13 best camera lens hoods

Product description

NOTE: Altura Photo lens hood is compatible with all 58mm lenses. Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "Ø" (diameter) symbol. For example: Ø58 = 58m lens thread size.

- New Professional Altura Photo 58mm Camera Lens Hood

- The addition of a lens hood can help prevent flares-those circles of light that can accompany images where a strong light source is just outside the frame.

- Professional tulip shape design (also known as 'flower' or 'petal' shape) allows for greater versatility. Perfect for standard or zoom lenses.

- Easy to use screw mount lens hood screws right onto your lens or filter.

- Features a rear locking ring to allow user to rotate the hood in either direction and capture the exact amount of shading desired.

- Lens hoods also have the added benefit of providing extra protection to your lens from accidental bumps or scratches.

- Hard rubber lens hood for an extremely solid and lightweight feel. Specifically designed for a tight and secure fit. No wobbling or cross-threading.

- Lens hoods are one of the most important accessories you can purchase to improve the quality of your photos, and usually the most overlooked by beginner and amateur photographers.

Compatibility:

Canon Rebel T7 T7i T6i T6 T6s T5i T5 T4i T3i SL3 SL2 SL1, Canon EOS 80D 77D 70D 1100D 700D 650D 600D 550D and more.

• NOTE: Altura Photo lens hood is compatible with all 58mm lenses. Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "Ø" (diameter) symbol. For example: Ø58 = 58mm lens thread size. This is a non-reversible hood.
• Compatibilities: Canon Rebel T8i T7 T7i T6i T6 T6s T5i T5 T4i T3i SL3 SL2 SL1, Canon EOS 90D 80D 77D 70D 1100D 700D 650D 600D 550D and more.
• Also Compatible with Nikon AF-S 50mm f/1.8G, 50mm f/1.4G, 55-300mm f/4.5-5.6G and New AF-P 70-300mm f/4.5-6.3G ED.
• Important: This lens hood is not suitable for wide angle shots, it will produce vignetting in focal lengths of 25mm or less.
• Backed with DigitalGoja 90-Day 100% Satisfaction Guarantee. No Hassle Returns and Refunds.

User questions & answers

Question:	Will it fit on a lumix dmc fz5 35mm
Answer:	If your lens says 52mm it will work, look on your lens and it should have a 0 with a line through it and should have 52mm after that
Question:	Will this fit on the nikon d3200 18-55mm lens
Answer:	Yes, it will. But to be absolutely sure, look at the end of your lens. There will be a number that looks like this Ø52. If you don't see that number on your lens, this hood will not fit.
Question:	Will it fit the Nikon D3300? It has a retractable lens, so I wanted to double check
Answer:	It will fit the kit lense for the Nikon D3300. Although this hood does not screw on in reverse.
Question:	Will this fit the 18-55 mm Nikkor AF-S DX VR Lens for Nikon D
Answer:	Yes! He 18-55 has a 52mm hood ring size... Perfect fit!

Product description

58mm Collapsible Rubber Lens Hood

- Rubber lens hoods provide extra protection from accidental bumps or scratches thanks to high quality shock absorbent rubber.

- The addition of a lens hood can help prevent flares-those circles of light that can accompany images where a strong light source is just outside the frame.

- 3-in-1 Collapsible design, Extend to full length for use with a telephoto lens, Collapse midway for wide angle shots, Collapse completely for macro photography or easy and compact storage

- Features a metal ring screw mount for easy attachment to your lens or filter. Specially designed for a tight and secure fit. No wobbling or cross-threading.

- Double threaded screw mount also allows you to attach lens caps, filters, or other accessories on the hood itself without the need to remove the hood first.

58mm Reversible Camera Lens Hood

- Professional tulip shape design (also known as flower or petal shape) allows for greater versatility. Perfect for standard or zoom lenses.

- Unique design for quickly detaching and mounting. Normal mode and reverse mode for using.

- Easy to use screw mount lens hood screws right onto your lens or filter.

- Features a rear locking ring to allow user to rotate the hood in either direction and capture the exact amount of shading desired.

58mm Center Pinch Lens Cap

- Center pinch design allows easy attachment and removal, even with a lens hood in place.

Microfiber Cleaning Cloth

- Ultra gentle! Extremely fine microfiber leaves zero scratches, streaks or marks. Safe for all lenses.

