12 best 3m tv mounts

• 9 packs of Strong 3M VHB adhesive pad is perfect for Haoyou Mounting brackets.
• Genuine adhesive pad: Adopts 3M VHB original authentic material, which is stronger than ordinary adhesive pad and more resistant to high temperature.
• Wipe the area that needs to be pasted with a cloth(Suitable for sticking to smooth Wall/smooth plastic products/smooth glass/smooth tiles/smooth wood products and other smooth contact objects). Not suitable for uneven/rough/curved surfaces. Please ensure that the contact surface of the adhesive is thoroughly cleaned and dried before applying new adhesive.
• Important Notes Easy to install, press it down repeatedly to make the adhesive surface fully contact. 24 Hours to use after installation for best results. Attaches firmly on almost any surface - Pads removable from surface by applying heat (e.g. hair dryer); No residue will remain when you remove the Adhesive pad.
• What can you get 9 Packs of 50mm replacement 3M VHB adhesive. 30-day unconditional money back guarantee and 18 months worry-free warranty guarantee, friendly customer service. No risk to buy!

User questions & answers

Question:	What is the diameter of the circle? Dimensions included are for the package
Answer:	The clicks are positive. Magpul states the following in the instructions: "Each click adjusts the POI ~1.13 (1 1/8) inches at 100 meters for a typical M4-type Carbine. Your results may vary depending on your weapon and the rail position of your sights (sight radius)." 100 meters is about 109 yards, so I'm guessing it's closer to 1 inch at 100 yards.
Question:	Is this double sided adhesive pad
Answer:	UNDERSTANDING CO-WITNESS Please post comments here. INTRO: Since this topic comes up quite a bit, I decided to put something together to help out anyone that is having a little trouble understanding the differences and to help to choose the right one. This will apply to AR-15 rifles, and more specifically to iron sights, red dot sights, and the low powered variable scopes (1x4 scopes) in tactical applications, not precision shooting. ABSOLUTE/REGULAR CO-WITNESS: This means that the reticle and the iron sights will line up. The irons and the red dot are pretty much the same height. I say pretty much because there is no such thing as "ABSOLUTE". The height for Iron sights is just under 2.6". Most of the Absolute/Regular Co-Witness mounts on the market such as Larue, ADM, Bobro, etc, are actually around 2.75", which is close enough to the iron sight height. LOWER 1/3 CO-WITNESS: This is where the iron sights appear in the lower 1/3 window/section of the optic. Most of the Lower 1/3 Co-Witness mounts on the market such as Larue, ADM, Bobro, etc, are around 3". FRONT AND REAR FLIP-UP BUIS: Front and rear flip-up BUIS is the most versatile set-up and gives you the greatest flexibility. BCM-URG-MID-14%20TR&.jpg FRONT AND REAR FIXED BUIS: These are generally the lightest, simplest, and generally the most rugged. c4cd4e0379a66e0736 .jpg FIXED FRONT/FLIP-UP REAR BUIS: This is one of the most popular set-ups because most AR's come with the fixed front sight base, which is pinned and very rugged. IMG_0399002_..jpg DETERMINING THE PROPER CO-WITNESS: Now that I explained some of the terms and some of the different available options, let's determine the best height to use. If you read some of these types of threads, you will read where guys will post that the lower 1/3 co-witness is best because it allows you to keep your head in a more upright position, which is ideal for CQB type work. The upright head position, IMHO, is the correct position. Unfortunately, we are not 1-size fits all. In other words, we are not all 6'3" tall. I learned that the hard way and it cost me $200 in mounts. I have always used the absolute/regular co-witness because it was very comfortable for me. My head was in the upright position when I shoot with irons or with the Aimpoint or EOTech with an absolute/regular co-witness. So one day I purchased an Aimpoint and was talked into getting the lower 1/3 mount because my head would be in an upright position. My first range session with these lower 1/3 co-witness mounts, proved to be a huge mistake. I was no longer able to even get a cheek weld position. It was more like a chin weld position. And shooting from the prone was very painful for my neck because I had to lift up my head to obtain a proper "chin weld" position. My friend on the other hand had no problem with the lower 1/3 mounts. I'm 5'7" tall and he's 6'2" tall. So what I recommend to determine what the best height FOR YOU is without going out and spending a couple of hundred dollars on mounts is to just look through your iron sights and determine where your head is. If you look through your irons and you r head is relatively upright, then you may want to go with the absolute/regular co-witness mounts. I should mention that the sight height is more critical when using a magnifier or a regular scope. When I just use an Aimpoint or EOTech, even if it is in the lower 1/3 co-witness, it isn't that much of a problem for me because the reticle in the red dot scopes floats around. Confused yet? It gets better. What if you use fixed front and rear BUIS or a fixed front and flip-up rear BUIS? Then you to deal with another factor that doesn't exist with the flip-up front and rear BUIS. Some people, no matter how hard they try, they just can't get used to having the front sight in the way. It can be very annoying, especially with a regular 1x4 scope because the reticle just sits right on top of the front sight post. At least with a red dot, you can slightly raise your head and the reticle will clear the front sight post and not be as annoying. CONCLUSION: If you have/use the front and rear flip-up BUIS, I recommend that you just determine what height is best for you based on your head position. If you have a fixed front BUIS/Sight, you have to first determine the proper height based on your head position, and then, if you determine that you would be better off with the absolute/regular co-witness height, then you have to determine if you can put up with the front sight being in the way. PHOTOS BY QUIB Paulo Santos Weapon Review Blog SPD CrossFit SPD CrossFit FaceBook Pagehttp://www.weaponevolution.com/forum/showthread.php?2497-UNDERSTANDING-CO-WITNESShttp://www.m4carbine.net/showthread.php?17049-Explanation-of-Co-Witness
Question:	Are these actually for real rifles? or just for airsoft/paintball
Answer:	No. Keep it on the rail, don't put it on the gas block if the gas block rail is lower. Your sights won't line up like they should if you do.
Question:	can these be mounted on scope mount on a standard hunting rifle
Answer:	I have mine mounted on a midwest industries free floating hand guard. I took my Colt AR and lined it up side by side with the barrels level and both sights were the same hight.
Question:	Advertised as Aluminum....so this isn't true
Answer:	Probably if it has standard rails. Mine is a Palmettos Arms 4 rail upper. Full length. It is not meant to mount on a gas block but a full hand guard.
Question:	Can you adjust the sights up and down
Answer:	A four post tool will work to initiate the process. Best have a supplemental small hex wrench to carry on. PITA! Design of this front sight really sux and deployment tensioner for both front and rear BUIS rates a negative -1.

