10 best benq projector mounts

Product description

Universal ceiling mount. Includes all BenQ Projectors except CP220 & gp Series. Steel/aluminum alloy with 360 degree rotation angle and 25 degree tilt. Fits Projectors with a mounting holes less than 15" diameter.

• Angled ceiling compensation adjustable plus/minus 25 degrees
• Extends 5 to 22.7 inches
• 360 degrees rotation angle

User questions & answers

Question:	Does this tilt? I need to mount this high on the ceiling
Answer:	,I toss this unit out do to missing parts and got a better one but it will work You can attach directly to drywall with appropriate hardware
Question:	does it fit ht
Answer:	No, this normal working boot
Question:	What is the length range of the pole
Answer:	Mouse fuzz and a bit of padding - they seem perfectly adequate for this winter, provided we get some snow.
Question:	How did you adapt this for use on the 1070, the holes dont line up
Answer:	They only lasted me half a winter. I wore them every day, but still... not durable.

Product description

0.6 Wall Mount & for MW860USTi, MW870UST

• WM06G3
• 5J.J4R10.011
• Dimensions: 13.6 x 5.2 x 10.9 inches

Product description

MOUNT-VP01W is a brand new, heavy duty, all steel, universal ceiling projector mount. Ideal for any home or office, this high grade steel mount is weight tested at 30lbs and designed with adjustable arms to fit most projector brands with mounting ranges from 2” to 12.5”. MOUNT-VP01W sits 6” from flat ceilings making it low profile. Features include 15 degree tilt, 15 degree swivel, and 360 degree rotation to maximize projection angles. Simple tightening of joints makes this as fluid or stationary as desired. This is a quick assembly and comes with common mounting hardware. The projector mount comes in a white finish.



Important Note: As mentioned above the mounting arms for this projector mount have a maximum reach of 12.5”. Before purchasing, be sure to find the mounting holes on top of your projector and measure the distance between each one (especially the ones diagonal from one another). If all diagonals measure 12.5” or less then this mount will fit your projector.



Compatibility

Fits most projectors on the market. Distance between mounting holes on back of projector must be 12.5” or less

High-grade steel supports projectors up to 30 lbs



Features

15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all optimal viewing angles

Obscure mounting system holds your projector just 6” from the ceiling surface

Possesses quick release hooks that detach and attach by loosening and tightening mounting bolts

Quick assembly and comes with common mounting hardware

• Universal Projector Mount - Fits the majority of projectors on the market. Distance between mounting holes on back of projector must be 12.5” or less.
• Strong 30 Lbs. Support - Made entirely of high-grade steel, this mount holds projectors weighing up to 30 lbs, keeping your expensive equipment safe and secure.
• Fully Adjustable - Features +15° to -15° tilt, +15° to -15° swivel, and 360° rotation. Hits all the right viewing angles so you and your guests can watch in comfort.
• Low Profile - This mounting system holds your projector just 6” from the ceiling surface. The white powder-coated finish blends well with the majority of home and office environments.
• Easy Installation - Quick release hooks attach and detach by tightening and loosening the mounting bolts. All necessary hardware and instructions are provided for assembly.

User questions & answers

Question:	Is this compatible with the viewsonic pa503s
Answer:	Hello, Thanks for checking! This is compatible with the distance between mounting holes on the back of projector are 12.5” or less., Thank you!
Question:	Will this fit the Optoma DH
Answer:	Thank you for your interest! This mount will work for projectors that have mounting holes up 12.5" apart diagonally or less and weigh 30 lbs or less.
Question:	Does this item fit the Epson Home Cinema
Answer:	Hello, Thank you for your interest! As long as the mounting holes on the projector are 12.5" apart or less and it weighs less than 30 lbs this will work for you. Thank you, VIVO Customer Support
Question:	Will this fit the Optoma hd
Answer:	As long as the mounting holes on your projector are no more than 12.5" apart, this mount will fit.Thank you!

Product features

All the right angles

Fully adjustable projector mount featuring 15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all the right viewing angles. The bolts can be tightened and loosened with the provided hex tool for flexible movement or securing in position.

Quick release

Easy installation with quick release hooks that attach and detach by tightening and loosening the mounting bolts.

Dependable mounting

Trust our mount to keep your projector safe and secure. Solid construction made entirely of high grade steel supports projectors up to 30 lbs. We provide the necessary mounting hardware.

Product description

Strong Practicability

This mount has many kinds of installation methods, such as: Flush Ceiling Installation, Telescoping Arm Ceiling Installation, Wall Installation. So it perfect for meeting rooms, living rooms,home theaters, offices, schools, gyms and more.





