14 best soled speaker stands

• Heavy-duty all-steel speaker stand
• All four support piers can be filled with sand or steel shot
• Adjustable carpet-piercing bottom spikes
• Four soft rubberized top pads supplied for speaker isolation
• Compatible with a wide range of compact or monitor-type speakers

User questions & answers

Question:	How much does each 28" stand weigh
Answer:	Shipping weight for the set is quoted at 59.8 lbs. that would put each stand at about 29 lbs less a pound or so for packaging materials. I used approximately 70 lbs of play sand to fill mine to control resonance, so you’ll want to consider the weight of whatever media you’re filling them with as well.
Question:	For anyone who owns Klipsch The Sixes, was their complicated footprint a problem with them perched on top of these stands
Answer:	I have those and they do sit on the stand fine. The stand Pangea stand is about a 1/4 inch to long to fit in the gap under the foot of The Sixes. But I have them up on their without much problem. They angle up just a little so make sure you get a stand that isn't too tall.
Question:	whats the top plates dimensions
Answer:	Top plates 6X7 inch small .
Question:	Are these stand sturdy enough to support a pair of legacy audio studio speakers? they weigh a little over 30lbs each
Answer:	My speakers are size HxWxD = 28" x 11" x 16" and weigh 55lbs each. I filled both speaker stands with play sand and they sit on a carpeted floor with no problems for over six months.

Product features

Pangea Audio DS400 Speaker Stand

Your speakers may be capable of far better sound than you're getting now. Research shows that loudspeakers sound best when their tweeter is positioned at or slightly above the ear of the listener. A high quality steel speaker stand like the Pangea Audio DS400 not only positions the speaker drivers at the best acoustic height, but it also rigidly holds the speaker for optimal bass performance.

The DS400 uses ultra-strong support piers to provide an incredibly solid and rigid base for compact monitors and other bookshelf-type speakers. As always, Pangea provides huge amount of performance. You’ll have to pay a whole lot more to get a stand that rivals the DS400’s combination of build quality and performance-enhancing features.

• Heavy-duty all-steel speaker stand
• Four rectangular support piers
• All four support piers can be filled with sand or steel shot
• 6" by 8.5" steel top plate
• Extra heavy duty 9.75" by 12" bottom plate
• Heavy-duty, large-diameter solid metal bolts rigidly couple the support columns to the base
• Adjustable carpet-piercing bottom spikes
• Four soft rubberized top pads supplied for speaker isolation
• Compatible with a wide range of compact or monitor-type speakers
• Maximum Recommended Speaker Weight: 120 lbs/55 kg (each)

Smart Products with Strong American-Based Support

Speaker Vibration 'Energy' is a Problem

Powerful Support for Your Sound

Sand-fillable Support Piers



The Pangea DS400 goes the extra mile in speaker 'energy' control for the clearest, cleanest possible sound quality. All four support piers can be filled with sand or steel shot for even better vibration damping.



Super-strong Steel Top and Bottom Plates



The Pangea Audio DS400 features a 6" wide by 8.5" deep steel top plate to match a wide range of compact or monitor-type speakers. It also has an extra heavy duty, 3mm-thick, 9.75" by 12" bottom plate. These steel plates contribute to the strength of this rigid stand.

Product description

Heavy Duty Universal Bracket Mounts Large to Small Speakers Directly onto Walls - Mounts Permanently and Securely - Standard 1 3/8" insert fits most speaker cabinets - Made of Solid Formed Steel for Structural Integrity - Distance From Wall Extends to 12.5" - Tilt Angle Adjustment: 90 Degree- 30 Degree - Swivel Angle Adjustment: ±30 Degree Weight Capacity: 80 lbs. - Added solid-steel pin serves as a safety-stop

• 90°-30° TILT ANGLE ADJUSTMENT: Pyle dual adjustable wall mount speakers are 90°-30° angle adjustable. It is secured with a solid-steel pin that serves as safety-stop and effectively elevates speakers for optimum sound performance
• DURABLE, RUGGED AND RELIABLE: An ideal heavy-duty audio holder for loud music, PA speakers, studio monitor with rugged, durable and reliable metal for long-term use
• 12.5'' ARM DISTANCE: It features 12.5'' inches long arm distance from the wall with 5.25"W X 9.9"H base measurement. It safely hangs speakers on flat wall surfaces without having them touch or vibrate from the wall
• SOLID STEEL PIN: The product features a solid-steel pin for secure placement of a speaker attached to the bracket stand holder. It supports the weight of the speaker up to 80 lbs. and prevents it from collapsing
• BRACKET STAND HOLDERS: Pyle universal speaker holder is a heavy-duty reinforced solid formed steel construction. It mounts permanently and securely in most environments
• Durable, Rugged & Reliable - Safely Hangs Speakers on Flat Wall Surfaces - Sold as Pair
• Includes Universal Speaker Bracket Wall Mounts - Heavy Duty Reinforced Solid Formed Steel

