12 best handbrake audio converter

Product description

Introduction:

The AV +S-Video to HDMI converter which will convert AV signal and S_VIDEO video signal and the FL/FR stereo audio signals to HDMI video signal or audio.To help user get the high quality of the HDMI video signal form normal CVBS and S_VIDEO signal(standard-definition480i,576i).

So that can play on TV,VHS VCR,DVD recorders, etc and support PAL_B/N/M NTSC J_M/J/Nc six video mode, and support CVBS/S-Video.

Specifisations:

1.Input ports: 1× CVBS(Yellow, White, Red); 1× S-VIDEO

2.Output ports:1× HDMI.

3.Dimensions(mm):110(D)× 84(W)× 28(H)

4.Wight(g):63g

5.HDMI output Resolution: 1080p50Hz. 720p50Hz

6.CVBS input : PAL_B/N/M NTSJ_M/J/Nc

7.S-VIDEO input: PAL_B/N/M NTSJ_M/J/Nc

8.MODE key: if you pressed the key ,the video mode will change the output video mode().

Notice:

1.When the converter is connected with some devices (such as Sony Blu-ray DVD, XBOX360, PS4 and so on) which can not supply enough power from HDMI port,the converter need extra power supply via the USB cable.

2.This product doesn't support simultaneous output of Composite Video. Please select either one of them by switch button on the unit.

3.Must use the micro cable to connect power.

4.This converter only support 720p and 1080p output,Please make the correct settings with the HDMI displayer.

Package List:

1 x Male AV/s-video to HDMI converter

1 x Micro USB Cable

1 x User Manual1*S-Video Cable

• 【Male RCA AV to HDMI Converter】 Can Convert Male AV CVBS Video Signal + Female S-video Signal + Male L/R Stereo Audio Signals to HDMI Video or Audio Signals, Be Compatible with TV, VHS VCR, DVD Recorders and More.
• 【S-Video to HDMI Converter】It Convert S-video analog video and L / R audio to HDMI signal.(Note: This converter ONLY Supports S-video to HDMI , does not support HDMI to S-video .
• 【Support PAL or NTSC】 CVBS and S-VIDEO Input: PAL_B/N/M; NTSJ_M/J/Nc. Support Six Video Modes in Total.
• 【Support 720p/1080p】 Support HDMI 1.3, HDMI Output Resolution: 1080p@50Hz, 720p@50Hz. You can choose 720p or 1080p by Switching Button.
• 【Low power consumption】 No Need Any Drivers, Portable, Plug and Play. Only Need Low Power Via USB Cable. Powered by 5V 1A USB Cable.

User questions & answers

Question:	Is the svideo a male plug so i can plug it into my dvd player
Answer:	It has a button to select 720P or 1080P.
Question:	does it support 1080i
Answer:	I’m waiting to hear from the company because I figured I was getting both and only got screw type

Product description

MyGica Capit USB Video Capture device allows users to capture video from a VHS/VHS-C tape or any other analog video source to your PC by connecting AV and S-Video sources with high resolution at 720 x 480 @ 30 FPS. You can edit the captured video and burn to DVD or publish to the web. It includes professional easy to use video editing software. It is compatible with Windows 10, Windows 8.1 and Windows 7.

Package includes:

MyGica Capit Video capture adapter

Composite Audio video cable

User Manual

Driver software CD with CD KEY

• Capit is USB 2.0 capture equipment designed for capturing video source from VHS, V8, Hi8 and turn it to MPEG format videos
• Connect your device using either AV or S-Video connector, capit will auto detect if it's NTSC or PAL video
• Recorded resolution can go up to 720x480(576), you can easily turn the video into VCD, SVCD, DVD or even upload to vedio to Youtube
• USB video capture for PC or laptop computer, convert old cassette / vhs tapes / camcorder recorded videos to be digital files
• Compatible with Windows 10, Windows 8.1 and Windows 7

User questions & answers

Question:	I have european pal format tapes as well as us (ntsc). does this work for both
Answer:	I think it should work. You can change to PAL format in setting.
Question:	Does this capture the audio as well? it looks like it should since there are rca hookups, but it says only "video" in the description
Answer:	Yes. Audio and Video. The Red and White Connectors are for Audio.
Question:	Is the software available online? I don't have a CD drive on my computer
Answer:	The online support download doesn't work, I don't have a CD drive on my computer either. But when i go to the website you suggested, it doesn't work or open.
Question:	What Formats Does the included software output
Answer:	MPEG-2 format. DVD format.

