14 best electric nail hammer

Product description

The Freeman PMPN Pneumatic Mini Palm Nailer with Magnetic Tip is a small yet powerful air hammer to assist you in your hammering needs. There is no need to swing a hammer in tight spaces or hard to reach areas. This palm nailer is compatible with 6D-16D nails fron 2" to 3-1/2". A magnetic tip allows you to place the nail in the tip of the gun, place it where you want to drive the nail and apply light pressure, letting the nailer do the work for you. Other convenient features of this nail gun include a comfortable rubber grip design, an ergonomically engineered body great for extended use, and an internal air filter and anti-dust cap to keep debris out of the tool. The Pneumatic Mini Palm Nailer with Magnetic Tip is a lightweight, durable and easy to use tool to assist in your building needs.

• Nailed It: The Freeman PMPN Pneumatic Mini Palm Nailer with Magnetic Tip is a small but powerful hammer to assist you when working in tight spaces and hard to reach areas. It's lightweight with an ergonomically designed body and can handle nails from 6D to 16D, and up to 3-1/2".
• Pro Design: This powerful and durable palm nailer features high quality internal parts and a lightweight, ergonomic design weighing in at under two pounds. It comes with everything you need to hammer in hard to reach places, with air tool oil and adjustment tools included.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	Does it come with a sample supply of nails
Answer:	No Unfortunately does not come with a sample box of nails.
Question:	I see it's magnetic for holding nails but will this work with 1 1/4 inch aluminum nails (not magnetic) to install trim
Answer:	Yes you can, but the magnet wont hold the nail. You will have to hold the nail by hand or with pliers (1 1/4 is a little short) until you get it started and then you can remove your hand/pliers and finish driving it with the nailer. The nailer activates by holding pressure down on the nail top with the nailer.
Question:	Can this be used with 1-1/2" nails? Amazon says "up to 3-1/2 inch nails" but Freeman website says
Answer:	I think it should be ok for 1 1/2", but it's difficult for 4".
Question:	Dies it hold up pretty well? How about if pressure briefly gets high? - (accidentally ruined
Answer:	I'm not sure about the pressure problem. I only use mine for hanger nails or toe nails in tight spots. Sounds like you need a new pressure regulator more than a new tool.

Product description

Safety Nailer Mini Nailer provides stability for the fastener allowing the fastener to be installed straighter in the member and reduce the buckling tendency of the fastener as it is being installed. The Safety Nailer Mini Nailer is coupled with magnetics. The magnets allow the fasteners to not fall out of the device during open and closing of the Nailer. When working at heights and holding up materials the fastener will not fall out of the Nailer allowing for a more efficient work operation. In the event of working with non-magnetic fasteners the magnets on each side of the device will attract to each other preventing the non-ferrous fastener from falling out. Straps are stretchable and one size fits all. Straps are designed to only be strapped to your index finger while you open and close device with your thumb. Straps allow for the user to have the Nailer loaded with a fastener and rotate the Nailer on the backside of finger. This allows user to use both hands freely while Nailer is on his hand for other work. Used to install Fasteners to include Nails, Screws and Staples larger than 1/2 inches in height. The Safety Nailer Mini Nailer is designed ambidextrously, allowing both left and right-handed people the same advantages. The 180-degree hinge allows the user to fully open the device to grab a fastener out of a bag or off the ground utilizing its magnetic forces to place the Fastener in the groove. The striking plate allows the user to protect their fingers from a bad swing of the hammer, or a drill that falls over sideways when trying to start a screw. Our Hand Nailing Products have multiple size grooves for multiple sized fasteners. Safety Nailer Mini utilizes the patented technology found in the following utility patent. Safety Nailer LLC has exclusive rights to the following patent. Safety Nailer is a Registered Trademark. U.S. Pat. No. 8,806,983

• Innovative new product makes a great gift
• For finish nails, small screws, and staples
• Strong Neodymium magnets hold the fastener for you
• Made to be ambidextrous
• One size fits all elastic band

