9 best jvc jl audio car amplifiers

Product description

Hydro Motorsports and marine by DS18 - waterproof electronics for all the elements - great fit for jeep UTV ATV Motorsports boat jet-ski

• DS18 Hydro NXL200.2D full range digital Marine two channel stereo amplifier
• RMS output @ 4-ohms: 2 x 100 watts. @ 2-ohms 2 x 150 watts. @ 4-ohms bridged: 1 x 300 watts. Frequency response: 20 - 20Khz.
• Signal to noise ratio: > 95Db. Selectable x-over: LPF/flat/hpf. Lpf/hpf filter: 40Hz - 3Khz. Low level input range: 0.2 - 5V.
• Smc (surface mount component) technology. RCA input/ speaker/ power direct harness design. Leds indicate working status: power/ protection.
• Compact size waterproof for all elements (stainless hardware, UV/Salt Fog protection, IPX6 waterproof level). Dimensions: 192 x 125 x 42 mm.

User questions & answers

Question:	Wanting to put in sxs to power tower speakers. Going to run switch to power on and off do i hook the remote wire to switch? Along with power wire
Answer:	Run your power to the battery. Run your remote to the switch. The remote will be your on/off switch source.
Question:	Do you blue tooth to the amp
Answer:	No you buy the Bluetooth receiver and wire it to the amp remote wire
Question:	If the amp gets wet will it quit until it dries out
Answer:	I have gotten mine wet several times I wouldn't soak it under water but getting it wet seems to still work fine.
Question:	What kind of warranty does this have
Answer:	The warranty is a one year limited manufacturer defect warranty. If you ever have issues you can contact us on our Amazon account or call/email our office to get support!

Product features

DS18 NXL200.2D Marine Amplifier

The DS18 Hydro All Elements Series is comprised of many components and accessories to make any build imaginable come to life.

IP65 Waterproof and UV Protected

IP65 Waterproof Certified and UV Protected. Install this anywhere on your boat, UTV, Jeep, or Off-Road vehicle.

(Certificate: LCS190527017BS by LCS Compliance Testing Laboratory, 5/30/19)

Plenty of Power

Ranging from 600 to 1600 watts, feel confident that your marine speakers have plenty of power

Compact Design

Not only is it waterproof, but it is not going to take up valuable space on your boat, UTV, or off-road vehicle

Product description

Lanzar's Heritage Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Amplifier features include variable high and low pass filters, nickel-plated RCA inputs, bass boost variability, and plenty more features to evolve your audio.

Features:

• 2 x 500W RMS @ 4 OHMS
• 2 x 1000W Max @ 4 OHMS
• 1 x 2000W Max @ 4 OHMS Bridged
• 2 x 650W RMS @ 2 OHMS
• Electronic Crossover Network
• Bass Boost Circuit
• Bridgeable at 4 Ohms
• 2 Ohm Stereo Stable
• Nickel RCA Inputs
• Line Outs for Left and Right Channel
• Low Pass Filter Controls
• High Pass Filter Controls
• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: < 0.01%.
• S/N Ratio: > 90dB
• Channel Separation: > 65dB
• Freq. Response: 10Hz~45KHz
• HPF Freq. Response: 80KHz
• LPF Freq. Response: 50Hz-250Hz
• Subwoofer Level Control
• Fuse: 40A x 1
• Dimensions: 12.99''(L) x 2.24''(H) x 8.81''(W)
• Sold as : Unit

• AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The car audio amplifier 2 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• POWER INPUT: The mosfet amplifier connections are for input power, chassis ground,& remote turn-on function. Use 8 gauge wiring for power & ground connections. The terminals will handle up to 4 gauge wiring with no negative effect or distortion of audio.

