11 best 6x9 car speakers for bass

Product description

The ideal balance of a high end car audio system requires the ideal mix of speaker tone, deep bass impact and clean undistorted power. The MB Quart Formula Series of speakers provide the base for a great sounding, impeccable system. These 6 in. x 9 in. Formula Series 2-Way Coaxial Speakers have aluminum dome tweeters with polypropylene cone speakers. Peak handling power on these 6 in. x 9 in. car speakers is 150 watts; RMS is 75 watts.

• Included Components: Pair Of Speakers

User questions & answers

Question:	Do you have to take out the speaker cover, to install in the car
Answer:	Depends on the vehicle, i did for my 2016 Chrysler 200, because the back deck covers them completely.
Question:	Is this a pair
Answer:	This is pair speakers

Product description

The Kicker D-Series 6 by 9-Inch Dual Coaxial Speakers bundle with the Kicker D-Series 6.5-inch Dual Coaxial Speakers are a perfect upgrade for your car doors. This package of 4 speakers has drop-in coaxial upgrade with the flexibility to fit nearly any vehicle door for a vast improvement over factory sound. The thin profile woofers avoid obstructing car-window mechanisms. Domed tweeters have zero to minimal tweeter protrusion for clear sound without interfering with factory grilles. These coaxial speakers deliver increased volume output despite lower-powered, factory head units. These midrange woofers have stiff, polypropylene cones and acoustic foam surrounds to provide optimal performance that will keep your speakers lasting for years. The Kicker 6 x 9-inch 3-way car audio speakers feature a maximum power of 360 watts and an RMS power of 90 watts. They handle the high power from add-on amplifiers. The DS 6.5-Inch Coaxial Speakers have a stamped steel framework and EVC technology for the best sonic quality. These speakers will handle 60 watts RMS and 240 watts max. These DS speakers work best with 50 watts of recommended power. Bump the bass, hitting all the notes, with this dynamic speaker combo.

• 4 SPEAKER BUNDLE: Kicker 43DSC69304 D-Series 6x9-Inch 3-Way 4-Ohm Coaxial Speaker Pair and Kicker 43DSC6504 D-Series 6.5-Inch 4-Ohm 2-Way Coaxial Speaker Pair
• MINIMAL TWEETER PROTRUSION: Zero to minimal tweeter protrusion in any of the 4 speakers to provide you with superior control and sound
• SLENDER DESIGNS: Thin profiles encompass the included speakers for easy installation and fit inside doors while avoiding running into car-window mechanisms
• 90-WATT RMS POWER: Kicker D-Series 6x9-Inch 2-pack peak power of 360 watts and RMS power of 90 watts
• 240-WATT PEAK POWER: Kicker D-Series 6.5-Inch 2-pack peak power of 240 watts and RMS power of 60 watts

• Pair of 3-way coaxial speakers with 0.5-inch tweeters for rich sound detail
• Speakers feature 2-inch midrange drivers to pump up mid frequencies
• Voice voils feature EVC technology for improved woofer performance
• Neodymium tweeter magnets ramp up high frequencies
• Made to fit most cars

User questions & answers

Question:	Do these come with speaker covers
Answer:	Yes
Question:	Does it come with some wiring
Answer:	No
Question:	Would it be worth it to get an amp for these speakers
Answer:	Definitely. They sound so much better after I put an amp to them. I found a massive audio amp that put out a true 150 watts rms on each channel, now they sound amazing
Question:	Do i need a app to power these in a 92 Chevy Silverado
Answer:	An app? I’m sure you mean an amp... no, one does not need an amp to power these speakers. Just to cover the answer though, no you don’t need an app either.

Product features

KICKER CS Speakers

The CS-Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure with EVC (Extended Voice Coil) for even deeper lows. Polypropylene cones and ribbed, UV-treated surrounds work together for excellent reliability and precise acoustic control.

