12 best clarion crossovers

Clarion crossovers are audio components used in car audio systems to divide the audio signal into different frequency ranges and direct those ranges to the appropriate speakers. These crossovers play a crucial role in optimizing sound quality and ensuring that each speaker in the car audio system reproduces the frequencies it is designed for. Here's what you should know about Clarion crossovers:

  1. Frequency Dividing: Clarion crossovers use electronic circuitry to divide the incoming audio signal into different frequency bands. Typically, the signal is separated into low, mid, and high-frequency ranges.

  2. High-Pass and Low-Pass Filters: Crossovers include both high-pass and low-pass filters. High-pass filters allow higher frequencies to pass through while blocking lower frequencies, sending them to speakers like tweeters and midrange drivers. Low-pass filters allow lower frequencies to pass through, sending them to subwoofers or woofers.

  3. Speaker Matching: By directing specific frequency ranges to the appropriate speakers, Clarion crossovers ensure that each speaker is reproducing the frequencies it can handle most effectively. This helps prevent distortion and improves overall sound quality.

  4. Adjustability: Many Clarion crossovers offer adjustable settings, such as cutoff frequencies and slope adjustments. These settings allow users to fine-tune the crossover points to match the specific characteristics of their car audio system and speakers.

  5. Slope Types: Crossovers often include different slope options, such as 12dB/octave or 24dB/octave. The slope determines how quickly the frequencies are attenuated outside the specified range. A steeper slope provides more precise control.

  6. Crossover Types: Clarion offers various crossover types, including passive crossovers and active crossovers. Passive crossovers are typically installed between the amplifier and speakers and are adjusted based on the speaker's specifications. Active crossovers are more flexible and are often found in car audio systems with dedicated amplifiers. They offer greater control over crossover points and slopes.

  7. Bi-Amping: Some Clarion crossovers support bi-amping, a setup where different amplifier channels are used for specific speaker ranges (e.g., one amplifier for tweeters and another for woofers).This allows for even more precise control and tuning.

  8. Installation: Clarion crossovers are typically installed in the car's audio system between the head unit or amplifier and the speakers. Proper installation and adjustment are crucial to achieving optimal sound quality.

  9. Compatibility: When choosing a Clarion crossover, it's essential to ensure compatibility with your car audio system, speakers, and amplifier setup. Additionally, consider the power handling capabilities and impedance matching for the components.

  10. Sound Quality: A well-designed and correctly configured Clarion crossover can significantly enhance the sound quality of your car audio system by reducing distortion and ensuring each speaker operates within its optimal frequency range.

In summary, Clarion crossovers are integral components of car audio systems, responsible for dividing the audio signal into appropriate frequency bands and directing them to the right speakers. Their adjustability and control options allow users to tailor the sound to their preferences and optimize the performance of their car audio setup.

Below you can find our editor's choice of the best clarion crossovers on the market
  

Clarion MCD360 2/3-Way 6-Channel Electronic Crossover w/ 5-Volt RCA Outputs + Subwoofer Equalizer

Clarion Mobile Electronics

Based on 632 reviews Check latest price

Product description

3-way Elec Crossover

  • 3-way Electronic Crossover
  • 2/4/6 Channel Input
  • 6-Channel / 5 Volt RCA Outputs (Front/Rear/Subwoofer)
  • Front/Rear/Subwoofer Lever Control
  • Subwoofer Equalizer and Boost Level Controls
  • 6/4/2 Channel RCA Inputs
  • 6-Channel / 5 Volt RCA Outputs (Front/Rear/Subwoofer)