• ULTIMATE LENS HOOD SET YOU NEED, Set include: 58mm 3 Stages Collapsible Rubber Lens Hood, 58mm Reversible Tulip flower Lens Hood, 58mm Center Pinch Lens Cap, Premium Microfiber Lens Cleaning Cloth.
• REVERSIBLE TULIP FLOWER LENS HOOD: Unique design for quickly detaching and mounting. Normal mode and reverse mode for using. The only flower lens hood on the market that lets you use a lens cap while having the lens hood mounted.
• COLLAPSIBLE RUBBER LENS HOOD: 3-in-1 design for use with wide-angle, standard, telephoto zoom/non-zoom lenses. Prevents lens flare caused by extraneous light and protects against unexpected bumps or shock.
• COMPATIBLE With: CANON Rebel (T6i T6 T5i T5 T4i T3i T3 T2i T1i XT XTi XSi SL1), CANON EOS (700D 650D 600D 550D 500D 450D 400D 350D 300D 1100D 1000D 100D 60D) with 58MM Lens wich include: EF-S 18-55mm f/3.5-5.6 IS II , EF-S 55-250mm f/4-5.6 IS II , EF 50mm f/1.4 USM , EF 75-300mm f/4-5.6 III USM, Nikon AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED, AF-S DX 55-300mm f/4.5-5.6G ED and other 58MM lens
• NOTE: This set is compatible with all 58mm lenses, please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "Φ" (diameter) symbol.For example: Φ58 = 58mm lens thread size.

User questions & answers

Question:	Is this compatible with the nikon d7200? one response was "it's not the camera but it's the size of the lens". specs listed only goes up to d
Answer:	Yes, which size will fit the lens is up to your lens but not camera. If your lens is Nikon D7200 AF-S DX NIKKOR 18-140mm, this 67mm lens hood will fit. Thanks.
Question:	Ok, dumb question. What is the metal thing with a point that’s in with the pinch cap
Answer:	The metal thing with a point... Is to push the cable (string) throughout the holes on the pinch cap.. Is a little bit harder without the metal.
Question:	Amateur question, but can you use a 55mm-to-58mm step up ring to use a 58mm hood on a 55mm lens
Answer:	You can always step down when using a larger filter/lens hood on a smaller thread. Why not just buy the right size hood instead. I am not one to use stepping rings unless I have to.
Question:	Can you attach filters to both lens hoods? That is..thread the hood onto lens first and then thread filter onto hood
Answer:	Yes, both lens hood PAIR WITH FILTER, Our lens hoods provide with Filter Thread, allowing you to pair these hoods with filter and lens cap. Thank you.

• Includes: 58MM Tulip Flower Lens Hood + 58MM Collapsible Rubber Lens Hood + Premium MagicFiber
• NOTE: This set is compatible with all 58mm lenses. Please verify your camera's lens thread size
• Compatible with the CANON Rebel (T5i T4i T3i T3 T2i T1i XT XTi XSi SL1), CANON EOS (700D 650D 600D
• Backed with DigitalGoja 90-Day 100% Satisfaction Guarantee.

User questions & answers

Question:	which size should I buy for my canon 50mm 1.4? 52,58 or 67mm
Answer:	For a 50mm. The 52 won't fit 50mm ring the hood will be a bit big its not goin to screw on correctly.. Youll have to get a 50mm hood for the 50 mm that you have.
Question:	Can you see the lens hood in a shot
Answer:	You can. If you have a 18-55 lens it will appear until between de ranges of 18-24mm after than you’ll not see it.
Question:	Would this be compatible on Canon rebel t6i? 55mm
Answer:	The T6i is a 58mm lens. Its standard lens hooting distance is 18-55mm
Question:	Will the lens hood fit on the canon t1i original 55 mm lens
Answer:	From what I understand that size is no longer an industry standard just like the 45 mm size, so you have two different options here and depending on your income these answers plus your preference will help you make a decision on what to do next. 1st, you can spend the money to purchase a new/used lens which is a "Industry" standard and buy all of the accessories that you need for it. Now you're thinking at this point? "What if it doesn't fit my camera?" Now remember when I said "Industry Standard",well here's where it really comes in. Now there you don't have to worry because Canon in all it's wisdom has designed their camera's lens collar on all it's SLR cameras to a standard size, so if you have an old Canon SLR from the 80's and you want to know what the newest lenses look like through it, it will fit, but the older SLR probably not be able to operate all of the bells and whistles that comes with the newest version of lenses and vice-versa, but buying new lens does get expensive and then you think to yourself that "Now I have to buy this & that for my new lens". And this is true, but here's my 2nd point, if you don't have an issue with used equipment and if you're just like me you don't really care if you fall into the bushes and/or sand, ect. But as long as my camera is safe and clean and we get the shot we just about broke our necks for is perfect. So I tend to find that most other photographers are the same way and if we damage our equipment then we can't take the next "Perfect" shot. So consider used equipment, but don't make the same mistake that my neighbor did, we compare shots and stories on how we almost killed ourselves talking it as well, anyhow about 4 years ago he came to me bragging about this new lens he just got at a very cheap price. So I happen to look into the lens and I see a small crack in the back of the second lens and I tell him that this looks like it was dropped and was never fixed, he said that he saw that and the guy at the pawnshop said that if he ever had a problem with it that all he needs to do is to bring it back for a refund. Well I was right and on humid day he was out shooting a hawk that he's been trying to photograph for a very long time and would not stay still and right when he went to take the picture and the lens was turned to focus. The lens began to fog up. Because of the crack that we saw turned out to be a breach in the seal which allowed the lens to fog. So he went to the pawnshop for his guaranteed refund, but when he got to the pawnshop to get his money back he found out that the lens plus several other items that he had purchased and were stolen, and because of his so called friend who sold him the lens had not given him a receipt he was out of luck and the police confiscated the lens and he lost his $90.00 so if you decide to buy used equipment, I'd recommend that you go to a photography shop and they should have a wide selection of new and used equipment. Which is your second option, try a used camera store and they might have those unique accessories that are not "Industry Standard" and they could have the tulip hood in that size. Now if you try to make due with a 58mm like Gary Moore had indicated, you will find that the tulip hood will be too large to fit and to force it would ruin your lens. However if you decide to use this method, then I'd recommend that you carry with you a small roll of blue tape, it works great for the temporary fixes and comes off without leaving any residue or glue, plus if you happen to get that little bit of collection on the edge of your lens then you can use the same blue tape to pull that crud off without damaging any of your equipment. I hope this helps.