User questions & answers

Question:	Will this work with PylePro 8" 600 watt speaker
Answer:	6 months
Question:	What is the dimensions of the mounting plate
Answer:	I felt No delay and the range is good.
Question:	The mounting rod inserts into the speaker. What prevents the speaker from rotating on the rod? (none of my speakers have such holes
Answer:	The maximum distance this product can work for is 98’
Question:	WHAT is the width and depth of the insert tube
Answer:	I tried running a blue snowball off the usb input and couldn’t seem to get it to work. It is entirely possible I’m just stupid but it was no dice for me.

Product features

Dual Universal Adjustable Wall Mount Speaker

These versatile wall mount brackets allow you angle, tilt and rotate your speakers once installed. Hang your speakers in a convenient location and to create a more acoustically favorable environment. Mount them at home, in the office or in the studio; perfect for all audio applications. Enjoy safe, durable and reliable speaker positioning and hang them up.

Arm Distance

It features 12.5'' inches long arm distance from the wall with 5.25"W X 9.9"H base measurement. It safely hangs speakers on flat wall surfaces without having them touch or vibrate from the wall

Tilt Angle

Adjustable wall mount speakers are 90°-30° angle adjustable. It is secured with a solid-steel pin that serves as safety-stop and effectively elevates speakers for optimum sound performance

Rotate

An ideal heavy-duty audio holder for loud music, PA speakers, studio monitor with rugged, durable and reliable metal for long-term use. It supports the weight of the speaker up to 80 lbs. and prevents it from collapsing

Base Bracket

Heavy-duty reinforced solid formed steel construction. It mounts permanently and securely in most environments

• IMPROVED SOUND - S4 speakers stands let you get the most out of your speakers by tilting them 16° toward your ears, ensuring you never miss out on those higher frequencies. Foam padding on the top and bottom of each stand also helps to maintain stability and reduce undesirable resonance.
• MOUNTING HOLE - Further improve stability by securing YU4 or other compatible speakers in place with the provided 1/4”-20 screw.
• MINIMALISTIC DESIGN - Using as little material as necessary, S4’s low-profile design keeps your desktop looking clean.
• SOLID METAL CONSTRUCTION - Choose between a variety of durable metals and alloys to fit your style.
• THE PERFECT COMPANION - S4 stands measure 5.5'' wide by 7.9'' deep and are capable of holding 8 lb each. Use them with Kanto's YU4 Powered Speakers or similarly sized speakers.

User questions & answers

Question:	How big of a speaker can these suport
Answer:	It holds up my 5” Mackie MR524 which is 10 pounds
Question:	My speakers are 8.25" x 6.5". Will this stands work with them
Answer:	It holds up my 5” Mackie MR524 which is 8.7” x 7.1”
Question:	Can you tell me the area of the Kanto S4 Stand where the speaker sits
Answer:	Roughly 140 mm wide, 198 mm deep.
Question:	What's the maximum speaker weight that this stand will support
Answer:	It holds up my 5” Mackie MR524 which is 10 pounds

Product features

IMPROVED SOUND

S4 speakers stands let you get the most out of your speakers by tilting them 16° toward your ears, ensuring you never miss out on those higher frequencies. Foam padding on the top and bottom of each stand also helps to maintain stability and reduce undesirable resonance.

MOUNTING HOLE

Further improve stability by securing YU4 or other compatible speakers in place with the provided 1/4”-20 screw.

MINIMALISTIC DESIGN

Using as little material as necessary, S4’s low-profile design keeps your desktop looking clean.

SOLID METAL CONSTRUCTION

Choose between a variety of durable metals and alloys to fit your style.

THE PERFECT COMPANION

S4 stands measure 5.5'' wide by 7.9'' deep and are capable of holding 8 lb each. Use them with Kanto's YU4 Powered Speakers or similarly sized speakers.

• Low profile design for desktop speakers, ideal for YU2s
• 16 degrees of vertical tilt
• Built out of solid aluminum with a painted finish
• Foam isolation pads to reduce vibration
• Measures 3.9'' wide by 5.3'' long and holds up to 6 lb per stand

User questions & answers

Question:	Could these fit the edifier r1280? or would the kanton s4 be better
Answer:	The R1280T is too large for the S2, they would work well on the S4. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
Question:	can this fit 4 inch speakers
Answer:	absolutely...my 4 inch Audioengine a2s are sitting on them right now
Question:	Will these fit Adam T5's
Answer:	The Adam T5V are much too large for the S2's and will also be too for our largest desktop speaker stand. Please email Kanto Customer support if you have any other questions and we'll be happy to help.
Question:	Does this item come as a pair or is each stand sold seperately
Answer:	They are sold as a pair.

