11 best siig wifi extenders

Product description

NETGEAR AC750 WiFi Range Extender (EX3700-100NAS). System Requirements:2.4 and/or 5GHz, 802.11 a/b/g/n/ac wireless router or gateway, Microsoft. Internet Explorer. 8.0, Firefox. 20, Safari. 5.1, Google Chrome 25.0 browsers or higher. Troubleshooting tip- If you cannot get a WiFi connection working, you can use an Ethernet cable to connect your computer to the extender. Data throughput, signal range, and wireless coverage per sq. ft. may vary due to differences in operating environments of wireless networks, including without limitation building materials and wireless interference. Operating temperature: 32°to 104°F.

• Extended wireless coverage: Adds WiFi range coverage up to 1000 square feet, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more
• AC750 WIFI speed: Provides up to 750Mbps performance using dual band and patented FastLane technology
• Universal compatibility: works with any wireless router, gateway, or cable modem with wifi. The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non standard or outdated
• Wired Ethernet port: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed
• Safe & secure: Supports WEP and WPA/WPA2 wireless security protocols
• Simple to setup: Press the WPS button to connect to your router. Use the NETGEAR WiFi Analyzer app for optimal location

User questions & answers

Question:	My family has two appartments next to each other, both separate electrical installations. Would this work if we wanted to split the internet bill
Answer:	Yes the EX8000 used as a wifi extender you have the option of having a guest network. You can use same SSID name as your main router or use a different SSID altogether. I did have issues with more than one extender on the same network using same SSID name as main router so I had to change one of the extenders to a different SSID.
Question:	Has anyone connected a ps4 of xbox one to the wifi from the range extender? if so, signal and game play any good
Answer:	If you mean an AT&T router signal, yes. If you mean cell tower signal, then no.
Question:	Does it create a new sid or does it exteneded your current sid, so one does not have to switch to differing networks when in range
Answer:	the input voltage is from 100 to 240 volts
Question:	I don't understand how some people give this 4-5 stars and others can't get it to work and give it 1 star
Answer:	there are 4 ports. I use multiple ones as this is the only system I can find that does not change the network name but once a year I also have one break and have to replace it or hard reset it myself.

Product features

Discrete Wall Plug Design

Plug into a wall outlet for a sleek solution that extends your router's range and stays out of sight.

Smart Connect up to 15 Devices

Intelligently selects between dual bands to minimize interference and maximize speed for your smart wireless devices.

5-Minute Setup

Connect to your existing router with one button press, connect devices to your network, and you’re done.

Connect a Wired Device, Too

One 10/100M Ethernet port lets you easily connect a nearby wired device for faster transfer and uninterrupted connection.

Universally Compatible

Works with any WiFi router for hassle-free reliability.

Product description

Specifications: -Compliant with HDMI 1.3 and HDCP 1.4 -Maximum transfer rate: 10.2Gbps -Support KVM Function, remote control conveniently -Point to Point connection: up to 60m (Note: Does not support connecting to Router or Switch) -Supports 2-Ch PCM stereo audio Distance: -Cat5e: up to 50m -Cat6: up to 60m Resolution: -HDTV: 480p / 720p / 1080i / 1080p 60Hz -PC VESA: 640x480, 800x600, 1024x768, 1280x720, 1280x800, 1280x1024, 1440x900, 1680x1050, 1920x1080 -Housing material: Metal Power adapter: -Input: 100-240V / 50-60Hz -Output: DC 5V/2A -UL listed: E335801 / Level: VI Warranty: This Full HD HDMI KVM over Cat 6 Extender is supported with a 2 YEARS warranty. Package Contents: -Full HD HDMI KVM over Cat 6 Extender - 60M -Power Adapter -USB A to A cable -User Reference Guide

• HDMI KVM EXTENSION: Extends Full HD 1080p HDMI signal over single Cat5e/6 cable up to 196ft with 2-ch PCM stereo audio. Extend and control your devices with a key board and mouse with nearly zero latency. NOTE: Connecting to a Router or Switch is not supported.
• HIGH SPEED transfer rate at 10.2Gbps. Perfect High Definition AV transmission solution for conference rooms, video shoots, multimedia education system, and digital signage advertising.
• PoC FEATURE: Only one power adapter is required to power both transmitter and receiver units. Plug the power adapter to Transmitter and power Receiver with a CAT5e/6 cable up to 60M.
• SIMPLE INSTALLATION: Plug-n-play; No software installation or hardware setup is required. Built with high quality metal housing to ensure system stability during long hours of operation.
• LIFETIME TECHNICAL SUPPORT: This HDMI USB KVM extender is supported with a 2 years warranty. Please contact us first if you have any questions regarding the product or setup.