• 1.Unique Design: Quickly detaching and mounting. Normal mode and reverse mode for using. The main function is to avoid reflection when photographing & shooting through glass / windows.Once used in reverse, it can add a simple waterproof splash protection for the camera and avoid damage caused by spray, snow, dirt, sand and gravel.
• 2.High Quality Material:The mask is made of waterproof silicone and can be easily applied to the glass surface.There are no marks on the Window and keep them clean in any situation.Very soft ,conveniently folded and easily opened when needed.
• 3.Usage scenarios：When you're shooting through a hotel window, a skyscraper observation deck, the window of a bus or a zoo enclosure, removing glare by day and reflections by night, can be used any time you need it. Lightweight and portable, easy to carry and use.
• 4.Compatible: This lens hood is compatible with all 70-90mm lenses, please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "Φ" (diameter) symbol.For example: Φ58 = 58mm lens thread size.
• 5.NOTE : Package just lens hood,the Camera is excluding.STSEETOP ,Trustful Partner for your camera.

User questions & answers

Question:	Is this good for shooting through a car windshield
Answer:	Sure is. That’s primarily what I use it for - thru car windows!
Question:	Will the 50-70mm hood fit both my 67mm and 72mm lens? I don't want to have to get 2 different hoods if I don't have to
Answer:	The fit on these hoods are very tight and do not stretch that easy. The 50-70mm size will absolutely not fit on a 72mm filter size lens. You're much better off getting the larger 70-90mm hood for your 72mm lens and use a strap or twist tie to tighten it up if it's too loose on the 67mm.
Question:	Can this be used instead of a tulip shaped hood? I can't use my threads but need a hood for a shoot
Answer:	It's for putting up to glass, such as windows so you can shoot throw it without reflections. Probably too wide to provide adequate sun shielding if just used in place of the hood

Product features

STSEETOP Camera Lens Hood

• This hood main function is to avoid reflection when photographing & shooting through glass / windows.Once used in reverse, it can add a simple waterproof splash protection for the camera and avoid damage caused by spray, snow, dirt, sand and gravel.
• When you're shooting through a hotel window, a skyscraper observation deck, the window of a bus or a zoo enclosure, removing glare by day and reflections by night, can be used any time you need it. Lightweight and portable, easy to carry and use.

Quickly detaching and mounting. Normal mode and reverse mode for using.

• Quickly detaching and mounting. Normal mode and reverse mode for using.

Product description

Product Description



Package Includes: 1 x 58mm Hard Lens Hood. 1 x 58mm Soft Rubber Lens Hood. 1 x 58mm UV Filte.



Please note that EEEKit and Amazon.com are the only sellers on Amazon that are authorized to sell products with the EEEKit name. Buy from sellers EEEKit or Amazon.com to ensure authenticity and better service.



Product Specification:



Rubber lens hoods provide extra protection from accidental bumps or scratches thanks to high quality shock absorbent rubber

Professional tulip shape design (also known as flower or petal shape) allows for greater versatility. Perfect for standard or zoom lenses

UV filter absorbs the Ultraviolet rays of the sun thereby reducing or eliminating distortion

• 58mm Lens Hood Kit Includes a 58mm hard lens hood and 58mm soft lens hood
• They both fits on all Canon lenses and cameras with a 58mm Lens Thread
• The hard lens hood prevents image-degrading lens flare by blocking stray light from striking the surface of the lens
• The rubber lens hood can be folded out in 3 steps to offer different levels of sun shading. Perfect for wide-angle, standard, telephoto zoom/non-zoom lenses
• 58mm UV filter serves to protect your lens from all dust, dirt, scratches and fingerprints. It also absorbs the Ultraviolet rays of the sun thereby reducing or eliminating distortion