User questions & answers

Question: Is the actual "crossing-over" done with those adjustable restistors used to select the frequency? Are those of equal quality to a fixed crossover
Answer: All I can tell you is I have had this crossover multiple times over the last 15 or so years and this time when I first installed it, it worked just fine for the money but it seems like over time it loses it's ability to do it's job and then it just stops. The highs will just go out and the bass boost and lows will work just fine. I think it is a design flaw that they will never correct because you don't pay them enough money for a really good product I guess. But as long as you just want medium performance this think is ok but it's not the best.
Question: Just I whant now Shipping weight
Answer: Hello, Just to be on the safe side, let's say 7 pounds. Thank you.
Question: May i use this in home studio to send low freq( 20hz-15ohz) to sub, the rest to monitors
Answer: Yes. Just make sure the crossover outputs aren't so high that it causes your amplifier to distort.
Question: Can I connect the speakers directly to this crossover or is an amp required? I'm not looking to rattle anyone's windows
Answer: You will need an amplifier. Preferably an amplifier with RMS power least abilities so the amp will be less. The crossover is an addition to the amplifiers frequency and bass gain! Extremely a game changer when adding it to your amplifier. It can diliver deep bass that is unreachable with just an amplifier alone.

Product features

Clarion MCD360 2/3-Way 6-Channel Electronic Crossover w/ 5-Volt RCA Outputs + Subwoofer Equalizer

This versatile 3-Way Electronic Crossover offers inputs for two- or three-way system setups with rear fader control. Users also get a wired remote subwoofer level control.

  • 2/4/6 Channel Input
  • 6-Channel / 5 Volt RCA Outputs (Front/Rear/Subwoofer)
  • Front/Rear/Subwoofer Lever Control
  • Subwoofer Equalizer and Boost Level Controls
  • High-Pass Crossover Frequency Multiplier
  • Remote Subwoofer Level Control (Included)
  • Gold Plated Terminals
  • Dimensions:6″(W) × 3/4″(H) × 7″(D)

CLARION MCD360 3-Way Electronic Crossover

Check latest price

Product description

CLARION MCD360 3-Way Electronic Crossover 2 4 6 channel input 6-channel 5V RCA outputsfront, rear sub Front, rear sub level control Subwoofer equalizer boost level controls High-pass crossover frequency multiplier Remote subwoofer level control Gold-plated terminals Dim .75 H x 6 W x 7 D

Clarion EQS755 7-Band Car Audio Graphic Equalizer with Front 3.5mm Auxiliary Input, Rear RCA Auxiliary Input and High Level Speaker Inputs

Clarion

Based on 1 reviews Check latest price

Product description

The EQS755 is 1/2-DIN chassis Graphic EQ w/ built-in low-pass filter. Equipped with a full-featured 7-band Graphic equalizer, you will enjoy superior control over the audio spectrum with frequency adjustments in the 50 Hz to 16 kHz range over seven bands. This gives you the power to get the most of your sound system, and the ability to contour the sound output to your musical taste.

  • 1/2-DIN chassis graphic equalizer with built-in low-pass filter6-channel/ 8-Volt RCA outputs (front, rear and subwoofer)7-ban graphic equalizer (50Hz, 125Hz, 315Hz, 750Hz, 2.2Khz, 6Khz, 16Khz)
  • 3.5mm Front aux input2-channel RCA aux input with variable gain adjustments and high level speaker inputs
  • Blue illuminationindependent master volume and subwoofer level Control with fader control select able 12Db low-pass Filer (60Hz or 90Hz)
  • Ground loop isolation circuit Dimensions: 7"(w)x4-1/4"(l)x1"(h)

User questions & answers

Question: What size are the screws
Answer: Do not know. But it is well made and probably not need of repair for a long while to come.
Question: Can you hook this up to subwoofer and door speakers? Got 3000watt ssl evo amp and 2500watt audiotek for doors. Please help
Answer: Yes ,I guess so
Question: does this amp remove distorcion and make speakers louder
Answer: Yes it's a 2 channel equalizer
Question: Does this double as a line converter for factory sterols without RCA outputs
Answer: I ordered these twice and got 5 pieces with each order

NEW AUDIOPIPE XV-3XP 3-WAY Electronic Crossover With Line Driver + Bass Knob

Audiopipe

Based on 57 reviews Check latest price

Product description

We are an authorized Audiopipe dealer! AUDIOPIPE **XV 3XP** 3 WAY Electronic Crossover with Line Driver

  • NEW AUDIOPIPE **XV 3XP** 3 WAY Electronic Crossover with Line Driver
  • High grade metal casing
  • Great look and functionality
  • Mountable bass knob included
  • POWER SOURCE: 14.4 VOLTS DC NEGATIVE GROUND

User questions & answers

Question: How many volts are outputs
Answer: Its a 12v unit
Question: Is the woofer direct or mixed input
Answer: It's direct if you bring straight from Sub output.

