10 best boss audio preamps

Product description

• Front Adjustable EQ Band Frequencies: 125 Hz, 500 Hz, 3.5 kHz, 12 kHz
• Rear Adjustable EQ Bands Frequencies: 50 Hz, 600 Hz, 6.3 kHz
• Switchable Subwoofer Filter 32 Hz – 128 Hz, Frequency Response 10 Hz – 15 kHz
• Inputs: Dual 2 Channel Source. Outputs: Front, Rear & Sub. Fader Control
• Gain + / - 18 dB, Maximum Input Voltage 15 Volts, Maximum Output Voltage 8 Volts
• Signal to Noise Ratio > 110 dB, Channel Separation 20 dB, Total Harmonic Distortion 0.050
• Dimensions: Depth 4.6” x Width 7” x Height 1”

User questions & answers

Question:	Do it have a soft or hard trun on
Answer:	Soft turn on
Question:	Can I use this from phone or mp3 music player to my marine amp/Sub and 4 powered 2-way speakers? Or just to amp
Answer:	If you know what do you can make it work.
Question:	I have a 4k watt amp , 8 farad capcitor , soundstream epicenter , will this product be able to replace my epicenter or just enhance my sound further
Answer:	It will work as both equalizer and epicenter. Having both epicenter and equalizer enhance your sound quality to the maximum standard as long as you have good quality speakers. Am using both epicenter and equalizer and my sound quality is booming.
Question:	Can you use without car amps
Answer:	No

Product description

The BOSS Audio BX45 has been designed and built to deliver excellent sound quality and long lasting high performance. We are sure you'll enjoy listening to your favorite music with this BOSS component in your car audio system. For best results please consult a professional car stereo installer for application advice or troubleshooting. To guarantee top performance we recommend using The BOSS Link installation accessories such as RCA interconnects, power cable, and speaker wire. Thank you for choosing BOSS Audio Systems products for your auto sound system. We can't change the world, but we can make it sound better.

• CROSSOVER SLOPES: 3-way electronic is a high-fidelity signal processor that allows you to divide a stereo audio input signal into 3 separate channels. Subwoofer crossover is a low-pass filter designed to limit the subwoofer channel to low frequencies
• VARIABLE BASS BOOST 0 – 12 DB: By connecting the BX45 to your amplifier, you will have total control of exactly how you want your bass to sound, as well as your mid-level and high-level frequencies, giving you the pristine listening experience
• PARALLEL INPUT: If you set the subwoofer input mode selector switch to the ON position, front stereo input will be delivered to the crossover. You can create a very sophisticated 3-way audio system with only a pair of stereo input from your head unit
• VARIABLE CROSSOVER: Variable Subwoofer Filter 32 Hz – 250 Hz, Variable High Pass Filter 40 Hz – 8 kHz. Has been designed and built to deliver excellent sound quality and long lasting high performance. Gives massive improvements to clarity/ distortion
• DESIGNED TO IMPRESS: A thoughtful layout and clean design that gives you the user experience you've been wanting. Provides the perfect frequency distribution throughout your system to ensure the clarity and peak efficiency for your music arrangement
• Media Type: Cd+Rw

User questions & answers

Question:	Will this item work a home theater setup 5.1? I'll use it to bi-amp my two front speakers
Answer:	It's a 12 volt setup... if you can wire up a adapter for power I'm sure you could use it in a home system
Question:	does it come with remote bass knob
Answer:	Naw just the crossover
Question:	Can I use the highpass filter for a subwoofer? I want to be able to limit how low my subwoofer can go
Answer:	It is setup to be used with a subwoofer. I think the idea is with the subwoofer crossover on and with the dial from 40 to 400Hz it will only let that freq and lower to pass through, while with the switch off it does not filter. The high pass filter doesn't apply to the subwoofer unless the parallel input mode switch has something to do with it. I am not sure we even have the same crossover. I used mine as a preamp to my mid and highs amp. I bypassed it with my subwoofer.
Question:	What's the difference between this, the bx35 and bx
Answer:	Wattage
Question:	Will the PH-4000 watt be enough to power one of these? Thinking of two amps two subs
Answer:	Yes, it will do - or get the Stealth 5000.1 from us Jeff Trax Audio American Audio Distributor
Question:	What will be a good amplifier for two of these subs
Answer:	Yes the Stealth 5000.1 OR the COMP 2800.1
Question:	Is this a 1 or 2 ohm sub-woofer
Answer:	These are Dual 2 ohm so if you wire in paralell you get 1 ohm. If you wire in series you get 4 ohms We can get you a Dual 1 ohm which wired in Series gives you 2 ohms Which do you want? Trax Audio