• EASY TO MOUNT & INSTALL: Apple TV Mount that sticks to the back of your TV or any flat surface using strong 3M VHB tape (Apple TV & Remote not included). Install in just a few minutes, no screws or hooking into vents.
• WORKS WITH ALL: Compatible with Apple TV 4K, 2nd, 3rd and 4th Generation Apple TV (Use included adapter)
• COOL FLOW: Designed with air vents to allow sufficient airflow for Apple TV 4K.
• MOUNT ANYWHERE: Mount on any flat vertical surface, such as the back of your TV, side of TV cabinet unit, Walls and any other vertical surface.
• ONE MOUNT TO RULE THEM ALL: Our Brainwavz Apple TV Wall mount is compatible with all Apple TV from 2nd gen onwards, this includes 3rd gen, 4K & HD. So even if you own a older version and want to upgrade to a newer Apple TV, our mount already fits them, no need to buy a new mount!

User questions & answers

Question:	What are the length x width dimensions of the holder
Answer:	if the scope mount is a 21mm rail then yes I believe so. they are compatible with picatinny rails and weaver rails. if your rifle doesn't have 21mm rails I believe there is an adaptor to make it 21mm I hope this helps
Question:	Do you have to get in line of sight to change menu items, especially if mounted on back of TV
Answer:	No, the sights look and feel like polymer. Could it be aluminum under the polymer, maybe.
Question:	Will the fumctionality of the remote still work
Answer:	Yes, it could adjustable according to your needs and it's very convenient.

Product features

APPLE TV MOUNT

Easy to install Apple TV mount that can stick on to the back of your TV, Wall, side of a cabinet or any other vertical surface.

The Brainwavz Apple TV mount works perfectly with the Apple TV 4K and 4th Gen. An included adapter also enables the Apple TV mount to be used with 2nd, and 3rd generation models. (1st gen is not supported)

Both the main mounting case and the adapter have been designed for maximum airflow to help keep for Apple TV cool during use.

COOL FLOW

HEAT MANAGEMENT: Designed with air vents to allow sufficient airflow and cooling for your Apple TV.

COMPATIBILITY (No Adapter)

Works with the following models as standard, and without the use of the included adapter:

• Apple TV 4K (5th Gen)
• Apple TV 4th Gen

COMPATIBILITY (Using Included Adapter)

Works with the following using the included adapter:

• Apple TV 2nd Gen
• Apple TV 3rd Gen

Product description

Like most people in the world nowadays, we are bringing more and more electronic devices into the home, and with them more and more cables to follow.

