13 best remote control with extender receivers

Product description

Now with greater dual band compatibility our kit will work with ALL IR controlled devices!

Want to place the cable box or other A/V devices out of sight yet be able to control them from in front of your TV? Our IR Repeater (aka remote control extender) kit allows you to do just that!

How it works: The kit will relay the IR signal, through wires, from where you are using the remote control to the end device. The IR receiver of the kit (eye) is placed within sight of (within 25’) of where you will use the remote control from. The emitter from the kit is placed over the IR receiver on the device being controlled & each receiver & emitter wire is plugged into the distribution block. Now, when pressing a button on the remote control, the signal will be amplified & sent through the system to your devices!

Kit includes:

1 Distribution block

1 IR Receiver (5’ long tip to tip)

4 Dual head IR emitters for up to 8 devices (Cables are 8.5’ long)

1 Power adapter

Manual

Link to a setup video

1 Year Manufacturer Warranty

Specs

IR receiver cord is 5' long - receiving range up to 25’

Emitter cables are 8.5’ long – emitting range 2-4”

Receiver & emitters can be extended using a 3.5mm Stereo AV extension cable

Distribution block measures approx. 1.9"x4.3"x0.87" & has slots for mounting

Distribution block can be powered by a USB printer cable (NOT included)

Expandable to 3 IR receivers & 6 emitter cables

*IMPORTANT* PLASMA TV’S Plasma TV's emit infrared signals that can interfere with the IR receiver of the repeater (Not applicable to LCD or LED). This can be fixed by placing the IR receiver slightly further away from the plasma TV

• BUILD – Create the A/V setup of your dreams with the help of our Infrared repeater kit. Our kit allows you to place any IR controlled device out of sight of the remote control and still be able to control it. Put the cable box, DVD player & Roku in a closet hidden from view, close the door and STILL be able to use the remote control.
• IMPROVED! Now compatible with ALL IR controlled devices with better performance, no lag & better ease of use. Now also compatible with Marantz devices! Compatible with all brands of components such as: Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!
• WARRANTY & SUPPORT – BAFX Products offers a 1 Year Warranty against manufacturing defects with a simple & super easy claims process. Not to mention our friendly and knowledgeable USA based support who are ready to help answer your questions and assist in getting you setup!
• COMPACT – A smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller IR receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!
• CONTROL – With the provided components you can control up to 8 infrared devices (Expandable to 12 devices) from one location with the included IR Receiver (Expandable to 3 receivers). Extra Receivers and transmitters may be purchased separately.

User questions & answers

Question:	I currently require two remotes to control all my audio/TV equipment. I cannot get them all onto one master remote. Do I need two systems
Answer:	No you do not need two systems. This unit simply relays IR signal(s) sent from any remote to your devices hidden away. You stick one of the four IR blasters coming out of the unit on the IR eye of each of your devices and the IR receiver on the edge of your TV. Then you point any remote at TV and press button. The signal will leave your remote to the IR receiver and through the cord the unit. From there the unit will replay the signal to all 4 IR blasters that are placed on the IR eyes of your devices (STB, DVD, AV Receiver, etc...)
Question:	This item can work with my logitech harmony one remote
Answer:	Yes. The way this system is designed it will basically pick up any remote using IR technology, which is what the Logitech remote uses. Cheers!
Question:	Can anyone say with certainty this WILL work with directv dvr and directv genie plus other components? Seems there are several conflicting opinions
Answer:	I have this BAFX Repeater, and I also have the DTV HR54-700 satellite box. The repeater does NOT work at ALL with this satellite box. The IR signals come from my Philips Pronto TSU7000 - AND the repeater works FINE with all other connected devices Such as my Sharp Aquos TV, the LED Bias Lighting module on the back of that, a Denon receiver, RCA receiver, and a Philips DVD player The Pronto works intermittently with the satellite box by itself - as long as it is NOT too close to the satellite box As soon as I put the BAFX emitter over the IR receiver window - - IR stops working. I've put up to 6 layers of painters tape over the window - - NOTHING. And Yes - - I have verified (watching with a digital camera: NOT an iPhone) - the emitter sends an IR signal when the BAFX system receives one. - SO - - My thoughts: DTV may be using a different IR light wavelength than what is transmitted by the BAFX. The question of course is - - WHY would DTV do that ?? Answer is ea$y to figure out. It's $o you can't u$e an all-in-one remote - - you have to RENT one of their$
Question:	What is the length of the receiver cable
Answer:	The receiver cable length is about 5 feet. You can buy a CAT5 extender setup which allows you to go much further here: https://www.amazon.com/dp/B016VEFI00/ref=cm_sw_em_r_mt_dp_U_GsokEbPHY5B42

Product features

How the IR Repeater Kit works

The setup is very is simple.



You will simply place the included distribution block in a location near where you wish to keep the devices you need to control with your remotes. From this block, you will run the provided IR receiver cable (or the eye of the kit) from the distribution block and place it in a location where you can point the remote control at, this may be on the bezel of the TV, on a shelf ledge, the wall or other such locations. You will need to place this IR receiver no further than 30' from where you will be using the remote control.



Now, plug one of the emitter cables into the distribution block and run that cable to where you have your devices being controlled located. You will place one emitter head from this cable over the IR receiver on the devices being controlled.



Lastly, simply plug the repeater kit into power using the supplied power adapter and you're ready to go!

