9 best jvc class d amplifiers

Product description

JVC's DRVN Series car amplifiers are all about power… with style. These amps feature aggressive looks, strong value, and plenty of power packed into a rugged housing. The DRVN KS-AX3205D 5-channel amplifier, for example, can power your whole system with 50 watts RMS for each of your front and rear speakers, along with up to 300 watts RMS for a subwoofer. Or, you can put the KS-AX3205D into 3-channel mode and run a pair of high-power components with 130 watts RMS each and still have that 300 watts RMS available for a sub.

• GENERAL FEATURES: DRVN Series 1000 Watt max power 4-channel car amplifier for a two pair of speakers or one pair of speakers + bridge 2-channels for a single subwoofer
• SOLID SOUND QUALITY: Features Toroidal Transformer power supply that ensures smooth sound at any volume range
• EASY INSTALLATION: Attaches directly to factory systems using speaker-level inputs with signal-sensing turn-on to eliminate remote turn-on wiring
• SPECS: RMS Power 60w x 4 (4 ohm), 90w x 4 (2 ohms), 180w x 2 (Bridged 4 ohm), 80 dB Sound Pressure Level, 8 gauge
• OTHER FEATURES: DRVN Series built for HIGH POWER and BUILT STRONG for lasting durability

User questions & answers

Question:	Hi! I am intended use this amp with factory low impedance Bose speakers; It is the amp capable for that
Answer:	I'm using this amp to drive two 12" Kenwood subs in a ported box. The subs are 4ohm each ran in parallel to get the circuit down to 2ohm. If you were going to run a single 12, I would suggest a dual 4ohm voice coil model, as this amp runs full power at lower impedance.
Question:	Do you have to upgrade on the altornater on your car to use this amp
Answer:	Two 2ohm speakers will drop it to 1ohm. I have this amp, and it works GREAT on one 2ohm memphis 12 sub. If you have two 4ohm 12s, this would be a match. It would cut off and get really hot running at 1ohm.
Question:	Does this amp come with the bass control knob
Answer:	Yes
Question:	While the car is off, is the green light still supposed to be on
Answer:	Depends on size and draw of sub I'm running a bazooka tube 6 inch and it does well for my needs.

Product description

The KS-DR3001D 800W Mono class D amplifier is designed to provide a large amount of power to control the even the biggest of the subwoofers. The built-in protection circuitry reduces loss of voltage to deliver clear sound with less distortion for natural powerful music playback. The amplifiers feature speaker level inputs with Auto Turn-on function, for easy installation without having to detach head unit.

• RMS Power Rating: 4 ohms: 250 watts x 1 chan. / 2 ohms: 400 watts x 1 chan.
• Max power output: 800 watts
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Speaker-level (high-level) inputs
• Power On Indicator (GREEN)/Protector Indicator (OFF)

User questions & answers

Question:	Is this amp bridgeable
Answer:	This amplifier doesn't have the power for these type of subwoofers. You run the risk of th e amp over heating or going into protect mode
Question:	Would this amp go well with the mtx terminator 12” subs or is there a better amp to go with those subs
Answer:	hi its fred this amplifer is great but at 2 ohms it put max 1000 watts rms max max.

Product description

JVC KS-AX204 AX2 Series 4-Channel Amplifier with 600 Watts Max power output is the ideal choice for connecting two sets of car speakers, subwoofers, or a combination system. Measuring in at roughly 12" x 7.5" x 2", the KS-AX204 can fit under seats, trunks due to its low-profile design. It features high- and low-level inputs for connection to a factory or aftermarket stereo plus a low-pass filter for use with a connected subwoofer. Includes a variable input RCA level control and speaker input control. Versatility of 4-, 3- or 2-channel operation allows to be used with most vehicle stereo systems. The class- AB amplifier has continuous power output of 40W x 4 at 4 ohms, 60W x 4 at 2 ohms and 120W x 2 at 4 ohms bridged, so you are ready to BOOM.