Product description

Compatibility

It is compatible with Canon EF 24-70mm f/2.8L USM lens

Replaces Canon EW-83F lens hood



Specification

Material: ABS Plastic

Net Weight: 2 ounce

Gross Weight: 3.4 ounce

Size: 4.3*4.3*3.3 inches

Packaging Type: Carton



Product Highlights

1. Blocks stray light from entering the lens

2. Reversible for compact storage

3. Not impact the use of filters and lens caps

4. Non-glare matte finish prevents reflections

5. No vignetting would show with the hood on

6. Extra protection from accidental impact



Package Including

1. Lens Hood x1



Warranty

1-year 100% Satisfaction Guarantee



Note* This is lens is not compatibale with Canon EF 24-70mm f/2.8 L II USM Lens

• [Note!]: This lens hood only can fit Canon EF 24-70mm f/2.8L USM, but not work with Canon EF 24-70mm f/2.8L II USM lens, so please make sure the model mark in front of your lens before purchasing
• Reversible: Can be placed backwards over the lens for easy storage. It allows you to put on a filter and a lens cap
• Unique Design: Features a non-glare matte finish on the interior surface to further limit lens flare so no vignetting will show with the hood on
• Improvement: To prevents stray light from the lens by extending and shading the end of the lens, improving your contrast and image quality
• Protection: With the extended lens end, it can protect your lens from moisture, wind-blown debris and accidental impact

User questions & answers

Question:	Can this be stored on the lens like the original lens hood
Answer:	Yes, the lens hood is used to replace Canon EW-83F hood, so it can be mounted to the Canon EF 24-70mm f/2.8L USM lens like the original one.
Question:	Will this fit on a canon eos 6d mark 2 camera
Answer:	It fits on my earlier version 24-70mm lens. It depends on the lens and will work with any camera the lens is compatible with.
Question:	Would this fit a Tamron 24-70 for Canon
Answer:	I don’t believe so. The tamron 24-70 has its own lens hood. I believe this will only fit the Canon 24-70 2.8L
Question:	This does not fit my canon 24-70 f/2.8 lens at all.......am I missing somthing or how to put it on my lens
Answer:	Hi, please make sure if your flash is Canon 24-70mm f/2.8L or 24-70mm f/2.8L II. This lens hood is specially designed for Canon 24-70mm f/2.8L, not for "II". Thank you!

Product description

Introducing - The Universal Lens Hood - The ONLY collapsible, anti-reflection lens hood that's easy to pack, install & use. Fits 99% of lenses. Holds 99% of circular filters, & actually enhances workflow. Truly a universal, durable and multi-functional product backed by a lifetime warranty from the company that has set out to keeping your photography gear KUVRD (pronounced 'covered').

• PACKABLE - The only lens hood that's easy to pack, easier to install and funner to use. It’s foldable and collapses like an accordion, making it easy to pack and store anywhere... be it your bag, your backpack, even your pocket. You name it.
• EASY TO USE + MAXIMUM SECURITY - When in installed, it’ll securely grip your lens, never falling off or getting lost. Expand it forwards to block out flares. Fold it backwards to protect against the elements. Adapt your gear on the go without interruption to your workflow. Withstands years of heavy use without issue & backed by a Lifetime Replacement Warranty.
• VERSATILE - Easily stretching and fitting over 54mm-76mm lenses, it makes it convenient to use with all your lenses while freeing up space in your bag. The S|54 fits all your smaller camera lenses, perfect for micro 4/3 lenses, mirrorless camera lenses, vintage lenses, smaller range finder lenses and SLR lenses while also working with holding 99% of circular filters, adapting to your workflow without wasting time or restricting your gear.
• ANTI-GLARE | ANTI-REFLECTION - Whether shooting through glass and windows or any transparent concave surface, it completely removes reflections and glares, making it easy to shoot with no distractions.
• PLEASE NOTE: VIGNETTING WILL BEGIN TO OCCUR with ultra-wide lenses and fisheye lenses that have focal length ranges >20mm. e.g. when a lens like a Canon EF 11-24mm f/4L USM Lens is completely zoomed out, the user will begin to see vignetting occur in the corners of the frame between 11mm-20mm.

User questions & answers

Question:

Will this universal lens hood fit my Sigma 150-600mm sport 105mm filter size? The metal it comes with makes it extremely heavy

Answer:

With that particular lens, it is achievable to stretch and fit the ULH(M) size lens hood up and over the Sigma 150-600mm 105mm filter thread diameter... however it'll take a lot of effort... both to install it and remove it from that behemoth of a lens... granted KUVRD's lens hood is MUCH lighter in weight and MUCH more compact/packable than that lens' massive lens hood... and we would encourage you to order the MEDIUM size, but really only feel comfortable doing so if you ALSO had multiple lenses within the filter thread range of 72mm to 92mm and your intent was to use them on those lenses and then also on your Sigma 150-600mm... However if it is only to be used with that Super Telephoto lens then I, as the founder of KUVRD and designer of our lens hood, would NOT feel comfortable persuading you to order our MEDIUM size lens hood because I feel that the amount of effort it will take to install onto and/or remove from that lens outweighs the benefits of our lens hood as a product if not intended to be used on other lenses or merely to lighten your load from not having to travel with the lens hood that comes with the Sigma 150-600mm lens... Again, our lens hood WORKS on that lens, it just takes a ton of effort in getting it onto that filter thread and I don't think it's worth it at that point.