4 Component Options

• 6x9" 4 Ohm - model: 46CSS694
• 6x8" 4 Ohm - model: 46CSS684
• 6.75" 4 Ohm - model: 46CSS674
• 6.5" 4 Ohm - model: 46CSS654

8 Coaxial Options

• 3.5" 4 Ohm- model: 46CSC354
• 4" 4 Ohm- model: 46CSC44
• 4x6" 4 Ohm- model: 46CSC464
• 5.25" 4 Ohm- model: 46CSC54
• 6.5" 4 Ohm- model: 46CSC654
• 6.75" 4 Ohm- model: 46CSC674
• 6x8" 4 Ohm- model: 46CSC684
• 6x9" 3-Way 4 Ohm- model: 46CSC6934

3 Tweeter Mounting Options

• Flush
• Surface
• Angled

Product description

These Hifonics Zeus 6 x 9 Inch 3 Way Car Audio Speakers give your car audio system a kick of Grecian power. Instead of bringing lightning bolts and thunderstorms, these speakers bring you superb sound. They handle up to 800 watts, so you'll be able to blast your favorite tunes for all to hear. And they're made out of materials that even the Greek gods would approve of. From soft neo mylar, to alpha cellulose, and pure copper coils, too. The Hifonics Zeus 6 x 9 Inch 3 Way Car Audio Speakers aren't a part of Greek mythology, but they should be a part of your car audio set up!

• Maximum power: 800 watts
• RMS power handling: 120 watts
• Tweeter dome is made out of soft neo mylar, making it resistant to impact
• Rubber surround keeps it protected from moisture and gives high mid bass impact
• Cones are made from alpha cellulose, a lightweight material that helps create rigid deep bass sound

User questions & answers

Question:	So 2 pairs 4 total speakers
Answer:	Yes

Product description

JBL GTO Series high-fidelity speakers are the ideal upgrade for any auto or audio enthusiast who’s looking to transform the driving experience. Easy to install and built to last, this innovative line of speakers is engineered for the difficult environments and conditions both in and outside today’s automobiles. Because they’re available in the most common factory sizes, audiophiles who are upgrading or replacing their speakers can be assured that the GTO Series has a fit for every need

• Carbon-injected Plus One cones are larger than others in their size class, meaning they move more air and make more bass
• Soft-dome tweeters feature oversized voice coils for greater heat dissipation and higher power handling resulting in smooth, fatigue free highs
• A dual-level tweeter volume adjustment helps compensate for less-than-perfect speaker placement, and can even be set to suit your personal listening preference and musical taste
• Low-impedance, three-ohm speakers compensate for the undersized wires found in many of today’s cars, and make the most of every watt your car stereo can deliver
• Dedicated 12dB/octave, high-quality crossover components direct the highs and lows to the appropriate speakers for the best sound possible

User questions & answers

Question:	can you install amplifier to stock radio in a 2017 nissan maxima
Answer:	Yes
Question:	do these fit a 2010 Camry base model no jbl system, do I need adapters
Answer:	Sorry I have no idea. I fitted mine in 6x9 enclosures
Question:	What is the rms? ive lloked these up to see 200rms but its stated here 60 rms
Answer:	its 60. 200w is peak
Question:	The little button on the tweeter if i push it in do i get more tweeter sound or less
Answer:	Yes, Rudolpho, when that button is pressed on the JBL GTO 939s it will enhance the sound produced by the tweeters, giving those vocal frequencies a bit more of a boost. If you have further questions about the GTO 939 speakers, please feel free to reach out to one of our Product Specialists over on support.jbl.com. They can be reached via email or live chat, depending upon your availability.

Product features

JBL GTO509C Premium 5.25-Inch Component Speaker System

JBL engineers designed the GTO 609C component speaker to produce strong, clear sound from a head-unit or amplifier capable of delivering up to 270 watts of power. This makes the GTO 609C an ideal match to systems powered with head-unit or factory-amplifier power levels. Even better, the speaker matches many of the GTO Series amplifier combinations. As a result, it can keep up with systems that feature one or more subwoofers and satisfy high-fidelity audiophile listeners. And its great power-handling specifications also increase reliability over the lifetime of the speaker.

Fiberglass-reinforced plastic (FRP) frames

The fiberglass-reinforced plastic (FRP) frames used in the GTO 609C’s 6-1/2-inch (160-millimetre) woofer/midrange drivers resist warping even when you mount them on uneven surfaces.Their nonmagnetic carbon composite helps to control the magnet’s energy and deliver it to the voice coil instead of wasting it as heat.

What’s more, the plastic doesn’t resonate.The result of this control is accurate sound in your car.This much power makes for an ideal match to systems powered with head-unit or factory-amplifier power levels. Even better, the speaker matches many of the GTO Series amplifier combinations.