Compaitibility

Many people wonder if our kit is compatible with a particular device.



Our repeater kit will work with all IR controlled AV devices. This includes but is not limited to devices such as: Logitech, Uverse, Onkyo, Sony, Pioneer, Yamaha, Cisco, Scientific Atlanta, Marantz, Denon, LG, Philips, Verizon Fios, Roku, Charter, Dish Network, DirecTV, Epson & More!



Should you have any troubles getting the BAFX Products IR repeater kit to work with these or any other IR controlled devices the BAFX Products Support team will be more than happy to assist you!



Important note: The repeater kit will NOT work with RF or Bluetooth remote controls

 

Kit Includes

• 1 Distribution block

• 1 IR Receiver cable

• 4 Dual head IR emitters for up to 8 devices

• 1 Power adapter

• Manual

• Link to a setup video



Specs



• IR receiver cable is 5' long tip to tip

• Emitter cables are approximately 8.5' long

• Distribution block measures 1.9" x 4.3" x 0.87"

• Has slots on sides for mounting

• Expandable for more 2 more emitter cables & 2 more receivers

• Dual band compatibility

• Distribution block can be powered by USB printer cable & wall adapter (not included)

• Emitters & Receiver may be extended using standard STEREO headphone extension cables

 

Additional Important Notes

Plugging directly into IR ports on devices: On some devices you may notice IR in/out ports. You MAY be able to use a Male to Male cable to connect our kit with such devices. We cannot promise that this will always work. It will depend on whether the device manufacturer has wired their port the same was as our kit and also handles the signal in the same manner. We have verified that many Onkyo & Denon devices do work with this but cannot make promises as to this.



Plasma TV's: Plasma TV's emit stray infrared signals. In some rare cases these stray signals may interfere with operation of the kit. In such cases simply moving the IR receiver slightly further from the TV will resolve this issue. LED & LCD TVs do not have this problem.



Extending via CAT5 lines: For this we offer a prepackaged CAT5 adapter kit that may be purchased separately. The parts may also be obtained individually on their own as needed.

Product description

This IR repeater extension cable can extend the range of a remote control. This IR repeater cable lets you store your equipment out of sight, yet still operate it with its infrared remote control. The kit includes an IR receiver with a 6 foot cord, which you need to place so that you can point your remote control at it. The receiver then transmits the signal to the repeater, which relay it out to the transmitter bulb that should be placed over the IR "eye" on your component.





Package Content:



1xCable - BLACK(Receiver and Emitter)

• This Infrared Repeater Cable applies to all remote control devices from 38 to 56 khz
• IR Repeater Extension controls Audio Video Components in Entertainment Cabinets or Equipment Closets using Existing IR Remote Controls
• Come with adhesive backing sticks directly onto different devices
• 1 Receiver, 1 Emitter, Connects to USB port on TV or home theater device for power
• Total Length: 10 feet - 3 meter - black

User questions & answers

Question:	My Cable box is behind glass and the remote doesn't work. Will this let me have my cable box behind the glass cabinet
Answer:	OK - I placed a 4mm ( 1/6 of an inch ) thick piece of glass in front of my IR receiver head .... this had no effect on the ability to control my Video Recorder ... which is in another room at the end pf a 15m ( 49ft. ) audio extension cable. This Repeater is great - don't buy a cheaper one ... I have had to throw my cheaper one away - even with my Video Remote next to the IR receiver, it did not work. This Repeater is very good - it is switched off when not in use, is controlled from across the room when switched on, and from a distance of 5.5m ( 18ft ) works perfectly.
Question:	Does it work with nvidia shield? just plugging it in to one of the usb ports
Answer:	Yes,the receiver wire is about 10 ft , you can extend the receiver wire to 50-75ft by using the extension cable in our store, here is the link : https://www.amazon.com/Infrared-Extension-Extending-Receiver-Emitter/dp/B07GZXK5MH/ref=sr_1_18?m=A3PRNU38RTZIQX&s=merchant-items&ie=UTF8&qid=1541265676&sr=1-18&th=1
Question:	Will this works to program a led sign
Answer:	3 meters, and can be extended with our ir extension cable in our store ,here you go : https://www.amazon.com/Repeater%EF%BC%8CIR-Extender-Repeater-%EF%BC%88Receiver%EF%BC%8CEmitters-Adaptor%EF%BC%89/dp/B07CT5TBNG/ref=sr_1_13?m=A3PRNU38RTZIQX&s=merchant-items&ie=UTF8&qid=1539578052&sr=1-13&th=
Question:	This came with no instructions. Which end is the emitter and which end is the receiver
Answer:	Thank you so much for your question, this product is made in China.

Product description

The *ALL NEW* BAFX Products Wireless IR Repeater Kit / remote control extender! Complete your A/V setup with ease! This handy little kit allows you to hide all your IR controlled A/V equipment behind closed doors, or in another room all together, while still being able to control them with your current IR remote controls! (Does not support RF only remote controls, such as some Roku players)

Rather than sending the IR signal via cables & wires like our standard IR repeater kits, these kits repeat your IR commands wirelessly!

With our brand new wireless kit, there is no need to run a wire from the IR receiver end of your setup to where the devices are located. Simply plug the IR receiver end in the room where you want to control your devices from and plug the emitter end into an outlet near the devices you are trying to control and then attach one emitter head to each device! Simple as that! No more messy wires to run through walls or floors!