User questions & answers

Question:	Would this particular amp b ideal for 2 6.5s and 2 4x6s
Answer:	Would be more than enough, I use the 1000 watt version to run my 4 6x8's.
Question:	will this be good for 2 12 mtx termenior 400 rms
Answer:	This amp is almost 150 w rms. It is poor in power. I sold mine. In less money than the amount that I pay. Becouse it is poor.
Question:	Is this amp enough for 2 12 kicker cvr
Answer:	I highly doubt youll get 400w out of this amp let alone what it clams. I recommend an apcl15001d if you want real power for cheap. This isnt worth it
Question:	hi, i am looking an amplifier to conect 2 coaxials speakers, two tweeters and a subwoofer ¿how many channels should the amp have
Answer:	Seperate your amps for better sound comtrol the four channel will run your coaxial speaker and run your tweeters then run a mono block single sub amp

• The Punch P600X4 600 watt 4-channel amplifier (2.38” x 7.76” x 13.28") is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels
• Versatile multi-channel design can power just about any audio system configuration (RMS Power Output: 75 Watts x 4 @ 4-Ohm OR 150 Watts x 4 @ 2-Ohm OR 300 Watts x 2 @ 4-Ohm Bridged)
• RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter
• Featuring Class A/B topology, RCA pass-thru outputs, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N. Set-up
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Max size wire for remote turn on? Like the secure connection of bigger wire
Answer:	no
Question:	Can this amp push 4 deaf bonce sylvester 6.5a mis range speakers? speaker is rated at 120rms/260watt max each
Answer:	Yes
Question:	What is the true rms power on the 600x4? I know these amps are under rated
Answer:	To my knowledge it doesn't have any charger but 110v I've never looked into 240v to see if they make it.
Question:	Will this amp push two Rocksford fosgate 4 ohm 12" subs
Answer:	TORQUE 0-240/ 1,500/1,825 IN-LBS

Product features

System Versatility & Unmatched Performance

The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels. The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration.

The stealth top mounted control panel not only provides a sleek finished look to the amp, but it also protects the vital controls.

Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand.

Product description

Planet audio TR4000.1D Class D car amplifier - 4000 Watts, 1 ohm stable, digital, monoblock, MOSFET power supply, great for subwoofers

• Power - 4000 Watts Max x 1 @1-Ohm, 2000 Watts Max x 1 @2-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• Strapping Capable - You are able to strap two TR4000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

User questions & answers

Question:	Would the tr4000.1d amp it's enough or to much for my two memphis 10" 400rms 800peak single coil 4 ohms
Answer:	Hello, The TR4000.1D should work with your setup. Thank you.
Question:	Will this push two 2000 watt vm 15's
Answer:	It should do quite nicely I have it pushing 4 VM 12's an it still has power to go. Am running mine off 0ga wire cause I have noticed with out good power an ground it will heat up.
Question:	Is it power hungry? And can it push 2 12 kickers
Answer:	Yes your power supply needs to b very strong, i wud suggest you get a power cap! I have this amp pushing 2 15 kicker comp right now, very powerful!!
Question:	Just purchased tr5000.1d... what is the best 2 15" subwoofers out there i could possibly run on this mean machine
Answer:	Hello Robert, We do offer some great 15 inch speakers like the AC15D, but I would recommend the BBD12 as our best speaker. Thank you.

Product features

Class D and MOSFET

Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps.

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Strapping Capability and 1 Ohm Stable

Strap two amplifiers together to get double the power at an impedance of 2-Ohms.

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter and Subsonic Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control and Variable Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Variable Input Control and Switchable Input Sensitivity

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Phase Control

Phase control lets you switch the speaker phase with the amp if your speakers or subwoofer are hooked up 'out of phase'.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

LED Illuminated Logo

The Planet Audio Logo is Illuminated with blue backlighting.

Product description

Kick your Bass into high gear with the Boss Audio Armor AR3000D Class D Monoblock Amplifier. This powerful 1-Ohm stable amplifier features 3000 Watts Max Power with a MOSFET power supply to get your tunes rocking. Customize the sound with Variable Low Pass Crossover, Bass Boost and Subsonic Filter. Maximize the Bass with the Remote Subwoofer Control. For double the performance and power, strap on another AR3000D for a total power of 6,000 Watts @2-Ohms. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience. Give power to your playlists with the Boss Audio AR3000D. For further product details, please scroll down.

• Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms, 6000 Watts Max Bridged x 1 @2-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• Strapping Capable - You are able to strap two AR3000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Specs - Dimensions: 12.31” x 6.50” x 2.80”, Weight: 6.86
• Warranty - BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	Will these amp power these subs? https://www.amazon.com/dp/b014oykx2w/ref=olp_product_details?_encoding=utf8&me
Answer:	Yes and yes
Question:	Will this amp push 4 Elux 15 vm audio
Answer:	each 12" 4 ohm sub would only get 75 watts of power, not a good turnstile for your system
Question:	how can i hook up a 0 gauge wire to this
Answer:	Thank you for your question. The crossover setting cannot be turned off and only goes up to 250 hz. Happy to help!
Question:	Quiero saber si este amp me funciona bien para un parlante kicker l7 de 15 pulgadas
Answer:	Thank you for your question. 150 RMS @ 4 ohms, 300 RMS @ 2 ohms. Happy to help! - Creative Audio

Product features

Performance Power

Ramp up your vehicle's Bass with the Boss Audio Armor AR3000D Class D Monoblock Amplifier. With 3000 Watts Max Power and MOSFET power supply, this Amplifier packs an audio punch. Customize the sound with Variable Low Pass Crossover, Bass Boost, Subsonic Filter and Remote Subwoofer Control. Strap this Amplifier to another AR3000D for double the performance. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience.

Class D and MOSFET

Class-D amps run more efficiently and generate more power using a more compact design.

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Strapping Capability and 1 Ohm Stable

Strap two amplifiers together to get double the power at an impedance of 2-Ohms.

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter and Subsonic Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Low Level Inputs and Variable Input Control

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Phase Control

Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up 'out of phase'.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Product description

If you're in need of an amplifier that takes up little space but delivers a big sound, Soundstream's Stealth amplifiers can fill the bill. At about 3" deep by 7-1/2" wide, the ST4.1000D 4-channel amp will fit just about anywhere, delivering 90 watts per channel to your front and rear speakers, or up to 250 watts per channel in 2-channel mode to your subs. That's a lot of power in a tiny package.

• 90 watts RMS x 4 at 4 ohms (125 watts RMS x 4 at 2 ohms)
• 250 watts x 2 bridged at 4 ohms
• Mosfet power supply
• Preamp and speaker-level inputs
• Variable high- and low-pass filters (35-250 Hz, 12 dB/octave)

User questions & answers

Question:	Can this amp go behind the dash or does it get too hot
Answer:	Hello! This amplifier is class a/b.
Question:	Can only 2 channels be bridged for 2 speakers a 1 small subwoofer
Answer:	no these pictures show just the drill unit. I had batteries so I ordered these. The batteries are not included in this photo. If it does not say "batteries included" you would only receive the drill unit alone. You would need to buy the batteries separately. Be sure to check the size battery needed as there are different voltages for different drill units that all look alike. Hope this helps.
Question:	is there a way to get Bluetooth with this amp
Answer:	The models ending in -20 are typically tool only. -21 one battery, charger, and some kind of case. -22 two batteries........
Question:	Does this unit have the bluetooth
Answer:	You can use the new style 18v battery.
Question:	Do this work on Mazda
Answer:	It does but you have to buy the chisel.
Question:	I own a 2002 Yukon slt would it fit my truck
Answer:	I’d rent a Hilti.
Question:	will this fit in Buick Enclave
Answer:	Mine came with a soft case. I have seen them sold both ways. I would check the specs to see which is provided.
Question:	can i use this part for my 2011 mazda 3 i already disconnected the old amp
Answer:	Maybe , I have not try it

Product features

About Us

ACDelco is the premier supplier of GM Original Equipment (OE) automotive replacement parts, as well as a trusted provider of premium aftermarket parts for most other makes and models.

