11 best kenwood signal amplifiers

Product description

It's an increasingly common problem. You can't replace your vehicle's premium factory radio, but the premium factory amplifier isn't powerful enough for you. Furthermore, the factory amp gets digital information from the vehicle's databus and replacing the amp would mean you'd lose all audio control, like volume and balance, as well as other features like steering wheel controls, audible navigation alerts, warning chimes, and Bluetooth connection. Replacing the factory amp with Kenwood's Excelon P-XR600-6DSP amplifier along with its included iDatalink Maestro amp replacement module adds a huge amount of power and tuning ability to your system while retaining all of the vehicle's audio and communication functions.

 

Product highlights:

• 6-channel car amplifier with digital signal processing
  
  -75 watts RMS x 6 at 4 ohms
  
  -100 watts RMS x 6 at 2 ohms
  
  -200 watts RMS x 3 bridged at 4 ohms (4-ohm stable in bridged mode)
• CTA-2006 compliant
• Class D amp technology
• iDatalink Maestro AR amplifier replacement module included
• 10-channel 32-bit 192 KHz digital processor
• All controls and adjustments made via Kenwood DSP Control App via your compatible Bluetooth device
• Selectable high- and low-pass filters (31-19,900 Hz) with selectable slopes (6, 12, 18, 24 dB/octave)
• 13-band graphic and 3-band parametric equalizers
• Time delay/alignment
• Installer Mode accesses all controls
• User Mode limits functions to selecting EQ and time-alignment presets and subwoofer volume
• 4 processed preamp outputs
• Fan cooling
• Fuse rating: 40A x 2
• Dimensions: 12-5/8"W x 2-1/16"H x 7-1/8"D

• Many new cars equipped with premium amplified systems are nearly impossible to replace and very difficult to upgrade the audio performance. The XR600-6DSP when combined with an iDatalink Maestro AR can use a true stereo signal from the existing OEM stereo and translate all the CAN-Bus communication of the original radio to the XR600-6DSP. Integrates with many Chrysler, Dodge, Fiat, Ford, Jeep, Lexus, Maserati, Ram, Subaru and Toyota premium systems, with more vehicles to follow.
• Use the KENWOOD DSP Control App (compatible with iPhone and Android) to setup the XR600-6DSP. The listening position, advanced equalization and filtering can be set during installation and the setting stored in memory. A simplified mode is available for day to day use.
• The 32-Bit 192kHz DSP gives the flexibility of independent tuning and equalization that is required with the variance of speakers and location challenges being used in a typical system. The channel flexibility allows any function or tuning on all 10 channels making it one of the most versatile solution based amplifiers on the market today.
• These HEX-type terminals can accommodate up to AWG 8 - AWG 12 speaker wire thickness for better signal delivery to speakers. The HEX type design allows for maximum tightening and contact onto the wire.
• These HEX-type terminals can accommodate up to AWG 4 - AWG 6 battery and ground wire thickness for better voltage maintenance from the vehicle's battery. The HEX type design allows for maximum tightening and contact onto the wire.

User questions & answers

Question:	What wire thickness should i use for xr 600 kenwood amp
Answer:	My son used 8 gauge AWG Power wire with an attached AGU Fuse holder. He likes ton go a bit overkill though. So he used 8 gauge copper on the rest as well.

Product description

NETGEAR AC750 WiFi Range Extender (EX3700-100NAS). System Requirements:2.4 and/or 5GHz, 802.11 a/b/g/n/ac wireless router or gateway, Microsoft. Internet Explorer. 8.0, Firefox. 20, Safari. 5.1, Google Chrome 25.0 browsers or higher. Troubleshooting tip- If you cannot get a WiFi connection working, you can use an Ethernet cable to connect your computer to the extender. Data throughput, signal range, and wireless coverage per sq. ft. may vary due to differences in operating environments of wireless networks, including without limitation building materials and wireless interference. Operating temperature: 32°to 104°F.