IMPORTANT:

More than one wireless kit may be used per home however, if you have two devices that both can be controlled with the same remote control, please be aware that if they are both connected to the repeater kit, they will BOTH respond to the commands coming from the repeater kit!

Comes with a fenominal and easy to use 1 Year warranty against manufacturing defects from BAFX Products

Specs:

Transmitting distance 50-300ft (walls/floors will reduce distance)

Generally suitable for homes 3-5,000SQFT or less depending on home construction

Distance of IR receiver from remote control, up to 25'

5V power

What's included:

2X IR Receiver

1X Quad head emitter cable

2X Power wall adapter

1X Transmitter block

1X Receiver block

Link to setup video

Manual

1 Year manufacturer warranty against defects

(Please note, this IR repeater kit will only send remote control IR signals, you will still need to run a line for you actual A/V signals)

• Hide your IR remote controlled devices completely out of sight! In another room, in the cabinet or wherever you can imagine!
• Does your remote control stop working if your cable box is 20' away but you want to put the cable box downstairs? Not a problem with our wireless remote control extender!
• Suitable for most homes 3-5,000 SQFT or less. Our wireless IR extender can span 50-300ft, depending on your homes contstruction which can reduce the distance it may span.
• Sit and change channels on the cable box while the box is in the basement and your upstairs.
• Simple to follow setup video, helpful technical support and an awesome, 1 Year manufacturer warranty from BAFX Products!

User questions & answers

Question:	Does this work with direct tv mini genie
Answer:	It should work with any IR device.
Question:	Can you cover up the red light or will it affect signal? The red light is really distracting
Answer:	If your referring to the red light on the IR receiver, the little black thing that catches the signal from your remote and is stuck to the front of your TV, don’t put anything in front of it. It will block the signal. You can buy another one that has no red light. Just a clear plastic receiver that lights up when you press a button on the remote.
Question:	Is there a longer antenna available? I have two walls in between the cable box and tv and the signal is very weak or doesn’t work most of the time
Answer:	Hi there, I am with BAFX Products. A long antenna is not available however assuming that these are standard construction walls, the kit should be able to pass through them without issue. Please contact us directly so that we can assist further and help figure this out with you! We look forward to hearing from you! Regards, BAFX Products
Question:	What is the rf frequency of the device? i need to homologate, can you provide the rf specs
Answer:	Hi there, I am with BAFX Products. The kit operates on 433.92MHz If there is anything else we can help with, please do let us know. Best regards, BAFX Products

• STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for
• COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!
• SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the IR receiver on the device you wish to control. Lastly, place the IR receiver end in the line of sight of your remote control (no further than 28' from remote control) and that's it! You're all set!
• RESISTANT to interference from stray infrared sources such as plasma TV's & CFL lightbulbs! Worried that your plasma TV or CFL bulbs will cause interference with this IR repeater just like your old IR repeater you bought years ago? Worry no more! With our new plasma resistant technology nearly all of these trouble causing stray IR signals are filtered out! No more randomly changing channels or flashing lights caused by your TV or lightbulbs!
• EXCELLENT MANUFACTURER WARRANTY from BAFX Products. Even though this is extremely inexpensive, BAFX Products stands behind everything we sell or we won't sell it. Your all-in-one IR extender is covered by our 1 year warranty against manufacturing defects and is super easy & simple to claim should the need arise! We also extend Amazon's normal 30 day return period with our 60 day, no hassle, no questions asked return policy. Miss the return window from Amazon? No problem. Just contact BAFX!

User questions & answers

Question:	Is this compatible with a tcl riki tv
Answer:	I am assuming you mean a TCL Roku TV correct? I just purchased this for mine and it works like a charm. With one caveat, if you power it with the USB from the TV, you have to manually turn the TV on to activate power to the USB. If you power it will and external USB power supply you will be able to turn the TV on and off. Also keep in mind the TV's IR receiver is on the bottom of the screen in the middle in a whitish plastic area below the screen.
Question:	Does the transmitter portion need to be directly over the device to be controlled, or can it be a few feet away in line of sight
Answer:	As long as in line of sight.
Question:	Which is the receiver and which is the emitter?? One is larger than the other
Answer:	The picture depicts from left to right the receiver, the emitter and the USB. The receiver is the larger one.
Question:	Where exactly do you put the emitter on the cable box? Only the volume and power are working on the remote
Answer:	I reviewed this item as junk; the emitter being the issue. You need to look through (use a flash lite) the (usually red) cover on the cable box and find its emitter. You then need to place the "all in one' emitter DIRECTLY over it. Good luck getting it to work.

Product description

IR RECEIVER CABLE.(PRODUCT DESCRIPTION)

Do you need an IR receiver that works perfectly, and will help put your Comcast Cable Box or other STP boxes out of view? If yes then you need our IR extender cable!.

Our 38-56kHz IR receiver will help you hide your entertainment systems in a less obtrusive view byextending the infrared signal received from the remote control and relaying via the wire back to the set top box or cable box. You may now hide it from view in a closet, cabinet, behind a closed door, in another room and still able to control it with your IR remote control.

WHY TRUST US?

Check out the features of our IR Receiver Cable.

1.EASY TO SETUP AND USE:

Plug the cable into the IR input jack located at the back of the STP box, then place the IR sensor receiver within a direct line of sight from your remote control.

