2-Inch four-layer dual voice coil, and specially treated foam surround, it sounds great too. Connect to your amplifier using the spring loaded, push-down speaker terminals and feel the Pyle Power.

    From the Manufacturer

    • 1000 WATT POWER: This high powered subwoofer system has a maximum power output of 1000 watt / 500watt RMS for full range surround stereo sound reproduction and impressive bass response so you can play your favorite tracks as loud as you want
    • BUILT TO LAST: Features non-fatiguing rubber suspension, specially designed rubber magnet boot, non-press cone, specially treated foam surround, along with bumped and vented motor construction that keeps your equipment safe for extended excursion
    • DUAL 4 OHM IMPEDANCE: The audio projection subwoofer has 90 dB and dual 4 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound
    • DUAL VOICE COIL: This complete subwoofer features 50 oz magnet structure and 2 inch 4 layer dual voice coil to enhance its performance and can handle higher operating temperatures. it also has spring loaded push down speaker terminals
    • 10" STANDARD SIZE: Pyle easy to mount car speaker follows the standard size for most vehicle stereo system. It has a 4.7" mounting depth and 10" overall diameter. Perfect for new speaker construction or replacing worn / blown speakers

    Product features

    10" Car Audio Speaker Subwoofer

    Pyle Power-series subwoofers will push your audio to the MAX! This 10" small-enclosure unit will add extra punch to your low-end and give you that huge sound you want. Heavy-duty magnet, pushing 1,000-watt MAX power. Your booming sound is enhanced by the wide, non-fatiguing rubber suspension, specially designed rubber magnet boot, non-press cone, specially treated foam surround, along with bumped and vented motor construction that keeps your equipment safe and extends the life of the subwoofer.

    1000 WATT POWER

    This high powered sub-woofer system has a maximum power output of 1000 watt / 500 watt RMS for full range surround stereo sound reproduction and impressive bass response so you can play your favorite tracks as loud as you want

    BUILT TO LAST

    Features non-fatiguing rubber suspension, specially designed rubber magnet boot, non-press cone, specially treated foam surround, along with bumped and vented motor construction that keeps your equipment safe for an extended excursion

    DUAL VOICE COIL

    This complete sub-woofer features a 50 oz magnet structure and 2 inches 4 layer dual voice coil to enhance its performance and can handle higher operating temperatures. it also has a spring-loaded push-down speaker terminals

    10" STANDARD SIZE

    Pyle easy to mount car speaker follows the standard size for most vehicle stereo system. It has a 4.7" mounting depth and 10" overall diameter. Perfect for new speaker construction or replacing worn / blown speakers

    Infinity REF1000S 10 Inch Shallow Mount Subwoofer

    Infinity

    Based on 171 reviews Check latest price

    Product description

    The 1000S is Infinity’s latest Reference subwoofer offer incredible installation flexibility. Their low-profile design allows them to fit perfectly into even the most shallow of enclosures – great for today’s compact cars. Polypropylene woofer cones deliver exceptional bass response at frequencies as low as 27Hz. But what makes these subs really stand out is their Harmanproprietary SSI™ (Selectable Smart Impedance), which allows the subwoofer to present the amplifier with either a 2 or 4 ohm load at the flip of a switch.

    • Low-profile design
    • Harman-proprietary SSI (Selectable Smart Impedance)
    • 89dB Sensitivity
    • OEM-level reliability testing
    • Frequency response 35Hz - 175Hz

    User questions & answers

    Question: Can I use this sub with a similar sub of a different brand, like Pioneer 10 inch shallow, 1200w/300w 4ohm
    Answer: I have a 800watt 4 channel amp pushing 4 kicker 40cs654 and it's more than plenty. 200watt I'd think would be ideal.
    Question: Csn this be used at home with 100watts mcintosh power amp
    Answer: 30 watts rms and 60 watts peak
    Question: would these work ok in the door of a (2006) corvette? It would be a pseudo 'free-air' , with the window opening
    Answer: These are sold as a brand new pair
    Question: Has anyone mounted these in a shallow down firing box ? If so how did it perform
    Answer: Hi,Sorry, they do not come with the grilles. Thank you

    Latest Reviews

    View all

    Bestforyall.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to products on Amazon.com and any other website that may be affiliated with Amazon Service LLC Associates Program. Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates.