13 best mounts for ez

Product description

Fight the Fish, Not the Trolling Motor with ProControll EZ Mount!

Get ready for your next fishing adventure with the Procontroll EZ Mount and use it to add an additional method of propulsion to your watercraft. Trolling motors are an effective tool for anglers because they're usually quieter than other propulsion methods, so it’s less likely to disturb water and fish. This trolling motor mount accepts almost any transom-mount trolling motor, making it suitable for different tasks. Mounting it to a boat's side or bow is easy and it can be installed in just minutes.

It may look and work like a regular transom mount U-bracket that overlaps a bow or gunnel edge and is then secured in place by screw clamps. But what makes it different is its versatility, and that it can go on any contour, thanks to its adjustable underside exterior bracket.

It’s made from rustproof, virtually indestructible, fiberglass-reinforced nylon, giving it strength and durability in harsh marine environments. This trolling motor mount adjusts to most any boat contour quickly, is easy to install, and no tools are needed. Match this item with other boat accessories to enhance your angling experience.

Fish the EZ Mount into your shopping cart now!

• QUICK & EASY INSTALLATION ON 3" WIDE OR LESS GUNNEL: The ProControll EZ Mount allows you to connect your transom mount tolling motor on the bow of your jon or utility boat. It’s so simple and quick to install, you’ll be trolling in minutes!
• PREMIUM FEATURES: EZ Mount has a quick release clamp, 1% draft on mount so trolling motor won’t slide, large ergonomic knobs for ease of mounting, and fiberglass reinforced nylon along with stainless steel hardware for strength and long-lasting durability.
• VERSATILE & ADJUSTABLE: The transom mount U-bracket overlaps a 3" or less bow or gunnel edge, and its adjustable underside exterior bracket can be attached against any contour. Lower bracket is secured on the boat’s outside & screw clamps tightened on the inside.
• BUILT TO LAST: The ProControll EZ Mount system is designed to outlast the trolling motor! All metal parts are made of hardened stainless steel or are zinc plated. External parts are made of rust-proof, indestructible fiberglass reinforced nylon.
• UNIVERSAL MOUNT: The EZ Mount Model# RMIEZ010 is the only universal trolling motor mount that accepts any transom-mount trolling motor. It measures 9.5” L x 6.75” W x 9” H and weighs 6 lbs. It works with 1” to 3” wide top rail.

User questions & answers

Question:	Will it fit on side of tracker 175 tf
Answer:	I would measure your gunnel depth and contact manufacturer with that dimension to be certain. The mount is well made and works great for side slabbing crappie. 😎
Question:	How does this mount exactly. I want to mount a trolling motor to the back of my i/o 19' boat. Does it bolt on top, verticle flat on the wall
Answer:	Dear Customer,This trolling motor mount mounts to the boat's side or bow, making it easy to install and use. Mounting in minutes, this Procontroll EZ Mount adjusts to virtually any boat contour quickly and easily. Hope it was helpfulSincerely,Customer Support TeamWillTex Group
Question:	Are there any pictures of it on other boats other than a jon? I have an eight one alumacraft v hull. I'm sure it would fit. It sounds like it will
Answer:	Sorry I do not have any, but it will fit up to a three inch wide top rail.
Question:	will this go on a kayak
Answer:	Short answer : I don't know but think it is possible. I put it on a 14' Lowe Jon Boat. It had a curved bow not allowing a normal trolling motor mount. The Procontroll worked great. I have kayaks and will eventually try it out. I would now but it is in FL and I'm in IN. I Think it might work if you have sides on your Kayak that allows it. May need to use a board to help brace.

Product description

The EZ Mag Mount windshield mount is one of the best ESCORT detector mount offerings. The EZ Mag Mount grasps the powerful magnetic anchor plate on compatible detectors, utilizing the tried-and-true StickyCup silicon suction cup to adhere to the windshield. This combination gives you the most secure and reliable connection between your detector and windshield possible.