• Extended wireless coverage: Adds WiFi range coverage up to 1000 square feet, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more
• AC750 WIFI speed: Provides up to 750Mbps performance using dual band and patented FastLane technology
• Universal compatibility: works with any wireless router, gateway, or cable modem with wifi. The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non standard or outdated
• Wired Ethernet port: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed
• Safe & secure: Supports WEP and WPA/WPA2 wireless security protocols
• Simple to setup: Press the WPS button to connect to your router. Use the NETGEAR WiFi Analyzer app for optimal location

User questions & answers

Question:	My family has two appartments next to each other, both separate electrical installations. Would this work if we wanted to split the internet bill
Answer:	Yes the EX8000 used as a wifi extender you have the option of having a guest network. You can use same SSID name as your main router or use a different SSID altogether. I did have issues with more than one extender on the same network using same SSID name as main router so I had to change one of the extenders to a different SSID.
Question:	Has anyone connected a ps4 of xbox one to the wifi from the range extender? if so, signal and game play any good
Answer:	If you mean an AT&T router signal, yes. If you mean cell tower signal, then no.
Question:	Does it create a new sid or does it exteneded your current sid, so one does not have to switch to differing networks when in range
Answer:	the input voltage is from 100 to 240 volts
Question:	I don't understand how some people give this 4-5 stars and others can't get it to work and give it 1 star
Answer:	there are 4 ports. I use multiple ones as this is the only system I can find that does not change the network name but once a year I also have one break and have to replace it or hard reset it myself.

Product features

Discrete Wall Plug Design

Plug into a wall outlet for a sleek solution that extends your router's range and stays out of sight.

Smart Connect up to 15 Devices

Intelligently selects between dual bands to minimize interference and maximize speed for your smart wireless devices.

5-Minute Setup

Connect to your existing router with one button press, connect devices to your network, and you’re done.

Connect a Wired Device, Too

One 10/100M Ethernet port lets you easily connect a nearby wired device for faster transfer and uninterrupted connection.

Universally Compatible

Works with any WiFi router for hassle-free reliability.

• New Kenwood 4 channel Bluetooth marine atv motorcycle amplifier (kacm1824bt)
• 45 watts x 4 at 4 ohms
• Peak power: 400 watts

User questions & answers

Question:	Can I connect this to a 5 prong toggle switch? I want it to turn on even when the vehicle is off
Answer:	I don't know about a 5 prong toggle switch but you definitely could with a 5-pin Bosche Relay (one with an 87a terminal). You can easily find wiring diagrams for them online, but essentially, pin-30 to the positive input to the amp, pin 87a to your accessory positive from the vehicle, pin 85 and 87 to your constant positive from the vehicle and then pin 86 to the vehicle ground with a normal toggle switch inline ... with the switch turned off, the circuit runs to pin 30 through pin 87a ... with the switch turned on, the circuit runs to pin 30 through pin 87
Question:	How (where) do I connect the blue wire since I am using this amp without a head unit
Answer:	Connect the blue wire to a power source. Ideally, the power source should be controlled by the ignition switch. This will prevent the battery from getting drained if the amp is left on. You can also connect the blue wire to the same power source as the main power lead. In this instance a on/off switch (on the blue wire) should be inserted so the unit can be turned off.
Question:	If i use bluetooth, do the line out jacks work? i want to use bt with this as the main amp but run a bazooka amplified tube via the line out jacks
Answer:	Yes because im doing the same thing on my system im using this amp for. Its a Great amp. I have it on my jet ski and can hear my speakers even at 65mph with wind noise.
Question:	How long is the cord on the remote? Thanks
Answer:	The cord is 10.5 ft long th the remote control head
Question:	just installed this amp and it is producing a smell, is this normal
Answer:	The smell can be from the new amp warming up during use (feel the temp of the amp if you smell it again to verify). If it's smokey or smells like an electrical fire/short, I'd disconnect everything and look for arcing/burn marks. You might have a stray power line that's hitting ground intermittently. Good luck. Trouble shooting can be a pain.
Question:	can this amp push 1 1500 watt kicker 12 l
Answer:	It can if you bridge it right, but later you'll want a much bigger amp. The bass is right for me. My Pioneer rms is 1400 watts for a 12" also. Hope this helps!
Question:	Will this amp power two rockford fosgate 12" punch xlc 400watt speakers (200 rms
Answer:	Yes
Question:	Would this amp push a JL sub 12w6v3d4?..with no problems. Thank you in advance
Answer:	The JL 12W6v3D4 is a dual 4 ohm voice cool. If they are wired parallel (see owner'a manual) you with have a 2 ohm subwoofer and receive the 500watts. JL recommends a 200-600 watt amp, so this amp is well within those specs.

