14 best linear gate openers

Linear gate openers are a type of electronic device used to control and automate the opening and closing of gates, typically for driveways, fences, and other access points. These gate openers are commonly used for residential, commercial, and industrial applications, providing convenience, security, and enhanced property aesthetics.

Key features and information related to linear gate openers and their associated accessories include:

Functionality: Linear gate openers are designed to remotely operate gates, allowing users to open and close them without the need for manual intervention. They are often used in conjunction with remote controls.
Remote Controls: Remote controls are handheld devices that allow users to wirelessly control the linear gate opener. They typically use radio frequencies (RF) to transmit signals to the gate opener. Remote controls are essential for users to conveniently access their property without leaving their vehicle.
Accessories: Various accessories are available for linear gate openers to enhance their functionality and security.These accessories can include:
- Keypads: Keypads allow users to input a security code to open the gate.
- Intercom systems: Intercoms provide communication between visitors and residents, allowing for remote gate control.
- Safety devices: Accessories like safety sensors and photo eyes are essential to prevent accidents and ensure the gate stops or reverses if an obstacle is detected.
- Battery backup: Battery backup systems ensure gate operation during power outages.
- Gate locks: Additional locking mechanisms can enhance security.
Audio Video Accessories: While not directly related to linear gate openers, audio-video accessories may be used in conjunction with gate systems for added security. This can include surveillance cameras and video intercom systems to monitor and communicate with visitors.
Supplies and Electronics: Linear gate openers require a power source, often low-voltage electricity, to operate. The electronics within the gate opener control the motor and other components to ensure smooth and safe gate operation.

Linear gate openers come in various types, including sliding gate openers and swing gate openers, depending on the gate's design and the user's requirements. These systems can be integrated with smart home automation platforms to provide additional control and security features, such as remote monitoring and scheduling.

It's important to select the appropriate linear gate opener and accessories based on the specific gate design, usage, and security requirements of your property. Proper installation and maintenance are crucial to ensure the reliable and safe operation of the gate opener system.

Below you can find our editor's choice of the best linear gate openers on the market

2 Pack 3089 Linear Multi-Code Remote Transmitter Gate Garage Opener Brand New

Based on 3 reviews Check latest price

Product description

Multi-Code Garage Gate Door Opener Model 308911 Pack 300 MHZ Frequency gate or garage door remote transmitter Replaces Multi-code model 1089 300MHz 10 Dip Switch Remotes Multi-code 3089 replaces Multi Elmac 3089 NOT A UNIVERSAL REMOTE

Multi-Code Garage Gate Door Opener Model 308911 Pack
300 MHZ Frequency gate or garage door remote transmitter
Replaces Multi-code model 1089 300MHz 10 Dip Switch Remotes
Multi-code 3089 replaces Multi Elmac 3089
NOT A UNIVERSAL REMOTE

User questions & answers

Question:	does it work for Clicker Clt1 Chamberlain
Answer:	I haven’t had the need to exchange the battery yet so I wouldn’t be able to tell. But I believe it’s a 9 volt.
Question:	I ordered the 2 pack but only got one. How can i contact the seller
Answer:	NO, this remote is intended to operate on a LiftMaster/Chamberlain/Craftsman that has a green program button on the back of the operator. The 61LM has 9 switches and are + , 0 , -
Question:	Is this a 10 pin
Answer:	It should tell you if it is compatible with your opener.
Question:	will this replace the
Answer:	should if you have a 10 digit code requirement

LINEAR DT Linear Delta Remote DNT00002A DTC DTA Transmitter Gate Garage Door Opener,Black

Linear

Based on 431 reviews Check latest price

Product description

One-button, one-channel, 9-volt battery powered visor transmitter with removable visor clip, 256 selectable codes.

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery supplied
RF frequency: 310 MHz

User questions & answers

Question:	is it Delta
Answer:	You need to press the program button on your gate/garage opener and then at the same time press one of the remote buttons.
Question:	Hello, i want to buy an extra remote but mine is model dtd, the one that you are selling is linear dt linear delta remote dnt00002a dtc dt will work
Answer:	No!
Question:	Is this a 8 or 10 code
Answer:	It can be used only with eagle operators that have the eg650 receiver. If you like to use it on the garage door as well you will need to buy an additional receiver eg650 as long as your garage door has a connection. Can’t be used with new LiftMaster garage doors
Question:	Is this a 8 or 10 code
Answer:	Yes it has a key chain

