7 best eug projector mounts

• Universal Mounting fitting the majority of projectors on the market. Distance between mounting holes on back of projector must be between 2" to 12.5” diagonally
• Solid Construction made entirely of high grade steel, supporting projectors up to 30 lbs
• Fully Adjustable with 15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all the right viewing angles
• Telescoping Height Adjustment mounting system extends your projector from 15” to 23” from the ceiling surface
• Easy Installation with quick release hooks that attach and detach by tightening and loosening mounting bolts

User questions & answers

Question:	Does it fit with Epson
Answer:	Hello, Thanks for checking! This mount fits the majority of projectors on the market. Distance between mounting holes on back of projector must be 12.5” diagonally or less. Thank you!
Question:	Does this hide wires
Answer:	Yes, this mount has internal cable routing to keep the wires hidden.Thank you!
Question:	What is the diameter of the pole/ post
Answer:	The pole has a somewhat rectangular shape, with a width of 1-3/4" and depth of 1-3/8".Thank you!
Question:	Is the minimum distance from the top of the projector to the ceiling 12.5" or 15"? The product description has some conflicting information
Answer:	The distance from the ceiling is adjustable from 15" to 23". The mounting holes for the projector have a maximum diagonal extension of 12.5". Thank you!

Product features

All The Right Angles

Fully adjustable projector mount featuring 15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all the right viewing angles. The bolts can be tightened and loosened with the provided hex tool for flexible movement or securing in position

Sturdy Steel Mounting

Trust our mount to keep your projector safe and secure. Solid construction made entirely of high-grade steel supports projectors up to 30 lbs. We provide the necessary mounting hardware to secure mount and projector to ceiling surfaces.

Simple Height Adjustment

MOUNT-VP02W extends with telescopic height adjustment 15” to 23” from flat ceilings to fit a variety of placements and user needs.

Why Choose VIVO?

Many ergonomic office solutions come at a high cost. Our mission is to use innovation, creativity, and efficiency to produce a more affordable solution that doesn't sacrifice quality.

We Make It Easy.

We want our products to be easily accessible to the millions of office workers around the globe so that comfort and productivity can brighten your day and strengthen your career.

We Care About Your Experience.

We don't just sell products... we sell solutions for needs encountered in the workplace. Our prompt and friendly service will ensure those solutions work for you.

Product description

MOUNT-VP01W is a brand new, heavy duty, all steel, universal ceiling projector mount. Ideal for any home or office, this high grade steel mount is weight tested at 30lbs and designed with adjustable arms to fit most projector brands with mounting ranges from 2” to 12.5”. MOUNT-VP01W sits 6” from flat ceilings making it low profile. Features include 15 degree tilt, 15 degree swivel, and 360 degree rotation to maximize projection angles. Simple tightening of joints makes this as fluid or stationary as desired. This is a quick assembly and comes with common mounting hardware. The projector mount comes in a white finish.



Important Note: As mentioned above the mounting arms for this projector mount have a maximum reach of 12.5”. Before purchasing, be sure to find the mounting holes on top of your projector and measure the distance between each one (especially the ones diagonal from one another). If all diagonals measure 12.5” or less then this mount will fit your projector.



Compatibility

Fits most projectors on the market. Distance between mounting holes on back of projector must be 12.5” or less

High-grade steel supports projectors up to 30 lbs



Features

15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all optimal viewing angles

Obscure mounting system holds your projector just 6” from the ceiling surface

Possesses quick release hooks that detach and attach by loosening and tightening mounting bolts

Quick assembly and comes with common mounting hardware

• Universal Projector Mount - Fits the majority of projectors on the market. Distance between mounting holes on back of projector must be 12.5” or less.
• Strong 30 Lbs. Support - Made entirely of high-grade steel, this mount holds projectors weighing up to 30 lbs, keeping your expensive equipment safe and secure.
• Fully Adjustable - Features +15° to -15° tilt, +15° to -15° swivel, and 360° rotation. Hits all the right viewing angles so you and your guests can watch in comfort.
• Low Profile - This mounting system holds your projector just 6” from the ceiling surface. The white powder-coated finish blends well with the majority of home and office environments.
• Easy Installation - Quick release hooks attach and detach by tightening and loosening the mounting bolts. All necessary hardware and instructions are provided for assembly.