Product features

Kenwood KAC-M1824BT - Power your music on land or sea

Kenwood's KAC-M1824BT 4-channel amplifier will pump up your car's audio system with 45 watts RMS per channel — that's more than twice the power of most car stereos. The super-compact KAC-M1824BT will add new clarity and impact to the basic sound system of almost any kind of vehicle on land or water, and it'll fit in a lot of places when space is tight. The amp uses plastic plugs that protect its power and speaker connections, and features a conformal coated circuit board that keeps out moisture and salt, so the party won't stop just because of a little wetness.

IPX5 REMOTE CONTROL

The KAC-M1824BT remote control is designed to be mounted in places that are exposed to the elements. To operate in these conditions the remote control has a IPX-5 certification. This water resistant certification is the grade at which a device continues to function when directly subjected to 12.5 L of water per minute from all directions using a 6.3 mm inside diameter nozzle at a distance of approximately 3m for at least 3 minutes. This level of water resistance makes it perfect for ATV, Motorcycles and boats.

MULTI-APPLICATION

Many of today's powersports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. KENWOOD's compact performance amplifiers are small in size so they fit even the most limited installation areas. The amplifiers also use a conformal coated main PCB (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging the product.

BUILT-IN BLUETOOTH

With today's smartphones hosting a wide variety of listening choices such as stored music, internet radio, podcasts, etc., it is no wonder that customers want to use this as their primary listening source. Bluetooth offers the easiest and most popular connection, KAC-M1824BT is not only your standalone Bluetooth gateway but if used with an in-dash receiver, it will double the power of a typical CD receiver with it's built-in 45Watts x 4 of amplification. A water resistant controller can be used to adjust volume and change tracks.

• Mono subwoofer amplifier
• 500 watts RMS x 1 at 4 ohms (1, 000 watts x 1 at 2 ohms)
• Class D amp design
• Speaker-level inputs with signal Sensing turn-on
• Variable low-pass filter (50-200 Hz at 24 dB per octave)

User questions & answers

Question:	Can this amp power 3 alpine w10s4 subwoofers
Answer:	The digital channels 30-1, 30-2, 30-3 and above are technically on the same broadcast channel. In the antenna world, the broadcast channel is not necessarily the same as the number that shows up on your TV.In Detroit, where we are 4.1 is NBC and the sub-channels 4.2 and 4.3 come along with it. However it is broadcast on a channel VHF 7 in our area. You can use websites like antennapoint.com to find out the broadcast channel, which is often referred to as an RF channel or REAL channel. This device was designed after the digital transition, and is fully capable of finding and fine tuning.
Question:	im having a hard time findin a nice amp for my (2)15" kicker 2-ohm 1200w subs. i got acheap pyle 2000 watt amp and its not pushin nearly what i want
Answer:	basily the pickup ability
Question:	Will this power 4 Kenwood 5 way 6x9 speakers
Answer:	The HD7694P measures 65" long.
Question:	When setting the gain on my amp, do I set bass knob remote included all the way up or all the way down? (Not talking about the bass boost on the amp
Answer:	This wall plate amplifier provides amplified antenna signal to 2 TV sets. It does not provide 12V DC to the antenna. The 12V DC to the wall plate amplifier provides power to the amplifier and to the 12V DC socket on the plate as a convenience to power 12V DC items. The signal from the antenna is amplified to improve reception for 2 TV sets. In a typical RV installation with more than 2 TV outlets, one output from the amplifier is fed to a signal splitter in order to fed the extra outlets. That splitter may be installed inside the wall behind the wall plate amplifier. If the amplifier is turned off the amplifier switches to the cable source if connected, but does not amplify the cable signal. Here is a link to the manual. http://www.winegard.com/kbase/uploads/2451489.pdf

Product features

Kenwood KAC-9106D - Reliable performer

Kenwood makes tough, rugged amplifiers that bring you superior sound quality along with reliable performance. When you power your subwoofer with Kenwood's Performance Series KAC-9106D amplifier, you'll hear all the great tonal color, impact, and detail in your music's bass, from the hard punch of the rhythm section to the soft thump of a quiet kick drum.

CEA-2006 Compliant:

CEA-2006 is a system of testing and measurement for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4Ω load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range of 20 Hz to 20 kHz (for full range amplifiers). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4Ω. CEA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples). Using CEA-2006 criteria, the Kenwood KAC-9106D is rated at 500 watts RMS x 1 channel with a 76 dBA signal to noise ratio. The signal to noise ratio at the rated power output (not CEA-2006 conditions) is 100 dB.