GTO / Linear Pro SW3002XLS Dual Automatic Gate Operator System

Based on 4 reviews Check latest price

Product description

An exciting time in the world of gate openers. GTO/PRO has rereleased their PRO-SW3000XL series of gate openers as the PRO-SW3000XLS series. The XLS series has a number of improvements over its predecessor including a 10% increase in the operating speed. The XLS series also contains a new rev-counter board with reed switch technology, which helps the gate opener determine its position. In addition, the XLS series includes an improved front mount and scraper seal design. Unfortunately, the new XLS series control boards and arms are not cross compatable with the XL series. So, if you purchase an XLS arm for your XL control board, they will not work together. The PRO SW3002XLS Dual Opener can be used in most residential applications including automating gates made of farm tubing, steel, aluminum, wood, and chain link, along with many other gate types. This opener can be set on the left or right and is used in the standard pull-to-open operation. By using the push-to-open bracket accessory the PRO SW3002 can be used to push the gate open away from the property with the arms still mounted on the inside. If using a round post angle iron can be used to extend the rear face of the post to accommodate the mounting bracket (available from GateCrafters.com in the related items to the left). The PRO SW3002XLS Dual Opener is a low voltage system, eliminating the need to run 110 AC to your gate. Simply run 16-gauge low voltage to a household outlet within 1000' of the operator or use a solar panel. The PRO SW3002XLS Dual Opener is made with longevity and compatibility in mind. It can be used with GTO inc.'s complete line of accessories including keypads, transmitters, exit wands, gate locks, solar panels, and more.

Compatible with most types of gates including chain link, wood, vinyl, and aluminum
Can operate a dual gate that is up to 16 feet and 650 pounds per leaf
Includes a receiver, transmitter, 12V 7ah battery, AC transformer, control board, control box and all mounting hardware for a post mounted installation
Low voltage unit that can be easily installed, comes with a 2 year warranty

User questions & answers

Question:	Does this unit contain the post mounting brackets
Answer:	It has 8 dip switches and is on frequency 310 MHz
Question:	Does this come with 2 Actuators for dual gate
Answer:	Juan M. This is an eight code product. It was very easy to set. Hope this helps, William L.

Linear DTC Delta 3 Remote Garage Door Transmitter

Linear

Based on 997 reviews Check latest price

Product description

1 button transmitter for garage door openers with Linear radio controls.310 Mhz frequency visor size remote control transmitter.8 Switches Code Set for easy programming.Compatible with ALL Linear/ Moore-o-Matic Delta 3 System products.Compatible with the Homelink System.Visor clip and 9V battery included, 1 year manufacturer warranty.

Visor mounting clip supplied
Power: 9 V battery
Frequency: 310 MHz
Codes: 256 (set by dip switches)
Dimensions: 2.16 x .95 x 3.75 inches

User questions & answers

Question:	What is the manufacturer's return policy if this doesn't work or if it fails within a year
Answer:	This unit comes with all the necessary hardware for installation.
Question:	Will this work as a replacement for the Linear MD
Answer:	yes it comes with 2 actuators,
Question:	Will this work for a Frantz CS 350 opener
Answer:	I'm sorry but I don't know about Delta 3. I use mine to open the drive-way gate into the parking area. Good luck, William
Question:	I have an older version of this clicker that operates at 300 MHz frequency. This one operates at 310 MHz frequency. Will it open my garage door
Answer:	Sorry but I don't know the answer to the question.

for 2-Pack for Multi-Code 3089 MultiCode 308911 Linear MCS308911 Garage Gate Remote 300m

Based on 83 reviews Check latest price

Product description

300 MHz frequency gate or garage door remote transmitter 10 dip switch programming, one button Compatible with ALL 300 MHz Multicode gate or garage door opener systems Replaces Multicode model 1089 300MHz 10 Dip Switch Remotes Replaces MultiElmac 3089 Same as product number MCS308911 Dimensions: 3.75 x 2.5 x .875 inches Visor clip, 9V battery and one year warranty included

300 MHz frequency gate or garage door remote transmitter 10 dip switch programming, one button
Compatible with ALL 300 MHz Multicode gate or garage door opener systems
Replaces Multicode model 1089 300MHz 10 Dip Switch Remotes
Replaces MultiElmac 3089 Same as product number MCS308911
Dimensions: 3.75 x 2.5 x .875 inches Visor clip, 9V battery and one year warranty included

User questions & answers

Question:	Hola puede abrir el portón
Answer:	Hello Gabriella, I also have an older opener, as long as I could program the numbers inside to the remote it was ok. If you have the same set up you won't have a problem.