Taramp's CRX 4 4 Way Compact Electronic Crossover

Taramp's

Based on 92 reviews Check latest price
  • Compact
  • 4 channels
  • Customizable sound adjustments
  • Dimensions: 190 x 145 x 40mm
  • Weight: 560 grams

User questions & answers

Question: what comes in the box does it have a knob like the bass knob
Answer: Just the unit itself. No bass knob or provision for one. If you are looking for a crossover with a bass knob, I'd recommend the Cadence Acoustics CXR7 3-way crossover.
Question: Can it be use as a 3 way crossover like other 3 ways or not
Answer: Dear customer. You can use 3 way output this isn't a problem.
Question: It looks like one side of the crossover , mainly the lows and mids are split mono and and the high mids and highs are stereo, any answers, strange set
Answer: Yes you are correct, Taramp has an upgrade unit that offers 3 levels in stereo Mid high & low as well as Tweet, the.Woof is still mono

Taramp's CRX5 5-Way Electronic Crossover

Taramp's

Based on 46 reviews Check latest price

Product description

Five-Way Electronic Car Audio Crossover System * Routes quantity - 4 + 1 Pass Thru * Via Pass trhu (R + L) * Phase Selectable 0/180 Degrees * Variable level -infinity to + 6dB * Via Low (L + R) Mono * Subsonic Filter Selectable (Bypass / 40/60 / 80Hz) (-24dB / 8th Butterworth) * Low Pass Filter 100Hz to 2kHz variable (-12dB / 8th Linkwitz-Riley) * Bass Boost Variable 0 to +10 dB (40 Hz) * Phase Selectable 0/180 Degrees * Variable level -infinity to + 10dB * Via Low Mid (R + L) Mono * High Pass Filter 30Hz to 600Hz variable (-12dB / 8th Linkwitz-Riley) * Low Pass Filter 600Hz to 10KHz variable (-12dB / 8th Linkwitz-Riley) * Phase Selectable 0/180 Degrees * Variable level -infinity to + 10dB * Via High Mid (R and L) Stereo * High Pass Filter 400Hz variable to 3KHz (-12dB / 8th Linkwitz-Riley) * Low Pass Filter Variable 5KHz to 20KHz (-12dB / 8th Linkwitz-Riley) * Phase Selectable 0/180 Degrees * Variable level -infinity to + 10dB * Via High (L and R) Stereo * High Pass Filter Variable 2 KHz to 10KHz (-12dB / 8th Linkwitz-Riley) * Phase Selectable 0/180 Degrees * Variable level -infinity to + 10dB * Input Impedance 10K Ohms * Output Impedance 470 Ohms * Maximum Input Level R / L 4 57 V RMS @ (+15 4 dBu) * Maximum Output Level R / L 9 3 V RMS @ (+21 6 dBu) * Level Max Pass Thru Output R / L 9 3 V RMS @ (+21 6 dBu) * Frequency Response (-1dB) from 10Hz to 100KHz * Total Harmonic Distortion (THD) 85dB * Power supply 10 5 to 16 VDC * Nominal consumption 420mA @ 12 6 VDC * Protection System Polarity Reversal * Dimensions (WxHxD) 238 x 42 x 145mm * Weight 0 70Kg

  • Taramp's CRX5 5-Way Electronic Crossover
  • Built-in Subsonic Filter
  • Bass Boost
  • Selectable Phase