Product description

Features:

Working Function: Includes a volume control, mic, mute button and so on.

Compatible With: This cable is compatible with both for A40 gaming headsets.

High Performance: Clear sound transmission and lossless 3D stereo sound quality.

Note: in order to control your device with the cable, the switch needs to be in the B position.

Universal Design: Mobile cable, media controller cable, multi functional.



Specifications:

Material: Rubber+Copper

Color: Black

Size(Approx.):1m, 2m(Cable Length)

Compatible Model: For A40



Package Included:

1 xAudio Cable



Note:

1. Due to the light and screen difference, the item's color may be slightly different from the pictures.

2. Please allow 0.5-2 cm differences due to manual measurement.

• Working Function: Includes a volume control, mic, mute button and so on.
• Compatible With: This cable is compatible with both for A40 gaming headsets.
• High Performance: Clear sound transmission and lossless 3D stereo sound quality.
• Note: in order to control your device with the cable, the switch needs to be in the B position.
• Universal Design: Mobile cable, media controller cable, multi functional.

Product description

The SNI-35 Adjustable 2-Channel Line-Out Converter from PAC Audio is a line-out converter for factory radios with 2 to 50 watts per channel, accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system. It allows 50 watts maximum input per channel and has a linear 20Hz to 20,000Hz output based on input signal. The transformer isolated for optimal sound and performance. The unit maintains correct phasing and works with most factory-installed radios.

• Adjustable Line Output Converter
• Use the SNI-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier (RCA) level input
• Utilize Audio Transformer for Noise Isolation
• Phase Adjusted
• .5 dB Linearity from 20 - 20,000 Hz

User questions & answers

Question:	is this the converter i get for the high output option on my amp
Answer:	This one is older
Question:	Want to connect to home audio, my level out can be up to 145w. Will it blow this? If I max volume
Answer:	no
Question:	So this doesn't affect the high-power feed going to the speakers it's leeching off of? They'll still be powered up
Answer:	Personal preference, if you don't plan on adjusting the pots on the unit then install with the radio. But if you want access to it, then obviously near your amp.
Question:	Does this have Power and Ground Wires
Answer:	No

Product features

PAC SNI-35 Variable LOC Line Out Converter

The PAC Line Out Converter provides an additional set of pre-amp outputs from a head unit equipped with only 1 set. This Adjustable Line Out Converter is linear from 20Hz to 10KHz at +/-0.5 dB while maintaining signal phase. With the PAC SNI-35 2-Channel Line Out Converter, the input and output circuits are isolated to prevent ground loop noise. A PAC Line Out Converter can adjust the signal from 2W to 40W per channel with signals below 20Hz cut-off.

• 3.5mm female to 2 RCA male cable adapter used for plugging the 3.5mm plug into the headphone jack of your device and the 2 RCA inputs on your sound system
• Compatible with most RCA interface stereo audio and video components, such as your smartphones, MP3, Tablets, Home Theater, HDTV, Gaming Consoles, Hi-Fi Systems and more.
• High Pure Copper, ensuring high fidelity sound quality and providing maximum's conductivity and durability.
• Step down design, no need to take off your slim protective cases for smartphone, tablets
• Cable Length：8 Inch. What You Get: 2 x 3.5mm Female to 2 RCA Male Adapter Cable

Product description

Feature:

1. Connector can ensures reduce loss of single track transmission, convert 3.5mm port audio devices(such for IOS/MP3/smartphone and laptop) to 2RCA plug devices, such for TV/AV receivers/amplifier/projector/radio/car audio/stereo system/Hi‑Fi audio/computer sound/recording equipment and speaker.

2. Hi‑Fi, provide high performance and multifunction bass for AV audio devices, accurate transmission of high bandwidth frequency quality, can achieve detailed cleansing of pure natural sound.