User questions & answers

Question:	This item requires special handling and cannot be shipped to your selected location." What possible special handling could there be
Answer:	For me it worked well with all wires types but the electrical staples, nails or fasteners that have flat sides were difficult to hold with the safety holders. I had to change my technic of nailing wires. It did not go as fast but I wasn’t hitting my fingers, which was the reason I bought the safetynailers.
Question:	Is there a set of two? One large and one small
Answer:	If it’s $19.99 you have a 2 pack in your cart. Not the one pack.
Question:	Will the safety nailer work on electrical wires that are rectangular in size? The picture illustrates a "round" piece of romex. Room for 14/2 wire
Answer:	A very fine grit Emory board (for fingernails) works great for plastic models and such.
Question:	What is going on? Put in cart for $9.99, canceled and went back to check status, Why was price doubled that quick to
Answer:	Item says 5 sheets total.

Product description

Plastic Pliers, Home Tool Auxiliary Pliers, Jelanry Secure Nails Anti-smashing finger Joint Pliers for More Safety for Hammering Nails



Multi-function Pliers:

The different diameter of the grooves on the pin can be fixed with different specifications of nails.

Safe Pliers:

Use the pliers to fix nail instead of manually fixing nails to prevent hitting fingers or hand while hammering

Portable Pliers:

Only 130 g weight, size: 244X59X46mm

Useful & Unique Design:

Flat base, easily to use, stable and strong handle for gripping

Family Essential Tools:

Safety pliers make your life much easier and safer

Package including:

1 X Plastic Pliers

• Multi-function Pliers: The different diameter of the grooves on the pin can be fixed with different specifications of nails.
• Safe Pliers: Use the pliers to fix nail instead of manually fixing nails to prevent hitting fingers or hand while hammering.
• Portable Pliers: Only 130 g weight, size: 244X59X46mm
• Useful & Unique Design: Flat base, easily to use, stable and strong handle for gripping.
• Family Essential Tools: Safety pliers make your life much easier and safer.

User questions & answers

Question:	wouldn't I Be better off nailing with needle nose pliers or channel locks for durability
Answer:	It is not recommended to place screws in the plier because the plier is made of plastic. The plier has different hole sizes for different nail sizes.
Question:	Can I use this for Roofing nails to do a roof? Does it have a slot that is thick enough? what are the slot thicknesses
Answer:	One word answer: YES A versatile tool, wish I had one years ago.
Question:	Does it hold screws in place too
Answer:	There shouldn’t be anything special. Not sure why amazon is marking it that way for you. These can also be bought from our website.
Question:	Will it hold thise super small nails fir picture frames
Answer:	Yes If you click on the on the Safety Nailer as the sellers name. There is a combo pack listed. Where it has the small and large one.

Product description

The product is easy to use

From the Manufacturer

The M12 Palm Nailer provides a portable solution to professional nailing applications without the hassle of an air compressor or hose. The compact size takes this tool places unreachable by a tradition nail gun, while the powerful impacting mechanism handles the most difficult of tasks. The M12 Palm Nailer also features an onboard fuel gauge, LED work-light, and a convenient hand strap to ensure the highest level of safety and productivity for the user.

• The product is easy to use
• The product is durable
• This product is made of high quality material
• Voltage 12-volt, BPM 2700 BPM, blow energy 2.2 feet/lbs, collet capacity 6D-16D
• Height: 6-1/2-Inch, length: 7-1/2-Inch, width: 2-1/2-Inch, weight: 3.4 lbs
• LED light - Yes, Battery Red Lithium, Magnetic Tip - Yes, Tool bag - Yes, Hand strap - Yes
• Warranty: 5 years
• Includes: 2458-20 Palm Nailer, M12 Red Lithium Battery, 30 minute charger, Hand strap, Tool bag