Connections:

Power Connections: The power and ground connections are 0.55" wide screw terminals. The remote turn-on screw terminal is 0.335" wide. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended. The manual lists a minimum of 10 gauge wire for power and ground, but given the 120 amp fuse value and the current consumption specification of 65 amps, we recommend a 4 gauge wiring kit.

Speaker Outputs: There are two pair of 0.335" wide screw terminal speaker outputs; they are internally wired in parallel, making it easy to connect two subwoofers. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are also recommended for the speaker wires.

Controls:

Gain: To accommodate the varying range of signal levels from today's factory and aftermarket radios, the KAC-9106D features an adjustable gain control, 0.2-5.0 volts line level (RCA) and 4.0-12.0 volts speaker level.

Crossover: The built-in 24 dB/octave low-pass filter has a continuously variable crossover point, 50Hz to 200Hz. Because this is a subwoofer amp, the crossover is always engaged.

Bass Boost: The bass boost is adjustable from 0-18dB at 40Hz.

• Digital Amplifier Technology
• Speaker Level Input w/ Signal Sensing Turn-on
• 2 Ohms Load Capability
• Power MOS-FET Switching Power Supply
• 1m (3.3ft) RCA Cable

User questions & answers

Question:	Is this amplifier waterproof
Answer:	This is a loaded question do to many people having different opinions about it. Some say the more strands allow for easier flow and less voltage drop when power consumption goes up. There are opinions all over about this topic, so I will give you what I have. I ran both positive and negative 10 awg automotive type wire, running my tower with 4 6x9 speakers and it all works just perfect. Wire run length was 17ft. The bluetooth works well but range is just about 5ft in my application.
Question:	Does it come with a volume control knob
Answer:	Hi, yes you can connect your mobile phone using Bluetooth. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PLMRA430BT for more details. Thank you.
Question:	Anyone try installing in a 2013-2015 Dodge Dart
Answer:	Yes but it’s a POS
Question:	Would I need an amp wiring kit
Answer:	I've used these amps several times. If your referring to subwoofers, you can run a low-pass filter. Using the smaller 4 channel version of this amp, I run two 6.5" speakers from channel 1 and 2, and bridge the 3rd and 4th channels to run through a low pass filter to a subwoofer. Sounds good.

Product features

Kenwood KAC-M1814 - Power your speakers on land or sea

Kenwood's super-compact KAC-M1814 will add new clarity and impact to the basic sound system of almost any kind of vehicle on land or water, and it'll fit in a lot of places when space is tight. This marine-rated 4-channel amp will pump up your audio system with 45 watts RMS per channel — that's more than twice the power of most car stereos or marine receivers. The amp uses plastic covers to protect its connections and features a conformal-coated circuit board that keeps out moisture and salt, so the party won't stop just because of a little wetness.

Plastic covered connector

Plastic covered connector helps to keep out water and dust.

Conformal Coating

Conformal Coating provides vibration resistance and helps prevent the PCB from rusting.

Circuits

Pre-amp and Power-amp sections are separated to reduce radiation noise.

Product description

They provide outstanding dynamics, holding the musical reproduction to the highest standard whether delivering impactful bass or the most detailed notes. The amplifier to your system, and you'll hear all the tonal color, impact, and detail you've been missing, from the punch of the rhythm section to the shiver induced by your favorite singer's voice.



Versatile Power

The compact 500W 2-channel amp delivers 70 watts RMS per channel to your full-range speakers. This amp will bring new life to factory speakers, but you'll really notice the difference when you pair it up with new aftermarket speakers or components, or bridge it out at 4 ohms to push 170rms x 1 to a subwoofer.

• Maximum Output Power: 500W RMS Power at 4ohms: 70W x 2ch RMS Power at 2ohms: 85W x 2ch
• Bridged at 4ohms: 170W x 1ch Frequency Response: 20Hz - 50kHz
• Low Pass Filter: 80Hz, -18dB/oct Speaker Level Input: Yes
• Signal to Noise Ratio: 100dB
• Dimensions W x D x H (mm): 230 x 167 x 56

User questions & answers

Question:	How does this do with heat
Answer:	No it's a true 5000 Is a to channel so is 25 on 1 side and 25 on other
Question:	Is it fan cooled
Answer:	Yes it is bridgeable I have my sub Brigid
Question:	Will this push my 10 in sub rated at 175 rms
Answer:	I won't even push one 2500 sub with out getting hot and shutting off cuz overheat
Question:	Is this for a car stereo or subwoofer
Answer:	Yes