3. Full molded connector provide excellent stress eliminate effect, dual conductors shielded, can prevent EMI and RFI interference.

4. Portable audio device, MP3 music player, smartphone or tablet computer with ordinary 3.5mm audio port TV, for AV receiver, amplifier, projector, radio, car audio, stereo system, hi‑fi audio, computer sound, recording device, speaker, etc.

5. 3.5mm(1/8 inch headphone hole) to 2RCA(right/left) stereo cable suitable for 3.5mm headphone hole of device or computer, insert 2RCA into left and right assist input cable length of the audio system: 20cm, 2 x 3.5mm stereo hole to 2RCA stereo plug cable.

Spec:

Condition: 100% Brand New

Item Type: Audio Adapter

Material: Metal, Plastic

Color: As Pictures Shown

Quantity: 10PCS

Connector: 3.5mm Stereo Male Plug to 2RCA Female 

Weight: Approx. 230g

Total Length: Approx. 28cm/11inch

Package List:

10 x3.5mm Stereo Female to 2RCA Male Cable

• 3.5mm(1/8 inch headphone hole) to 2RCA(right/left) stereo cable suitable for 3.5mm headphone hole of device or computer, insert 2RCA into left and right assist input cable length of the audio system: 20cm, 2 x 3.5mm stereo hole to 2RCA stereo plug cable.
• Hi‑Fi, provide high performance and multifunction bass for AV audio devices, accurate transmission of high bandwidth frequency quality, can achieve detailed cleansing of pure natural sound.
• Connector can ensures reduce loss of single track transmission, convert 3.5mm port audio devices(such for IOS/MP3/smartphone and laptop) to 2RCA plug devices, such for TV/AV receivers/amplifier/projector/radio/car audio/stereo system/Hi‑Fi audio/computer
• Portable audio device, MP3 music player, smartphone or tablet computer with ordinary 3.5mm audio port TV, for AV receiver, amplifier, projector, radio, car audio, stereo system, hi‑fi audio, computer sound, recording device, speaker, etc.
• Full molded connector provide excellent stress eliminate effect, dual conductors shielded, can prevent EMI and RFI interference.

Product description

For 40 years, Scosche has been producing high quality, affordable Car Stereo Dash Kits, Vehicle Wiring Harnesses, Adapters, Interfaces, Amplifier Wiring Kits, Cables and other 12V installation accessories. We know how you feel about your vehicle, so we will not design, engineer or deliver a product that does not meet our extremely high standards. When you purchase a Scosche installation accessory, we have you covered. We offer Lifetime Tech support which means our knowledgeable tech team is available to answer any product questions you may have for as long as you own the product. We are so confident in our product quality that we back all Scosche 12V installation accessories with a Limited Lifetime Warranty

• ADD SUBWOOFERS: Works with high power car stereos (up to 80 watts per channel) to add subwoofer bass systems to any car stereo
• EASY TO INSTALL: Provides amplifier remote turn on output without removing car stereo
• OUTPUT CONVERSION: Converts car audio speaker wire outputs to RCA Cable outputs
• ADDITIONAL CHANNEL: Allows the addition of 2-channel or mono amplifiers to factory or aftermarket stereos
• BUY WITH CONFIDENCE: Backed by Scosche’s Lifetime Tech Support and Limited Lifetime Warranty

User questions & answers

Question:	What amp fuse does the signal wire need
Answer:	12 volt to turn amp on
Question:	How much signal voltage does this give to the amp
Answer:	I seen the same reviews and I bypassed it .I didn’t want any more challenges added to the complexity I was already experiencing with my car . So I’m sorry I can’t provide definitive answer
Question:	Can I just use the bass knob from the amp and not the Line Out Converter ? Keep seeing bad reviews on the bass knob that comes with the LOC
Answer:	It does not. It came with two screws and and strip of 3M tape.
Question:	Does this LCO90 unit include line splice clamps
Answer:	The adapter has a female s-video plug, but included with it is an s-video (male to male) adapter cable so you can plug it into your DVD player.

