6 best flash trigger for nikon dslrs

A flash trigger for Nikon DSLRs is a device used to remotely activate an external flash unit or multiple flash units. It allows photographers to control the timing and intensity of the flash without having to physically touch the flash units or the camera.Flash triggers are commonly used in various photography scenarios, such as studio photography, portrait photography, and off-camera flash setups. Here are some key aspects related to flash triggers for Nikon DSLRs:

Wireless Flash Triggers: Many flash triggers are wireless, allowing photographers to trigger their flashes from a distance without the need for physical cables. These wireless triggers use radio frequency (RF) signals or infrared (IR) signals to communicate between the camera and the flash units.
Compatibility: When choosing a flash trigger for a Nikon DSLR, it's essential to ensure that it is compatible with your specific camera model. Different Nikon cameras may have different compatibility requirements, so check the manufacturer's specifications to ensure compatibility.
Transmitter and Receiver: Flash triggers typically consist of two components - a transmitter and a receiver. The transmitter is attached to the camera's hot shoe or connected to the camera via a cable. The receiver is attached to the external flash unit. When the photographer triggers the camera's shutter, the transmitter sends a signal to the receiver, which, in turn, fires the flash.
Channels and Groups: Many flash triggers offer multiple channels and groups. Channels allow photographers to work in environments where there may be interference from other photographers using flash triggers. Groups enable photographers to control different sets of flashes independently, making it easier to achieve specific lighting effects.
Flash Sync Speed: The flash trigger should support the camera's flash sync speed. This is the maximum shutter speed at which the camera can synchronize with the flash. Using a flash trigger that doesn't support the camera's sync speed may result in partial darkening of the image.
Range: The range of the flash trigger is essential, especially for outdoor photography or larger studio setups. Ensure that the trigger's range meets your specific needs.
TTL vs. Manual Mode: Some flash triggers support TTL (Through-The-Lens) metering, allowing for automatic flash exposure adjustments. Others operate only in manual mode, requiring manual flash power adjustments. Choose the mode that best suits your photography style and needs.
Power Source: Flash triggers are typically powered by batteries. Consider the type and longevity of batteries required by the trigger, as this can impact your shooting experience.
Additional Features: Some flash triggers offer additional features such as high-speed sync (HSS), second curtain sync, and support for multi-flash setups. These features can be useful for creative lighting effects.
Build Quality and Reliability: Ensure that the flash trigger is well-built and reliable, as it plays a crucial role in capturing consistent and precise lighting in your photographs.

Remember that the specific flash trigger you choose will depend on your photography requirements and preferences. Always refer to the manufacturer's documentation and compatibility charts to make sure your flash trigger is compatible with your Nikon DSLR model.

Below you can find our editor's choice of the best flash trigger for nikon dslrs on the market

YONGNUO Wireless Shutter Release & Flash Trigger RF-603II N3 for Nikon DSLR D90 D600 D7100 D7000 D5100 D5000 D3100 D3000

Based on 58 reviews Check latest price

Wireless Remote Shutter Release ( On camera )--- You can mount one receiver into the camera and connect it with the camera via the 2.5mm shutter connecting cable, and can remote control the camera with other receiver. You can use it to fulfill the function of Auto-Focus, Continuous shooting, Long Exposure, Half-Way Pressing, Full-way Pressing and Bulb.
Remote Shutter Release ( off Camera )--- You can use the single receiver to fulfill the function of remote shutter release after you connect it with your camera via the 2.5mm cable
To fire the Flash Speedlite --- one receiver can fire one flash speedlite, one set of RF-603 can control 2pcs Flash Speedlite at the same time.
The highest flash sync speed up to 1/320 second (some of models may only reach to 1/250s or less, difference combination of models of flash and camera using may achieved difference flash sync speed).
Adding the Locking rings. Improved Flash / Shutter control Buttons. Working for more non Canon/Nikon cameras and single firing pin cameras.