Product features

IMPROVED SOUND

S2 speakers stands let you get the most out of your speakers by tilting them 16° toward your ears, ensuring you never miss out on those higher frequencies.

REDUCED VIBRATION

Foam padding on the top and bottom of each stand helps to maintain stability and reduce undesirable resonance.

MINIMALISTIC DESIGN

Using as little material as necessary, S2’s low-profile design keeps your desktop looking clean.

SOLID METAL CONSTRUCTION

Choose between a variety of durable metals and alloys to fit your style.

THE PERFECT COMPANION

S2 stands measure 3.9'' wide by 5.9'' deep and are capable of holding 6 lb each. Use them with YU2 Powered Desktop Speakers or similarly sized speakers.

Product description

Fits most bookshelf speakers up to 25 lbs. Ask and you shall receive! You wanted a bigger top plate? Here it is, in all its 6" x 6" glory. Paired with a strong n' sturdy, solid MDF post, these stands are ready to take on your large bookshelf speakers weighing up to 25 lbs: Edifer, Polk Audio, Sony, Klipsch, Micca, Jamo, KEF, Yamaha, Pioneer... the list goes on and on! Fit for Every Floor What is this? The Sisterhood of the Traveling Speaker Stand? Because these bad boys are ready to look awesome and stand tall on whatever kind of floor you're working with. Carpet? Perfect! We've included spikes for that. Hard flooring? It's all good! We've included plastic feet for that. (Sorry, we know you were looking for a good excuse to rip out that old shag carpet. But hey, it's... um... kinda' charming, right?) Makes Cables Disappear Magicians, keep your rabbits! Leave the cables to us. And then, we'll leave them to you and your bookshelf speaker because you'll have all the secrets you need to make them disappear inside of these stands. Built-in, cable-concealing channels run the entire length of your stand, going from speaker plate to base. Body Content (A+/Bottom of page - Amazon) Buzzkill! (But in a Good Way) Good vibrations? No. Just no. The Beach Boys lied. They don't exist. Not when it comes to your sound, anyway. Not when you've invested top dolla-dolla bills in those high-end bookshelf speakers! Featuring 28" tall, energy-absorbing MDF posts, 6" x 6" top plates + rubber isolation pads, these stands were designed specifically to veto the vibration. Buzzkill? Maybe. But when it comes to the quality of your audio, that's a title we'll wear proudly.

• If you bring the screwdriver, we'll bring everything else: We've included all the hardware you need to get these stands assembled in 15 minutes or less.
• Solid MDF post design and enlarged 6" x 6" speaker plates with rubber, vibration-reducing pads provide a stable surface for your large, premium bookshelf speakers weighing up to 25 lbs. You asked, we gave. Because we're givers like that, folks. (Psst: Want even more stability? We recommend using museum wax or a non-permanent adhesive like 3M Command Strips!)
• Carpet spikes or plastic feet? Trick question. We've included both! That way, these suckers will stand tall and sturdy on any kind of floor you choose. Plus, vibration-reducing, solid MDF post design kills the buzz. (But only the bad kind of buzz!)
• Oversized cable management channel conceals cables of just about any size. Traditional speaker wires? Check. Banana plugs? Double-check. Long story short, these bad boys got a whole lotta' room for routing.
• These 28" tall stands put the music where it matters. Er, podcasts. Or surround sound. Ok, whatever you're blastin', your speakers will sit at optimal height, meaning you'll never have to cope with lackluster listening ever again.

User questions & answers

Question:	Will this work with klipsch rp-500sa dolby atmos speakers
Answer:	I don’t know if this helps you, but these work great for our Klipsch rp-600m speakers
Question:	Are these speakers blue tooth compatable
Answer:	These are speaker stands, not speakers
Question:	Can these rotate 360 degrees while on stand
Answer:	There's nothing to rotate. It's a fixed stand. If you rotate the stand itself then yes you can rotate 360. Otherwise it's all stationary
Question:	Are there large enough for rp 600m
Answer:	Based on the information available on the Klipsch RP-600M speaker this speaker has a weight (16 lbs.) that is under the weight rating (25 lbs.) of this product meaning it would work from that standpoint but please note that the speaker plate on this product is 6-inch x 6-inch compared to the 7.95-inch x 11.85-inch speaker. If you have any additional questions on this Echogear product or would like to speak to an Echogear Pro about installation they are available 7-days a week and can be reached at 1-855-428-2490 or at helpmehelpyou @ echogear. com. Thanks, - Haydn @ ECHOGEAR