It’s time to find some cable clips for taking care of those wires. So no look further! Our self adhesive cable clips do everything. A lifesaver for when your cables become unmanageable!



The Advantages of Adhesive Cable Clips



1. The cable wall clips are made of premium PA66 material. It is firm and sturdy.

2. Comes with self-adhesive pad, and the adhesive backing is strong and durable so that it can be put directly.

3. It helps keep your place neat and all cables wires are well organized and safe.

4. It is applied to various cables such as vehicle cables, computer cables, USB cables and TV cables on most surfaces in car, office and home.

5. The package included 50 pcs black clips in total, enough for your various needs.

6. They are easy to install and remove without leaving any residues.



Specification:



Name: Self-Adhesive Cable Clips Organizer

Material: PA66

Size: 0.55 x 0.56 x 0.32 Inch

Colour: Black

Suitable Wire Diameter: Under 0.66 Inch

Package includes:



50 x Black Wire Clips



30 Days Seller Warranty



TAN YI is committed to providing all customers with higher quality products and 100% satisfactory shopping experience.

We also offer 24-hour online customer service. If there are any questions about our wire holders, you will receive a full refund or free replacements within 30 days.

• 【Self-Adhesive Clips】 Our cable holder clip comes with a strong adhesive pad that adheres to any flat and dry surfaces such as glass, metal or wood desks, tables and walls. Easy to remove without any residues and damage.
• 【Set of 50pcs】This package includes 50pcs black sticky cable clips, suitable for the wire diameter within 0.26 inch. Perfect quantity and size to meet your daily use requirements.
• 【Strong & Durable】These wire clips are made of high quality eco-friendly PA66 material which is built solidly for long service life. Besides they are compact, space-saving, and portable for anywhere.
• 【Wide Application】They are super useful for organizing various cables including network cables, computer cables, USB cables, TV cables, Christmas lights cables, etc. Widely used in home, office and car.
• 【Easy to Install】 You’d better press all 4 corners to make it more adhesive and stable, then use it 2 hours later. It will do a good job to hold up cables and keep wires all tightly.

User questions & answers

Question:	Are the transparent clips fully transparent including the adhesive? The photos show a red base
Answer:	The red base is the removable cover on the adhesive
Question:	If you take one cord out to switch it with different one, will switch cause the clips to fall off
Answer:	No. The clips are secure enough to handle cord switching.
Question:	Is the cable clamp attached? Will it fall
Answer:	Of course not, the product has a strong bond and it sticks very firmly.
Question:	What gauge wire is this product best suited for
Answer:	Suitable for the wire diameter within 0.26 inch, for example, RG6 coaxial cable, outdoor extension cable, network cable, TV-coaxial cable, power cable, charging cable, USB cable, mobile phone charger, audio cable, wired headset, etc.

Product description

Monitor arm provides 7 1/2" of height adjustability on pole and extends 19 1/2" from the base. Monitor can rotate from landscape to portrait, tilt forward and back and move front to back for optimal viewing. Clamp and grommet mount hardware fits desks up to 2.36" thick. Weight capacity of 30 lbs., and monitor size ≤27", VESA MIS-D Compliant.

• Provides 7 ½" of pole height adjustability, 18 ½" height adjustability from the surface and extends 19 ½" from the base
• Dual-swivel arm allows for easy adjustment of monitor tilt, rotation and viewing distance
• Clamp and grommet mount hardware fits desks up to 2.36" thick
• For monitors up to 30 lbs. and ≤27"
• VESA MIS-D Compliant
• 3 year warranty

User questions & answers

Question:	Can the arm be lowered on the post? I need to extend the monitor out & down off the desk and low over a chair beside the desk
Answer:	Yes, the black arm can be positioned up and down on the silver post at any level.
Question:	What's the exact under-table depth clearance needed? (vertical plate against the table, how much does the clamp reach in?) 3M's diagrams are quite bad
Answer:	For a secure fit you can get by if the flat U shaped underside clamp plate is fully underneath and that's 1.75"w by 4" long. If your desk lip underside is only 1.75" you'll have a little difficulty turning the knob to tighten it but I was able to get it done.
Question:	does the arm have the ability to angle the monitor down? in other words, if I were laying on the ground, looking up at the ceiling, could i use this
Answer:	It can angle up and down but it can't go 90 degrees. It can't rotate completely flat because the bracket is attached to the back of the monitor. So yes it can rotate...if you were laying on the ground it wouldn't rotate that much for you to be able to see it. All normal desk functionality would be fine though.
Question:	What is the maximum height adjustment, misleading info in product details. See first comment for more info
Answer:	The post is 11" and the maximum extension of the arms is about 15". Taking the VESA mount into consideration, I am able to get the bottom of my 19" monitor about 21" off the desk.