• ESCORT RADAR QUALITY - The EZ Mag Windshield Mount gives you a sleek and reliable option for your Escort Radar to be mounted in your vehicle
• SECURELY MOUNTED - The EZ Mag Mount grasps the powerful magnetic anchor plate on compatible detectors, utilizing the tried-and-true StickyCup silicon suction cup to adhere to the windshield
• EASY RELEASE - This combination gives you the most secure and reliable connection between your detector and windshield possible while still making it simple to release and stow your radar when parked
• ESCORT COMPATIBLE – EZ Mag Mount is compatible with these Models ONLY, Escort IX, Escort IXc, Max 360c, and Redline EX

User questions & answers

Question:	Can you remove just the magnet
Answer:	You would remove the magnet if you have or want to use the BlendMount because it does not come with the magnet, at least mine didn't. That may have changed so it's worth checking. You have to remove the magnet from this and attach it to the BlendMount.
Question:	Is there a permanent mount for the escort redline ex
Answer:	We, the manufacturer of RedLine EX, do not offer a permanent mount for it. We offer detection systems that install into your car. I have heard good things about BlendMount rear view mirror mounts.
Question:	Can u move the mount from the car to another car
Answer:	Yes, the mount is very easy to take off & move to another car. This is a great mount & the magnetic connection means the radar detector can be taken down or put up in a matter of seconds & is always in the same position.
Question:	Will This work with the escort ix long range
Answer:	Yeap ... it’ll work.

Product features

EZ Mag Mount

The EZ Mag Mount windshield mount is the easiest to use and most effective windshield mount ever made. Simply tilt the display end of the detector up and slide it onto the mounting bracket. The magnetic mount holds the detector firmly in place. To remove the detector, simply lift the display end of the detector up and the detector releases from the mount.

Product description

With the new Wireless One EZ Mount compressor and manifold unit from Air Lift, installing an onboard air compressor system has never been easier. This system, which features the new and improved Wireless ONE system, packages the components of the compressor system into one easy-to-install package. The manifold and air compressor are pre-assembled at the factory in a black, powder-coated steel mounting plate. This plate helps to protect the vehicle by requiring no frame drilling. The system easily attaches to the vehicle frame rail through the use of a removable U-bolt, making the entire on-board air compressor system a no-drill application. Without EZ Mount, the manifold and compressor must be mounted to the frame of the vehicle individually and then routed together. This process leaves room for error and frustration. By securing the components together, Air Lift is able to factory-test and ensure that they system will be free from leaks, as well as provide a much simpler installation process. Buying a compressor system with EZ Mount helps to greatly reduces installation time by up to one hour and comes with a fully illustrated and easy to understand installation manual. Backed by Air Lift's industry-exclusive two-year limited and 60-day, no-questions-asked, money-back , it's a system you know you can trust. As the leader in air suspension products for more than 65 years, Air Lift is committed to delivering quality load support parts that last. Take your load support solution to the next level today with EZ Mount!

• Compact, wireless handheld controller with LCD display, programmable with up to three user-defined presets
• Reduces installation time by up to 1 hour
• Free IOS and Android mobile app easily connects with the Bluetooth-enabled manifold
• Easy installation, installs direct to battery in around 1 hour
• Manifold and controller software updates provided over the Air via free mobile app
• Fit type: Universal Fit

User questions & answers

Question:	What are the important differences between the Air Lift 25870 and
Answer:	Pumps Standard duty vs heavy duty. Both I have installed the 25870 on a 2014 2500 Denali HD has worked flawless now for the year its been on. and Got the 72000 on a 2008 Tundra that has been on since 2010. The hand held control is a little different as well but do the same.
Question:	Does this come with a mounting bracket? If soo approximately how long is it
Answer:	Yes it comes with a mounting bracket. Not sure on size off hand but contact air ride mfg they are very helpful
Question:	Can the compressor be mounted in the back of a truck, exposed to the elements? -- Is it water tight
Answer:	It's not water tight. In fact it has Air vents. It's not designed to be exposed to the elements like that. Being a plastic shell, you know how plastic gets sitting it the hot sun for days on end, it becomes brittle. Also taking up space in the back of the truck is not very smart. I've mounted a number of these things, and generally I can mount them on the outside of the frame rail Up as high as I can. This will keep most of the garbage off of it and be out of site. It's also better then trying to mount it under the hood where you have a lot of heat. That's also not good for these things. Just check behind the frame rail for any brake lines and fuel lines. I normally mount them on the passenger side behind the passenger compartment. Generally not anything behind the frame rail on that side to worry about. It's also a little quieter that far away from the Driver.
Question:	Can I upgrade the compressor if I have to? Can I add air tank to the system if it doesn't come with one
Answer:	If you add the wireless manifold to a system with a tank, you will need to add a 12 volt selenoid/valve in between the tank and the wireless unit. Hook it up to the compressor out power. I would also add a regulator to keep the pressure around 115 psi.