Product features

SCOSCHE LOC90 Car Stereo 2-Channel Audio Adjustable Level Lineout Converter

The SCOSCHE LOC90 2-channel adapter line output converter allows you to connect a receiver with no preamp outputs to an amplifier car audio setup without speaker-level inputs. The LOC90 handles a speaker-level signal up to 80 watts RMS per channel, then converts it to a line-level signal you can plug into your amp's input. This speaker wire to RCA converter is compatible with high power car stereos up to 80 watts per channel.

Easy to Install

Provides amplifier remote turn on output without removing car stereo.

Output Conversion

Converts car audio speaker wire outputs to RCA Cable outputs.

Add a Subwoofer System

Works with high power car stereos (up to 80 watts per channel) to add subwoofer bass systems to any car stereo.

Channel Adjustments

2-channel adapter with independent left or right channel level adjustments and signal sensing.

Additional Channel

Allows the addition of 2-channel or mono amplifiers to factory or aftermarket stereos.

Remote Bass Knob Control

Mountable bass level controller to adjust car subwoofer bass audio level from the dash.

About SCOSCHE Industries

Founded in 1980, SCOSCHE was born from, and runs on our passion for cool vehicles, amazing sounds, the great outdoors, travel, motor sports, horsepower and voltage. We’re a company of gear-heads, drivers, surfers, racers, riders, tech buffs, tech users, innovators, and relentless pursuers of perfection. We never get stuck in the past or in the mud.

Product description

Specification:

Item Type: Audio ConverterCondition: 100% brand newColor: BlackMaterial: AluminumInput: USBOutput: R/L/stereoSystem Requirements: For Windows 10/Windows 8.1/8/Windows 7/Windows Vista/Windows XP/Mac OS X/PS4/Windows 2000 or higherDistortion: THD + N: 0.006% (RL> 10kΩ)SNR: ≥102dbDynamic Range: ≥102dbFrequency Response: 16,24 Bit 32k, 44.1k, 48k, 96,192khzEarphone Impedance/Output Power:16ohm/281mW32ohm/222mW64ohm/144mW300ohm/38mWOperating Temperature: 0 ℃ to 70 ℃

Package List:

1 x Converter1 x USB Cable1 x User Manual

• USB DAC audio converter with analog output. It can output to headphone, and can be directly used as USB sound card.
• The USB audio sound card adapter is a highly flexible audio interface that can be used with a laptop or desktop computer.
• Compatible with all major operating systems, suitable for Windows 10/8.1/8/7/Vista/XP/Mac OS X/PS4/Windows 2000 or higher.
• No driver or external power supply required, plug and play for instant audio.
• Easy to use. Just plug the audio adapter into a USB port and then plug the headphone into the adapter.

Product description

Feature:

1. And power on/off, volume adjustment can be controlled with a button, and the knob can amplify the volume.

2. Through the memory function, even if the storage capacity is turned off before the power is turned off, there is no need to increase the volume from naught during another playback time.

3. 192KHz/24‑bit support for sound sources enjoying higher resolution than CD sound quality.

4. For built‑in HIFI power amplifier chip, 16‑300Ω HI‑FI headphones can support.

5. Digital TV, high‑definition digital audio equipment, CD players, DVD players, for Blu‑ray players, game consoles, will be used in devices without for (L/R) terminals, such as a computer.

6. Optical (optical) digital input signal format/coaxial (coaxial) corresponds for PCM/LPCM.

Spec:

Condition: 100% brand new

Item type: Digital to Analog Audio Amplifier

Material: aluminum 

Color: As picture shown

Weight: Approx. 234g 

Input: coaxial or optical digital audio

Output: R/L (audio output connector)

Audio input connection: for Toslink, 1xfor (coaxial)

Audio output connection: 2xfor (right/left)

Support sampling rate 44.1 32., 48-96KHz playback

Power input: AC 100-240V 50/60Hz

Power supply: 5W (maximum)

Input terminal: 1 × coaxial digital (coaxial) terminal, 1 × optical digital (SPDIF /for  Toslink) audio terminal analog output: 1 x for RCA (L / R) terminal, 1 × 3.5 mm earphone terminal

Digital output: 1 x coaxial digital (coaxial) terminal, 1 x optical digital (SPDIF / for Toslink) audio terminal Sampling rate: at 32kHz, 44.1KHz, 48KHz, 96KHz, 192KHz, 24 bits