User questions & answers

Question:	does it works with nikon d
Answer:	Probably
Question:	Can I use this to fire Impact brand studio lights? (In place of a sync cable
Answer:	I think so
Question:	Will this work with Nikon D
Answer:	One of the answers from a 5 star review. This is not from me but another review."I was looking for one that would fit the Neewer VK750 II i-TTL and came upon this. It fits! Not the exact shape for the nooks and crannies, but does go over the front end of the flash and does the job."
Question:	Does this work with a Nikon D
Answer:	This one is the perfect bounce diffuser for your Neewer Speedlight VK 750II
Question:	How do I use my warranty? And how long is it good for
Answer:	Hello You can use it in manual mode Thank you
Question:	Will this work for a Canon T2i allowing for Canon's E-TTL metering or should I just stick with the Neewer TT560 for manuel mode
Answer:	Only yongnuo flash
Question:	Does it works with NIKON D
Answer:	Hi, it's for Nikon camera.
Question:	All things being equal, is there any reason why I wouldn't buy the YN 560 IV instead of this model
Answer:	Working with my Sony A6500

Product features

YONGNUO RF-603 II N3 Radio Wireless Remote Flash Trigger for Nikon D7300 D7200 D7100 D7000 D5500 D5400 D5300 D3300 D3400

RF603 II, the manual Flash trigger and shutter release ( you can use those two functions simultaneity ), it adopts a global free FSK 2.4GHz wireless channel which can be suitable in many countries. RF-603 II with FSK system, can be more effective to speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m.

Yongnuo RF603 II wireless flash trigger kit is formed by two same transeivers. It can be set to single transmit state(TX), which will be more convenient for testing flash, and can be set to transceiver state, automatically switch transmit and receive state, adopts 2 levers button design, it will realize the awakening, flash testing, focus and shutter function in state repectively.
Transmitter supports single contract triggering, supports wireless wakening up and triggering the flash through the camera hot shoe, with PC sync cable(optional) can be trigger studio lights, with specially camera shutter connecting cable can realize wired wireless shutter release remote control, supports controlling multiple cameras and flashes at the same time.
A set consist of 2 equal transceivers. Both of them can be a receiver as well as transmitter. It can trigger 1 flash with one set, since one serves as trigger and one as receiver. You can also buy additional transceivers to trigger 2 or more flashes at the same time.
It can fire the Studio Strobe light --- You need to purchase an extra 6.35mm cable to fulfill this functio

Compatible with:

For Nikon D7300 D7200 D7100 D5500 D5300 D5200 D90 D600 D7100 D7000 D5100 D5000 D3300 D3200 D3100 D3000

Package including:

1 x RF603N II N3 Flash Trigger ( 2pcs Transceivers )
1 x 2.5mm port Shutter release cable ( N3 version )
1 x Manual in English and Chinese

Godox X1N i-TTL 2.4G Wireless Flash Trigger Transmitter + Receiver for Nikon DSLR Cameras (X1T-N + X1R-N)

Based on 24 reviews Check latest price

Product description

Specifications:

X1N for Nikon Compatible with: Nikon DSLR cameras (i-TTL autoflash)

Support all cameras that have PC sync socket

Build-in Remote System: 2.4 G wireless transmission

Modulation Method: MSK

Power Supply: 2*AA batteries

Exposure Control:

Manual Flash: Support

TTL Auto Flash: i-TTL II

TTL Control:

High Speed Sync (HSS): Yes

Flash Exposure Compensation (FEC):Yes, ±3 stops 1/3 stop increments

Flash Exposure Lock (FEL): Yes

Focus Assist: Manual open

Rear Curtain Sync: No

Modeling Flash: Support, fired with cameras depth of field preview button

Wireless Flash:

Wireless Function:in TTL mode, Ratio off ; in M mode, Flash Ratio(A B C) ; Support GR (grouping flash)

Controlled Slave Groups: in the GR grouping mode, 5 (A/B/C/D/E) ; in the Ratio grouping mode, 3(A/B/C)

Transmitter Distance: >100 meters

Channel:32 channels

Others:

Synchronization Delay Set: Yes (0-10ms,use 100us as the unit)

Wireless Shutter Release: Receiver can control cameras shooting through 2.5mm shutter release interface

Zoom Setting: The focal length can be adjusted through the transmitter

Display Panel: Wide LCD panel, backlight on/off

Output Interface: Transmitter: use a PC port to input and output ; Receiver: use a 2.5mm sync cable to output

Firmware Upgrade: Use the Micro USB port to upgrade

Memory Function: Settings will be stored 2 seconds after last operation and recover after a restart

Transmitter Size/ Weight: 72x75x52(mm)/100g

Package Included:

