10 best car tweeters

Product description

The TWS-01 are 1-inch silk dome component tweeters engineered by scar audio to deliver the ultimate experience in high frequency sound reproduction. The powerful neodymium magnets of these tweeters allow for added sensitivity and extreme power handling capability. These tweeters make for a great addition to any vehicle, whether being used in conjunction with radio power or amplified power to really allow them to come alive. Sold as a pair. Frequency response: 2.0 KHz - 20 kHz, max power: 240 watts (pair), RMS power: 80 watts (pair). 4 Ohm impedance.

• High-Performance Component Tweeter System - 2 Tweeters Included
• Max Power: 240 Watts (pair) | RMS Power: 80 Watts (pair)
• Powerful Neodymium Magnet | Sensitivity: 92 dB
• Premium Silk Dome Design Allows For Extreme Sound Clarity | Frequency Response: 2.0 KHz - 20 KHz
• Crossovers Included | 4 Ohm Impedance
• Surface, Angle and Flush Mountable Design | Mounting Accessories and Hardware Included

User questions & answers

Question:	How do I install them? And the crossover is wired between the tweeter and speaker
Answer:	Speaker wire connects to crossover wires to tweeter
Question:	Would this fit Dodge Ram 1500 2004 truck
Answer:	These are designed to fit anywhere with the included hardware and mounting brackets. If you are trying to replace existing ones, then I'm afraid I can't help you. I do know that they sound great and are well made.
Question:	Are these waterproof
Answer:	No these are not
Question:	Do these fit a Toyota 4Runner
Answer:	I don’t know. Do a online search and see what size of speakers is in your vehicle and if it has tweeters search to see what size will fit. That’s what I did before I made my Mind up to purchase them. Hope this helps. Good Luck !!

Product features

Technical Specifications

• 1” Silk Dome Component Tweeters
• Impedance: 4 Ohm
• RMS Power: 80 Watts (Pair)
• Max Power: 240 Watts (Pair)
• Frequency Response: 2 kHz - 20 kHz
• Sensitivity: 92 dB
• Powerful Neodymium Magnet
• In-line Crossover Network
• 3 Way Mounting Design: Surface, Angle, and Flush Mount

Product description

Engineered and designed in the USA by Scar Audio engineers, the VX200-ST 400 Watt 1. 8-inch high compression bullet tweeters are the perfect addition to those seeking extremely loud and clear high end frequency response in their audio system. The VX200-ST's are extremely versatile super tweeters, featuring a shallow mounting depth of only 1. 18", allowing them to be used in many sound stages where depth is an issue. It doesn't stop there however, the accuracy of the high frequencies reproduced by these tweeters is unparalleled, making them the top choice among audio enthusiasts. In addition, each tweeter's positive connection terminal features an inline noise capacitor that eliminates out all low end frequencies that might otherwise harm the tweeters. Frequency Response: 3 kHz - 20 kHz, sensitivity: 100 dB, Impedance: 4 ohms. Sold as a set of 2 tweeters (pair).

• 1.8-inch High Compression Aluminum Bullet Super Tweeters
• Max Power: 400 Watts (Pair)
• RMS Power: 200 Watts (Pair)
• Frequency Response: 3.0 kHz - 20 kHz | Sensitivity: 100dB
• 1" High Temperature Voice Coil | Impedance: 4 Ohms
• Included components: User Manual

User questions & answers

Question:	Would this fit a 2006 Nissan Altima
Answer:	Youll need to cut as these are large
Question:	Can i just run these off an amp channel without a crossover since they have 1 built in? Do i just hook it up like a regular speaker andit ajusts itsef
Answer:	I hooked mines straight to amp and they sound great. But i do have an eq on my highs also
Question:	I got a pair of these used off of amazon and they dont do anything. Why
Answer:	I dont understand?? The scream!!
Question:	Can i wire these straight to my head unit is deck power enough to hear them scream
Answer:	All depends on RMS power and power amps that you have