Product features

Mechanical Adjust Monitor Arm (MA140MB)

Monitor arm provides 7 1/2 inch of height adjustability and extends 19 1/2 inch from the base. Monitor can rotate from landscape to portrait for optimal viewing. Clamp mount hardware fits desks up to 4 1/4 inch thick and grommet mount hardware fits desks up to 2 1/4 inch thick. Weight capacity of 30 lbs VESA MIS-D Compliant.

MA140MB Dual Swivel Monitor Arm

Free up space on your desk and move your LCD monitor into the best ergonomic position for viewing or out of the way when not in use.

Product description

** this remote case in the tv mount box, please open tv mount box and take out remote case **



Auswaur Compatible with Apple TV 4 4K Wall Mount and Remote Control Cover Compatible with Apple TV 4 / Apple TV 4K



Package Includes:

1* Wall Mount Compatible with Apple TV 4th

1*Black Remote Case

2*Screws

2*Wall Anchors

2*Double-Sided Adhesive



How to use:

1.Mark the position where the mount needs to be installed,and the distance between the two holes in the mount.

2.Using the drill to drill,install the wall mount.

3.Put apple tv into the mount.



Tips:

1.Compatible with Apple TV and remote not included.

2.The Adhesive is ONLY for auxiliary purpose of attaching the mount to wall or to the back side of TV,it's recommended not to use it for poorly painted walls and walls that drops powders or peels away easily.

It's recommended to use the come-with Wall Anchors as they are sturdy and reliable.

• WALL MOUNT: The Auswaur Wall Mount allows you to attach your Compatible with Apple TV 4 / Apple TV 4K to a wall.
• PERFECT FIT:Perfect for wall mounted TVs
• EASY TO INSTALL: Everything you need to attach the Auswaur Wall Mount is included. It is very easy to install. Simply attach, insert and connect.
• REMOTE COVER: This silicone case is specifically designed for the 4th generation Compatible with Apple TV Remote Control. Simply slide your remote control into the cover. It will fit like a glove.
• CONTENTS - 1 X Wall Mount Compatible with Apple TV 4 (Compatible with Apple TV 4th Generation / 4K Generation Only) ; 1 X Black Silicone PROTECTIVE CASE for REMOTE; 2 X Screws ; 2 X Wall Anchors.

User questions & answers

Question:	does is work with 3rd generation
Answer:	Hello, the diameter of this circle is 1.9685039inches, Package Dimensions is 6.5 x 5.5 x 0.3 inches
Question:	What is the material this mount made of
Answer:	Hello, this is produced by 3M Company in the United States. Adhesive pad that can be pasted on both sides.
Question:	Does the remote still work if the device is pointed down
Answer:	I used them on a rifle and they work fine. Be aware they are plastic and not durable as iron. They fit on my rail nicely and are easy to adjust. The small peep hole is a bit small for me but it’s manageable. The large peep hole is fine.

• DELUXE mount for Apple TV. (Apple TV and remote are not included.)
• PERFECT for wall-mounted televisions. (Attaches Apple TV to the back of your television.)
• COMPATIBLE with ALL Apple TVs (including the new Apple TV 4K, Apple TV HD, and the 2nd, 3rd, and 4th Apple TV generations).
• INCLUDES many premium, patented features including three mounting options: innovative hooks for TV vents, special adhesive for elevated TV temperatures, and screws for wall mounting.
• TOTAL MOUNT is the trusted leader in media-player mounting. With a passionate team headquartered near Seattle, over 40 patents, and a long history of quality since being founded in 2007, TOTAL MOUNT consistently delivers reliability and premium features.