Product description

BOSS Audio Systems BX55 2 3 Way Pre-Amp Car Electronic Crossover with Remote Subwoofer Control

• Front / Rear / Sub Input, Front / Rear / Sub Outputs, Remote Subwoofer Control
• Front High Pass Filter 65Hz to 4.5 kHz, Rear High Pass Filter 65Hz to 4.5 kHz
• Variable Subwoofer Filter 40 Hz – 4200 Hz, Variable High Pass Filter 65 Hz – 4.5 kHz
• Crossover Slope 12 dB / Octave, Variable Subwoofer Phase 0 – 180 Degrees
• Variable Bass Boost 0 – 18 dB, Variable Bass Boost Frequency 25 Hz – 250 Hz
• Maximum Input Voltage 4.5 Volts, Maximum Output Voltage 9 Volts, S / N Ratio 110 dB, THD 0.010
• Dimensions: Depth 6.5” x Width 8.8” x Height 1.5”
• 1 Year Warranty

User questions & answers

Question:	How many volts are the outputs? I have 8v outputs and id rather use my amps built in crossovers if this is going to reduce the voltage
Answer:	I am not sure. But... I am using two of these to drive one 4 channel amp, two 2 channel amps and 2 monoblock amps. All of them are different brands and none of my crossover outputs nor my amplifier inputs are at max. So in conclusion, it/they have enough.
Question:	how many amps can work with this cross over
Answer:	You can control three amps with this cross over.
Question:	Can I used this together with an equilizer for better sound on my car
Answer:	Yes will sound great
Question:	so if i got Boss amps will i need a Boss crossover
Answer:	Not really unless you want to keep all the equipment the same.

Product description

The New 2/3 Way Electronic Crossover by BOSS. Make other drivers green with envy by a loud and perfectly clear sound out of your vehicle. Top shelf amplifiers are all you need to increase the volume of music without distortion as well as power your woofers or subwoofers. The wired remote subwoofer level control, mountable for easy access, has long been a popular feature on many of our amplifiers. The remote allows you to control the output level of the subwoofer(s) as needed for optimum sound according to your personal taste and listening environment. A subsonic filter is designed for use on subwoofers. Since not all subwoofers can reproduce the same low frequencies, the subsonic filter can be set for optimum bass response in order to keep the driver playing efficiently. The included Boss AVA1210 7-band equalizer includes led power meter and night illumination. An equalizer gives you precise tone control and can fine-tune a high-end system. Improve your system by eliminating noises from unwanted sounds from your car or road. The led power meter and gold plated RCA connectors really make this equalizer look like something special. It includes EQ Bands of 40Hz, 150Hz, 1khz, 20kHz with a dual 2 Ch source input. It also includes front, rear and sub outputs. Protect your system with the boss AVA1210!