2.CLEAN LOOK:

IR Extender Cable helps you to establish a clean,uncluttered look with no wires or cables in sight.

3.WIDE COMPACTIBILITY:

works with a wide range of Infrared remote control devices with a range of 38-56kHz.

Package Content:

2 x IR Receiver Cable

• ★ PLUG AND PLAY–Our IR extender cable is easy to install and use. Just plug the 3.5mm jack into an IR input port of the device.
• ★ UNIVERSAL COMPATIBILITY – Suitable for a broad range of 38-56kHzinfrared devices with an IR input port and remote control such as AV equipment and cable STB boxes.
• ★ 10FT CABLE – 10 feet(3m) LongCable with 3.5mm plug allows you to extend the signal receiver to a suitable position.
• ★ CLEAN LOOK:Our IR Repeater system is ideal for those who want to conceal their A/V component equipment inside a closet or cabinet for a clean, stylish look.
• ★ FLEXIBLE+ RISK-FREE PURCHASE–You can now control your home theater, cable boxes, etc. from behind thecabinet, closet or even the other room. If for any reason, you are not 100% satisfied with the product, you can send it back to us, and we will refund your money! DON’T CHECK THE NEXT LISTING! JUST ORDER NOW!!!

User questions & answers

Question:	Can this be used with a Xantech Connecting Block
Answer:	I dont believe so

Product description

Multizone: Protect from Interference Most IR extenders are programmed to pass any signal that is sent through the receiver. Sometimes this may disrupt your setup as a few devices in your closet run on a similar IR frequency and cause interference with one another. The Multizone feature protects your devices from interference from other devices. This gives you the ability to have certain devices controlled only from specific areas in your setup. This has been a requested feature from many of our customers as they have extended IR signals but unintentionally were controlling two devices located in the same space. Cable boxes have especially been a pain since multiple cable boxes are easier to have based in the same area. Now with the BlastIR Wireless Multizone you are able to ensure you will only control the box that is attached to one of your TVs and not the other. The Channel IR System The Multizone feature works on a 10-channel system, this system gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfereing with one another. The system also gives you the option of using any number of transmitters or receivers on any given channel. This gives you complete freedom of choice for where your displays and devices can be placed without having to complicate your setup. The BlastIR Wireless Multizone Receivers will only communicate with the BlastIR Wireless Multizone Emitters that are set to the same channel. If you happen to own the classic BlastIR Wireless, this product will also work with it. Channel 0 on this product will allow IR signals to be sent between the two diffferent versions.

• NOTE Some devices us RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices.
• 10-channel system that gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfering with one another
• Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet
• Known compatibility issues with: Yamaha HTR 6140 and Arris DCX 3520E-M
• Control any IR device from a distance. Blu-Ray Players, Cable and DVR Boxes, AV Receivers, Logitech Harmony Devices, Anything else that uses an IR signal!

User questions & answers

Question:	I can't figure out where the connections (V+/G/ST/IR) go from the wall receiver to the main unit (+12VDC/GND/Status/Signal) - help pls
Answer:	They connect from from the receiver to the main unit via standard telephone cable (CAT3) not supplied. V+ is +12VDC, G is GND(or the minus side of the power supply), ST is the status LED and IR is the signal.
Question:	Does this work with FIOS 7xxx HD DVRs
Answer:	It works perfect with va comcast DVR. So I magazine other DVRs will work. You'll have to find the right spots to place the 2 sensors for best performance. The only device that the infrared device doesn't work well with is an older Sony reciever I have hooked up. I only get volume control with this.
Question:	What is the maximun length of cable that the BlastIR can support? Will it reach over 150ft Cat5e cable to send it's repeated signal
Answer:	Yes.
Question:	can I operate 2 televisions off of 1 cable box
Answer:	I have a TV and cable box in my man cave and HDMI ran overhead to a TV in adjoining exercise room. I have an HDMI splitter in the man cave. I want to simply be able to use the cable remote from the man cave TV to change channels from the exercise room, going through one wall. I'll just take the remote to whichever room I'm in. Do I need anything else other than this item. I couldn't ask all this in the questions, maybe someone will see this answer, sounds similar. I'm already operating 2 TVs off a single cable box with a splitter but want to use the remote in both rooms.

Product features

Multi-Zone Control

The BlastIR Wireless Pro supports up to 10 zones with independent sending/receiving frequencies. (kind of like different channels on a walkie-talkie). You can change the zone by using a very small rotating switch located at the bottom of the receiver and emitter pucks. The Receivers will only communicate with the Emitters that are set to the same zone. You can also purchase extra Emitters, or Receivers individually if you do not need an extra full pair.

All-to-All

The BlastIR Wireless Pro can be set to send the signal from All Receivers To All emitters by setting all the units to the same "Channel" or "Zone"

Zone-To-Zone

The BlastIR Wireless Pro can be set to only send the Signal from one Receiver to specific emitters.

Troubleshooting and Support

Troubleshooting: If you're having trouble setting up your BlastIR PRO, it is very easy to troubleshoot. The videos on Sewelldirect will show you how easy it is to set up and troubleshot your BlastIR.

Please Note : This product is NOT Compatible with the Yamaha HTR 6140, Arris DCX 3520E-M, or the OSD ATM-7 Speaker Selector.

• IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV; Blue LED in IR Receiver bulb verifies the signal transmission
• Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor; Route the infrared remote control extender cable out of sight with a wall mounted TV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
• Simple installation of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
• USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power; USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger
• Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF); 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote

User questions & answers

Question:	Will this work with newest Spectrum Arris device
Answer:	It works with my new Arris DCX3510M HD DVR box. However the IR reception range is only 7-8 ft max. And you will need a separate USB power supply because the Arris USB ports only work when the box is on.
Question:	How close does the IR emitter need to be to the device receiving the signal
Answer:	The smallest one needs to be right on point to work. You will need a second person to help while you adjust and they try the remote.
Question:	Does it have to be Synced to the remote
Answer:	No. This is a simple device that simply passes on the infrared signal. Whatever the remote shoots into this device's receiver will be transmitted to the other end. It took only minutes to set this up. We put cable box behind the TV screen. Attached the receiver end to the underside of the TV, near current remote sensor just so it is the same target area you are used to, the other end of the extender gets aimed at the cable box on the other side. The cable box has USB so that was used for the power. Amazing product
Question:	What does 10feet mean
Answer:	Means 10 feet long from starting to end.

Product features

Remote Control Solution

The Cable Matters Infrared Extender Cable is the perfect solution for controlling a Blu-ray player, CATV box or another video source from your TV. Use your TV remote even when a soundbar is blocking access to the IR sensor. Connect to home theater components that are concealed in a cabinet or nearby closet.

Important Notes

• Test the cable before attaching with the adhesive backing
• Check that the USB TV port provides 5V USB power or use a USB wall charger
• Not compatible with a set-top box using (RF) radio frequency signals
• Bright sunlight or CFL light bulbs can cause interference

USB Power Boost

• Power with a 1-amp USB wall charger
• USB Y-cable length = 6 Feet

IR Compatibility

• 30-60 KHz receiving frequency
• CFL bulbs or bright light can cause interference

Lightweight Extender Cable

• Flexible wire is easy to secure
• Coil any excess wire with a cable tie

• 【Support Full HD 1080p @60Hz, 2.4G/5G Wireless Transmission】 This wireless HDMI extender input/output resolution supports 480i / 576i ~ 1080P @ 50 / 60Hz, SVGA ~ WUXGA. We use the international common 2.4G/5G wireless dual-band transmission signal, so we can get faster transmission speed and stronger anti-interference ability. You’d better use 5G signal channel to get more stable and fast using experience.
• 【Wireless Transmit 100m 328ft, Can through Wall】 In an open field, this wireless hd sender HDMI wireless signal can up to 100m 328ft(line of sight), if through 1 wall the signal can transmit 10-20m/32ft-65ft. (NOTE: Do NOT install multiple kits in the same location as it may cause signal interference.)
• 【IR Remote Control, Plug and Play】Built in IR signal extension feature, you can control source device at the receiver. Imagine you have a DVD player in your media room and a TV in your living room, while you are in the living room, you can still use your DVD remote to control the DVD player with IR CONTROL EXTENSION function. True Plug and Play, don’t need set up anything, don’t need download any driver, NO WIFI , NO messy cables.
• 【Low Latency, With Local Loop-out】There’s a delay/latency time (0.3 seconds or less) due to data compression between wireless transmitter and receiver, Not recommended for real-time applications, such as PC gaming. But the loop-out has a zero latency and can use for a local display. Wireless AV sender is the best choice for your office meeting church and home use.
• 【Support Many HDMI Devices, Signal Point to Point Transmit】 This wireless hd sender and receiver kit can work with most HDMI-equipped devices, including DVD,DVR,IPTV,CCTV blu-ray players, set-top boxes, cable/satellite boxes and computer systems. can’t support one sender many receivers,signal point-point transmit. and this wireless HDMI extender support free lifetime technical support and free 1 Year Manufacturer Warranty. Please feel free contact us if you need help, any email will reply in 24

Product features

100M/328FT HDMI WIRELESS EXTENDER KIT

Function & Features

1.Full HD 1080P Video and Perfect Audio Quality

Wireless hd sender delivers up to 1080p@50/60Hz,Perfect for connecting Gaming Consoles, Cable Set-top Boxes and Media Players.

2. Strong anti-interference Faster Transmission Speed

Wireless HDMI adopts smart 5GHz dual-band WIFI Wireless transmission schemes and having advantages of long transmission distance, no splash, no snow

3. Wirelessly Transmit Up to 328ft/100m,Through Wall/Floor up to 65ft

Wireless HDMI extender can transmit HDMI signal no need wiring plug and play. Can transmit HD signal up to 328 feet away in line of sight; can work through walls and floors up to 65ft

4. Built-in IR remote control With HDMI Loop-out

This wireless transmitter and receiver supports IR Remote controller, you can control signal source equipment at the receiver. HDM Loop-out has a zero latency and can use for a local display.

5. Used for Home Theater Office Meeting Project Church

Can use at home,such as you and your family can share the same TV view in different room. Can use at office or church wireless long distance transmission.

6. Standard Accessories

1 x Transmitter, 1 x Receiver, 2 x Power Adaptor, 2x IR Extender Cable, 1 x User Manual

Support 1080P FULL HD

This wireless HDMI extender input/output resolution supports 480i / 576i ~ 1080P @ 50 / 60Hz, SVGA ~ WUXGA, you can enjoy a HD view

Support Penetrate Wall

If you need to transmit signal through walls in your case, please be kindly informed that it is easy passing through glass or wood wall, but you should keep both device stay within 10m/30t in the case of concrete wall.