User questions & answers

Question: I have 2 mid amps, 1 lows amp and 1 highs amp...4 amps in totall will this work for them
Answer: Yes. Will
Question: How do the knobs work? Are they fixed points? Or is the adjustment really variable
Answer: It’s very good
Question: I have this crossover and I have a question from my clarion eq I have 3 rca running out into the crossover but the crossover only has 2 inputs
Answer: Hi Irvin, yes this is the only problem when using this taramp crossover. You can use only 2 outputs from your eq .
Question: puedo conectar tuiter y bajo
Answer: Si puedes

Audiopipe EQ-709X 7-Band Graphic In-Dash Equalizer

Audiopipe

Based on 71 reviews Check latest price

Product description

Every true audiophile should be able to tweak their sound system however they'd like to get the perfect sound. The Audiopipe EQ-709X 7-Band Parametric Graphic Equalizer can help get you there. The universal half-DIN-sized chassis gives you clean mounting options above or below most decks if you have room and the gold-plated RCA input connectors ensure that you always get the most signal. You'll even be able to control the volume of your subwoofer output independently with this EQ. Put yourself in the driver's seat of your music and system with the Audiopipe EQ-709X 7-Band Parametric Graphic Equalizer.

  • USER-FRIENDLY: Nickel-plated locking adjustable knobs for user-friendly operation
  • CUSTOMIZED CONTROLS: Adjustable subwoofer frequency and subwoofer output and level controls for customized use
  • EASY INSTALL: Universal half-DIN chassis for ease of installation
  • ADJUSTABLE SENSITIVITY: Active gain pre-amplifiers with adjustable input sensitivity for maximum performance
  • SPECIALIZED CONTROLS: Individual left and right sensitivity controls for auxiliary input

User questions & answers

Question: How many input and outputs
Answer: Have not received it as of yet
Question: ese equalisador silve en el puesto del crossover
Answer: Tú quieres un EQ o un crossover ? Son 2 cosas diferentes
Question: What are the Dimensions for this Equalizer
Answer: 6 3/4 x 4 3/4 x 1

Clarion EQS755 7-Band Car Audio Graphic Equalizer with Front 3.5mm Auxiliary Input, Rear RCA Auxiliary Input and High Level Speaker Inputs

Based on 925 reviews Check latest price

Product description

7-Band Graphic Equalizer 50Hz, 125Hz, 315Hz, 750Hz, 2. 2kHz, 6kHz, 16kHz 6-Channel / 8-Volt RCA Outputs (Front, Rear, and Subwoofer) Blue illumination Gold-plated contacts for optimum signal transfer Master and subwoofer volume control 3. 5mm Front AUX Input 2-Channel Rear RCA AUX Input with Variable Gain Adjustment Selectable 12dB Low-Pass Filter (60Hz or 90Hz) Fader Control Ground Loop Isolation Circuit RCA and High Level Speaker Inputs Dimensions: 7. 00"W x 4. 25"D x 1. 00"H

  • 7-Band Graphic Equalizer 6-Channel / 7 Volt RCA Outputs (Front/Rear/Subwoofer)
  • Adjustable Master Volume Level Control Adjustable Subwoofer Level Control
  • 2-Channel RCA AUX Input with Adjustable Gain Selectable 12dB Low-Pass Crossover (60Hz or 90Hz)
  • Gold Plated Terminals Dimensions:7"(W) × 1"(H) × 4"(D)
  • This unit is exclusively for vehicles with a negative ground, 12V battery system.

User questions & answers

Question: Does this equalizer support stereo
Answer: Stereo just means a left and right channel as compared to "mono", which means a single channel. So, yes, this EQ does have left and right channels. No, radio or stereo that I know of today has just a single channel, unless it has one speaker.
Question: Where would i find a mounting kit to house this and a single din head unit in a double din opening
Answer: It come with a kit for mounting it to something mines is under my ash trash.
Question: will this run main and aux at the same time because i have a four channel amp and obviously front play diffrent sounds than the rear
Answer: The signal that comes out of your head unit is the same whether it is front or rear (90 percent true). That is why running the two outputs from the head unit to the EQ and then the EQ four outputs to the amp will not change anything. The only sound differential you will have is your fader,tone,treble settings which you can control and adjust with the EQ. NOW THAT BEING SAID. This true for 90 percent of the head units out there. I know my head unit has HPF and LPF filter setting and bass curves for the sub channel. You are losing all those. The only signal signal will be for the two that you hook up to the EQ.
Question: will this fit in a single din dash (2001 chevy silverado) with a deck
Answer: i realize this is an old question but for anyone with a 99-02 silverado, this is for you: you can use a single din head unit with a 1/2 din in dash eq. You simply need to get a dash kit that has single din plus eq. metra used to make one for 1999-2002 silverados but it was discontinued a while ago. the part number is Metra 99-3003. idk if scoche or AI makes or used to make one but i DO know that metra 99-3003 works. you can still find them around the internet. i just bought one for a buddies truck.