• GENERAL FEATURES: AX2 Series compact 600 Watt max power 2-chanel car amplifier for single subwoofer or set of coaxial or component speakers
• SOLID SOUND QUALITY: 3-way protection circuitry with Bass Boost (off-low-high)
• EASY INSTALLATION: RCA level and Harness level inputs with easy to fit 7-15/16" x 2" x 7-3/8" form factor
• SPECS: RMS Power 40w x 2 (4 ohm), 60w x 2 (2 ohm), 120w x 1 (Bridged 4 ohm) 2-8-ohm load impedance, 80 dB Sound Pressure Level, 8 gauge
• OTHER FEATURES: Wired Bass Boost level control for precise sound adjustment

Product description

Universal DRVN Series Class AB 4-Channel 800W Amplifier by JVC. Make the most out of your sound system with this cutting-edge JVC amplifier. Designed to provide you with an amazing audio experience, this workhorse delivers massive power and ensures a high-quality signal without irritating noise thanks to a MOSFET power supply and other top-end features. This amp will give you impressive bass boost and help your system create a cleaner, more lifelike sound.

• RMS Power Rating: 4 ohms: 60 watts x 4 chan. / 2 ohms: 90 watts x 4 chan. / Bridged: 4 ohms: 180 watts x 2 chan.
• Max power output: 800 watts
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Speaker-level (high-level) inputs
• Power On Indicator (GREEN)/Protector Indicator (OFF)

Product description

Description of KS-DR1004D: Conformal Coating A conformal coating is a protective chemical coating to safeguard electronic circuits from harsh environments that may contain moisture or chemical contaminants. It provides a barrier to airborne contaminants from the operating environment, such as salt-spray, thus preventing corrosion. Circuit Separation Construction Separated circuit boards of the Pre-amp and Power-amp sections contribute to a reduction in radiation noise. Large LPF Coil The large LPF coil provides a stable, high-quality sound with no distortion even when playing at high volume. Variable HPF & LPF Incorporates a rotary type HPF and LPF which enables fine adjustment. Compared with fixed type switching, more precise sound adjustment is possible to match your preferences. Specifications: Amplifier Maximum Power Output 400W RMS Power Output (4 ohm) [ 1% THD 14.4V] 45W x 4 (20 - 20,000Hz) RMS Power Output (2 ohm) [ 1% THD 14.4V] 45W x 4 (1,000Hz) RMS Power Output (Bridged 4 ohm) [ 1% THD 14.4V] 90W x 2 (1,000Hz) Class Class-D Signal-to-Noise Ratio (reference: 1W into 4 ohms), CEA-2006 Compliant > 82dB Load Impedance Load Impedance Allowance 2 - 8 ohms HPF 50Hz - 200Hz (-12dB/oct) LPF 50Hz - 200Hz (-12dB/oct) RCA Input Ach L/R, Bch L/R High Level Input (Speaker Level Input) Yes High Level Input Auto Power Control (Signal Sensing Turn On) Yes Input Sensitivity 0.2 - 5V Dimensions (W x H x D) 145 x 45 x 99 mm (5-11/16" x 1-3/4" x 3-7/8") Weight 0.7kg (1.5lbs)

• VERSATILE: JVC’s marine and motor sports receivers and amplifiers feature compact size for versatile installation even in tight spaces
• DURABLE: Built tough with Conformal coated main PCBs (printed circuit boards) offer additional protection against moisture and condensation from damaging the product
• VARIABLE HPF & LPF: Compared with fixed type switching, more precise sound adjustment is possible to match your preferences
• SMALL BUT POWERFUL - Compact 4-channel amplifier for car, motorcycle, and boat 45 watts RMS x 4 at 2 to 4 ohms. 90 watts RMS x 2 bridged at 4 ohms Class D amp technology that is CTA-2006 compliant
• QUALITY SOUND - Separated circuit boards of the Pre-amp and Power-amp sections to reduce radiation noise, A Large Low Pass Filter coil provides stable, high quality sound with no distortion even when playing at high volume