ACDelco provides high-quality parts for all major vehicle systems, as well as off-road, marine and industrial equipment. Our product portfolio includes maintenance parts such as car batteries, spark plugs, oil filters, air filters, wiper blades and brakes, as well as repair parts such as alternators, radiators, chassis and heating/cooling components.

• New Kenwood 4 channel Bluetooth marine atv motorcycle amplifier (kacm1824bt)
• 45 watts x 4 at 4 ohms
• Peak power: 400 watts

User questions & answers

Question:	Can I connect this to a 5 prong toggle switch? I want it to turn on even when the vehicle is off
Answer:	I don't know about a 5 prong toggle switch but you definitely could with a 5-pin Bosche Relay (one with an 87a terminal). You can easily find wiring diagrams for them online, but essentially, pin-30 to the positive input to the amp, pin 87a to your accessory positive from the vehicle, pin 85 and 87 to your constant positive from the vehicle and then pin 86 to the vehicle ground with a normal toggle switch inline ... with the switch turned off, the circuit runs to pin 30 through pin 87a ... with the switch turned on, the circuit runs to pin 30 through pin 87
Question:	How (where) do I connect the blue wire since I am using this amp without a head unit
Answer:	Connect the blue wire to a power source. Ideally, the power source should be controlled by the ignition switch. This will prevent the battery from getting drained if the amp is left on. You can also connect the blue wire to the same power source as the main power lead. In this instance a on/off switch (on the blue wire) should be inserted so the unit can be turned off.
Question:	If i use bluetooth, do the line out jacks work? i want to use bt with this as the main amp but run a bazooka amplified tube via the line out jacks
Answer:	Yes because im doing the same thing on my system im using this amp for. Its a Great amp. I have it on my jet ski and can hear my speakers even at 65mph with wind noise.
Question:	How long is the cord on the remote? Thanks
Answer:	The cord is 10.5 ft long th the remote control head
Question:	just installed this amp and it is producing a smell, is this normal
Answer:	The smell can be from the new amp warming up during use (feel the temp of the amp if you smell it again to verify). If it's smokey or smells like an electrical fire/short, I'd disconnect everything and look for arcing/burn marks. You might have a stray power line that's hitting ground intermittently. Good luck. Trouble shooting can be a pain.
Question:	can this amp push 1 1500 watt kicker 12 l
Answer:	It can if you bridge it right, but later you'll want a much bigger amp. The bass is right for me. My Pioneer rms is 1400 watts for a 12" also. Hope this helps!
Question:	Will this amp power two rockford fosgate 12" punch xlc 400watt speakers (200 rms
Answer:	Yes
Question:	Would this amp push a JL sub 12w6v3d4?..with no problems. Thank you in advance
Answer:	The JL 12W6v3D4 is a dual 4 ohm voice cool. If they are wired parallel (see owner'a manual) you with have a 2 ohm subwoofer and receive the 500watts. JL recommends a 200-600 watt amp, so this amp is well within those specs.

Product features

Kenwood KAC-M1824BT - Power your music on land or sea

Kenwood's KAC-M1824BT 4-channel amplifier will pump up your car's audio system with 45 watts RMS per channel — that's more than twice the power of most car stereos. The super-compact KAC-M1824BT will add new clarity and impact to the basic sound system of almost any kind of vehicle on land or water, and it'll fit in a lot of places when space is tight. The amp uses plastic plugs that protect its power and speaker connections, and features a conformal coated circuit board that keeps out moisture and salt, so the party won't stop just because of a little wetness.

IPX5 REMOTE CONTROL

The KAC-M1824BT remote control is designed to be mounted in places that are exposed to the elements. To operate in these conditions the remote control has a IPX-5 certification. This water resistant certification is the grade at which a device continues to function when directly subjected to 12.5 L of water per minute from all directions using a 6.3 mm inside diameter nozzle at a distance of approximately 3m for at least 3 minutes. This level of water resistance makes it perfect for ATV, Motorcycles and boats.

MULTI-APPLICATION

Many of today's powersports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. KENWOOD's compact performance amplifiers are small in size so they fit even the most limited installation areas. The amplifiers also use a conformal coated main PCB (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging the product.