2 Pack 3089 Linear Multi-Code Remote Transmitter Gate Garage Opener Brand New

Multicode by Linear

Based on 66 reviews Check latest price

Product description

Multi-Code Garage Gate Door Opener Model 308911 Pack
300 MHZ Frequency gate or garage door remote transmitter
Replaces Multi-code model 1089 300MHz 10 Dip Switch Remotes
Multi-code 3089 replaces Multi Elmac 3089
NOT A UNIVERSAL REMOTE

User questions & answers

Question:	What battery does this take
Answer:	if your unit requires a 10 digit code

Linear 3089 Multicode 3089 Compatible Visor Remote Opener

Multi-Code

Based on 6 reviews Check latest price

Product description

This remote only works with Multi-Code 300 MHz products 10 binary, dip switches Visor clip and 9-Volt battery Compatible with all US Multicode gate or garage door opener systems NOT A UNIVERSAL REMOTE

This remote only works with Multi-Code 300 MHz products
10 binary, dip switches
Visor clip and 9-Volt battery
Compatible with all US Multicode gate or garage door opener systems
NOT A UNIVERSAL REMOTE

User questions & answers

Question:	I have a really old touch and go model 100 the remote frequency on the back of the remote reads 350-18 with a 6digit code. Will this work for that
Answer:	Si
Question:	Does it work with Stanley brand garage opener
Answer:	Amazon always takes care of there customers so just tell them if something happens and they will handle it for you
Question:	Will this work on stanley model
Answer:	Not the correct information MD1410 is the Manufacture Date
Question:	Hello all, my apt building told me i have to purchase a "nine digit remote" to access the lot & i never have before so will this model be compatible
Answer:	The question that would have to answered first would be. Does your current opener have rocker tabs that you set or doe it have a wireless rolling code? You can look on the back of your opener or open the battery compartment on your remote. This remote uses an eight pin rocker tabs

Linear Multicode 3089 Compatible Visor Remote Opener

STINGER

Based on 965 reviews Check latest price

Product description

Stinger 300MCD21V garage door opener visor sized remote is a 10 dip switch, 300 MHz remote that is compatible with Multicode. ONLY Operates with Linear Multi-Code receivers and transmitters on 300mhz with 10 dip switches.(This is not for Genie, Liftmaster, Sears, Raynor, Wayne Dalton, motor head will say Linear) Test/operate LED. Gray case Frequency: 300 MHz. Visor clip and 12 V battery included.

Order Linear Compatible 300MCD21V Visor remote if:
Your opener is a Linear 300MHz Multicode with 10 dip switches on motor head
Compatible with 308911 remote by Linear
To Program: match dip switches in remote to switches in your Linear Opener
Remote includes: Battery, Visor Clip and Instructions

User questions & answers

Question:	Does it replace the stinger ccs3001bv
Answer:	Yes, this pocket door latch comes with the strike plate.
Question:	How many dip switches it have
Answer:	This privacy pocket door latch will work on doors 1-3/8 inch to 1-3/4 inch. The most common door thickness in residential homes is 1-3/8 inches
Question:	What size battery? ..give me the model
Answer:	The latch comes with a jamb insert that the latch locks to.
Question:	The technical details say 5.8 x 3.8 x 0.8 inches, which seems very large (packaging dimensions?). What is the approximate size of the remote
Answer:	I asked the same question, but nobody gave me an answer. What you see in the photo sticking out acts as the pull for the door. You just tap it upward and it pops out for you to grab. The actual lock looks like a dead bolt shaft, but when you twist the lever, a little hook pops out that latches against the lock plate. Seems to work pretty well and looks a lot better than the typical square wrap around pull/lock mechanism.

Firefly 310 Linear DTC and ladybug compatible keychain remote better range & you pay less!

