10 best mtx amplifier
MTX is a well-known brand in the car audio industry, particularly for its amplifiers. MTX amplifiers are designed to enhance the audio experience in vehicles, delivering powerful and clear sound. Here are some general features and aspects you might find in MTX amplifiers:
Power Output: MTX amplifiers come in various power classes, ranging from entry-level options for casual listeners to high-powered amps for car audio enthusiasts. The power output is typically measured in watts and indicates how much sound the amplifier can deliver.
Channels: MTX offers amplifiers with different channel configurations. Common options include mono (1 channel), 2-channel, 4-channel, and even multi-channel amps. The choice depends on your specific audio setup and the number of speakers or subwoofers you plan to connect.
Class: Amplifiers are often classified into different classes based on their circuit design. Classes like Class A, Class AB, Class D, etc., have different efficiency levels. MTX may offer a variety of classes to suit different preferences and requirements.
Crossover and Equalization: MTX amplifiers may include built-in crossovers and equalizers.These features help fine-tune the audio output, allowing you to customize the frequency response and optimize sound quality for your specific car audio system.
Compact Designs: Some MTX amplifiers are designed to be compact, making them suitable for installations in limited spaces within a vehicle. This is particularly useful for those who have smaller cars or want a more discreet installation.
Bass Boost: Many MTX amplifiers include a bass boost feature. This allows you to enhance the low-frequency response, providing a more robust and impactful bass experience, which is often important for car audio enthusiasts.
Build Quality: MTX is known for producing durable and reliable products. Their amplifiers often feature quality components and sturdy construction to withstand the challenges of the car environment.
When choosing an MTX amplifier, consider your specific audio needs, the size of your vehicle, and the type of music you enjoy. Additionally, it's important to match the amplifier's power output with the requirements of your speakers or subwoofers for optimal performance.
Below you can find our editor's choice of the best mtx amplifier on the market
MTX Audio THUNDER500.1 Thunder Series Car Amplifier
MTX
Product description
Get the most out of your entire car audio system with a small footprint amplifier that packs a big punch the MTX 500 Watt Mono D Bass Amplifier. This high quality MTX amplifier is designed to work with an assortment of subwoofers and is capable of delivering up to 1000 watts of peak power and 500 watts RMS in an incredibly small package. This monster amp features a high efficiency, class D topology. This type of circuit is preferred for driving subwoofers due to its ability to minimize power loss to heat when you rock all night long. To top it all off, this unit was designed to be installed in almost any vehicle thanks to its small chassis size.
- Class D Topology
- Variable LPF
- Selectable Bass Boost
- Small Foot Print Design
- Surface Mount PCB
User questions & answers
| Question: | I have the mtx 12 in terminator subs and this amp, but I'm not sure what cords I need to get |
| Answer: | If your speakers are 4ohm speakers then hook up one speaker to each channel. And place wherever it won't matter. If your speakers are 8 ohm speakers like mine are wire two speakers to a channel. In my application I wired two speakers to channel 1, and two to channel 2 placed the speakers and sound good. |
| Question: | Will this work with my 2 mtx 7500 series 15's |
| Answer: | There should be a yellow RCA cord and a reverse wire that is located on the back of the stereo and a red (RCA STYLE) jack/cord attached to the camera. The yellow RCA cord needs to be attached to the yellow RCA jack on the camera (simple). The red (RCA STYLE) jack/cord AND reverse wire both need to be connected to a +12v wire that ONLY provides power when the vehicle is in reverse (example. reverse light). The left over black wire to the camera needs to be connected to chassis ground. *NOTE* the yellow RCA cord has a red lead on the beginning and the end that can be used to transfer power to the camera but, is NOT needed if utilizing the reverse light for power or CAN be used to eliminate the need to run both RCA and reverse (behind stereo) wire by connecting the reverse wire (behind stereo) to the red lead on the RCA cord. For someone who isn't an car audio installer this can be a bit confusing. Basically the stereo needs a wire to communicate the need to switch the screen display from default to camera feed (reverse signal wire) and the camera needs power (red and black wires) and a way to transfer information to the stereo (Yellow RCA cord). |