Product description

Model: PRO-TW120





Type: Super Bullet Tweeter

RMS Power: 200 Watts

MAX Power: 300 Watts

Diaphragm Material: Aluminum

Sensitivity: 103dB

Impedance: 4 Ohms

Frequency Response: 2KHz - 20KHz

Package Quantity: 2

Replacement Diaphragm: PRO-TW120VC

Available in: Black or Silver

• TOP OF THE LINE TWEETERS - Professional grade super tweeters that can handle high frequencies with ease. DS18 meticulously designed these tweeters to sound as good as they look.
• POWER YOU CAN COUNT ON - PRO-TW120B ferrite tweeter delivers out-of-this-world power, at 200 watts RMS and 300 watts Max at 4 ohms with build in capacitor filter.
• HIGH-QUALITY ALUMINUM FRAME AND DIAPHRAGM - If you like your highs crisp, bright, and loud, aluminum tweeters are exactly what you need. It's light, strong, and produces a bright sound at high frequencies.
• TAKE YOUR SYSTEM TO THE NEXT LEVEL - Get the most out of your system by upgrading to a super tweeter that gives you everything you're missing from your stock stereo. Discover what a high-end tweeter can do for you.
• 1" SUPER BULLET TWEETERS - Specifically designed Bullet dust cover to protect the voice coil and ensure that the highs cut through road noise and big bass.

User questions & answers

Question:	does anyone know if these tweets will fit in the dash of a g-body? normally a 3.5 coaxial sits in there
Answer:	the cut out hole is 3.5 inches
Question:	Is these come in a pair or its only one for that price
Answer:	The price is for the pair, you get two in the box.
Question:	Will it fit in my 2008 Nissan maxima
Answer:	Not likely, they are a custom fit super tweeter. But with enough ingenuity, you can make any tweeter fit. I have them in the stock location in my fiat 500e
Question:	Why am i already on my third set of these with 4 months
Answer:	Are you running in an amp if so you probably have gains to high. Also check wiring I blew 4 due to a wire shorting out. Make sure you are using the supplied capacitor/resistor they give. I have mine set on my pioneer running an active crossover set at 4khz

Product description

New Model XXX 500W Super High Frequency Mini Car Tweeters - 4x Pair Get these high quality brand new in original packaging 500W Super High Frequency Tweeters today! Made by Nippon America Group these speakers are simple and affordable upgrade to your vehicle. Each Package Content - 2x Mini Tweeters - 2x Mounts - 2x Mounting Screws - 2x Self-Adhesive Disks

• Simple Installation / Built-in Crossover
• Sensitivity: 97dB
• Frequency Response: 5 kHz - 20 kHz
• No Magnetic Field
• Fit Any Car Audio System

User questions & answers

Question:	How many rms can they handle
Answer:	350 I never try to push more but maybe you can
Question:	How many tweeters are in the package it says 8 tweeters up top but the description says only 2 tweeters
Answer:	There is 4 Pairs (8 total) not only 2 Tweeters. Thanks
Question:	Do they come in grey or any other colors
Answer:	Only Black sorry Thanks
Question:	I have the Ssoft dome tweeter As-3353 which is Negative and positive? black and white wires
Answer:	Blk should be negative and white positive.

Product description

Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle!

The PRIME series Component System kits are a new generation of factory replacement speaker delivering authentic Rockford Fosgate sound. The R1T-S is a dedicated tweeter system featuring a lightweight Mylar dome for high sensitivity and smooth extended frequency response. This low distortion material allows accurate reproduction of high frequencies for an open sound stage. Multiple tweeter mounting configurations allow flush, surface and angle configurations.

The Rockford Fosgate Prime Series A new generation of performance geared toward the "novice" car audio enthusiast, the Prime series full-range and component speakers feature legendary Rockford Fosgate sound quality while fitting into any budget.

---

R1T-S Features 1/2" (13mm) mylar balanced dome tweeter Multiple mounding configurations: flush-surface-angle Integrated 6dB/octave HP crossover

Rockford Fosgate performance at an unbelievable value. Click to enlarge.