Firefly

Based on 569 reviews Check latest price

Product description

CONTENTS This remote is a very small (1/2" x 1-7/8" x 1-1/2") key-chain style remote operating at 310 MHz. It achieves its small size by using state-of-the-art components. It has been designed for use with; Linear 3 receivers. CODING Access to the remote's toggle code switch is achieved by unscrewing the back cover. Set the EIGHT-digit toggle code switch to match the code set in the receiver. Move switches using a small pointed object, such as a paper clip. Gently switch the small switches to either + or - positions. When complete screw the back cover back into position OPERATION Once the codes are set to match the transmitter codes, you may test the system. Ensure the gate or door is visible and clear before testing. Step 1- Push the Remote's button from a distance of about ten feet. If the receiver activates, the switches are properly set. Step 2- Test the transmitter from several locations to discover any "blind spots" caused by interference. BATTERY ACCESS Unscrew the back cover to reach battery compartment. Be aware of battery polarity when replacing the A23 battery. TECHNICAL SPECIFICATIONS Operating Frequency- 310 MHz Number of Buttons- 1 Battery- 1 ea. 12V A23 Number Combinations- Lots :-) Operating Temperature- -20F - 100F Overall Dimensions- 1/2" x 1-7/8" x 1-1/2" Weight- 1 oz. COMPATIBLE REMOTES Linear Delta 3 DTC or LB ladybug.

Black
One-button (green-old model, white-new model)
Key chain model
8 dip switches
310 MHz

User questions & answers

Question:	What size battery does this use and how long do they last
Answer:	No it will not work for a Stanley made garage door
Question:	I bought this remote 310mhz and i followed up all the instructions, even i reversed the codes (on to off, off to on) and still didn't work. what am i
Answer:	Doesn't work period.
Question:	My remote has 8 dip sw all right. but, each switch has 3 positions - top, center, bottom. plus there are no markings at all for freq, will this work
Answer:	I don’t know about all of them , but mine is Allister.
Question:	How do I get it open? I removed screw & notch will not help open
Answer:	If your reciever is old like mine, it may have 3-position dip switch (+, 0, -). I set mine to all 0's and it works. I tried the all + settings and that did not work. Hope this helps.

Linear MCS412001 Multi-Code 2-Channel Visor Transmitter

Linear

Based on 821 reviews Check latest price

Product description

Portable and designed for automatic door and gate operator applications, the Linear/multi-code 2-channel visor transmitter features raised dimples for easy, or vision-impaired identification. The left and right buttons channel signal one and signal two respectively. It is powered by a 9-volt battery, includes a visor clip and a test/operate indicator. The transmitter is multi-code format with two 10-position coding switches, providing 1,024 possible codes per channel. Independent coding supports activation of a common gate and a private door. The transmitter will only activate receivers set with the same code.

Easy access to battery and coding switches
1,024 possible codes per channel
9-Volt battery
Visor clip included
Compatible with 300 MHz multi-code receivers as well as model 109950 and 302850 receivers

User questions & answers

Question:	Does it work with Genie intellicode garage door controller
Answer:	No, this won't work and I doubt if you will find a remote for that system.
Question:	If i am replacing one remote with 8 dip switch and a 10 dip switch will it work
Answer:	It works perfectly with the Stanley brand receiver on my garage door opener. Just make sure the receiver (or the remote transmitter you want to replace) is 300 mhz with 10 binary (two position) dip switches. I had to take my receiver down to open it, but it opened with just one screw. If you open yours, record the positions of the dip switches so that you won't have to do this again when your new remote arrives.
Question:	What kind of remote i cannuse for my liftmaster garage door and need 10 pin garage door remote control
Answer:	You can google the multi code inside set up to see if it matches your Stanley model if you have a smartphone if it matches it should work if it don’t match it will not work
Question:	How do i know if the frequency is 300mhz
Answer:	The most important information you need to know is what Frequency is your receiver on the Opener Motor? This model Remote is only compatible with a 300MHz Frequency Receiver. If your Opener Motor Receiver does in fact have a 300MHZ frequency then these buttons should work. They have a 10 position dip switch. J.D.

Two (2) Replacement 3060 3089 4120 Compatible MultiCode Remote Garage Door Mini Transmitter 300mhz 3089 4120 1090 (308911, MCS308911 300mhz) Linear

Based on 1 reviews Check latest price

Product description

3089 3060 multi-code multicode 308911 Compatible Linear MCS308911 300mhz 1 button remote 300 MHz frequency gate or garage door mini remote transmitter 10 dip switch programming, one button Compatible with ALL 300 MHz Multicode gate or garage door opener systems Replaces Multicode model 3089 3060 4120 300MHz 10 Dip Switch Remotes Replaces MultiElmac 3089 3060 4120 Same as product number MCS308911 Dimensions: 3.75 x 2.5 x .875 inches Visor clip, 9V battery and one year warranty included Disclaimer: We are Not affiliated with the manufactures or authorized seller for Chamberlain Liftmaster and Craftsman Sears products.