| Question: | We just got this hooked up and it's drawing .03 amps when it's off is anyone else having this problem |
| Answer: | Yes, it does. |
| Question: | Was just wondering if anyone knew if this sub would work well to push the mtx terminators |
| Answer: | No special card is need and you cannot use google maps |
MTX Audio TNP212D2 Terminator Power Pack Subwoofer System - Set of 2,BLACK
MTX
Product description
1200 Watt Max Dual 12" Terminator Series Loaded Subwoofer Bass System with Amplifier and Bass Knob Included
- Complete amplified bass package bundles 2 x 12 subwoofer enclosure and mono block amplifier
- TNA251 amplifier delivers 250 watts x 1 at 2 ohms; 150 watts x 1 at 4 ohms
- Variable low- and high-pass filters offer 40Hz–400Hz range for sound shaping
- TNE212D2 enclosure features dual 12-inch Terminator subwoofers with 1200 watts max power
- Enclosure boasts 5/8" MDF construction, aviation-grade black carpet, and embroidered Terminator logo
User questions & answers
| Question: | Could I pus these on a monoblock amp? Or would I have to bridge them myself |
| Answer: | Yes they can be put on mono block, that's what I have set up. Just don't bridge it, it's only 2ohm stable not 1. |
| Question: | Does anyone have the BOSS 1100 watt riot amp with these? If so how do you like? Does it hit hard |
| Answer: | I've used it temporarily on the sealed enclosure version of these. BOSS amps are cheap for a reason though. Poor sound quality and it doesn't push anywhere near the 1000 watts these can handle. If you want a cheap amp that actually sounds good I'd recommend the Power Acoustik rzr1-2500d it's not 1000 watts RMS but it'll do 700+ on good electrical & sounds Way better than the boss amp |
| Question: | anybody had these subs for awhile do they last |
| Answer: | I have had these subs in the box 4 going on 6 years with a 3000 watt competition massive amp pushing 800 watts RMS bridged making it 200% overpowered I paid $122 for them six years ago and they are still thumping to this day |
| Question: | Is this just the enclosure or is it the two 12" subwoofers and the enclosure in one deal |
| Answer: | Everything you see, you get...no speaker wires though... |
MTX Audio MUD100.2 Mud Series Amplifier
MTX
Product description
The MTX MUD100.2 is the most compact amplifier that MTX has ever made. This unit features full range class D topology that delivers exceptional sound quality and excellent thermal efficiency
- Package Dimensions: 31.496 cms (L) x 13.97 cms (W) x 5.334 cms (H)
- Package Quantity: 1
- Product Type: Car Audio Or Theater
- Country Of Origin: China
User questions & answers
| Question: | Can you hook two of these amps together to run a subwoofer |
| Answer: | If the radio has an AUX plug-in chances are it will - mine still works fine (2009 Impala) - Norm Mahoney |
| Question: | will this run 4 speakers |
| Answer: | The volume control is on your car's radio/sound system. You have to sync this gadget with an completely free FM band on your radio. then you can play music or take calls through the bluetooth connection on the gadget and your phone. This gets channeled to the FM station you've synced with the device. You have to turn on your radio to get the sound and control the volume |
| Question: | Is this a 2 channel amp |
| Answer: | There are two mics. One is on the left side of the FM frequency, the other is on the below the LED lights. |
Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier,BLACK
Rockford Fosgate
Product description
Get more out of your car audio and take it to the next level of audio perfection with the unparalleled performance of the Rockford Fosgate 500 Watt Mono D Amplifier with Remote. This Rockford Fosgate is a quality made Mono D car amplifier rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, and phase switch. The amplifier is CEA 2006 compliant and comes with a remote bass control. Great audio starts with a great amp, so be sure to choose quality with the Rockford Fosgate 500 Watt Mono D Amplifier with Remote.