BUILT-IN BLUETOOTH

With today's smartphones hosting a wide variety of listening choices such as stored music, internet radio, podcasts, etc., it is no wonder that customers want to use this as their primary listening source. Bluetooth offers the easiest and most popular connection, KAC-M1824BT is not only your standalone Bluetooth gateway but if used with an in-dash receiver, it will double the power of a typical CD receiver with it's built-in 45Watts x 4 of amplification. A water resistant controller can be used to adjust volume and change tracks.

Product description

The Razor Series Class D Full-Range Amp (4 Channels, 1,200 Watts max) from Power Acoustik packs huge amounts of power into a small chassis thanks to efficient Full-Range Class D topology and SMT technology. Complemented with every possible preamp adjustment, Razor amplifiers leave nothing to be desired. The small compact chassis allows mounting in very small places where other amps just will not fit.

• 1200-Watt max power, 100-Watt X 4 at 4-ohm, 150-Watt X 4 at 2-ohm, 300-Watt X 2 at 4-ohm bridged
• 4-Ohm bridged/2-ohm stereo class D full range
• MOSFET PWM power supply

User questions & answers

Question:	The adapter connector for my car is included, right? i have a citroen ds3 sport
Answer:	say it comes with all 3 trim colors
Question:	Is this amp bridgeable for a subwoofer and a pair of 6.5 speakers
Answer:	yes, but not sure why you would need 8 channels to do that. Seems like a motorcycle with 10 wheels....
Question:	Can this amp power 3 x 400w kicker cvr dual voice coil subwoofers
Answer:	Yes, this unit can play to all zones at the same time.
Question:	Would this amp be able to push a Titanium Power 12 inch Sub
Answer:	The six zones, or 12 channels, share a common power supply and turn-on method either manually switched (on the front), auto sensing, or from a 12-volt trigger (hard wired). You can select a common source (1 or 2) or connect an independent source per channel or zone but you are restricted to the turn-on option you select for all. Your best bet would be to use in-wall volume controls.

• 2 SPEAKERS: Powerful pair of motor vehicle stereo speakers
• SLIM DESIGN: Slim frame is easy to install in sportier vehicles
• BARE MINIMUM PROTRUSION: Minimal tweeter protrusion is less obvious and contributes to the slim design
• WOOFERS INCLUDED: Mid-range woofers make sure you feel the bass
• FOAM SURROUNDS: Surrounded with acoustic foam for superior direction

User questions & answers

Question:	Will these fit a 2001 wj jeep grand cherokee with infinity gold sound system
Answer:	Should fit any 6x9 location, regardless of vehicle. The important thing is to take the old one out and measure clearance when the window is down. Or measure the depth of your factory ones or the ones you are replacing. Many times aftermarket magnets are much bigger and the glass hits when rolling down the window.
Question:	What is the depth? I want to put them in my 2015 Dodge Ram 1500, in the rear doors. Do you know if they will fit? And do i need the adapters
Answer:	The magnet depth on these kickers are just about 3.25 inches. That is the amount of space behind your mounting surface that you will need in order to fit them in to your truck. I have mine mounted in the rear deck of a 2000 Honda Prelude, so I am not sure what the mounting location looks like in the 2015 Ram trucks.
Question:	Do this speakers come in a pair
Answer:	Yes it's the pair
Question:	Well these speakers work on a 2013 Nissan Central
Answer:	So did they fit? I have 1 2013 sentra as well and want to know if they fit

Product features

DS 3.5" 4 Ohm

Model 43DSC3504

DS 4" 4 Ohm

Model 43DSC404

DS 4x6" 4 Ohm

Model 43DSC4604

DS 5.25" 4 Ohm

Model 43DSC504

DS 6.5" 4 Ohm

Model 43DSC6504

DS 6.75" 4 Ohm

Model 43DSC6704

DS 6x8" 4 Ohm

Model 43DSC6804

DS 6x9" 3-Way 4 Ohm

Model 43DSC69304