Product features

Wireless Control for the Masses

WirelessOne puts the power in your hands – literally. Whether it’s with the easy-to-read handheld controller or the free mobile app, you can inflate or deflate your air spring system with one touch.

Equal Pressure for Equal Loads

WirelessOne is a single-path system, meaning both air springs will be inflated or deflated to the same pressure. This is ideal for vehicles carrying loads that are equally distributed left-to-right. The controller and app are both programmable with user-defined presets, so WirelessOne can remember your frequently used pressures.

Easy Install Even Easier with EZ Mount™

The redesigned WirelessOne system is easier to install than ever. There’s no running air line inside the cab or fiddling with fuses, just a simple battery hook-up. With common mechanics tools, the system installs in only a few hours. Purchasing the WirelessOne system with EZ Mount gives you everything you need for the fastest, easiest installation possible. EZ Mount packages the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket, giving you everything you need to have full control of your air springs in no time at all.

FREE Mobile App

The FREE WirelessOne Mobile app duplicates the functionality of the remote and can be used with multiple WirelessOne manifolds. Available for both iOS and Android devices.

Product description

Our mount has the strong magnetic dock connection that inserts into the radar detector, just like the one you received with your radar detector. Our mount has an extra large suction cup that's vacuum attached to your windshield.



Our Mount is compatible with all Radar Models that use the EZ MAGnetic connection: from Escort and Beltronics radar detectors, including Escort Max360c, Max360 from year 2020 and beyond , Escort iX IXc, Redline EX (not compatible with the older Max360), Beltronics GT-360 &Cobra DualPro 360



Please note this mount is not compatible with radar connection that use the slide in metal plate connection

• Brand New in ChargerCity NO FUZZ NO MESS Packaging
• Enhanced Suction Mount Base that is strong on the windshield but easy to remove
• The mount has the magnetic dock cradle that attach into the radar detector's EZ MAG dock port (Compatible with Escort MAX360c / Escort IX IXc / Redline EX / Beltronics GT360/GT360c )
• One Year Manufacture Direct Replacement Warranty

Product description

The Glow EZ Lock 36" OCTA QUICK SOFTBOX sports a dynamic eight-sided deep parabolic shape featuring flattering, soft and luxurious color lighting with all the significant advantages of the softbox/umbrella quality with an unbeatable safe and sure EZ positive and lock system. No more clumsy construction fumbling of flex resistant rods, or frustration for careful alignment of speedring holes. The 8-ribbed softbox opens up and closes down, 'umbrella style.' The self-catch EZ Lock surrounds a thick center shaft, providing a comfortable place for your fingers to push-lock the mechanism open, and a generously sized release to close the softbox painlessly. The quick-to-setup umbrella-like assembly has all the advantages of a metallic magnum style reflector without the delicate nature. This collapsible unit was borne for the road or studio, with sturdy aluminum support rods for structural stability and extraordinary fabric strength. 

Features 

• Quick and easy EZ Lock system for safe and sure setup
• Fast. Slick mechanism glides smoothly along the shaft.
• Easy. No hassles in opening and closing.
• Locks. EZ Lock is a breeze to use and unlocks without a struggle.
• Diffused lighting. The best balance of soft and power in umbrella design.
• Larger effective light source. Covers the subject with an even light fall.
• Perfect for subjects from head and shoulders to small groups
• Excellent for subjects from head and shoulders to small groups, interiors, and environmental lighting.
• Super-efficient mirror-symmetrical parabola design
• Great for travel, location, and studio
• The EZ Lock system adds practical advantages, strength, and speed to the daunting task of quality light modification on the run and in the studio. With much attention to minutia in its sturdy build, from resilient form-fitting fabric to flexible aluminum frame ribs, this GLOW EZ LOCK 36" OCTA QUICK SOFTBOX sets the standard for portable light control for people and subjects.
• As with all fine Glow products , this OCTA QUICK SOFTBOX comes packaged in a fitted, durable fabric pouch, which protects it during transport and storage.
• ITEM INCLUDES: Glow EZ Lock 36" Octa Quick Softbox, External Diffuser, Internal Diffuser, Eggcrate Grid, Bowens Mount Speedring Adapter, Reversible Deflector Disk, Storage Bag, Glow 1-Year USA Warranty
• With the included Eggcrate Grid, you gain more control of a light source's beam by covering the front of the softbox with the grid, virtually eliminating spill. The 30° grid feathers the light creating an attractive shadow, separating the subject and the background.
• Quick and easy EZ Lock system for safe and sure setup Fast. Slick mechanism glides smoothly along the shaft. Easy. No hassles in opening and closing. Locks. EZ Lock is a breeze to use and unlocks without a struggle.