- 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
- Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
- On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
- Cast Aluminum Heatsink with Stealth top mounted control panel
- Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system
User questions & answers
| Question: | Does the R500x1D come with the remote or is it sold separately |
| Answer: | It comes with the remote. I thought it didn't so I bought one for it and it already comes with it so I have two now |
| Question: | Does this amp provides High (Speaker) Level Inputs so it could be connected to a factory head unit |
| Answer: | I know this is late, but it may help others. Yes it does and you can tie into signal at rear speaker wires. The built in crossover will allow use of a sub woofer. Only drawback to this set up is that if you turn down head unit bass for doors ect. it also affects sub amp. HU built in crossover would be better for a balanced and more adjustable sound. This requires the HU to be upgraded however. A line output converter is a good option too even if you have low input ability. Makes for a neater install IMO. Bottom line is that it is dooable. Good amp too. Birthsheet is 648 watt @ 2 ohm 14.4 v on mine. In vehicle at idle in real life I average 629 using amp draw and voltage formula, I also own the P300-1 which pushes about 415 @ 2 ohm real life wattage. Birth sheet of 426. Banging for years in wife's ride on that one no issues. The new one rocks good so far in my ride. Love these amps. So much power for the size. Also as a D class amp they are efficient and take less away from the vehicle power system causing less strain. Bang some high power AB amps for a few years and your whooping on that alternator and battery shortening their lives. Less light dimming too. |
| Question: | Does this amp have an auto turn on feature so I dont have to wire up a remote turn on |
| Answer: | Another option in which I chose since it does need turn on signal is to use an added retained accessory power relay or just a simple relay. Your going to remove side panels to run RCA anyway so tap easily into a 12v power source when vehicle acc is on which can be found closest to amp position that is passing to rear of vehicle already. I used this one from Radio Shack. Model: 275-233 Catalog #: 2750233 0.5-AMP SPST REED RELAY AT 12VDC. This set up should be used to turn on multiple amps and relieve the head unit circuit. No tiny wire to run either. Although if this wire is just attached to RCA prior to install for a 1 amp install then this is the easiest way. If you use the relay then remember to fuse it to protect the head unit circuit. |
| Question: | is this amp 4 or 8 awg power and ground |
| Answer: | It has 4 awg connections for both power and ground. I am using mine with 8 awg wire and it runs perfect. I am not running it at max gain though. Only using it to run one 10" L7! |
Product features
Prime 500 Watt Class-D Mono Amplifier
The Rockford Fosgate R500X1D is a quality made Mono D car amplifier that is rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, phase switch, the amplifier is CEA-2006 compliant and comes with a remote bass control. The dimensions are 8.50 L x 6.80 W x 2.00 H inches.
MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box, Mono Block Amplifier, and 8 Gauge Amplifier Amp Complete Wiring Installation Kit
MTX
Product description
If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal. Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.
- ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
- HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
- MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
- AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
- SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches
User questions & answers
| Question: | Will this fit a 2011 dodge avanger |
| Answer: | Yes |
| Question: | Will this work in my 2006 chevy equinox |
| Answer: | Yes if you have aftermarket radio or the adapter to hook the amp up to factory radio |
| Question: | What are the dimensions of the subwoofer box |
| Answer: | The dimensions given in the description are for the amp. When I contacted the seller the informed me to contact the manufacturer, who has gotten back to me yet. So if anyone has the actual dimensions for the speaker enclosure that would be very helpful. |
| Question: | So does this come with the wire or not |
| Answer: | Just got it today. Mine didn't come with the wiring. Very disappointed |
MTX Audio JH15001 Jackhammer Series 1500W Monoblock Class-D Car Audio Amplifier
MTX
Product description
1500W Monoblock Class-D Car Audio Amplifier
- 1500W Monoblock Class-D Amplifier
- 4 Ohm: 650 watts x 1 ch. | 2 Ohm: 1100 watts x 1 ch. | 1 Ohm: 1650 watts x 1 ch.
- Frequency Response: 20Hz - 250Hz | Low Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct
- Subsonic Filter (Variable): 20Hz - 50Hz 12dB/Oct | Bass Boost (0 - 12dB): 45Hz
- Includes Remote Bass Knob
User questions & answers
| Question: | what is the peak power on this amp |
| Answer: | This product need to be connected manually for the first time, then it will automatically connect as long as the Bluetooth on the phone was turned on. |
| Question: | Would 2 mtx audio 7512 work ok |
| Answer: | Definitely Yes to both. |
| Question: | hello, everybody; any idea of dimensions |
| Answer: | Motion Man is incorrect. You can see in the photo, as expected, since this is for a MARINE installation, that you need 12V (car/boat battery) connected to it. You CANNOT plug this into 120vac outlet!!! |
| Question: | Will this amp push 2 12 MTX 9500 subwoofers |
| Answer: | The sound is good but in my opinion the volume is not loud enough for a party |
MTX Audio JH10001 Jackhammer Series 1000W Monoblock Class-D Car Audio Amplifier
MTX
Product description
1000W Monoblock Class-D Car Audio Amplifier
- 1000W Monoblock Class-D Amplifier
- 4 Ohm: 450 watts x 1 ch. | 2 Ohm: 775 watts x 1 ch. | 1 Ohm: 1100 watts x 1 ch.