• Max Power: 1000W
• RMS POWER OUTPUT (4Ω): 300W
• RMS POWER OUTPUT (2Ω): 500W
• Speaker Level Input / Signal Sensing Turn-On
• Variable Low Pass Filter / Bass Boost

User questions & answers

Question:	Will this amp push a 600rms sub
Answer:	i only used it for a sub woofer amp. it pushed a 10" well but i would get something bigger for your application.
Question:	Does this fit a chevy equinox
Answer:	As long as you don't go below 1ohm the Amp doesn't care. It doesn't have a physical switch inside labeled 1 2 4 816ohm. It's a resistivity waveform.
Question:	Can this run two 200 watt RMS speakers at 4 ohms
Answer:	I use this to push my single 10" sub. Your going to want a more high dollar amp to push those two 15"s.
Question:	How many channels is this amp
Answer:	This amp works best for subwoofers. You should look for a multi channel amp

Product features

Kenwood KAC-D5101 - Class D Mono Power Amplifier

D Series Amplifiers provide a powerful solution in a compact design, ideal for upgrading your car audio system.

Dual Sigma Drive

This advanced negative feedback circuit improves damping factor and increases accuracy and sound quality. When a signal is passed to a subwoofer, like a 50Hz note, the speaker will move and create the note. However, because the speaker has mass and a suspension, it won't stop moving once it's in motion. This extra movement (sound) creates a type of distortion that's not part of the original signal. The negative feedback circuit senses this unwanted movement and sends out an opposite pulse to stop the speaker like an electronic brake.

Small Size Big Power

The KAC-D5101 is small in size but with its tremendous sound output, it is extremely versatile. It can be installed in vehicles where space is limited and is perfect for vehicle owners who don't want to sacrifice cargo room or who prefer hidden installations.

CEA-2006 Compliant

CEA-2006 is a system of testing and measurement for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4Ω load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range of 20 Hz to 20 kHz (for full range amplifiers). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4Ω. CEA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples). Using CEA-2006 criteria, the Kenwood KAC-9106D is rated at 500 watts RMS x 1 channel with a 76 dBA signal to noise ratio. The signal to noise ratio at the rated power output (not CEA-2006 conditions) is 100 dB.

• Features: 5 Channel Amplifier. RMS Power: 50 watts RMS x 4 + 300 watts at 4 Ohms | 75 watts x4 + 500 watts at 2 Ohms | Peak Power: 1600 watts. CEA-2006 compliant, Low Pass Filter, High Pass Filter, Speaker Level Input, Signal Sensing Turn On, Bass Boost (Sub), and Dimensions: 9" W 2-3/16" H 7-3/8" D.

User questions & answers

Question:	Is this a marine amp
Answer:	Yes. I have it on a kicker 10 and two 5 1/4 so should be plenty for your needs
Question:	If i use this for subs only, and buy an amp for door spkrs later, will i get better performance/power to subs? pionr 10" shallow 300w rms to 2 subs
Answer:	As long as the subs are dual 4 ohm you can maximize the power of the amplifier at 4 ohms bridged... If they are single 4 ohm you would need to run the amp bridged and series the subwoofers to an 8 ohm load.

Product features

Kenwood KAC-D8105 - Class D 5-Channel Power Amplifier

D Series Amplifiers provide a powerful solution in a compact design, ideal for upgrading your car audio system.

Expanded Frequency Response

Supporting Hi-Res Audio, KAC-D8015 is ideal for high resolution audio playback as it features a frequency response that extends to 50kHz.

Dual Sigma Drive

This advanced negative feedback circuit improves damping factor and increases accuracy and sound quality. When a signal is passed to a subwoofer, like a 50Hz note, the speaker will move and create the note. However, because the speaker has mass and a suspension, it won't stop moving once it's in motion. This extra movement (sound) creates a type of distortion that's not part of the original signal. The negative feedback circuit senses this unwanted movement and sends out an opposite pulse to stop the speaker like an electronic brake.

