Product description

The California scents car scents can air freshener is a unique air freshener that comes neatly packaged in little cans. Pop the top and place anywhere you want a fresh scent. After 60 days, rotate the scent pads and place the canister in smaller areas in your car or out in the open. California scents keeps on working and freshening for months. California Scents Car Scents are available in a wide variety of fragrances.

• Pack of eight, each 1.5-ounce(Total of 8 X 1.5 = 12 ounces)
• Pop it under the seat or in a cup holder and ride with fresh air for months (upto 60 days)
• Organic, biodegradable and spill proof formula

User questions & answers

Question:	How many cans are in 1 order
Answer:	It depends - I use A LOT - 5 or 6 Days a week and I like to make my lashes really Long. This mascara does this perfectly. So some tubes last 3 or 4 weeks. Some longer...
Question:	Which smells best cherry or strawberry
Answer:	This product is from same brand in Japan however ingredients are modified to meet the U.S. FDA regulations.

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

Break out the Bass with the Planet Audio Anarchy AC1500.1M Monoblock Class A/B Amplifier. This powerful 2-Ohm stable Amplifier features 1500 Watts Max Power with a MOSFET power supply to drive your tunes to the limit. Customize the sound with Variable Low Pass Crossover and Bass Boost. Unleash the Bass with the Remote Subwoofer Control. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Enjoy music on your terms with the Planet Audio AC1500.1M. For more product details, please scroll down.

• power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs
• low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers
• low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will primarily keep high notes out of your subwoofer(s)
• variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it

User questions & answers

Question:	What amp will do for 3 fusion
Answer:	200 watts
Question:	I cancled my order for an amp by mistake what can we do? I still want the order
Answer:	It should do quite nicely I have it pushing 4 VM 12's an it still has power to go. Am running mine off 0ga wire cause I have noticed with out good power an ground it will heat up.
Question:	Does this one come with a bass knob
Answer:	Yes your power supply needs to b very strong, i wud suggest you get a power cap! I have this amp pushing 2 15 kicker comp right now, very powerful!!
Question:	is this amp enough to power 1 pioneer tsw307d2 at 4ohms or 1 pioneer tsw3002d4 at 2ohm? I have 1 of each subs so whatever is best
Answer:	Hello Robert, We do offer some great 15 inch speakers like the AC15D, but I would recommend the BBD12 as our best speaker. Thank you.

Product features

Control Your Sound

Make your own music rules with the Planet Audio Anarchy AC1500.1M Monoblock Class A/B Amplifier. With 1500 Watts Max Power and MOSFET power supply, this Amplifier lets you set your audio experience. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Product description

Get your Bass pumping with the Sound Storm Evolution EV2500M Monoblock Class A/B Amplifier. This powerful 2-Ohm stable Amplifier features 2500 Watts Max Power with a MOSFET power supply for solid sound. Customize the sound with Variable Low Pass Crossover and Bass Boost. Boost the Bass level with the Remote Subwoofer Control. With clean lines and simple, subtle styling, Evolution Amplifiers offer big performance and mobile audio excellence. Don’t miss a beat with the Sound Storm EV2500M. For further product details, please scroll down.

• 2500 W MAX Power @ 2 Ohm x 1 Channel
• 1250 W MAX Power @ 4 Ohm x 1 Channel
• RCA Low Level Inputs, High Level Inputs, Variable Low Pass Crossover
• Variable Bass Boost, Variable Input Gain Control, Input Sensitivity Selector
• Remote Subwoofer Control
• Dimensions: Depth 15.5” x Width 10” x Height 2.4”
• 6 Year Platinum Online Dealer Warranty

User questions & answers

Question:	Would this push 2 12inch skar zvx
Answer:	YES! It is really amazing! I bought one for making breakable heart and bought another for my friends. It is made of soft silicone. So easy to pop out! Definitely recommend!
Question:	How many watts is this putting out for a single 2 ohm sub
Answer:	yes, Used within the temperature between -40~230 centigrade. dishwasher safe.
Question:	what is the specs on this amp? how many watts at what ohm load
Answer:	I'm pretty sure it is tubular mascara. Its one of the only mascaras I can use that doesn't end up smudging down eyes. I've been buying it off Amazon for quite some time now.
Question:	this amp support gauge 4 and fuse block 150A
Answer:	I've never used Dejavu.