1X X1N Transmitter

1X X1N Receiver

With 2.4G wireless transmission system, X1N (for Nikon) can be used to trigger camera flash, studio flash and camera shutter over 100 meters’ distance.
Fully support TTL functions, support for i-TTL autoflash, manual flash, 1/8000 high-speed sync, flash exposure compensation, flash exposure lock, modeling flash, etc
Transmitter use a PC port to input and output, receiver use a 2.5mm sync cable to output, settings will be stored 2 seconds after last operation and recover after a restart
Featuring multi-channel triggering, stable signal transmission, and sensitive reaction, it can be used to trigger camera shutter, studio flash and camera flash
Godox first TTL wireless flash trigger X1N (for nikon) suitable for Nikon D610 D800E D800 D700 D300s D300 D600 D5300 D5200 D3100 D7100 D90 D4s D3

Godox X1R-N TTL 2.4G Wireless Flash Trigger Receiver for Nikon DSLR Camera for X1N Trigger

GODOX

Based on 91 reviews Check latest price

Product description

Features: Godox first TTL wireless flash trigger receiver X1R-N is suitable for Nikon DSLR cameras. 2.4G wireless transmission, 32 channels, the max. flash synchronization speed is up to 1/8000s*. Featuring multi-channel triggering, stable signal transmission, and sensitive reaction. The receiver equips with big LCD panel to offer convenient operation. It can be used with one trigger or X1N kit to trigger camera, studio flash and camera flash. X1R-N is compatible with market-available cameras which support i-TTL. Compatible for Nikon DSLR camereas(i-TTL autoflash); Support all cameras that have PC sync socket. Note: 1/8000s is achievable when the camera has a max camera shutter speed of 1/8000s. Specifications: Brand: Godox Model: X1R-N Type: For Nikon Compatible With: For Nikon DSLR cameras (i-TTL autoflash); Support all cameras that have PC sync socket Build-in Remote System: 2.4 G wireless transmission Modulation Method: MSK Power Supply: 2 * AA batteries (not included) --Exposure Control: Manual Flash: Yes TTL Auto Flash: i-TTL --TTL Control: High Speed Sync: Yes Flash Exposure Compensation: Yes, ±3 stops 1/3 stop increments Flash Exposure Lock: Yes Focus Assist: Manual open Multi Flash: Yes (AD360Ⅱ/TT685N as receiver) Second curtain sync: Yes(setting on the camera) Modeling flash: Yes, fired with camera's depth-of-field preview button --Wireless Flash: Wireles function: Compatible for Nikon CLS(creating lighting system) Controllable slave group: Max. 6 groups (M/A/B/C/D/E) Transmission range(approx.): >100 meters Channel: 32 channels --Others: Synchronization Delay Set: Yes (0-10ms,use 100us as the unit) Zoom Setting: The focal length can be adjusted through the transmitter Display Panel: Wide LCD panel, backlight on/off Output Interface: Receiver: use a 2.5mm sync cord to output Memory Function: Settings will be stored 2 seconds after last operation and recover after a restart Receiver Size/Weight: 7 * 6.5 * 4.7cm / 68.5g Package Size: 11 * 5.5 * 11cm / 4.3

User questions & answers

Question:	Can i use this to trigger an alien bee b
Answer:	Yes, with the sync cable included.
Question:	Does anyone else have their nikon sb-600 or sb-800 etc backlights on the flash itself never turn off when connected to this unit? i cannot turn off
Answer:	Works fine with mine. Can you turn on and off when not connected? Try cleaning the flash contacts with a pencil eraser but wipe it down before using.Reset the flash or remove and reinsert the batteries! Let us know!
Question:	Will the x1r-n work with a sb800 flash ,fuji xh-1 camera and a x pro f transmitter
Answer:	No
Question:	Would the receiver work for Nikon Speed Light SB-600? Can the zoom and power settings be sync from the transmitter
Answer:	I don’t know the answer. However you can ask it at this forum. Some one there should known. https://www.facebook.com/groups/godoxusergroup/

Neewer 16 Channel 2.4G Wireless Studio Flash Trigger Receiver Transmitter Set for Canon Nikon Sony DSLR Camera and S-300N S-400N N-250W N-300W etc. Strobe Monolights with Standard Sync Port (RC100)

Based on 111 reviews Check latest price

Product description

Note: Monolight, Camera, Light Stand and Battry are not included.

Description:

This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously.

Easy installation, low power consumption

No any damage to camera.

Sync speed：1/125 second.