- Frequency Response: 20Hz - 250Hz | Low Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct
- Subsonic Filter (Variable): 20Hz - 50Hz 12dB/Oct | Bass Boost (0 - 12dB): 45Hz
- Includes Remote Bass Knob
MTX TNP212DV 12 Inch 2000 Watt Dual Loaded Subwoofer Enclosure with Amplifier and MWA040 External Bass Control Knob Accessory
Product description
The MTX TNP212DV 12 Inch 2000 Watt Dual Loaded Subwoofer Box Enclosure delivers unforgettable bass with the perfect combination of 12 inch subs, monoblock amp, and a box to boot. This dual 12 inch vented enclosure has a single terminal cup showing a final 2 ohm impedance load to any connected amplifier. The built in Terminator subwoofers feature durable, light polypropylene dust caps that stand up to the rigors of most trunks while using less power. Each subwoofer can handle 500 watts RMS power, resulting in a power level of 1000 watts RMS or 2000 watts max for the entire enclosure. The box measures 29.5 x 13.5 x 11 x 14 inches and is constructed with 0.625 inch MDF with tough carpet covering. Also included is the MTX Bass Control Knob. Hook this control box up to your car audio amplifier using the 1-wire connecting cable and customize your booming bass with the easy-to-use knob controller. Adjust your bass conveniently from your dash without having to reach for the amplifier. This remote bass controller is compatible with MTX amplifier THUNDER and WET series monoblock channel models including THUNDER1000.1, THUNDER500.1, and WET500.1. Easily mount the bass knob box with the integrated side slots and the included hardware. The TNA500D is a 500 watt class D amplifier designed specifically to fit with this car audio setup so you'll be 1 step close to audio perfection right out of the box.
- MTX AMPLIFIER: MTX 12-Inch 2000W Dual Loaded Subwoofer Enclosure with Amplifier; Dual 12 inch vented enclosure with a single terminal cup
- POWERFUL SYSTEM: 2,000 watt of max power, 1,000 watts RMS; Vented design is tuned for harder hitting base
- DUST CAPS: Polypropylene dust caps are durable and lightweight, allowing them to use less power; Enclosure measures 29.5 x 13.5 x 11 x 14 inches; 0.625 inch solid MDF construction
- BASS CONTROL KNOB: MTX MWA040 External Bass Control Knob for THUNDER and WET Car Audio Amplifier; External bass control knob provides customizable bass for your optimal sound experience
- TOTAL CONTROL: Allows you to control your bass from the dash without having to reach for the amplifier; Simple 1-wire connection gets you up and running in a flash; Compatible with MTX amplifier THUNDER and WET series monoblock channel models: THUNDER1000.1, THUNDER500.1, and WET500.1
MTX MUD100.4 Mud Series 400 Watt RMS 4 Channel Class D Compact Weatherproof Outdoor Powersports ATV UTV Motorcycle Sound System Stereo Amplifier Kit
MTX
Product description
Add some oomph to the sound system on your ATV, UTV, or motorcycle with the MTX Mud Series 400-Watt 4-Channel Amplifier. This compact class D amplifier features a full range topology that delivers exceptional sound quality. This powersports amp has 4 channels that are capable of delivering 100 watts of RMS power per channel. More than enough power to drive a single or dual full-range speakers per channel. The entire mini amplifier is weather resistant including a conformal coated circuit board and control covers that prevent damage from moisture intrusion. The unique design includes a pigtail that contains all of the wiring necessary to connect power, ground, and signal without having to make a connection. The compact nature of the outdoor amplifier and its excellent efficiency make it ideal for a variety of applications including UTV's and motorcycles. The amplifier footprint fits on most OEM motorcycle radios and its resistance to radio frequency interference makes it the perfect choice for upgrading the stereo on your motorcycle. The MTX Mud Series 400-Watt 4-Channel Amplifier is the perfect amplifier for building or upgrading the sound system on your outdoor recreational vehicle.