Product features

Mobile Sound Stability

Drive up the bass on your sound system with the the Sound Storm Evolution EV2500M Monoblock Class A/B Amplifier. With 2500 Watts Max Power and MOSFET power supply, this amplifier delivers solid bass. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. With clean lines and simple, subtle styling, Evolution Amplifiers offer big performance and mobile audio excellence.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Product description

Atrend Bbox A152-10CP Dual 10” Sealed Subwoofer Enclosure Fits 1999-2007 Chevrolet / GMC Silverado / Sierra Extended Cab

From the Manufacturer

1997 - 2007 GM Extended Cab Dual 10-Inch Down Firing Subwoofer Enclosure

• Accu-Tuned 10” Dual sealed subwoofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for lower profile sound quality subwoofers.
• 2.42 Cubic Feet Net Volume internal air space(.93 per sub) is ideal for tight accurate bass reproduction. Subwoofer Mounting Depth is 7” which is ideal for lower profile subwoofers.
• OEM-Fit is designed and engineered specifically for the 1990-2007 Chevrolet / GMC trucks to ensure an OEM fit without impeding the operation of the back seat. High-Grade MDF for Ultimate structural rigidity and no-flex construction.
• Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Premium OEM Grade Carpeting for factory look and durability.
• Dimensions Sub cut out: 9.125”, mounting depth:7”, front height: 9.25”, rear height: 6.75”, width: 51.25”, front depth: 14.75”, rear depth: 13.13

User questions & answers

Question:	What is the box volume
Answer:	1 can. Don't buy it. Just go to Autozone. This seller is trying to scam buyers out of their money.
Question:	Will kicker cvr 124 fit in this box
Answer:	Cherry but be warned I must have purchased a bad batch because they we're all dry. Needless to say I was upset.
Question:	Will it fit in my 2002 Chevy avalanche
Answer:	Yes!
Question:	Will this fit my 2 12inch comp Rs
Answer:	No, you can use one mold. It'll be half the number of holes. So the 6 hole mold will make 3 bombs.

Product features

Vehicle Specific Applications

Atrend has been an industry leader since 1996, continually extending the boundaries of customer satisfaction and striving to raise the bar at every opportunity.

We proudly introduce the Bbox line of Vehicle Specific Enclosures for a wide variety of applications.

High Quality Construction Techniques

All Bbox Vehicle Specific Enclosures are made from High Quality MDF featuring fully glued & braced assembly. Each Vehicle Specific Enclosure is designed to meet and exceed even the harshest conditions while offering superior sound and build quality.

Unsurpassed Fit and Finish

All of our Vehicle Specific Enclosures are engineered with a near perfect factory fit in mind. We strive to maintain the maximum usable space in a vehicle while delivering the best performing subwoofer enclosure. Most enclosures are available in either a Premium Carpeted or durable, Tough Guard bedliner finish.

Product description

Spark up your sound system with the Sound Storm Evolution EV2.1000 2-Channel Class A/B Full Range Amplifier. This 2-Ohm stable amplifier features 1000 Watts Max Power with a MOSFET power supply to rock the beat. Customize the sound with the Variable Low and High Pass Crossover and Bass Boost. Shift the Bass into high gear with the Remote Subwoofer Control. Bridge Channels for even more power and flexibility. With clean lines and simple, subtle styling, Evolution Amplifiers offer big performance and mobile audio excellence. Get the power and stability of the Sound Storm Evolution EV2.1000. For more product details, please scroll down.

• 550 W MAX Power @ 2 Ohm x 2 Channels
• 250 W MAX Power @ 4 Ohm x 2 Channels
• 1000 W MAX Bridged Power @ 4 Ohm x 1 Channels
• Full-Range, Class A / B Topology, MOSFET Power Supply
• Low and High Level Inputs, Variable Low Pass Crossover, Variable High Pass Crossover
• Variable Bass Boost, Variable Input Gain Control, Input Sensitivity Selector, Remote Subwoofer Control
• Dimensions: Depth 9.5” x Width 10” x Height 2.3”
• 6 Year Platinum Online Dealer Warranty

User questions & answers

Question:	Will this bad boy amp power my two sony mhc-nx1 speakers? one speaker has 100 watts and 4 ohms. i think i did that right. i need them to make sound
Answer:	Yes, it comes with a AC adapter. However, mine wasn´t perfectly working, leading to annoying noises into the amp, so I need to replace it for a generic better one. In adition, I recommed you buying individual bass effects pedals, since my experience with this one was very limited.
Question:	Can this handle two type r 12 swr-1222d
Answer:	I have- actually like to use both together- Its like having two presets The Sansamp has a much better Pre/Drive Setting- though Valeton's can be great for super dirt You can have two diff compressor settings- the SA's more subtle The Envelope and the Chorus are better on the SA, then you can have weird extreme settings on the Valeton
Question:	Could this handle tne212d 1,200-watt dual 12-inch sub enclosure
Answer:	No, This does not have an Aux out. this is made to be plugged in to an amp or a sound system, no headphone port.
Question:	which is the maximum in RMS
Answer:	Yes, a GSMini will fit in the stand.