• ELECTRONIC CROSSOVER: BOSS BX55 2/3 Way Electronic Crossover; 2/3 WAY ELECTRONIC CROSSOVER; INPUTS: FRONT, REAR AND SUBWOOFER; OUTPUTS: FRONT, REAR AND SUBWOOFER; SELECTABLE CROSSOVER FREQUENCIES
• SPECIFICATIONS: SUBWOOFER: 45HZ 4.2KHZ; LOW PASS (BANDPASS): 300HZ 4.6KHZ; REAR HIGH PASS : 65HZ 4.5KHZ; FRONT HIGH PASS : 65HZ 4.5KHZ; VARIABLE BASS BOOST, 0 +18DB; SLOPE RATE: 12 DB/OCTAVE; SIGNAL TO NOISE RATIO: >110DB
• PREAMP EQUALIZER: BOSS AVA1210 7-Band Preamp Equalizer with Subwoofer Output; Bands: 7; Adjustable Eq Bands: Front 125hz, 500hz, 3.5khz, 12khz; Rear: 50hz, 600hz, 6.3khz; Type: Pre-amp
• SPECIFICATIONS: Inputs: Dual 2 Ch Source; Outputs: Front, Rear & Sub; Subwoofer Filter: Switchable 32 Hz Or 128 Khz; Subwoofer Level Control; Fader Control; Gain: ±18 Db; Maximum Input Voltage: 15 V; Maximum Output Voltage: 8 V; Frequency Response: 10 Hz To 15 Khz; S/n Ratio > (a-weighted): 110 Db; Channel Separation:20 Db; T.h.d. (total Harmonic Distortion):0.05 %
• CHASSIS TYPE: Half-din

Product description

The BOSS Audio BX35 has been designed and built to deliver excellent sound quality and long lasting high performance. We are sure you'll enjoy listening to your favorite music with this BOSS component in your car audio system. For best results please consult a professional car stereo installer for application advice or troubleshooting. To guarantee top performance we recommend using The BOSS Link installation accessories such as RCA interconnects, power cable, and speaker wire. Thank you for choosing BOSS Audio Systems products for your auto sound system. We can't change the world, but we can make it sound better.

• Front / Rear / Sub Input, Front / Rear / Sub Outputs
• Front High Pass Filter 65 Hz to 4.5 kHz, Rear High Pass Filter 45 Hz to 1.6 kHz
• Variable Subwoofer Filter 40 Hz – 250 Hz, Variable High Pass Filter 45 Hz – 5 kHz
• Crossover Slope 12 dB / Octave, Variable Subwoofer Phase 0 – 180 Degrees
• Variable Bass Boost 0 – 18 dB, Variable Bass Boost Frequency 25 Hz – 250 Hz
• Maximum Input Voltage 4.5 Volts, Maximum Output Voltage 9 Volts, S / N Ratio 95 dB, THD 0.010
• Dimensions: Depth 8” x Width 7.4” x Height 1.5”
• 1 Year Warranty

User questions & answers

Question:	Can this works for high mids
Answer:	Lows + mids + highs = yes Lows + mids + mid highs = yes Lows + mid highs + highs = yes Lows + mids + mid highs + highs = no
Question:	Does it matter what size amps
Answer:	No it's just a signal crossover.
Question:	can this work as an amp, and if so, whats the max watt output
Answer:	It is not an amp but go's inline before your amp
Question:	Will this increase the signal to the amp (Add a little volume
Answer:	Yes to the first question. Volume I am not to sure that it does.

Product features

Why Do I Need A Crossover?

Speakers reproduce sound based on high, low, or mid-range frequencies. This process is called the crossover effect and occurs because the vast majority of audio systems cannot cover the entire spectrum sufficiently to minimize sound distortion and maintain an appropriate frequency ratio.

A lot of amplifiers have either a built-in 'variable' crossover so that you can set the frequency at exact sound specifications or a 'fixed' crossover.

By connecting the BX35 to your amplifier, you will have total control you exactly how you want your bass to sound as well as your mid level and high level frequencies, giving you a pristine listening experience.