Product features

Clarion EQS755

  • 7-Band Graphic Equalizer (50Hz, 125Hz, 315Hz, 750Hz, 2.2kHz, 6kHz, 16kHz)
  • 6-Channel / 8-Volt RCA Outputs (Front, Rear, and Sub-woofer)
  • Blue Illumination
  • Independent Master Volume and Sub-woofer Level Control with Fader Control
  • 3.5mm Front AUX Input
  • 2-Channel RCA AUX Input with Variable Gain Adjustment
  • Selectable 12dB Low-Pass Filter (60Hz or 90Hz)
  • Fader Control
  • Ground Loop Isolation Circuit
  • RCA and High Level Speaker Inputs
  • Dimensions : 7"(W) x 4-1/4"(L) x 1"(H)

7-Band Graphic Equalize

Equipped with a full-featured 7-band graphic equalizer, you will enjoy superior control over the audio spectrum with frequency adjustments in the 50 Hz to 16 kHz range over seven bands. This gives you the power to get the most of your sound system, and the ability to contour the sound output to your musical taste.

DS18 DS-XM3 Two-to-Three Way Electronic Crossover with Remote Control

Based on 35 reviews Check latest price

Product description

Full power and control means adding the right processor to your system. The 7-band graphic equalizer with selectable main and auxiliary inputs, subwoofer-level controls, line-level outputs, and 6-channel/7-volt RCAs is by far the best processor. The 5-band version and a 2/3 way, mobile, audio electronic crossover with remote control capable of managing the most complex amplifiers and systems.

  • The DS18 XM3 is a 3-Way Active Crossover w/ x20 Frequency Multiplier Switch
  • Remote Sub-level Control 0-180 Degree Subwoofer Phase Switch Butterworth 12dB/octave Slopes Detente Frequency Selection Controls Gold RCA Input and Output Connectors
  • Power, Ground and Remote Connector PWM Power Supply LED Power Indicator Bass Boost

User questions & answers

Question: Does this increase voltage coming out the output side? Like a line driver would
Answer: no. you will need a line driver too
Question: When using this ds18 ds-xm3 do i need to purchase a ds18 pro-cfx two-way passive crossover
Answer: This unit is already a x-over so I'm not sure what you are asking.

Massive Audio EQ9 – 9 Car Equalizer with 9 Band Graphic Equalizer - Aux Inputs - 7V RCA Outputs - 18dB Crossover

Massive Audio

Based on 365 reviews Check latest price
  • TOP RATED CAR AUDIO EQUALIZER | The Massive EQ9 is a half din 9 Band Graphic EQ that will correct peaks and dips in sound characteristics associated with most vehicles' interior that dampens and limits both speaker output and imaging. This EQ provides powerful features in a compact size.
  • MORE TUNING CONTROL | With Stellar features such as: Adjustable Master Volume Level Control, Adjustable Active Gain Preamp, 2-Channel RCA Input with Adjustable Gain, 9 Band Graphic Equalizer, 1/2 DIN, 8V Output Line Driver, RCA Auxiliary Inputs, 6-Channel/ 7V RCA Outputs, you can take full control on how you like your music to sound Clearer, Better, Perfect!
  • SAY GOODBYE TO WHITE NOISE | Don't waste your time or money on cheap quality Car Audio Equalizers that produce a lot of background noise. With Subwoofer Output Built-in 18dB per Octave electronic X-Over fixed @ 60Hz or 120Hz, and Extended Frequency Response from 20Hz~30Hz/100dB S/N, you're sure to get great crossovers and perfect sound quality.
  • EASY TO INSTALL. LONG LASTING. | The Massive Audio EQ9 Band Car Audio Graphic Equalizer is easy to install and produces amazing results for years! The EQ9 is the perfect device to enhance your Car Audio's performance, and the Best Car Equalizer in its class! Dimensions: 7"(W) " 1"(H) " 4 1/8"(D)
  • MASSIVE AUDIO QUALITY | Since 1999, Massive Audio has been an industry leader in high performance audio products. Massive Audio laid its roots in high quality audio reproduction through in-house engineering and a dedication to customers.