Product features

Specifications & Distance

• Compliant with HDMI 1.3 and HDCP 1.4
• Maximum transfer rate: 10.2Gbps
• Support KVM Function, remote control conveniently
• Point to Point connection: up to 60m (Note: Does not support connecting to Router or Switch)
• Supports 2-Ch PCM stereo audio

Cat5e: up to 50m

Cat6: up to 60m

Resolution

• HDTV: 480p / 720p / 1080i / 1080p 60Hz
• PC VESA: 640x480, 800x600, 1024x768, 1280x720, 1280x800, 1280x1024, 1440x900, 1680x1050, 1920x1080
• Housing material: Metal

Power Over Cable (PoC)

Only one power adapter is required to power both transmitter and receiver units. Plug the power adapter to Transmitter and power Receiver with a CAT5e/6 cable up to 60M.

Product description

SIIG's Pro Wireless IR Remote Control Signal Extender/Repeater allows for you to control your IR-enabled AV equipment remotely from an extended distance of up to 200m, depending on surrounding obstructions.



Applications



- Extend the distance of your IR remote controlled systems

- Allows you to move around without and control your source/display without needing to be close

- Change the channel or volume from across large rooms or open spaces



Specifications:

-Wireless transmission distance: up to 656ft (200m), line-of-sight

-Wireless frequency: 915MHz

-Power gain: 10dBm

-IR frequency: 20KHz - 60KHz

- Housing: Aluminum

NOTE: Remote controller should be used within 15 feet of transmitter to send signal to the receiver



USB power cable:

-Input: 4-Pin, USB Type-A, Power input

-Output: DC 5V output

-Power consumption: 300mW



Transmitter unit (TX) Connector:

-1x, 3.5mm, IR Jack, Receiver

-1x, DC Jack, USB power input

-1x, IR Receiver sensor

-1x, IR LED indicator

-1x, Click button, lock ID



Receiver unit (RX) Connector:

-1x 3.5mm, IR Jack, Emitter

-1x, DC Jack, USB power input

-1x, IR Emitter sensor

-1x, IR LED indicator

-1x, Click button, lock ID



Warranty: Supported with a 2 years limited warranty, and a lifetime technical support



Package Content:

-Wireless IR Signal Extender Kit

-USB power cable (2pcs)

-IR blaster extension cable

-IR blaster extension cable

-User reference guide

• COMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters(656 feet) away(line-of-sight), depending on surrounding obstructions.
• WIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.
• HIGH PERFORMANCE IR electronics provide real time signal transmission without delay ; Features Click Lock ID button pairing the transmitter and receiver, preventing interference from other devices.
• EASY INSTALLATION: Portable size design with bundled infrared extension cables allow easy and flexible placement anywhere in a home or office environment. Please keep in mind to place the extension cables in line-of-sight of the source IR sensor no further than 2 inches for best signal.
• PREMIUM QUALITY: Aluminum housing enhances heat dissipation and durability for durable and dependable performance. Supported with a 2 year warranty and life time technical support located in California.

User questions & answers

Question:	do you have to put the receiver directly in front of the device you are contolling? I have an electric fireplace and cannot put this in front of it
Answer:	If you have a receiver that controls your item (stereo, TV, etc) then the answer is yes, however you can locate that receiver any place to satisfy the IR problem. Then locate another SIG next to, or within the proximity to enable the remote to control the TV etc. The two signs can be up to 600' apart.
Question:	Will this work for a LG outdoor Projector
Answer:	Yes. It will work on anything that has an IR receiver.
Question:	What are the actual dimensions of these units? are these "product dimensions 3.07 x 0.16 x 0.12 inches" correct
Answer:	No, the dimensions of each unit is about 2" wide by 1.5" deep by 1" high and the antennae adds another 2" to the height. Each of the cords plugging in to the front and back of the unit add another inch to the depth, so the total depth with connections in the front and back would be about 3.5"
Question:	Can i use more than one transmitter to send to a single receiver
Answer:	I'm not sure about your question. The transmitter sits in front of the device you want to control. You would have one transmitter but you can have as many receiver units as you want. Example, I have the transmitter in front of the cable box in the living room and I have a receiver unit in a bedroom but with additional receiver units I could send it to as many sets as I would want. I hope this helps.