✅300 MHz frequency gate or garage door mini remote transmitter
✅Replaces Multicode Linear model 3089 3060 4120 300MHz 10 Dip Switch Remotes
✅Compatible with ALL 300 MHz Multicode Linear gate or garage door opener systems
✅Visor clip, 12V 23a battery and one year warranty included

User questions & answers

Question:	Will these work with the over head door legacy
Answer:	I have no idea but usually if you look online it will tell you which all devices can be used because you're just programming it for the code that's on your own gate or your own garage so you would just have to look up you know your garage I don't know though
Question:	How many switches is it and whats the distance
Answer:	I am by no means an expert I just looked it up online and I was able to enter the code and it open the gates
Question:	We just bought a house. the previous owner left no garage door openers. how do i program these? the garage door opener is a challenger
Answer:	What is the model of your LiftMaster ? Is there another receiver near it. Reason for the inquiry is that LiftMaster never had a 10 Dip Switch in their operator. The Older one had a 9 dip switch with 3 positions ( +, 0, and - ) If there is an auxiliary receiver on it that is gray and says Multi Code then you will want the 4120
Question:	How can I get these apart without breaking them
Answer:	Look at your old remote. On back label.

Lot of 2 Linear Multi-Code Visor Transmitter, 2-Channel (412001)

Based on 89 reviews Check latest price

Product description

Two channel transmitter,Compatible with ALL Multicode 10 Dip Switch systems, two sets of 10 Dip Switches. 300 MHZ Frequency gate or garage door opener remote. Velcro strip and 12V battery included.

Two Button
Visor Clip
Binary Dip Switch Coding
9-volt Battery
10 Dip Switches

User questions & answers

Question:	the 2 pack of remotes 412001 is the same as the single remote
Answer:	1089 and 3089. Is the same remote because both remotes are 300mhz Also make sure are 300mhz because linear make similar remote for 3089 but in the back the remotes is 3089-10-310mhz Is a remote for Stanley garage door units .
Question:	What about the product
Answer:	You need to review the instructions for device you are attempting to open. You can try programming key to homelink just like you would GARAGE opener. Hope thus helps.
Question:	Do you sell in lots of 5 ? The remote I have now is 412001 1729 300 will yours work
Answer:	Las que yo compre si traían.
Question:	are these transmitting at 3089 OEM
Answer:	You have to program the remote with your neighborhood's gate opener first so that it can work on it. Besides, our remote only works on our gate openers.

2X Garage Door Remote for Stanley 1050 Linear 310Mhz Gate Opener 105015

Based on 40 reviews Check latest price

310 mhz
compatible with all Stanley openers from 1982-1995
10-dip switch programming
Video installation instructions provided
aftermarket part for Stanley Garage Openers

MULTI-CODE3089-3089 Multi-code Multicode 308911 OEM Linear MCS308911 300mhz 1 button remote by LINEAR RESEARCH (Original Version)

LINEAR RESEARCH

Based on 819 reviews Check latest price

3089 - 300 MHz remote

User questions & answers

Question:	Is this compatible with linear 300hz transmitter
Answer:	ansory but i don't have this gate opener
Question:	I’m starting to feel I bought the wrong kind of remote. I don’t have a code to my garage, is that required for this type of remote
Answer:	There is 10 dip switches, same as the Multicode Linear brand remotes. This remote is not a universal remote it is compatible with Multicode and Linear brands with 300Mhz frequency
Question:	Does this work for a Challenger CH
Answer:	Here is the manual to your Challenger 9300: https://cdn.shopify.com/s/files/1/1499/9402/files/Challenger_9300_Manual.pdf?7943277628059801567 Refer to p.14 to reset the DIP Switches in the Receiver (so that the previous owner can't get into the garage) to any number you like, and then open the Transmitters and program them to match. I'm seeing that the Challenger 9300 is a 9-Switch / 3-Position bank but the remotes are 10-Switch/2-Position so you should confirm that they will work together. Best of luck ...
Question:	Does this work with mod 3389 residential gate opener canada 164 x 731 multi code
Answer:	Very simple, use a small Phillip screwdriver to unscrew the small screw that holds the metal visor clip in the back of your remote, once you remove the screw then the 2 ends of plastic cover will come apart.