- INSTALL IN THE TINIEST OF SPACES: Compact design and small footprint chassis allows for installation in space challenged vehicles
- WEATHER-PROOF DESIGN: Conformal coated circuit board is protected against corrosion or circuit deterioration due to exposure to moisture or salty conditions
- WIDE RANGE OF ABILITY: Fixed high and low pass crossovers allow use with full-range speakers or subwoofers
- HIGH AND LOW-LEVEL INPUTS: High and low-level inputs allow for connections to both speaker and RCA input signals
- CONVENIENT PIGTAIL CONNECTION: Includes a pigtail that contains all of the wiring necessary to connect power, ground, and signal without having to make a connection directly at the amplifier
User questions & answers
| Question: | Does this come with the pig tail adapter to wire up speakers |
| Answer: | I'm unsure why you would purchase this item if your vehicle has blue tooth. I purchased this because my vehicle doesn't have blue tooth. So hands free option for the phone , plus listening to Pandora is like having all the modern conveniences without buying a new car |
| Question: | Does this come with the mounting bracket |
| Answer: | Yes it is compatible with iPhone 8. I bought this when I first purchased my iphone 8. At that time iPhone 8's were not working well with some car bluetooth systems. I found this unit connected pretty easily. Unfortunately the microphone didn't work very well though. It worked great for music but not for phone calls, which is why I got it. |
| Question: | Can this amp be used for 2 tower speakers and a subwoofer |
| Answer: | Thanks for your inquiry, there are two options regarding your questions after your bluetooth connection between this car kit and your smart phone. 1. If you receive the phone call from this BK03 car kit, it will use this BK03 microphone. 2. If you use your smart phone speaker to receive the phone call, it will use your smart phone microphone. Note: if your smart phone is iPhone, you will use the phone speaker to receive the call if you press the call button from the iPhone. If you want to use the BK03 car receiver to receive the call, please press the " call button" of this BK03 receiver. Any further assistance, please contact us via e-mail: [email protected]. Thanks. |
| Question: | Has this amp ever been dyno tested for true rms power |
| Answer: | No. The clip is separate. Not sure how it attaches cuz I didn’t use it. I used the dbl face tape to attach to my dash. |
MTX Audio Remote Bass Control for MTX Thunder/Wet Series Amplifiers
MTX
Product description
Remote Bass Control for use with MTX THUNDER AND WET series amplifiers
- Package Dimensions: 13.462 cms (L) x 9.144 cms (W) x 1.777 cms (H)
- Package Quantity: 1
- Product Type: Remote Control
- Country Of Origin: China
User questions & answers
| Question: | I see some reviews say it's "backwards"... But does the min/max match up to which way your turn the knob or is that incorrect as well |
| Answer: | Yea its backwards. Counter clockwise for more bass, clockwise to lower bass. But you can just un-screw it and adjust it. |
| Question: | Can you tell me the exact measurements of the length of the cable, as I have a very large sedan |
| Answer: | Don't know exact, I drive a dodge neon and I had a good 8-10 ft extra it's plenty long |
| Question: | will this work with all amps |
| Answer: | No.. Absolutely not.. It may work on other amplifier brands as long as they accept the 3.5 jack. But the knob has a resistance value that was designed to work with the MTX brand. |
| Question: | How long is the cable |
| Answer: | Didn't really measure it, but it's long enough to run to the back of most sedans. about the same length of a set of rca patch cable in an amp kit. So maybe around 16' |
Latest Reviews
View all
Electronic Vapors
- Updated: 09.05.2023
- Read reviews
Cricket Kit For Kids Size 5
- Updated: 07.01.2023
- Read reviews
Cell Phone Holder
- Updated: 10.07.2023
- Read reviews
Garmin Portable Gps
- Updated: 08.01.2023
- Read reviews
Trademark Innovations Outdoor Umbrellas
- Updated: 26.07.2023
- Read reviews