Product description

SIIG's Wireless 1080P HDMI Extender Video Kit is designed to transmit HDMI audio/video signals wirelessly up to 165 feet from an HDMI source to a remote display in line-of-sight environments. No need for convoluted wires or cables. Full HD 1080p resolution is supported to deliver crystal-clear images/videos with minimal latency. It also features built-in IR signal extension to enable remote controlling of your source device. This wireless HDMI video receiver and transmitter kit is easy to set up, with no software installation required. It is an excellent HDMI extender solution for home entertainment, showrooms, and many more digital signage applications to wirelessly broadcast HDMI signals from any blu-ray player, set-top box, AV receiver, cable/satellite box, or computer system to a remote display. Watch your favorite shows or give flawless presentations without the extra cost and time on cable or wire installation. Connect the IR Receiver extension cable to the receiver's IR In for cases where you need to control your HDMI source from a remote location. May experience sub-optimal signal transmission through thick building surfaces and non-line-of-sight applications. Package Contents: -Wireless 1080P HDMI Extender Video Kit - Mid-Range (TX and RX units) -IR blaster extension cable -IR receiver extension cable -Power adapters (x2) -Power extension cables (x2) -RP-SMA Wi-Fi antenna extension cable with stand - 3M -User Reference Guide

• INCREASE YOUR VIEWING RANGE: Transmitter and Receiver wirelessly sends HDMI A/V signals up to 165 feet through line-of-sight environments; works with most HDMI-equipped devices, including blu-ray players, set-top boxes, AV receivers, cable/satellite boxes, and computer systems.
• UNCOMPROMISED VIDEO QUALITY: Supports vivid, high-definition videos up 1080p @60Hz. Compatible with HDMI 1.3 and HDCP 1.2 (High-bandwidth Digital Content Protection); best used for TV/video applications rather than computers or real-time applications; Note: A delay of less than 0.5 seconds might occur due to data compression- Not recommended using for PC gaming.
• EASY TO USE: PLUG&PLAY. No complicated cable or wire installation needed so setup is quck and easy and the wall-mountable metal housing provides multiple placement options for the best signal broadcast or reception angles. NOTE: Do NOT install multiple kits in the same location as this may cause signal interference.
• BUILT-IN IR REMOTE CONTROL: Built-in IR signal extension feature allows you to control the playback device remotely. Imagine you have a DVD player in your media room and a TV in your living room, while you are in the living room, you can still use your DVD remote to control the DVD player with IR CONTROL EXTENSION function.
• UPDATED HARDWARE: Now includes a Wi-Fi extension wired antenna with magnetic base offering more flexible placement for better signal reception in suboptimal installation conditions. Our products are backed with a ONE YEAR limited warranty and experienced tech support team in Silicon Valley. If you have any questions or concerns regarding this product, please do not hesitate to contact us.

User questions & answers

Question:	does anyone have a picture of the back side of this unit? Can it be powered by USB power
Answer:	This product can't be powered by USB. Need to use the included power adapter on both sides.
Question:	will it work with ps
Answer:	Yes, it will work. However, it is not recommended if used for playing games (video playback is okay). Also, please keep in mind that this product only supports up to 1080p.
Question:	Can you buy a second receiver separately? Thx
Answer:	We do not sell the receiver separetly, we only sell the product as a whole unit.
Question:	does it supportultra HD 4k a/v
Answer:	This product only supports up to 1080p.

Product features

Wirelessly Transmit HDMI Signal 165ft

Transmitter and Receiver wirelessly sends HDMI A/V signals up to 165 feet through line-of-sight environments; works with most HDMI-equipped devices, including blu-ray players, set-top boxes, AV receivers, cable/satellite boxes, and computer systems.

Built-In IR Remote Control

Built-in IR signal extension feature allows you to control the playback device remotely. Imagine you have a DVD player in your media room and a TV in your living room, while you are in the living room, you can still use your DVD remote to control the DVD player with IR CONTROL EXTENSION function.

Applications

It is an excellent HDMI extender solution for home entertainment, showrooms, and many more digital signage applications to wirelessly broadcast HDMI signals from any blu-ray player, set-top box, AV receiver, cable/satellite box, or computer system to a remote display. Watch your favorite shows or give flawless presentations without the extra cost and time on cable or wire installation.

Updated Hardware

Now includes a Wi-Fi extension wired antenna with magnetic base offering more flexible placement for better signal reception in suboptimal installation conditions.

NOTE: May experience sub-optimal signal transmission through thick building surfaces and non-line-of-sight applications.