User questions & answers

Question:	Can this be used on any tv
Answer:	Hello, If you have enough space for the mount, then it will work in an RV. However, there currently isn't a locking mechanism. The mount is controlled by tension and gas springs. While I can't suggest using it in an RV, I will say that we've had customers report that their MantelMounts and TVs survived the recent earthquake in Alaska (2018 7.0 magnitude). :D -MantelMount Team
Question:	Can this accommodate the size of the 64GB 4th gen
Answer:	Hello Katherine,The back of your TV will be 5.39" from the wall, when in the up position. -MantelMount Team-
Question:	How much room do you need to have between your tv and the wall in order to fit this mount to your tv
Answer:	Hello, You can mount a center speaker. However, you are going to need a 3rd party universal attachment. Something like the attachment in the link below will work. https://www.amazon.com/Sewell-Direct-Universal-Soundbar-Bracket/dp/B00823170Y/ref=sr_1_1?ie=UTF8&qid=1502299725&sr=8-1&keywords=sewell+direct+universal+soundbar+bracket -MantelMount Team-
Question:	If you mount the apple tv behind your television does is have trouble "reading" the remote signal
Answer:	Hello Nancy,If you have to mount the wall plate off center in order to catch two studs, that is fine. You can move the lifting mechanism/TV 6 - 8" to compensate for mounting the wall plate off center.-MantelMount Team-

Product description

Pinowu Wall Mount Bracket and Protective remote case for Apple TV 4 Gen/ 4K (5 Gen)



Practical Wall Mount

This Wall Mount allows you to attach your Apple TV 4 / Apple TV 4K box

to a wall or to the back of your apple TV.

Full Access to your TV Box.

Remote Protective Case with Lanyardl

The Protective silicone case is for Apple TV 4/4K /5th Siri remote controller to anti dust,

with a hand strap to anti-slip or not lose.



Premium Material

1)The wall mount holder is made of Premium Acrylic, looking very elegant and durable. 

2)The remote cover is made of non-slip silicone material,

will not only prevent the remote control from slipping out of your hand,

it will also prevent it from disappearing in your couch or sliding off an arm rest.



Specification

Mount Size: 4.4x3.3x1.6 inch (105x85x40mm)

Mount Material: Plastic

Remote Cover Size: 4.9x1.6 inch (125x40mm)

Remote cover material: Silicone



Warm Tips:

the adhesive tapes may not support for long time mounting,

as the apple tv box has a weight of 15oz (425g),

Here we had better to install it by the screws and wall Anchor Plugs.



Lifetime Warranty

You are covered by lifetime warranty, no worry about replacement and refund,

money back guarantee only if you are not completely satisfied with Pinowu TV Mount and Remote Cover.



Package Included:

1 x Wall Mount for Apple TV 4 / Apple TV 4K (Black)

1 x Silicone Cover for Apple TV4 Remote (Black)

4x Screw + Wall Anchor Plug 

2x Strip of Double Sided Adhesive Tape 

1x Hand Strap (Black)

• [PRECISION DESIGN] - This wall mount bracket is specifically designed for Apple TV 4th Gen and 4K, also fit for Apple TV 5th Gen, but NOT compatible for Apple TV 1,2, or 3. Full access for your TV box, Bluetooth remote still works.
• [PROTECT TV BOX FROM ACCIDENTS] - We all know sometimes pets, small children, and beverages are not best friends with your expensive electronics! So wall mount your 4th Generation Apple TV, and keep it safe out of reach from danger!
• [SILICONE REMOTE COVER WITH LANYARD] - The remote sleeve compatible for Apple TV 4/4K, works great for scratch protection and anti- drops, makes the remote easier to grip and less likely to slide. Practical with handy strap.
• [SPACE SAVING ORGANIZATION] - Do you HATE looking at cords and wires? Make organizing your TV area easy by securely wall mounting your Apple TV 4th generation.
• [TWO INSTALLATIONS WAY] - Everything you need to attach the Wall Mount is included. You can either choose the double sided adhesive tapes to paste that mount bracket or the screws and wall Anchor Plugs to install. We highly suggest you to use screw way which can last long (Apple TV and remote are not included)!

User questions & answers

Question:	Is this made of metal
Answer:	This is a great question! Basically the Apple TV communicates with the remote via radio frequency rather than infrared that you might be used to with your tv. What does that mean? Well you can be 3 rooms away and the Apple TV will still receive input from the remote! So mounting the unit even behind the tv, completely out of sight should be fine. Please note that the Apple TV remote can be set up to change the volume on your tv via infrared (thus the ir transmitter on the front of the remote) but that won’t be effected by the Apple TV being mounted out of sight. Hope that helps!
Question:	Will this fit 2nd generation AppleTV
Answer:	4”x4”
Question:	Does the wall mount have padding on the inside to protect Apple TV from scratching
Answer:	Not if it has the Siri remote.
Question:	If you put this behind your tv. does the remote still woke dienthr apple tv
Answer:	Yes,no problem

Product features

Warm Notice

The adhesive tapes may not support for long time mounting, as the apple tv box has a weight of 15oz (425g), Here we had better to install it by the screws and wall Anchor Plugs.