Product description

BOSS Audio Systems BRT14A ATV UTV Sound Bar System - 14 Inches Wide, IPX5 Rated Weatherproof, Bluetooth, Amplified, 3 inch Speakers, 1 Inch Horn Loaded Tweeters, Easy Installation for 12 Volt Vehicles

• Bluetooth - The built-in Bluetooth lets you stream your music library from your smartphone or MP3 player or use apps such as Spotify and Pandora
• RGB Illumination - Change the colors of the dome light with the included wireless remote control. Control things like the speed, color, mode, brightness and more. It looks great, especially at night!
• Weatherproof - The latest weatherproofing techniques have been utilized so that if the weather decides to be anything but sunny, you can keep on riding. The IPX5 rating makes sure of that
• Amplified - The two 3” speakers and two 1” horn loaded tweeters are powered by a high performance built-in 300-watt class D amplifier
• DSP - Digital Signal Processing takes your input and tweaks it so your system sounds better. It specifies which frequencies of your music goes to the tweeter, woofer or sub
• Auxiliary Input - Compatible with the audio output of iPods, iPhones, smartphones and MP3 players
• Pre-Amp Outputs - If you are looking for more sound, the pre-amp outputs let you connect multiple systems together

User questions & answers

Question:	If you buy multiple, can you sinc them to work together
Answer:	Hi, unfortunately no. This is a stand-alone unit, once it is connected to a power source may start pairing your device. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PLUTV43BTA for more details. Thank you.
Question:	Does it have a volume control
Answer:	Hi, the unit has a built-in 800 watts amp. All you have to do is to connect it to a power source and it will work. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PLUTV43BTA for more details. Thank you.
Question:	Can I have two of these synced to one device
Answer:	Not sure! I returned mine!
Question:	Could i connect this in series? I would like to install three on my vehicle and be able to play my music via bluetooth on three unitsat the same time
Answer:	Hi, that will depend on the model number. You have to connect the speaker to a 400 or amp with higher wattage. Thank you.

Product features

IPX5 Rated

The IPX5 Rating means that the equipment will be protected against low pressure water stream from any angle.

Class D built-in amplifier

Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps. Systems with a built-in amplifier do not require the addition of an external amp. They already have the power to play louder.

Bluetooth Audio Streaming

Wirelessly stream audio via Bluetooth so you can listen to streaming music services such as Spotify and Pandora and control the track and volume up/down and play/pause through your system.

DSP Processor

Facing several acoustical challenges in the off road environment a state of the art digital signal processor (DSP) is utilized to dynamically control the audio, no matter the volume or environment. Since not all speaker systems are created equal, each model has been specifically tuned for superb performance without compromise.

Plug and Play

Easily installed by simply plugging into a 12V power source using the included installation kit.

Fully Marinized

High-tech, state-of-the-art weatherproofing materials plus special UV coatings for plastic surfaces, coated circuit boards and connections ensure these marine and outdoor products are corrosion resistant and protected against harsh elements.

Aux Input

The Aux Input allows you to connect to the audio output of an external device such as an MP3 Player or Smartphone so you can enjoy your music through your system.

Product description

The 2-pack of Boss 611UAB is a single Din mechless car receiver that has USB, SD ports, front AUX and Radio built-in. The car receiver features an active-matrix display monitor, illuminated buttons and equalizer presets, along with built-in hands-free Bluetooth and tuner preset. This car audio receiver is incredibly powerful, omitting a whopping 50 watts x 4 Max power straight to your speakers. This digital media receiver is compatible with the audio output from smartphones and MP3 players alike, plus it's a really safe option. Other radios and audio setups require manual work, but this model has Bluetooth capabilities, so you can make adjustments and change songs with your voice. Get the most out of your vehicle's audio performance with the 2-pack of Boss 611UAB Single Din USB/SD AUX Bluetooth Multimedia Radio Car Stereo Receiver.

• BLUETOOTH CAPABILITIES: Utilize built-in Bluetooth to make/answer calls with your voice, hands-free
• MEDIA PLAYBACK: Play music through your Bluetooth device or use the USB port for media types like MP3 and WMA file formats
• AUX: Digital media receiver is compatible with the audio output from smartphones and MP3 players
• POWERFUL DESIGN: Can omit 50 watts x 4 Max power from the 611UAB to power your speakers
• FRONT AND REAR PRE-AMP OUTPUTS: Uses both front and rear pre-amp outputs to hook up your speakers

Product description

Boss NX3000. 4 Onyx 3000 Watt 4-Channel Mosfet Bridgeable Amplifier with Remote

Boss Audio's newly designed Onyx amplifiers bring you every configuration you could need, for any system setup. State-of-the-art circuitry and power supply design optimize efficiency while delivering tremendous power output with plenty of headroom. The NX3000.4 is a four-channel MOSFET amp with 1500 watts x 2 peak power (bridged).