Product features

Clean Sound

Crank out your jams with the Sound Storm Evolution EV2.1000 2-Channel Class A/B Full Range Amplifier. With 1000 Watts Max Power and MOSFET power supply, you get clean, high quality sound. This 2-Channel Amplifier can power a pair of speakers or two subwoofers @4-Ohms or two pairs of speakers or four subwoofers @2-Ohms. Customize the sound with Variable Low and High Pass Crossover, Bass Boost, and Remote Subwoofer Control. Bridge Channels for even more power and flexibility. With clean lines and simple, subtle styling, Evolution Amplifiers offer big performance and mobile audio excellence.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Bridgeable and 2 Ohm Stable

Combine the channels of a 2 or 4 channel amplifier to provide a dramatic increase in power output.

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

Variable Low Pass Filter and Variable High Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Variable high-pass filter gives you control over the frequencies that pass through to the full range speakers.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Product description

Add deep bass excitement and extended dynamic thrills to your music or movie sound system with the easy-to-connect and easy-to-use PSW 10. Its 10" Dynamic Balance composite cone driver and non-resonant enclosure produces deep, smooth response with superior detail and accuracy, while limiting distortion. The sub is powered by a high-current amplifier producing 50 Watts RMS/100 Watts dynamic power. A rotary volume control adjusts the volume of the subwoofer relative to the other speakers in the system and the unit offers a continuously variable low-pass filter, adjustable from 80-160 Hz. Easily accessible, professional-grade line- and speaker-level inputs, and speaker level outputs, allow easy connection to any system.

• POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
• LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion
• Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt rms amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
• EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
• A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete

User questions & answers

Question:	What in your opinion is the best power setting for normal use, "on" or "auto" for this unit
Answer:	I would say depends if you use the item everyday/constantly as your sound for your surround. Or if you use surround/theater occasionally. If the latter I would use `on/off` , if you use it often or primarily the auto would be the way to go in my opinion. Plus is the sub easy to get to? Auto is great if its behind furniture or out of reach,etc.
Question:	Does this speaker have a volume control? Thanks
Answer:	Just to clarify something a previous reviewer stated: "Note: If you are using a Sub out/LFE connection from your receiver turn the Low Pass all the way up. " This does not apply to receivers with which you can specify the low-pass cutover frequency. For example, my modest Onkyo receiver has cutover settings of 80/100/120 HZ for the LFE/Sub output. If you have this option, you should consult your main speaker's manual for suggested low-pass settings or simply tune them by ear. For my setup, 120 HZ was both the recommended and best-sounding cutover frequency. 160 HZ was a little muddy :)
Question:	Can this sub be added to a Vizio 2.0 sound bar, for small to medium-sized HDTV's? If not, what should I get? For TV/Games/Music
Answer:	Like John, I too have a Vizio 2.0 sound bar and this pairs very well. I have a small theater room (10 x 20) and this one 10" fills the room. This sub is the best bang for the buck you can get.
Question:	Do I need a Y-adpater? A sound tech told me one sub wire would do the trick and just plug it into the L and ignore the R. Is this true
Answer:	Initially, used a one wire connection. Sounded OK, but .... Got a "Y" connector, attached at the rear of the amp, ran L & R wires to the PSW10: sounds amazing now and very adjustable. Need to get the PSW12 to get a one wire connection. Am very satisfied with this sub and would recommend it. Used in a 12' X 20' room, front/back/center and now the sub. Tom

Product features

Single 10" Subwoofer

• PSW enclosures are designed and engineered for perfect volume, minutely tuned for distortion-free low frequencies, and internally braced and damped to eliminate internal standing waves and other performance-robbing resonances.
• This unique configuration uses a specially tuned and directed port to more efficiently produce maximum bass impact.

100 Watts

Unique design keeps your subwoofer stable and steady even at radical volume levels, for more efficient use of power. No more "escaped washing machine" syndrome.

Laser-Based Klippel Measurement Technology

Our state-of-the-art Klippel distortion analyzer optimizes the woofer's motor structure, voice coil alignment and suspension for smooth, unimpeded movement over a broad spectrum of the lower frequencies to ensure the best, most efficient performance even at extreme listening levels.