User questions & answers

Question: How hard is it to hook up a equalizer to my Kenwood car stereo
Answer: Depends - But I'd imagine that if you are capable of installing the HU then the EQ should be just as easy. Has the 3 typical: power. ground, remote and then the input and output(s) <-- or whatever way you plan on using the EQ. All else fails, go to YouTube and watch one of the many videos. I tried "how to install a car EQ" and it came back with "about 347,000 results" I bought this EQ and am extremely pleased with what I got for the price of this thing. Buy it. figure out to install it. It is worth it
Question: Would this make a huge difference with 4 6.5 mids and 2 tweeters
Answer: It definitely would. Thats exactly what I have
Question: This can be used to take the 2 rca inputs from head unit and make them multiple rca outputs for a 5 channel amp
Answer: Yes, I have 2 AMPs connected to it. I have a 4 channel 1000 watt Rocksford Fosgate AMP pushing the highs and mids to the 6x9s and door speakers. And I have a 8000 watt Power Accoustik AMP pushing the Bass. The 1st knob is independent bass that controls my Power Accoustik AMP. The 2nd Knob is the overall volume. So the answer is Yes. It controls my 4 channel AMP and my Mono AMP at the same time.
Question: Does thing have separate inputs channels for front and rear speakers
Answer: Having trouble with my 4 channel head unit (Alpine) - I have separate front and rear L/R RCA outputs coming from the head - I plugged the front RCA outputs into the "main" which works ok, but no place to plug in the rear output RCA cables....

Product features

EQ9 Car Audio Equalizer

The Massive EQ 9 is a half din 9 Band Graphic EQ that will correct peaks and dips in sound characteristics associated with most vehicles' interior that dampens and limits both speaker output and imaging. This EQ provides powerful features in a compact size.

American Bass 3-Way Active Crossover

American Bass

Based on 57 reviews Check latest price

Product description

American Bass Way Active Crossover. Front High Pass (x1): 35Hz-400hz (-18dB/OCT). (x20) 700Hz-8Khz (-18dB/OCT). Rear High Pass: 35Hz-400Hz (-18dB/OCT). Subwoofer Low Pass: 45Hz-250Hz (-18dB/OCT). Outputs Level: 8V Peak. Frequency Response: 10-50KHz(-3dB). S/N Ratio: 110dB. THD: 0.01%. Input Impedance: 20k Ohms. Output Impedance Less Than 150Ohms. Channel Separation More Than 70dB. Subsonic Filter On/Off With -24dB/OCT. At 25 Hz. X-Over Slope Low Pass/High Pass: -18BD/OCT. Power Source: 11-15 Volts DC Negative Ground.

  • Brand New & Factory Original!

User questions & answers

Question: Does this product come with the bass knob
Answer: Yes

Skar Audio SKA7EQ 7 Band 1/2 DIN Pre-Amp Car Audio Graphic Equalizer with Aux Input and High Voltage RCA Outputs

Skar Audio

Based on 164 reviews Check latest price

Product description

Skar Audio engineered the SKA7EQ 7 band 1/2 DIN car audio graphic equalizer so that you can finally take full control over your car audio listening experience, dialing the sound into perfection. Featuring two sets of RCA inputs (main and a selectable auxiliary input), this EQ takes your input signal and allows you to modify and adjust the sound to your liking. The output signal is then delivered via the high voltage (up to 7V max) pre-amp RCA outputs for the Front, Rear, and Subwoofer channels (the subwoofer out-put channel features an independent volume control knob on the front of the unit as well). 7 fully adjustable -12 dB to +12 dB EQ bands (50 Hz, 125 Hz, 320 Hz, 750 Hz, 2. 2 kHz, 6 kHz, 16 kHz) with built-in fader control.