Product description

Have more fun in the sun with JVC's KD-MR1BTS marine digital media receiver. A 2.7" color display makes it easy to dial in stations or weather band info on the radio's global tuner. JVC incorporates a USB input so you can access your favorite music files, while built-in Bluetooth lets you stream music from your smartphone. Get ready to rock the water. This compact stereo fits in a standard 3" console gauge hole. No CD player, but full connectivity to virtually all smartphones, flash drives, and MP3 players. Stream your music wirelessly via Bluetooth or charge and play music from your device via USB. Waterproof (IPX6 rated) resistant to rain splash and spray 2.7" full-color dimmable display 200 watts peak power (50 watts x 4 channels) AM/FM/WB radio with 18 FM, 12 AM, and 6 Weather Band presets NOAA weather channel reception for safety 7 Band graphic EQ with 8 envelope presets RCA aux inputs for patching in the audio from any external source SiriusXM satellite radio ready (requires SXV300 satellite receiver and antenna, sold separately) Rear USB port for recharging devices and playing audio files Bluetooth music streaming iPhone and Android compatible via USB and Bluetooth Backup camera compatible Front Panel Dimensions: 4-9/16 x 4-3/16 x 1-9/16 inches (115 x 106 x 39 mm) Cutout Diameter: 3-1/16" (77 mm) Mounting depth: 2-15/16" (74 mm) 2 pairs of RCA pre-amp outputs for sending a clean signal to an amplifier (front and rear) 1-year manufacturer warranty

• READY FOR WATER: Equipped with a weather-resistant, UV-stable face and controls that will stand up to sun, salt and moisture. Waterproof Rating of IPX6. Withstands jets of water from any direction thanks to IPX6 waterproof compliance.
• IPHONE COMPATIBLE: If you're an iPhone user, JVC makes it easy to make the most of your stored music. You'll be able to listen to saved music, music apps, and other audio content on select Apple devices with wired connection via USB
• REAR VIEW CAM INPUT: Backup cams are just about the most handy thing on earth, even in a boat or UTV. JVC equips the KD-MR1BTS with a rear-view camera input so you can add a view of what's behind you.
• CONFORMAL COATING: Is a protective chemical coating to safeguard electronic circuits from harsh environments that may contain moisture or chemical contaminants. It provides a barrier to contaminants such as salt-spray, thus preventing corrosion.
• OPTIONAL REMOTE: Add control to your radio elsewhere in the boat with JVC's wired remote control (not included) RM-RK62M

User questions & answers

Question:	Product dimensions: 5.5 x 6.8 x 9.8 inches ??how would this fit a utv ? rockford fosgate pmx-3 has these dims. h4.2" x w4.5" x d2.9" i know fits
Answer:	very nice and compact all depends on space to mount on dash board and clearance behind .mine was flush mounted on a boat

• Mono subwoofer amplifier
• 500 watts RMS x 1 at 4 ohms (1, 000 watts x 1 at 2 ohms)
• Class D amp design
• Speaker-level inputs with signal Sensing turn-on
• Variable low-pass filter (50-200 Hz at 24 dB per octave)

User questions & answers

Question:	Can this amp power 3 alpine w10s4 subwoofers
Answer:	The digital channels 30-1, 30-2, 30-3 and above are technically on the same broadcast channel. In the antenna world, the broadcast channel is not necessarily the same as the number that shows up on your TV.In Detroit, where we are 4.1 is NBC and the sub-channels 4.2 and 4.3 come along with it. However it is broadcast on a channel VHF 7 in our area. You can use websites like antennapoint.com to find out the broadcast channel, which is often referred to as an RF channel or REAL channel. This device was designed after the digital transition, and is fully capable of finding and fine tuning.
Question:	im having a hard time findin a nice amp for my (2)15" kicker 2-ohm 1200w subs. i got acheap pyle 2000 watt amp and its not pushin nearly what i want
Answer:	basily the pickup ability
Question:	Will this power 4 Kenwood 5 way 6x9 speakers
Answer:	The HD7694P measures 65" long.
Question:	When setting the gain on my amp, do I set bass knob remote included all the way up or all the way down? (Not talking about the bass boost on the amp
Answer:	This wall plate amplifier provides amplified antenna signal to 2 TV sets. It does not provide 12V DC to the antenna. The 12V DC to the wall plate amplifier provides power to the amplifier and to the 12V DC socket on the plate as a convenience to power 12V DC items. The signal from the antenna is amplified to improve reception for 2 TV sets. In a typical RV installation with more than 2 TV outlets, one output from the amplifier is fed to a signal splitter in order to fed the extra outlets. That splitter may be installed inside the wall behind the wall plate amplifier. If the amplifier is turned off the amplifier switches to the cable source if connected, but does not amplify the cable signal. Here is a link to the manual. http://www.winegard.com/kbase/uploads/2451489.pdf