Strong Compatibility

This hanger is suitable for most projectors with 3 or 4 mounting holes ranging from 1.7 inches to 15 inches diagonally. In addition, this hanger has telescopic function, which can adapt to various projection requirements of height.





Strong Durability

The hanger is made from solid steel for durability with minimal vibration compared to aluminum models, with quick-release connector allows the projector to be installed quickly and released for maintenance without re-alignment.





Package Include 1 x Projector Mount; Standard Hardware included.





Note: the projector used in this projector mount should have the following conditions:

1. The projector has 3-4 screws holes to install screws;

2. The diameter of screw holes is 3 mm or 4 mm.

3. The wall where the mount is installed should be a hard solid wall, not a hollow and weak wall.

• 【3-In-1 Universal Projector Mount】1. Flush Ceiling Installation, 2.Telescoping Arm Ceiling Installation, 3.Wall Installation
• 【Solid Construction】Made entirely of high-grade steel，supporting projectors up to 40 lbs(18kg), wall-hanging 20 lbs(9kg).Note:If used in large projectors, the stand may bend.
• 【Fully Adjustable】Features +30°to -30°tilt, +30°to -30°swivel. Hits all the right viewing angles so you and your guests can watch in comfort.
• 【Extendable】Mounting system extends your projector from 16.9” to 25.6” from the ceiling surface,13.8” to 22.5” from the wall. In addition, Flush Ceiling Installation with a minimum length of 5”.
• 【Easy Installation】Quick release hooks attach and detach by tightening and loosening the mounting bolts. All necessary hardware and instructions are provided for assembly.
• Note: the projector used in this projector mount should have the following conditions: 1. The projector has 3-4 screws holes to install screws; 2. The diameter of screw holes is 3 mm or 4 mm. 3. The wall where the mount is installed should be a hard solid wall, not a hollow and weak wall.

User questions & answers

Question:	How about the business
Answer:	It fits in the bag easily and is very light weight
Question:	Does the screw good for block as well as dry wall
Answer:	Thank you for your interest in our sleeping bags. 1.35 means recommended limit temperature: 41℉-77℉, 1.6 means recommended limit temperature: 32℉-68℉.
Question:	What are the dimensions of the base that secures to the ceiling
Answer:	Under the "size" on the details of thr 1.35 it says "kids" maybe its smaller. I'm going to order the 1.6.
Question:	Vankyo leisure 3 fittment
Answer:	Yes

Product description

Will this projector mount fitting for me? Please check the following detail:

• Please check the wood studs on your ceiling. This mount can also be used on concrete and brick ceiling. NOTE: does NOT support vaulted ceiling and drywall.
• Please check the weight of your projector, the projector weight should be less than 30lbs (13.5kg).
• Check the mounting holes on the top of your projector and measure the distance between each hole. Your projector VESA mounting hole must be between 2” to 12.5”.

Why choose WALI? The benefit from WALI projector ceiling mount:

• High-quality heavy gauge steel support maximum weight up to 30lbs (13.5kg).
• Four pieces detachable bracket with angle adjustment support all 3 holes pattern or 4 holes pattern projector.
• The package includes three different lengths of brackets could support all types of mounting holes from 2” to 12.5”.
• Fully adjustable with tilt +/- 15 degrees and swivel +/- 15 degrees, bracket allows 360 degrees of rotation.

Newly designed projector ceiling mount:

• Low profile projector mounting system holding your projector just 6” from the ceiling surface.
• Quick release and fasten the mount to the ceiling makes installation easy.

Package Includes:

1 x WALI Projector Ceiling Mount (White)

1 x User Manual

1 x Standard Mounting Hardware

• Compatibility: Projector mount fit most of the projector in the market, compatible with distance mounting holes between 2" to 12.5”.
• Heavy Duty: Support maximum loading weight 30 lbs/13.5 kg. Regular concrete and brick ceiling or wooden stud supported. NOTE: This mount does NOT support the vaulted ceiling and regular drywall.
• Fully Adjustable: Tilt +/- 15 degrees and swivel +/- 15 degrees. Angle adjustment bracket allows 360 degrees of rotation. Low profile design for quick and precise projector positioning.
• Easy installation: quick release and fasten the mount to the ceiling makes installation easy. Mounts to Wood studs, concrete and wall surfaces, flat ceiling, drop ceiling, suspended ceiling, etc.
• Package Includes: WALI Projector Ceiling Mount (White) x 1, Mounting Hardware Kit x 1, User Manual x 1, 10 Years Protection.