• Space-Saving: Sold as pair, sleek and low-profile style keeps your desktop looking clean and stylish; C-shaped design leaves your desk with lots of space to put items under the speakers
• Better Listening Experience: With 5° of upward tilt, the desktop stands can perfectly angle speakers to ear level, ensure you experience the full range of high fidelity of your speakers
• Solid Metal Construction: Precisely made from high-quality aluminium, the speakers stands are heavy-duty and stay sturdy on your desk
• Anti-vibration: Neatly fitted with non-slip, anti-vibration feet to maintain stability and reduce resonance and vibration, four spare anti-vibration silicon rubber pads included for bigger speakers
• Measures: Width: 5.12'', Height: 4.72'', Depth: 6.3'', works with most speakers, and all weight 15lb each, 4" reference speakers

User questions & answers

Question:	Good for Audioengine A
Answer:	Look at the deminsions of your speaker & this product & there is your answer.
Question:	Is there a weight capacity this will hold? My left speaker is 15.4lbs and the right is just shy of 10lbs
Answer:	The speaker stands can hold speaker weight 15.4lbs each. Thank you.
Question:	Will these support a park of Adam A7x’s
Answer:	I believe your speakers are too big for these stands, these are great stands but A7x's would not fit properly. Just look at the deminsions of your speakers & the base demision of these stands.
Question:	Will these hold the presonus eris e3.5-3.5" studio monitor
Answer:	Stageek Desktop Speaker Stand Measures: Depth: 16cm, Width: 13cm, Height: 12cm Works with most speakers, and all weight 6.8kg each, 4" reference speakers. The PreSonus Eris E3.5-3.5" studio monitor Measures: 16.26 x 14.22 x 21.08 cm Weight: 3.1 kg Stageek Desktop Speaker Stand can hold the presonus eris e3.5-3.5" studio monitor. Thank you.

Product features

Stageek PRO Desktop Speaker Stands

Stageek speaker stands are the perfect addition to your desktop speaker setup.

Desktop Organization

Space-Saving: Sleek and low-profile style keeps your desktop looking clean and stylish.

Universal Desktop Speaker Stand

Measures: Width: 5.12'', Height: 4.72'', Depth: 6.3''

Works with most speakers, and all weight 15lb each, 4" reference speakers.

Better Listening Experience

Stageek speakers stands let you get the most out of your speakers by raises your speakers 4.13" and tilting them 5° toward your ears, ensure you experience the full range of frequencies your speakers have to offer.

Solid Aluminum Construction

Precisely made from high-quality aluminium, the speakers stands are heavy-duty and stay sturdy on your desk.

Aluminum material can effectively Anti-vibration.

Space-Saving

C-shaped design leaves your desk with lots of space to put items under the speakers

4 spare anti-vibration silicon rubber pads included for bigger speakers.

• All steel design for the best sound. These satellite speaker stands are made of solid, energy-absorbing steel for serious stability & quality acoustics. And who doesn't love a good quality acoustic?
• Includes all the brackets & hardware needed to attach just about any small speaker up to 4 lbs. That includes Vizio, Sony, Bose, & more.
• Adjust speaker height up to 13" with no tools required. Just turn the collar to change height on-demand. Now your speakers will always be at the perfect height.
• Speaker wires can be routed directly through the stand for a slick, clean look. Cords won't fit? Don't worry, included cable management loops to secure thicker cords tight to the stand.
• After a quick 15 minute install, it's time to pick your feet: Rubber pads are perfect for eliminating vibration on hard floors. Metal spikes anchor into the carpet for added stability. Both are included for maximum placement flexibility.

User questions & answers

Question:	Will these work with damson s cube wireless speakers
Answer:	I don't know. I'm using these stands for Vizio surround sound speakers.
Question:	do they come with both carpet spikes and rubber , for hardwood floors
Answer:	The base stand is heavy that you will not need spikes and/or rubber.
Question:	Would this fit the Bose invisible
Answer:	Great question! Based on the information available for the Bose Invisible 300 surround sound speakers, those speakers require a Bose specific connector plate that is only compatible with Bose branded accessories. If you have any additional questions on this Echogear product or find that the Bose specific connector plate is not needed let one of our Echogear Pros know. They are available 7-days a week and can be reached at 855-428-2490 or at helpmehelpyou @ echogear. com. Thanks! - Philip @ Echogear
Question:	Does anyone know if this works for Roku TV speakers
Answer:	Yes it works with this speaker

Product features

Attach Whatever You've Got

Nothing is worse than buying something online and when it finally shows up, it doesn't work with your speakers. We made these speaker stands compatible with every major speaker brand to help ensure that won't happen. That includes Klipsch, Polk, Vizio, and more.

