4 best remote ir extenders

• STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for
• COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!
• SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the IR receiver on the device you wish to control. Lastly, place the IR receiver end in the line of sight of your remote control (no further than 28' from remote control) and that's it! You're all set!
• RESISTANT to interference from stray infrared sources such as plasma TV's & CFL lightbulbs! Worried that your plasma TV or CFL bulbs will cause interference with this IR repeater just like your old IR repeater you bought years ago? Worry no more! With our new plasma resistant technology nearly all of these trouble causing stray IR signals are filtered out! No more randomly changing channels or flashing lights caused by your TV or lightbulbs!
• EXCELLENT MANUFACTURER WARRANTY from BAFX Products. Even though this is extremely inexpensive, BAFX Products stands behind everything we sell or we won't sell it. Your all-in-one IR extender is covered by our 1 year warranty against manufacturing defects and is super easy & simple to claim should the need arise! We also extend Amazon's normal 30 day return period with our 60 day, no hassle, no questions asked return policy. Miss the return window from Amazon? No problem. Just contact BAFX!

User questions & answers

Question:	Is this compatible with a tcl riki tv
Answer:	I am assuming you mean a TCL Roku TV correct? I just purchased this for mine and it works like a charm. With one caveat, if you power it with the USB from the TV, you have to manually turn the TV on to activate power to the USB. If you power it will and external USB power supply you will be able to turn the TV on and off. Also keep in mind the TV's IR receiver is on the bottom of the screen in the middle in a whitish plastic area below the screen.
Question:	Does the transmitter portion need to be directly over the device to be controlled, or can it be a few feet away in line of sight
Answer:	As long as in line of sight.
Question:	Which is the receiver and which is the emitter?? One is larger than the other
Answer:	The picture depicts from left to right the receiver, the emitter and the USB. The receiver is the larger one.
Question:	Where exactly do you put the emitter on the cable box? Only the volume and power are working on the remote
Answer:	I reviewed this item as junk; the emitter being the issue. You need to look through (use a flash lite) the (usually red) cover on the cable box and find its emitter. You then need to place the "all in one' emitter DIRECTLY over it. Good luck getting it to work.

Product description

Now with greater dual band compatibility our kit will work with ALL IR controlled devices!

Want to place the cable box or other A/V devices out of sight yet be able to control them from in front of your TV? Our IR Repeater (aka remote control extender) kit allows you to do just that!

How it works: The kit will relay the IR signal, through wires, from where you are using the remote control to the end device. The IR receiver of the kit (eye) is placed within sight of (within 25’) of where you will use the remote control from. The emitter from the kit is placed over the IR receiver on the device being controlled & each receiver & emitter wire is plugged into the distribution block. Now, when pressing a button on the remote control, the signal will be amplified & sent through the system to your devices!

Kit includes:

1 Distribution block

1 IR Receiver (5’ long tip to tip)

4 Dual head IR emitters for up to 8 devices (Cables are 8.5’ long)

1 Power adapter

Manual

Link to a setup video

1 Year Manufacturer Warranty

Specs

IR receiver cord is 5' long - receiving range up to 25’

Emitter cables are 8.5’ long – emitting range 2-4”

Receiver & emitters can be extended using a 3.5mm Stereo AV extension cable

Distribution block measures approx. 1.9"x4.3"x0.87" & has slots for mounting

Distribution block can be powered by a USB printer cable (NOT included)

Expandable to 3 IR receivers & 6 emitter cables

*IMPORTANT* PLASMA TV’S Plasma TV's emit infrared signals that can interfere with the IR receiver of the repeater (Not applicable to LCD or LED). This can be fixed by placing the IR receiver slightly further away from the plasma TV