Support Long Distance Transmit

In an open field, this wireless hd sender HDMI wireless signal can up to 100m 328ft(line of sight),

it can widely used in office, church, meeting.

Package Inlcude

1 Transmitter

1 Receiver

2 IR Cabel

2 Power Adapter

1 Uer Manual

(No Remote in Package)

Support 2.4GHz and 5GHz, fast transmit

Support 2.4G/5G wireless dual-band transmission signal, so can get faster transmission speed and stronger anti-interference ability. You’d better use 5G signal channel to get more stable and fast using experience.

Support IR Remote and HDMI Loop-out

Support Many HDMI Devices, Signal Point to Point Transmit. The HDMI loop-out has a zero latency can use for a local display. IR remote allow you control source device at the receiver.

Product description

The BAFX Products Extra IR Receivers are designed to be used with the BAFX Products SINGLE ZONE IR Repeater & Remote Control Extender Kits. You can use these IR sensors to expand your kit to cover more rooms in your home allowing you to control all of our IR devices from multiple locations. Kids have the television turned up too loud at night? Install an extra IR receiver in your bedroom so you can turn it down without getting out of bed!

Just like our remote control extend kit, our IR receiver will work with all makes/models of IR remote controls & devices from Charter, Cisco, Harmon Kardon, LG, Logitech Harmony, Pioneer, Roku, Samsung, Scientific Atlanta, Spectrum, Time Warner, Uverse, Yamaha & more!

Have a Problem using this with any device? No worries! BAFX Products has helpful, friendly, USA based support staff ready and waiting to assist you. They are well versed in getting things up and running as quickly as possible so you can relax and enjoy your favorite TV shows!

Specs

Overall length: 5 Feet

Cable length: 4’

Dual band compatible

Plasma resistant

25’ Maximum sensing distance

Up 45° Remote control angle

NO HASSLE 1 Year manufacturer warranty against manufacturing defects!

• EXPAND – Increase & Expand the reach of your current Single Zone BAFX Products IR Remote Control Extender kit! Add more receivers to more rooms to control your cable box, receiver, media player and more from more locations in your home, office or business.
• FUNCTIONALITY – Our IR sensors can receive signals from 25’ away and up to a 45° angle from the remote control. Can be used with any IR remote controls. Cable is 5’ long from tip to tip with actual cable length of 4’ 10”. Works with any Make model of remote controls as long as they use Infrared technology.
• COMPATABILITY – Compatible with the BAFX Products Single Zone IR Repeater / Remote Control Extender Kit ONLY! May not work with other brands of Infrared Repeater Kits! Does NOT work with BAFX Products Triple Zone or Wireless Kits!
• IMPORTANT – This IR Receiver is not designed to be plugged directly into a devices IR port. Doing so will not work and may cause undesirable operation of your device.
• WARRANTY – 1 Year warranty against manufacturing defects provided by BAFX Products. Don’t worry if something goes wrong, BAFX Products is ready to help with friendly USA based support!

User questions & answers

Question:	Will this work with the bafx bafx
Answer:	this item comes with an 8 inch extension rod, and additional ones are available for purchase its part number 1234
Question:	How well will this work in sunlight
Answer:	We don't have an ex5260 to test but from look at an image of the bottom of the projector, it looks like it will work with our mounting hardware. If it doesn't you can return for a refund. Cheers - Michael
Question:	Will this work if installed behind an acoustically transparent projector screen
Answer:	The ALZO suspended Drop Ceiling projector mount allows for positioning the projector left/right and front/back to balance the weight so that the assembly will hang straight down from the ceiling.
Question:	What is the outer diameter of the body of the peephole IR receiver
Answer:	No. The drop bar is a fixed length pipe. The projector is always fixed at the same height.

Product description

Designed and sold Exclusively by Infrared Resources.Designed in the USA. 9 feet long with 3.5mm end plug. IR receiver is 38~56kHz

This compact (.53 x 1.12 × .43 ) 1/2 inch wide, 1 inch long and 1/2 inch tall. IR Receiver truly is universal. It works with ALL of the major Cable Set Top and DTA (Digital Transport Adapter) Boxes. Including VERIZON FiOS, Comcast, S/A Scientific Atlanta Explorer ,Except the box models listed below in the Will Not Work list.

Allows you to hide your equipment and operate the equipment remotely. Simple plug and play. Unplug the power from the cable box then plug the IR receiver into the IR IN port. Plug in the power for the box.

NOTE: Not for use in TV (Smart) IR port. The IR port on TV monitors are IR OUT not IR IN

The front IR sensor on the Cable box will disable once the IR receiver is plugged in. RNG models front IR sensor does not disable.