Product description

General Features:

• Alpine S-S69C 6" x 9" 85W RMS 2-Way Component Speakers System
• Power Handling:
  • Peak: 520 watts per set / 260 watts each side
  • RMS: 175 watts per set / 85 watts each side
• Carbon-reinforced polypropylene cone
• Rubber surround
• 1" Silk dome tweeter
• CEA-2031 compliant speakers
• Top-mount Depth: 2-15/16"
• 4 ohms impedance
• Frequency Response: 65 - 22000 Hz
• Sensitivity: 90dB
• 1 Year Manufacturer's Warranty
• Authorized Internet Dealer

• Make sure this fits. by entering your model number.
• Features: Component speaker system includes 2 woofers and 2 tweeters, 6"x9" carbon fiber-reinforced plastic woofer cone with specialized rubber surround, 1" silk dome tweeter with inline crossover, Handles up to 85 watts RMS (260 watts peak power), Frequency response: 65-22,000 Hz, Sensitivity: 90 dB, Woofer top-mount depth: 2-15/16", and Grilles not included

User questions & answers

Question:	Is it necessary a crossover to use them
Answer:	No tweeter has in line filter
Question:	Is it necessary to use these with an amp or can they be used off of an aftermarker head unit
Answer:	Problem with not powering aftermarket components without an amp is distortion from being underpowered via the approximate 24wrms headunits put out and that in itself will blow speakers. When powered via an external amp speakers can be turned up but with appropriate power giving loud and clear sound. Head unit alone will need to be turned up towards max to achieve loudness but with that again comes distortion and poor sound quality at higher volumes

Product description

New Reference speakers are designed to deliver Infinity’s signature sound in more vehicles. They feature edge-driven textile tweeters for smooth, clear highs and the larger models offer an adjustable tweeter output level control for high-frequency optimization based on installation location or the listener’s preference. Oversized Plus One™ woofers offer more surface area for higher bass output and enhanced midrange performance. Plus our newly engineered baskets are optimized to fit most factory speaker locations. Available in a range of standard sizes – 3", 4", 5-1/4", 6-1/2", 6" x 8" and 4" x 6" coaxial, 6" x 9" 3-way, and 5-1/4", 6-1/2", and 6" x 9" component – they’re the perfect upgrade from factory speakers.

• Infinity Premium Sound Quality
• Edge-driven, textile tweeters
• Adjustable tweeter output level
• Plus One woofer cone architecture
• Optimized Frame Size

User questions & answers

Question:	Are these sold as a pair or is it just
Answer:	It is a pair (2) speakers
Question:	Do these actually sound any different than the 9623IX with the two tweeters? Are the woofers the same
Answer:	When I yest listened th these, I was at cartoys. I did not hear a difference. I have hi frequency hearing loss, and these are great for me. I didn't see the need for the other tweeter.
Question:	Will these fit a 2001 Dodge Dakota
Answer:	It should, but you need to check sized with your existing speakers, you can also go to car toys, they'll tell you what will fit and then you can shop online
Question:	This speaker fit my 2010 Mini Cooper
Answer:	A lot of door speakers are 6x9, but you will need to check your car manual, or look online, or visit a shop like Car Toys to know for sure if you're not used to doing speakers on your own.

Product description

* Balanced Metal Dome .75-inch CV Tweeter * Piezo .75-inch Add-On Tweeter Kit * Power Handling: 350W MAX . * Woofer / Tweeter (in. mm) 6 X 9"(152mm X 203.2mm) /2.25"(57 1mm)/0.5 (12.7mm). * Mounting Diameter: 5.94" (151mm) x 4.75" (120.5mm). * Mounting Depth: 3.4" (87.5mm). * Frequency Response: 50Hz-18Khz +/-3dB. * Sensitivity: 94dB. * Vent Dimensions: Curvilinear Poly Cone.