User questions & answers

Question:	Would this be good to drive in finish nails on hardwood floors up against tight walls
Answer:	No
Question:	It appears this nailer cannot go as low as 1” (2d) silicon bronze ring shank nails used in marine? Is this correct
Answer:	We would like to send you information from the manufacturer, hope you can help. This product has not been used yet and is very new. Product Summary The Milwaukee® M12™ Cordless Palm Nailer Kit provides a portable solution to professional nailing applications without the hassle of an air compressor or hose. The compact size takes this tool places unreachable by a tradition nail gun, while the powerful impacting mechanism handles the most difficult of tasks. The M12 palm nailer also features an onboard fuel gauge, LED worklight, and a convenient hand strap to ensure the highest level of safety and productivity for the user. What's Included (1) Palm nailer, Model# 2458-21(1) Hand strap(1) M12 lithium-ion battery(1) M12 battery charger(1) Carrying bag Features + Benefits 6D–16D magnetic collet securely holds framing nails for one-handed use All metal gear housing handles tough jobsite conditions Palm style ergonomics delivers superior comfort and control Powerful mechanism delivers 2.2 ft.-lbs. of blow energy LED light illuminates work surface Battery is compatible with over 25 M12 tools Delivers 2700 BPM Drives 16D nail in under 2 seconds Drives up to 100 16D nails per charge Drives up to 200 strap nails per charge Key Specs Item# 14051 Brand Milwaukee Manufacturer's Warranty 5 year limited warranty Ship Weight 5.96 lbs Volts 12 Gauge 6D–16D Battery Type Lithium-ion Batteries (qty.) 1 Dimensions L x W x H (in.) 7 1/2 x 2 1/2 x 6 1/2 Tool Weight (lbs.) 3.4 Storage Type Contractor bag
Question:	Could this tool be used to hang vinyl siding
Answer:	ViseGrips would be better. Using a nail gun would be the quickest way to finish a job.
Question:	Can it use regular nails, like duplex nails or 8 and 16 penny nails
Answer:	The tool could be used for a VERY SMALL roof job! You must use 2-hands to place a nail into the tool, then position the loaded tool on the shingle, and swing the hammer to drive the nail. After the nail penetrates the shingle and is gripped in the sheathing, you must open the tool, slide it away, and finally drive the nail home. Awkward, but no smashed fingers! The nail-grip hole range from #19 (0.166") dia. x 5/16" high and #19 (0.166") dia. x 1-1/8" high. The smallest hole is #55 (0.052") dia. (For a small model roof?!)

Product description

ELEC STAPLE/BRAD NAILGUN. Stanley Hand Tools is a brand of hand tools. It is a division of Stanley Black & Decker, following the 2010 merger of The Stanley Works with Black & Decker

The heavy-duty design of the Stanley TRE550 Electric Staple / Brad Nail Gun delivers outstanding driving power for a wide variety of jobs. The tool's dual power lever (Hi/Lo) is designed for use with hard or soft materials. A flush-nose design solves the problem of stapling in tight spots, while a contoured grip provides extra comfort on the job.

Versatile, durable, and designed to accomplish tasks efficiently.

The staple/gun also includes a anti-jam mechanism saves time on the job, a nose safety for safe operation of the tool, and an 8-foot power cord. This tools uses Stanley SharpShooter TRA700 Series or Arrow T-50 heavy duty staples and 1/2-inch, 9/16-inch and 5/8-inch brads.

From the Manufacturer

The heavy-duty design of the Stanley TRE550 Electric Staple / Brad Nail Gun delivers outstanding driving power for a wide variety of jobs. The tool's dual power lever (Hi/Lo) is designed for use with hard or soft materials. A flush-nose design solves the problem of stapling in tight spots, while a contoured grip provides extra comfort on the job.

Versatile, durable, and designed to accomplish tasks efficiently.

The staple/gun also includes a anti-jam mechanism saves time on the job, a nose safety for safe operation of the tool, and an 8-foot power cord. This tools uses Stanley SharpShooter TRA700 Series or Arrow T-50 heavy duty staples and 1/2-inch, 9/16-inch and 5/8-inch brads.