User questions & answers

Question:	Where can I purchase thus grid
Answer:	If you are buying this softbox? It comes with the grid. Otherwise you can check Adorama they should have the grid alone if that is what you need
Question:	How deep is this box
Answer:	16-18inch deep
Question:	does this collapse
Answer:	Yes it does
Question:	does this fit alien bees
Answer:	Yes, if you order the correct Glow EZ Lock Quick Softbox Speedring Insert 130mm for your monolight strobe. The Adorama website is unique among photography retailers in that they state what outer diameter the inner insert speedring mount should be to fit this outer speedring. They state "Take Note: Bowens speedring supplied (Insert Size 130mm), When buying diffrent speedring insert make sure to buy insert size 130mm." Thus you need to buy an inner speedring insert that is 130mm outer diameter, not the more common 139mm, 145mm or 152mm. Glow EZ sells these 130mm Quick Softbox Speedring Inserts for Elinchrom, Broncolor, Hensel, Balcar, Photogenic, Broncolor Pulso & Siros, Novatron, Comet, Multiblits-small, Multiblitz-Large, and Norman for $15 each. Reportedly a Balcar ring fits Alien Bees, so you probably want to order the Quick Softbox Speedring Insert 130mm for Balcar.

Product description

Crafter's Companion EZ Mount is a system of products that help you turn your unmounted rubber stamps into clings stamps, along with means to safely store them. Foam 1/8" Bulk- Sheet measure about 8.5"x 11"x 1/8". Mount any rubber stamp to this product so it can be used as a cling stamp with an acrylic block. Instructions for mounting included on packaging.

• This listing is for one sheet.

User questions & answers

Question:	When I remove my stamps from the blocks, do I need to keep the foam or does this also replace the foam
Answer:	You need to remove the foam from the rubber stamp, as there is foam attached to the sheet.
Question:	What is the difference between this and the sunday int ez mount static cling mounting
Answer:	the depth of the foam size, Sunday ez mount is standard, static cling is thinner
Question:	How many sheets is this
Answer:	There are two sheets in the package.
Question:	What is the best way to cut these
Answer:	Scissors are OK for straight sided stamps. The scissors become coated in glue with just a few passes, however, and need to be cleaned a lot during the process. The very best way to cut them is with a hot knife (AKA a wood burning tool) fitted with a blade attachment. I got mine at a local craft shop for under $10 with a discount. It cuts through the foam like butter. The blade will get dirty, but can be cleaned somewhat after cooling. It can be used to cut quite a few stamps before needing to be replaced. Here's how it's done: Cut a piece of foam to fit your stamp. Make it at least 1/8" bigger all around. I cut on a glass craft mat, just be sure to cut it on a surface that won't burn. Peel the plain paper off the back. That's the cling side. I place it on the glass mat so it lies flat. Sometimes the sheet comes curled on the sides. Peel the printed paper off the sticky side. Place the stamp on this side. Hold the heated knife straight up and down. Don't angle it or it will undercut the stamp. Follow the edge of the stamp. The rubber won't melt, just the foam. It's very easy to go around and into small spaces...very hard to do with scissors. I cut small sections at a time removing the waste as I go. The waste is very sticky and longer pieces get in the way. And that's it. I usually wait until I have a number of stamps to mount then do them all at once. Not only does removing the wood block make storing the stamps easier, but they are able to be used in a stamp platform like a Misty or Tim Holtz's Stamping Station.

Product description

EZ LYNK Window Mount

• Universal Mobile Device Mount
• Landscape and Portrait Viewing Options
• Adjustable Height
• Adhesive or Suction Mount Options
• Dash or Window Mount Ability

• ALL NEW 2021 TOLL PASS HOLDER - Our new 2021 holders are now stronger than before! The flexible base allows you to easily remove the holder from the windshield without breaking it. Plus, they are 100% UV Protective! / U.S Patented
• FITS ALL MAJOR TOLL PASSES - Old and New EZ Pass, FasTrak, IPass, IZoom, Sun pass, Fast Lane with HOV switch, Quick Pass, Elite Pass, PrePass (Including: New York, New Jersey, Massachusetts, Maine, Vermont, Pennsylvania, Delaware, Illinois, Maryland, Ohio, South Carolina, Indiana and Virginia)
• ATTACH IN JUST SECONDS - with suction cups which even come with RELEASE TABS so it is super easy to remove from the windshield.
• GREAT VALUE - 4pcs Reclosable EZ Pass Adhesive strip set are INCLUDED ($6.00 Value)
• 100% SATISFACTION GUARANTEE - Our toll pass holders are backed by 100% guarantee that you are fully satisfied with your product.