• BUILD – Create the A/V setup of your dreams with the help of our Infrared repeater kit. Our kit allows you to place any IR controlled device out of sight of the remote control and still be able to control it. Put the cable box, DVD player & Roku in a closet hidden from view, close the door and STILL be able to use the remote control.
• IMPROVED! Now compatible with ALL IR controlled devices with better performance, no lag & better ease of use. Now also compatible with Marantz devices! Compatible with all brands of components such as: Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!
• WARRANTY & SUPPORT – BAFX Products offers a 1 Year Warranty against manufacturing defects with a simple & super easy claims process. Not to mention our friendly and knowledgeable USA based support who are ready to help answer your questions and assist in getting you setup!
• COMPACT – A smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller IR receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!
• CONTROL – With the provided components you can control up to 8 infrared devices (Expandable to 12 devices) from one location with the included IR Receiver (Expandable to 3 receivers). Extra Receivers and transmitters may be purchased separately.

User questions & answers

Question:	I currently require two remotes to control all my audio/TV equipment. I cannot get them all onto one master remote. Do I need two systems
Answer:	No you do not need two systems. This unit simply relays IR signal(s) sent from any remote to your devices hidden away. You stick one of the four IR blasters coming out of the unit on the IR eye of each of your devices and the IR receiver on the edge of your TV. Then you point any remote at TV and press button. The signal will leave your remote to the IR receiver and through the cord the unit. From there the unit will replay the signal to all 4 IR blasters that are placed on the IR eyes of your devices (STB, DVD, AV Receiver, etc...)
Question:	This item can work with my logitech harmony one remote
Answer:	Yes. The way this system is designed it will basically pick up any remote using IR technology, which is what the Logitech remote uses. Cheers!
Question:	Can anyone say with certainty this WILL work with directv dvr and directv genie plus other components? Seems there are several conflicting opinions
Answer:	I have this BAFX Repeater, and I also have the DTV HR54-700 satellite box. The repeater does NOT work at ALL with this satellite box. The IR signals come from my Philips Pronto TSU7000 - AND the repeater works FINE with all other connected devices Such as my Sharp Aquos TV, the LED Bias Lighting module on the back of that, a Denon receiver, RCA receiver, and a Philips DVD player The Pronto works intermittently with the satellite box by itself - as long as it is NOT too close to the satellite box As soon as I put the BAFX emitter over the IR receiver window - - IR stops working. I've put up to 6 layers of painters tape over the window - - NOTHING. And Yes - - I have verified (watching with a digital camera: NOT an iPhone) - the emitter sends an IR signal when the BAFX system receives one. - SO - - My thoughts: DTV may be using a different IR light wavelength than what is transmitted by the BAFX. The question of course is - - WHY would DTV do that ?? Answer is ea$y to figure out. It's $o you can't u$e an all-in-one remote - - you have to RENT one of their$
Question:	What is the length of the receiver cable
Answer:	The receiver cable length is about 5 feet. You can buy a CAT5 extender setup which allows you to go much further here: https://www.amazon.com/dp/B016VEFI00/ref=cm_sw_em_r_mt_dp_U_GsokEbPHY5B42

Product features

How the IR Repeater Kit works

The setup is very is simple.



You will simply place the included distribution block in a location near where you wish to keep the devices you need to control with your remotes. From this block, you will run the provided IR receiver cable (or the eye of the kit) from the distribution block and place it in a location where you can point the remote control at, this may be on the bezel of the TV, on a shelf ledge, the wall or other such locations. You will need to place this IR receiver no further than 30' from where you will be using the remote control.



Now, plug one of the emitter cables into the distribution block and run that cable to where you have your devices being controlled located. You will place one emitter head from this cable over the IR receiver on the devices being controlled.



Lastly, simply plug the repeater kit into power using the supplied power adapter and you're ready to go!

Compaitibility

Many people wonder if our kit is compatible with a particular device.



Our repeater kit will work with all IR controlled AV devices. This includes but is not limited to devices such as: Logitech, Uverse, Onkyo, Sony, Pioneer, Yamaha, Cisco, Scientific Atlanta, Marantz, Denon, LG, Philips, Verizon Fios, Roku, Charter, Dish Network, DirecTV, Epson & More!



Should you have any troubles getting the BAFX Products IR repeater kit to work with these or any other IR controlled devices the BAFX Products Support team will be more than happy to assist you!