User questions & answers

Question:	Can i use this with a nec lt260 projector
Answer:	Please check your projector mounting holes is between 2" to 12.5", and projector weight 30 lbs or less. NOTE: This mount does NOT support the vaulted ceiling and regular drywall.
Question:	Work on Lg minibeam
Answer:	did this end up fitting your lg minibeam? i am planning on getting this if it does.
Question:	I'd like to use handle knob screws to easy hang/release my projector. What is the screw size on mount hooks
Answer:	It's the screw sizes on the projector that matter. The screws go through the bracket holes but actually thread into the projector.
Question:	Does this fit Epson 5030UB projector
Answer:	It should. If you dont see any spot to screw it in. Check under the rubber feet.

Product features

PM-002-WHT

Durable white finish comes with the latest design in safety, flexibility and value for many of today's most popular projectors.

Product description

Versatility



MI-604 is a versatile and sturdy projector mount that is suitable for any projector mount installation. This projector ceiling/wall mount is made from solid steel, unlike most cheaper models made from lighter aluminum alloy The modular design of this projector mount allows you to install it flush to a ceiling, lowered Down from a high ceiling with the telescoping arm, or to a wall.



compatibility



Mount-It! projector mount is compatible with virtually all the projectors on the market. The mount can carry up to 44 lbs. It can be used to mount projectors that come with 3 or 4-Hole mount patterns. The adjustable arms that connect to the projector mounting holes can be collapsed or extended to fit different monitor hole patterns between 8.85" And 12.40" From the center of the projector mount. This projector mount will work with most popular projectors from BenQ, ViewSonic, Epson, Optoma, as US and Acer.



Features



MI-604 Provides full-motion capabilities, with pitch, roll, height adjustment (ceiling installation) and extension from the wall.

almost Zero vibrations compared to aluminum models.

The quick release connector allows the projector to be installed quickly and then easily released for maintenance, without re-alignment.

comes with cable management to conceal HDMI, audio, video cables.

The package comes with the necessary hardware to install the mount to the ceiling/wall and to the projector.

• 3-In-1 Universal Projector Wall Mount Bracket: 1. Flush Ceiling Installation, 2. Telescoping Arm Ceiling Installation, 3. Wall Installation
• Universal design compatible with all monitors in the market. The mounting holes on projector must be between 8.85" and 12.40".
• SolidFull-Motion Design - Pitch: +/- 15 degrees, Roll: +/- 8 degrees, Swivel: 360 degrees, Height Adjustment (ceiling installation): 5 inches to 25.6 inches. Extension from the wall (wall mounted installation): 16.9 inches to 25.6 inches. steel material with durable powder-coated finish (black)
• Full-Motion Design - Pitch: +/- 15 degrees, Roll: +/- 8 degrees, Swivel: 360 degrees, Height Adjustment (ceiling installation): 5 inches to 25.6 inches. Extension from the wall (wall mounted installation): 16.9 inches to 25.6 inches.
• Cable management system helps keep cables concealed and organized

User questions & answers

Question:	Does it fit optoma hd142x
Answer:	I forgot, it was for my 6 year old grand son. It was the right size for him, I think it was 4 or 4 1/2 feet, I think the size was listed on the add or I wouldn't have bought it. I searched pretty hard to find a short one for him that didn't actually look like a kids pole. This one was nice, I was happy with it.
Question:	Will this fit an epson vs350 xga
Answer:	Yes 1 piece rod
Question:	Would it be possible to piece two of these together for greater length? Will be bolted to steal so no worries about stress on wall
Answer:	Yes, conventional reels .
Question:	How large is the mounting plate which attaches to the wall and how far apart are the holes
Answer:	This is a medium action and the flex is toward the tip. This would be best for pitching a large bait or an iron jig. I think a slow pitch rod would be more flexible throughout the length of the rod.

Product features

Mount-It! Wall and Ceiling Projector Mount

This versatile projector mount is suitable for any installation. Made from solid steel for durability with minimal vibration compared to aluminum models. It adapts to your environment - install it flush to a ceiling, lowered down from a high ceiling, or to a wall. Find the best projection angle with pitch, roll, height adjustment (from ceiling), and extension from the wall. The quick-release connector allows the projector to be installed quickly and released for maintenance without re-alignment.

3 Mounting Options

1. Flush ceiling installation
2. Telescoping arm ceiling installation
3. Wall installation

Full Motion

Full motion design lets you pitch your projector up to 15 degrees and roll it up to 8 degrees to find the perfect projection angle.