Max. working distance: Max. working distance: 20m(open area, without interference),Indoor working distance: 8-10m(with interference)

Built-in 2.4G Receiver with 16 Channelsto avoid interference

The receiver has an on/off switch, and an LED to indicate triggering

Power Input of Transmitter: 1x 1.5V AAA battery,Power Input of Receiver: 2x 1.5V AAA batteries;

Material: Metal & Plastic

Transmitter Size: 3.7x 1.5x 0.87 inch/ 9.4x 3.8x 2.2 centimeter

Receiver Size: 3.78x 1.5x 0.79 inch/ 9.6x 3.8x 2 centimeter

Transmitter Weight: 25 ounce/ 0.71 kilogram

Receiver Weight: 27.5 ounce/ 0.78 kilogram

Package Contents :

1x Transmitter

1x Receiver

Compatibility: The Trigger is designed for photographic studio and on-location work to trigger various Monolight, Outdoor strobe flash lights; Compatible with Canon Nikon Panasonic Olympus Pentax with Standard Hot Shoe and Sony Camera with New Mi Hot Shoe like Sony A7 A7S/A7SII /A7RII A7II A6000 A6300 A6500, and S-300N S-400N N-250W N-300W C-250 C-300 DS300 SK300 300DI 250DI 300SDI 250SDI, etc. Strobe Monolight with Standard Sync Port
Wireless Function: The transmitter is attached on the hot shoe of the camera while the receiver is plugged into the studio flash,Built-in 2.4G Receiver with 16 Channels to avoid interference, The receiver has an on/off switch, and an LED to indicate triggering
High-speed and Synchronous: High-speed and synchronous for 1/200 second; Easy installation, low power consumption
Working Distance: Max. working distance: 30M(open area, without interference); Indoor Max. working distance: 20M (open area, with interference)
Power Input: Power Input of Transmitter: 1x 1.5V AAA battery; Power Input of Receiver: 2x 1.5V AAA batteries; NOTE: Battery NOT Included

User questions & answers

Question:	On my Sony a6300, the transmitter only works once after plugging it in - additional shots don't trigger - unplug/replug and you get one more - ideas
Answer:	I'm 105lb and I ordered a sz small. It's tight and gives great support. I think it runs true to size.
Question:	Will this work on Alienbee
Answer:	On me, the flexees are not tight at all around the shorts area and there is no roll.
Question:	Can this work with Sony a99 ii
Answer:	Yes, this one is a good choice.
Question:	So if i purchase 3 strobes will i need 3 recivers
Answer:	If you are comparing Spanx with the panty girdles that were available before Spanx, the Spanx panty is much more "fluid" and gentle to the wearer, so it doesn't "cut" or create abrupt bulges (at least not on me). It also breathes and I can wear it in hotter weather than the older type of girdle/shaper.

Product features

Neewer 16-Channel 2.4G Wireless Studio Flash Trigger Receiver Transmitter Set

Powerextra LCD Display Flash Speedlite, 2.4G Wireless Flash Trigger Transmitter Kit for Canon Nikon Pentax Panasonic Olympus and Sony DSLR Camera, Digital Cameras with Standard Hot Shoe

Based on 398 reviews Check latest price

Wide Compatibility: Great camera flash with High Guide No.33 (ISO 100, 35mm), supports manual/S1/S2/Multi flash mode. Compatible with most Canon Nikon Panasonic Olympus Pentax and Other DSLR cameras with standard hot shoe and Sony Camera with New Mi Hot Shoe like Sony A7 A7S/A7SII A7R/A7RII A7II A6000 A6300 A6500 (NOT compatible with Canon 1500d/2000d/4000d)
2.4G Wireless Trigger Transmitter: 15-channel transmitter and receiver unit with operating range of 50m (164ft). Goes into RX Slave Flash Mode, it supports WT-U trigger, equipped with 15 channels. Only need to set the flash and trigger WT-U at the same channel when using. That trigger system can set multi flashes lighting application
Rotation Angle and More Function: Vertical rotation angle: -7~90 degrees, horizontal rotation angle: 0~270 degrees, fixed zoom, provide you with a rich flash perspective. Additional Function: Power saving mode, synchronization, external charging, over temperature protection and systematic over temperature protection fuction
MuIti Flash Mode: The flash will fire at the your setting of output power. The range of output power is 1/128-1/64/-1/32/-1/16-1/8-1/4-1/2-1/1. You can test the flash under any mode. When testing, the flash will flash with corresponding brightness according to the selected output power level
What You Get: 1 x Speedlite Flash built-in flip down wide angle flash diffuser and reflection panel, 1 x Mini Stand, 1 x 2.4G Wireless Flash Trigger, 1 x User Manual

User questions & answers

Question:	es compatible con nikon d
Answer:	I have a Nikon 3500 and it works well!
Question:	Whats the longevity, of this flash
Answer:	I've had it for about a year now with no issues. I don't use it all the time though.
Question:	Does it work with nikon d
Answer:	I don't know about that
Question:	Will this work with cannon rebel t3i
Answer:	No....does not work.