Specifications

• Compliant with HDMI 1.3 & HDCP 1.2
• Wireless Technology: 5GHz
• Video Compression Technology: H.264
• Wireless latency: <200ms
• Resolution: 480p / 720p / 1080i / 1080p @60Hz (Note: Samsung UltraHD Blu-ray model UBD-M7500 must be downscaled to 720p output to display properly on ASUS VE248 monitor.)
• Distance: Up to 165ft (line of sight) (Note: The transmission distance will vary depending on building layout, electronic interference, walls and partitions, other environmental conditions, and may be much less than the maximum)
• HDMI cable length: Up to 5m (Input & Output)
• Supports 2-Ch R/L stereo audio
• Supports full frequency IR signal from 20KHz to 60KHz
• Housing material: Aluminum

Requirements

• 1080p HDMI source device
• HDMI displays, monitors, and HDTVs
• HDMI cables (x2)

Package Contents

• Wireless 1080P HDMI Extender Video Kit
• Mid-Range (TX and RX units) -IR blaster extension cable
• IR receiver extension cable -Power adapters (x2) -Power extension cables (x2)
• RP-SMA Wi-Fi antenna extension cable with stand 3M
• User Reference Guide

• HDMI OVER COAX EXTENDER: Extends the transmission range up to 120m (394ft) from the HDMI sources under Full HD resolution (1080p60 24-bit color depth) through RG6/RG7 coaxial cable.
• SUPPORTS HIGH QUALITY AUDIO & VIDEO: Supports 7.1-channel audio & digital stereo audio. Supports video resolutions support 480i, 576i, 720p, 1080i and 1080p (NOT 480p)
• ESD PROTECTION: Electrical surge protection allows for greater reliability. Human body model: +/- 15kV (air-gap discharge) & +/- 8kV (contact discharge)
• BI-DIRECTIONAL IR: IR sensors allow you to remotely control the HDMI source device from the remote display side or control the remote display from the source device side
• HIGH QUALITY and COMPACT DESIGN: Sturdy metal housing provides durability and reduces EMI/RFI noise interference. It's wall mounting housing design makes it easy to install. Contact us if you have any questions with this product's functionality or compatibility. Made in Taiwan

User questions & answers

Question:	Can i adapt to f type connection
Answer:	You need a BNC end not an adapter
Question:	Is there a similar product that supports 4K
Answer:	I haven’t found anything that supports 4K over coax
Question:	Will this work the other way? i have hdmi going from my entertainment area to my tv. i want to use that hdmi to carry a coax signal
Answer:	Definitely not. These are made to extend hdmi signal across a coax cable its not a converter. Someone else might make one but ive never seen one personally.
Question:	Can the transmitter send hdmi to multiple tv's using additional receivers
Answer:	I tried with a second receiver and couldn’t get it to work

Product features

HDMI OVER COAX EXTENDER

Extends the transmission range up to 120m (394ft) or up to 70m (230ft) (depends on quality and characteristics of coax cable used) from the HDMI sources under Full HD resolution (1080p60 24-bit color depth) through twist on RG59/RG6/RG7 and above coaxial cable (if able to push right in, then the wrong cable is being used). Coaxial cables can carry greater bandwidth and cover longer distances than other solutions.

• RG59 - 70m (230ft)
• RG6 - 120m (394ft)
• Solid and shielded coax cable such as Belden 1694A with metal 75ΩBNC connectors is recommended

LONG DISTANCE HIGH QUALITY AUDIO & VIDEO

Supports long distance transmission for resolution support up to 480i, 576i, 720p, 1080i and 1080p (NOT 480p). Supports 7.1-channel audio & digital stereo audio.

HIGH QUALITY COMPACT DESIGN

Sturdy metal housing provides durability and reduces EMI/RFI noise interference. It's wall mounting housing design makes it easy to install. Electrical surge protection allows for greater reliability. Human body model: +/- 15kV (air-gap discharge) & +/- 8kV (contact discharge)

Specifications:

• Compliant with HDMI Deep Color and HDCP
• Supports resolution 480i / 720p / 1080i / 1080p60 (Does NOT support 480p)
• Supports full frequency IR signal from 20KHz to 60KHz
• Supports EDID management
• Video bandwidth up to 6.75Gbps (225MHz per channel)
• Bi-directional IR path-through
• ESD protection: Human body ±19kV Air ; ±12kV contact
• TAA compliant
• BNC connector 75O interlocking socket
• PCB stack-up: 6-layer board [impedance control — differential 100O; single 50O]

Transmission Distance:

• 1080p @60Hz: up to 120m (394ft coaxial RG6 cable) / 70m (230ft coaxial RG59 cable)
• Transmission range depends on the quality and characteristics of the coaxial cables. Higher resolutions and longer transmission distances require low cable skews.
• Solid and shielded coax cable such as Belden 1694A with metal 75ΩBNC connectors is recommended