---

R1T-S Specifications

Configuration:	1" Tweeter Kit
Midrange Diameter:	n/a
Midrange Depth:	n/a
Tweeter Diameter:	2.13" (5.4cm) Flush Mount 1.81" (4.59cm) Surface/Angle Mount
Tweeter Depth:	0.76" (1.93cm) Flush Mount 1.06" (2.68cm) Surface/Angle Mount
Frequency Response:	2.5kHz - 22kHz
Power Handling:	40 Watts RMS 80 Watts Max
Crossover:	Tweeter High-Pass (HP): 6dB
Sensitivity:	72.5dB @ 1 watt/1 meter
Grilles Included:	Yes
Mounting Hardware:	Yes

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Prime R1T-S 1-Inch Tweeter Kit, Grilles/Trim Rings, Mounting Hardware, Tweeter Surface/Angle/Flush Mounts, User's Manual

Rockford Fosgate Tweeter Kits

Good: Rockford Fosgate Prime R1T-S 1-Inch Tweeter Kit	Better: Rockford Fosgate Punch P1T-S Tweeter Kit	Best: Rockford Fosgate Power T1T-S Tweeter Set

• 1/2" (13mm) Mylar balanced dome tweeter multiple mounding configurations: flush-surface-angle
• One-inch tweeter kit with 80 watts maximum power handling
• 1/2-inch Mylar balanced dome tweeter
• One-inch tweeter kit with 80 watts maximum power handling
• 1/2-inch mylar balanced dome tweeter
• Flush, surface, or angle mounting options
• High sensitivity and smooth, extended frequency response
• Frequency response: 2.5kHz - 22kHz

User questions & answers

Question:	Are these compatible with the punch series door speakers? more specifically, two 6.75’s and two 4x6’s
Answer:	They are tweeters that augment any speakers.
Question:	Are they waterproof
Answer:	No. Need Marine application for waterproof.
Question:	What is the physical size of these tweeters. Need excatly two inch
Answer:	With the flush mount ring 2.13" total 1.83" cutout required, using the surface mount 1.81" area required.
Question:	So if i hook this up to a full signal it will filter out the lows and only let the highs come through correct
Answer:	yes , they have a built in crossover . I hooked them Bridged , as you would a Subwoofer from an Amp. Meaning I used the low output from my head unit to my amplifier , then hooked up the tweeters to the High out on the head unit and it worked great . REAL CRISP SOUND . I hope that answers your question , if you have any other questions feel free to ask / Pat ..
Question:	Do these fit the nissan quest 2013. The tweeters i want to replace are the ones on the dash
Answer:	Depends on how deep it is so am not sure hook and amp to them .
Question:	where can i get the replacement coil
Answer:	These are so inexpensive, it’s not likely replacement coils are sold. The whole assembly is under 20 dollars each
Question:	how many one or two
Answer:	Two
Question:	I bought a pair and get no sound from it? Can any one help me
Answer:	The person say they get sound

Product description

The Skar Audio SPX-T are 1-inch, high performance, neodymium component tweeters, engineered by Skar Audio to deliver unparalleled sound for those listeners seeking nothing but excellence from their vehicles sound. Designed to be added to a sound stage of existing component speakers, or to replace a lesser caliber pair of tweeters, these are unrivaled in sound quality and performance. It starts with the aluminum dome of the tweeter, which in conjunction with the silk edge of the tweeter and the powerful neodymium magnet, allow for added sensitivity and increased power handling. External crossovers are included and provided for each individual tweeter with this set. Frequency Response: 1.3 kHz - 20 kHz, 4 Ohm Impedance. Sold as a Pair. Peak Power: 320 Watts (Pair) / 160 Watts (Each), RMS Power: 80 Watts (Pair) / 40 Watts (Each). Includes an audiophile grade external crossover for each tweeter. Sensitivity: 92 dB

• High Performance 1-inch Aluminum Dome Component Tweeters with Silk Edge
• Peak Power: 320 Watts (Pair) | RMS Power: 80 Watts (pair)
• Sensitivity: 92 dB, Impedance: 4 Ohms
• Sold as a Pair - Includes x2 Tweeters and x2 Crossovers
• Flush Mount Design | Frequency Response: 1.3 kHz - 20 kHz
• Utilizing Neodymium Magnets for Premium Sound Clarity and Power Output

User questions & answers

Question:	Does it fit in a 1997 Chevy
Answer:	Yes with a little work
Question:	Speakers are waterproof
Answer:	Not sure, I used them for a portable boom box setup. I don't ever let that sit out with moisture. I can say they sound amazing.
Question:	Would these fit a 2013 Kia Optima
Answer:	If u make them fit. What is ur skill level? There is no factory mounting holes for them. So what exactly do u mean will they fit?
Question:	Whats the frequency cutoff spec on the inline crossover
Answer:	the crossover is set around 6k I found some caps to cross em at 2.8k and they play so much nicer now!