• Country Of Origin: China
• Package Weight: 2.858 Kilograms
• Package Height: 42.926 Centimeters
• Package Length: 12.192 Centimeters

User questions & answers

Question:	Where is my package
Answer:	In chi-na
Question:	Do these fit the front doors of a 2015 Silverado
Answer:	Yes they do fit Chevy Silverado 15 doors
Question:	how many ohms doest it have
Answer:	The XED693 speakers are 4 ohms. It is not mentioned in the specs or on the website, but is clearly marked so on the box.They measured 3.5 ohms across the terminals using a good quality DMM.
Question:	Hi. What's the rms power per speaker
Answer:	Official website says 50 rms per speaker

Product description

Kicker 41DSC6934 6x9 360W Car Speakers+ 41DSC54 5. 5.25" 200W Speakers

User questions & answers

Question:	How’s the base
Answer:	excellent product
Question:	The depth of my door is 2.5 , will the smaller ones work with what I have
Answer:	Should might just have to make your own holes. I had to ok my one car.
Question:	Is this marine grade? Can they be used on a motorcycle
Answer:	They are not marine grade. I wasn't that impressed by the sound quality. Better than the blown stock ones but expected more from kicker.
Question:	Will these work for a Dodge Ram 2008 truck
Answer:	The 6x9 work in front, but the rear of mine was 6.5"not 5 1/4" holes in the rear doors.

Product description

6" x 9" Grand Touring Series 3-way Car Speakers Peak: 600 watts per pair / 300 watts each RMS: 200 watts per pair / 100 watts each Plus One cone material Mylar/titanium composite dome tweeters Frequency response: 45-21,000 Hz 2 ohms impedance Sensitivity: 94 dB

This pair of speakers includes some of JBL's top tech. Its Plus One woofer cone has more surface area than that found on competing models of the same size. Its My-Ti (Mylar/titanium composite) tweeters offer increased power handling, reduced distortion and increased efficiency. The speaker can be safely driven by any head unit. It also uses a My-Ti supertweeter to deliver every last nuance.

Why JBL Sound?

For more than 60 years, JBL products have been bringing home the impact and excitement of the world's best recording studios, movie theaters and concert venues. Now, JBL engineers are creating these world-class listening experiences in the car. Thanks to advanced technology developed in the professional arena, JBL mobile products simply sound better than the competition. High output, superb bass response, long life and smooth response are all things you can expect from any speaker that wears the JBL badge. So join enthusiasts who know audio, and don't settle for anything but JBL in your vehicle. Bring the sound of the show on the road.

Listen Loud

The last thing you want to worry about is the quality of your speakers. We understand. All new JBL mobile products have to go through nearly 500 hours of environmental testing. We put them under temperatures fluctuating between -35° C and +90° C with up to 90 percent air humidity for more than 200 hours. We expose speakers to UV light for more than 150 hours to simulate a mounting location on a car's rear deck. We even shake things up, as all of our new mobile audio products have to pass extensive vibration testing before we release them for production. We've made unparalleled efforts to ensure the best possible quality so that you can listen long and loud when you crank up a JBL speaker.

Edge-Driven, Mylar-Titanium Super Tweeter

The JBL GTO938 uses a 1/2-inch (12-millimeter) Mylar-titanium (My-Ti) super tweeter with a large voice coil--much like a voice coil found in high-end home audio speakers. The benefit of the Mylar and titanium blend in making a tweeter is that it is lightweight and has remarkable strength. At the same time, its large voice coil increases power handling and reduces distortion at high output levels. This tweeter design also helps create more seamless integration with the woofer. The GTO638's tweeter is even adjustable, so you can modify it to optimize the sound. The result? Crystal-clear, extended high frequencies for true, high-end, audiophile-quality performance.

Edge-Driven, Mylar-Titanium Tweeter

For extra smooth and detailed sound, the JBL GTO938 speakers use a one-inch (25-millimeter), Mylar-titanium (My-Ti). The addition of this dedicated driver allows the GTO938s to deliver rich sound through the midrange frequencies where most of the vocals in music can be found. This extra detail in the midrange, paired with the super tweeter and woofer, means that the GTO938s deliver true, audiophile-quality performance worthy of even the best home speaker.

Built-in Crossover Networks

Typical entry level mobile loudspeakers use low performance bass blockers to keep bass from going to the tweeter. Well, the JBL GTO938 is not your typical entry-level loudspeaker. By using a built-in crossover network with advanced high and low pass filters, the GTO938 creates a smooth transition between the woofer and tweeter. The result? Midrange vocals that sound so natural and lifelike you think you the artist were right in the car with you.