Package Contents:

• HDMI over Coaxial Extender with IR
• Power adapter x 2
• IR Blaster extension cable & IR Receiver extension cable
• Screw kit
• User reference guide

Product description

Specifications:

-Transport protocol: HDbitT

-Compliant with HDMI 1.3 and HDCP 1.2

-Supports 2-Ch PCM stereo audio

-Supports full frequency IR signal from 20KHz to 60KHz

-Resolution: 480p / 720p / 1080i / 1080p@60Hz

-Aluminum housing with wall mount design



Supported connections:

-Point to Point connection: up to 120m

-Router connection (dedicated network router / repeater), realize unlimited extension

-One to more connection (dedicated Gigabit switch)



Power adapter:

-Input: 100-240V / 50-60Hz

-Output: DC 5V/1A

-UL listed: E335801; VI



Warranty: This HDMI over IP Cat6 Extender has a 2 YEARS warranty. Contact us if you have any questions with product setup or compatibility.



Requirements:

-HDMI source device, such as computers, game consoles, Blu-ray/DVD players, and media players

-HDMI displays, monitors, and HD TVs

-HDMI cables

-Router, Gigabit switch, or Repeater (network expansion)



Package Contents:

-HDMI HDbitT over Cat6 Extender with IR - 120m(One Transmitter unit + one Receiver unit)

-Power adapter (2pcs)

-IR Blaster extension cable & IR Receiver extension cable

-User Reference Guide

• HDMI EXTENDER KIT OVER IP: Full HD 1080p @60Hz HDMI audio and video signal up to 394ft (120m) over economical CAT6 cable while maintaining signal strength and quality. Connect your HDMI source device (PC, Xbox One X/PS4 Pro, Blu-ray player, media player) to the Transmitter, utilize existing Ethernet structure in your house/office to connect the transmitter to Receiver, then connect your HDTV from a remote location to the Receiver with your own HDMI cable
• FULL HD RESOLUTION: Delivers crystal clear video content at 480p / 720p / 1080i / 1080p@60Hz. Supports 2-Ch PCM stereo audio.
• OVER IP NETWORK DISTRIBUTION: Direct Point-to-Point connection or 1-to-Multiple Connection through dedicated Gigabit network routers or switch. You can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays to create a scalable HDMI extender splitter. Additional receivers (part# CE-H24U11-S1) sold separately
• IR REMOTE CONTROL: Allows you to remotely control the HDMI source device at a secondary location with the included IR cables for convience. Supports full frequency IR signal from 20KHz to 60KHz.
• PLUG-N-PLAY: No software installation is required. With a built-in power LED indicator help provide easy power status monitoring. This HDMI extender over Cat6 is supported with a 2 year warranty.

User questions & answers

Question:	Can I hook this to 2 tvs in the same room to play the same picture
Answer:	you can if you use a switch. you would need to run the transmitter into a switch, then two cat 5 cables out of the switch to two receivers, or use an HDMI splitter at the receiver and two HDMI cables to the separate TVs. If your source is in the same room as the TVs, then you need an HDMI splitter.

Product features

Scalable HDMI Signal Amplifier Distribution System

Direct Point-to-Point connection or 1-to-Multiple Connection through dedicated Gigabit network routers or switch.

You can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays to create a scalable HDMI extender splitter.

Additional receivers (CE-H24U11-S1 / B07MSJGB9Q) sold separately

Full HD Resolution & 2-Ch Audio

Delivers crystal clear video content at 1080p@60Hz / 480p / 720p / 1080i / and supports 2-Ch PCM stereo audio.

Please Read

• CAT6 is recommended over CAT5e (A good quality CAT5e/6 cable is essential in delivering quality content.)
• Network setup with multiple Receivers requires unmanaged Gigabit Ethernet switches for best performance. Dedicated unmanaged Gigabit Ethernet switches are recommended
• This product comes with one Transmitter and one Receiver. For one Transmitter to multiple Receivers setup over the network, 1080p Receiver(s) can be purchased separately (part# CE-H24U11-S1 / ASIN B07MSJGB9Q)

Specifications

• Transport protocol: HDbitT
• Compliant with HDMI 1.3 and HDCP 1.2
• Supports 2-Ch PCM stereo audio
• Supports full frequency IR signal from 20KHz to 60KHz
• Resolution: 480p / 720p / 1080i / 1080p@60Hz
• Aluminum housing with wall mount design

Recommended Devices

• HDMI source device, such as computers, game consoles, Blu-ray/DVD players, and media players
• HDMI displays, monitors, and HD TVs
• HDMI cables (5m MAX)
• Router, Gigabit switch, or Repeater (network expansion)