Cable Management

Conceal HDMI, audio, video cables that are attached to your projector for a more organized appearance.

Vertical Extension

Adjust the length of the bracket from 5 inches up to 25.6 inches from the ceiling.

Horizontal Extension

Bracket extends from 13.5 inches up to 22.5 inches from the wall.

Adjustable Arms

The arms can extend to fit mounting hole patterns between 8.85 inches and 12.4 inches.

• Universal Mounting fitting the majority of projectors on the market. Distance between mounting holes on back of projector must be between 2" to 12.5” diagonally
• Solid Construction made entirely of high grade steel, supporting projectors up to 30 lbs
• Fully Adjustable with 15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all the right viewing angles
• Telescoping Height Adjustment mounting system extends your projector from 15” to 23” from the ceiling surface
• Easy Installation with quick release hooks that attach and detach by tightening and loosening mounting bolts

User questions & answers

Question:	Does it fit with Epson
Answer:	Hello, Thanks for checking! This mount fits the majority of projectors on the market. Distance between mounting holes on back of projector must be 12.5” diagonally or less. Thank you!
Question:	Does this hide wires
Answer:	Yes, this mount has internal cable routing to keep the wires hidden.Thank you!
Question:	What is the diameter of the pole/ post
Answer:	The pole has a somewhat rectangular shape, with a width of 1-3/4" and depth of 1-3/8".Thank you!
Question:	Is the minimum distance from the top of the projector to the ceiling 12.5" or 15"? The product description has some conflicting information
Answer:	The distance from the ceiling is adjustable from 15" to 23". The mounting holes for the projector have a maximum diagonal extension of 12.5". Thank you!

Product features

All The Right Angles

Fully adjustable projector mount featuring 15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all the right viewing angles. The bolts can be tightened and loosened with the provided hex tool for flexible movement or securing in position

Sturdy Steel Mounting

Trust our mount to keep your projector safe and secure. Solid construction made entirely of high-grade steel supports projectors up to 30 lbs. We provide the necessary mounting hardware to secure mount and projector to ceiling surfaces.

Simple Height Adjustment

MOUNT-VP02W extends with telescopic height adjustment 15” to 23” from flat ceilings to fit a variety of placements and user needs.

Why Choose VIVO?

Many ergonomic office solutions come at a high cost. Our mission is to use innovation, creativity, and efficiency to produce a more affordable solution that doesn't sacrifice quality.

We Make It Easy.

We want our products to be easily accessible to the millions of office workers around the globe so that comfort and productivity can brighten your day and strengthen your career.

We Care About Your Experience.

We don't just sell products... we sell solutions for needs encountered in the workplace. Our prompt and friendly service will ensure those solutions work for you.

Product description

Product Name: Projector Mount / Projector Stand/Projector Ceiling Mount



Description:

Material: aluminum alloy

Height: 400mm

Maximum load: 5kg

Round chassis size: 118-250 mm

The whole weight: 0.5kg

Surface treatment: High temperature spray paint silver



Package Content:

1 x Projector Mount (Screws are included)



Notice:

The weight of your display should be less than 11 lbs.

Please make sure that the projector comes with tripod screw hole Before you bid the item

• Using this projector mount/Projector Stand to mount the projector on a ceiling or wall will give you a better viewing experience
• Easy to use, loading and unloading is very convenient
• With extension pole, height adjustable from 9-15.75 inches
• Swivel your projector 360 degrees to meet a myriad of needs and desires
• Please make sure that the projector comes with tripod screw hole Before you bid the item.

User questions & answers

Question:	The description says tray swivels. Are they talking rotating horizontally, or does the tray actually swivel side to side to change projector angle
Answer:	Barrel Swivel
Question:	If the projector screw is on the bottom of the unit will it project correctly if hung upside down
Answer:	Really good set to have it and very handy.
Question:	Can the plate tilt forward or back
Answer:	4 ounce each
Question:	Can you mount it on a ceiling fan
Answer:	I did cast under a bridge and hit the bridge. A small piece of the tail broke off. Other than that the paint doesn't scratch off like I thought it would. I personally like this lure.