CEA-2006 Compliant

CEA-2006 is a system of testing and measurement for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4Ω load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range of 20 Hz to 20 kHz (for full range amplifiers). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4Ω. CEA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples). Using CEA-2006 criteria, the Kenwood KAC-9106D is rated at 500 watts RMS x 1 channel with a 76 dBA signal to noise ratio. The signal to noise ratio at the rated power output (not CEA-2006 conditions) is 100 dB.

Product description

Many of today's power sports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. Kenwood's compact performance amplifiers are small in size so they fit even the most limited installation areas. The amplifiers also use a conformal coated main pcb (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging the product. - Rms power output 2o: 75w x 4 - perfect for boats, atv's, motorcycles, cars and more - dimensions(wxhxd): 6-1/2" x 1-3/4" x 3-7/8".

• Rms power
• 4o: 50 watts x 4
• 2o: 75 watts x 4
• Peak power: 600 watts
• Signal sensing turn-on

User questions & answers

Question:	What size wiring kit should I use or would be best to connect this to my car
Answer:	Not sure why it wouldn't unless it's being installed in a glove box. It's less than 1 square foot.
Question:	I have 4 75 rms kenwood 6 1/2 door speakers, will this amp be good to power them? the physical size of the amp looks perfect for under the dash
Answer:	@ 4 ohms it pushes 500 watts but its single channel. I'd say go for it imho
Question:	Bridged, 4 ohms: 150W x 2 chan. Is that150W on one side = 300T Or is that 150 x 2=300 Totaling 600W with both sides
Answer:	This is a mono amp and has only 1 channel.
Question:	Is this amp small enough to go under the fairing of a 2015 rodaglide
Answer:	Yes, this amp will provide 300 watts PEAK power (150 watts x 2 channels), so you might want to make sure that you keep the gain turned down a bit.Yes, this amp has 2 channels, capable of delivering 150 watts each PEAK.

Product features

Kenwood KAC-M3004 - Power your music wherever you go

Kenwood's KAC-M3004 compact 4-channel amplifier will power up the music in your vehicle with 50 watts RMS per channel. That's enough to hear everything clearly above the noise of the road, trail, or waterway as you travel along. This little powerhouse will fit almost anywhere, including a storage compartment on a boat, motorcycle, or ATV, so you can install great sound in whatever vehicle you wish. Installing a pair of subs? You can bridge this amp to 2-channel mode and send 150 watts to each subwoofer.

High-level inputs ease installation

The KAC-M3004 will accept a signal from just about any source, whether you're using RCA cables from an aftermarket receiver or speaker wires from a factory radio. When you use the speaker-level inputs, the amplifier will sense the signal and turn itself on, so you won't need to run a remote turn-on lead to your car stereo.

Compact Amplifier

The Kenwood KAC-M3004 compact Class D 4-channel amplifier is designed to boost the output and clarity of your car stereo. The amp features a conformal coating on the circuit board to protect it from moisture. This allows you to use the amp for motorcycles, marine applications, or on All-Terrain Vehicles (ATVs). The KAC-M3004 delivers 50 watts RMS x 4 channels at 4 ohms. It also gives you 75 watts RMS x 4 at 2 ohms, or 150 watts RMS x 2 channels at 4 ohms bridged.

Connections

Power/Power Control Connections: The power, ground, and power control connections are 0.35" wide screw terminals. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors or ring terminals are recommended. A minimum 10-gauge wire is required for power and ground.

Power Control: The Power Control wire should be connected to the head unit's remote turn-on lead when an aftermarket unit is used. This wire does not need to be connected if you're using speaker level inputs. The Signal-sensing Turn-on feature will turn on the amplifier when an input signal is detected.

Line-Level Inputs: The amplifier is equipped with two pairs of RCA inputs for connecting stereo RCA patch cables from the head unit to the amp. If using a factory head unit, or a unit without preamp outputs, you can splice the speaker wires to an RCA plug, maintaining the same polarity.

Product description

They provide outstanding dynamics, holding the musical reproduction to the highest standard whether delivering impactful bass or the most detailed notes. The amplifier to your system, and you'll hear all the tonal color, impact, and detail you've been missing, from the punch of the rhythm section to the shiver induced by your favorite singer's voice.



Versatile Power

The compact 500W 2-channel amp delivers 70 watts RMS per channel to your full-range speakers. This amp will bring new life to factory speakers, but you'll really notice the difference when you pair it up with new aftermarket speakers or components, or bridge it out at 4 ohms to push 170rms x 1 to a subwoofer.