Important note: The repeater kit will NOT work with RF or Bluetooth remote controls

 

Kit Includes

• 1 Distribution block

• 1 IR Receiver cable

• 4 Dual head IR emitters for up to 8 devices

• 1 Power adapter

• Manual

• Link to a setup video



Specs



• IR receiver cable is 5' long tip to tip

• Emitter cables are approximately 8.5' long

• Distribution block measures 1.9" x 4.3" x 0.87"

• Has slots on sides for mounting

• Expandable for more 2 more emitter cables & 2 more receivers

• Dual band compatibility

• Distribution block can be powered by USB printer cable & wall adapter (not included)

• Emitters & Receiver may be extended using standard STEREO headphone extension cables

 

Additional Important Notes

Plugging directly into IR ports on devices: On some devices you may notice IR in/out ports. You MAY be able to use a Male to Male cable to connect our kit with such devices. We cannot promise that this will always work. It will depend on whether the device manufacturer has wired their port the same was as our kit and also handles the signal in the same manner. We have verified that many Onkyo & Denon devices do work with this but cannot make promises as to this.



Plasma TV's: Plasma TV's emit stray infrared signals. In some rare cases these stray signals may interfere with operation of the kit. In such cases simply moving the IR receiver slightly further from the TV will resolve this issue. LED & LCD TVs do not have this problem.



Extending via CAT5 lines: For this we offer a prepackaged CAT5 adapter kit that may be purchased separately. The parts may also be obtained individually on their own as needed.

• IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV; Blue LED in IR Receiver bulb verifies the signal transmission
• Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor; Route the infrared remote control extender cable out of sight with a wall mounted TV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
• Simple installation of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
• USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power; USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger
• Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF); 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote

User questions & answers

Question:	Will this work with newest Spectrum Arris device
Answer:	It works with my new Arris DCX3510M HD DVR box. However the IR reception range is only 7-8 ft max. And you will need a separate USB power supply because the Arris USB ports only work when the box is on.
Question:	How close does the IR emitter need to be to the device receiving the signal
Answer:	The smallest one needs to be right on point to work. You will need a second person to help while you adjust and they try the remote.
Question:	Does it have to be Synced to the remote
Answer:	No. This is a simple device that simply passes on the infrared signal. Whatever the remote shoots into this device's receiver will be transmitted to the other end. It took only minutes to set this up. We put cable box behind the TV screen. Attached the receiver end to the underside of the TV, near current remote sensor just so it is the same target area you are used to, the other end of the extender gets aimed at the cable box on the other side. The cable box has USB so that was used for the power. Amazing product
Question:	What does 10feet mean
Answer:	Means 10 feet long from starting to end.

Product features

Remote Control Solution

The Cable Matters Infrared Extender Cable is the perfect solution for controlling a Blu-ray player, CATV box or another video source from your TV. Use your TV remote even when a soundbar is blocking access to the IR sensor. Connect to home theater components that are concealed in a cabinet or nearby closet.

Important Notes

• Test the cable before attaching with the adhesive backing
• Check that the USB TV port provides 5V USB power or use a USB wall charger
• Not compatible with a set-top box using (RF) radio frequency signals
• Bright sunlight or CFL light bulbs can cause interference

USB Power Boost

• Power with a 1-amp USB wall charger
• USB Y-cable length = 6 Feet

IR Compatibility

• 30-60 KHz receiving frequency
• CFL bulbs or bright light can cause interference

Lightweight Extender Cable

• Flexible wire is easy to secure
• Coil any excess wire with a cable tie

Product description

Designed and sold Exclusively by Infrared Resources.Designed in the USA. 9 feet long with 3.5mm end plug. IR receiver is 38~56kHz

This compact (.53 x 1.12 × .43 ) 1/2 inch wide, 1 inch long and 1/2 inch tall. IR Receiver truly is universal. It works with ALL of the major Cable Set Top and DTA (Digital Transport Adapter) Boxes. Including VERIZON FiOS, Comcast, S/A Scientific Atlanta Explorer ,Except the box models listed below in the Will Not Work list.