Resonance-Free Dynamic Balance Driver Materials

PSW Series subwoofers outperform the competition with durable, resonance-free Dynamic Balance driver materials that stay stiff and move fast. You experience deep, musical low frequencies and thrilling effects with superior system blending.

Easy Connection to Any System

Inputs

• Audio Inputs: Stereo Line Level - RCA, Pair (L/R) Analog RCA.
• Speaker Inputs: Pair of Spring Terminals.

Outputs:

• Audio Outputs & Speaker Outputs.
• Pair of Spring Terminals.

Unique Design Keeps Your Subwoofer Stable

Unique design keeps your subwoofer stable and steady even at radical volume levels, for more efficient use of power. No more 'escaped washing machine' syndrome.

Product description

Get your music thumping with the Planet Audio pulse PL1500. 1M Class A/B amplifier. This powerful 2-ohm stable amplifier features 1500 Watts Max power with a MOSFET power supply to pump out your playlists. Customize the sound with variable low pass Crossover and switchable bass Boost. Tweak the levels with the remote subwoofer control. When space is limited but your passion for great sound is not, pulse amplifiers with blue illuminated End panel strips and logo, are just what the doctor ordered to power up your music and get your heartbeat racing. Put your tunes in gear with the Planet Audio PL1500. 1M. For further product details, please scroll down.

• Power - 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• Specs - Dimensions: 10” x 7” x 2.4”, Weight: 4.9 lbs.

User questions & answers

Question:	Will this fit a 1999 ford ranger
Answer:	This amplifier doesn't have the power for these type of subwoofers. You run the risk of th e amp over heating or going into protect mode
Question:	Will this amp push 2 15inch kicker cvrs 2ohm subs
Answer:	hi its fred this amplifer is great but at 2 ohms it put max 1000 watts rms max max.
Question:	Will this power an kenwood kfc-w3016ps 12-inch 2000-watt subwoofer
Answer:	Evolution Series Single-Channel Class D Car AmplifierRMS Power Rating:4 ohms: 1600 watts x 1 chan.Max power output:2 ohms: 3000 watts x 1 chan.1 ohm: 4000 watts x 1 chan.This is the specs of tgis amp but I dont believe they are this amp sucks a lot it blow up on me
Question:	What size fuse comes on the amp
Answer:	I don't know the gauge wire but it's what you find in most amp kits , I have mine pushing a set of 15 in. Kickers also a set of 12 in. Pr3 it pushes them easily .

Product features

Style and Sound

Feel the beat with the Planet Audio Pulse PL1500.1M Class A/B Monoblock Amplifier. With 1500 Watts Max Power and MOSFET power supply, this Amplifier gets your music in gear.

Customize the sound with Variable Low Pass Crossover, Switchable Bass Boost and Remote Subwoofer Control.

When space is limited but your passion for great sound is not, Pulse Amplifiers with blue illuminated end panel strips and logo, are just what the doctor ordered to power up your music and get your heartbeat racing.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Product description

Lanzar Model : VCT2010

800 WATTS 2 Channel High Power MOSFET Amplifier

400W x 2 Output at 4 Ohms

800W x 1 Bridged Output at 2 Ohms

2 Ohm Stable

MOSFET Power Supply

Variable Hi-Pass : 40 Hz-250 Hz

Variable Low-Pass : 40 Hz-250 Hz

Variable Input Level (Gain) Control : 6V-200mV

Bass Boost Switch:0-18dB

Thermal / Overload / Short Circuit Protection

Soft Turn On/Off

Power & Protection LED Indicator

Low Level RCA Input : 10K Ohms

Line Level RCA Output

Frequency Response : 15 Hz-30K Hz

Signal to Noise Ratio: >95dB

THD:0.1 %

2x20 Amp Maxi Type Fuse

Slim Size Amplifier Design For Easy Installation

Dimensions: 10.63''W x 1.78''H x 7.48''L

The Lanzar 800 WATTS 2 Channel MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service. VECTOR series amplifiers are designed with the latest technology available, which provides headroom for even the most demanding peaks and dynamic ranges found on modern CDs and recordings.