User questions & answers

Question:	Can you put a sticker type transponder on this and it work
Answer:	I would think, yes.
Question:	Where do I get replacement suction cups
Answer:	Have you tried contacting autoboxclub.com who makes the holder? I would think at approx. $8.00 per holder, it wouldn't be worth trying to replace the suction cups (mine has been on and off several times with no deterioration and currently has been on my vehicle for 5 months, installed in October, now almost March, and has stayed on with no issues.)
Question:	What size suction cups are needed when replacing, there are a bunch of different size listed on Amazon? Will any fit, not really meaning the top tab
Answer:	I would measure the ones it came with.
Question:	How can I get the different designs
Answer:	Just click on the design you like on the drop down selections if they are available.

Product features

Fits all NEW major toll pass holders

Reasons Why Our Customers Love the AutoBoxClub Holders

Mount Anywhere and GO!

Simply attach the holder to your

desired location. The extra strong

suction cups are weatherproof and

tested by thousands of our customers.

Product description

Crafter's Companion EZ Mount is a system of products that help you turn your unmounted rubber stamps into clings stamps, along with means to safely store them. Foam Thin Bulk- Sheet measure about 8.5"x 11"x 1/16". Mount any rubber stamp to this product so it can be used as a cling stamp with an acrylic block. Instructions for mounting included on packaging.

• Crafter's Companion EZ Mount is a system of products that help you turn your unmounted rubber stamps into clings stamps, along with means to safely store them
• Foam Thin Bulk- Sheet measure about 8
• 5"x 11"x 1/16"
• Mount any rubber stamp to this product so it can be used as a cling stamp with an acrylic block
• Instructions for mounting included on packaging

User questions & answers

Question:	What is the quantity
Answer:	It is one sheet, that measures 8.5" by 11".
Question:	How many pieces is this listing for
Answer:	Only 1 piece...a bit pricey for what it is but works well for Crafters. I am taking rubber stamps off of wood blocks for easier storage options.

Product description

Outerimpact is excited to introduce the red dot sight adapter for Smith & Wesson M&P 380 EZ Pistol. This product will allow the shooter to utilize a variety of red dot sights on their Smith & Wesson M&P 380 EZ Pistol with one adapter. We at Outerimpact have gone to great lengths to assure that the fit and finish of this system is top notch. Notice the incorporated alignment pins that are pressed into the dovetail. These allow for superior strength and increased the reliability of holding zero, thousands of rounds later. US Patent: US D851,196S

• Compatible Guns: Smith & Wesson M&P 380 EZ Shield
• Material: Billet 7075-T6 aluminum.
• Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3 (FOR BURRIS USE FACTORY STAR WASHER), Sig Romeo 3, XL, and MAX, UTG Reflex Micro dot. Compatible Red Dot Sights (Mounting Screws NOT INCLUDED): CMORE RTS & STS, Shield RMS, Holosun 407, 507, 508
• Coating: Anodize -- Finish: Black Anodize
• Mounting Hardware: 6-48 Weaver T-10 Torx Head screws. Sight alignment pins. M3 x 8mm Flat Head Screws. M3 x 6mm Flat Head Screws. M3 x 6mm Socket Head Cap Screws. 6-40 Flat Head Screws - RMR. M4 X 10mm Rounded Head Screws.

User questions & answers

Question:	Will this fit a holosun 507k or 407k
Answer:	It should work for them, as they use the same footprint as the Shield and Leupold which it does work for, but you might need to get different screws.
Question:	Will this fit a smith and wesson m&p 2.0 compact with 3.6 inch barrel
Answer:	No it will not but our M&P non-EZ model will. You can find it at this link or it is available immediately directly from our website. https://www.amazon.com/Outerimpact-Adapter-Mount-Wesson-Pistol/dp/B01N4K5XWH/ref=sr_1_3?crid=2CNB34TIZ9B1C&dchild=1&keywords=outerimpact+red+dot+adapter+m%26p&qid=1600203556&sprefix=outerimpact%2Caps%2C203&sr=8-3
Question:	Do i need to mill/modify my slide? yes i have the 380 ez
Answer:	No. It installs in the rear sight dovetail...you may need to file the bottom slightly to fit the dovetail but the slide will not need milled. It’s a very slick solution for the 380ez!!!
Question:	Will this fit a romeo zero on my S&W mp
Answer:	Did you even read the description of the item? "Outerimpact Red Dot Adapter/Mount for The Smith & Wesson M&P 380 EZ" It clearly states for The Smith & Wesson M&P 380 EZ. Unless your M&P 2.0 happens to also be a 380 EZ, then no this won't fit. Try the manufacturer's website for the other models they make