Product features

Technical Specifications

• 1” Aluminum Dome with Silk Edge Tweeters
• Impedance: 4 Ohm
• RMS Power: 80 Watts (Pair)
• Max Power: 320 Watts (Pair)
• Frequency Response: 1.3 kHz - 20 kHz
• Sensitivity: 92 dB
• Powerful Neodymium Magnet
• In-line Crossover Network
• Flush Mount Design

Product description

Niobium rare earth ferroelectric transducer magnet. Polypropylene diaphragm. 100 Watts R.M.S. Freq. Resp. 5Khz to 25Khz. Surface/angle mount/flush mount.

• Niobium rare earth ferroelectric transducer magnet
• Polypropylene diaphragm
• 100 watts R.M.S
• 20W, 10W Rms
• Imp: 4, Spl: 97 Db
• Freq Resp: 5 Hz¿2 Khz

User questions & answers

Question:	Do these tweeters require a crossover? I know some tweeters have built in high pass filters but can not find any information about these
Answer:	No crossover needed. BUT?? Make sure you put on a resistor, it’s a must. 16ohm/30w or 10ohm/20w Must have to knock out the super relentless highs.
Question:	Can i put these in my speaker box
Answer:	Speaker box for what size speaker ?? They can be mounted on almost anything. But idk about inside a box. Mine sound amazing though and they aren't even hooked to an amp. I put mine beside my door speaker. Behind the door Panel.
Question:	Would these fit in a 2000 jeep grand cherokee corner dash? the oem is
Answer:	Yes. They will fit.
Question:	does this come in a pair
Answer:	Yes you receive a pair of tweeters, two tweeters in total.

• PAIR OF 0.75-INCH SPEAKER: 0.75-inch tweeter car audio speakers deliver remarkable performance
• POWER RATING: Rated for recommended 50 watts of RMS power and 100 watts of peak power for optimal listening
• DURABLE PROTECTION: Titanium casing provides solid and reliable protection and Built-in poly-switch protection for higher volumes
• PERFECT FIT: Fits in almost any vehicle with either a flush surface or angled mounting kit (included)
• HIGH-QUALITY SOUND: 6 dB in-line crossovers allows for tweaking the most perfect frequencies; 92 dB sensitivity

User questions & answers

Question:	Do you need a amp for these
Answer:	No you don’t. They are perfect without an amp
Question:	Are these 50 watts rms each or together
Answer:	Per channel.
Question:	Does it fit 2012 ford f
Answer:	Yes it will
Question:	will these tweeters fit a 2019 F
Answer:	The short answer is...These tweeters can be used in any vehicle. If the vehicle has tweeters from the factory, and you're wanting to replace them with these? I don't know, probably. But these tweeters have 3 different mounting capabilities. Flush, angled, and pod style mounting. If you are open to mounting them in the pod on top of the dash, or on the A pillar, they can be put into any vehicle. Hope this helps.

Product features

KICKER CS Speakers

The CS-Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure with EVC (Extended Voice Coil) for even deeper lows. Polypropylene cones and ribbed, UV-treated surrounds work together for excellent reliability and precise acoustic control.

4 Component Options

• 6x9" 4 Ohm - model: 46CSS694
• 6x8" 4 Ohm - model: 46CSS684
• 6.75" 4 Ohm - model: 46CSS674
• 6.5" 4 Ohm - model: 46CSS654

8 Coaxial Options

• 3.5" 4 Ohm- model: 46CSC354
• 4" 4 Ohm- model: 46CSC44
• 4x6" 4 Ohm- model: 46CSC464
• 5.25" 4 Ohm- model: 46CSC54
• 6.5" 4 Ohm- model: 46CSC654
• 6.75" 4 Ohm- model: 46CSC674
• 6x8" 4 Ohm- model: 46CSC684
• 6x9" 3-Way 4 Ohm- model: 46CSC6934