Product features

FOLDABLE & PACKABLE

Packs flat to fit into any space and collapses to work with any focal length lens, meaning no more dark spots or vignetting in the corners of the frame.

ANTI-GLARE

Flexible enough to fully enclose on transparent surfaces, to completely remove reflection and glare when shooting through windows and glass.

COMPATIBLE WITH ANY FILTER

Enhance your photo using any sized circular filter with any sized lens and still have the added protection against the elements.

QUALITY CONSTRUCTION

Sturdy enough to hold its shape and remain in place, even in windy environments. Durable, easy to clean, and treated with our Lint Resistant Coating.

Product description

Compatibility

The lens hood shade is compatible with

Canon EF 75-300mm f/4-5.6 III

Canon EF 75-300mm f/4-5.6 III USM

Canon EF-S 55-250mm f/4-5.6 IS

Canon EF-S 55-250mm f/4-5.6 IS II lens

Replaces Canon ET-60 lens hood



Specification

Material: ABS Plastic

Gross Weight: 1.7 ounce

Size: 3.2*2.4*2.2 inches

Packaging Type: Carton



Product Highlights

1. Blocks stray light from entering the lens

2. Reversible for compact storage

3. Not impact the use of filter and lens cap

4. Non-glare matte finish prevents reflections

5. No vignetting would show with the hood on

6. Protection from impact



Warranty

1-year 100% Satisfaction Guarantee

• Compatibility: The lens hood for Canon EF 75-300mm f/4-5.6 III, EF 75-300mm f/4-5.6 III USM, EF-S 55-250mm f/4-5.6 IS, EF-S 55-250mm f/4-5.6 IS II lens replaces Canon ET-60 hood
• Flexibility: Reverse attaching to the lens saves storage space. And it allows you to put on a filter and a lens cap
• Professional Design: A non-glare matte finish on the interior surface to further limit lens flare so no vignetting will show with the hood on
• Improvement: To prevent stray light from entering the lens, improving your contrast and image quality
• Protection: With the extended lens end, it can protect the lens from moisture, wind-blown debris & impact

User questions & answers

Question:	Does this fit the canon 75-300mm 4-5.6 iii? I read a few reviews that said it does not
Answer:	Hi, the hood is fit for Canon EF 75-300mm f/4-5.6 III USM, please make sure "USM" marded there. Thnak you!
Question:	How does this attach to lens
Answer:	There are a small protruding ears (aka bayonet mount) on the end of all lens to attach different types of accessories such as lens hoods.
Question:	Will this fir canon ef 75-200 mm lens
Answer:	I use it with my Cannon 75 - 300mm fits fine. so i would assume it would. as it seems their is a standard exterior size on cannon lens but you may want to contact JJC directly to be sure.
Question:	Does this fit efs 55-250mm f/4.0-5.0 isii
Answer:	Sorry, it can fit Canon EF-S 55-250mm f/4-5.6 is II, but not for efs 55-250mm f/4.0-5.0 is II

• Prevents lens flare caused by extraneous light and protects against unexpected bumps or shock.
• 3-in-1 design for use with wide-angle, standard, telephoto zoom/non-zoom lenses.
• Lens Compatibilities: Popular 58MM Lens models include EF-S 18-55mm f/3.5-5.6 IS II, EF-S 55-250mm f/4-5.6 IS II, EF 50mm f/1.4 USM, EF 75-300mm f/4-5.6 III USM.
• Camera Models: CANON Rebel (T6i T6 T6s T5i T5 T4i T3i T2i T1i XT XTi XSi), CANON EOS (750D 760D 650D 600D 550D 500D 450D 400D 350D 300D 7D 60D) and more.
• Backed with Digital Goja 90-Day 100% Satisfaction Guarantee.