Product description

Fight the Fish, Not the Trolling Motor with Pro Controll EZ Mount 2! This trolling motor mount accepts almost any transom-mount trolling motor with a 1 inch to 3-inch-wide top rail and is limited to 40 pound thrust motors. It mounts to the boat's bow or anywhere else on the boat’s perimeter and can be installed in just minutes so you can get out on the water. REMOVE EXISTING BRACKET With the hammer and punch remove the hinge pin from the trolling motor bracket. Remove Bracket. Replace with EZ Mount 2 bracket by lining up the holes on EZ Mount 2 bracket with the holes on the hinge bracket and replace pin. If placing motor on front of boat, remove the small bolt that secures the trolling motor head to the shaft and turn head 180° so that the steering handle (tiller) and the propeller are facing the same direction. MOUNTING TO BOAT Loosen bracket by loosening skewer lever so bracket will move freely. Loosen skewer by pulling out on lever (open) and further loosening the nut at the opposite end by hand. Loosen clamp screws so that the mounting bracket will slide over boat railing keeping the clamp screws on the inside of the boat. Position mounting bracket resting firmly on side rail of boat. Hold mounting bracket against the outside of the boat rail with mounting base in a vertical (plumb) position slide bracket against outside of hull, then tighten nut on skewer firmly by hand then re-clamp or push lever on opposite end shut. With bracket secured, tighten clamp screws against inside of boat. Do not over tighten. After securing, check to see that mount is in a vertical (plumb) position, if not loosen clamp screws and bracket and repeat steps 4 and 5. Fish the EZ Mount 2 into your shopping cart now!

• QUICK & EASY INSTALLATION: The ProControll EZ Mount 2 allows you to connect your transom mount tolling motor on the bow or anywhere else on the perimeter of your jon or utility boat. It’s so simple and quick to install, you’ll be trolling in minutes!
• UNIVERSAL REPLACEMENT: It’s a universal bracket that replaces many models of transom mount trolling motors that use the thumb type tilt mechanism on their hinge bracket.
• UNMATCHED VERSATILITY: EZ Mount 2 solves the problem of having your trolling motor on the transom with your outboard. Now, you can put your hand-controlled trolling motor on any boat’s bow that has a 3 inch or less top rail or gunnel.
• BUILT TO LAST: The ProControll EZ Mount 2 system is designed to outlast the trolling motor! Made of rustproof, virtually indestructible, fiberglass reinforced nylon for strength, durability, and long life in harsh marine environments.
• SUPERIOR CHOICE: EZ Mount 2 is a universal bracket that receives any model of transom mount electric trolling motor for placement virtually anywhere. It’s limited to 40 lb. thrust motors and comes with a One-Year Limited Warranty.

User questions & answers

Question:	Does this bracket come with the hinge assembly
Answer:	No it does not, you just remove the pin on the existing bracket and slide off slide ours on and replace pin
Question:	Will this allow me to bow mount an endura max 40 transom mount? do i need any thing other than what is in this box
Answer:	I will fit your motor and you will not need to purchase anything else to change your bracket.
Question:	Does this come with a foot pedal
Answer:	Unfortunately it does not. This is only a replacement bracket that allows you to move your motor to the bow of the boat.

• 34" Glow EZ Lock Silver Beauty Dish, 34" External Diffuser, Internal Diffuser, 34" Eggcrate Grid, Bowens Speedring Adapter (Insert Size 150mm), Reversible Deflection Disk, Storage Bag, 2-Year Glow USA Warranty
• Quick and easy EZ Lock system for safe and sure setup Super-efficient 34" large beauty dish design Great for travel, location, and studio Soft beauty light for fashion and portrait photography
• More dramatic contrast and tactile feel than softboxes and umbrellas All of the benefits of a metal beauty dish without the worry of damage Reversible Deflector element assures no center hot spot
• Includes translucent diffusers for a broader light spread Eggcrate grids for extra beam control and spill kill Interchangeable speedring adapters for favorite flash reflector mounts
• The Glow EZ Lock Beauty Dish attaches onto the favorite Bowens mount with the included speedring, but most brands of studio flash and monolights can efficiently use this beauty dish with separately purchased Glow adapters for almost any monolight or the Glow S-Type Speedlite Bracket with Bowens S-Mount for speedlights and barebulb strobes.