Four-Channel or Bridged Mode

Run in four-channel mode for 750 Watts x 4 peak power at 2 ohms (300 Watts x 4 at 4 ohms) or bridge at 4 ohms for 1500 Watts x 2 peak.

Trimode Operation

This allows you to send your signal to a tri-way crossover for adding a subwoofer to the front/rear two-channel output.

Remote Subwoofer Level Control

Onyx amps include a remote subwoofer level control. If you're using it to power a sub, you'll be able to quickly make level adjustments.

Line/Speaker Level Inputs

Separate line and speaker level inputs mean the Onyx can handle high-level signals from receivers lacking RCA outputs.

Built-In Crossovers

This amplifier features variable high- and low-pass crossovers, so you can adjust the sound to suit whatever speakers you're driving.

Variable Gain Controls

Allows you to match the input gain to your receiver for better sound with less distortion.

MOSFET Power Supply

For high performance with low heat.

Bass Boost

Add a little extra low-end power with 0 to +18dB of variable bass boost.

Power and Protection LEDs

Protection LEDs let you know when there's a problem.

What's in the Box

Boss NX3000.4 Amplifier, Subwoofer Level Control, User's Manual

• VARIABLE BASS BOOST: Customize the sound with Low and High Pass Crossover, Bass Boost and Remote Subwoofer Control allows you to adjust the low bass within the boost range to just the way you like it.. Bridge channels for more power and flexibility
• FULL RANGE 4-CHANNEL, MOSFET POWER SUPPLY: With 3000 Watts Max Power and MOSFET power supply, you get clean, high quality sound. This Amplifier can power a pair of Speakers or two Subwoofers 4-Ohms or two pairs of Speakers or four Subwoofers 2-Ohms
• HIGH /LOW LEVEL INPUTS: High-level inputs accept speaker output sign and low-level inputs take pre-amp output signals to allow for the addition of amps to general factory. You have the control of how much BASS you want to pump out to your subwoofer
• POWER: Maximum Power Output of 3000 Watts at 4 Ohms into one channel. MAX Power Output of 750 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• SWITCHABLE BASS BOOST: Add a little extra low-end power with built-in low- and high-pass variable crossovers;18dB bass boost. Provides flexible control over the input signal from the head unit to achieve tailored balance among power and sound quality

Product description

BOSS Audio Systems BRRF40A 40 Inch ATV UTV Audio System - IPX5 Rated Weatherproof, 8 Inch Woofer, 5. 25 Inch Speakers, Amplified, Bluetooth, Built-in LED Lights, Easy Installation for 12 Volt Vehicles

• Bluetooth - Bluetooth Audio streaming lets you play and control music and apps like Spotify/ Pandora wirelessly via the multi-function Bluetooth remote control
• Built-in LED lights - The built-in LED lights adds some extra clarity on the trails or by the campsite from dusk till drawn
• Pre-amp outputs - The Pre-Amp outputs let you connect multiple systems together
• Adjustable clamps - Multi-angle adjustable clamps fit bars from 1 5” to 2”
• Auxiliary input - 3 5 mm aux-in compatible with audio output of iPod/ iPhone smartphones and MP3 players
• Weatherproof - The BRRF40 has been outfitted with the latest weatherproofing techniques for protection against the elements
• Amplified - The speakers and tweeters are powered by a high performance Built-in 1000-Watt class D amplifier The BRRF40A fits cages ranging from 43” to 49 5”