User questions & answers

Question:	Is this compatible with the viewsonic pa503s
Answer:	Hello, Thanks for checking! This is compatible with the distance between mounting holes on the back of projector are 12.5” or less., Thank you!
Question:	Will this fit the Optoma DH
Answer:	Thank you for your interest! This mount will work for projectors that have mounting holes up 12.5" apart diagonally or less and weigh 30 lbs or less.
Question:	Does this item fit the Epson Home Cinema
Answer:	Hello, Thank you for your interest! As long as the mounting holes on the projector are 12.5" apart or less and it weighs less than 30 lbs this will work for you. Thank you, VIVO Customer Support
Question:	Will this fit the Optoma hd
Answer:	As long as the mounting holes on your projector are no more than 12.5" apart, this mount will fit.Thank you!

Product features

All the right angles

Fully adjustable projector mount featuring 15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all the right viewing angles. The bolts can be tightened and loosened with the provided hex tool for flexible movement or securing in position.

Quick release

Easy installation with quick release hooks that attach and detach by tightening and loosening the mounting bolts.

Dependable mounting

Trust our mount to keep your projector safe and secure. Solid construction made entirely of high grade steel supports projectors up to 30 lbs. We provide the necessary mounting hardware.

Product description

Compatible with:

The mini projector mount compatible with QKK, DR.J Upgrade, DBPOWER, Anker,

AAXA Technologies, Artlii, LoongSon, APEMAN and Most Other Mini Projector.

Note: Please make sure that the projector comes with tripod screw hole Before you

bid the item.



product information:

Long: 175mm

Weight: 72g

Safety Load: 5KG

• Universal Mount: The Universal Projector Mount fits the majority of mini projectors with 3 sizes of screw adapters with a length of 175mm/ 6.88in.
• Screw Adapters Size: 3.9mm/0.154in, 6mm/0.236in, 6.35mm/0.25in.
• Use Feature: Tilt Angle-90 degrees, Rotate Angle-360 degrees, Safety Load-5KG.
• Simple & Convenient: The projector mount pole is easy to be installed with accessories, screws and 3 adapters. Just rotate the knob to and tighten it to get the best angle.
• Note: Please make sure that the projector comes with tripod screw hole Before you bid the item.

User questions & answers

Question:	Is it adjustable in direction? Can you mount it and move it to face other directions
Answer:	My mini projector is wonderful. We have ours mounted in the ceiling in case we change our living room around we can always turn the projector any direction we like and not have to take it down.
Question:	What is the length of the rod? Like how low does the projector hang
Answer:	about a 8-10 inches, its short.
Question:	Is it compatible with a top vision projector
Answer:	I think most projectors have the standard screw compatibility. This should fit the projectors.
Question:	Is this mount compatible with Wimius projector brand
Answer:	It should be

• This cast aluminum projector mount adds versatility and simplicity to mounting a projector to a ceiling
• The adjustable mounting arms adapt to projectors allowing for flexible installation
• Tilt: Yes

User questions & answers

Question:	Does this mount come with M6 x 4 screws to attach them to the projector
Answer:	Yes.M6 screws are among the assortment of screws supplied: M3,M4,M5,M6For M6, two sets of sizes are provided:M6x16 screw (x4)M6x40 screw (x4)Please make sure you use the correct length screw as specified by your projector manufacturer. If in doubt, please check your projector manual or contact the manufacturer directly.
Question:	No where in the instructions show that it can only be mounted on a wall, the prod images show it can, so can this be mounted on a wall
Answer:	I can definitely be mounted on a wall. You simply set it up that way, then tighten the bolts. That is they way I use mine and it works perfectly. Just be aware that you must have a small or normal size projector, as a giant projector would not work.
Question:	Can you mount this to a wall making an L shape? How much room is there from the mounting plate to the angle joint
Answer:	I mounted my Benq HT2050 projector to the wall this way and an even larger projector could be mounted this way. The arms allow you quite a lot of flexibility, so you could extend them into the room quite a ways, although a heavy projector might tip a bit, which you can adjust for.
Question:	Do you need a wall stud to mount this
Answer:	I screwed the base of my mount to a stud. I located the studs by attaching a string to a refrigerator magnet and dragging it across the wall at various heights until I found the studs.