Allows you to hide your equipment and operate the equipment remotely. Simple plug and play. Unplug the power from the cable box then plug the IR receiver into the IR IN port. Plug in the power for the box.

NOTE: Not for use in TV (Smart) IR port. The IR port on TV monitors are IR OUT not IR IN

The front IR sensor on the Cable box will disable once the IR receiver is plugged in. RNG models front IR sensor does not disable.

Works With: Samsung STB SMT-H4372,Scientific Atlanta Explorer 46xxHDC Series, 9865HDC,8742HDC Explorer (with IR IN port on the back panel) Comcast X1 RNG Set Top Boxes VERIZION HD DVR QIP 7xxx series and VM1101 model Cisco CHS435HDC,CH335HDC HD DVR, LG LST-4600A HD PACE DC551P,DC55 PACE/ DC700X Apache. Comcast X1, RNG110, PACE/CiscoRNG150, RNG100, PACE TDC787X HD, PACE TDC 575D DVR, DC50X, DCH100, DCX3300, DCX3220e, DCX3400M, DCX700, DCX3416, DCX3425, DCX3432, DCX3501, DCX3600, MVIX 760 HD Media Player. DTA50,DTA250 and other DTA models

Will Not Work With: Motorola DCT or DCH Series, QIP2500, SA Explorer 4200, 4200HDC,4240 HDC4250,4250HD,8240HDC,8260HDC,8200 series 8300, 8300HD , Series,DC60xu. 2100DHCT, 3100DHCT,3250HD, Verizon QIP 6416-2 , 6000 series Motorola DCX3200-M, DCX3400, DCX3510M, DISH, Direct TV, AV STEREO RECEIVERS(Harmon Kardon etc) OR IR REPEATER SYSTEMS,or directly plugged into TV’s.

. All trademarks are the property of their respective owners.

• AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR (NOT SERIAL) LOCATED ON THE BACK OF THE CABLE BOX. LOOK UP YOUR MAKE AND MODEL NUMBER USER GUIDE ONLINE. REFER TO THE BACK PANEL PAGE. PLEASE EMAIL OR CALL US IF YOU REQUIRE OUR ASSISTANCE. All units are bench tested and working before leaving the factory. Refer to the trouble shooting section on the original package if need be.
• Works with VERIZON FiOS, Comcast, Scientific Atlanta Explorer,Cisco,PACE,Motorola,Arris, and DTA Set Top Boxes Will NOT work with SA 4000HDC series,4200/HDC,4240,4250/HDC,8300/HD,8240/8260HDC box, A/V Receivers,TVs or IR Repeater kits
• LOOK AT SIDE PICTURES TO COMPARE SIZE OF COMPETITORS. Ours is only 1/2in wide. Thinnest available! Perfect size to blend into current flat screen frames.Hide your cable box in a cabinet, down in the basement or A/V rack or room using this small (.53 wide x 1.12 long x .43i tall )IR receiver with 9 ft lead to 3.5mm gold stereo plug.
• REPLACES Cisco/Scientific Atlanta IR Extender 1004648,4029013,4022323
• 25 Years Experience Manufacturing And Supplying The Cable And Hospitality Industry

User questions & answers

Question:	States it works with 9865hdc but is not. is this supposed to
Answer:	It should work. Try unplugging the power from the box for 30 seconds while keeping the IR receiver plugged in. The box will reboot.
Question:	Will this work with Cisco explorer 8640hdc
Answer:	when plugged into the IR port on the Cisco Explorer 8640hdc will the the IR on the front of the 8640 also still work?
Question:	Will this emitter work with an Xantech connecting block
Answer:	It will not work with Xantech. They have a different pin out and the block also requires 12v as ours is 5v. We do offer our IRP repeater kits if interested.
Question:	how it works? do I need to buy two? one goea do cable box and the other to the tv
Answer:	What is the cable box model number? You only nee one to plug into the IR IN port on the back of the box. The receiver is placed on or near the TV frame