Pinowu Wall Mount and remote case for Apple TV 4 Gen/ 4K (5 Gen)

• Do you HATE looking at cords and wires? Make organizing your TV area easy by securely wall mounting your Apple TV 4th generation.
• This Wall Mount allows you to attach your Apple TV 4 / Apple TV 4K box
• The Protective silicone case is for Apple TV 4/4K /5th Siri remote controller to anti dust
• Practical with handy strap: prevent the remote control from slipping out of your hand

Pinowu Wall Mount and remote case for Apple TV 4 Gen/ 4K (5 Gen)

• Do you HATE looking at cords and wires? Make organizing your TV area easy by securely wall mounting your Apple TV 4th generation.
• This Wall Mount allows you to attach your Apple TV 4 / Apple TV 4K box
• The Protective silicone case is for Apple TV 4/4K /5th Siri remote controller to anti dust
• Practical with handy strap: prevent the remote control from slipping out of your hand

Pinowu Wall Mount and remote case for Apple TV 4 Gen/ 4K (5 Gen)

• Do you HATE looking at cords and wires? Make organizing your TV area easy by securely wall mounting your Apple TV 4th generation.
• This Wall Mount allows you to attach your Apple TV 4 / Apple TV 4K box
• The Protective silicone case is for Apple TV 4/4K /5th Siri remote controller to anti dust
• Practical with handy strap: prevent the remote control from slipping out of your hand

Pinowu Wall Mount and remote case for Apple TV 4 Gen/ 4K (5 Gen)

• Do you HATE looking at cords and wires? Make organizing your TV area easy by securely wall mounting your Apple TV 4th generation.
• This Wall Mount allows you to attach your Apple TV 4 / Apple TV 4K box
• The Protective silicone case is for Apple TV 4/4K /5th Siri remote controller to anti dust
• Practical with handy strap: prevent the remote control from slipping out of your hand

Durable Material

The wall mount holder is made of Premium Plastic, looking very elegant and durable. Mount Size: 4.4x3.3x1.6 inch (105x85x40mm)

Two way to Install

• The double sided adhesive tapes to paste that mount bracket
• the screws and wall Anchor Plugs to install.
• We highly suggest you to use screw way which can last long.

Protect TV Box from Accidents

Sometimes pets, small children, and beverages are not best friends with your expensive electronics! So wall mount your 4th Generation Apple TV, and keep it safe out of reach from danger!

Anti-slip Remote Cover

The remote cover is made of non-slip silicone material, will not only prevent the remote control from slipping out of your hand, it will also prevent it from disappearing in your couch or sliding off an arm rest.

Remote Cover Size: 4.9x1.6 inch (125x40mm)

Package Included:

• 1 x Wall Mount for Apple TV 4 / Apple TV 4K (Black)
• 1 x Silicone Cover for Apple TV4 Remote (Black)
• 4 x Screw + Wall Anchor Plug
• 2 x Strip of Double Sided Adhesive Tape
• 1 x Hand Strap (Black)

Product description

PERFECT FOR WALL-MOUNTED TV OWNERS - People with wall-mounted televisions often wonder where to put their new Apple TV. One option is to tunnel an HDMI cable through a wall to an entertainment center, but this option is too destructive and time-consuming for most people. Another option is trying to balance the Apple TV on a fireplace ledge, which can lead to the Apple TV crashing to the floor the first time someone isn't careful around the TV. For wall-mounted TV owners, the solution to the installation problem is simple: ReliaMount attaches Apple TV to the back of the television. This ReliaMount is compatible with all Apple TVs (including the new Apple TV 4K and the 2nd, 3rd, and 4th Apple TV generations).

• ATTACHES APPLE TV TO THE BACK OF YOUR TELEVISION using a special adhesive that is formulated for the elevated temperatures of televisions. Perfect for televisions that are mounted to a wall.
• HOLE-FREE INSTALLATION - Attaching Apple TV to the back of your television eliminates the need to drill holes in your wall. Installation is simple and does not require tools
• COMPATIBLE with ALL Apple TVs (including the new Apple TV 4K, Apple TV HD, and the 2nd, 3rd, and 4th Apple TV generations).
• Apple TV is not included.
• ReliaMount - Quick and easy Apple TV installation.