3 Tweeter Mounting Options

• Flush
• Surface
• Angled

Product description

Product parameters:

Power: up to 180W

Yin resistance: 4Ω

Frequency response: 4000hz-26000hz

Sensitivity (db): 90dB

External diameter: 45mm

Opening size: 4.3mm

Installation depth: 13mm

Weight: 0.06Kg

Package Contents:

1 X car audio set

• ✿ The power of these speakers is designed in a stylish black wall that can be unobtrusive but effectively adaptable to any motor vehicle setting.
• ✿ Easy to install, with mounting hardware and cables to ensure installation without complications.
• ✿ This is a comprehensive and perfectly coordinated car speaker system with 180W of power, providing meticulous sound that can benefit any music type.
• ✿ Mini lightweight design, small unit movement size (1 inches), high sensitivity (90dB), good sound quality, providing good and clear sound.
• ✿ 100% quality assurance, if you have any other dissatisfaction, please contact me directly, we will respond promptly and give you a satisfactory answer.

User questions & answers

Question:	Whats the best db setting in stereo for these
Answer:	That will depend on your system build and hertz. Bass will blow them even w the crossover.
Question:	Is the treble smooth or harsh with these
Answer:	mine is very smooth. it also depends on your head unit.
Question:	Are these Alpine or a knock off brand
Answer:	These are the real Alpine, definitely not a knockoff.
Question:	Will these fit in a 2002 jeep liberty sport 4x4 3.7l dashboard
Answer:	Yep, will fit anything
Question:	Are these tweeters direct connect or do I need to go thru a crossover capacitor to block the low frequencies
Answer:	Direct connect. I connected them to my front door speakers.
Question:	I know this is a stupid question but is the wires hooked up because the image does not show
Answer:	Yes
Question:	What size are they? The product description is awful
Answer:	About 1 3/4 in diameter
Question:	are the Power acoustik NB-4 sold as a pair
Answer:	yes they are sold in pairs

Product description

Pioneer TS-A300TW 20mm 450 Watt Component Tweeter

• 20mm polyimide (PI) hard dome tweeter
• Included multi-fit installation adapters optimize fitment in applicable original equipment (OE) speaker locations
• Inline high-pass network for simple installation

User questions & answers

Question:	Will a 50 watt stereo drive a 400 watt speaker
Answer:	Yes, I connected mine to a stock stereo/headunit that pushes a low amount of watts and it worked. The sound is better than stock ones and if you don't have any tweeters at all then you will really notice a difference.
Question:	Will these fit my 2014 ford f
Answer:	The twitter is universal, will fit any car with 1 inch hole.
Question:	How many watts (rms) per tweetr
Answer:	300 watts at 4 ohms, 500 watts at 2 ohms.
Question:	Dose this come 1 or 2 speakers
Answer:	it comes with two

Product features

Pioneer TS-A300TW 20mm 450 Watt Component Tweeter

• 20mm polyimide (PI) hard dome tweeter
• Included multi-fit installation adapters optimize fitment in applicable original equipment (OE) speaker locations
• Inline high-pass network for simple installation

Easily Upgrade to High Performance

Pioneer’s A-series sound design purposely matches the subwoofer and full-range loudspeakers to provide seamless and smooth sound characteristics with dynamic, high impact bass that lets you hear and feel the music.

Easy Installation

Included tweeter mounting for surface mounting, flush mounting and specially designed multi-fit adapters for mounting in original equipment (OE) tweeter locations. Integrated/in-line crossover network eliminates the need for an outboard module to increase installation flexibility

OPEN & SMOOTH

Pioneer’s OPEN & SMOOTH sound concept provides a seamless and smooth transition between the midrange and tweeter drivers and delivers uniform off-axis frequency response optimized for automotive applications where one or more speakers are often aimed away from the listeners’ ears.

CarSoundFit App

Pioneer’s CarSoundFit app is actually a car sound simulator for experiencing in-car sound with your own smartphone. Hear the difference between original car speakers and different Pioneer audio upgrades: convince yourself of the level of quality Pioneer can offer for your vehicle. For a virtual listening demonstration of these and many other Pioneer car speakers, download Pioneer CarSoundFit app.