Product features

Universal Design

Its unique design, array of drop extensions, and cable management allow the mount to adapt to almost any installation.

Small projectors - use 3 arms instead of 4 provided If mounting points are smaller than universal spider, simply rotate the arm(s) under the universal spider plate.

Large projectors - use 4 arms provided Simply rotate the arms to suit.

Very Large projectors (with mounting points over 12 inches apart) - use the optional extension arms (AMRP10057) to extend the arms from 12 inches up to 15.7 inch reach.

High Quality Engineered

Featuring a reinforced steel plate and cast aluminum mounting head, this lightweight mount can support projectors up to 30 lbs. Its cast aluminum construction provides a strong, lightweight, heat-dissipating platform that is perfectly suited for mounting any A-V projector in a suspended ceiling.

Cable Management

Easy management to ensure that all cables are tucked away for an aesthetic appeal.

Tools and Fitment

No need to buy extra parts in order to mount your projector! All screws, washers, tools are included in order to ensure perfect fitment.

Flexible Alignment

180° pitch & yaw, 360° rotation with lock-down for perfect A-V projector alignment.

Optional Pole Adjust

Choose from any extension tube or combination that's right for you. Available in white, silver, and black color variations:

AMRE5003(B) 3" extension

AMRE5006(B) 6" extension

AMRE5012(B) 12" extension

AMRE5024(B) 24" extension

AMRE5048(B) 48" extension

AMREADJ1626(S)(B) 16-26" adjustable extension pole

Tubes allow internal cable management and can be combined to form lengths. eg. 6 inch +12 inch = 18 inch tube.

SELECT A COLOR THAT WORKS WITH YOUR PROJECTOR

Available in white (AMRP100), silver (AMRP100S), and black (AMRP100B)

SELECT A COLOR THAT WORKS WITH YOUR PROJECTOR

Available in white (AMRP100), silver (AMRP100S), and black (AMRP100B)

SELECT A COLOR THAT WORKS WITH YOUR PROJECTOR

Available in white (AMRP100), silver (AMRP100S), and black (AMRP100B)

Product description

The APMEB Universal Projector Mount is one of a kind. We designed this mount to be 100% universal and compatible with all Projectors on the market. The Four Connection Components can be extended or retracted to attach to the mounting holes on the projector. Additionally, some Projectors have only three mounting holes but with this mount, using all four connection components is not necessary. The mounting plate also features a 0-90 degree turn for recessed installation. Our APMEB supports up to 65LBS and constructed of 100% High-Grade Steel.

• Universal Design with Four Adjustable Arms: The arms are fully adjustable to fit virtually any projector. The arms are also removable for projectors that have less than 4 mounting points.
• 7" Low Profile and Optional Adjustable Extension Pole: The APMEB is ideal for low profile mounting as well as setups that require an extension pole. The profile is 7" without the extension. With the extension, the profile has an adjustable range of 18.75-27".
• Cable Management: The center of the ceiling plate is stamped out to allow cables to pass through for a clean and sleek cable management system.
• Vaulted Ceiling Plate: The APMEB is designed so it may be used with vaulted ceilings.
• Safety Cable: Attach the projector to the mount with the metal tether for added security during installation. The cable may also be used as an extra element of security once the projector is mounted.

User questions & answers

Question:	Will the mount attach to a 2x4 or is mounting bracket larger
Answer:	the SBX-+C-7111XH rod is rated 2-10oz for the lure weight.
Question:	How long is the HDMI cable that comes with this mount
Answer:	the 7'11 XH rod is rated 15-40 lb line weight.
Question:	will it fit optoma 142x
Answer:	Flimsy cardboard box. Surprise nothing was broken. Should of been a cardboard tube.
Question:	anyone using on a 3-hole Optoma HD141x? Thanks in advance
Answer:	The one I bought came with a replacement tail.