Product features

Kenwood KAC-9106D - Reliable performer

Kenwood makes tough, rugged amplifiers that bring you superior sound quality along with reliable performance. When you power your subwoofer with Kenwood's Performance Series KAC-9106D amplifier, you'll hear all the great tonal color, impact, and detail in your music's bass, from the hard punch of the rhythm section to the soft thump of a quiet kick drum.

CEA-2006 Compliant:

CEA-2006 is a system of testing and measurement for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4Ω load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range of 20 Hz to 20 kHz (for full range amplifiers). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4Ω. CEA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples). Using CEA-2006 criteria, the Kenwood KAC-9106D is rated at 500 watts RMS x 1 channel with a 76 dBA signal to noise ratio. The signal to noise ratio at the rated power output (not CEA-2006 conditions) is 100 dB.

Connections:

Power Connections: The power and ground connections are 0.55" wide screw terminals. The remote turn-on screw terminal is 0.335" wide. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended. The manual lists a minimum of 10 gauge wire for power and ground, but given the 120 amp fuse value and the current consumption specification of 65 amps, we recommend a 4 gauge wiring kit.

Speaker Outputs: There are two pair of 0.335" wide screw terminal speaker outputs; they are internally wired in parallel, making it easy to connect two subwoofers. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are also recommended for the speaker wires.

Controls:

Gain: To accommodate the varying range of signal levels from today's factory and aftermarket radios, the KAC-9106D features an adjustable gain control, 0.2-5.0 volts line level (RCA) and 4.0-12.0 volts speaker level.

Crossover: The built-in 24 dB/octave low-pass filter has a continuously variable crossover point, 50Hz to 200Hz. Because this is a subwoofer amp, the crossover is always engaged.

Bass Boost: The bass boost is adjustable from 0-18dB at 40Hz.

Product description

The dB15 is a class D monoblock high power amplifier with 6,000 watts peak output, 3,000 watts RMS output, and 1500 watts CEA-2006 rated power. All of the mono amplifiers in the dB series are 2 ohm stable. They are all CEA-2006 compliant, which makes it easy to compare this amplifier to other CEA compliant amps on the market. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. So we provided 3 ratings for all of our car amplifiers. We provided a CEA compliant rating, which you should use to compare this amplifier to other premium brands that make CEA compliant products such as Kicker, Rockford Fosgate, Kenwood, Pioneer, etc. We also supplied an RMS rating that is not CEA compliant, but has become standard in the industry. You should use this rating when comparing with ratings from brands such as Hifonics, Earthquake, DB Drive, etc. Lastly, we also supply a peak rating which almost all brands in the industry provide. This peak power is the amount of power the amp puts out at the loudest moments during a particular song.



One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. The dB15 features a Maxi fuse with a rating of 150 Amps. Although we rate these conservatively at 1500 watts CEA @ 2 ohms, this amplifier puts out more power than this!



This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The dB15 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.

• Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
• Rockville dB15 6000 Watt/3000 Watt RMS Mono Class D 2 Ohm Car Stereo Amplifier With Optical Coupler Technology. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.). 2 Ohm: 1500 Watts x 1 Channel <1% THD+N. 4 Ohm: 900 Watts x 1 Channel <1% THD+N.
• RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.). 2 Ohm: 3000 Watts x 1 Channel. 4 Ohm: 1800 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 6000 Watts x 1 Channel. 4 Ohm: 3600 Watts x 1 Channel.
• High-Speed MOSFET Power Supply . Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System.
• RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: 90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 150 Amp Maxi Fuse. Dimensions: (W x H x L)9˝ x 2.4˝ x 17.8˝.