Bass that Booms

Plus One Cone

The JBL GTO938 uses a 6 X 9 woofer with the patent-pending JBL Plus One cone technology. Plus One technology gives the GTO938 more cone surface than competing models of the same size--up to 30 percent more in many cases. With a larger cone area, the GTO938 speakers provide higher efficiency and better bass response. Add a low-Q woofer design for higher bass output from the typical mounting location and 300-watt peak power handling, and the GTO938 will really get your car booming.

Powerful Performance

True 4-Ohm Topology

Low-impedance speaker voice coils extract more power from your amp for more powerful performance than high-impedance coils do. JBL GTO938 speakers use a lower-impedance voice coil than a typical 4-ohm speaker to extract the most power possible from all amplifiers engineered to drive loads of 4 ohms or less. And the GTO938 is compatible with both aftermarket head units and factory-installed systems. Since many factory-installed systems incorporate 2-ohm speakers and include amplifiers designed to drive 2-ohm loads, replacing those reduced-impedance speakers with a typical 4-ohm model will reduce the power output from the amplifier. For the most powerful performance, the GTO938 makes the best use of any amplifier by providing an optimum 2-ohm load.

An Easy Install

No special tools needed

Doing it yourself? JBL makes installing the GTO938 speakers a breeze. Designed as replacements for factory-installed OEM speakers, they easily install into nearly any factory-built 6 X 9 location without any special tools or additional modifications. If you are upgrading an older set of aftermarket speakers, the GTO938's easy installation makes replacement simple as well. You'll be listening to your new JBL speakers in no time at all.

Highlights

• Great JBL Sound Quality
• 3-way speakers delivers audiophile sound quality
• Plus One woofer cones for the high output and deep bass
• True 4-Ohm design pulls the most power out of your system
• Easy to install

What's in the Box

One pair of JBL GTO938 3-way loudspeakers

• 6 x 9-inch three-way loudspeaker pair.
• Plus One woofer cone with rubber surround
• Adjustable mylar-titanium tweeter and supertweeter with level control
• 300 Watts peak power handling; 2 ohm impedance
• Three-inch mounting depth

User questions & answers

Question:	What's that little button in the middle of the speaker and does it mean anything
Answer:	It is to adjust the sound of the tweeter but i cant tell any diffrence .
Question:	what is the RMS wattage output
Answer:	150w rms 300w max. Not sure why its not in the description. Best sounding 6x9's I've ever heard, you wont be disappointed!
Question:	Is this a pair of speakers or a single speaker
Answer:	Its a pair of speakers. 2 pieces.
Question:	Does anyone who owns these know what the frequency response is? It seems they forgot to put it in the product description. Thanks
Answer:	Jayce gave you the frequency swipe. The fs is on the speakers is 58.4. I have them with 45WRMS on the back deck of my car, and they do fill in the bass wonderfully. Not sure how they'll perform without an amp.The treble attenuator is very handy as well, it handles highs terribly well!These are at level with some kenwood excelon I had some years back... if not better (due to treble response)If you buy them, you will not be disappointed!

Product description

* Vega Signature Red Surround * 1-inch Aluminum Dome Tweeter * Power Handling: 100W / 500W. * Woofer / Tweeter (in. mm) 6 X 8"(152mm X 203.2mm) / 1.0 (25.4mm). * Mounting Diameter: 5.81" (147.5mm) X. * Mounting Depth: 3.43" (87mm). * Frequency Response: 45Hz-20Khz +/-3dB. * Sensitivity: 94dB. * Vent Dimensions: Curvilinear Mica Filled Poly Cone.

• VEGAWhen people think of Cerwin-Vega Mobile they think of robust quality.
• Low-Resonant Deep Drawn Composite Basket
• Curvilinear Cone Design for Superior Mid-Bass and Off-Axis Performance

User questions & answers

Question:	What size amp should i get to push these
Answer:	You always want to go up in size of the amp 100 rms get at least 200 amp. Speakers will love it and amp won’t strain.
Question:	Whats a good amp to push these
Answer:	Do not even add a amp.. Will blow
Question:	Whats a good amp to push these
Answer:	If you need 2 channel we recommend cerwin vega cvp800.2 or if you need 4 channel we recommend cerwin vega cvp1200.4 or cvp1600.4
Question:	Is this one speaker or
Answer:	Two (2)