You Wanna Get High?

Adjust the speaker stand up or down 13" with no tools required. Get them to the perfect height for listening to some hot jams & rock out. Using them behind the couch for surround sound? Lower them when you're done for a sick disappearing act.

Make David Blaine Jealous

Speaking of magic tricks, use the built-in cable management channel to hide your speaker wire. Amaze friends & family of all ages without needing that Harry Potter wand you bought for 50 bucks. Save that for defending your home from intruders.

Product description

VIVO universal high gauge cold rolled steel speaker stands (2 stands) for satellite speakers, bookshelf speakers, and more. Designed to elevate your speakers and enhance audio sound, STAND-SP03B's sleek attractive appearance is perfect for any home theater system. The stands are supported by dual steel pillars and can carry weights up to 22 lbs each. Features include removable carpet spikes for a sturdy foundation, and a unique steel rolled base design. Total height from the floor to the top shelf measures 25". Top shelf measures 6.25” x 6.25” and the base measures 9.5” x 9.5”



Compatibility

Universal surround sound speaker stand system for satellite speakers, bookshelf speakers, and more

Built to hold weight up to 22lbs



Features

Two stands included

High gauge cold rolled steel speaker stands (2 stands included) in sleek matte black finish

Detachable carpet spikes for carpet placement

Removable padded feet for solid floor placement

• Compatibility - Universal surround sound speaker stand system for satellite speakers, bookshelf speakers, and more
• Dimensions - Floor to top shelf measures 25”. Top shelf measures 6.25” x 6.25” and the base measures 9.5” x 9.5”.
• Appearance - High gauge cold rolled steel speaker stands (2 stands included) in sleek matte black finish for low profile
• Carpet Spikes - Optional, easily attachable and detachable spikes for carpet placement
• Padded Feet - Optional, easily attachable and detachable padded feet for solid floor placement

User questions & answers

Question:	my speakers are 7 inches across will this stand work for me
Answer:	Hello, Thanks for checking! The top base measures 6.25" x 6.25", therefore this will unfortunately not work for your 7" speakers. Thank you,
Question:	will these stands accomodate Roku speakers
Answer:	Hi Peter, Thank you for your interest! Regarding your question about STAND-SP03B accommodating Raku speakers, yes, it will. Please let us know if you have further questions. Have a great day! VIVO Customer Support
Question:	will these hold krk 5s
Answer:	Yes, these stands will hold those speakers.Thank you!
Question:	Will these hold keff q100 with base of 7” x
Answer:	Thanks for checking! These stands will hold your speakers. The platforms are a few inches smaller than the speakers' 11" depth, so just be sure they're placed with the weight well balanced for best support. We also offer a larger set of speaker stands with 8" x 10" platforms if needed: https://www.amazon.com/dp/B01HDV13Z4 Thank you!

Product features

Steel Construction

Solidly constructed of cold rolled steel, each stand holds weight up to 22lbs. Total height from the floor to the top shelf measures 25". Top shelf measures 6.25” x 6.25” and the base measures 9.5” x 9.5”.

Anti-Vibration Spikes

Detachable top and base spikes help create minimal points of contact to reduce overall speaker vibration. Spikes are optional as you can leave them off if desired.

Balanced Base

High gauge cold rolled steel bottom 9.5” x 9.5” base provides optimal balance for speakers up to 22 pounds.

Padding

We provide additional padding to protect your speakers or flooring from scuffs and scratches.

Who are we?

At VIVO we are every bit consumers as we are engineers and creators. As a leading provider of desk and screen mounting solutions, we live for products that enhance and simplify everyday life whether at home or in the office.

Product description

Sanus systems BF-16B 16 -inch wood speaker stands (BF16B). a built-in concealed wire path hides speaker cables for a clean and organized appearance in any room.