• Heavy-duty electric staple / brad nail gun with outstanding driving power
• Unique dual power lever (Hi/Lo) designed for use with hard or soft materials
• High Quality New!!!!!!!
• Includes 8-foot power cord
• Uses Stanley Sharpshooter TRA700 Series or Arrow T-50 heavy duty staples and 1/2-, 9/16- and 5/8-inch brads
• Heavy-duty electric staple / brad nailgun with outstanding driving power
• Unique dual power lever (Hi/Lo) designed for use with hard or soft materials

User questions & answers

Question:	UPHOLSTERy
Answer:	There seem to be reviews for multiple staplers. I purchased the TR250 and it does NOT come with staples. I do not know if the TR45K does or not.
Question:	what size staples did the gun come with? i read that it was 1000 of them, but what size? thanks everybody
Answer:	Yes - it is a (brad) nail gun as well. I use Arrow # BN1810 5/8" Brad Nails. This stapler takes 5 sizes of staples (1/4", 5/16", 3/8", 1/2" & 9/16") and 2 sizes of brad nails (1/2" & 5/8").
Question:	Does it come with staples or do I need to order that separately
Answer:	I wouldn’t. One slip and you’ll have a dent in your floor. I slipped with 1/4” plywood and it punched a hole through it.
Question:	is this a stapler and a nail gun? If a nail gun, what kind of nails do i use
Answer:	That is correct. The tolerance between the internal piston and the cylinder is so great that only large headed nails can be driven with it.

Product description

The DEWALT Electric Multi-Tacker loads a variety of staples and brads from heavy duty, narrow, cable, 18-Gauge brads and 18-Gauge headless brads. Due to the variety of staples and brads that the Electric Multi-Tacker is compatible with, there are numerous applications for this tool such as installing carpet, installing sheets of insulation and attaching lightweight trim using the brads, to name a few. This tacker is bottom-loading and makes loading user-friendly

• Brand New in box. The product ships with all relevant accessories

User questions & answers

Question:	Does anyone have an operators/owners manual? can you share it
Answer:	Sam's Dad. You realize that 5/8" is equal to 10/16" which is 1/16" larger than 9/16"; I wonder how your 9/16 did not fit but 5/8 did?
Question:	can it use 1.5 inch braid nails
Answer:	what size brads does it take
Question:	Can this use 1 inch t-nails
Answer:	Yes, this would work for chairs, upholstery - the staple size would allow for that. Also, the tension pressure is string enough to get through the fabric.
Question:	What size nails will it take
Answer:	No longer includes ANY staples at all.

Product description

The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.

• NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
• CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
• INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
• BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
• 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.

User questions & answers

Question:	Does this come with a charger
Answer:	This one does come with a battery & charger, but they sell a model without a charger
Question:	Would this tool work to repair my fence
Answer:	Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too.
Question:	Will it go through 1" oak trim
Answer:	yes
Question:	can i use multiple lengths of nails
Answer:	5/8 inch through 2 inch nails....awesome gun...i am so happy with it

Product description

Remember when you could build whatever you wanted? Nail nails and fasten fasteners with the WEN 18-Gauge 2-Inch Pneumatic Brad Nailer. Fire 18-gauge brads anywhere from 3/8 to 2 inches in length. Our spring loaded magazine makes for quick and easy reloads with enough space to hold up to 106 nails. The lightweight body combined with the rubber-lined handle limit fatigue during long days on the job. Operating pressure ranges rom 60 to 115 PSI with the nailer consuming 0.028 CFM of air per nail at 88 PSI. The 1/4-inch NPT air inlet allows for quick connection to your favorite air compressor. Adjust the firing depth of the nailer with the simple turn of the depth adjustment wheel. Check the amount of remaining nails through the gauge window mounted on the side of the magazine. Unlatch the front nose to clear jams quickly and easily. Adjustable air exhaust lets users direct the pneumatic air output in any direction while the powder-coated finish prevents wear and tear to the nailer’s body. This package also includes lubricating oil, hex keys, 500 3/8-inch nails, 500 3/4-inch nails, 500 1-inch nails, and 500 2-inch nails. And, because its a WEN product, your nailer comes backed by a two-year warranty and a friendly customer help line all to make sure you remember WEN.