User questions & answers

Question:	Does this fit the stock T1i lens? What If I'm using a UV filter? My old rubber lens hood fell apart - how does this one hold up? Is this true black
Answer:	If your stock filter has a 58MM diameter it will screw into it; if not 58MM you need to order the correct diameter measurement, e.g. 62MM/77MM etc. Same applies to the diameter of your UV filter. The lens hood appears to be quite durable and it is indeed dark black.
Question:	This works in a Canon SX
Answer:	Yes, it may fit but check inside your lens
Question:	What is the size for Sigma 30mm f/1.4 DC
Answer:	on the lens what size does it say?
Question:	Will this hood cause a shadow when using flash
Answer:	Don't often use my flash, but this is a question that needs an answer for an occasion when I do. I dragged the camera out for a quick test and found that the answer is "yes and no".All depends on the placement of your flash and the power of your lens.I am using a Sony HX400v, which is basically a hefty point-and-shoot. (All I want is snapshots, but finally got tired of not having a viewfinder).Anyway, the camera has a built-in flash perched just above the lens, which is a 24-1200mm zoom. If I zoom in to the 35mm equiv of a 50mm (1:1) Lens, I have no shadow. If I Set the lens to the 35mm equiv of 24mm, I have a shadow in the lower 1/3 of the photo, whether the hood is collapsed or not. Actually, at 24mm I can get the shadow down to a sliver at the bottom of the photo by "extending" the hood backwards toward the camera body.Naturally, if you are using a flash attachment, I am sure it would raise the flash high enough, even for 24mm.Hope this helps.

Product features

Altura Photo 3-in-1 Collapsible Rubber Lens Hood Shade for Camera Lenses

The Altura Photo Collapsible Rubber Lens Hood is going to dramatically improve the quality of your photos. The collapsible hood eliminates flare caused by stray light, and protects lenses from unexpected bumps. It’ll be a perfect fit on zoom, telephoto, standard, and wide-angle lenses.



Features

- Guards lens from bright extraneous light for improved image quality.

- 3-in-1 Collapsible design:

   ·   Retracts completely for use with wide angle lenses and storage.

   ·   Extends midway for use with standard lenses.

   ·   Extends fully for use with telephoto lenses.

- Sturdy rubber built protects against bumps and abrasions.

- Internal mounting threads allow for filters and lens caps while in use.

Product description

55mm + 58mm Lens Hood Set, Collapsible Rubber Lens Hood with Filter Thread + Reversible Tulip Flower Lens Hood + Center Pinch Lens Cap + Microfiber Lens Cleaning Cloth

Package Contains:

- 55MM Reversible Tulip Flower Lens Hood x 1pcs;

- 55MM Collapsible rubber lens hood x 1pcs;

- 55MM Center Pinch Lens Cap x 1set;

- 58MM Reversible Tulip Flower Lens Hood x 1pcs;

- 58MM Collapsible rubber lens hood x 1pcs;

- 58MM Center Pinch Lens Cap x 1set;

- Premium Microfiber Cleaning Cloth x 2pcs;

55MM LENS HOOD SET COMPATIBLE With:

-Nikon D3400 D3500 D5300 D5500 D5600 D7500 w/ AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR (NOT FOR Nikon AF-S DX 18-55mm f/3.5-5.6G VR, Canon EF-S 18-55mm f/3.5-5.6)

-Sony Alpha Series (A99, A77, A58, A57, A65, A55, A 390, A100, A33, A900, A850, A700, A500 A330, A300 A230, A200) DSLR cameras with 18-55mm, 75-300mm f/4.5-5.6, 50mm f/1.4 lenses

-Other 55mm camera lens.

58MM LENS HOOD SET COMPATIBLE With:

-CANON Rebel (T6i T6 T5i T5 T4i T3i T3 T2i T1i XT XTi XSi SL1), CANON EOS (700D 650D 600D 550D 500D 450D 400D 350D 300D 1100D 1000D 100D 60D) with 58MM Lens wich include: EF-S 18-55mm f/3.5-5.6 IS II , EF-S 55-250mm f/4-5.6 IS II , EF 50mm f/1.4 USM , EF 75-300mm f/4-5.6 III USM.

-Nikon D3400 D3500 D5300 D5500 D5600 D7500 AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED, AF-S DX NIKKOR 55-300mm f/4.5-5.6G ED, 35mm f/1.8G ED, 50mm f/1.4G, 50mm f/1.8G

-Other 58MM lens

• ULTIMATE LENS HOOD SET YOU NEED, Set includes: 55mm+58mm Reversible Tulip Flower lens hood, 55mm+58mm 3 Stages Collapsible Rubber Lens Hood, 55mm+58mm Center Pinch Lens Cap, Premium Microfiber Lens Cleaning Cloth.
• COLLAPSIBLE RUBBER LENS HOOD: 3-in-1 design for use with wide-angle, standard, telephoto zoom/non-zoom lenses. Prevents lens flare caused by extraneous light and protects against unexpected bumps or shock.
• REVERSIBLE TULIP FLOWER LENS HOOD: Unique design for quickly detaching and mounting. Normal mode and reverse mode for using. The only flower lens hood on the market that lets you use a lens cap while having the lens hood mounted.
• PAIR WITH FILTER: Our lens hood are provided with Filter Thread, allowing you to pair this hood with filter and lens cap.
• Center Pinch Lens Cap :Never lost our lens cap again. Simply use the elastic loop over the camera lens so it's easy to find. And cap leash is attached to lens cap via the hole in it, Never lost our lens cap again.