• Universally Compatible: This projector ceiling mount supports most projector brands with distance between the mounting holes on back 12.1 inches or less. This mount can be used on flat ceiling.
• High Grade Material: Crafted from premium quality and heavy duty steel to provide a reliable projector mount with maximum strength and support. Max Load: 30 lbs (13.6kg).
• Full Motion Adjustable Mount: Our projector ceiling mount can tilt 25 degrees up and down, swivels 90 degree from left to right and 360 degrees rotation, hitting all possible viewing angles. The mount provides a 43.6-inch extension and collapses to 23-inch from the ceiling using the extendable arm and 8.9-inch without the arm.
• Easy to Install: Pre-assembled, this projection mount can be set up in a few steps with quick release hooks that attach and detach by tightening and loosening mounting bolts. Warm Tip: To prevent the mount from shaking,please tighten the screws marked in the picture above.
• Package includes: A pre-assembled projector ceiling mount and all necessary hardware and instructions booklet. Compatible with BenQ, Epson, Acer, Optoma, Sony, Video, Dell and other popular brands. If our product is not suitable for your projector, or if you have any questions about the product and package, please do not hesitate to contact us.

User questions & answers

Question:	Will this extend 18-20 inches
Answer:	Yes, It mounts the projector between 23" to 43.6" from the ceiling using the extendable arm
Question:	Will this mount work for the Azues RD 822 video projector on a sloped ceiling
Answer:	I was not able to mouth the two i purchesed with out pulling out my grinder and cresting groves so it would hold at an angle, and by jerry rigging parts from an old mount to get it to fit on the four holes of the bottom of the projector. Dont buy unless your projector is very small.
Question:	Does this work with epson pro g6050w
Answer:	it has adjustable legs that will fit the projector....It comes with all screws to fit on to your projector....my projector had different screws to mount to....check screws first....some screws are SAE and others are metric....also length of screws....make sure they are not too long...may damage internals !! best of luck
Question:	Will this work on an epson
Answer:	I have the Epson 1060 projector. It works perfectly on mine. As long as your projector has 3 mounting holes to screw in the bolts, you’ll be fine, more holes the better. You can move the arms to go anywhere you need them to and they also extend. I googled your projector. It’ll be fine.

Product features

Maximum Load Capacity

30lbs (13.6kg)

Universally Compatible

• concrete
• drywall

Distance between Holes on Back

Compatible with projectors with distance between the mounting holes on back 6-12.1 inches

Adjustable Height

The mount provides a 23-inch to 43.6-inch extension and collapses to 8.9-inches from the ceiling

Step 1

Mount the Ceiling Plate

Step 2

Attach the Projector to the Mount

Step 3

Assemble the Mount

Warm Tip

To prevent the mount from shaking,please tighten the screws marked in the picture above

Product description

The Projector Bracket Mount come with 1/4 inch thread. It's pretty standard for mini projectors and cameras, such as surveillance security cameras, LeFun mini projector, lg:pw-800 mini beam projector, LCD or DLP projectors, and digital camera, camcorder or 35mm SLR, etc.



Advantages:

- Adjustable ball at the end of the mount that allows you to adjust the proctor to any angle.

- Suitable for ceiling mounted, wall mounted. Fits most projectors and surveillance security cameras.

- Surface oxidation treatment ensuring durability and dependability.

- Any question feel free to contact our reliable customer support for personalized assistance.



Features:

Material: Aluminium Alloy

Safety Load: 5KG(11 lb)

Rotate Angle: 360 degrees

Tilt Angle: 90 degrees

Base Diameter: 90mm

Tube Diameter: 17mm

Length: 210mm



Package Included:

1 x Projector Mount Bracket



Notice:

The thinnest M4 (ø 3.9 mm) screw can not reach the load capacity of OVER 2.5 KG. Please be careful.

• ★Made of durable aluminium alloy
• ★360° Rotatale head, easy to adjust angle
• ★Easy to install, Compact and portable mount
• ★Suitable for ceiling mounted, wall mounted or tabletop stand
• ★Compatible with universal projector and DLP, and digital camera, camcorder or 35mm SLR, etc

User questions & answers

Question:	Is this strong enough to hang an projector from the wall
Answer:	No