• Concealed wire management. Force-fit floor spikes
• Includes a pair of stands ideal for medium-to-large bookshelf speakers up to 25 lbs.
• A solid, energy-absorbing MDF pillar supports a 7-inch by 7-inch top plate with neoprene speaker isolation pads for superior acoustic quality

User questions & answers

Question:	What is the height of the base
Answer:	The stand is 16" high.
Question:	Is it possible to cut down these stands? Is the riser hard wood that can be cut down and new screw holes drilled to mount the plates
Answer:	No these stands are short there is no need to cut them. They look y’all like in the advertising pictures but the are actually short. About a foot and a half high. You May can cut them but believe me they are already short
Question:	are the spikes on the base removable
Answer:	The spikes are not installed they come in a bag so if you want to use them you have to screw them in. I put my stand on carpet and I didn't use spikes.
Question:	What are the dimensions of the stand's top plate
Answer:	Dimensions of the top plate is 7" by 7". Yes, the stands will support 10" x 10" speakers, currently I have 11" x 12" large bookshelf speakers on my Sanus stands. HTH

Product description

The Sanus natural Series Nf36 is a 36-inch stand for small bookshelf speakers up to 25 lbs. Its black-lacquered MDF base includes adjustable carpet spikes and screw-in polyester feet for stability. A solid hardwood pillar supports a 6 by 6-inch top plate with adjustable-height brass studs and neoprene pads to provide superior isolation and resonance damping for speakers. A patented wire management channel conceals and protects cables. This product is sold as a pair.

• A patented wire management Channel conceals and protects cables. This product is sold as a pair.
• A solid hardwood pillar Supports a 6 by 6-inch top plate
• Adjustable-height brass studs and neoprene pads to provide superior isolation and resonance damping for speakers

User questions & answers

Question:	is this compatible with sonos 5 wich is diffrent than sonos play
Answer:	The speaker stand has a 6in x 6in flat pedestal on top. As long as your speakers have a flat bottom and aren't too large, they should work nicely. I am using them for my SVS bookshelf speakers that are 8 in x 10 in at the bottom.
Question:	My speakers are 11" deep, 11" high, 7"wide. will these work for me? My speakers are Mission
Answer:	Im sorry to have answered your question so late. These stands should work for your speakers. I have Paradigm Bookshelf that measure 13 inches tall 10 inches deep and 8 inches wide. They weigh around 15 lbs each. I have done some serious jamming through these speakers on the stands and they haven't moved at all. Nice edition to the room. I have enjoyed them and when sitting down on the furniture they are about head level so perfect for the surround sound effects. I hope this helps. Feel free to ask any other questions. Alan
Question:	I cannot tell from the description - assume price is per pair of stands, or is it each
Answer:	I received a pair of stands with two options for the floor. Metal pegs for carpeting, and rubber cushions for hard surfaces.
Question:	How do you secure speakers bigger than the 6x6 top plate to the stand
Answer:	When I used the stands it was with Polk RTi4 speakers that were larger than the top plate. The speakers were not secured to the stands. The stands have a small rubber pad on the top side of the top plate to keep the speakers from sliding if bumped. The base of the stands is much larger than the top plate which makes them stable. In my home, the stands were placed out of walking areas so they were not located where they might be bumped. I have two children and didn't have an issue with the speakers getting knocked over in the 2 years that I used them.

Product description

PERLESMITH height adjustable floor speaker stands



Sturdiness



Well-designed rear speaker stands position the speaker on a solid platform to achieve the best overall sound quality, especially the bass. Speakers placed on a shelf or table often cause the surface to vibrate or resonate, which distorts the bass. Solid speaker stands isolate the speaker's vibrations from the floor and allow you to hear only the bass from the speaker and not vibrations from a shelf, table, or floor.







Listening Height



It is important for proper speaker placement for excellent sound. PSSS2 speaker stand feature with the height adjustable function from 18.7”to 44.33”can let you more freedom to put them where they'll sound their best. Positioning them at the same distance from each other as they are from you creates a listening "sweet spot." This helps give you an authentic sense of the stage or studio where the band is playing. It also helps you clearly visualize where each instrument or voice is coming from.







Appearance and Style



Are your speakers currently on a shelf? Are you want to keep their wires hidden away? Then you'll be pleased to know that our floor speaker mount offer built-in cable management to conceal wires. And many speakers have attractive wood veneers and deep finishes that deserve to be treated as fine furnishings, and stands are the best way to display them.