Package Contents

• HDMI HDbitT over Cat6 Extender with IR - 120m(One Transmitter unit + one Receiver unit)
• Power adapter (2pcs): Input: 100-240V / 50-60Hz, Output: DC 5V/1A, UL listed: E335801; VI
• IR Blaster extension cable & IR Receiver extension cable
• User Reference Guide

Product description

• Compliant with USB 2.0 specification
• Supports USB 2.0 data transfer rate up to 480Mbps
• DIP switch adjusts the cable skew for different length Cat6 cable
• Integrated equalizer compensates for different cable types
• Power LED indicators
• ESD protection: 
  
  
  • Air: ±19kV
  • Contact: ±12kV
• Transmitting unit (TX):
  • Dimensions: 2.13" (L) x 0.98" (H) x 2.76" (W)
  • Weight: 0.19 lbs
  • Color: Black
  • Housing: Metal
  • Connector:
    • 1x 4-pin, USB Type-B, Female, Input
    • 1x 8P8C with 2 LED indicators, RJ45, Female, Output
    • 1x 2-pin DIP switch for cable equalization
• Receiving unit (RX):
  • Dimensions: 2.13" (L) x 0.98" (H) x 2.76" (W)
  • Weight: 0.22 lbs
  • Color: Black
  • Housing: Metal
  • Connector:
    • 1x 8P8C with 2 LED indicators, RJ45, Female, Input
    • 4x 4-pin, USB Type-A, Female, Output
    • 1x 2-pin DIP Switch for cable equalization
    • 1x Power jack, power input
• Power Adapter:
  
  
  • Input: 100-240VAC, 50/60Hz
  • Output: DC 5V/2A
  • UL listed: E135856 / Level: VI
• Environmental conditions:
• Operating temperature: 32 to 104 degrees F
• Storage temperature: -4 to 140 degrees F
• Relative humidity: 20 to 90% RH (non-condensing)
• TAA compliant
• Certifications/Standards: FCC, CE, RoHS
• Warranty: 3 years limited
• Country of origin: Taiwan

• LONG RANGE EXTENDER USB 2.0 - Transmission distance up to 264 feet (80 meters) to connect to far away USB devices
• CONNECT UP TO FOUR USB - peripheral devices, such as USB printers, USB camera, USB storage devices, USB card-readers. Great for Surveillance, Webcam, Video Conferencing, Gaming & More!
• DATA TRANSFER SPEEDS - USB 1.0 (low-speed), USB 1.1(full-speed), and USB 2.0 (480Mbps high-speed) data transfer rates
• SUPPORTS - USB hot-swap, Plug-and-Play, and suspend/resume features
• LIFETIME TECHNICAL SUPPORT No driver installation needed for the extender, the USB driver is installed automatically by the operating system. Metal housing for better RF shielding, efficient cooling, dependable performance

Product description

Specifications:

-Chipset: PS8409

-Compliant with HDMI 2.0 specification

-Supports HDCP 2.2 and 3D video

-Bandwidth: Up to 18Gbps

-Resolution: Up to 4K@60Hz, 4K HDR



Transmission distance:

-4K@60Hz / HDR: Up to 20 meters (10m input / 10m output)

-4K@30Hz: Up to 30 meters (15m input / 15m output)

-1080p@60Hz: Up to 30 meters (15m input / 15m output)



Certifications/Standards: FCC, CE, RoHS, TAA compliant



Warranty: 3 years limited



Country of origin: Taiwan

• LONG TRANSMISSION DISTANCE: Extends 4K@60Hz HDMI signal transmission to up to 20 meters using HDMI cables. Bridges HDMI cables together to extend data transmission beyond HDMI cable limitations
• HDMI 2.0 STANDARD: Supports resolution up to 4K@60Hz, including HDR, to your projector, monitor, or TV. Compatible with HDMI 2.0 and HDCP 2.2, and backwards compatible with earlier versions
• ADVANCED FEATURES: Supports Audio Return Channel (ARC), High Dynamic Range (HDR) and CEC Pass-Through
• COMPACT & SLIM DESIGN: Built-in Micro USB power connector provides external power option as needed. Aluminum alloy housing design, small size, light weight, durable, and easy to install and carry

Product description

SIIG 4K HDbitT HDMI Extender Over IP Ethernet transmits and receives HDMI 2.0 signals through a single economical CAT6 cable from a transmiter unit up to 120 meters away over unmanaged gigabit switch. Allows for 1-to-1 and 1-to-many connections to obtain both hdmi extender and hdmi extender splitter functions. This kit is expandable up to 30 additional receivers and introduces a creative solution for a scalable 4K 60Hz HDMI Extender Splitter. Additional receivers (part# CE-H24A11-S1, ASIN# B07JM1FF3W) sold separately.