Input power: DC 5V

Package List:

1 x Digital to analog audio converter

1 x USB line

1 x User Manual

1 x Cable

• Digital TV, high‑definition digital audio equipment, CD players, DVD players, for Blu‑ray players, game consoles, will be used in devices without for RCA (L/R) terminals, such as a computer.
• Through the memory function, even if the storage capacity is turned off before the power is turned off, there is no need to increase the volume from naught during another playback time.
• 192KHz/24‑bit support for sound sources enjoying higher resolution than CD sound quality.
• And power on/off, volume adjustment can be controlled with a button, and the knob can amplify the volume.
• For built‑in HIFI power amplifier chip, 16‑300Ω HI‑FI headphones can support.

Product description

Features:

1.Gold plated connectors to ensure there is a high quality connection.

2.Small jack plug to large jack plug converter.

3.Premium quality, no loss of sound.

Description:

1.It converts a 3.5mm jack into the larger 6.3mm (1/4 inch) jack.

2.Ideal replacement or spare for your headphones.

Specification:

Connector A: 6.35mm (1/4") Stereo Jack Male

Connector B: 3.5mm (1/8") Stereo Jack Female

Color:red

Size: 80*60*10mm



Package Includes:

1 *Adapter



Notes:

1. Due To The Difference Between Different Monitors, the Picture May Not Reflect The Actual Color Of The Item. We Guarantee The Style Is The Same Colorful In The Pictures.

2. Due To The Manual Measurement And Different Measurement Methods, Please Allow 1-3cm Deviation. Thanks!

• 1.Gold plated connectors to ensure there is a high quality connection.
• 2.Small jack plug to large jack plug converter.
• 3.Premium quality, no loss of sound.

Product description

TROND External USB Audio Adapter Sound Card, USB connects to laptop, desktop pc, Surface, PS4,

• Bypasses a faulty sound card or audio port of your computer to regain audio function so that you can avoid the hassle or save the high cost of replacing a failed sound card
• Compatible with Windows 10/8.1/8/7/Vista/XP, Mac OS X 10.2 or above, PS4, Linux, and Google Chromebook, Windows Surface 3 pro. Incompatible with the USB port on your TV or car
• Plug-N-Play - no driver required & USB bus-powered. Stays connected to a USB hub or dock to avoid repeated unplugging
• USB TO 3.5MM AUX ADAPTER. It enables you to connect your existing phone/gaming headset (TRRS plug), audio headphones or external microphone (TRS plugs) to your laptop or PS4 through a USB 2.0 Type A interface
• All TROND products come with an 18-Month products warranty.

Product description

Specification:

Condition: 100% brand new

Item Type: Car Equalizer

Color: Black

Material: Plastic, Metal, Electronic Components

Power Source: 10-14.4V DC

Input Current: 0.5Amp Maximum

Output Level: +16dBu

Distortion: 0.01% THD at 1V Output

Frequency Response: 10Hz-30KHz±30dB

S/N: >90dB

Sparation: >60dB

Adjust: +12dB 

Size: Approx. 180x135 x30mm/7.1x5.3x1.1in                                          



Package List:

1 x Car Equalizer1 x Accessory1 x Description2 x Bracket2 x Screw4 x Bolt

• ❄☀Excellent performance: The advanced equalizer will provide 7-band equalization and sound customization, and the frequency can be adjusted between 50Hz to 16kHz.
• ❄☀Excellent performance: The advanced equalizer will provide 7-band equalization and sound customization, and the frequency can be adjusted between 50Hz to 16kHz.
• ❄☀Super function: With special subwoofer electrical level output, it is easy to enhance the control of the subwoofer. There is an auxiliary input on the back for playing other audio sources, and you can play your favorite music.
• ❄☀Professional design: Involving the bracket, it can be installed on the dashboard, under the console or any suitable position.
• ❄☀Easy to install: Easy to install, you can immediately enhance the audio experience of the device. Simple installation, just install and use, can provide you with a lot of convenience. Practical and easy to use. You will need such a utility.
• ❄☀Note: For detailed product parameters, please refer to the instructions.