User questions & answers

Question:	I am yogesh chinchale from india, please tell me where i can buy this item in india? and at what price? price in rupees please. collapsible beauty dis
Answer:	best option is Amazon or a store that sells camera gear and ships to your area
Question:	Is this work with godox 300 pro
Answer:	It has a Bowens mount so you would have to order a speedring to fit your 300 pro to the Octabox.
Question:	Is there a compatible model for the the Einstein E
Answer:	You will have to convert the mount to a Einstein or get a adapter to use the Bowens mount
Question:	Will this work with a Canon on camera flash
Answer:	It’s for off camera flash. You need something with a bowens mount. It’s too large for on camera.

Product features

Beauty Dish

Designed to add an element of glamour, the Glow EZ Lock Collapsible Beauty Dish will help your subjects “pop” in fashion and portrait photography. The beauty dish has a unique double reflector system that softens the flashes twice, ensuring your subject’s facial curves and features are highlighted with a nice, attractive light.

This 34" Silver version of the Glow EZ Lock Beauty Dish series glamourizes subjects from head and shoulders portraits to dramatic figure studies, an optimal tool for mastering all shooting situations where quality counts. It shines in tight spaces where softboxes and umbrellas cannot fit the set comfortably.

Travel-Friendly Beauty Lighting

The EZ LOCK Beauty Dish is constructed with solid aluminum umbrella-inspired framework. This design maximizes durability, minimizes weight, eliminates the need for separate support rods, and makes setup a breeze. Everything is simple, quick, and compact. After your shoot, the Beauty Dish breaks down instantly into a sleek carry case for travel and storage.

Premium Fabrics

Our diffusion panels are constructed with an all-natural, unbleached nylon fabric. Unlike processed diffusion fabrics, these diffusers will soften your light source without altering its color temperature. The Beauty Dish's white interior is reflective and softening, perfect for creating neutral highlights in beauty and fashion portraits.

Built to Last

The EZ LOCK Beauty Dish is engineered for durability and years of use in the field. This modifier is constructed with ultra-durable components including an all-metal locking collar and 16 all-metal ribs. The included deflector plate minimizes hot spots and creates stunning and dramatic beauty light output.

EZ Lock Collapsible Silver Beauty Dish

• Quick and easy EZ Lock system for safe and sure setup
• Super-efficient 34" large beauty dish design
• Great for travel, location, and studio
• Soft beauty light for fashion and portrait photography
• More dramatic contrast and tactile feel than softboxes and umbrellas
• All of the benefits of a metal beauty dish without the worry of damage
• Reversible Deflector element assures no center hot spot
• Includes translucent diffusers for a broader light spread
• Eggcrate grids for extra beam control and spill kill
• Interchangeable speedring adapters for favorite flash reflector mounts

EZ LOCK Light Modifiers

Glow EZ is the new line of umbrellas from Glow brand is easy to open with the Secure Push Button Locking Mechanism and its Deep Shape for Directional Control with 16-Rib Design. This is a unique light shaping tool with a deeper than normal profile, The exaggerated depth makes for a narrower beam than a standard umbrella, while still retaining some of an umbrella’s wrap around qualities.

Fast. Slick mechanism glides smoothly along shaft.

Easy. No hassles opening and closing

Locks. EZ grip lock is a breeze to use and unlocks without a struggle.

Diffused Lighting. The best balance of soft and delicacy in an umbrella design.

Large Source. Covers the subject with an even light fall.

Simple. Just slide the flash head on the shaft to change light distribution.