Specifications:



- Transport protocol: HDbitT

- Compliant with HDMI 2.0 and HDCP 2.2 specifications

Supported connections:

- 1-to-1 connection

- 1-to-many connection

- Router connection (dedicated network router / switch), realize unlimited extension

- Additional receivers (part# CE-H24A11-S1) sold separately

- Supports audio: L/R stereo audio

- Supports IR passback with 20KHz to 60KHz frequency

- Supports HDMI input resolution: 480i / 480p / 576p / 720p / 1080i / 1080p@50/60Hz / 4Kx2K @24/25/30/60Hz

- Supports HDMI output resolution: 1080p @60, 4Kx2K @30/60Hz

Transmission distance:

- Cat5: up to 80m

- Cat5e: up to 100m

- Cat6: up to 120m

- HDMI cable length: 5 meters (Input) / 5 meters (Output)

- Housing material: Aluminum

- Certifications/Standards: FCC, CE, RoHS

Warranty: 2 years limited

Country of origin: China



Requirements:



- HDMI source device, such as computers, game consoles, Blu-ray/DVD players, and media players

- HDMI displays, monitors, and HD TVs

- HDMI cables

- CAT 6 cable



Package Contents



- HDMI 2.0 4K 60Hz HDbitT Over Cat6 Extender with IR - 120m

- 1 Transmitter (TX) and 1 Receiver (RX)

- Power adapters (2pcs)

- IR Blaster extension cable IR Receiver extension cable User Reference Guide

• HDMI 2.0 EXTENDER OVER IP: Extends 4K @60Hz and 1080p @60Hz HDMI audio and video signal up to 394ft (120m) over economical CAT6 cable while maintaining signal strength and quality. Connect your HDMI source device (PC, Xbox One X/PS4 Pro, Blu-ray player, media player) to the Transmitter, utilize existing Ethernet structure in your house/office to connect the transmitter to Receiver, then connect your HDTV from a remote location to the Receiver with your own HDMI cable
• OVER IP NETWORK DISTRIBUTION: Direct Point-to-Point connection or 1-to-Multiple Connection through dedicated Gigabit network routers or switch. You can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays to create a scalable HDMI extender splitter. Additional receivers (part# CE-H24A11-S1) sold separately
• HDMI 2.0 4K 60Hz RESOLUTION: Delivers crystal clear video content at 4Kx2K @30/60Hz / 1080p@60Hz. Compliant with HDMI 2.0 and HDCP 2.2 and supports 2-Ch PCM stereo audio
• IR REMOTE CONTROL: Allows you to remotely control the HDMI source device at a secondary location with the included IR cables for convience. Supports full frequency IR signal from 20KHz to 60KHz.
• PLUG-N-PLAY & DURABLE: No software installation is required. High quality metal housing with ventilation panels provide efficient heat dissipation for system stability and reliable performance during long hours of operation. With a built-in power LED indicator help provide easy power status monitoring. This HDMI extender over Cat6 is supported with a 2 year warranty.

Product description

SIIG's mini-dp video dock with USB 3.0 LAN hub - White allows you to convert your Mini DisplayPort video source to either HDMI or DisplayPort output. It ensures your Mini display port-equipped computer such as MacBook or surface Pro Series computers to be compatible with HDMI or DisplayPort display. Two USB 3.0 ports with SuperSpeed data transfer rate of up to 5Gbps are provided to support smooth and efficient connections. One Gigabit Ethernet port is also available to enable fast and reliable wired network connection. Compact and lightweight design with no external power adapter required makes it Super portable to carry. This mini-dp video dock with USB 3.0 LAN hub is a versatile tool to expand and enhance your computer's connectivity performance for use at home, in the office or on the road.

• CUTTING EDGE SOLUTION - Allows you to add 2 USB 3.0 ports and 1 Gigabit Ethernet port, as well as converting your system's Mini DisplayPort Output to either HDMI or DisplayPort output ; Drivers need to installed for the USB part to function properly.
• OUTSTANDING PERFORMANCE - Supports USB 3.0 data transfer rates up to 5Gbps, Gigabit Ethernet up to 1000 Mb/s transfer rates, DisplayPort output up to 4Kx2K@30Hz, and HDMI output up to 1920x1080@60Hz, enabling reliable and high quality connection.
• MULTI DISPLAY MODES - Supports triple display modes (Mirror, Extended, Primary) through either HDMI OR DisplayPort output. *NOTE: Only ONE video output can be used, either HDMI or DisplayPort. Does not support both outputs simultaneously.
• BROAD COMPATIBILITY - Supports only DP 1.1, does not work with DP 1.2 monitors such as Surface Pro 4 ; Compatible with devices with an available Mini DisplayPort and USB 3.0 port (Need both USB and min displayport to be able to use this product).
• WARRANTY - We provide 3 years warranty with high quality customer service. Please contact us with any questions or concerns.

