13 best boss audio ground loop isolators

Product description

BOSS Audio B25N Ground Loop Isolator Noise Filter, Reduces High Pitched Whine Alternator Noise caused by the car's electrical system, Always Use High Quality RCA Cables for your Audio System.Dimensions: 3.4 x 1.5 x 1.5, Unit Weight: .30 Lbs. Tips: Ground each amplifier independently. Same thing if you have added stiffening capacitors, go to a separate ground for the cap. Tips: Make sure that the amplifiers have a good ground first. Use at least 10 Gauge wires for the grounds (and power). If you have 2 or more amplifiers, DO NOT go from the ground terminal of one amp to the other and then from there to ground.

• Reduces High Pitched Whine Alternator Noise caused by the car's electrical system
• Ground Loop Isolator Noise Filter
• Always Use High Quality RCA Cables for your Audio System
• Dimensions: 3.4 x 1.5 x 1.5, Unit Weight: .30 Lbs. Tips: Ground each amplifier independently. Same thing if you have added stiffening capacitors, go to a separate ground for the cap

Product description

2-Channel Ground Loop Isolator Filter Blocks Ground Loops Within An Audio System Connection Type: RCA Reduces Background Noise Without Impairing Sound Quality

• 2-Channel Ground Loop Isolator Filter
• Blocks Ground Loops Within An Audio System
• Connection Type: RCA
• Reduces Background Noise Without Impairing Sound Quality

Product description

2-Channel Ground Loop Isolator Filter Blocks Ground Loops Within An Audio System Connection Type: RCA Reduces Background Noise Without Impairing Sound Quality

Product description

The Boss B25N RCA ground loop isolator/noise filter is designed to eliminate ground loop noise within an audio system from 2 RCA line-level audio channels. This ground loop isolator will help reduce noise that can come when you hook up an aftermarket car audio head unit or CD player. This isolator will completely eliminate noise that happens due to ground loops and can be a real lifesaver for anyone who is currently experiencing this issue.

• Boss B25N ground loop isolator noise filter with 2 channels
• Reduces high pitched whine alternator noise caused by the car's electrical system
• Input sensitivity adjustment
• Blocks ground loops within an audio system
• Always use high-quality RCA cables for your audio system

Product description

Full power and control means adding the right processor to your system. The 7-band graphic equalizer with selectable main and auxiliary inputs, subwoofer-level controls, line-level outputs, and 6-channel/7-volt RCAs is by far the best processor. The 5-band version and a 2/3 way, mobile, audio electronic crossover with remote control capable of managing the most complex amplifiers and systems.

• The DS18 XM3 is a 3-Way Active Crossover w/ x20 Frequency Multiplier Switch
• Remote Sub-level Control 0-180 Degree Subwoofer Phase Switch Butterworth 12dB/octave Slopes Detente Frequency Selection Controls Gold RCA Input and Output Connectors
• Power, Ground and Remote Connector PWM Power Supply LED Power Indicator Bass Boost

User questions & answers

Question:	Will this work to fix bass rolloff from a factory radio
Answer:	I haven't had any trouble playing a variety of CDs, including ones I have ripped from mp3s and I believe those are in CDR format.
Question:	Is this eq or any ds18 eq have bt
Answer:	No, it will only connect as output to a blue tooth device. You can play music wirelessly from your phone through the unit, for instance, but you cannot connect the device itself to external blue tooth speakers. It does have a headphone and rca out connections, though.
Question:	Is this a line out converter
Answer:	This product has a cassette player. Pictured on the right side of the product.
Question:	Y does this have a yellow colored plug
Answer:	For audio books, music instrument practice pieces, to name a few specifically, and other linear arrangements I can see the usefulness of such a feature and have wondered the same myself.

Product description

Power up your music on the trails with the Boss Audio Riot R1004 4 Channel Class A/B Amplifier. This 2-Ohm stable Amplifier features 400 Watts Max Power with a MOSFET power supply to get your music in gear. Amplifiers in the Riot Series are perfect for first time car audio buyers looking for enhanced sound and performance for their system at an affordable price. Get better sound with the Boss Audio R1004. For further product details, please scroll down.