  • 6 Channel 7-Band High Performance Car Audio 1/2 DIN Pre-Amp Electronic Equalizer
  • Featuring 2 (Balanced & Selectable) RCA Inputs - Main and Auxiliary (Aux w/ Variable Gain Control) | THD: 0. 005%
  • High Voltage (Max Output Voltage - 7V) Gold Plated Pre-Amp RCA Outputs - Front, Rear, and Subwoofer (with Variable Subwoofer Level Control on Front of EQ)
  • 7 Fully Adjustable -12 dB to +12 dB EQ Bands (50 Hz, 125 Hz, 320 Hz, 750 Hz, 2. 2 kHz, 6 kHz, 16 kHz) with Built-in Fader Control
  • Take Full Control Over Your Car Audio System with this EQ | Signal-to-Noise Ratio: 100 dB, Low Pass Frequency Switch: 60 Hz / 120 Hz
  • Includes Installation Mounting Brackets and Hardware | 20 dB Headroom Eliminated Signal Overload
  • Included components: Installation Brackets and Hardware

User questions & answers

Question: How would you wire this to a head unit that has a front, rear and subwoofer channel? Would you only use the front and rear and toss the other set of r
Answer: So with only one input from the head unit does the eq convert it to front and rear sound? What I mean do you loose the rear sound or does it just double and split the front channel?
Question: Does this product light up
Answer: Yes it lights up blue cleaned up my audio very well
Question: Anyone els experiencing a popping noise when you take key out ignition if so any ideas on how i can stop it? I already tried grounding it to radio
Answer: Had the same issue with ankther brand EQ. Problem went away when I switched the positive from the EQ and attached it to the yellow cable straight to battery not the red to ignition. That should fix it.
Question: How would you do the power wire i see theres one in picture with a fuse but isint that to short
Answer: Hello, No the Red wire with fuse holder is not to short. The longer side of the Red wire goes to the Scar SKA7EQ, On Back of the SKA7EQ is the power, ground, and Remote terminal. The Red wire will be extended with a 14awg wire to your power source. Source could be the car battery, or an Accessory fuse circuit of 10 amps 12volts DC current. Extending this red wire is Normal in the audio installation world. The coupling will be needed to successfully butt the two wires together and crimp both sides, if u like install the double red wire size with Heat Shrink Tubbing, then Couple the wires with the "Butt Connector" , slide the heat shrink over it and heat the heat shrink with a Heat Gun, or powerfully hair dryer, then run the Red wire to the Accessory, or Battery positive Red Terminal. The same thing for the ground wire, black wire has no fuse in line so Run from your battery Negative Terminal Black, to the Scar SKA7EQ next to the Red wire, and Tighten it down to the SKA7EQ. The Remote wire is "In the business of Audio Installation" Traditionally Blue, Or Purple, Strip 4mm, or 3/8" and Install it into the Scar SKA7EQ at the R terminal, R stands for "Remote" or "Trigger" this Blue, Or Purple wire goes to your amplifier, and at the amplifier you will see a Positive terminal, a Negative Terminal and the R, "Remote" terminal the Blue or Purple Remote wire tightens onto the amp in the R terminal spot. The wire should be all 14 AWG for this. Wiring your amps u should at least use 4awg for both Power and Ground, Directly to the car/boat/atv Battery. Use small spools of OFC Copper, Red Positive, Black Negative, and Blue/Purple Remote from amazon, You have to have Amplifiers in your system to use the SKA7EQ. Get an Amplifier install kit, plus the three spools of 20ft of 14 AWG Red, Black, Blue from amazon....Good Luck.

Latest Reviews

View all