User questions & answers

Question:	Will this work on late 2013 15” MacBook Pro
Answer:	It works on my 2013 MacBook Air so I imagine it would work on a MacBook Pro also, but as I’m sure you know sometimes there are differences between the 2.
Question:	Will this allow me to get usb 3.0 ports on my 2011 macbook pro 8,1 that only came with usb 2.0, and at the same time use an external monitor(through
Answer:	No you will not achieve USB 3.0 throughput as you're limited by the port speed of your Mac. The USB prot functionality shouldn't have any effect on the external monitor port,
Question:	I have a mac book pro 2010 and want to connect one hdmi monitor and one display port monitor. will this work with one lightning port and one usb
Answer:	No, I don't think it will work. I have a MacBook Pro 2011 and it doesn't support more than one external monitor, so I'm assuming your 2010 model doesn't either.
Question:	I have a 2011 iMac 21 inch, it only has one thunderbolt 2 port, will I be able run 2 external monitors with this in extend mode
Answer:	Sorry，l want to use this Thunderbolt 2 converter adding USB3 ports for this old iMac. I do not require external monitor.

Product description

SIIG's Ultra Compact Wireless IR Remote Control Extender Kit is designed to extend Infrared signal distance wirelessly for IR-equipped devices for maximum flexibility of device placement. It allows you to station your source device from the display unit up to 656ft (200m) away while providing long distance remote control capability. Extended compatibility enables this extender kit to work with most infrared operated electronics such as DVD players, cable boxes, satellite receivers and audio/Hi-Fi stereo systems. Real time signal transmission without delay technology ensures smooth and continuous data transmitting. It is a reliable wireless IR extension solution to extend standard IR signal limitation to long-range signal distance.





Tech Details:

Modulation- FSK

RF range- 200 meters (656ft)

RF frequency: 915Mhz

IR frequency- 20KHz ~ 60KHz

IR sensitivity- -90dBm

IR range- Up to 5 meters

Power adapter: Input- 100-240VAC, 50/60Hz ; Output- 5V DC, 0.5A



Package Content:

-Ultra Compact Wireless IR Remote Control Extender Kit (TX and RX units)

-Power adapter

-Dual IR Emiiter Extension Cable

-IR Receiver Extension Cable

-User Reference Guide



1 year warranty

NOTE!: only works with IR remote control

• COMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters away (656 feet), depending on surrounding obstructions. 2 power adapters included.
• WIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.
• INSTANT TRANSMISSION: Highly sensitive modules provide real-time signal transmission without delay; built-in LED indicator illuminates when the signal is received for easy status recognition
• HASSLE-FREE INSTALLATION: Ultra-compact design with bundled infrared extension cables allow easy and flexible placement. Please keep in mind to place the extension cables in line-of-sight of the source IR sensor no further than 2 inches for best signal.
• NOTE: We recommend using the kit without the IR extension cables. Simply placing the Receiver Unit in line-of-sight with source device can support longer range. Only use the extension cable if needed. Contact us with any questions.

User questions & answers

Question:	Will this work with at&t u-verse tv cable box
Answer:	Yes, it will work with your at&t u-verse tv cable box.
Question:	Does internal emitter emit when the extension cable is plugged in? That is, can I use both the extension cable and internal emitter simultaneously
Answer:	Yes.
Question:	Works great without the wires hooked to it. Why does it freeze when I hook in the wire to the receiver
Answer:	I would call the manufacturer. Mine works gtreat. It’s a good product and I would also let Amazon know and see if they’ll take the product back and replace it if that becomes necessary
Question:	What is the range of the emitter? Does the emitting puck need to be mounted to the IR of the device being controlled
Answer:	Based on similar devices, the range should be at least 30 to 40 feet, I would think. The emitter will usually work if it is set on top of the device to be controlled, or better yet on the shelf right in front of the unit to be controlled. If the device to be controlled is behind closed doors of some kind, it'll usually work when sitting on top of the unit, as enough IR blasts out of the emitter unit, and then bounces off the inside of the doors, thereby controlling the device. These work really well for me.