User questions & answers

Question:	Will it fit 2020 ranger
Answer:	I’m sure it would fit but would not recommend it sounds like crap and took about a month to get it
Question:	There are two blue wires coming out from this box any idea where they connect
Answer:	One connects to the positive battery terminal. The other connects to an in-line remote. The sound bar will not work without the blue wire connected to the positive battery terminal
Question:	Does this mount right onto overhead bars on 2020 Yamaha Wolverine x2 R-spec
Answer:	You would need to measure the cage.. Fits UTV Cages from 43” to 49.5”, Multi- Angle Adjustable Clamps fit bars from 1.5” to 2” Spoiled Biker
Question:	How to turn on without dash control
Answer:	I connected it to the ignition switch

Product description

Take your audio experience up a notch with the Boss Audio Armor AR1600.4 Class A/B 4-Channel Full Range Amplifier. This powerful 2-Ohm stable amplifier features 1600 Watts Max Power with a MOSFET power supply to pump out your playlists. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover and Bass Boost. Bump up the Bass and feel the power with the Remote Subwoofer Control. Bridge channels for more power and flexibility. The Armor Series of amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience. Hit the road with the Boss Audio AR1600.4. For further product details, please scroll down.

• Power - 400 Watts Max x 4 @2-Ohms, 200 Watts Max x 4 @4-Ohms, 800 Watts Max x 2 Bridged @4 Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• High & Low Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
• Fixed High-Pass Crossover - Speakers reproduce sound based on high, low or mid-range frequencies. What the Variable High-Pass Crossover does is that it gears specifically towards “highs” such as all size speakers including mid ranges and tweeters
• Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels

User questions & answers

Question:	What is the frequency of the fixed high pass filter? What is the lowest frequency that will be played if the fixed high pass filter is on
Answer:	That should be enough to at least light the LED, it may not do much more than that. Make sure you connect the remote wire to +12v too.
Question:	what size gage wire should I use
Answer:	I'm having trouble fully understanding what you want to do, but I hope this helps: To send output from your CB to your vehicle speakers (assuming you have an input of any kind on your stereo):1. 3.5mm cable from external speaker output of CB into a LOC (Line Output Converter)2. LOC sends output to 3.5mm or RCA input jacks on front or back of stereo.To send output from your CB directly to an amplifer with just low-level inputs (like this one)1. 3.5mm cable from external speaker output of CB into a LOC (Line Output Converter)2. Output of LOC to 3.5mm or RCA input jack (3.5mm on this amp) 2a. The better option is to get a cheap amplifier with speaker-level inputs, and you won't need the LOC, like this one http://www.amazon.com/BOSS-R1002-200-watts-Channel-Amplifier/dp/B004S50ZB2/ref=pd_cp_e_1If you're wanting to drive a regular PA speaker with this amp, only use one channel for the output (left or right), since it doesn't appear to be bridgeable, and understand that this thing's only capable of sustaining 15w RMS, so use a pretty efficient speaker. Hope that helps.
Question:	How can i connect a 0 gauge power wire to this amp
Answer:	First and foremost, if your not sure where it connects at maybe you should have someone else do the install. All I'm seeing is a return on a blown amp. Now that being said it will work on your golf cart. #1 it will put more of a drain on your battery if your cart is battery operated. #2 it receives a signal from your radio and boost the signal to your speakers, therefore it mounts between the radio and speakers. #3 have someone who has a good idea of how to hook it up or you will be sending the amp back cause it won't work
Question:	Will this amp be good to run my two pyle plpw10d 10-inch 4 ohm subs
Answer:	no, this is a 3.5mm output and is not actually a 300w amp, barely 20w-40w

Product features

Flexible Power

Combine power and performance with the Boss Audio Armor AR1600.4 Class A/B 4-Channel Full Range Amplifier. With 1600 Watts Max Power and MOSFET power supply, this amplifier is ideal for your entire audio system. This 4-Channel Amplifier can power up your speakers, subwoofers or a combination of both. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Bridge channels for more power and flexibility. The Armor Series of amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Bridgeable and 2 Ohm Stable

Combine the channels of a 2 or 4 channel amplifier to provide a dramatic increase in power output.

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

Variable Low Pass Filter and Fixed High Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Fixed high-pass filter gives you the ability to filter the frequencies that pass through to the full range speakers from a fixed frequency point.

Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.