• Shoot 18-gauge brads ranging from 3/8 to 2 inches in length
• Operate at 60 to 115 PSI with the 1/4-inch NPT air inlet fitting
• Features a depth adjustment wheel, a nail gauge, a rotatable exhaust, and a quick release 106-nail capacity magazine
• Hassle-free nose latch makes clearing jammed nails quick and easy
• Includes 500 18-gauge 3/8-inch nails, 500 18-gauge 3/4-inch nails, 500 18-gauge 1-inch nails, and 500 18-gauge 2-inch nails

User questions & answers

Question:	Can I use this to put on a board & batten wall? 3” strips, 1/2” thick
Answer:	Yes. It comes with various nail sizes to fit that job.
Question:	Does the one that comes with 500 nails include a case
Answer:	A case does NOT come with the WEN 61721 (with 500 nails option).
Question:	Es electrica o de compresora
Answer:	Con comprensión
Question:	Does this have a metal magazine? I have Hitachi that broke twice from light use due to magazine being plastic
Answer:	Yes the magazine is metal. This is a great tool

Product features

Hassle-free Nose Latch

The nose latch makes cleaning jammed nails quick and easy.

Adjustable Exhaust Port

Adjust the air exhaust to direct the pneumatic air output in any direction.

Depth Adjustment Wheel

Adjust firing depth of the nailer with a simple turn of the depth adjustment wheel.

Spring Loaded Magazine

The spring loaded magazine makes for quick and easy reloads and holds up to 106 nails.

Product description

These 1-1/4 in. X 9/16 in. Graphite metallic steel staples are designed to secure 14/3, 12/3 and 10/3 nm cables. These strong steel staples feature burr free, sharper tips so the legs drive in straight without splitting wood and are engineered with recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and manufactured to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.

• Application: 14/3, 12/3, 10/3
• Recessed head drives faster and protects cable insulation
• Pointed legs drive in straight to prevent splitting wood and feature sharp, burr-free tips offer easy starting
• Made from steel for strength with a graphite metallic finish
• Made in the USA

User questions & answers

Question:	how many
Answer:	30
Question:	Is this suitable for outdoor use/does it rust
Answer:	no but you should be able to get a pdf from dewalt website
Question:	How many staples does this come with
Answer:	No

• 【DURABLE DESIGN】- These are unique, solid quality products that offer world class performance.They are designed for instant welding of draw pins, molding rivets and for the 'shrinking' of stressed material.
• 【SUPERIOR SAFETY】- The machine thermal protection will work when the main transformer temperature gets to 95ºC. The safety is ensured.
• 【HEAVY DUTY SLIDE HAMMER】- Heavy duty construction with quick release chuck to grip pins firmly without slipping. Cast iron slide weight and comfortable vinyl grip.
• 【COMPACT&PORTABLE】- Super sensitive trigger in handle for one-handed operation. Easy to manage D handle design. With a case, it is lightweight hand-held auto body repair stud welder easy to use.
• 【WIDE APPLICATION】- For the repairing of metal elastic deformation, plastic deformation, direct damage(breakage, scratch, dents, and rust), as well as some of the indirect damage, targeting at some of the repairing work for damage caused by car collision.

User questions & answers

Question:	Does this work on Aluminum
Answer:	I'm not sure I don't believe so
Question:	Work with aluminum
Answer:	You screw the end on the stud/pin and it tightens onto it
Question:	Can this gun use threaded pins
Answer:	30
Question:	Does the slide hammer twist to tighten or does it have an wheel at the end that locks on to the stud
Answer:	I am not sure what type of iron is used, but they are very study. However I believe they would rust over time if used outdoors.

Product features

Great Performance

Solid quality products that for today's collision repair professional. They are designed for instant welding of draw pins, molding rivets and for the 'shrinking' of stressed material.

Thermal Protection

The machine thermal protection will work when the main transformer temperature gets to 95ºC. The safety is ensured.

Heavy Duty Slide Hammer

Heavy duty construction with quick release chuck to grip pins firmly without slipping. Cast iron slide weight and comfortable vinyl grip.

Compact & Portable

Super sensitive trigger in handle for one-handed operation. Easy to manage D handle design. With a case, it is lightweight hand-held auto body repair stud welder easy to use.

Complete Accessories Kit

Carrying Strap,Straight pad electrode,meson electrode,nails 2.0mm,nails 2.5mm,meson pad,straight ring,puling hammer,wavy wire electrode,nails electrode,nails lock In,nails lock out,shrinking electrode,wary wire,6-hook head.