User questions & answers

Question:	What is the best way to remove the mount (without damaging my tv) when I no longer want it there
Answer:	No worries plastic on plastic does not scratch I've had mine forever well at least since the new Apple TV came out and no problem
Question:	Will an older generation Apple TV fit
Answer:	yes, the remote still works well if put the TV box behind TV, many buyers tried, no complaint
Question:	Can I get more of the adhesive somewhere? I took the mount off my tv to put on another. it's useless now
Answer:	I imagine it would most likely stay in, but it would be very loose due to the difference in size between the two units. The remote case also definitely will not work with a 3rd gen Apple TV. If your remote is aluminum, it will not fit properly.
Question:	Does the apple tv remote still work, if it's hidden behind the tv
Answer:	this mount made of plastic

Product features

Additional Information

• Attaches Apple TV to the back of your television using a special adhesive
• Compatible with all Apple TVs (including the new Apple TV 4K and the 2nd, 3rd, and 4th Apple TV generations)
• Perfect for TVs that are mounted to a wall
• Apple TV not included

• ✅ 【DESIGN】 Avoid losing your Apple TV remote. Keep it secure and charged in the Apple TV Remote Holder. Two options are available for installation.
• ✅ 【USE GEL PAD TO INSTALL】 Remove the gel pad film and attach it to the TV (side or behind) or a flat wall. There is no stickiness on the wall or tv surface after you remove the gel pad. It can be reused by washing it with wet tissue or water.
• ✅ 【USE SCREWS TO INSTALL】 In case your wall is not flat, you can use screws to attach the apple tv remote holder anywhere you want. Screws are included.
• ✅ 【COMPATIBILITY】 elago Apple TV Holder is compatible with Apple TV Remote 4th Generation [4K]. It can be used with elago Apple TV Remote Covers and elago lightning cables.
• ✅ 【WARRANTY】 Purchase with confidence! 30-days 100% Money Back Guarantee & 1-year replacement warranty. - Apple TV, Apple TV remote, and lightning cable are not included.

User questions & answers

Question:	what are the dimensions of this? I need it for a ceiling fan remote. I see package dimensions but I would like the holders dimensions
Answer:	Technically, the AppleTV 4K remote is not RF. It uses both Bluetooth and IR. It communicates with the AppleTV box via Bluetooth, but has IR built in in order to work with TVs and other equipment that requires IR. I mounted mine on the back of my TV and while it works, it definitely is not working as well as it did when it was visible. However, I did not mount it near the top or bottom of my TV. I think if I had done that, I would not be having any problems.
Question:	What’s the difference between the R1 case and R2 case
Answer:	It isn't...I think it's ABS plastic...in any case, the plastic is very strong and if you're gentle with putting the Apple TV in, it won't scratch it at all!
Question:	Is there a similar one in white
Answer:	Yes it does.

Product features

DESIGN

Avoid losing your Apple TV remote. Keep it secure and charged in the Apple TV Remote Holder. Two options are available for installation.

WASHABLE GEL PAD

elago Apple TV Remote Holder gel pad is washable. If it becomes contaminated, it can be washed with water, and semi-permanent use is possible.

• Step. 1 : Wash with water.
• Step. 2 : Dry gel pad.

COMPATIBILITY

elago Apple TV Holder is compatible with Apple TV Remote 4th Generation [4K]. It can be used with elago Apple TV Remote Covers and elago lightning cables.

Product description

A simple tool to keep you organized.

Come with 100 pieces in total, strong adhesive make it grip firmly.



【EASY TO USE】

No need to punch a hole or attach any screws. Creative approaches is available as you like to utilize them, such as hanging necklace, hand chain, etc.



【PRACTICAL】

Cable clip holders come to be extremely functional, keep your place neat and organized, clean and tidy environment makes you at ease



【HIGH QUALITY】

Strip light mounting brackets made of plastic and adhesive, small and lightweight, easy for you to install the place you want.



【BEAUTIFUL】

The color of the command cord clip is white, which is easy to hide in the environment and does not affect the overall appearance of the strip light strip.