• Power - 100 Watts Max x 4 @2-Ohms, 50 Watts Max x 4 @4-Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Specs - Dimensions: 7.8” x 9” x 2”, Weight: 3.1 lbs.
• Warranty - BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	will this amp power 2 6x9 500 watt door speakers and 2 rear pillar speakers
Answer:	It will with ok sound quality if it's for inside the car listening pleasures. However getting another one and bridging it or a higher powered amp for a good baseline would be recommended.
Question:	Can you support two 10" subs with this one amp
Answer:	Hello. Yes, this amplifier will support two subwoofers. You will need to make sure that each subwoofer does not exceed 400 watts peak power.
Question:	Can you hook 4 speakers and a sub to this amp? Or just 4 speakers and I'd need a separate one for the sub? Thanks in advance
Answer:	Hello. I would recommend purchasing a monoblock amplifier to power your subwoofer. The R4004 is a 4 channel amplifier that would work better for your speakers.
Question:	whats rhe size of the amplifier
Answer:	Dimensions of the R4002 are 10.79" x 10.43" x 2.25".
Question:	Can I run a chuchero and a subwoofer
Answer:	Yes
Question:	Can I run 2 midrange speakers and a subwoofer
Answer:	….if the amp actually worked, yes. Sadly mine did not, nor did the replacement.
Question:	Bluetooth version? AptX features
Answer:	BT1.2 if I remember... NFI about AptX. In any event, it's really a crap item. Some Chinese company bought the Lanzar name; it's not the quality it was. At all.
Question:	Is it monoblock? Class d? Class a? class a/b? Class b
Answer:	Hi, it is a class D amplifier. Thank you.

Product features

Clear Sound

Get clear sound on the trails with the Boss Audio R1004 4 Channel Class A/B Amplifier. With 400 Watts Max Power and MOSFET power supply, this 2-Ohm Amplifier gives your music a boost. Amplifiers in the Riot Series are perfect for first time car audio buyers looking for enhanced sound and performance for their system at an affordable price.

Mosfet and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

Kick your Bass into high gear with the Boss Audio Armor AR3000D Class D Monoblock Amplifier. This powerful 1-Ohm stable amplifier features 3000 Watts Max Power with a MOSFET power supply to get your tunes rocking. Customize the sound with Variable Low Pass Crossover, Bass Boost and Subsonic Filter. Maximize the Bass with the Remote Subwoofer Control. For double the performance and power, strap on another AR3000D for a total power of 6,000 Watts @2-Ohms. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience. Give power to your playlists with the Boss Audio AR3000D. For further product details, please scroll down.

• Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms, 6000 Watts Max Bridged x 1 @2-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• Strapping Capable - You are able to strap two AR3000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Specs - Dimensions: 12.31” x 6.50” x 2.80”, Weight: 6.86
• Warranty - BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	Will these amp power these subs? https://www.amazon.com/dp/b014oykx2w/ref=olp_product_details?_encoding=utf8&me
Answer:	Yes and yes
Question:	Will this amp push 4 Elux 15 vm audio
Answer:	each 12" 4 ohm sub would only get 75 watts of power, not a good turnstile for your system
Question:	how can i hook up a 0 gauge wire to this
Answer:	Thank you for your question. The crossover setting cannot be turned off and only goes up to 250 hz. Happy to help!
Question:	Quiero saber si este amp me funciona bien para un parlante kicker l7 de 15 pulgadas
Answer:	Thank you for your question. 150 RMS @ 4 ohms, 300 RMS @ 2 ohms. Happy to help! - Creative Audio

Product features

Performance Power

Ramp up your vehicle's Bass with the Boss Audio Armor AR3000D Class D Monoblock Amplifier. With 3000 Watts Max Power and MOSFET power supply, this Amplifier packs an audio punch. Customize the sound with Variable Low Pass Crossover, Bass Boost, Subsonic Filter and Remote Subwoofer Control. Strap this Amplifier to another AR3000D for double the performance. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience.

Class D and MOSFET

Class-D amps run more efficiently and generate more power using a more compact design.

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Strapping Capability and 1 Ohm Stable

Strap two amplifiers together to get double the power at an impedance of 2-Ohms.