• 📻 🔊【ACHIEVE THE BEST SOUND】 Height adjustable speaker stands from 18.7”to 44.33” can help you get the best sound from your speakers by creating a listening "sweet spot" when you are seated. Placing your bookshelf speakers on the appropriate height stands can also reduce reflections to give you purer sound as clearly as possible.
• 📻 🔊【UNIVERSAL STAND ADAPTE YOUR SPEAKERS】 The floor speaker stand can fit a variety of different types of small satellite & bookshelf speakers weight up to 11lbs. Compatible brand for Klipsch, Sony, Yamaha, Harmon Kardon, Edifier, Polk, Samsung, Bose, JBL, PA DJ and other speakers.
• 📻 🔊【HIDE WIRES FOR A NEAT APPEARANCE】 The PSSS2 smart speaker stands come with a large hole(1.18"H x 0.59W) to manage your messy cables to get a clean and tidy appearance. This is especially helpful if you're using stands for surround speakers in a home theater system and want to keep things looking as tidy as possible.
• 📻 🔊【QUICK & EASILY INSTALLATION】 You can easily pan the top plate 180 degrees from 5.9 to 10.82 inches to fit your various speakers of different sizes. Provides the standard mounting hardware kits in the package, so you can quickly complete the installation in a few steps.
• 📻 🔊【HEAVY DUTY & STURDINESS】 This surround sound speaker stand is equipped with non-slip pads that allowing you to use it safely and securely on different types of the floors. The recast pole and solid base provide double protection for your speakers, no more worry about breaking the speakers anymore.

User questions & answers

Question:	What are the dimensions of the bases
Answer:	3mm steel with rubber feet. 7 7/8" square or 20 cm by 20 cm. wire clearance under the base fits my jacketed 16/2
Question:	Is this a good match for kilsph rw-51m bookshelf speakers
Answer:	My speakers are 8" wide and over ten pounds. They hold them fine...I don't know the dimensions nor weight of the RW-51M. Sounds like Klipsch bookshelf speakers with 5.25" woofer? It should be fine. They rather sturdy when properly assembled, but not audiophile 'anchored-to-the-floor' grade.
Question:	can i use to my speaker with the following dimension. WDH=22,30,40 cm
Answer:	Width barely...but it will...My speakers are 7.5" or about 20 cm
Question:	Do these stands have tilt
Answer:	Yes there is a 360 Degree All-round Tilt adjustment available. If needed, the speaker angle can be adjusted. On page 5 of the instruction manual(included) there are 4 steps required to make the adjustment.

Product features

Heavy duty & Sturdiness

The floor speaker stand can hold a variety of different types of satellite & bookshelf (ie. Klipsch, Sony, Yamaha, Harmon, Edifier, Polk, Samsung, Bose, JBL, PA DJ and others) speakers weight up to 11lbs.

Conceal wires management

Are your speakers currently on a shelf? Are you want to keep their wires hidden away? Our speaker. Provides a large hole to manage your messy cables to get a clean and tidy appearance.

Quick & easily installation

The PSSS2 floor speaker mount come with the standard mounting hardware kits and easy-to-understand instructions in the package, so you can quickly complete the installation in a few steps.

Product description

The Sanus steel Series SF30 is a 30-inch stand for small-to-medium bookshelf speakers up to 25 lbs. Its extra-large steel base includes optional carpet spikes for superior stability on any surface. Twin heavy-gauge steel pillars feature a concealed wire path and resonance damping rings, and they can be filled with sand or shot for added mass. The 6- by 6.5-Inch top plate offers brass studs and neoprene pads for speaker isolation. This product is sold as a pair.

• 30" tall stand, adjustable spikes and rubber feet
• 10 gauge steel base, can be Filled with sand, sold as a pair.
• The 6- by 6.5-inch top plate offers brass studs and neoprene pads for speaker isolation.
• SANUS steel Series SF30
• Its extra-large steel base includes optional carpet spikes

User questions & answers

Question:	Size of top plate
Answer:	From the Sanus site - Top plate dimensions are 6"W by 6.5"D-inch steel.
Question:	What is the size of the base
Answer:	The speaker base is 6.5" by 6.0", the floor base is 14" by 11". I blues tacked my 12" by 8" Def Tech monitors to them and with the carpet spikes they have been very sturdy for almost 2 years now. But I have no kids or dogs to potentially knock them over. Great sound, no vibrations even when very loud.
Question:	How heavy is each stand? And what kind of shots (size wise) can you fill with
Answer:	I don't know how you would fill them with shot because the holes are so small. I had to use a very fine playground sand and feed it just a bit at a time into the holes.
Question:	Does the 30inch height include the spikes
Answer:	Hi. Mine are approx 28.75" from floor to top of platform without spikes.