• 2-In-1 DESIGN : Can be installed as a Flush mount or Telescopic with height adjustment 16.9" - 25.6". Minimum distance from ceiling (w/o extension column): 4.7in/12cm.
• PITCH: -15 to +15 degrees, Roll: -8 to +8 degrees, Maximum distance between mounting holes: 17.5 in/ 44.5 cm.
• MAX WEIGHT: Our products can only bear the maximum support weight: 44 lbs / 20 kg, if used in large projectors, the stand may bend. Note: This mount does NOT support vaulted ceilings and walls.
• EXTENDABLE : Mounting arms removable and extendable. With extension pole, height adjust from 10.62'' to 21.26'' (27 - 54 cm).
• UNIVERSAL MOUNTING：The hanger is easy to place and has three-hole and four-hole configuration. Almost all projectors can find a projector suitable for this mount. If the projector does not have the corresponding configuration, it does not apply to our products.

User questions & answers

Question:	I have an optoma hd146x and it only has a three hole configuration but everything i've found only shows a mount with four arms. will this work for me
Answer:	I had to turn mine upside down and remove the four foot screws and mount it, then in your projector menu you can flip the picture so it’s not upside down, I hope that helps you. I think it’s real common for you to have to do that, just make sure yours has that , you should be able to remove the feet and replace with your ceiling mount. Good luck.
Question:	Will this work for a benq ht2050a
Answer:	The four mounting screws are flexible to mount any position.
Question:	The four holes are too wide to fit all in the stud. Will the mount still support 30lbs if two are in the dry wall and two are in the stud
Answer:	The mount is not very sturdy. I would say max 16lbs, and 16lb is pushing it. They lied about 30lbs. 2 holes in the stud should be fine.
Question:	Has anyone bought this for the optoma hd27hdr? Does it fit
Answer:	I did, it is not that easy to fit it, you have to play around with the screws and bars it comes with, but I managed to install it, unfortunately this thing does not come with clear instructions either. only couple of drawings. so it is not as friendly as I though it will be.

Product features

Resuelve six problems

1.install 2. debug 3. route 4. bear weight 5. fix 6. ajustar the angle

• Universally Compatible: This projector ceiling mount supports most projector brands with distance between the mounting holes on back 12.1 inches or less. This mount can be used on flat ceiling.
• High Grade Material: Crafted from premium quality and heavy duty steel to provide a reliable projector mount with maximum strength and support. Max Load: 30 lbs (13.6kg).
• Full Motion Adjustable Mount: Our projector ceiling mount can tilt 25 degrees up and down, swivels 90 degree from left to right and 360 degrees rotation, hitting all possible viewing angles. The mount provides a 43.6-inch extension and collapses to 23-inch from the ceiling using the extendable arm and 8.9-inch without the arm.
• Easy to Install: Pre-assembled, this projection mount can be set up in a few steps with quick release hooks that attach and detach by tightening and loosening mounting bolts. Warm Tip: To prevent the mount from shaking,please tighten the screws marked in the picture above.
• Package includes: A pre-assembled projector ceiling mount and all necessary hardware and instructions booklet. Compatible with BenQ, Epson, Acer, Optoma, Sony, Video, Dell and other popular brands. If our product is not suitable for your projector, or if you have any questions about the product and package, please do not hesitate to contact us.

User questions & answers

Question:	Will this extend 18-20 inches
Answer:	Yes, It mounts the projector between 23" to 43.6" from the ceiling using the extendable arm
Question:	Will this mount work for the Azues RD 822 video projector on a sloped ceiling
Answer:	I was not able to mouth the two i purchesed with out pulling out my grinder and cresting groves so it would hold at an angle, and by jerry rigging parts from an old mount to get it to fit on the four holes of the bottom of the projector. Dont buy unless your projector is very small.
Question:	Does this work with epson pro g6050w
Answer:	it has adjustable legs that will fit the projector....It comes with all screws to fit on to your projector....my projector had different screws to mount to....check screws first....some screws are SAE and others are metric....also length of screws....make sure they are not too long...may damage internals !! best of luck
Question:	Will this work on an epson
Answer:	I have the Epson 1060 projector. It works perfectly on mine. As long as your projector has 3 mounting holes to screw in the bolts, you’ll be fine, more holes the better. You can move the arms to go anywhere you need them to and they also extend. I googled your projector. It’ll be fine.

Product features

Maximum Load Capacity

30lbs (13.6kg)

Universally Compatible

• concrete
• drywall

Distance between Holes on Back

Compatible with projectors with distance between the mounting holes on back 6-12.1 inches

Adjustable Height

The mount provides a 23-inch to 43.6-inch extension and collapses to 8.9-inches from the ceiling

Step 1

Mount the Ceiling Plate

Step 2

Attach the Projector to the Mount

Step 3

Assemble the Mount

Warm Tip

To prevent the mount from shaking,please tighten the screws marked in the picture above