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter and Subsonic Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Low Level Inputs and Variable Input Control

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Phase Control

Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up 'out of phase'.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Product description

Shift your music into gear with the Boss Audio Phantom PF2200 4-Channel Class A/B Full Range Amplifier. This powerful 2-Ohm stable amplifier features 2200 Watts Max Power with a MOSFET power supply for better performance to get your vehicle rocking. Customize the sound with Low and High Pass Crossover, Bass Boost and Remote Subwoofer Control. Bridge channels for more power and flexibility. The Phantom Series are full-featured amplifiers that offer eye-catching Multi LED Backlit Illumination and customization for high quality sound and performance. Rock out with the Boss Audio PF2200. For more product details, please scroll down.

• 550 W MAX Power @ 2 Ohm x 4 Channels
• 275 W MAX Power @ 4 Ohm x 4 Channels
• 1100 W MAX Bridged Power @ 4 Ohm x 2 Channels
• Full-Range, Class A / B Topology, MOSFET Power Supply
• Low and High Level Inputs, Variable Filter, Variable Bass Boost
• Remote Subwoofer Control, Red LED Backlit Illumination
• Dimensions: Depth 15.5” x Width 10.3” x Height 2.3”
• 6 Year Platinum Online Dealer Warranty

User questions & answers

Question:	This is for subwoofer or speaker
Answer:	This is for both speakers and a subwoofer.
Question:	Would this be able to handle alpine sxe-1750s 6.5" 560 watt 2 way car component speakers (2 pairs) 45 watt rms (90 watt per pair
Answer:	Yes
Question:	can i use this amp with two 12" kicker subs
Answer:	Yes you can. Although I would not recommend it. I would use a 2 channel amp.
Question:	Can this power my boss pc65.2c component speaker that produces 500 watts rms at 250 each and a alpine sws-12d4 sub at 500w rms? any recommendations
Answer:	I believe in the description is states it is 3200 watts so yes it should handle your speakers.

Product description

BOSS Audio Systems Elite BE4000D Class D Car Amplifier - 4000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers, Remote Subwoofer Control

• Power - 4000 Watts Max x 1 @1-Ohm, 2000 Watts Max x 1 @2-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• Strapping Capable - You are able to strap TWO BE4000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

User questions & answers

Question:	Will this work with nvx true spec 1/0 gauge complete dual amp 100% copper wiring kit [xapk1d]
Answer:	Yes it will. Shouldn't need a reducer at all.
Question:	Will this work with 0 gauge wires
Answer:	Yes and no, you will need a crimped connector so it will fit
Question:	What are the rms ratings? i plan on strapping 2 amps on a 10" 5000 watts rockville punisher
Answer:	Ok so it claims like 3,000 watts, no. Raw , pure watts, I would say about 1,200 watts. The amount of watts you are seeking, you may want to go with a solid amplifier from a great company like Skar or Rockford. More expensive, I know, but you need performance.
Question:	How many channels does it have
Answer:	It has a single channel. it is a Monoblock unit.

Product features

Class D

Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Strapping Capability

Strap two amplifiers together to get double the power at an impedance of 2-Ohms.

1 Ohm Stable

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic Filter

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Phase Control

Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up 'out of phase'.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Low Level Inputs

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Product description

Feel more Bass with the Boss Audio Riot R3400D Class D Monoblock Amplifier. This powerful 1-Ohm stable amplifier features 3400 Watts Max Power with a MOSFET power supply to get the most out of your audio experience. Customize the sound with Variable Low Pass Crossover, Bass Boost and Subsonic Filter. Bump up the Bass and feel the beat with the Remote Subwoofer Control. For double the performance and power, strap on another R3400D for a total power of 6,800 Watts @2-Ohms. Amplifers in the Riot Series are perfect for first time car audio buyers looking to add Bass and enhanced sound and performance to their system at an affordable price. Take your sound experience to the next level with the Boss Audio R3400D.



For further product details, please scroll down.

• Power - 3400 Watts Max x 1 @1-Ohm, 1700 Watts Max x 1 @2-Ohms, 850 Watts Max x 1 @4-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Strapping Capable - You are able to strap two R3400D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

User questions & answers

Question:	What realy is the rms power rating for this amp
Answer:	Hello, the RMS for the R3400D is 2,404.
Question:	Are the three fuses 50s
Answer:	There are three 40 amp fuses for a total of 120 amperes.
Question:	does it have a cooling fan
Answer:	No
Question:	Will this amplifier push 2 12in orions xtr 2400 watt Max
Answer:	with ease

Product features

Class D and MOSFET

Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps.