Wide Application

For the repairing of metal elastic deformation, plastic deformation, direct damage as well as some of the indirect damage, targeting at some of the repairing work for damage caused by car collision.

800VA Auto Body Stud Welder

The spot welder holds stud in welder for easy out of position welding. Welds studs easier and faster. Super sensitive trigger in handle for one-handed operation and built in overload protection, you will find it is comfortable to use the welder.

• Satisfying Performance
• Thermal Protection
• Heavy Duty Slide Hammer
• Compact & Portable

Product description

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Compatible with all DEWALT 20V MAX* batteries
• Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
• Tool-free selectable trigger for sequential or contact actuation modes
• Low nail lockout prevents dry firing and unwanted marks on the work material

User questions & answers

Question:	Is this a straight brad nailer for 5/8"-2" brads or an angled finish nailer 1-1/4 thru 2-1/2 finish nails
Answer:	THIS IS A STRAIGHT BRAD NAILER. 5/8" - 2".
Question:	Is this the same battery of 20v max drill
Answer:	Yes. To my knowledge all "20V Max" tools from DeWALT use the same battery. I have several tools and all the batteries work with all the tools.
Question:	Please confirm this kit includes the charging unit, battery and bag
Answer:	Mine came w/ those items since it is a kit & not tool only.
Question:	Can i nail 2x4 with this im building a garage
Answer:	Are you being serious? I really hope not! If you are, do not build anything! This gun is designed to fasten trim to walls like baseboard, casing etc. A "framing gun" is designed for "framing"... Dewalt has battery framing guns, they're about $100 more. But don't buy one. Call a pro, have them build your garage.

Product description

This CRAFTSMAN V20 MAX 18GA cordless finish nailer's cordless design eliminates the need for compressors, hoses, or costly Gas cartridges. The motor delivers consistent power firing in various weather conditions and materials. The extensive runtime on a single battery and Fast shot speed allow for less downtime on the jobsite. The single tool-free depth setting makes adjusting your nail depth quick and simple, while the other tool-free settings make potential nail jams or stalls easy to fix. The cordless finish nailer is lightweight and well balanced, making this product very comfortable to use for prolonged time.

• CRAFTSMAN V20 MAX cordless nailer drives adhesive collated 18 gauge finish nails
• Fully cordless design eliminates the need for compressors, hoses or costly Gas cartridges
• Provides consistent firing power in various climate conditions and materials
• Tool-free depth settings for quick set up and consistent results
• Tool free jam and stall settings for ease of use and improved efficiency
• Lightweight with optimal center of gravity provide optimal balance and comfort in hand during use
• Contoured overmolded handle for added comfort during use

User questions & answers

Question:	Will DeWalt battery work
Answer:	No, the CMCN618C1 should only be used with the CRAFTSMAN battery.
Question:	Can this be used to attach wall panel to an old shipping pallet? I'm building a bar. Thanks
Answer:	Absolutely yes! I use this one every single day for my projects, shiplap, pallets, plywood, crown molding, etc. just be sure to get the right nail size and go ahead!!
Question:	Can this tool work with the Black and Decker 20 volt battery for the Matrix system
Answer:	No. The batteries for DeWalt, Black & Decker, Porter Cable, and Craftsman do not cross brands and are not compatible.
Question:	Does this unit come with a battery and charger
Answer:	Yes, The CMCN618C1 comes with one battery and one charger.