• Super-rigid all-steel construction speaker stand rigidly supports a wide range of bookshelf-, monitor- and rear channel-type loudspeakers
• Three large diameter steel support columns arranged in a triangular shape are coupled to steel top and bottom plates forming an incredibly rigid platform for enhanced speaker performance
• The 6” by 9” steel top plate matches a wide range of speakers; the 10” by 12” heavy gauge steel base plate combined with four adjustable steel cone point spikes provide excellent stability and easy leveling on any surface
• One steel column has openings at the top and bottom to hide speaker cables and two columns can be sand- or shot-filled for even better vibration damping
• Now available in five heights

User questions & answers

Question:	What is the height of this stand? It says 20 inches on the title. Description doesn't say and comments below indicate different height stands
Answer:	Different heights are available. Buy those that place your speakers at the hight you want. These are the 20 inch.
Question:	Please explain how to fill the columns with sand or shot
Answer:	You would have to install base and fill from the top screw hole down. There are disks welded at each end of the tubes. There is one tube that can route the speaker wire internally that probably could not be filled. So only two of the three per stand. Would be a long process to get sand into holes and probably not worth the time. Pretty stable as they are all metal.
Question:	how many pounds can they hold? i have 2 cewin vega 12 sl floor speakers
Answer:	These are made of 3 steel tubings each, for compression load, it can basically support anything in your household, including yourself and some. You should worry more about the stability of the speaker on the stand, if the speaker too tall with higher center of gravity or footprint too big, then it is not so stable, especially if someone walk by and the clothing gets caught or simply knocked it, then the speakers can fall, but the stand won't get damaged.
Question:	Could I use these for Sonos Play:5 pair
Answer:	Yes but would look silly.

Product features

Powerful Support for Your Sound

Your speakers may be capable of far better sound than you're getting now. Research shows that loudspeakers sound best when their tweeter is positioned at or slightly above the ear of the listener. A high quality steel speaker stand like the Pangea Audio LS300 not only positions the speaker drivers at the best acoustic height, but it also rigidly holds the speaker for optimal bass performance. The LS300 stand features three large-diameter steel support columns coupled to steel plates at the top and bottom. In combination with the rigid triangular shape, this design offers an incredibly strong platform for great speaker performance.

The Right Hardware Makes a Huge Difference

Nuts, bolts, spikes, and other hardware hold a stand together and make it perform well. Many manufacturers that use steel columns and steel plates coupling them with hardware that undermines the performance of the assembled stand.

The Pangea LS300 uses premium hardware. The oversize solid metal bolts rigidly couple the support columns to the base. This extra heavy hardware improves the speaker's bass performance. Maximum Recommended Speaker Weight: 48 lbs/22 kg (each).

Smart Products with Strong American-Based Customer Support

Founded in 2010, Pangea Audio, LLC is an American-based company dedicated to providing premium audio products and accessories at affordable prices. Pangea Audio was founded on a less-is-more philosophy, believing that high prices are not always the best measure of quality – and that superior design and quantity purchasing offer the best value to its audiophile customer base.

Pangea Audio products are currently in use by more than 100,000 audiophiles and music lovers in the US, Canada, Europe, Asia, and dozens of other countries.

Product description

This stylish speaker stand fits the Sonos ONE, PLAY:1 and PLAY:3 and is designed specifically to complement their modern brand aesthetic. Offering compatibility with the Sonos PLAY:3 in either horizontal or vertical orientation, the versatile WSS21 puts your wireless speaker at the manufacturer's recommended listening height, promising perfect audio performance. Stands are sold as single pieces or in pairs to accommodate any sort of system arrangement, be it home theater, surround sound, or ambient listening. For a seamless look free of pesky cables, our own Press Fit cable management technology secures cords down the back of the stand for complete concealment. Assembling easily and in only 15 minutes, you'll be enjoying perfect sound from this sleek stand in no time.

• Fits Sonos ONE, PLAY:1 and PLAY:3 wireless speakers
• Compatible with the Sonos PLAY:3 in either vertical or horizontal orientation
• Holds speaker at manufacturer's recommended listening height for optimal audio performance
• Anodized aluminum stand construction provides both durability and style
• Cable-hiding, integrated wire channels provide sleek, cord-free look

User questions & answers

Question:	what is the heights... is it adjustable
Answer:	Hi Mike, These stands are 34" tall and are not height adjustable. If you are looking for a height adjustable model, try our WSSA2! Kathryn @SANUS
Question:	One of the reviews says the Sonos One doesn't attach securely. Is there a bracket to make it work with the Sonos One to buy separately
Answer:	Hello, There is no screw to attach the Sonos One here. However, we have tested these to withstand a 10 degree tilt to make sure they keep your speakers safe! Kathryn @SANUS
Question:	Is this one or two stands
Answer:	Hello Summer, This is for two stands. If you are looking for one, check out the WSS21. Kathryn @SANUS
Question:	What's the remaining length of the factory power cable once it's routed through the stand
Answer:	Depends on your speaker. I have Sonos One. If the cited to the speaker is pulled taut, there is about 18” of power cable left.