Works With: Samsung STB SMT-H4372,Scientific Atlanta Explorer 46xxHDC Series, 9865HDC,8742HDC Explorer (with IR IN port on the back panel) Comcast X1 RNG Set Top Boxes VERIZION HD DVR QIP 7xxx series and VM1101 model Cisco CHS435HDC,CH335HDC HD DVR, LG LST-4600A HD PACE DC551P,DC55 PACE/ DC700X Apache. Comcast X1, RNG110, PACE/CiscoRNG150, RNG100, PACE TDC787X HD, PACE TDC 575D DVR, DC50X, DCH100, DCX3300, DCX3220e, DCX3400M, DCX700, DCX3416, DCX3425, DCX3432, DCX3501, DCX3600, MVIX 760 HD Media Player. DTA50,DTA250 and other DTA models

Will Not Work With: Motorola DCT or DCH Series, QIP2500, SA Explorer 4200, 4200HDC,4240 HDC4250,4250HD,8240HDC,8260HDC,8200 series 8300, 8300HD , Series,DC60xu. 2100DHCT, 3100DHCT,3250HD, Verizon QIP 6416-2 , 6000 series Motorola DCX3200-M, DCX3400, DCX3510M, DISH, Direct TV, AV STEREO RECEIVERS(Harmon Kardon etc) OR IR REPEATER SYSTEMS,or directly plugged into TV’s.

. All trademarks are the property of their respective owners.

• AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR (NOT SERIAL) LOCATED ON THE BACK OF THE CABLE BOX. LOOK UP YOUR MAKE AND MODEL NUMBER USER GUIDE ONLINE. REFER TO THE BACK PANEL PAGE. PLEASE EMAIL OR CALL US IF YOU REQUIRE OUR ASSISTANCE. All units are bench tested and working before leaving the factory. Refer to the trouble shooting section on the original package if need be.
• Works with VERIZON FiOS, Comcast, Scientific Atlanta Explorer,Cisco,PACE,Motorola,Arris, and DTA Set Top Boxes Will NOT work with SA 4000HDC series,4200/HDC,4240,4250/HDC,8300/HD,8240/8260HDC box, A/V Receivers,TVs or IR Repeater kits
• LOOK AT SIDE PICTURES TO COMPARE SIZE OF COMPETITORS. Ours is only 1/2in wide. Thinnest available! Perfect size to blend into current flat screen frames.Hide your cable box in a cabinet, down in the basement or A/V rack or room using this small (.53 wide x 1.12 long x .43i tall )IR receiver with 9 ft lead to 3.5mm gold stereo plug.
• REPLACES Cisco/Scientific Atlanta IR Extender 1004648,4029013,4022323
• 25 Years Experience Manufacturing And Supplying The Cable And Hospitality Industry

User questions & answers

Question:	States it works with 9865hdc but is not. is this supposed to
Answer:	It should work. Try unplugging the power from the box for 30 seconds while keeping the IR receiver plugged in. The box will reboot.
Question:	Will this work with Cisco explorer 8640hdc
Answer:	when plugged into the IR port on the Cisco Explorer 8640hdc will the the IR on the front of the 8640 also still work?
Question:	Will this emitter work with an Xantech connecting block
Answer:	It will not work with Xantech. They have a different pin out and the block also requires 12v as ours is 5v. We do offer our IRP repeater kits if interested.
Question:	how it works? do I need to buy two? one goea do cable box and the other to the tv
Answer:	What is the cable box model number? You only nee one to plug into the IR IN port on the back of the box. The receiver is placed on or near the TV frame

Product description

Infrared External Receiver for Verizon FiOS cable boxes. Simple plug and play. Plugs directly into the IR IN port on the back of the cable box. The IR receiver mounts on or near your TV . It will work with QIP7000 series, VMS1100, IPC1100,,IPC4100CHS335,CHS435, DTA271, DTA50 etc. Will not work. QIP2500 or QIP6000 series, SA 4000HDC series,4200/HDC,4240,4250/HDC,8300/HD,8240/8260HDC box , AV Stereo receivers, IR Connecting block Repeater kits, or TV sets. Copyright 2017 Infrared Resources LLC All rights reserved

• AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR LOCATED ON THE BACK OF THE CABLE BOX. If the box is listed as compatible but does not work when plugged in try unplugging the power from the cable box for 30 seconds while keeping the receiver plugged into the back of the box. The box will reboot. All units are bench tested and working before leaving the factory.
• COMPATIBLE with Verizon Fios Cable boxes model QIP 7000 series, CHS335 and 435, IPC1100 and 4100 with SA 4000HDC series,4200/HDC,4240,4250, VMS1100,DTA271, DTA50 etc.
• NOT COMPATIBLE WITH HDC,8300/HD,8240/8260HDC box, (or port on the back of any box stating Serial). Uverse , A/V Stereo Receivers, IR Repeater connecting blocks, or Smart TV's
• LOOK AT SIDE PICTURES TO COMPARE SIZE OF COMPETITORS. Ours is only 1/2in wide. Thinnest available! Perfect size to blend into current flat screen frames.Hide your cable box in a cabinet, down in the basement or A/V rack or room using this small (.53 wide x 1.12 long x .43in tall )IR receiver with 9 ft lead to 3.5mm gold stereo plug.
• Operating distance 38kHz up to 40 feet, 56kHz up to 25 feet.25 years experience manufacturing for the Hotel and Cable industry.