Product description

NEU MASTER Electric nailer/stapler is compatible with 3/8” crown staples (equivalent to Arrow T50 staples & Stanley TRA700) and 18 gauge brad nails (equivalent to Tacwise 18G, Arrow BN18, Bostitch 18G & Rapid no. 8 brad nails) of the following lengths: Staples – 8mm (5/16”), 10mm (3/8”), 12mm (1/2”), 14mm (9/16”) and 16mm (5/8”). Nails – 15mm (9/16”) and 16mm (5/8”) Voltage:110-120V/60Hz Rated Current:11A Rated Firing Speed: ≤20pcs/min Stapler/Nailer Type 50 8-16mm type F 15-16mm Wire Spec: 2M PVC cable UL plug

• FOR FREE: 336pcs staples and 200pcs nails
• ✨Friendly after-sale service--We provide replacement service instead of repairing.
• DIY -- The electric brad nail gun ideal for DIY projects, including upholstery, wooden handiwork and home improving project.
• SAFETY -- Contact safety switch prevents unintentional firing.
• POWER ADJUSTABLE -- The electric staple gun has adjustable power knob for hard or soft material.
• 2 in 1 STAPLE AND NAIL GUN -- Work with Staple T50 series or TRA700 series from 5/16" to 5/8" and 18 gauge brad nail from 1/2'' to 5/8''.
• EASY TO USE -- Easy magazine release for quick reloading.

User questions & answers

Question:	is it 220 v or 110 v
Answer:	110
Question:	Will this fit 1/2” staples
Answer:	Yes, it could fire 1/2” staples.
Question:	What length brad nails/staples does this take
Answer:	The tool works with Staple T50 series or TRA700 series from 5/16” to 5/8" and 18 gauge brad nail from 1/2’’ to 5/8''. If my answer is not clear, please feel free to contact [email protected] for further assistance.
Question:	Does this multi tool work well for Upholstery
Answer:	I am a 76 year old woman and used it by myself to cover a tuffet.

Product features

Features

DIY -- The electric brad nail gun ideal for DIY projects, including upholstery, Wooden handiwork and home improving projects.

SAFETY -- Contact safety switch prevents unintentional firing.

POWER ADJUSTABLE -- The electric staple gun with adjustable power knob for hard or soft material.

2 in 1 STAPLE AND NAIL GUN -- Work with Staple T50 series or TRA700 series from 5/16” to 5/8" and 18 gauge brad nail from 1/2’’ to 5/8''.

EASY TO USE -- Easy magazine release for quick reloading.

ACCESSORY -- This tool including 18 gauge brad nail 5/8'' x 200pcs; T50 staple legs 3/8'' x 336pcs.

Step 1

• Squeeze the bracket of pusher assemble and pull out it

Step 2

• Put the staple strip in the magazine with points up

Step 3

• Or put the brad nail closely to the left side of magazine with points up

Step 4

• Push the pusher assemble until it locked

Step 1

• Confirm the adjustable power knob is in Max. position

Step 2

• Put the gun on work surface, Depress the contact safety pole with one hand firmly placing on the top of tool

Step 3

• Once the contact safety pole is depressed, push the trigger to fire. You must pick up the tool and reactivate the contact safety for each shot.

Product description

Circle cable clips allow you to secure runs of round cables like coax to walls and floorboards for a cleaner look and prevent tripping over loose cables. Easy installation. Just use a hammer to nail then to your mounting surface. Great for retrofitting cables to rooms where in-wall installations are not an option.

• Circle cable clips allow you to secure runs of round cables like Coax to walls and floorboards for a cleaner look and prevent tripping over loose cables
• Easy installation
• Just use a hammer to nail then to your mounting surface

User questions & answers

Question:	Will cat7 Ethernet cable fit
Answer:	No, just the size of that nail.
Question:	Do these put large holes in the wall
Answer:	Easily, 14 gauge and 14 gauge outdoor rated cords too, which are thicker. They will hold the cord. I hove to so many hundred of these that I have lost count. Either for co-axial on the attic or for power cords under my 200 foot eave for lighting. They also work on wood siding.
Question:	Are these large enough to secure a standard (16 gauge), three prong extension cord
Answer:	These clips will only hold one coaxial cable firmly.
Question:	Will this hold a coaxial cable firmly or is it designed to hold multiple cables
Answer:	No, they can be used for plaster wall though.

Product features

Monoprice Circle cable clips with steel nail, 10mm, 100pcs/Pack

Circle cable clips allow you to secure runs of round cables like coax to walls and floorboards for a cleaner look and prevent tripping over loose cables. Easy installation. Just use a hammer to nail then to your mounting surface. Great for retrofitting cables to rooms where in-wall installations are not an option.