3 best boss audio amps for cars

Product description

Drive your in-vehicle audio experience up a level with the Boss Audio Riot R3002 Class A/B 2-Channel Full Range Amplifier. This 2-Ohm stable amplifier features 600 Watts Max Power with a MOSFET power supply to pump out your playlists. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover and Bass Boost. Control those Bass vibes with the Remote Subwoofer Control. Bridge channels for more power and flexibility. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Get your vehicle rocking with the Boss Audio R3002. For further product details, please scroll down.

• 300 W MAX Power @ 2 Ohm x 2 Channels
• 150 W MAX Power @ 4 Ohm x 2 Channels
• 600 W MAX Bridged Power @ 4 Ohm x 1 Channels
• Full-Range, Class A / B Topology, MOSFET Power Supply
• Low and High Level Inputs, Variable Filter, Variable Bass Boost
• Remote Subwoofer Control
• Dimensions: Depth 9.2” x Width 10.4” x Height 2.3”
• 6 Year Platinum Online Dealer Warranty

User questions & answers

Question:	will this amp power 2 6x9 500 watt door speakers and 2 rear pillar speakers
Answer:	It takes anywhere from 10 to 15 seconds depending on the object and temperature you are measuring.
Question:	Can you support two 10" subs with this one amp
Answer:	It can be used under the broiler or in any cooking mode, but it must be inserted into the center of the cut of meat you are preparing.
Question:	Can you hook 4 speakers and a sub to this amp? Or just 4 speakers and I'd need a separate one for the sub? Thanks in advance
Answer:	No hotter than you can stand to be around. It's plastic... to much heat and it melts!
Question:	whats rhe size of the amplifier
Answer:	Maybe two feet or more. Probe is in the oven and thermometer sits on counter.

Product features

Plenty of Power

Boost your in-vehicle audio experience with the Boss Audio Riot R3002 Class A/B 2-Channel Full Range Amplifier. With 600 Watts Max Power and MOSFET power supply, you get clean, high quality sound. This 2-Channel Amplifier can power a pair of speakers or two subwoofers @4-Ohms or two pairs of speakers or four subwoofers @2-Ohms. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Bridge channels for more power and flexibility. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Bridgeable and 2 Ohm Stable

Combine the channels of a 2 or 4 channel amplifier to provide a dramatic increase in power output.

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

Variable Low Pass Filter and Fixed High Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Fixed high-pass filter gives you the ability to filter the frequencies that pass through to the full range speakers from a fixed frequency point.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS Logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

Pump out the jams on your next adventure with the Boss Audio MC900B Class A/B 4-Channel Full Range All-Terrain Amplifier. This 4-Ohm stable Amplifier features 500 Watts Max Power to keep your tunes rolling. Hook your smartphone or MP3 Player up through the Auxiliary Input to listen to your playlists. Plug into the USB Port to charge your USB-Connected devices. Bluetooth Audio Streaming lets you play your favorite music apps like Pandora or Spotify. No need for an In-Dash Head Unit to play your music. Control it all with the Inline Multi-Function Remote Control. The MC900B Amplifier features weatherproof connectors to prevent corrosion and provide protection against the elements. Feel the music with the Boss Audio MC900B. For further product details, please scroll down.

• Power: 500 Watts Max x 4 @4-Ohms, 94 Watts RMS x 4 @4-Ohms
• Bluetooth: You do not need a head unit. Just power up the MC900B and hook up some speakers to it. The included Bluetooth remote control lets you stream your music via your Bluetooth device and use apps like Spotify and Pandora
• Weatherproof: The MC900B has been designed to handle some light weather conditions without giving up on you. It is great for use in ATVs and boats.
• Class A\B: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range: With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• Auxiliary in: The Bluetooth remote is compatible with the audio output from smartphones as well as MP3 players. Just plug in and start playing
• USB Charging: You can charge your USB devices using the USB charging port

User questions & answers

Question:	Issue with unit sound us coming out but it is very faint sometimes. have to delete the bluetooth connection and reinstall to work again. help please
Answer:	It is not antibacterial but it is hypoallergenic.
Question:	What are the dimensions of the remote
Answer:	I buys these regularly and they are 1 liter.
Question:	Does this amp have a 12v out that can power lighted speakers
Answer:	I bought them to refill the smaller individual pumps so I don't know about the DEB dispensers
Question:	Is there any way to adjust the settings on the amp? It doesn't seem like I'm getting full power out of mine
Answer:	These are meant for commercial dispensers but I bought them to refill the smaller pumps . Pop the blue cap,off & then the ring that held it . You do need to have the small pumps for the liquid to dispense properly as the foam .