• Maximum Power Output: 400W, Amplifier Type: Class AB, Signal to Noise Ratio: 95dB (Reference: Rated Power into 4Ohms at 14.4V)
• Frequency Response: 5Hz-50kHz (+0dB, -3dB), Input Impedance: 10k ohm, Speaker Impedance: 4Ω (2Ω to 8Ω allowable) Bridged connection 4Ω to 8Ω allowable
• Low Pass Filter: 80 Hz (-18 dB / oct.)

User questions & answers

Question:	I have two 12" woofers with 175watts rms and 500 watts peak. would this amp be able to push it
Answer:	I don't think so, it barely pushed one 12 in bazooka with the same specs.
Question:	is it good for 600 watts rms
Answer:	I don't know I have mine on 4 6 1/2's and 2 3 1/2's
Question:	Would this be good to power one 12" subwoofer? My old amp was a Crossfire 600W
Answer:	If the subwoofer is rated at 300 watts or less I would say yes. Generally speaking the wattage of the amp should be greater than the wattage of the speaker to sufficiently power it.
Question:	What does speaker level input & signal sensing turn on do? I see the plug on the front of the amp
Answer:	This is the Speaker Level Input adapter. This is only for people who will connect their amps to a factory system by splicing into your rear speaker wires.If you are using RCA cables to feed signal to your amplifier, you don't need it. Keep it in case you need to return or RMA the amplifier though.

Product description

They provide outstanding dynamics, holding the musical reproduction to the highest standard whether delivering impactful bass or the most detailed notes. The amplifier to your system, and you'll hear all the tonal color, impact, and detail you've been missing, from the punch of the rhythm section to the shiver induced by your favorite singer's voice.



Versatile Power

The compact 500W 2-channel amp delivers 70 watts RMS per channel to your full-range speakers. This amp will bring new life to factory speakers, but you'll really notice the difference when you pair it up with new aftermarket speakers or components, or bridge it out at 4 ohms to push 170rms x 1 to a subwoofer.

• Maximum Output Power: 500W RMS Power at 4ohms: 70W x 2ch RMS Power at 2ohms: 85W x 2ch
• Bridged at 4ohms: 170W x 1ch Frequency Response: 20Hz - 50kHz
• Low Pass Filter: 80Hz, -18dB/oct Speaker Level Input: Yes
• Signal to Noise Ratio: 100dB
• Dimensions W x D x H (mm): 230 x 167 x 56

User questions & answers

Question:	Will this power 2 6x9 car speakers at 150 watts each? Does this have 2 150 watt channels
Answer:	Step 2: Flatten the signal, open the low-pass filter. Turn your sub amp's gain to its lowest, most counter-clockwise position. ...Step 3: Adjust the subwoofer gain and low-pass filter. Play music through your receiver at about one-quarter volume. ...Step 4: Bass boost and subsonic filter.
Question:	Can this amp power 4 Kicker 6.5 inch 4ohms speakers
Answer:	Any nine to twelve volt DC power supply will power this. You can buy a 9v power block pretty cheap and cut the end off to connect it to the positive and negative terminals. be sure you do not reverse the polarity of your connection. This one can be used for other items also and the voltage is seletable. It has a two wire connector to wire your Winegard RFL 342; https://www.amazon.com/Belker-Universal-Adapter-Household-Electronics/dp/B078LSVVTB/ref=sxin_2_ac_d_rm?ac_md=0-0-ZGMgcG93ZXIgYWRhcHRlcg%3D%3D-ac_d_rm&keywords=dc+power+adapter&pd_rd_i=B078LSVVTB&pd_rd_r=84b189e7-55f0-4fd9-b5b1-604de65f6b16&pd_rd_w=Qkdx5&pd_rd_wg=QnAuo&pf_rd_p=e2f20af2-9651-42af-9a45-89425d5bae34&pf_rd_r=G237JW2PPH3MZCBXQ1HM&psc=1&qid=1574983317
Question:	will this work with 2 12 inch 300 watt peak power kicker subs? will each sub get 150 watts of power
Answer:	No, if your TV is not digital you will still need the converter.
Question:	would this amp work to power 4 6x8s for voice and mids
Answer:	My Winegaurd RFl-342 works real good on boost signal and signal strength. I have a rotor antenna and you can see the different signal strength as you rotate the antenna for best reception and location of Tv repeaters. You will have to have a 12 volt system to power it. I use a 12 volt converter to power it.