User questions & answers

Question:	Should i run 2 of power acoustik gw3-10 10" dual 2 ω 1000w rms subwoofer's on the rockville db15 6000 watt/3000w rms mono class d 2 ohm amplifier
Answer:	Yes, when you tune the same frequency between FM transmitter and the car radio,and connect Bluetooth from your phone, then it will play your YouTube music.
Question:	Can i use this amp for a 12 rockford fosgate p
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Yes, it works with the Siri （Please active the Siri on your phone at first). Please see the video.
Question:	will this make 2 2000watt 10inch boss subs hit
Answer:	Nope
Question:	Will this amp be able to my two 12inch alpine type r
Answer:	No

Product features

Rockville dB15 6000 Watt Peak/1500w CEA RMS Mono 2 Ohm Amplifier Car Audio Amp

Description:

The dB15 is a mono amplifier with 6,000 watts peak output and 1500 watts CEA-2006 rated power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the CEA rated RMS rating can be used to compare with brands who rate their items using the CEA standard such as Kicker, Rockford, Alpine, etc.

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. The dB15 features a Maxi fuse with a rating of 150 Amps. Although we rate these conservatively at 1500 watts CEA @ 2 ohms, this amplifier puts out more power than this! This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The dB15 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels. The RCA input accepts both balanced and un-balanced inputs. If there is potential inference in the car, the balanced input signal is less susceptible to noise. The dB amps by Rockville use the top parts and components recommended by Rockville’s very own engineer. These amps are the best sounding out of any series we have ever created. They perform more efficiently resulting in even dB of sound. We created them to be 2 ohm stable just like the world’s most famous amps by Rockford Fosgate, Kicker, etc. If you compare our amp to the most famous amps you will find our amp can compete and, in my opinion, surpass the performance of anything in its class.

Product description

ZEUS has been delivering incredibly powerful and very affordable car audio amplifiers to the mortal car audio enthusiasts of Earth for decades. Technological advances like SUPER D-CLASS and now FULL RANGE SUPER D-CLASS have given ZEUS amplifiers the Power From The Gods. The SUPER D-CLASS digital chip technology provides extremely efficient, low temperature, high system power in order to run cool from 4-Ohm to 2-Ohm.

• SUPER CLASS D AMP - This 1200 Watt, 1 Channel, 1 ohm amplifier has been developed over four decades of engineering to deliver the highest level of sound quality and power efficiency.
• TEMPRATURE CONTROLLING HEAT SINK - The UltraFi MOSFET designed specifically for music production helps limit distortions and effectively cools the amplifier by transferring to the Aluminum alloy Heat Sink.
• HIGH QUALITY OUTPUT CONNECTIONS - The connections can affect audio quality which is why we designed the best, with nickel plated high temperature impact resistant connections and hex screw terminals. Erosion resistant and withstands rigorous use.
• BASS REMOTE INCLUDED - Adjust the bass frequencies from the control which can be mounted anywhere in your vehicle. Create a custom look with the smooth potentiometer and ringed illumination in a satin black finish.
• MILITARY GRADE - Amplifier is made with military-grade PCB to be rugged enough to hold up to regular use. It is protected against overloads and short circuits so you can use it with confidence.

User questions & answers

Question:	Can this amp push 2 8” sundown SA
Answer:	Yes. For the most power wire them to 1ohm if possible
Question:	Will this amp push 2 12 jl audio w3v3 at 4 ohm
Answer:	Hello, Yes this amplifier would do a very good job of powering your jl audio w3v3 subwoofers. Thank you.
Question:	Anybody have the zrx1216.1d zeus 1200 watt can tell me if it will push two 10 inch skar subwoofers & at what ohms? thanks
Answer:	Yes it will. You can run it @ 1 ohm and get the full 1200. Or @ 2 ohms and get 600w. I'm runing it mono on a single 12" sub @ 2 ohms and it sounds like thunder. I'm thinking about changing my box for one with two 10" woofers.
Question:	will the 1200 watt amp work for my DC m3 8inch sub
Answer:	If you want to push 700 watt to it only then yeah if looking for more power then look up the brx or brz series low price n high output power