User questions & answers

Question:	Does this fit the Nikon D
Answer:	Hi, it's up to your lens, if your lens is AF-P DX NIKKOR 18-55mm and AF-P DX NIKKOR 70-300mm, yes, this 55mm and 58mm lens hood set will fit them. Thank you.
Question:	Can someone explain when to use each type of hood—-what is the difference? Can I use these indoors or will they cut out too much light
Answer:	I use them to take photos of my art. The hood size corresponds to lens size. Depends on lighting as to how beneficial or not they will be to you. I take with & without & in different settings & see what photo looks the best
Question:	How does this attach to the lens? Do you thread it on the lens like a filter
Answer:	You screw the ring onto your lens then the hood snaps onto the rain.
Question:	Does this fit to nikon d7500 lenses
Answer:	Hi, If your lens is Nikon AF-S 18-140mm f/3.5-5.6G or 18-300mm f/3.5-6.3G ED VR, please choose 67mm lens hood set from our shop, link: www.amazon.com/dp/B075DWTCWX. If your lens is AF-P DX NIKKOR 18-55mm and AF-P DX NIKKOR 70-300mm, this 55mm +58mm lens hood wii fit then perfect. Need more help, please send message to us, email address [email protected]. Thank you.

• READ BEFORE BUY: Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always proceeded by a "Φ" (diameter) symbol. For example: Φ58 = 58mm lens thread size.
• Set contains 1pcs reversible tulip lens hood + 1pcs our unique design center pinch lens cap with cap keeper leash + 1pcs premium 6"x7" microfiber lens cleaning cloth.
• The reversible tulip lens hood uses innovative metal ball clip mounting instead of traditional screw mounting, much more easily and quickly for mounting and detaching.
• Made of premium hard plastic, this petal tulip lens hood is must have camera accessory to protect your expensive lens from accidental bumps or scratches.
• Rotate the hood in either direction to prevent flares when shooting. Reverse the lens hood while not shooting for a compact storage in your camera bag. With interior thread design, you can mount lens cap or filters on it. Backed with waka's 24 months 100% Satisfaction Guarantee warranty.

User questions & answers

Question:	Will the tulip hood produce a vignette on a Nikon 24-140mm lens at 24mm focal length? Thanks
Answer:	Hello, it does not produce a vignette effect under “normal” conditions. the lens hood may cause slight vignetting on 18-55 lens when zoomed out to the widest angle. This occurs with all universal hoods on the 18-55 at the widest angle.
Question:	Why does it say (not for 18-55mm lens) for the 55mm size? i have a nikon 18-55 lens with a diameter of 55mm. shouldn't i get the 55mm
Answer:	My hunch is because on the wide end of the zoom range it may block part of the image. I use it on an 18-140mm zoom and while it doesn't block the image when shooting at 18mm (but I don't have a full-frame censor, so it's really a 27mm equivalent), it does block the built-in flash from illuminating the top part of the image.
Question:	I want a tulip hood for a 58mm canon eos 18-55mm lens. will this hood cause vignetting when set to 18mm
Answer:	I do not get vignetting when using it on my 18-135mm lens, so I would say no.
Question:	I have Nikon d3300,just want to know what size fit on it ,my lens size is 18-55mm
Answer:	For Nikon 18-55mm lens please choose 52mm size, thanks.

Product features

waka 3 Pack Tulip Lens Hood Set - A Complete Camera Lens Accessories Bundle for Your Need.

Tulip Lens Hood:

- Reversible tulip lens hood uses innovative metal ball clip mounting instead of traditional screw mounting, much more easily and quickly for mounting and detaching.

- Made of premium hard plastic, this petal tulip lens hood is must have camera accessory to protect your expensive lens from accidental bumps or scratches.

- Lens hood is great to help preventing flares when shooting. Professional tulip shape design (aka flower or petal shape) allows for greater versatility. Just rotate the lens hood to different angles to prevent flares in different zoom lens. Perfect for standard or zoom lenses.

- Reverse the lens hood while not shooting for a compact storage in your camera bag.

- With interior thread design, you can mount lens cap or filters on it.

Useful Addition:

- waka center pinch lens cap with cap keeper leash, the only lens cap that offer premium quality and protection as original manufactory while solved the easily losses problem using our unique design cap keeper leash.

- waka premium 6"x7" microfiber cleaning cloth, made of extremely fine microfiber leaves zero scratches, streaks or marks. Safe for all lenses.

waka Reversible Flower Lens Hood Set for Canon Nikon Sony etc DSLR Cameras

Compatibility:

Canon Rebel T7 T7i T6i T6 T6s T5i T5 T4i T3i SL3 SL2 SL1, Canon EOS 80D 77D 700D 650D 600D 550D and Nikon Sony Pentax Olympus etc SLR/DSLR cameras.