Product features

All-Terrain Amplifier

Rev up your music on land or sea with the Boss Audio MC900B Class A/B Full Range All-Terrain Amplifier. With 500 Watts Max Power this 4-Channel Amplifier is ideal for your entire audio system. It can power up your speakers, subwoofers or a combination of both. Bluetooth technology lets you stream music apps. No need for an In-Dash Head Unit to play your music. You can control it all with the Inline Multi-Function Remote. Plug into the USB Port to charge your USB-Connected devices.

Fully Marinized

High-tech, state-of-the-art waterproofing materials plus special UV coatings for plastic surfaces, coated circuit boards and connections ensure these marine and outdoor products are corrosion resistant and protected against harsh elements.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

4 Ohm Stable

4-Ohm stable meets the power-load requirements of full-range automotive speakers and most subwoofers, which predominately feature 4 ohm impedance.

Audio Streaming

Wirelessly stream audio via Bluetooth from compatible devices so you can listen to streaming music services such as Spotify and Pandora through your system.

Pre-Amp Outputs and Low Level Inputs

This unit's Pre-Amp outputs let you expand your system by adding one amp or signal processor.

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

Aux Input

The Aux Input allows you to connect to the audio output of an external device such as an MP3 Player or smartphone so you can enjoy your music through your system.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

USB Charging

Charge USB connected devices through the built-in 1A charger.

Product description

Take your audio experience up a notch with the Boss Audio Armor AR1600.4 Class A/B 4-Channel Full Range Amplifier. This powerful 2-Ohm stable amplifier features 1600 Watts Max Power with a MOSFET power supply to pump out your playlists. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover and Bass Boost. Bump up the Bass and feel the power with the Remote Subwoofer Control. Bridge channels for more power and flexibility. The Armor Series of amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience. Hit the road with the Boss Audio AR1600.4. For further product details, please scroll down.

• Power - 400 Watts Max x 4 @2-Ohms, 200 Watts Max x 4 @4-Ohms, 800 Watts Max x 2 Bridged @4 Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• High & Low Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
• Fixed High-Pass Crossover - Speakers reproduce sound based on high, low or mid-range frequencies. What the Variable High-Pass Crossover does is that it gears specifically towards “highs” such as all size speakers including mid ranges and tweeters
• Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels

User questions & answers

Question:	What is the frequency of the fixed high pass filter? What is the lowest frequency that will be played if the fixed high pass filter is on
Answer:	That should be enough to at least light the LED, it may not do much more than that. Make sure you connect the remote wire to +12v too.
Question:	what size gage wire should I use
Answer:	I'm having trouble fully understanding what you want to do, but I hope this helps: To send output from your CB to your vehicle speakers (assuming you have an input of any kind on your stereo):1. 3.5mm cable from external speaker output of CB into a LOC (Line Output Converter)2. LOC sends output to 3.5mm or RCA input jacks on front or back of stereo.To send output from your CB directly to an amplifer with just low-level inputs (like this one)1. 3.5mm cable from external speaker output of CB into a LOC (Line Output Converter)2. Output of LOC to 3.5mm or RCA input jack (3.5mm on this amp) 2a. The better option is to get a cheap amplifier with speaker-level inputs, and you won't need the LOC, like this one http://www.amazon.com/BOSS-R1002-200-watts-Channel-Amplifier/dp/B004S50ZB2/ref=pd_cp_e_1If you're wanting to drive a regular PA speaker with this amp, only use one channel for the output (left or right), since it doesn't appear to be bridgeable, and understand that this thing's only capable of sustaining 15w RMS, so use a pretty efficient speaker. Hope that helps.
Question:	How can i connect a 0 gauge power wire to this amp
Answer:	First and foremost, if your not sure where it connects at maybe you should have someone else do the install. All I'm seeing is a return on a blown amp. Now that being said it will work on your golf cart. #1 it will put more of a drain on your battery if your cart is battery operated. #2 it receives a signal from your radio and boost the signal to your speakers, therefore it mounts between the radio and speakers. #3 have someone who has a good idea of how to hook it up or you will be sending the amp back cause it won't work
Question:	Will this amp be good to run my two pyle plpw10d 10-inch 4 ohm subs
Answer:	no, this is a 3.5mm output and is not actually a 300w amp, barely 20w-40w

Product features

Flexible Power

Combine power and performance with the Boss Audio Armor AR1600.4 Class A/B 4-Channel Full Range Amplifier. With 1600 Watts Max Power and MOSFET power supply, this amplifier is ideal for your entire audio system. This 4-Channel Amplifier can power up your speakers, subwoofers or a combination of both. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Bridge channels for more power and flexibility. The Armor Series of amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Bridgeable and 2 Ohm Stable

Combine the channels of a 2 or 4 channel amplifier to provide a dramatic increase in power output.

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

Variable Low Pass Filter and Fixed High Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Fixed high-pass filter gives you the ability to filter the frequencies that pass through to the full range speakers from a fixed frequency point.

Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.