HOW TO USE: 

1. Clean the surface such as glass, plastic, metal, porcelain or anywhere you would like to place cable clips on from dust; 

2. Peel off the sticker, paste them on the surface, press stably for 5-7 seconds; 

3. Do not put any weight on them for the first few hours after pasting; 

4. Put the cables into the clips and lock them in place. 



Specification: 

Size: 13 * 10 * 5 mm(LWH) 

Color: white 

Applicable cable size (Max.): 10 * 2.5 mm (WH) 

• Size and Quantity: The package comes with a total of 100 pieces light strip brackets measuring approximately 13 * 10 * 5 mm inches. No punching or any screw mounting is required to help you organize all the small cables.
• Strong Adhesive: 3M Adhesive is the best adhesive pad that holds the light bar securely. Led adhesive clips help to clean up the messy wires on the floor or table, save space and maintain a clean and orderly environment.
• Quality and convenience: These innovative viscous stick on cable clips are made of high-quality plastic materials with a long-term temperature resistance of 90 degrees. Self-adhesive, easy to use, creative approach is available as you like to utilize them.
• Uses: Suitable for WATERPROOF and NON-WATERPROOF 3014/3528/5050/2835/5630/5730 SMD LED strip light within 10mm(3/8") wide, Christmas light cable, earphones, car cable management.
• Applicable surfaces: Led strip lights holder can be glued to clean, smooth surfaces such as glass, metal, porcelain, wood, etc. Make sure to wipe with alcohol and clean the surface to ensure a firm bond.

User questions & answers

Question:	do these come off cleanly or do they pull surface paint off, etc
Answer:	My unit eventually fell off the back of my TV. Scared the heck out of me! I went to the local hardware store and bought heavy duty Velcro tape. A piece on the TV, and a piece on the mount. I let it sit overnight before sticking the mount back on the TV. It’s been over a month now, and so far so good

Product description

Contemporary design with stacking columns raise the monitor from 1 inch to 5 7/8 inches in increments of 1 5/8 inches to an ergonomically correct level. Features extra wide 16 inch storage space underneath to maximize desk space. Great for laptops, printers or monitors up to 40 lbs. No-skid base keeps stand in place.

• Contemporary design with stacking columns raises monitor from 1" to 5 7/8" in increments of 1 5/8" to an ergonomically correct level
• Features extra wide 16 inch storage space underneath to maximize desk space
• Great for laptops, printers or monitors up to 40 lbs
• Non-skid base keeps stand in place
• Silver/Black

User questions & answers

Question:	Is the side to side space between the legs 16" on both the 16" and 20" model
Answer:	No
Question:	In each of the 3 postions, lowest, middle and highest, how much clearance is there under the stand
Answer:	I have mine in the lowest position...the clearance is 1 3/4". I have a skinny blue-ray player under it.
Question:	Can I use it with my 27" iMac, which weighs about 30 pounds? I saw one bad review for it, but wonder if others have used it with an iMac. Thanks
Answer:	the problem is not the weight but the size of your iMac. The computer I have sitting on it is 20 inches wide and it just fits on it. So I would suggest you find another stand that is large enough to hold your iMac.
Question:	Is it possible to buy extra legs or extra pieces? I would like this to be one tier higher
Answer:	Not that I'm aware.

Product features

Extra-Wide Adjustable Monitor Stand (MS90B)

Set your computer monitor at an ergonomically correct height and maximize desk space with the 3M Extra-Wide Adjustable Monitor Stand. This monitor stand features a contemporary design with stacking columns, letting you choose the ideal height for your monitor. And with ample clearance between the stacking columns, this stand provides plenty of room to fit a laptop or other supplies beneath. A non-skid column base and 40 pounds of support help ensure your monitor or other electronic devices rest securely while you work.

• Made of high quality materials, practical, durable, non-toxic and tasteless. Strong toughness, high tensile strength, wear resistance, heat resistance and corrosion resistance
• This product has strong adhesion to any clean and smooth surface, such as plastic, wood, glass, metal, rubber, etc
• Black tie can be adjusted according to your needs. If the self-adhesive pad fails, the tie can be fixed by screw
• It can be used for power cord, Festival lights, wire, cars, etc. to solve the problem of too many and too confused wires for you
• Fifty fixed base, fifty adjustable zipper belts, fifty 3M superglue and fifty screws are built in the package

User questions & answers

Question:	What is the tensile strength of the zip ties
Answer:	It will depend on the product you purchase.
Question:	What is the width and depth of the slot for the cable on these clips
Answer:	They come out clean. No paint or glue residue left behind.
Question:	What is the dimensions of the base
Answer:	My tv came with a cellophane film. I left a piece of the cellophane on the back of my tv and stuck my the mount there. So far has stuck on there. You many no longer have this option ..
Question:	What is the diameter of the largest bundle (or cable) this product can accommodate? By my calculations, it’s 1.0” to 1.3” in circumference
Answer:	Hi Jeremy. Thanks for your question. This mount is tailored to fit the new Apple TV exactly, but the mount is also compatible with older Apple TVs. Several TotalMount products provide an exact fit for older Apple TVs. All the best, Innovelis Customer Care