• Glow EZ Lock 38" Deep Parabolic Soft box, External Diffuser, Internal Diffuser, Eggcrate Grid, Bowens Mount Speedring Adapter (Insert Size 150mm), Reversible Deflection Cap Disk, Storage Bag, Glow 1 Year USA Warranty
• Deep Parabolic softbox, Quick and easy EZ Lock system for safe and sure setup, Quick to Assemble, Opens Like Umbrella, Easy. No hassles in opening and closing. Locks. EZ Lock is a breeze to use and unlocks without a struggle. Fast. Slick mechanism glides smoothly along the shaft.
• Fast. Slick mechanism glides smoothly along the shaft.
• Heat-Resistant Material, Removable Inner Baffle & Front Diffuser, Grid and Carrying Case Included, Reflective Silver Interior
• Carrying bag provided for easy transport, Standard Bowens mount speed ring included, can be swapped out with optional Elinchrom or Profoto models, Fabric grid included to tighten beam angle and help control unwanted light.

User questions & answers

Question:	What speedring adapter do i need for a paul c buff einstein strobe...or is there not one
Answer:	This is the adapter needed for the AB Mount. https://www.adorama.com/us%20%20%201173527.html?gclid=Cj0KCQjwrMHsBRCIARIsAFgSeI2PzGQYFLq4-gXNU6VkaKpt5Ee07y537UJI2eKjRT09pJa8pmeOZiQaAn2iEALw_wcB
Question:	Do I need a low profile adapter to use this with xplor 400 pro
Answer:	I didn’t on my 600 so you shouldn’t with your 400
Question:	This item does not ship to Europe? Why
Answer:	You have to contact the manufacturer
Question:	What fitting do I need for profoto
Answer:	Unlike the previous poster that clearly doesn’t own Profoto’s (why do people that clearly don’t know still leave an answer?). You need the 144mm for Profoto speedring adapter insert for Glow products. This is sold by Adorama for about 40.00 and is almost always out of stock. If the Glow products are everything people say it is, this is awesome for us Profoto people.

Product features

Deflection Disc

The reversible opaque deflector cover causes light to bounce throughout and flood the wall of the outer bowlof the softbox, resulting in a softer spread of indirect light. The effect is gentler than obtainable from a standard reflector and markedly less harsh than of a speedlight. By flipping the deflector plate, you can realize differing levels of light distribution.

Quick to Assemble

In essence, mastering the light is no accident. This one modifier can serve as a key light, as a prodigious reflector, imitate an outsized focusing umbrella, or by adding the gridded outer diffuser shield, change the overall wash of sharper light to aless harsh mood

Front Diffuser

Glow EZ Lock.

The FastPath To Light. For Studio, Location, or Home. As with all fine Glow products, this GLOW EZ LOCK 38" DEEP PARABOLIC SOFTBOX comes packaged in a fitted, durable fabric pouch, which protects it during transport and storage.

Grid Included

In essence, mastering the light is no accident. This one modifier can serve as a key light, as a prodigious reflector, imitate an outsized focusing umbrella, or by adding the gridded outer diffuser shield, change the overall wash of sharper light to aless harsh mood

Deflection Cap Disk

Reversible Deflection Cap Disk Beauty Dish Attachment. This can be used as an add-on to Deep Parabolic softboxes.

Zipper

The Parabolic Softbox is now fully opened and correctly constructed. Unzip the slit on the side of the softbox, reach inside, and grasp the speedring insert and the softbox firmly. Align the mount to mate with your flash and lock into place according to the flash manufacturer’s instructions, or replace the adapter to match the strobe of choice from the wide variety of Glow 150mm speedring inserts.

Storage Bag

As with all fine Glow products, this GLOW EZ LOCK 38" DEEP PARABOLIC SOFTBOX comes packaged in a fitted, durable fabric pouch, which protects it during transport and storage.

Includes:

Glow EZ Lock 38" Deep Parabolic Softbox

External Diffuser

Internal Diffuser

Eggcrate Grid

Bowens Mount Speedring Adapter (Insert Size 150mm)

Reversible Deflection Cap Disk

Storage Bag

Fast. Easy. Locks.

Glow EZ is the new line of umbrellas Softboxes from Glow brand is easy to open with the Secure Push Button Locking Mechanism and its Deep Shape for Directional Control with 16-Rib Design. This is a unique light shaping tool with a deeper than normal profile, The exaggerated depth makes for a narrower beam than a standard umbrella, while still retaining some of an umbrella’s wrap around qualities..

• Fast.Slick mechanism glides smoothly along shaft.
• Easy.No hassles opening and closing.
• Locks.EZ grip lock is a breeze to use and unlocks without a struggle.
• Diffused Lighting.The best balance of soft and delicacy in an umbrella design.
• Large Source.Covers the subject with an even light fall.
• Simple.Just slide the flash head on the shaft to change light distribution