• 400W RMS / 800W MAX POWER: The Lanzar 800 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 400W x 2 output at 4 ohms or 800W x 1 bridged output at 2 ohms for a high quality audio
• FULL RANGE CROSSOVERS: This product features a low / high pass variable crossover for versatility and precise control by being able to fine tune your music. The speaker / subwoofer terminals are to guarantee high conductivity and minimum signal loss
• MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
• SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2x30 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
• SLIM SIZE DESIGN: Measuring only 10.63''W x 1.78''H x 7.48''L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation

User questions & answers

Question:	will this amplifier push my 1000 watt Kenwood
Answer:	Not sure what you mean. I had 2 10 p3s 2000 watt amp. Box handled great
Question:	Will this amplifier power   2) kicker 10c124 12" 600w 4omh
Answer:	Hello and thank you for the question The kicker CVR 124 has a morning death of 5 3/4 inches The a152-12CP comes with a mommy depth of 7 1/4 inches so it should fit without any issues Please let me know if we need to help you any further and thanks again
Question:	What's the rms watts per chanel at 2 ohms
Answer:	It fits my 2002 2500
Question:	What this class amplifier (AB, B, C, D
Answer:	They sure should

Product description

The Skar Audio VXF series was designed to be the ultimate sq/SPL subwoofer. It was engineered specifically to feature a super low "Fs" To hit the low notes that SPL requires, while still showing versatility sounding great across other notes in the low end sound spectrum. The extra focus on increasing the coil ventilation across this line, is just one of the differentiation's that put this woofer in a class of it's own. The VXF series features a 3" High temperature copper voice coil. Under the stitched high roll foam surround, you will find a 4-layer spider with stitched leads. A massive 300 oz ferrite motor allows for extreme power handling for extended periods of time. This woofer boasts a max power rating of 3, 000 watts, and a conservative RMS rating of 1, 500 watts. Dual 2 ohm voice coil configuration, sensitivity (SPL): 89.8 dB, Fs: 31.4 Hz. Subwoofer Mounting Depth: 9.88".

• 15-Inch Dual 2 ohm sq/SPL Car Subwoofer
• Peak Power: 3, 000 Watts | RMS Power: 1, 500 Watts
• 3" High temperature Copper voice Coil | Sensitivity (SPL): 89.7 dB
• Extremely powerful 300 oz ferrite motor | Fs: 31.4 Hz
• Competition Grade Paper Cone with stitched high Roll Foam Surround
• Frequency response: 20 Hz - 250 Hz

User questions & answers

Question:	Will my hifonics 2000 watt amp push one of these
Answer:	If it's 2000rms.
Question:	Will a regular ported box work with this sub
Answer:	Yes.
Question:	What amp Can power two of these
Answer:	You ran run pretty much any amp to be honest. Anything over 2k will work pretty good. A true 1000 watts a peice will push these good.
Question:	What size Amplifier should I put on two of these subwoofer
Answer:	Anything that does true 6k or more

Product features

Technical Specifications

• Dual 2 Ohm Voice Coil Configuration
• Peak Power: 3000 Watts
• RMS Power: 1500 Watts
• Competition Grade Pressed Paper Cone
• Stitched High Roll Foam Surround
• 3" High Temperature Copper Voice Coil
• Frequency Response: 20 Hz - 250 Hz
• Sensitivity: 89.7 dB
• Fs: 31.4 Hz
• Xmax: 30 mm

• Class A/B full-range channels
• Class D bass channel included for one amp to run an entire system
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ 6dB variable bass boost for those additional low frequencies

User questions & answers

Question:	so can i run 2 front door speakers and 2 12 inch 4 ohm subs with this amp
Answer:	Ye
Question:	Can i push 2 6.5’s 2 tweeters and 2 6x9’s
Answer:	shouldn't be a problem.. I'm using that to power my 1800 watt 12 inch Alpine type R
Question:	Am I able to run the speakers at 4 ohms and the subwoofer at 2ohms
Answer:	Go on your rms wattage. kfc-w3016ps are 50-400 watts rms each this amp should be enough for 2 of those kenwood's
Question:	Does this work with the Kicker remote sub controller
Answer:	30

Product features

CX Amplifiers

CX-Series Amplifiers are the perfect combination of big power, bigger flexibility, and true reliability!

Control It

A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love.

One Ohm Stable

Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!

Towers of Power

CX-Series amps include vertical and horizontal mounting hardware, so you can show off your install style!

Incredible Sound Everywhere

KICKER’s CX-Series amplifier technology provides clean, powerful music in nearly any vehicle on the road today, without changing your radio or adding a line-out converter. These powerful amps work with as little as nine volts of power from your battery and as much as 40 volts (400 watts) of speaker-level input signal. With KICKER’s FIT+ (Fail-safe Integration Technology-PLUS), you get outstanding noise rejection - even with premium factory audio systems.