Product features

Powerextra Professional LCD Screen Flash Speedlite With 2.4G Trigger Kit

M Modes:

In this mode, you can set your flash onto your camera hot-shoe or speedlite trigger hot-shoe to trigger the flash. When shooting, adjust the flash power and press the camera shutter button, the flash light will flash under the camera synchronous signal.

MuIti Flash Mode:

Under Multi flash mode, the flash will fire at the your setting of output power/ flash frequency and flash times. And through left/right Fn button you can adjust the output power. The range of output power is 1/128-1/64/-1/32/-1/16-1/8-1/4. If need to set flash times and frequency, please press the flash times/frequency select button. the multi flash time/frequency instruction icon will flicker in the LCD, at this time you can adjust the flash times/flash frequency through left/right Fn button.

S1 /S2 Modes:

The mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for manual flash environment. When the flash is S1 mode, it will fire synchronously when the master flash comparable with effect by the flash trigger.

NOTE: Use reflection board to take photos

When bounce flash, use built-in reflection board can make the subject's eyes brighter and more charming, also can avoid lightening the front place of subject.

2.4G WT-U Trigger

Trigger Specification:

Mode: WT-U

Channel: 15 channels

Net Weight: 38g

Transmission Distance: 50m

Wireless Frequency: 2.4G

Power Source: 23A 12V alkaline battery

Powerextra Flash Speedlite, 2.4G Wireless Flash Trigger Transmitter Kit for Canon Nikon Panasonic Olympus Pentax and Sony DSLR Camera, Digital Cameras with Standard Hot Shoe

Based on 144 reviews Check latest price

Wide Compatibility: Great flash with High Guide No.33 (ISO 100, 35mm), supports manual/S1/S2 flash mode. Compatible with most Canon Nikon Panasonic Olympus Pentax and Other DSLR cameras with standard hot shoe and Sony Camera with New Mi Hot Shoe like Sony A7 A7S/A7SII A7R/A7RII A7II A6000 A6300 A6500 (NOT Compatible with Canon 1500d/2000d/4000d).
2.4G Wireless System: Flash with built in 2.4G wireless. Transmitter unit supports 15-channel, with operating range of 50m (164 ft). Goes into the flash 2.4G mode, when the indicator of channel LED light on, adjust to choose the channel. NOTE: the flash will be triggered only when the flash and trigger are in the same channel.
Rotation Angle and More Function: Vertical rotation angle: -7~90 degrees, horizontal rotation angle: 0~270 degrees, fixed zoom, provide you with a rich flash perspective. Additional Function: Power saving mode, synchronization, external charging, over temperature protection and systematic over temperature protection fuction.
Power Control: This flash has 8 levels of output control which indicated by 8 pcs LED lamp for different level to control the exposure manually. Press "+" to raise and lower power: 1/128,1/64,1/32,1/16,1/8,1/4,1/2,1/1.
What You Get: 1 x Speedlite Flash built-in flip down wide angle flash diffuser and reflection panel, 1 x Mini Stand, 1 x 2.4G Wireless Flash Trigger, 1 x User Manual

User questions & answers

Question:	Q: Can it be attached to a stand and does it work with camera canon 200d
Answer:	Either
Question:	does it work on nikon D
Answer:	Yes it will work with any Nikon camera
Question:	Does this work with the canon t
Answer:	Basically me I used it for Sony a6000 and it seems to be compatible with Canon t7 since it worked very well on a rear product, therefore it must work fine on a common product.
Question:	is this compatible with the Nikon D
Answer:	Not sure I’m a canon shooter. However I imagine if you have a hot shoe it will work.

Product features

Powerextra Professional Flash Speedlite With 2.4G Trigger Transmitter Kit

3 Flash Modes:

M Modes:

S1 Modes:

S2 Mode:

The mode is applicable for slave flash in order to many lighting effects. The flash won't flash synchronous with the first but the second flash from the master flash, which is the second flash synchronization.

NOTE: Use reflection board to take photos

When bounce flash, use built-in reflection board can make the subject's eyes brighter and more charming, also can avoid lightening the front place of subject.