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Strapping Capability and 1 Ohm Stable

Strap two amplifiers together to get double the power at an impedance of 2-Ohms.

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter and Subsonic Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Low Level Inputs and Variable Input Control

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Phase Control and Switchable Input Sensitivity

Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up 'out of phase'.

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Illuminated BOSS Logo

The BOSS Logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

• AUDIBLE WARNING TONE FOR REVERSE POLARITY: Warning tones for the following detected conditions: over-voltage limit and low battery voltage A capacitor will keep the power going to the amplifier consistent and stabilized, with a better sounding system
• VOLTAGE MEASUREMENT: Voltage Overload / Low Battery Voltage Automatic sleep status when the volume is low or there is no voltage variation present. The amplifier requires a constant amount of steady power to function efficiently and power the speaker
• BRIGHT BLUE LED VOLTAGE METER: It has a digital LED readout which indicates the unit’s unique working voltage to the decimal point. It comes outfitted with sturdy bolt-down fashion platinum plated terminal w/c makes certain a secure and stable network
• WORKING VOLTAGE SUFFICIENCY: preserves the energy going to the amplifier and stabilized, has the capability of a better sounding system. The amplifier requires a constant quantity of normal electricity to function efficiently and energize the speaker
• POWER CAPACITOR: Elegant outlook of this capacitor makes it the excellent inclusion for the vehicle indoors with excessive superb built. Easy to mount and lightweight. Automatic Sleep Status When Volume Is Low Or There Is No Voltage Variation Present

User questions & answers

Question:	New to this things can u use one big one to power three amps 1000 watt each amp tops or do I need to by three of these and what size
Answer:	The reflectors are flat and measure 5 3/4” long and 1 7/8” wide.
Question:	Does this model flash to the beat
Answer:	4 3/4 inches from center to center of mounting holes.
Question:	Does this come with a distribution block and can it power a 4500w amp
Answer:	you would have to drill anchors in the concrete for screws. They have screw holes.
Question:	what all comes with it
Answer:	I bought one of each. They are virtually identical. One has USDOT Recognition. One doesn't.

Product description

The **Boss B15N** 12 amp automotive noise filter features color coded wires for easy installation. This piece is perfect for your car, truck, boat or SUV! The noise filter is used to eliminate noise generated by the alternator and charging system. This Noise filter is 180 watts and spots to connect your output input and ground easily to it. Get rid of that whining or clicking sound fromengine noise with this Boss B15N noise suppression filter system. This will work perfect for you if you are hearing pitch vary with Engine speed. Be sure to install this, and also check all ground connections to get the most pure sound! 12 Amp 180 Watt Color Coded Wires for Easy Installation

• New Boss B15N 12 Amp Automotive Noise Filter (Pair)
• 12 Amp
• 180 Watt
• Eliminates Noise Generated by the Alternator and Charging System
• Color Coded Wires for Easy Installation

User questions & answers

Question:	Where do i install this
Answer:	Your head unit probably has two power wires, one is constant voltage, even with the ignition off you should still have 12v, second you should have switched ignition wire, only has power when ignition or acc is is on, you will need to have them both on filters, hence the twin pack, connect the red wire to the incoming power side, the blue to you power wire going to the head unit ( basically splicing this in between them ) and black to a good body ground.
Question:	I know the red wire gets power and the black wire gets ground but where does the blue wire go exactly
Answer:	Maybe the quality is bad on previous answer because it is hooked up wrong. My understanding is that the blue wire goes to your rado and the red goes to the power source. The black wire is a safety ground. Tell me if I'm wrong.
Question:	Will these two amplifiers boost the boss 616 uab 50 watt to speaker (car radio) to 180 watt to speakers
Answer:	this a 12volt noise filter it will not boost power to your amp . u can not put these in line with your speakers. u put this before your radio or amp on the 12 volt power lines
Question:	This connects to the amplifier or the stereo
Answer:	Download the user manual for the B15N here: https://www.bossaudio.com/product/car-wiring-components-system-accessory-boss-audio-b15n/ The B15N Installs between your battery and stereo. If you want one that installs between your stereo RCA outs and your amp RCA inputs, you need the Boss B25N.