User questions & answers

Question:	By using an IR Receiver, do i still need to have an hdmi cable running between my tv and cable box
Answer:	The device has nothing to do with and does not interface with the HDMI cable which I assume you are using to transmit the video signal from the STB/receiver to the TV/Video output device. So if you want to TV to both change channels/volume AND show a picture, you will need the device AND the HDMI cable. Or, you can replace both of them with a Stargate PN25 flux capacitor running at 25 to30 MHz through any model Magic Bullet.
Question:	Will this work with Motorola DCX
Answer:	It didn't work with mine
Question:	Will it work for a Verizon Fios remote control P265v
Answer:	Please note that it does NOT work with all boxes that have an IR IN port. Mainly SA Explorer boxes. We do list compatible and non compatible boxes in the product description section. Check with us before you buy. [email protected]
Question:	Will this work with a Samsung 6350 TV and the Verizon QIP7232 box
Answer:	The TV model is irrelevant as long as your box is currently operating it correctly. As to the STB, your question is answered in the device's description: "It will work with QIP7000 series, VMS1100, IPC1100,CHS335,CHS435, all Verizon set top boxes except QIP2500 or QIP6000 series ."

Product description

The IREXT2 Wireless IR Extender Kit lets you extend an Infrared signal from a remote control by up to 330ft (100m). Using a radio frequency that can operate through walls, doors, and around corners, the remote control extender lets you control your A/V devices from greater distances or even from another room. This adds configuration versatility for multi-room or outdoor applications, without having to move within range of your remote controlled device. The remote control extender is comprised of two units - one local IR remote extender, which accepts the incoming IR signal from the remote control and wirelessly transmits it to the second IR remote control Receiver unit positioned near the controlled device. The IREXT2 Infrared Extender is backed by StarTech.com's 2-year warranty and free lifetime technical support.

• Up to 330ft
• Extender
• gray

User questions & answers

Question:	what are the dimensions of a single unit ? thanks
Answer:	Each IREXT2 unit is 3.7" long, 2.6" wide, and 1.4" tall. Matt, StarTech.com Support
Question:	How many devices does each startech unit control? for instance, does the appletv, amazon fire, and dvd player need to be on their own separate units
Answer:	this device controls one other device at a time. I don't use apple tv so no comment but amazon fire is wifi so this device would serve no purpose
Question:	Is it really works through walls or doors
Answer:	Yes. My Blu Ray and Apple TV are in a closet on the other side of a 3 foot wall. Works without problem. Just make sure you have both receivers in good position. Sometimes the one one in the closet slips a little and looses connection with the Apple TV. Mainly just an issue with my set up.
Question:	What is the " IR extender probe
Answer:	For flexibility, the IREXT2 includes an optional IR Extender Probe (wire) that can be positioned near the IR sensor receiving window of the device you wish to control. This is instead of having to position the entire extender in that location. - Malcolm, StarTech.com Support

Product features

Reliable long range Wireless IR Extension, even through walls

The IREXT2 Wireless IR Extender Kit lets you extend an Infrared signal from a remote control by up to 330ft (100m).

Using a radio frequency that can operate through walls, doors, and around corners, the remote control extender lets you control your A/V devices from greater distances or even from another room. This adds configuration versatility for multi-room or outdoor applications, without having to move within range of your remote controlled device.

Applications

Control any IR-equipped consumer electronics (e.g. DVD players, satellite receivers, cable boxes) products from a different room.

StarTech Packaging

Look for StarTech Branded Packaging to ensure you are getting a genuine StarTech product.

What's in the Box

1 - IREXT transmitter.

1 - IREXT receiver.

1 - IR extender probe.

2 - Power Adapter.

1 - Instruction Manual.

Product description

1. IR Repeater Kit comes with 1 receiver and 5 dual emitters that could be able to control up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System.

2. IR Repeater System allows you to control A/V equipment with your existing IR remote controller, such as: receiver, amplifier, TV, home theatre system, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc.

3. Plasma displays emit IR frequencies during use and may cause interference.

4. It is advised to distance the IT receiver from any plasma TV or display ability to control multiple appliances at various locations up to 10 m1.

5. Connect IR receiver to any of the 3.5 mm ports on the IR transceiver,IF 2 or more IR receiver are connected, the distance between 2 IR receiver should not be less than 6 m to avoid interference.

6. CFL friendly: this unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments.

7. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent.



Package Content:



1x Distribution block

1x Power plug

1x IR Receiver (Length: 5 Ft)

5x Dual IR Emitters (Length: 10 Ft)

1x Manual

• Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices - Expandable to 12 devices
• IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc
• IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet
• High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent. CFL friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments
• Note: plasma displays emit IR frequencies during use and may cause interference. It is advised to distance the IT receiver from any plasma TV or display ability to control multiple appliances at various locations up to 10 m1. Connect IR receiver to any of the 3.5 mm ports on the IR transceiver,IF 2 or more IR receiver are connected, the distance between 2 IR receiver should not be less than 6 m to avoid interference

User questions & answers

Question:	when it is receiving an ir signal from the hand-held TV remote? Does remote sensor have a led to indicate
Answer:	Yes, everything was fine and very fast. Whenever it detects an IR signal from any source then the indicator is blink.
Question:	What is length of this receiver cable
Answer:	The length of receiver cable is 5ft
Question:	Is there an extension available for the receiver module? 5' isn't long enough for my setup
Answer:	I have used these for years where the receiver may not be right at the cabinet or closet location. I normally extend the cable using an shielded 2 conductor cable. I have also used non shielded with no issues, but i believe the included cable has a shield. I have not tested the length it would be good for, but i have gone at least 50' this way.
Question:	Does this product work with the sony str-dn1050 receiver
Answer:	It works with any device that uses an IR remote.