Package Contains:

- Reversible Tulip Flower Lens Hood x 1pcs;

- Center Pinch Lens Cap with Cap Keeper Leash x 1set;

- 6″x7″ (15cm x 18cm) Premium Microfiber Cleaning Cloth x 1pcs;

How to choose the correct thread size for your lens?

IMPORTANT: Read this before buy!

Your lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap.

You can find your lens thread size on your camera lens front or side following by symbol 'Ø' to choose the CORRECT SIZE.

For example: 'Ø'58mm=58mm lens thread size.

Product description

Compatibility

for Canon EF-S 18-55mm f/3.5-5.6 IS STM lens

for Canon EF-S 18-55mm f/4-5.6 IS STM lens



Specification

Material: ABS Plastic

Item Size: 3.2x3.2x1.2 inches

Net Weight: 0.5 ounces

Gross Weight: 1.1 ounces

Color: Black or White



Warranty

1-Year 100% Satisfaction Guarantee



The camera is excluded

• Compatibility: The bayonet lens hood is designed for Canon EF-S 18-55mm f/3.5-5.6 IS STM & EF-S 18-55mm f/4-5.6 IS STM lens, fits for T8i, T7i, T6i, T5i, SL3, SL2, SL1, 90D, 80D, 77D, 70D, DSLR camera
• Replacement: To replace Canon EW-63C hood
• Flexibility: Allows you to put on a Ф58mm filter and lens cap
• Convenience: Can be placed backwards over the lens for more compact storage
• Protection: To protect the lens from impact, and prevent unwanted stray light from entering the lens. The non-glare matte finish inside prevents reflection. No vignetting will show

User questions & answers

Question:	Does this not rotate a bit each time the camera refocuses? The incised corners of the tulip shape will almost never be properly orientated
Answer:	Yes, you are correct. Whenever you are going to shoot at the 18mm setting, you must check the position of the shade so you can avoid the corners of the picture from being blacked out. It is a bit of a pain, but makes up for it when you do have a nasty reflection on the lens. For the cost, I still think it is worth the purchase.
Question:	Will this fit a EF 85mm f1/8 lens medium telephoto
Answer:	The website says: "Compatibility: The bayonet lens hood is designed for Canon EF-S 18-55mm f/3.5-5.6 IS STM & EF-S 18-55mm f/4-5.6 IS STM lens, fits for T8i, T7i, T6i, T5i, SL3, SL2, SL1, 90D, 80D, 77D, 70D, DSLR camera" Since it is not in that list, I think there is a significant likelihood it does not fit. If I look up that lens the picture does not show the three point latch system for this lens hood. I think Canon ET65III Lens Hood for Canon SLR Lens is closer to what you want. There is also one from Altura.
Question:	Will it fit canon eos 2000d/t
Answer:	Hi, this lens is designed for lens EF-S 18-55mm f/3.5-5.6 is STM and EF-S 18-55mm f/4-5.6 is STM not for specific camera, so please make sure your lens model.
Question:	Will it work for Nikon? I'm looking for the application on 10-100 55mm lens
Answer:	If it's the same size as the 18 to 55mm for the canon, then it should work

Product description

Professional Tulip Lens Hood is primarily designed to prevent unwanted stray light (flare) from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. Screw-mount lens hoods, such as this 55mm, are designed to screw right into your lens or filter. Rear locking ring allows the user to rotate the hood in 360°direction.



Why should you use lens hoods?

Essentially, a lens hood acts to block out light that the lens shouldn’t be receiving, which can contribute to aberrations such as flare, particularly when shooting towards the light. Wide angle lenses, due to their expanded field of view, are naturally prone to gathering stray light, though the reduced field of view on standard and telephoto lenses means that for accuracy, the use of lens hoods is just as important.

• Fits all 55mm and 58mm lenses
• The addition of a lens hood can help prevent flares-those circles of light that can accompany images where a strong light source is just outside the frame
• Professional tulip shape design (also known as 'flower' or 'petal' shape) allows for greater versatility
• Protects Lens from Accidental Impact
• Easy to use screw mount lens hood screws right onto your lens or filter.

User questions & answers

Question:	Bought this for my nikon d7500 with nikon 18-55mm f/3.5-5.6g vr af-p. hood shape is taken at zoom 18-24 distance. is this not fit to d
Answer:	The size of the hood is taken from the diameter of the lens, not focal length. Diameter should be printed on the lens at the end farthest from the camera, looking into the lens.
Question:	Does this fit for 75-300 nikon lens?? I have 18-55mm and 75-300mm lens for Nikon D
Answer:	It fits my Nikon 75-300 lens. Buy it. If it doesn't work, return it.
Question:	can you use a uv or polarizer filter with these lens hoods on
Answer:	Yes. You can attach the filter to the lens and then you can attach the hood to the filters.
Question:	What is the purpose of these? What do you do with them
Answer:	1 they protect the lens from being scratched. 2 they shade the lens, helping to reduce reflections from bright lights including the sun.